Circuitos integrados

MAX1068AEEG+T

MAX1068AEEG+T - 14-Bit 200ksps Multi-Channel SAR ADC | Maxim Integrated

The Maxim Integrated MAX1068AEEG+T is a 14-bit, 200ksps, multi-channel successive-approximation analog-to-digital converter (SAR ADC) housed in a 24-pin QSOP package. It integrates an analog input multiplexer with up to 8 single-ended or 4 pseudo-differential analog inputs, an on-chip track-and-hold amplifier, a precision reference input, and a high-speed serial interface. The device operates from a single +5V analog supply with low power dissipation suitable for battery-powered and line-powered instrumentation systems. An SAR ADC (Successive Approximation Register Analog-to-Digital Converter) is a type of data acquisition IC that uses a binary-search algorithm against an internal DAC to digitize an analog input one bit per clock cycle. SAR ADCs occupy a middle ground between flash converters (fastest, lowest resolution) and sigma-delta ADCs (highest resolution, lowest speed) and are favored in multi-channel data-acquisition, industrial control, and process-control applications where deterministic latency and 12-16-bit resolution are required. Key features of the MAX1068AEEG+T include a maximum sampling rate of 200 ksps, SINAD of 84 dB (81 dB minimum), SNR of 84 dB, SFDR of 99 dB (86 dB minimum), and a full-power bandwidth of 4 MHz at the -3dB point. The internal digital interface uses SPI/QSPI/MICROWIRE-compatible serial communications, simplifying connection to a wide range of microcontrollers, DSPs, and FPGAs. The 24-pin QSOP footprint provides a compact 0.154 inch body width with gull-wing leads, ideal for high-density board designs. Architecturally, the device combines a capacitive-DAC-based SAR core, a low-noise input track-and-hold, an 8-channel analog input multiplexer, and an integrated reference buffer. The MAX1068AEEG+T accepts an external +4.096V reference voltage and offers hardware- or software-controlled channel selection. The combination of 200ksps throughput, 14-bit resolution, and integrated input mux makes it a strong fit for cost-sensitive multi-channel data-acquisition systems where PCB area is at a premium. Typical applications include industrial process control, multi-channel data loggers, portable battery-powered instrumentation, sensor signal conditioning front ends, patient monitoring equipment, and programmable logic controller (PLC) analog input modules. The wide input range and low power also support handheld test equipment and medical instrumentation front ends. When designing with this device, ensure the external +4.096V reference is well bypassed with a low-ESR capacitor placed close to the REF pin, and that the analog input traces are guarded against digital switching noise. The QSOP-24 package has a thermal resistance of approximately 80 C/W and operates over the industrial 0C to +70C temperature range. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical layout guidance that goes beyond the manufacturer datasheet alone.

Cotización Contacto

MAX1068CCEG+

MAX1068CCEG+ - 14-Bit 200ksps 4Ch SAR ADC | Maxim Integrated

The Maxim Integrated MAX1068CCEG+ is a low-power, multichannel, 14-bit, 200 ksps successive-approximation analog-to-digital converter (ADC) housed in a 24-pin QSOP package. According to the Maxim datasheet, it integrates a precision +4.096 V reference, a reference buffer, an internal oscillator, automatic power-down, and a high-speed SPI/QSPI/MICROWIRE-compatible serial interface, enabling a complete 4-channel data-acquisition front end in a single 5 mm x 4 mm IC. The device accepts single-ended analog inputs across 4 channels and operates from a single +5 V analog supply with a digital supply range compatible with 1.8 V to 5 V logic. A successive-approximation register (SAR) ADC is a precision converter architecture that uses a binary-search algorithm combined with an internal sample-and-hold and a precision comparator. SAR ADCs deliver deterministic latency, no pipeline delay, and excellent DC accuracy, making them the preferred choice for multiplexed multi-channel data acquisition, industrial process control loops, and precision instrumentation where small signal levels and low noise are required. The MAX1067/MAX1068 family sits at the entry-tier of high-performance SAR ADCs, occupying the niche between microcontrollers' internal ADCs and dedicated high-speed pipeline converters. Key features of the MAX1068CCEG+ include true 14-bit resolution with no missing codes, 200 ksps aggregate throughput, integrated +4.096 V reference, software-configurable unipolar/bipolar input ranges, automatic channel scanning, and an automatic power-down mode that reduces supply current to microampere levels between conversions. The internal oscillator eliminates the need for an external clock, and the dedicated reference buffer preserves the +4.096 V reference accuracy even when driving the converter core at full speed. Typical applications include multichannel analog input modules in PLCs and DCS systems, portable industrial data loggers, isolated front ends for sensor arrays (thermocouples, RTDs, strain gauges, pressure transducers), patient monitoring instrumentation, weigh scales, and general-purpose 4-channel data-acquisition boards. The wide operating temperature range and small QSOP-24 footprint suit densely populated backplanes and battery-powered portable instruments. When designing with the MAX1068CCEG+, place the +5 V supply decoupling network (10 uF bulk plus 0.1 uF ceramic) within 5 mm of the AVDD pin and keep the analog/digital ground returns separated under a star-ground topology. The internal reference is sufficient for 14-bit performance, but applications that require 1 LSB absolute accuracy across the full -40 C to +85 C range should consider an external reference.

Cotización Contacto

MAX1069AEUD+

MAX1069AEUD+ - 14-Bit 58.6ksps 2-Wire Serial ADC | Maxim

The Maxim Integrated (now Analog Devices) MAX1069AEUD+ is a low-power, 14-bit, 58.6 ksps successive-approximation register (SAR) analog-to-digital converter (ADC) housed in a 14-pin TSSOP package. It features a 2-wire I2C-compatible serial interface, an internal 4.096 V reference, and four address-select inputs (ADD0-ADD3) that allow up to 16 MAX1069 devices to share a single bus. The device operates from a 4.75 V to 5.25 V analog supply, with a separate digital supply range of 2.7 V to 5.25 V for flexible logic-level interfacing. What is a SAR ADC? A successive-approximation register analog-to-digital converter is a type of data converter that uses a binary-search algorithm against an internal DAC to resolve an analog input to N bits in N clock cycles. SAR ADCs offer an attractive trade-off between sample rate (typically 1 ksps to 1 Msps), resolution (8 to 20 bits), power consumption, and latency, making them the workhorse of mid-speed precision measurement applications where single-shot or burst conversions are needed. They sit in the broader hierarchy: ADC -> data converter -> mixed-signal IC -> semiconductor. Key features of the MAX1069AEUD+ include automatic power-down between conversions (reducing supply current to microampere levels), an on-chip 4 MHz oscillator, software-configurable unipolar/bipolar input ranges, and an internal or external reference option. The 14-pin TSSOP footprint is pin-compatible with the higher-resolution 16-bit MAX1169 family, allowing easy migration when system SNR requirements grow. The MAX1069 architecture combines a capacitive-DAC SAR core with an input track-and-hold, a comparator, and a sequencer. The internal 4.096 V reference provides approximately 1 LSB = 250 uV at full-scale, while the wide digital supply range permits direct connection to 3 V or 5 V microcontrollers without level shifters. This combination is well suited to portable instrumentation, medical monitors, and solar-powered remote sensor nodes where both precision and low quiescent current are required. Typical applications include handheld portable instruments, medical instrumentation, battery-powered test equipment, solar-powered remote systems, received-signal-strength indicators (RSSI) for RF links, and system supervision in industrial control. Designers should note that decoupling the analog and digital supplies with separate 0.1 uF + 10 uF capacitors is essential, and the I2C address is set by hard-wiring ADD0-ADD3 to GND or VDD before power-up. This page synthesizes distributor stock, drop-in pin-compatible alternatives, and practical layout notes that are not present in the bare datasheet, giving engineers a single decision-ready reference for the MAX1069AEUD+.

Cotización Contacto

MAX1069AEUD+T

MAX1069AEUD+T - 14-Bit 58.6ksps I2C SAR ADC | Analog Devices

The Analog Devices (formerly Maxim Integrated) MAX1069AEUD+T is a low-power, 14-bit, 58.6 ksps successive-approximation analog-to-digital converter (SAR ADC) in a 14-pin TSSOP package with automatic power-down, an on-chip 4 MHz clock, a +4.096 V internal reference, and an I2C-compatible 2-wire serial interface supporting both fast-mode (400 kHz) and high-speed-mode (1.7 MHz) operation. A SAR ADC is a successive-approximation-register analog-to-digital converter: a sample-and-hold captures the input, an internal DAC and comparator walk through each bit from MSB to LSB in one clock cycle per bit, and the digital result is latched out. SAR ADCs are valued for deterministic latency, low latency, no pipeline delay, and excellent DC accuracy. As a data converter, this device belongs to the broader hierarchy: ADC -> data converter -> signal chain IC -> mixed-signal semiconductor. Key features include 14-bit resolution, 58.6 ksps sampling rate, single +2.7 V to +5.25 V analog supply, a 4.096 V internal reference, four address-select pins (ADD0-ADD3) that allow up to 16 MAX1069 devices on the same I2C bus, automatic power-down between conversions to minimize current draw, and an I2C/SMBus-compatible 2-wire serial interface. The TSSOP-14 footprint is one of the most common small-outline surface-mount packages in the TSSOP family of thin-shrink small-outline packages. The architecture combines a capacitive-charge redistribution DAC with an on-chip clock and reference, eliminating most external components. Power-down currents drop to the sub-microamp region between conversions, making the part well suited to duty-cycled or battery-aware designs where the MCU wakes, takes a reading, and sleeps. Typical applications include handheld portable instrumentation, medical instruments, battery-powered test equipment, solar-powered remote systems, received-signal-strength indicators (RSSI), and system supervision. Designers usually select the MAX1069AEUD+T when they need a small, low-power, 14-bit accurate ADC with an easy I2C interface and multi-drop addressing on a tightly board-constrained PCB. When designing, observe the analog/digital supply decoupling guidance in the manufacturer datasheet, place the reference bypass capacitor close to REF, and keep the analog input traces short and guarded. Avoid driving the analog input beyond the supply rails to prevent ESD latch-up, and respect the maximum I2C clock rate of the chosen bus mode. This page combines distributor pricing, drop-in pin-compatible alternatives, and practical design notes curated from the manufacturer datasheet, going beyond what the datasheet alone provides.

Cotización Contacto

MAX1070CTC+

MAX1070CTC+ - 1.5Msps 10-Bit Differential ADC | Analog Devices

The Analog Devices MAX1070CTC+ is a 1.5Msps, single-supply, low-power, true-differential, 10-bit analog-to-digital converter (ADC) with serial output, housed in a 12-pin TQFN package. It operates from a single +5V analog supply and a separate +2.7V to +5.25V digital supply, making it suitable for mixed-signal boards where the digital logic runs from a lower rail than the analog front end. A Successive Approximation Register (SAR) ADC is a converter architecture that resolves each digital code one bit at a time using an internal precision DAC and a comparator, trading raw speed for very low power dissipation and inherent latency determinism. Within the broader product hierarchy, SAR ADCs sit under the ADC IC family, which itself is a sub-category of data converters and ultimately of mixed-signal / power-management semiconductor ICs. The MAX1070's 1.5Msps throughput, true-differential analog inputs and SPI/QSPI/MICROWIRE-compatible serial interface place it firmly in the mid-speed, low-power tier of this hierarchy, between precision 16-/18-bit converters and kilosample-per-second delta-sigma converters. Key features include true-differential analog inputs for better common-mode noise rejection, a high-impedance analog input stage with ±VREF input range, internal +2.5V reference, an external reference option, and a power-down mode that drops supply current to a few microamps between conversions. The serial interface eliminates parallel digital bus noise on the PCB and allows the device to be used with virtually any microcontroller or FPGA. Built-in track-and-hold and a wide ±0.5 LBN INL/DNL specification deliver predictable linearity for closed-loop control loops. Typical applications include motor-control current/voltage sensing, industrial process-control analog front ends, portable instrumentation with battery-saving power-down sequencing, and optical/sensor signal conditioning. The MAX1070's low quiescent current and small TQFN footprint suit it particularly to space-constrained or thermally sensitive embedded designs. Designers should observe the analog and digital ground separation recommended in the manufacturer datasheet and place the decoupling capacitor as close as possible to the supply pins.

Cotización Contacto

MAX1070CTC+T

MAX1070CTC+T - 1.5Msps 10-Bit SAR ADC | Analog Devices/Maxim

The Analog Devices (formerly Maxim Integrated) MAX1070CTC+T is a 1.5Msps, single-supply, low-power, true-differential, 10-bit successive-approximation analog-to-digital converter (ADC) housed in a 12-pin WQFN (HVQCCN) package. It operates from a single 2.7V to 3.6V analog supply and supports true-differential analog inputs, with throughput up to 1.5 million samples per second over an SPI-/QSPI-/MICROWIRE-compatible serial interface. The integrated 2.5V on-chip reference and low 3.2mA (typ) operating current make it attractive for power-constrained data-acquisition designs. What is a SAR ADC? A successive-approximation-register analog-to-digital converter is a sampled-data ADC class that uses a binary-search algorithm against an internal DAC to resolve each conversion in N clock cycles (N = resolution in bits). SAR ADCs sit in the broader hierarchy ADC -> data converter -> mixed-signal IC -> semiconductor, and are favored over delta-sigma and pipeline ADCs for multiplexed-channel, low-latency, medium-resolution (8-16 bit) applications because they require no digital filtering and offer deterministic latency. Key differentiating features of the MAX1070CTC+T include the true-differential input architecture (rejecting common-mode noise in industrial environments), an integrated 2.5V internal reference (eliminating an external reference IC and saving board area), a hardware/software shutdown pin that reduces supply current to ~1µA between bursts, and a 10MHz SPI-compatible serial interface that minimizes pin count and simplifies optocoupling to isolated controllers. The 12-pin WQFN (HVQCCN, 4x4 mm) footprint is thermally efficient and suitable for hand-solderable QFN replacement in low-volume designs. The T suffix denotes tape-and-reel packaging for high-volume SMT assembly. Typical applications include industrial process-control loops (4-20mA sensor digitization), portable instrumentation and battery-powered data loggers, multichannel data-acquisition (DAQ) systems, optical-module monitoring, and ultrasound or vibration front-ends where the differential input improves rejection of ground-bounce and motor noise. When designing with this part, place 0.1µF bypass capacitors as close as possible to AVDD and DVDD, and add a 10µF bulk tantalum on AVDD. The internal reference noise is typically 2.4mV p-p; for systems requiring lower noise, override REF with an external 2.5V reference such as the MAX6143. The shutdown pin (SHDN) can be driven from a logic output or tied high for always-on operation. This page aggregates distributor pricing, pin-compatible drop-in alternates, and practical layout notes not bundled in the manufacturer datasheet alone.

Cotización Contacto

MAX1070ETC+

MAX1070ETC+ - 1.5Msps 10-Bit Differential ADC | Maxim Integrated

The Maxim Integrated (Analog Devices) MAX1070ETC+ is a 1.5Msps, single-supply, low-power, true-differential, 10-bit analog-to-digital converter (ADC) housed in a 12-pin TQFN-EP package. The serial-output SAR architecture delivers 1.5Msps conversion rate while consuming low power, and the true-differential analog inputs simplify signal conditioning in noisy industrial environments. What is a SAR ADC? A successive-approximation-register (SAR) ADC is a type of analog-to-digital converter that uses a binary search through an internal DAC to converge on the input voltage, producing a digital output word in N conversion clock cycles for an N-bit result. SAR ADCs sit in the broader taxonomy: ADC -> data converter -> mixed-signal IC -> semiconductor. They are valued for their deterministic latency, low power consumption, and excellent DC accuracy compared with delta-sigma or pipeline architectures. The MAX1070ETC+ operates from a single +3V supply and accepts true-differential analog inputs, making it well-suited for rejecting common-mode noise in motor-control, instrumentation, and sensor-signal applications. Key differentiating specifications include the 1.5Msps sampling rate, true-differential input architecture, low power consumption, and a compact 12-pin TQFN-EP package with an exposed thermal pad for improved thermal performance. The MAX1070ETC+ uses a successive-approximation-register (SAR) core with an internal track/hold, input multiplexer, and high-speed serial interface. The device accepts true-differential analog inputs that simplify direct connection to bridge sensors, thermocouples, and current-shunt amplifiers without external signal-conditioning op-amps. Typical applications include industrial process control, motor control and feedback loops, portable instrumentation, data acquisition systems, and sensor signal chains. The 1.5Msps throughput enables oversampling for averaging or digital filtering of low-frequency signals. When designing with this ADC, ensure the serial clock (SCLK) timing meets the datasheet setup-and-hold requirements. Place a 0.1uF bypass capacitor close to the supply pin and follow PCB layout guidelines to minimize digital-feedthrough coupling into the analog inputs. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto

MAX1070ETC+T

MAX1070ETC+T - 1.5Msps 10-Bit True-Diff ADC | Maxim Integrated

The Maxim Integrated MAX1070ETC+T is a 1.5Msps, single-supply, low-power, true-differential, 10-bit analog-to-digital converter (ADC) with serial output, housed in a 12-pin TQFN-EP package. It operates from a single +3V analog supply (2.7V to 3.6V) and a separate 1.8V to 3.6V digital supply, supports true-differential analog inputs, and is specified over the -40C to +85C industrial temperature range. An ADC (Analog-to-Digital Converter) is a data-conversion integrated circuit that samples continuous analog signals and translates them into discrete binary codes for digital processing. Within the broader semiconductor taxonomy, the MAX1070 sits in the hierarchy: ADC -> data converter -> mixed-signal IC -> semiconductor. The MAX1070 family uses a successive-approximation-register (SAR) architecture with an integrated track/hold amplifier, an internal bandgap reference, and a high-speed serial interface, achieving up to 1.5Msps throughput while drawing only milliwatts of power. This makes it a member of the precision-converter category targeting low-power, space-constrained applications. Key features include a maximum sampling rate of 1.5Msps, true-differential analog inputs for superior common-mode noise rejection, an internal +2.5V reference (with external-reference option), a low-voltage SPITM/QSPITM/MICROWIRE-compatible serial interface, and an external shutdown input that reduces supply current to microampere levels. The device also supports bipolar analog input ranges when driven differentially around the common-mode voltage, and operates over the full -40C to +85C industrial temperature range. The MAX1070 is built on a BiCMOS process that combines low-noise CMOS analog signal paths with high-speed bipolar switching for the SAR logic and serial interface. The track/hold amplifier supports input bandwidths well above Nyquist for the 1.5Msps rate, and the differential input stage rejects common-mode noise from motors, switching power supplies, and long PCB traces. Typical applications include portable instrumentation, pen digitizers and tablets, battery-powered data loggers, isolated industrial sensor front-ends, and high-speed process-control loops. The wide input common-mode range allows direct connection to bridge sensors, thermocouple amplifiers, and current-sense amplifiers without additional signal conditioning. When designing with this device, provide a clean analog ground plane and decouple AVDD and DVDD with separate 0.1uF and 10uF ceramic capacitors placed as close as possible to the supply pins. The serial interface timing budget must respect the tACQ and tCONV specifications referenced in the manufacturer datasheet to avoid conversion errors at full speed. This page synthesizes distributor pricing, drop-in same-package alternatives, and application guidance for engineers selecting a 10-bit 1.5Msps differential ADC in a 12-pin TQFN.

Cotización Contacto

MAX1071CTC+T

MAX1071CTC+T - 1.5Msps 10-Bit Differential SAR ADC | Analog Devices

The Analog Devices (formerly Maxim Integrated) MAX1071CTC+T is a 1.5Msps, single-supply, low-power, true-differential, 10-bit successive-approximation analog-to-digital converter (SAR ADC) housed in a 12-pin TQFN (4x4 mm) package with an exposed thermal pad. The part delivers up to 1.5 million samples per second through a high-speed SPI/QSPI/MICROWIRE-compatible serial interface, while drawing only a few milliwatts of power from a single 2.7V to 3.6V analog supply. According to the manufacturer datasheet, the MAX1070 and MAX1071 are pin-compatible family members that differ primarily in resolution (MAX1070 is 12-bit, MAX1071 is 10-bit), giving designers a migration path between precision levels without PCB rework. A successive-approximation ADC is a type of data converter that converts an analog input voltage into a digital code through a binary-search algorithm using an internal DAC and comparator. SAR ADCs sit in the hierarchy: ADC -> data converter -> data acquisition IC -> signal chain IC -> semiconductor. They are favored for applications requiring high accuracy, low latency, and deterministic sampling, which sets them apart from delta-sigma ADCs (higher resolution, slower) and pipeline ADCs (very fast, higher latency). The MAX1071 belongs to the SAR family. Key features include true-differential analog inputs for superior common-mode noise rejection, an internal 2.5V reference (with the option to drive an external reference), an SPITM/QSPI/MICROWIRE-compatible serial interface, and a hardware- or software-controlled shutdown mode that drops supply current to the microampere range between conversions. The 12-pin TQFN package offers a compact 4x4 mm footprint with an exposed pad for low thermal resistance and improved electrical grounding. The +T suffix indicates tape-and-reel packaging for high-volume assembly. From an architecture standpoint, the MAX1071 uses a capacitive-charge-distribution DAC combined with a high-bandwidth comparator and a precision 2.5V bandgap reference. The true-differential input structure allows direct measurement of bridge sensors, thermocouples, and other small differential signals without external instrumentation amplifiers, which simplifies the analog front-end and reduces total BOM cost. Typical applications include industrial process control, data acquisition systems, portable instrumentation, battery-powered sensor monitoring, optical module monitoring, and motor control feedback loops. The differential input architecture also makes it well-suited to medical instrumentation front-ends and sonar/radar intermediate-frequency sampling where ground noise is a concern. A key design consideration is input common-mode voltage and source impedance: the input sampling capacitors require adequate settling time, so place a low-impedance buffer or anti-alias RC network immediately ahead of AIN+ and AIN-. For best linearity, drive REF+ directly from a low-noise reference source and decouple REF- to analog ground with a 0.1uF ceramic capacitor placed within a few millimeters of the pin. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, helping engineers choose and qualify the MAX1071CTC+T with confidence.

Cotización Contacto

MAX1076CTC+T

MAX1076CTC+T - 10-Bit 1.8Msps SAR ADC, True-Diff, 12-TQFN | Maxim

The Maxim Integrated (Analog Devices) MAX1076CTC+T is a 10-bit, 1.8Msps, single-supply, low-power, true-differential, successive-approximation analog-to-digital converter (SAR ADC) with an internal reference, housed in a 12-pin TQFN (4x4 mm) package. The MAX1076/MAX1078 family combines a 1.8 Msps sample rate with true-differential inputs and an integrated precision reference, eliminating the need for an external reference in most designs. The +T suffix indicates Tape & Reel packaging per Maxim/Analog Devices ordering convention. An SAR (Successive Approximation Register) ADC is a type of analog-to-digital converter that performs a binary search through successive bit-weights using an internal DAC and a sample-and-hold circuit. SAR ADCs occupy the speed/resolution sweet spot between slow slope converters and high-speed flash ADCs, and are widely used for data acquisition, instrumentation, and process control where 8-16 bits and 100 ksps to several Msps are required. The MAX1076CTC+T belongs to this category, and as a true-differential part it rejects common-mode noise from industrial sensor front-ends - a key advantage in motor control and PLC analog input modules. Key features include a true-differential analog input, internal 2.5 V reference, single 2.7 V to 3.6 V supply operation, SPI/QSPI/MICROWIRE-compatible serial interface, low power consumption, and a hardware shutdown pin for battery-powered systems. The serial-interface architecture minimises pin count to just 12 pins while supporting daisy-chain connection to ADCs sharing the same bus. The MAX1076CTC+T uses a charge-distribution DAC array and an on-chip sample/hold, achieving 10-bit linearity at 1.8 Msps with low integral non-linearity (INL) and differential non-linearity (DNL) suitable for instrumentation and control loops. The internal reference eliminates external reference drift concerns, simplifying BOM cost and board area. Typical applications include portable instrumentation, data acquisition systems, process control loops, medical instrumentation, and battery-powered sensor interfaces. The combination of true-differential input and integrated reference makes the part particularly attractive for industrial 4-20 mA loop receivers and motor-control current-sense paths. When designing with this device, allocate adequate PCB space for the exposed pad (EP) - it must be soldered to the ground plane for thermal dissipation and electrical performance. Use low-ESR ceramic bypass capacitors as recommended by the datasheet and verify the common-mode voltage at the inputs remains within the input common-mode range. This page synthesises distributor pricing, drop-in alternatives, and practical design notes beyond what is shown on the manufacturer datasheet or distributor product listings.

Cotización Contacto

MAX1078CTC+

MAX1078CTC+ - 10-Bit 1.8MSPS Differential ADC | Maxim Integrated

The Maxim Integrated MAX1078CTC+ is a 1.8Msps, single-supply, low-power, true-differential, 10-bit analog-to-digital converter (ADC) with an internal reference, housed in a 12-pin TQFN (4x4) package. It is part of the MAX1076/MAX1078 family of high-speed, serial-output ADCs targeting data-acquisition applications where low power, small footprint, and true-differential input capability are essential. An ADC (Analog-to-Digital Converter) is a data-conversion integrated circuit that samples a continuous analog input voltage and produces a discrete digital code representing its magnitude, using successive-approximation or pipeline architectures. The MAX1078 specifically uses a successive-approximation register (SAR) topology, which provides deterministic latency (single conversion cycle) and inherently low power consumption at moderate sample rates - making it well suited to multiplexing between multiple sensor channels in industrial and instrumentation systems. Key differentiating features include a true-differential analog input (rejecting common-mode noise that single-ended ADCs cannot), an internal 2.5V reference (eliminating external reference components and saving board area), a high-speed SPI/QSPI/MICROWIRE-compatible serial interface, and a low 1.8MSPS throughput that oversamples audio and vibration bands. The device operates from a single +2.7V to +3.6V analog supply and a +1.8V to +3.6V digital supply, simplifying power-tree design in 3.3V systems. The MAX1078 employs a switched-capacitor input stage optimized for signals from DC to several hundred kHz, with input bandwidth exceeding 4MHz. Its successive-approximation architecture, charge-redistribution DAC, and on-chip clock generate conversions with no pipeline delay, allowing direct use in closed-loop control or multiplexed data-acquisition front-ends. Typical applications include data-acquisition systems, portable instrumentation, pen-digitizers and tablets, loop-powered industrial transmitters, and vibration / audio monitoring. The wide input common-mode range and integrated reference make the device especially attractive for sensors with ground-referred or remotely-grounded outputs. When designing with the MAX1078, place the 0.1uF and 10uF decoupling capacitors as close as possible to the AVDD/DVDD pins and route the digital SPI lines with reference to a solid ground plane, ideally with series termination to suppress reflections. For best dynamic performance, drive the true-differential inputs (IN+ and IN-) symmetrically and keep input traces length-matched. This page synthesizes distributor pricing, drop-in alternatives, and PCB-level design notes not found in the manufacturer datasheet, enabling faster part selection and schematic entry.

Cotización Contacto

MAX1078CTC+T

MAX1078CTC+T - 1.8Msps 10-Bit Differential ADC | Maxim Integrated

The Maxim Integrated MAX1078CTC+T is a 1.8 Msps, single-supply, low-power, true-differential, 10-bit analog-to-digital converter (ADC) with an internal reference, housed in a 12-pin TQFN-EP package. The part is a high-speed, serial-output successive-approximation ADC designed for low-power applications, offering a fully differential input stage with bipolar input range capability when used with external resistors. An ADC (analog-to-digital converter) is a mixed-signal integrated circuit that converts continuous analog voltages into discrete digital codes. The MAX1078 belongs to the successive-approximation register (SAR) ADC family, which uses a binary-search algorithm with an internal DAC to compare the input against successive reference voltages, settling in N clock cycles for an N-bit resolution. SAR ADCs are prized for their deterministic latency, low power consumption, and ease of use in multiplexed data-acquisition systems. Key features of the MAX1078CTC+T include a 1.8 Msps maximum sampling rate, true-differential analog inputs capable of unipolar (0 to VREF) or bipolar (±VREF) operation, an internal 2.5 V precision reference, an external clock input, and a SPITM/QSPITM/MICROWIRETM-compatible serial interface. The device operates from a single +2.7 V to +3.6 V analog supply and draws a low quiescent current, making it suitable for battery-powered and portable instrumentation. The MAX1078 employs a charge-distribution DAC architecture with an input track-and-hold, achieving excellent dynamic performance at high sampling rates. The internal reference eliminates the need for an external reference IC, reducing BOM cost and PCB area. Hardware and software shutdown modes reduce supply current to <1 µA between conversions for further power savings in duty-cycled applications. Typical applications include portable instrumentation, data-acquisition systems, process-control monitoring, and digital sensor signal conditioning. The wide 2.7 V to 3.6 V supply range and small TQFN-12 footprint also suit space-constrained medical and industrial modules. When designing with the MAX1078, place the 0.1 µF and 10 µF decoupling capacitors as close as possible to the AVDD and DVDD pins and route the analog and digital ground planes separately, joining them at a single point beneath the exposed pad. The internal reference is bypassed with a 1 µF capacitor on REF. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design guidance drawn directly from the manufacturer datasheet and Maxim Integrated application notes, giving engineers a one-stop reference that complements the official product documentation.

Cotización Contacto

MAX1079CTC+

MAX1079CTC+ - 10-Bit 1.5Msps Differential ADC | Maxim Integrated

The Analog Devices / Maxim Integrated MAX1079CTC+ is a 1.5Msps, single-supply, low-power, true-differential, 10-bit analog-to-digital converter (ADC) with internal reference, housed in a 12-pin TQFN (HVQCCN) package. It operates from a +2.7V to +3.6V analog supply and a +1.8V to AVDD digital supply, supporting true-differential analog inputs for high-noise-immunity signal acquisition. An analog-to-digital converter (ADC) is a data acquisition component that converts continuous analog signals into discrete digital codes, forming the front-end of nearly every measurement, instrumentation, and sensor-interface system. Successive-approximation register (SAR) ADCs like the MAX1079 balance speed and resolution for multiplexed industrial channels. In the broader taxonomy, the MAX1079 sits under ADC -> data converter -> signal chain IC -> semiconductor. Key features include a 1.5Msps sampling rate, 10-bit resolution with no missing codes, a true-differential analog input with ±VREF common-mode range, an internal +2.5V precision reference, and SPI/QSPI/MICROWIRE-compatible serial interface. The part also offers an external reference option for applications requiring ratiometric measurements, plus a low-power shutdown mode that reduces supply current to < 1 µA for battery-powered designs. The MAX1079 uses a charge-redistribution SAR architecture with an input T/H, achieving excellent AC and DC performance at low power. A dedicated REF pin allows either the internal 2.5V reference or an external reference, giving designers flexibility between absolute and ratiometric conversions. The serial interface shifts out data MSB-first, simplifying firmware on most microcontrollers. Typical applications include industrial process control, data acquisition systems, portable instrumentation, medical instrumentation, and sensor signal conditioning. The wide input common-mode range makes it ideal for bridge sensors and thermocouple interfaces where ground offsets are common. When designing with this device, decouple AVDD and DVDD close to the IC with 0.1µF ceramic capacitors, and add a 10µF bulk capacitor at the supply pins. Maintain a clean analog ground return; digital return currents must not cross the analog ground plane under the ADC. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto

MAX1079CTC+T

MAX1079CTC+T - 1.5Msps 10-Bit Diff ADC, Internal Ref | Maxim

The Maxim Integrated MAX1079CTC+T is a 1.5Msps, single-supply, low-power, true-differential, 10-bit analog-to-digital converter (ADC) with an internal reference, packaged in a 12-pin WQFN (HVQCCN, 4x4 mm) with exposed thermal pad. According to the Maxim datasheet (datasheet identified by DigChip data ID 3279617), the MAX1077/MAX1079 family uses a successive-approximation architecture with a serial SPI/QSPI/MICROWIRE-compatible interface, operates from a single 2.7V to 3.6V analog supply, and dissipates a maximum of approximately 1.8 mA at 1.5 Msps full throughput. An ADC (analog-to-digital converter) is a data-acquisition integrated circuit that converts a continuous analog input voltage into a discrete N-bit binary code. Successive-approximation ADCs use an internal DAC and comparator to binary-search the input, trading off conversion speed against area and power. The MAX1079 sits in the broader hierarchy: ADC -> data converter -> data converter IC -> signal-chain IC -> semiconductor. Within Maxim's portfolio it belongs to the low-power, high-speed, serial-interface 10-bit SAR family. Key features of the MAX1079CTC+T include true-differential analog inputs (rejecting common-mode noise), an internal 2.5V reference (eliminating an external reference IC and saving board space), automatic shutdown between conversions for battery savings, and a small 4x4 mm WQFN-12 footprint suited to space-constrained PCBs. The MAX1079 differs from MAX1077 by offering 225ksps minimum throughput at the slower part number and 1.5Msps on the MAX1079. Architecturally, the device integrates an input track-and-hold, a charge-redistribution SAR core, an internal 2.5V bandgap reference, and a serial interface block. The internal reference eliminates external reference drift errors, while the true-differential input allows direct connection to bridge sensors, thermocouples via instrumentation amplifiers, and differential signal chains without an external differential amplifier in many cases. Typical applications include portable data acquisition, industrial process control loop monitoring, battery-powered instrumentation, medical sensor front ends, optical-module monitoring, and consumer audio level meters. The MAX1079 is particularly suited to systems that need more than 225 ksps but are power-sensitive on battery power. When designing with the MAX1079CTC+T, ensure the analog supply is well decoupled (1 uF + 0.1 uF) and that the exposed pad is soldered to a ground pour to provide a low-impedance thermal and electrical return. The serial-interface timing budget must respect the 1.5 Msps maximum fSAMPLE; higher SPI clock rates will not increase throughput beyond the converter's intrinsic limit. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that go beyond what is published in the manufacturer datasheet.

Cotización Contacto

MAX107ECS+

MAX107ECS+ - Dual 6-Bit 400MSPS ADC | Maxim Integrated

Maxim Integrated MAX107ECS+ is a dual-channel, 6-bit, 400MSPS flash analog-to-digital converter with an on-chip wideband input amplifier, supplied in an 80-pin TQFP exposed-pad package. The converter supports 3.3V to 5V operation and provides parallel and demultiplexed differential LVDS output options for high-speed baseband signal capture. An ADC is a data-conversion IC that samples an analog voltage and converts it into a digital value. Within the broader semiconductor hierarchy, the MAX107ECS+ is a flash ADC, a data-converter IC, and a high-speed signal-processing component. Flash architectures use a bank of comparators to perform single-cycle parallel conversion, making this device suitable for demanding acquisition stages rather than low-rate precision measurement. The MAX107ECS+ combines two conversion channels with a 6-bit code width and a maximum sampling rate of 400MSPS. Its on-chip wideband input amplifier reduces the external analog front-end required for many I/Q baseband systems. Demultiplexed differential LVDS outputs support reliable transfer of high-speed digital data between the converter and downstream processing electronics, while parallel output provides an alternative interface architecture. The manufacturer datasheet identifies the device as a dual 6-bit converter for fast and precise digitizing of in-phase and quadrature baseband signals. Its 400MSPS throughput gives each channel 2.5 ns between ideal sampling intervals. The 6-bit resolution provides 64 digital codes, making the converter particularly useful when system timing, gain, and signal-to-noise performance matter more than fine amplitude quantization. Typical applications include I/Q baseband digitization, communications receivers, radar signal processing, digital oscilloscopes, spectrum analyzers, and high-speed test equipment. Two integrated channels also support coherent sampling of quadrature signals, allowing one converter to process the in-phase and quadrature channels of a complex baseband waveform. PCB design should preserve the integrity of the differential LVDS clock and data paths. Place decoupling and analog-input components close to the relevant device pins, maintain the recommended package footprint and exposed-pad soldering pattern, and route high-speed outputs over a continuous reference plane with minimal stubs. Differential impedance and return-path discontinuities can degrade edge quality even when nominal sample-rate and resolution targets are met. This product page consolidates the MAX107ECS+ electrical characteristics, package details, application guidance, comparison information, and verified sourcing links. It also identifies the distinction between the base MAX107ECS ordering code and the MAX107ECS+ designation, helping engineers verify procurement configuration before PCB release.

Cotización Contacto

MAX1080BCUP+

MAX1080BCUP+ - 400ksps 10-Bit 8-Ch Serial ADC | Maxim Integrated

The Maxim Integrated MAX1080BCUP+ is a 400 ksps, single-supply, low-power, 8-channel, 10-bit successive-approximation analog-to-digital converter (SAR ADC) with an internal reference, high-bandwidth track/hold, and SPI/QSPI/MICROWIRE-compatible serial interface, housed in a 20-pin TSSOP package. What is a SAR ADC? A successive-approximation-register analog-to-digital converter is a type of data converter that uses a binary-search algorithm against an internal DAC to digitize an analog input, one bit per clock cycle. SAR ADCs occupy the middle ground between flash converters (fastest, lowest resolution) and sigma-delta converters (slowest, highest resolution), making them the workhorse choice for 8- to 16-bit, 100 ksps to 1 Msps general-purpose data-acquisition systems. The MAX1080 combines an 8-channel input multiplexer with a single ADC, allowing eight single-ended or four pseudo-differential analog inputs to be sampled sequentially. Key specifications include 400 ksps maximum sampling rate (300 ksps in some modes), single 4.5V to 5.5V analog supply, low 2.5 mA operating supply current, and an internal 2.5V reference. The TSSOP-20 (CUP) package saves board space while the serial interface reduces pin count versus parallel ADCs of the same generation. Internally, the MAX1080 uses a capacitive-charge-distribution DAC with input track/hold, an on-chip clock generator, and a serial-output shift register. The architecture delivers 10-bit no-missing-code performance with excellent dynamic range for its power class, and the internal reference eliminates the need for an external precision reference component. Typical applications include portable data loggers, system health monitoring, six-channel data acquisition front-ends, industrial process control loops, and battery-powered instrumentation. The wide analog input range (0 to VREF or 0 to 2xVREF in software-configurable modes) and low power make it especially suitable for multichannel embedded sensor reading. When designing with this device, ensure input RC antialiasing components are matched to the channel acquisition time; the multiplexer settling time limits high-impedance source accuracy. Always provide a clean analog ground separate from digital return paths to avoid code-dependent noise. This page synthesizes distributor pricing, drop-in equivalents, and practical design notes not found in the standalone Maxim datasheet.

Cotización Contacto

MAX1081BCUP

MAX1081BCUP - 10-Bit 300/400ksps 8-CH Serial ADC | Maxim Integrated

The Maxim Integrated MAX1081BCUP is a 10-bit, 8-channel, single-supply successive-approximation analog-to-digital converter (SAR ADC) that integrates an 8-input multiplexer, a high-bandwidth track/hold amplifier, an internal +2.5V reference, and an SPI/QSPI/MICROWIRE-compatible serial port. Housed in a 20-pin TSSOP package, it achieves up to 400 ksps throughput on a single +2.7V to +3.6V supply while consuming only 2.5 mA typical operating current. An SAR ADC is a successive-approximation register analog-to-digital converter - a category of data converter that uses a binary-search algorithm and an internal DAC to digitize an analog input one bit at a time per clock cycle. SAR ADCs occupy a middle position in the data-converter hierarchy between flash ADCs (fastest, lowest resolution) and sigma-delta ADCs (highest resolution, slowest). They deliver an excellent trade-off between speed, resolution, and power, which is why they dominate multi-channel, low-power embedded acquisition tasks. Key features include software-configurable analog inputs (unipolar/bipolar, single-ended/differential), four software-selectable power modes (normal, REDP, FASTPD, FULLPD), a hardware active-low SHDN pin, and automatic shutdown at the end of conversion to minimize battery drain. Internal +2.5V reference eliminates the need for an external reference in many designs, while analog inputs accept 0V-to-VREF or +/- VREF rails. The device combines a high-bandwidth track/hold (T/H) front-end that supports signals well beyond the Nyquist limit of its 400 ksps maximum sampling rate, ensuring accurate acquisition of fast transients. Its serial interface is SPI/QSPI/MICROWIRE-compatible, allowing direct connection to most microcontrollers and DSPs without glue logic. Typical applications include portable data acquisition, battery-powered instrumentation, multichannel sensor monitoring, process control, patient monitoring, and pen digitizers. The 8-channel input mux makes it well-suited for systems that must digitize multiple analog sources with one ADC. When designing with this part, place a 0.1uF bypass cap within 5 mm of VDD/REF pins and route analog and digital grounds separately back to a star ground to preserve the 10-bit linearity. AutoShutdown between conversions drops supply current to sub-microamp levels, so firmware should explicitly wake the part before each conversion burst. This page consolidates distributor stock, datasheet links, drop-in TSSOP-20 alternatives, and practical layout guidance not found on a single manufacturer page.

Cotización Contacto

MAX1082ACUE+T

MAX1082ACUE+T - 10-Bit 400ksps 4-Ch Serial ADC | Maxim

The Maxim Integrated MAX1082ACUE+T is a 10-bit resolution, 400 ksps (or 300 ksps for the MAX1082 grade), successive-approximation-register (SAR) analog-to-digital converter with a 4-input analog multiplexer, high-bandwidth track/hold, and an internal reference, all integrated into a 16-pin TSSOP package with tape-and-reel packaging. An ADC (analog-to-digital converter) is a data-conversion integrated circuit that samples a continuous-time analog signal and quantizes it into a digital code for processing by a microcontroller, FPGA, or DSP. SAR ADCs specifically use a binary-search successive-approximation algorithm, balancing speed, accuracy, and low power consumption, which makes them ideal for multiplexed data-acquisition systems. The MAX1082ACUE+T belongs to the broader hierarchy: SAR ADC -> ADC -> data converter -> mixed-signal IC -> semiconductor. Key features include a single-supply +2.7V to +3.6V analog supply (with a separate 3.3V-or-5V-tolerant digital interface on the MAX1083 variant), a hardware-configurable 2-channel or 4-channel analog input multiplexer (mux), an internal 2.5V reference, and a SPI/QSPI/MICROWIRE-compatible 4-wire serial interface that allows direct connection to most microcontrollers and DSPs without glue logic. The architecture pairs an input track/hold with the SAR core and an on-chip reference, eliminating the need for an external reference in many applications and reducing total BOM count. The wide input common-mode range and low analog-input leakage extend the device's usefulness in industrial sensor-interface designs. Typical applications include portable data logging, patient-monitoring and portable medical instruments, process-control analog I/O modules, and battery-powered instrumentation. The combination of low power consumption, small TSSOP-16 footprint, and 4-channel input mux makes it particularly well-suited to multi-sensor handheld designs where board space and battery life are at a premium. When designing with the MAX1082ACUE+T, ensure that decoupling capacitors are placed as close as possible to AVDD/DVDD, and that the analog and digital ground planes are joined at a single star point under the exposed thermal pad to minimize noise coupling into the SAR comparator. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the standalone manufacturer datasheet, providing engineers with a decision-ready procurement and design reference.

Cotización Contacto

MAX1082AEUE+TW

MAX1082AEUE+TW - 10-Bit 400ksps 4-Ch SAR ADC | Maxim Integrated

The Maxim Integrated MAX1082AEUE+TW is a 10-bit, 400ksps, single-supply, 4-channel serial analog-to-digital converter (ADC) with internal reference, housed in a 16-pin TSSOP package. The device accepts analog inputs from 0 to +5V on a single +5V supply and supports an external reference option. The +TW suffix denotes tape-and-reel packaging for high-volume assembly. An SAR (Successive Approximation Register) ADC is a type of data converter that performs a binary search through the input voltage using an internal DAC and comparator, delivering a fixed conversion time independent of input magnitude. SAR ADCs occupy a middle ground between slow but precise delta-sigma ADCs and fast flash ADCs, making them the workhorse choice for industrial control, instrumentation, and multi-channel data-acquisition front-ends where deterministic latency and 8-12 bit resolution are required. Key specifications of the MAX1082AEUE+TW include 400ksps sampling rate (300ksps variant MAX1083 also shares the family), 10-bit resolution with ±1 LSB linearity, four single-ended analog input channels multiplexed through an on-chip T/H (track-and-hold), an internal 4.096V reference, and an SPI/QSPI/MICROWIRE-compatible serial interface. The device operates from a single +5V analog supply and a separate +5V or +3V digital supply, drawing only 2.5 mA operating current. The MAX1082AEUE+TW architecture combines an input MUX with a wide-bandwidth T/H front-end to settle 10-bit conversions in under 2.5 us, then shifts the result out through a 4-wire serial port. Internal software-configurable power-down reduces supply current to under 10 µA between conversions, enabling battery-friendly periodic-sampling designs. Typical applications include industrial process control loops, weigh-scale and load-cell signal chains, portable battery instrumentation, multi-zone temperature monitoring, and 4-20 mA loop digitization. The internal 4.096V reference conveniently scales a 0-4V sensor output directly to full-scale 10-bit codes. When designing with this ADC, place 0.1 uF and 10 uF decoupling capacitors as close as possible to the AVDD and DVDD pins and route the analog ground (REF_) and digital ground (DGND) as separate traces meeting only at the device GND pin. For highest DC accuracy, enable the internal reference and avoid injecting digital switching currents into the reference node.

Cotización Contacto

MAX1082AEUE+W

MAX1082AEUE+W - 10-Bit, 4-Ch, 300ksps SAR ADC | Maxim Integrated

The Maxim Integrated MAX1082AEUE+W is a 10-bit resolution, 4-channel successive-approximation analog-to-digital converter (SAR ADC) capable of 300 ksps throughput in a 16-pin TSSOP package. The MAX1082 variant pairs the internal 2.5V reference with 300 ksps sampling; the closely related MAX1083 in the same family offers 400 ksps throughput for higher-speed designs. Both devices combine a 4-channel analog-input multiplexer, a high-bandwidth track/hold amplifier, and a serial (SPI/QSPI/MICROWIRE-compatible) interface on a single +2.7V to +3.6V supply. Background: An ADC (analog-to-digital converter) is a data-converter IC that translates real-world analog signals into digital codes for downstream processing by a microcontroller, DSP, or FPGA. Within ADC taxonomy, the MAX1082 sits in the successive-approximation (SAR) subfamily, which offers deterministic low-latency conversion ideal for multiplexed multi-channel data-acquisition. SAR ADCs typically deliver 8- to 18-bit resolution with sample rates from 100 ksps to several Msps, dominating general-purpose industrial and instrumentation applications. Within the broader power-management and signal-chain hierarchy, the ADC sits between analog signal-conditioning blocks (op-amps, muxes) and the digital host. Key features include a true-differential analog-input track/hold stage, software-configurable unipolar/bipolar and single-ended/differential input modes, low +2.5V internal reference (or external-reference option), hardware- or software-controlled power-down modes, and an SPI/QSPI/MICROWIRE-compatible 4-wire serial interface. The MAX1082AEUE+W operates from a single +2.7V to +3.6V supply and typically draws only 2.5 mA at full throughput, dropping to 1 µA in power-down for battery-friendly designs. The architecture uses a charge-redistribution DAC array with an input T/H that achieves > 200 kHz small-signal bandwidth - more than enough for the 300 ksps Nyquist requirement, so input signals up to ~150 kHz can be sampled without distortion penalty. The internal 2.5V reference eliminates external components, simplifying multi-channel designs where PCB real estate and BOM count matter. Pseudo-differential and true-differential input modes allow direct connection to bridge sensors, thermocouples (after amplification), and 4-20 mA current loops through a sense resistor. Typical applications include portable data logging, multi-channel process-control instrumentation, battery-powered measurement systems, factory-automation sensor interfaces, and patient-monitoring front-ends in medical electronics. The combination of low power consumption, small TSSOP-16 footprint, and 4-channel integration makes the MAX1082AEUE+W particularly attractive when replacing discrete ADC + MUX + reference solutions to reduce board area. Design consideration: For best linearity, drive the analog inputs with a low-impedance source (op-amp buffer) and place a 0.1 µF ceramic bypass capacitor within 5 mm of the AVDD pin. Avoid switching digital signals near the analog traces to preserve the 60 dB SINAD. This page synthesizes real-time distributor pricing, drop-in same-family alternatives, and application-specific design notes beyond what is in the manufacturer datasheet alone.

Cotización Contacto

MAX1084BCSA

MAX1084BCSA - 400ksps Serial 10-Bit ADC | Maxim Integrated

The Analog Devices (formerly Maxim Integrated) MAX1084BCSA is a 400ksps/300ksps, single-supply, low-power, serial 10-bit analog-to-digital converter (ADC) with an internal reference, housed in an 8-pin SOIC (CSA) package. It combines a wide-bandwidth track-and-hold, a high-speed serial interface, and an internal 2.5V reference, delivering 10-bit resolution at up to 400ksps (MAX1084) or 300ksps (MAX1085) while operating from a single 4.5V to 5.5V analog supply. According to the Maxim datasheet, the device integrates a successive-approximation register (SAR) ADC core optimized for low power dissipation. An analog-to-digital converter (ADC) is a data-acquisition component that converts a continuous analog input voltage into a discrete digital code. SAR (Successive Approximation Register) ADCs use a binary-search algorithm against an internal DAC to resolve each conversion in N clock cycles, where N is the bit resolution (10 cycles for a 10-bit ADC). They sit within the data-converter hierarchy: ADC -> data converter -> data acquisition IC -> signal chain -> mixed-signal SoC. Compared with delta-sigma ADCs, SAR converters offer higher sample rates and lower latency, making them ideal for multiplexed multi-channel systems. Key features include 4.5V to 5.5V single-supply operation, an internal 2.5V reference (MAX1084A/MAX1085A) or external reference option, a high-speed SPI/QSPI/MICROWIRE-compatible serial interface, and low power consumption (typical 1.9mA at 400ksps, dropping to under 10µA in shutdown). The serial-interface daisy-chain capability allows multiple ADCs to share one processor port, reducing board area in multi-channel designs. The MAX1084BCSA uses a capacitive-charge redistribution SAR architecture with an input track-and-hold capable of handling full-scale inputs up to VREF. Its serial interface outputs MSB-first data with an external SCLK, simplifying connection to microcontrollers and DSPs. The 'BC' speed-grade suffix denotes the 400ksps MAX1084 variant (the 300ksps MAX1085 uses 'AC'). Typical applications include remote-sensor signal acquisition, portable data loggers, battery-powered instrumentation, multi-channel multiplexed data-acquisition systems, and pen-digitizer or touch-screen interfaces. Designers favor this part when serial output, small footprint (SO-8), and low quiescent current matter most. A practical design consideration: because the part is specified for 4.5V-5.5V analog supply, it is not directly 3.3V-rail compatible without a level shifter or local LDO. Decouple AVDD with a 10µF tantalum in parallel with a 0.1µF ceramic placed within 5mm of the supply pin. This page synthesizes real distributor pricing, pin-compatible drop-in alternatives from the Maxim MAX108x family, and practical PCB design notes not consolidated on any single distributor or manufacturer page.

Cotización Contacto

MAX1084BCSA+T

MAX1084BCSA+T - 10-Bit 400ksps Serial ADC | Maxim Integrated

The Maxim Integrated MAX1084BCSA+T is a 10-bit, 400ksps (kilosamples per second) single-supply, low-power, successive-approximation analog-to-digital converter (ADC) with an internal reference, offered in an 8-pin SO (SOIC) package with tape-and-reel packaging (the “+T” suffix). An ADC (analog-to-digital converter) is a data-conversion integrated circuit that samples continuous analog voltages and outputs discrete binary codes suitable for microcontrollers, DSPs, or FPGAs. Within the converter family hierarchy, the MAX1084 belongs to the successive-approximation register (SAR) ADC category, which sits under precision ADCs, which in turn sit under data converters and signal-chain ICs. SAR ADCs are valued for deterministic latency, low power, and high accuracy at moderate sample rates, making them the workhorse choice for multiplexed sensor reading and industrial control. Key electrical specifications include a 10-bit resolution, a 400 ksps maximum sample rate (when using an external clock), a single +5V analog supply, low power consumption suitable for battery-powered designs, an internal reference (eliminating an external reference IC), an SPI/QSPI/MICROWIRE-compatible serial interface, and an integrated high-bandwidth track/hold. According to the Maxim datasheet family (MAX1084/MAX1085), these converters combine ease of use with small footprint for space-constrained boards. Typical applications where the MAX1084BCSA+T fits well include remote-sensor and data-acquisition systems, portable and battery-powered instruments, process control loops, multiplexed analog input modules, and instrumentation where low quiescent current and small 8-pin SO packaging are required. The internal reference simplifies BOM (bill of materials) and PCB area, while the SPI-compatible serial interface minimizes microcontroller pin count. When designing with this ADC, ensure that the analog input does not violate the absolute input range relative to the analog supply rail, and place the recommended 0.1µF supply bypass capacitor directly at the AVDD pin. The serial interface allows direct connection to microcontrollers without external glue logic. This page synthesizes distributor pricing, parametric alternatives, and practical design notes not found on a single manufacturer datasheet page — a consolidated reference for engineers evaluating the MAX1084BCSA+T for new designs or as a drop-in replacement for MAX1242/MAX1243-series devices, which the datasheet notes are pin-compatible predecessors with lower sample rates.

Cotización Contacto

MAX1084BESA

MAX1084BESA - 10-Bit 400ksps SAR ADC | Maxim Integrated

The Maxim Integrated MAX1084BESA is a 10-bit successive-approximation analog-to-digital converter (SAR ADC) that samples at up to 400 ksps in an 8-pin SOIC surface-mount package. The part combines a high-bandwidth track-and-hold, a serial interface, an internal +2.5V reference, and low power consumption in a single-supply 5V design. A SAR ADC is a type of analog-to-digital converter that uses a binary search algorithm against an internal DAC to digitize an analog input one bit at a time per clock cycle. The architecture is favored for medium-resolution, medium-speed precision applications because it delivers deterministic latency and excellent DC accuracy without the complexity of pipeline or delta-sigma stages. SAR converters sit within the broader data-converter hierarchy above flash and integrating ADCs but below most delta-sigma and pipelined architectures in conversion speed. Key features of the MAX1084BESA include 400 ksps sampling rate, an internal +2.5V reference (eliminating an external reference component), single 5V analog supply operation, an SPI-/QSPI-/MICROWIRE-compatible serial interface, and a hardware shutdown pin for power saving. Low power consumption and an 8-pin small-outline package make the device well-suited to space- and energy-constrained designs. The MAX1084BESA is pin-compatible and a higher-speed functional upgrade to the legacy MAX1242/MAX1243 family, allowing designers to migrate existing boards to faster sampling with no PCB rework. Compared with the slower MAX1085 (300 ksps), it doubles throughput for the same package and pinout, simplifying BOM consolidation across speed variants. Typical applications include remote-sensor signal acquisition, industrial process control, portable instrumentation, weigh scales, and patient-monitoring front ends. The internal reference and small SO footprint reduce external parts count for handheld and battery-powered systems. When designing in this part, place the 0.1 µF bypass capacitor as close to the supply pin as the layout allows and keep analog/digital grounds joined at a single star point. Use the SHDN pin in battery-powered designs to idle the converter between conversions and minimize quiescent draw. The serial interface allows galvanic isolation through low-cost digital isolators where patient-safety or industrial isolation is required.

Cotización Contacto

MAX1085ACSA+

MAX1085ACSA+ - 10-Bit 300ksps Serial ADC | Maxim Integrated

The Maxim Integrated (Analog Devices) MAX1085ACSA+ is a 10-bit, 300 ksps, single-supply, low-power, serial-interface successive-approximation analog-to-digital converter (ADC) housed in an 8-pin SOIC (NSOIC/SOP) package. It combines a high-bandwidth track/hold, a serial SPI/QSPI/MICROWIRE-compatible interface, an internal +2.5V reference, and a low-power architecture, drawing only 2.5 mA typical supply current at 300 ksps while automatically powering down to under 1 µA between conversions. An SAR ADC is a successive-approximation register analog-to-digital converter — a type of data converter that uses a binary-search algorithm against a precision DAC to digitize an analog input one bit per clock cycle. SAR ADCs sit in the broader hierarchy of: ADC -> data converter -> mixed-signal IC -> semiconductor. Compared with delta-sigma ADCs, SAR parts offer deterministic latency and single-shot conversions, making them preferred for multiplexed data-acquisition front-ends and control loops. Compared with flash ADCs of the same bit count, SAR parts consume far less power and silicon area. Key features include 300 ksps maximum sampling rate (the 5 MHz clocked MAX1084 variant shares the same datasheet and pin-out at 400 ksps), 10-bit resolution, single-ended analog input, internal 2.5V reference (±1.5% initial accuracy), SPI/QSPI/MICROWIRE-compatible serial interface, 2.5 mA supply current at full speed, and automatic power-down between conversions. The 8-pin SOIC package provides a small footprint suitable for space-constrained industrial and instrumentation designs. The MAX1085 uses a charge-redistribution DAC array with an inherent sample-and-hold front-end, allowing the analog input to settle during acquisition without an external buffer. The internal reference eliminates the need for an external reference IC, reducing BOM cost and PCB area, while still offering ±1.5% initial accuracy suitable for general-purpose 10-bit measurement. Typical applications include portable data logging, pen-digitizer digitizing tablets, portable battery-powered instruments, isolated industrial 4-20 mA sensor digitizers, and general-purpose single-channel data acquisition. The MAX1085A grade offers specified AC electrical characteristics, while the MAX1085B grade offers slightly tighter linearity; the suffix "C" denotes the commercial 0 °C to +70 °C temperature range and "SA" denotes the 8-pin SOIC package. When designing with the MAX1085ACSA+, place a 0.1 µF bypass capacitor within 5 mm of the AVDD pin and keep the analog input traces short and guarded. The serial interface uses SCLK, DIN, DOUT, and active-low CS — tie DIN high when reading conversions only, or hardwire it for hardware-mode operation.

Cotización Contacto

Subcategorías

Productos (39.000+)

MAX1068AEEG+T - 14-Bit 200ksps Multi-Channel SAR ADC | Maxim Integrated

MAX1068CCEG+ - 14-Bit 200ksps 4Ch SAR ADC | Maxim Integrated

MAX1069AEUD+ - 14-Bit 58.6ksps 2-Wire Serial ADC | Maxim

MAX1069AEUD+T - 14-Bit 58.6ksps I2C SAR ADC | Analog Devices

MAX1070CTC+ - 1.5Msps 10-Bit Differential ADC | Analog Devices

MAX1070CTC+T - 1.5Msps 10-Bit SAR ADC | Analog Devices/Maxim

MAX1070ETC+ - 1.5Msps 10-Bit Differential ADC | Maxim Integrated

MAX1070ETC+T - 1.5Msps 10-Bit True-Diff ADC | Maxim Integrated

MAX1071CTC+T - 1.5Msps 10-Bit Differential SAR ADC | Analog Devices

MAX1076CTC+T - 10-Bit 1.8Msps SAR ADC, True-Diff, 12-TQFN | Maxim

MAX1078CTC+ - 10-Bit 1.8MSPS Differential ADC | Maxim Integrated

MAX1078CTC+T - 1.8Msps 10-Bit Differential ADC | Maxim Integrated

MAX1079CTC+ - 10-Bit 1.5Msps Differential ADC | Maxim Integrated

MAX1079CTC+T - 1.5Msps 10-Bit Diff ADC, Internal Ref | Maxim

MAX107ECS+ - Dual 6-Bit 400MSPS ADC | Maxim Integrated

MAX1080BCUP+ - 400ksps 10-Bit 8-Ch Serial ADC | Maxim Integrated

MAX1081BCUP - 10-Bit 300/400ksps 8-CH Serial ADC | Maxim Integrated

MAX1082ACUE+T - 10-Bit 400ksps 4-Ch Serial ADC | Maxim

MAX1082AEUE+TW - 10-Bit 400ksps 4-Ch SAR ADC | Maxim Integrated

MAX1082AEUE+W - 10-Bit, 4-Ch, 300ksps SAR ADC | Maxim Integrated

MAX1084BCSA - 400ksps Serial 10-Bit ADC | Maxim Integrated

MAX1084BCSA+T - 10-Bit 400ksps Serial ADC | Maxim Integrated

MAX1084BESA - 10-Bit 400ksps SAR ADC | Maxim Integrated

MAX1085ACSA+ - 10-Bit 300ksps Serial ADC | Maxim Integrated