Circuitos integrados

PIC12F1572-I/MF

PIC12F1572-I/MF - 8-bit 32MHz MCU, 3.5KB Flash, 8-DFN | Microchip

The Microchip Technology PIC12F1572-I/MF is an 8-bit PIC microcontroller featuring a 32MHz CPU, 3.5KB (2K x 14) Flash program memory and 256 bytes of RAM, housed in a compact 8-pin DFN (3x3 mm) package. The device operates from 2.5V to 5.5V across the industrial -40C to +85C temperature range and integrates three independent 16-bit PWMs, a 10-bit ADC, a 5-bit DAC, two comparators and the Configurable Logic Cell (CLC) peripheral family. What is an 8-bit PIC microcontroller? An 8-bit PIC microcontroller is a RISC-based CMOS embedded controller that uses a Harvard architecture to execute instructions in a single cycle. PIC microcontrollers belong to the broader category of microcontrollers -> embedded controllers -> semiconductor ICs, and are widely used in cost- and power-sensitive designs where deterministic timing and small footprints matter. The PIC12F1572 specifically targets applications needing high-resolution PWM generation in an 8-pin footprint. Key features of the PIC12F1572 include three independent 16-bit PWMs with dedicated timers for high-resolution outputs (LED dimming, motor control), a 10-bit ADC with up to 6 channels, a 5-bit DAC for analog bias generation, two comparators, and CLC (Configurable Logic Cell) that allows on-chip combinational/sequential logic without external glue chips. The 8-pin DFN (3x3 mm) package makes it suitable for space-constrained PCB designs. Technically, the PIC12F1572 is built on Microchip's enhanced mid-range 8-bit core, delivering 32MHz operation (200ns instruction cycle) with 49 instructions and 16 hardware registers. The internal oscillator can be factory calibrated to +/-1% across 2.5V-5.5V and 0C-70C, simplifying designs by removing external crystals. Core Independent Peripherals (CIPs - PWMs, comparators, CLC) operate without CPU intervention, lowering software complexity and active power. Typical applications include LED lighting and color-mixing controllers (using the three 16-bit PWMs), stepper motor and DC motor drivers, digital power supplies (SMPS), battery chargers, fan speed controllers, and small appliance control boards. The combination of small footprint and high-resolution PWM uniquely suits solid-state lighting designs. When designing with this device, note the I (Industrial) temperature grade of -40C to +85C and confirm the 8-DFN package has adequate PCB thermal land and proper reflow profile per Microchip Application Note AN233. Use the MPLAB X IDE with XC8 compiler for code development; the PICkit or Snap programmer supports in-circuit debugging.

Cotización Contacto

PIC12F1572-I/MS

PIC12F1572-I/MS - 8-bit MCU, 32MHz, 3.5KB Flash, 16-bit PWM | Microchip

The Microchip Technology PIC12F1572-I/MS is an 8-bit PIC microcontroller featuring three independent 16-bit PWMs, 3.5KB (2K x 14) of Flash program memory, and 256 bytes of RAM, housed in an 8-pin MSOP package. Operating from 1.8V to 5.5V at speeds up to 32MHz (125 ns instruction cycle), the part integrates core independent peripherals that include a 10-bit ADC, 5-bit DAC, two comparators, three 16-bit PWMs, a Complementary Waveform Generator (CWG), and a Configurable Logic Cell (CLC), enabling complex signal generation without external analog or timing ICs. An 8-bit microcontroller (MCU) is a single-chip computer that executes instructions from on-chip program memory through an 8-bit data path. The PIC12F1572 belongs to the PIC12F family (8-pin mid-range core), within the broader PIC® mid-range architecture, which itself falls under the 8-bit microcontroller category. As a CMOS flash-based MCU it sits in the semiconductor product hierarchy: microcontroller -> 8-bit MCU -> embedded controller -> integrated circuit. Key features include three 16-bit PWMs with independent timers, hardware CWG for complementary drive (useful for H-bridge and half-bridge switching), on-chip 5-bit DAC, an EUSART module for asynchronous serial communication, and nanoWatt XLP low-power technology with < 50 nA typical sleep current. The 10-bit ADC provides up to 4 input channels through an external MUX. The PIC12F1572 employs a Harvard RISC architecture with 49 instructions and a 14-bit instruction word; the Flash program memory supports self-programming via ICSP, allowing in-field firmware updates. The CWG and 16-bit PWMs are designed for high-resolution applications such as LED dimming, power-converter control, and stepper-motor drive waveforms where precise timing is critical. Typical applications include multi-channel LED lighting control, brushed DC motor and stepper motor drive, switch-mode power supply digital control loops, RGB color mixing, fan speed control, and consumer remote/HID devices. Compact 8-pin designs benefit when board area is constrained but PWM resolution and analog integration are still required. When designing with this MCU, ensure decoupling capacitors (100 nF and 10 uF) are placed within 4 mm of the VDD pin and that the ICSP programming pins (ICSPCLK/ICSPDAT) are reserved or routed to test pads. The internal 16 MHz HFINTOSC accuracy is approximately +/-2 percent over voltage and temperature, so applications requiring tight UART baud rates should use a crystal or the PLL multiplier. This page synthesizes distributor stock, parametric drop-in alternatives, and practical design notes drawn from the Microchip PIC12(L)F1571/2 datasheet to support sourcing, replacement and PCB-level decisions that the manufacturer datasheet alone does not cover.

Cotización Contacto

PIC12F1572-I/P

PIC12F1572-I/P - 8-bit 32MHz 3.5KB Flash MCU 8-PDIP | Microchip

The Microchip Technology PIC12F1572-I/P is an 8-bit PIC microcontroller with an enhanced mid-range core, 32 MHz operation, 3.5 KB Flash program memory, 256 bytes RAM, and 128 bytes EEPROM, housed in an 8-pin PDIP through-hole package. It integrates three independent 16-bit PWMs, a 10-bit ADC with up to 4 channels, one 5-bit DAC, two comparators, a complementary waveform generator (CWG), and an 8-bit timer. The part is specified across 2.5V, 3.3V, and 5V rails at industrial temperature range -40C to +85C. A PIC12F-series microcontroller is an 8-bit reduced instruction set (RISC) device built around a Harvard architecture, used as a low-cost system-on-chip for embedded control. PIC12F devices sit at the low end of Microchip's PIC portfolio (PIC10F -> PIC12F -> PIC16F -> PIC18F) and target small pin-count applications that still need on-chip analog and PWM peripherals. They are widely used in consumer, industrial, and IoT products where 8 pins, a handful of analog inputs, and precise timing are sufficient. Key features that distinguish the PIC12F1572 include three 16-bit PWM channels with independent time bases, enabling high-resolution control of LED drivers, stepper motors, and switch-mode power supplies. The device also includes a complementary waveform generator for half-bridge and full-bridge drive without external logic, an on-chip temperature indicator, and eXtreme Low Power (XLP) sleep modes. According to the Microchip datasheet, the enhanced mid-range core delivers up to 49 instructions per cycle in select instructions versus 24 on baseline PIC cores, improving determinism for time-critical loops. Typical applications include high-resolution LED lighting, fan and pump speed control, battery chargers, small digital power conversion, sensor conditioning, and low-cost general-purpose control boards. The combination of three 16-bit PWMs, dual comparators, and a 10-bit ADC allows the PIC12F1572 to perform closed-loop control in a single chip. When designing with the PIC12F1572-I/P, choose the PDIP package for breadboarding, hand-soldered prototypes, and educational kits. For production, consider its surface-mount siblings (PIC12F1572-I/SN SOIC-8, PIC12F1572-I/MS MSOP-8) which share the same pinout and die. Always provide a 0.1uF decoupling capacitor on VDD and follow the datasheet's In-Circuit Serial Programming (ICSP) layout recommendations. This page synthesizes distributor pricing, drop-in alternative listings, and design notes not found in the manufacturer datasheet, giving engineers a faster path to part selection and PCB reuse.

Cotización Contacto

PIC12F1572-I/RF

PIC12F1572-I/RF - 8-bit MCU, 32MHz, 3.5KB Flash, 16-bit PWM | Microchip

The Microchip PIC12F1572-I/RF is an 8-bit PIC12 family RISC microcontroller running at up to 32MHz with 3.5KB (2K x 14 words) of Flash program memory and 256 bytes of RAM, housed in an 8-pin UDFN (3x3 mm) package. It integrates three independent 16-bit PWM channels, six timers, a 10-bit ADC, a 5-bit DAC, two comparators, a complementary waveform generator (CWG), and the standard PIC12 core independent peripherals including BOR, POR and WDT. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, working RAM, and peripheral subsystems into one IC. MCUs sit one level below microprocessors in the embedded hierarchy and are categorized by bus width (8-bit, 16-bit, 32-bit), Flash size, and integrated peripheral set. PIC12F-series parts target low-pin-count (8-pin) applications where PCB area, BOM count, and power budget are critical, making them a sweet spot for compact analog-and-control designs. Key differentiating features of the PIC12F1572-I/RF include the three 16-bit PWMs with independent time bases (uncommon in an 8-pin device), 4-channel 10-bit ADC with hardware capacitive voltage divider (CVD) support, complementary waveform generator for half-bridge / full-bridge / push-pull drive, and on-board 5-bit DAC usable as a programmable reference. The instruction set is enhanced mid-range with 200 ns instruction execution at 20 MHz oscillator. Typical applications include high-resolution LED dimming and color mixing, stepper motor microstepping control, switched-mode power supply control loops, sensor signal conditioning, low-cost fan/lighting control, and battery-powered portable instrumentation. The 8-pin UDFN footprint also makes it a strong fit for space-constrained wearables and IoT edge nodes. When designing with this device, note the UDFN package has an exposed thermal pad that must be soldered to the PCB ground pour for mechanical reliability. Decouple VDD with a 100 nF ceramic capacitor placed within 3 mm of the pin, and reserve an unused GPIO for in-system debug via the ICSP/ICD pins to retain code-development flexibility. This page synthesizes distributor pricing, drop-in PIC12 alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto

PIC12F1572-I/SN

PIC12F1572-I/SN - 8-Bit MCU, 32MHz, 3.5KB Flash | Microchip

The Microchip Technology PIC12F1572-I/SN is an 8-bit enhanced mid-range PIC microcontroller with 3.5KB (2K x 14) of Flash program memory, 256 bytes of RAM, and 32MHz internal oscillator speed, housed in an 8-pin SOIC (SN, 3.9mm body) package. It integrates three independent 16-bit PWMs, a 10-bit ADC with four channels, a 5-bit DAC, two comparators, a Complementary Waveform Generator (CWG), and an EUSART — all on a single 8-pin footprint. The industrial-grade -I temperature range supports -40C to +85C operation. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and peripherals such as ADCs, timers, and communication interfaces. Within the broader embedded hierarchy, an 8-bit MCU belongs to the microcontroller category, which sits under microcontrollers and processors in the semiconductor taxonomy. The PIC12 family represents Microchip's compact, low-pin-count MCU line designed for cost-sensitive and space-constrained designs where minimal external components and small package size matter more than raw compute throughput. Key features that differentiate the PIC12F1572 include its three 16-bit PWMs with independent timers — uncommon in 8-pin MCUs — enabling precision control applications such as LED lighting fade/dimming, motor speed control, and switched-mode power supplies. The integrated CWG complements the PWMs by providing complementary outputs with programmable dead-band delay, ideal for driving half-bridges or full-bridges in motor drive and lighting applications. Combined with the 10-bit ADC and 5-bit DAC, the part can implement closed-loop analog control without external signal conditioning ICs. Architecturally, the PIC12F1572 uses Microchip's enhanced mid-range 8-bit RISC core, which executes most instructions in a single cycle (200ns at 20MHz, 125ns at 32MHz). The Harvard architecture separates program and data buses, and the C-compiler-optimized instruction set enables efficient code generation. The on-chip 32MHz high-precision internal oscillator eliminates the need for an external crystal in most designs, further reducing BOM cost and PCB area. Typical applications include LED lighting dimming and color-mixing drivers, small DC motor and stepper control, switched-mode power supply control loops, general-purpose timer/PWM replacement of discrete logic, and battery-powered IoT edge sensors requiring analog sensing plus PWM actuation. The 8-pin SOIC package suits hand-solderable prototyping and standard SMT assembly lines. When designing with this part, ensure the ICSP programming pins (ICSPCLK/ICSPDAT) are accessible on the PCB for in-circuit programming and debugging, and add a 0.1uF decoupling capacitor close to VDD. The 16-bit PWM resolution is preserved only when the system clock is fast enough — at low FOSC values, the effective PWM resolution decreases because each PWM step requires a clock cycle. This page synthesizes distributor pricing, drop-in alternatives drawn from the same Microchip PIC12F157x family, and practical design notes not consolidated in the manufacturer datasheet alone.

Cotización Contacto

PIC12F1572T-I/MF

PIC12F1572T-I/MF - 8-bit MCU 32MHz 3.5KB Flash 8-DFN | Microchip

The Microchip Technology PIC12F1572T-I/MF is an 8-bit PIC microcontroller with a 32 MHz internal oscillator, 3.5 KB (2K x 14) of Flash program memory, 256 bytes of RAM, and a 5-bit DAC, packaged in an 8-pin DFN (3x3 mm) with exposed thermal pad for tape-and-reel shipping. A microcontroller (MCU) is a single-chip computer containing a CPU core, non-volatile program memory (typically Flash), working RAM, and a set of on-chip peripherals such as timers, ADC, comparators, PWM modules, and communication interfaces. The PIC12F1572 belongs to Microchip's PIC12 mid-range core family, which sits within the broader hierarchy 8-bit PIC -> mid-range core -> RISC MCU -> microcontroller -> semiconductor. The device is built on a CMOS process and integrates three independent 16-bit PWM channels with complementary waveform generation, which is uncommon in an 8-pin package. Key features include three 16-bit PWMs with independent timers, a 5-bit DAC, comparators, ADC, and Core Independent Peripherals (CIPs) that offload timing-critical logic from the CPU. The wide 2.5 V to 5.5 V supply range supports both 3.3 V and 5 V rails. The 8-DFN package gives a compact 3x3 mm footprint suitable for high-density designs and offers better thermal performance than equivalent leaded 8-pin parts. Architecturally, the device combines the standard PIC mid-range 14-bit instruction set with configurable logic cells and PWM steering to drive half-bridges and full-bridges for LED lighting, motor control, and switched-mode power supply applications. The high-resolution 16-bit PWMs are particularly useful where analog filter sizing or audible PWM noise is a concern. Typical applications include LED lighting color mixing and dimming, stepper motor and brushed DC motor control, digital power conversion, IoT edge nodes, and consumer electronics. The high PWM resolution also suits haptic drivers and Class-D audio amplifiers where PWM noise floor must be minimized. When designing with this MCU, ensure the 8-DFN exposed pad is soldered to a sufficient copper pour for thermal dissipation and ground return. Program and debug via the in-circuit serial programming (ICSP) interface with the PICkit or MPLAB Snap programmer. This page synthesizes distributor pricing, pin-compatible drop-in alternatives, and practical design notes that complement the manufacturer datasheet and gives engineers a single decision-ready reference.

Cotización Contacto

PIC12F1572T-I/RF

PIC12F1572T-I/RF - 8-Bit MCU, 32MHz, 3.5KB Flash, 8-UDFN | Microchip

The Microchip PIC12F1572T-I/RF is an 8-bit PIC microcontroller featuring a 32 MHz internal oscillator, 3.5 KB (2K x 14) of Flash program memory, 256 bytes of RAM, and an integrated 10-bit ADC with up to 4 channels, all housed in an 8-pin UDFN (3x3 mm) exposed-pad package with tape-and-reel packaging. It belongs to the PIC12(L)F157x family, which uniquely integrates three 16-bit PWM modules with independent timers alongside 5-bit and 10-bit DACs, making it purpose-built for cost-sensitive mixed-signal designs. An 8-bit PIC microcontroller (MCU) is a compact, low-power computing core built around Microchip's enhanced mid-range RISC architecture. The 8-bit MCU sits within the broader taxonomy of microcontrollers -> microcomputers -> embedded processors -> semiconductors, and is typically used for dedicated control tasks where low cost, deterministic timing, and minimal external component count are critical. The PIC12F1572 family targets general-purpose applications that previously required larger 14- or 20-pin MCUs but can now be implemented in an 8-pin footprint. Key differentiating specifications include three independent 16-bit PWMs (vs. the typical 8- or 10-bit PWM found in competing 8-pin MCUs), a 5-bit DAC and a 10-bit DAC on dedicated output pins, a complementary waveform generator (CWG), four 10-bit ADC channels, and two comparators. Operating voltage spans 2.3V to 5.5V across the -40C to +85C industrial range, with the 'F' (Flash) variant supporting in-circuit serial programming (ICSP) for field-upgradeable firmware. Architecturally, the device uses a Harvard RISC core with a single-cycle 49-instruction set, 14-bit instruction word, and hardware stack. The three 16-bit PWM channels share independent Timer2/4/6 sources and support edge- and center-aligned modes with dead-band control, enabling direct generation of high-resolution lighting, motor-control, and switch-mode power-supply waveforms without CPU intervention. Typical applications include LED lighting drivers (RGB, RGBA, and white-tuning), stepper motor control, isolated and non-isolated switch-mode power supplies, fan controls, battery chargers, and compact IoT sensor nodes. The combination of high-resolution PWM and integrated analog peripherals eliminates the need for external driver ICs in many cost-sensitive designs. When designing with the PIC12F1572T-I/RF, ensure the exposed pad (EP) on the UDFN package is soldered to a sufficient copper thermal/ground pour on the PCB - this is the device's primary ground connection. Programming requires a 5V-tolerant ICSP connection on ICSPCLK/ICSPDAT pins, and unused GPIO should be configured as outputs low to minimize quiescent current draw. This page synthesizes verified distributor pricing, drop-in alternatives, and application-specific design guidance not found in the standalone manufacturer datasheet, giving procurement and engineering teams a single source for parametric, supply-chain, and design data on PIC12F1572T-I/RF.

Cotización Contacto

PIC12F1612-E/MF

PIC12F1612-E/MF - 8-bit MCU, 3.5KB Flash, 32MHz, 8-DFN | Microchip

The Microchip Technology PIC12F1612-E/MF is an 8-bit PIC microcontroller from the PIC12F family featuring a RISC architecture, 3.5KB of program Flash memory, and an 8-pin VDFN (DFN) exposed-pad package. The device runs at up to 32MHz clock speed with a wide operating voltage range of 2.5V to 5.5V, and integrates a 10-bit ADC, capture/compare/PWM (CCP), 24-bit Signal Measurement Timer (SMT), and zero-cross detect peripherals for embedded motor and general-purpose control applications. An 8-bit microcontroller (MCU) is a small, low-power computing device built around an 8-bit data path and integrated Flash program memory, peripherals, and a CPU core on a single die. The PIC12F1612 belongs to the PIC12F family, which sits within the broader PIC microcontroller hierarchy: 8-bit MCU -> PIC microcontroller -> Microchip MCU portfolio -> embedded computing devices. Low-pin-count PIC12F parts are designed for cost- and space-sensitive designs that still need hardware timers, ADC, and PWM. Key differentiating features of the PIC12F1612 include its on-chip 24-bit Signal Measurement Timer (rare in 8-pin MCUs), zero-cross detection logic for AC-line dimming, complementary waveform generator (CWG), numerically controlled oscillator (NCO), and configurable logic cell (CLC). These peripherals enable motor control, lighting, and signal conditioning without external components. The internal oscillator reduces BOM cost, and the wide 2.5V to 5.5V supply range supports both 3.3V and 5V system rails. The PIC12F1612 uses a Harvard-architecture RISC core with a single-cycle instruction set, enabling deterministic instruction timing. Its analog front-end pairs a 10-bit ADC with comparators and a fixed-voltage reference, while digital peripherals (CCP, CWG, NCO, CLC) provide flexible waveform synthesis. Code protection, low-voltage programming, and In-Circuit Serial Programming (ICSP) support simplify prototyping and field updates. Typical applications include low-end motor control (small DC and brushed motors), AC-line dimming with zero-cross detection, LED lighting and color mixing, sensor signal conditioning, and general-purpose embedded control in white goods, fans, and small appliances. The wide temperature range (-40C to +125C) and small footprint also suit automotive body and industrial sensor nodes. When designing with this part, route the exposed pad (EP) to a solid ground plane for thermal dissipation and electrical reference, and follow Microchip's DFN PCB layout guidelines for the 8-VDFN package. Programming via ICSP requires the standard PGD/PGC pin pair. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that complement the manufacturer datasheet.

Cotización Contacto

PIC12F1612-E/SN

PIC12F1612-E/SN - 8-bit 32MHz MCU, 3.5KB Flash | Microchip

The Microchip Technology PIC12F1612-E/SN is an 8-bit PIC RISC microcontroller with 32MHz internal oscillator, 3.5KB (2K x 14) Flash program memory, 256 bytes RAM, and 256 bytes data EEPROM in an 8-pin SOIC package. It operates from 2.5V to 5.5V and integrates 6 I/O pins, 6 timers, a 1-channel 8-bit DAC, and a 4-channel 10-bit ADC. The -E suffix denotes the extended industrial temperature grade of -40C to +125C, while /SN indicates the 8-pin SOIC (150-mil narrow-body) package. What is an 8-bit microcontroller? An 8-bit microcontroller is a small, self-contained computing core on a single IC that fetches, decodes, and executes 8-bit-wide instructions from on-chip Flash memory. PIC12-series parts belong to Microchip's baseline-and-mid-range 8-bit family, positioned hierarchically below PIC16 (mid-range) and PIC18 (enhanced) parts in the broader PIC taxonomy of microcontrollers -> embedded controllers -> semiconductor ICs. The PIC12F1612's distinctive value is on-chip motor-control peripherals such as 24-bit Signal Measurement Timer (SMT), Zero-Cross Detect (ZCD), and Complementary Waveform Generator (CWG), which are uncommon in this pin-count class. Key features include 3.5KB self-programmable Flash with 10,000 erase/write cycles, 256 bytes RAM, 256 bytes EEPROM, a 10-bit ADC with 4 channels and up to 100 ksps conversion rate, an 8-bit DAC, multiple timer modules including the 24-bit SMT for precise time measurement, and Capture/Compare/PWM (CCP) peripherals. The integrated Zero-Cross Detect simplifies AC-line sensing without external optocouplers, and the CWG generates complementary PWM waveforms for driving MOSFET half-bridges in low-power motor control. The PIC12F1612 uses Microchip's enhanced mid-range 8-bit CPU core with a 14-bit instruction word, single-cycle execution except for branches, and a hardware stack for fast context switching. The internal 32MHz oscillator is factory calibrated to +/-1% and supports a wide operating voltage range for both battery and 5V rail applications, while the integrated 4-channel 10-bit ADC enables direct sensor interfacing without external signal conditioning. Typical applications include small DC motor control in fans and pumps, AC-line dimming and zero-cross switching, LED lighting control with PWM and CWG outputs, battery-powered IoT sensor nodes, and general-purpose embedded control in appliances and consumer products. The combination of SMT, ZCD, and CWG peripherals in an 8-pin footprint is rare in the marketplace and is the primary reason engineers select this part over generic PIC12F alternatives. When designing with this device, take care to bypass VDD with a 100nF ceramic capacitor placed within 5mm of the pin, and ensure MCLR is pulled high through a 10k resistor for normal operation. The internal oscillator eliminates external crystals for most uses but may not suit USB or precise-timing applications, where a PIC16F or PIC18F part with an external oscillator is preferred. This page synthesizes distributor pricing, drop-in compatible alternatives from Microchip's PIC12 family, and practical design notes not aggregated on a single manufacturer or distributor page.

Cotización Contacto

PIC12F1612-I/MF

PIC12F1612-I/MF - 8-bit MCU, 32MHz, 3.5KB Flash, 8-DFN | Microchip

The Microchip Technology PIC12F1612-I/MF is an 8-bit PIC microcontroller running up to 32 MHz, equipped with 3.5 KB (2K x 14) of Flash program memory, 256 bytes of SRAM, and 256 bytes of EEPROM, housed in an 8-pin DFN (3x3 mm) package. The device integrates core-independent peripherals such as a 10-bit ADC with Computation (ADCC), a 24-bit Signal Measurement Timer (SMT), Complementary Waveform Generator (CWG), Numerically Controlled Oscillator (NCO), and Configurable Logic Cells (CLC), enabling complex control tasks without CPU intervention. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (typically Flash), working RAM, and a rich set of on-chip peripherals such as timers, ADC, communication interfaces, and I/O pins. The PIC12F1612 belongs to the PIC® 12F family of 8-bit microcontrollers, positioned in Microchip's mid-range PIC portfolio as an 8-pin compact MCU for embedded control of small motors, LED lighting, sensor signal conditioning, and general-purpose applications. Its position in the broader taxonomy is: PIC12F1612 -> PIC12F family -> 8-bit PIC MCU -> Microcontroller -> Semiconductor. Key features of the PIC12F1612 include six I/O pins sharing six peripheral functions, two 8-bit timers plus one 16-bit timer, a 10-bit ADC with oversampling and averaging, hardware limit timer, and zero-cross detection. The device operates from 2.5 V to 5.5 V and supports industrial temperature range of -40 °C to +85 °C. An internal 32 MHz oscillator with ±1 % accuracy eliminates the need for an external crystal in most designs, reducing BOM cost and PCB area. The architecture is built on Microchip's enhanced mid-range 8-bit core using a 14-bit instruction set, providing single-cycle operation for most instructions at 32 MHz (125 ns instruction cycle). On-chip peripherals like CWG and NCO offload waveform synthesis and frequency generation from the CPU, enabling deterministic hardware-driven control loops useful for motor drive, dimming, and pulse generation. The wide peripheral set allows a single MCU to replace multiple analog/discrete components. Typical applications include small DC motor and fan control, LED lighting dimming and color mixing, capacitive-touch user interfaces, sensor signal conditioning with hardware averaging, and compact consumer appliances. The 8-DFN 3x3 mm footprint makes it well-suited for space-constrained designs. When designing with the PIC12F1612, ensure proper decoupling (100 nF + 1 µF) close to VDD, and verify that the total I/O sink/source current budget (per-pin and per-port) is respected for LED or relay drive scenarios. Always check the latest PIC12F1612 errata document for known device issues during firmware development. This page synthesizes distributor pricing, drop-in alternative MCUs, and practical design notes not found in the manufacturer datasheet alone, helping engineers evaluate the PIC12F1612-I/MF against its PIC12F1571, PIC12F1572, and PIC12F1501 siblings, as well as automotive-grade -Q variants.

Cotización Contacto

PIC12F1612-I/P

PIC12F1612-I/P - 8-Bit MCU, 3.5KB Flash, 32MHz | Microchip

The Microchip Technology PIC12F1612-I/P is an 8-bit PIC microcontroller with 3.5KB Flash, 256 bytes RAM, and a 32MHz internal oscillator, housed in an 8-pin PDIP through-hole package. It operates from 2.5V to 5.5V and integrates peripherals including a 10-bit ADC, CCP, 24-bit SMT (Signal Measurement Timer), Zero-Cross Detection, and a complementary waveform generator. A PIC microcontroller is a compact, RISC-based 8-bit microprocessor with on-chip Flash, RAM, and peripherals, designed for embedded control tasks. PIC12F16xx devices sit at the low end of the PIC12 family hierarchy, which is part of the broader Microchip 8-bit MCU portfolio spanning PIC10, PIC12, PIC16, and PIC18 families. These tiny MCUs are optimized for cost-sensitive, low-pin-count applications where a full 28- or 40-pin device is overkill. Key features of the PIC12F1612 include 3.5KB (2K x 14) self-programmable Flash program memory, 256 bytes of RAM, 6 I/O pins, an enhanced mid-range 14-bit instruction set, and a 32MHz internal oscillator that eliminates the need for an external crystal. Additional capabilities include a 10-bit ADC with up to 8 channels, 2 PWM modules, I2C and SPI, and a 24-bit SMT for precision timing. The device uses Microchip's enhanced mid-range core with a 14-bit instruction word, supporting interrupts, hardware stack, and 49 instructions. The internal 32MHz oscillator delivers 8 MIPS performance, suitable for motor control loops, LED dimming, and simple state machines without an external clock component. Typical applications include small motor control (BLDC, stepper), general-purpose embedded control, IoT edge nodes, fan control, LED lighting, and consumer appliances. The Zero-Cross Detection and 24-bit SMT make it well-suited for AC line-voltage control and energy metering. When designing with this MCU, allocate at least 1.5KB of Flash for bootloader and application code, use the internal 32MHz oscillator to minimize BOM, and place a 0.1uF decoupling capacitor as close as possible to VDD. The -I/P industrial temperature grade supports -40C to +85C operation. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a single decision-ready reference for selecting and sourcing the PIC12F1612-I/P.

Cotización Contacto

PIC12F1612T-I/MF

PIC12F1612T-I/MF - 8-bit MCU, 3.5KB Flash, 32MHz | Microchip

The Microchip Technology PIC12F1612T-I/MF is an 8-bit PIC microcontroller featuring 3.5KB Flash program memory, 256 bytes of RAM, and a 32 MHz internal oscillator, housed in an 8-pin VDFN (Dual Flat No-lead) exposed-pad package. The "T" suffix denotes tape-and-reel packaging, "I" indicates the industrial temperature grade (-40C to +85C), and "MF" specifies the 8-pin VDFN package with an exposed thermal pad. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (RAM), and programmable I/O peripherals. The PIC12 family belongs to Microchip's 8-bit mid-range core architecture, sitting within the broader taxonomy of embedded microcontrollers -> microcontrollers -> microprocessors -> semiconductors. The PIC12F1612 specifically targets low pin-count applications where compact size, integrated peripherals, and low power are critical. Key differentiating features include on-chip 10-bit Analog-to-Digital Conversion (ADC), Capture/Compare/PWM (CCP) modules, 24-bit Signal Measurement Timer (SMT), Zero-Cross Detection, and Math Accelerator peripherals. These integrated features reduce external component count and BOM cost while supporting applications such as small motor control, LED driving, and sensor signal conditioning. The device operates from 2.3V to 5.5V across the industrial temperature range, providing flexibility for both 3.3V and 5V system designs. The internal 32 MHz oscillator eliminates the need for an external crystal in cost-sensitive designs, and the exposed thermal pad enhances power dissipation for applications running at higher clock rates or in thermally constrained enclosures. Typical applications include small DC motor control (fans, blowers, valve actuators), LED lighting control, sensor interface boards, low-cost consumer appliances, and general-purpose embedded control. The combination of compact 8-pin packaging and rich peripheral integration makes it well suited for space-constrained designs. A key design consideration is the exposed pad on the VDFN package, which must be soldered to the PCB ground plane to meet the specified thermal performance. For applications requiring more memory or peripherals, designers should evaluate the PIC12F1613 or PIC16F1614/1618 variants in larger pin-count packages. This page synthesizes distributor pricing, drop-in alternative cross-references, and practical PCB design notes for the PIC12F1612T-I/MF that are not consolidated on any single manufacturer or distributor page, providing actionable information for both design engineers and component buyers.

Cotización Contacto

PIC12F1822-E/MF

PIC12F1822-E/MF - 8-Bit 32MHz XLP MCU 3.5KB Flash | Microchip

The Microchip PIC12F1822-E/MF is an 8-bit PIC microcontroller from the PIC12F family built on Microchip's enhanced mid-range core, featuring 3.5KB (2K x 14) of Flash program memory, 128 bytes of SRAM, and 256 bytes of EEPROM, packaged in an 8-pin DFN (3x3 mm) industrial-grade enclosure. It operates from 1.8V to 5.5V supply, runs at up to 32 MHz internal oscillator, and integrates nanoWatt XLP (eXtreme Low Power) technology that drops quiescent current to roughly 20 nA in sleep mode. An 8-bit microcontroller (MCU) is a small single-chip computer built around an 8-bit data path; it is the simplest member of the microcontroller hierarchy, sitting below 16-bit MCUs, 32-bit ARM Cortex-M MCUs, and microprocessors. The PIC12F1822 belongs to Microchip's 8-bit PIC microcontroller family, which uses a RISC Harvard architecture and is widely deployed in low-cost, low-power embedded control tasks. Within the broader taxonomy: PIC12F -> PIC10/12/16 family -> 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. Key features include six I/O pins, an integrated 32 MHz internal oscillator with 4x PLL option, 10-bit ADC with up to 8 channels, multiple PWM and enhanced PWM modules, an EUSART, an MSSP (I2C/SPI) module, and an on-chip temperature indicator. The device offers configurable internal pull-ups, interrupt-on-change pins, and a watchdog timer for safety-critical applications. Peripherals are individually enabled via the PMD (Peripheral Module Disable) registers to minimize dynamic power consumption. The PIC12F1822 is implemented in a low-power CMOS process, with supply current scaling linearly with clock speed. The architecture supports 49 instructions, a 16-level hardware stack with overflow/underflow reset, and direct/indirect/relative addressing modes. In-circuit debugging is available via the ICSP interface using PICkit 3, MPLAB ICD 3, or the optional AC244043/AC244044 headers, removing the need for an external debug header. Typical applications include battery-powered sensor nodes, low-end remote controls, LED lighting controllers, energy-harvesting devices, household appliances, and portable medical accessories. The combination of tiny DFN-8 footprint and nanoWatt XLP sleep currents makes it especially attractive for coin-cell and energy-harvesting designs. Designers should choose this part when a sub-$1 MCU with deep-sleep current below 50 nA, 6 usable I/O lines, and a 3x3 mm PCB footprint is needed. Note that the Extended (E) temperature grade spans -40C to +125C, so for cost-sensitive commercial-only designs the -I/MF variant can be considered instead. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone. It is intended as a technical reference complementing the Microchip PIC12F1822 datasheet (DS40001413G).

Cotización Contacto

PIC12F1822-E/P

PIC12F1822-E/P - 8-bit MCU, 3.5KB Flash, 32MHz, 8-PDIP | Microchip

The Microchip Technology PIC12F1822-E/P is an 8-bit RISC microcontroller from the PIC12F family featuring 3.5 KB of FLASH program memory, 128 bytes of RAM, and 256 bytes of EEPROM, housed in an 8-pin PDIP (through-hole) package. The device operates from 1.8 V to 5.5 V (per the family datasheet) and runs at up to 32 MHz internal oscillator speed, delivering 49 instructions with a 16-level hardware stack and 8-bit data path. An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit data bus, integrating a CPU, non-volatile program storage (FLASH/ROM), working memory (RAM), and peripherals. The PIC12F1822 belongs to the PIC12F sub-family -> PIC10/12/16 family -> PIC microcontrollers -> 8-bit microcontrollers -> microcontroller (MCU) -> embedded processor -> integrated circuit hierarchy. It is specifically engineered for low-pin-count, ultra-low-power applications using Microchip's nanoWatt XLP technology, which can reduce sleep current to ~20 nA. Key features include 6 bidirectional I/O pins, four 10-bit ADC channels (shared with I/O), one 5-bit DAC, two comparators, five timers, capture/compare/PWM modules, EUSART, MSSP (I2C/SPI), and integrated ICD (in-circuit debug) support. The 32 MHz internal oscillator provides 8 MIPS throughput. Brown-out Reset (BOR), Power-On Reset (POR), and Watchdog Timer (WDT) provide embedded robustness. Compared to the older PIC12F615/PIC12F508, the PIC12F1822 adds a richer peripheral set and CIP (Core Independent Peripherals). Typical applications include battery-powered sensor nodes, LED control, consumer appliance user-interface boards, and low-cost logic-replacement modules where size and power are critical. The integrated CIP peripherals (e.g., PWM, ADC, comparator) let designers replace discrete analog blocks with deterministic on-chip silicon, reducing BOM cost. When designing with this part, place a 100 nF decoupling capacitor as close to VDD as possible and respect the ICD signal-pin layout (PGC/PGD on RA0/RA1) to enable in-circuit debug via PICkit 3 or MPLAB Snap. The device supports the ICSP programming interface through the same pins. This page synthesizes verified distributor pricing, drop-in compatible alternatives (same 8-pin PDIP footprint), and practical design notes that augment the manufacturer datasheet.

Cotización Contacto

PIC12F1822-I/SN

PIC12F1822-I/SN - 8-Bit XLP MCU, 3.5KB Flash, 32MHz | Microchip

The Microchip Technology PIC12F1822-I/SN is an 8-bit PIC® XLP™ microcontroller featuring a 32MHz internal oscillator, 3.5KB (2K x 14 words) of Flash program memory, 128 bytes of RAM, and 256 bytes of EEPROM, housed in an 8-pin SOIC (SN) package. It belongs to the enhanced mid-range PIC12 family and integrates six general-purpose I/O pins plus one input-only pin, making it suitable for compact, low-pin-count designs. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash/ROM), data memory (RAM), non-volatile storage (EEPROM), and peripheral interfaces onto one silicon die. The PIC12F1822 uses Microchip's RISC-based PIC architecture with 200 ns instruction execution, a single-cycle oscillator, and nanoWatt XLP technology. Within the product hierarchy, this places it as: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. The XLP nanoWatt feature set enables ultra-low sleep currents below 50 nA typical, which is critical for battery-powered applications. Key features include 6 I/O pins with individual direction control, an internal 32MHz oscillator (selectable from 31kHz to 32MHz via software), a 10-bit ADC with up to 8 channels, two 8-bit timers plus one 16-bit timer, enhanced PWM modules (ECCP + CCP), hardware USART, I2C, and SPI peripherals, and an integrated temperature indicator. It also supports capacitive-touch sensing via the mTouch™ peripheral and includes an on-chip debug interface. Typical applications include battery-powered sensor nodes, IoT end devices, LED lighting controllers, consumer appliance user-interface controllers, smart-home sensor hubs, and hobbyist/Maker projects using the Curiosity development board. Designers benefit from in-circuit serial programming (ICSP) for low-voltage programming and debug without a separate header. When designing with this part, ensure VDD decoupling with 100nF ceramic capacitors close to the supply pin. For ICSP, dedicate pins to ICSPCLK and ICSPDAT, and avoid placing large capacitors on those lines. The wide 1.8V-5.5V operating range allows direct Li-ion battery operation.

Cotización Contacto

PIC12F1822T-E/MF

PIC12F1822T-E/MF - 8-bit MCU, 3.5KB Flash, 32MHz, DFN-8

The Microchip Technology PIC12F1822T-E/MF is an 8-bit enhanced mid-range PIC12 microcontroller built on nanoWatt XLP (eXtreme Low Power) technology, delivering 32 MHz performance from a 3.5 KB Flash program memory and 128 B SRAM in an 8-pin DFN-EP package on tape-and-reel. According to the Microchip product family brief, the PIC12F1822 family integrates a precision 32 MHz internal oscillator, 10-bit ADC with computation (ADC2), up to four PWM modules, and configurable logic cells that replace simple external glue logic. What is an 8-bit PIC microcontroller? An 8-bit PIC microcontroller is a RISC-based CMOS microcomputer from Microchip Technology that executes one instruction per cycle (typically 200 ns at 20 MHz, 125 ns at 32 MHz) and is part of the broader microcontroller > microcomputer > embedded IC hierarchy. The PIC12 sub-family targets ultra-small pin-count (8-pin and 14-pin) applications where board space, low quiescent current, and integrated peripherals matter more than raw computational throughput. Key features of the PIC12F1822T-E/MF include 3.5 KB self-programmable Flash with 256 B EEPROM, 128 B RAM, six I/O pins plus one input-only pin, and a 32 MHz internal oscillator accurate to within ±1% across voltage and temperature. Peripherals include a 10-bit ADC, two 8-bit timers and one 16-bit timer, enhanced USART, MSSP (SPI/I2C), up to four 10-bit PWM outputs with complementary and dead-band control, and configurable logic cells (CLC) that implement combinational/sequential logic in hardware. The architecture uses a 14-bit instruction word with an 8-level hardware stack, 32-byte access bank for fast SFR access, and a vectored interrupt controller with context save-on-entry. The XLP technology delivers typical sleep currents below 20 nA at 1.8 V, watchdog timer currents around 400 nA, and active currents around 50 µA/MIPS at 1 MHz / 1.8 V, making the part attractive for battery-powered and energy-harvesting designs. Typical applications include automotive sensor interfaces (the -E suffix denotes -40°C to +125°C automotive temperature grade), low-power IoT sensor nodes, LED lighting controllers, consumer appliance user interfaces, and small motor-control loops using the integrated PWM and CLC blocks. The wide 1.8 V to 5.5 V operating range allows direct connection to 2-cell battery stacks or 5 V rails without external level shifting. When designing with the PIC12F1822T-E/MF, leverage the integrated 32 MHz oscillator to avoid external crystals, reserve one I/O for ICSP programming, and place a 0.1 µF decoupling capacitor within 5 mm of the VDD pin. The DFN-EP exposed pad must be soldered to a thermal pad on the PCB for proper thermal dissipation. This page synthesizes distributor pricing, drop-in alternatives from the PIC12 family, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto

PIC12F1822T-I/MF

PIC12F1822T-I/MF - 8-bit 32MHz 3.5KB Flash MCU | Microchip

The Microchip PIC12F1822T-I/MF is an 8-bit PIC microcontroller from the PIC12 enhanced mid-range lineup, featuring 3.5KB (2K x 14) of Flash program memory, 128 bytes of RAM, and 256 bytes of EEPROM in a compact 8-pin DFN (3x3 mm) package. It executes instructions at 200 ns (5 MIPS at 32 MHz) while supporting a wide 1.8V to 5.5V operating voltage range and consuming as little as 20 nA in sleep mode, making it one of Microchip's nanoWatt XLP eXtreme Low-Power family members. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O onto one silicon die. The PIC family falls under the broader hierarchy: 8-bit microcontroller -> microcontroller -> embedded processor -> semiconductor. MCUs run firmware stored in non-volatile memory and target deterministic real-time control tasks, in contrast to microprocessors that require external memory and run operating systems. The PIC12 sub-family targets low-pin-count, cost-sensitive, battery-powered designs where smallest PCB footprint and lowest quiescent current are critical. Key features include an integrated 32 MHz internal oscillator (no external crystal required), 6 I/O pins, four 10-bit ADC channels, two PWM modules, three timers, an Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART), and an MSSP module supporting SPI and I2C. The on-chip debugger and ICSP programming interface eliminate external debug headers on basic designs, and a Peripheral Pin Select (PPS) remaps digital peripherals to any I/O pin. The PIC12F1822 architecture uses a 14-bit instruction word RISC core with a hardware stack and 32-level deep interrupt priority, enabling deterministic interrupt response. Internal voltage reference, comparators, and a configurable logic cell (CLC) allow analog signal conditioning without external components, while nanoWatt XLP technology provides multiple low-power modes (sleep, dozing, peripheral module disable) for energy harvesting and coin-cell applications. Typical applications include IoT sensor nodes, battery-powered remote controls, wearable health monitors, LED lighting controllers, low-end motor control (small DC fans and BLDC drivers), white goods user-interface boards, and consumer peripherals. Industrial uses include 4-20 mA loop-powered sensor transmitters, HVAC damper actuators, and small appliance control boards. When designing with this device, derate the maximum clock frequency linearly below 2.3V to 16 MHz. Place a 0.1 uF decoupling capacitor within 3 mm of VDD and a 10 uF bulk capacitor near the package. Avoid using the ICSP pins as high-current outputs because the in-circuit debugger shares those pads. This page consolidates distributor pricing, drop-in same-package alternatives, application circuits, and design notes that complement the manufacturer datasheet.

Cotización Contacto

PIC12F1822T-I/RF

PIC12F1822T-I/RF - 8-Bit MCU, 3.5KB Flash, 32MHz, 8-UDFN | Microchip

The Microchip PIC12F1822T-I/RF is a nanoWatt XLP 8-bit PIC microcontroller based on the Enhanced Mid-Range core, offering 3.5KB Flash program memory (2K x 14), 128 bytes of SRAM, and 256 bytes of Data EEPROM in an 8-pin UDFN (3x3x0.5mm) surface-mount package. It operates across 1.8V to 5.5V with internal 32MHz oscillator support, integrates 6 I/O pins, and targets AEC-Q100 automotive-grade applications with an industrial -40C to +85C temperature range. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), non-volatile data storage (EEPROM), and programmable I/O peripherals. PIC microcontrollers from Microchip use a RISC Harvard architecture with separate program and data buses, providing deterministic single-cycle instruction execution. The 8-bit PIC12F family is positioned for cost-sensitive, space-constrained embedded designs that require low power consumption and minimal pin count, and sits within the broader semiconductor hierarchy of microcontrollers, embedded processors, and integrated circuits. Key features include nanoWatt XLP technology for ultra-low-power sleep modes (down to sub-microamp quiescent currents), an internal 32MHz high-speed oscillator selectable via configuration bits, an on-board 10-bit ADC with computation, and multiple communication peripherals including EUSART, MSSP (SPI/I2C), and PWM modules. The device also integrates a configurable logic cell (CLC), Complementary Waveform Generator (CWG), and Numerically Controlled Oscillator (NCO) for flexible signal generation without external components. Typical applications include battery-powered IoT sensor nodes, automotive body and lighting controllers, white-goods user interfaces, low-cost motor control, and consumer remote controls. The 8-UDFN package footprint of 3x3mm is one of the smallest available for PIC MCUs, enabling dense PCB layouts in wearables and space-constrained modules. When designing with the PIC12F1822T-I/RF, prioritize decoupling capacitor placement near the VDD pin and use the MPLAB X IDE with the XC8 compiler for firmware development. The integrated debug logic via ICSP allows in-circuit programming without a debug header, reducing BOM cost for prototype to production transition. Ensure configuration bits are properly set for the desired oscillator source before code deployment.

Cotización Contacto

PIC12F1840-E/MF

PIC12F1840-E/MF - 8-bit 32MHz 7KB Flash MCU 8-DFN | Microchip

The Microchip Technology PIC12F1840-E/MF is an 8-bit PIC® XLP™ flash microcontroller delivering 32 MHz CPU performance with 7 KB (4K x 14) of program Flash and 256 bytes of EEPROM, housed in an 8-pin DFN (3x3 mm) surface-mount package. The part integrates six general-purpose I/O pins, an internal 32 MHz oscillator, multiple serial communication peripherals including I²C, SPI, and EUSART, plus a 10-bit ADC and PWM/timer/capture modules, all on a single CMOS die designed for nanoWatt XLP low-power operation. The operating voltage range spans 1.8 V to 5.5 V with extended (-40 °C to +125 °C) industrial temperature grade, enabling battery-powered and harsh-environment designs. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash/ROM), volatile data memory (RAM), non-volatile data memory (EEPROM), and configurable peripheral blocks such as timers, ADCs, and communication controllers. Within the broader hierarchy of semiconductor devices, an MCU sits under microcontrollers -> microcomputer ICs -> integrated circuits. The PIC12F1840 belongs to Microchip's enhanced mid-range 8-bit PIC12 family, which traces its lineage back to the original Harvard-architecture PIC® RISC cores and is the smallest-footprint 8-bit MCU family Microchip ships in production. Key features include 7 KB self-programmable Flash, 256-byte EEPROM, 256-byte SRAM, six I/O pins, four 10-bit PWM outputs, four 10-bit ADC channels, a comparator module, and nanoWatt XLP sleep currents as low as 20 nA typical, with an active current of approximately 1.8 mA at 4 MHz / 2 V. Core-independent peripherals such as the Configurable Logic Cell (CLC), Numerically Controlled Oscillator (NCO), and Complementary Waveform Generator (CWG) offload timing-critical tasks from the CPU, allowing continued peripheral operation in sleep mode. The integrated 32 MHz internal oscillator eliminates the need for an external resonator in space-constrained designs. Typical applications include battery-powered IoT sensor nodes, portable consumer devices, LED lighting controllers, low-cost motor control, and remote/wireless control transmitters. The wide 1.8 V-5.5 V operating range and nanoWatt XLP sleep performance make it especially suitable for energy-harvesting and coin-cell applications where quiescent current is critical. When designing with this device, allocate the six I/O pins carefully because three are shared with the ICSP programming interface, leaving only three usable for application I/O if ICSP is retained in-circuit. Place a 100 nF decoupling capacitor within 5 mm of the VDD pin and reserve the exposed pad (DFN package) for proper thermal dissipation and ground return. The internal 32 MHz oscillator is factory calibrated to ±2% typical, so designs that need precise UART baud rates over temperature should use the PLL or external crystal options. This page synthesizes distributor stock and pricing, drop-in package-equivalent alternatives, and practical design notes that are not consolidated in the manufacturer datasheet alone, helping procurement and design engineers evaluate the PIC12F1840-E/MF against pin-compatible options in the Microchip PIC10/PIC12/PIC16 families.

Cotización Contacto

PIC12F1840-E/P

PIC12F1840-E/P - 8-bit MCU, 7KB Flash, nanoWatt XLP DIP-8

The Microchip Technology PIC12F1840-E/P is an 8-bit enhanced mid-range flash microcontroller featuring 7KB of Flash program memory, 256 bytes of EEPROM, and 256 bytes of RAM, all integrated into a 300-mil 8-pin PDIP (P) through-hole package. Operating from 1.8V to 5.5V with nanoWatt eXtreme Low Power (XLP) technology, it delivers active current as low as 50 µA/MHz at 3V and sleep currents down to 20 nA, making it ideal for battery-powered edge nodes. The core executes instructions in a single 200 ns cycle across a 49-instruction set with 16 stack levels. A PIC microcontroller is a compact, deterministic CMOS processor built on a Harvard RISC architecture with separate program and data buses, widely used in embedded designs that require low power, low cost, and small footprint. Within the broader taxonomy, the PIC12F1840 sits in the hierarchy: PIC microcontroller -> 8-bit MCU -> enhanced mid-range core -> flash MCU with XLP -> embedded controller. This positioning explains why the part is so common in consumer, IoT, and industrial sensor front-ends where deterministic interrupt latency and ultra-low standby current matter more than raw compute throughput. Key features include six I/O pins with independent weak pull-ups and interrupt-on-change, four 10-bit ADC channels, two 8-bit timers and one 16-bit timer, a Capture/Compare/PWM (CCP) module, an Enhanced Universal Synchronous/Asynchronous Receiver/Transmitter (EUSART), and an integrated configurable reference and temperature indicator. The device supports in-circuit serial programming (ICSP) and in-circuit debugging through PICkit 3, MPLAB ICD 3, or the MPLAB Snap programmer. Architecturally, the PIC12F1840 uses Microchip's enhanced mid-range core with a 14-bit instruction word and an internal 32 MHz oscillator, alongside an 8 MHz calibrated HFINTOSC factory-trimmed to ±1%. The internal oscillator eliminates external crystals in most designs and reduces BOM cost. The XLP family design minimizes dynamic and leakage power, allowing years of operation from a single coin cell. Typical applications include battery-backed sensor nodes, LED lighting controllers, low-power remote controls, simple motor drivers, and home automation peripherals. The combination of nanoWatt sleep modes and fast wake-up from interrupt makes the part well suited to event-driven IoT endpoints. When designing with this device, plan the I/O pinout carefully - only six of the eight pins are general-purpose because VDD, VSS, and ICSPCLK/ICSPDAT also share pins. Use MPLAB X IDE with XC8 compiler and reserve a pull-up on MCLR unless the internal MCLR is enabled. For low-power designs, configure unused peripherals to OFF and use the deep-sleep current of approximately 20 nA.

Cotización Contacto

PIC12F1840-E/SN

PIC12F1840-E/SN - 8-bit 32MHz 7KB Flash MCU | Microchip | SOIC-8

The Microchip Technology PIC12F1840-E/SN is an 8-bit PIC® microcontroller with nanoWatt XLP technology, featuring 7KB (4K x 14) FLASH program memory, 256 bytes RAM, and 256 bytes EEPROM in an 8-pin SOIC package. It operates up to 32MHz internal oscillator speed and runs from 2.5V to 5.5V supply. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripherals around an 8-bit data path. The PIC12F1840 belongs to the enhanced mid-range PIC12 family, which sits in the broader hierarchy: PIC12 -> PIC10/12/16/18 family -> 8-bit PIC microcontroller -> microcontroller -> embedded processor -> semiconductor. The 8-bit MCU category is widely used in cost-sensitive, low-power embedded designs where deterministic instruction execution and ultra-low standby current matter more than raw computational throughput. Key features include six I/O pins, an integrated 32MHz internal oscillator, 12-bit ADC with computation, multiple communication peripherals (I²C, SPI, EUSART), and Microchip's nanoWatt XLP energy-saving modes that allow standby current below 100nA typical. The 'E' temperature grade suffix denotes the Extended operating range of -40C to +125C, suitable for industrial and harsh-environment designs. Architecturally, the PIC12F1840 uses a RISC Harvard architecture with 49 instructions, 16-level hardware stack, and 200ns instruction execution at 20MHz. Its peripheral set includes enhanced PWM modules, configurable logic cells (CLC), numerically controlled oscillator (NCO), and complementary waveform generator (CWG), enabling flexible signal generation without external components. Typical applications include IoT sensor nodes, battery-powered remote controls, low-power wireless sensor interfaces, LED lighting controllers, home automation edge nodes, and portable medical accessories where low quiescent current extends battery life. When designing with this part, ensure MPLAB X IDE and XC8 compiler compatibility. Decoupling: place a 100nF ceramic capacitor within 5mm of VDD, with VSS star-grounded. The internal oscillator eliminates external crystals but can be calibrated via OSCTUNE for tight timing applications. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto

PIC12F1840-I/P

PIC12F1840-I/P - 8-bit 32MHz XLP MCU 7KB Flash | Microchip

The Microchip Technology PIC12F1840-I/P is an 8-bit PIC microcontroller in the enhanced mid-range core family with 7KB (4K x 14) Flash program memory, 256 bytes of EEPROM, and 256 bytes of RAM, housed in an 8-pin PDIP through-hole package. It operates at up to 32 MHz internal clock speed from a 1.8V to 5.5V supply, delivering 49 instructions with 16-level hardware stack, interrupt context saving, and nanoWatt XLP extreme-low-power technology for battery-sensitive designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, RAM, and programmable peripherals into one package. The PIC12F1840 belongs to the 8-bit PIC microcontroller family, itself a subfamily of microcontrollers within the broader integrated circuit and embedded systems taxonomy. Its XLP variants extend the family into ultra-low-power domains where quiescent current is measured in nanoamperes, making the PIC12F1840-I/P a hybrid of compact 8-pin form factor and modern low-power performance. Key features include six I/O pins multiplexed with peripherals such as a 10-bit ADC, two 8-bit timers, one 16-bit timer, Enhanced PWM, MSSP for SPI/I2C, EUSART, and configurable logic cells. The device supports internal 32 MHz oscillator, 31 kHz LFINTOSC, and PLL, eliminating external crystals in many designs. Core peripherals include a WWDT windowed watchdog, BOR/POR power management, in-circuit serial programming (ICSP), and code protection via Microchip's low-pin-count IP (US Patent 5,847,450). Architecturally, the PIC12F1840 uses a RISC Harvard CPU with separate program and data buses, single-cycle instruction execution at 32 MHz (125 ns instruction time), and 16-deep hardware stack. The flash memory is self-read/write capable, supporting live firmware updates and data EEPROM emulation. XLP technology provides sleep currents as low as 20 nA typical, with multiple power-managed operating modes (Run, Idle, Sleep) selectable in software. Typical applications include consumer remote controls, sensor node interfaces, battery-powered IoT edge devices, simple motor control loops, LED driving, and low-cost educational platforms. The 8-pin PDIP form factor is also widely used in retrofits for legacy PIC12F675/PIC12F683 designs, since the PIC12F1840 offers a clean migration path with substantially more memory and peripherals. When designing with this device, ensure decoupling caps (100 nF + 10 uF bulk) are placed close to VDD/VDDCORE pins, MCLR is pulled up correctly for ICSP, and unused I/O pins are configured as outputs low to minimize current. For automotive or AEC-Q100 work, the PIC12F1840-I/P industrial grade operates from -40C to +85C, so consult the automotive grade separately if required. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto

PIC12F1840-I/SN

PIC12F1840-I/SN - 8-bit XLP MCU 32MHz 7KB Flash SOIC-8 | Microchip

The Microchip Technology PIC12F1840-I/SN is an 8-bit Flash microcontroller from the PIC XLP 12F family, offering a 32 MHz internal oscillator, 7 KB (4K x 14) Flash program memory, 256 bytes of EEPROM, and 256 bytes of SRAM in an 8-pin SOIC package. It runs from 2.5 V to 5.5 V with industry-leading nanoWatt XLP sleep currents below 20 nA in deep sleep. A microcontroller (MCU) is a single-chip computer containing a CPU core, program and data memory, programmable I/O peripherals, and communication interfaces. The PIC12F1840 uses an Enhanced Mid-Range 8-bit core with 49 instructions and a 16-level hardware stack, sitting in the taxonomy chain microcontroller -> embedded controller -> semiconductor IC. It is designed for low-pin-count, battery-powered, and always-on applications. Key features include an internal 32 MHz oscillator, four 10-bit ADC channels, a configurable mTouch capacitive sensing module, a Data Signal Modulator (DSM), an EUSART with auto-baud, an MI2C/SPI interface, a 25 mA source/sink I/O, and a comparator with selectable voltage reference. The integrated ECCP (Enhanced Capture/Compare/PWM) module supports half-bridge, full-bridge, and PWM steering topologies for lighting and motor control. The 8-pin SOIC (SN) package makes the PIC12F1840-I/SN an ideal drop-in upgrade for legacy PIC12F675 designs that need more memory, more peripherals, and lower sleep current. PIC XLP nanoWatt technology combined with active clock tuning and ultra-low-power wake-up sources enables multi-year coin-cell operation in remote sensor nodes. Typical applications include consumer appliances, IoT end nodes, LED lighting controllers, capacitive touch user interfaces, sensor conditioning, and remote controls. The wide operating range (industrial -40 °C to +85 °C) and rich peripheral set make it a strong fit for space-constrained mixed-signal designs. When designing with the PIC12F1840, ensure decoupling capacitors of 0.1 µF are placed within 5 mm of VDD, and that unused I/O are configured as outputs to minimize sleep current. Programming is supported by the free MPLAB X IDE and Xpress, PICkit, or Curiosity programmers - a key advantage over cross-brand 8-bit alternatives that often lack a unified, free toolchain. This page synthesizes drop-in alternatives, package-matched cross-references, and practical design notes that complement, but do not replace, the manufacturer datasheet.

Cotización Contacto

PIC12F1840T-I/RF

PIC12F1840T-I/RF - 8-bit 32MHz XLP MCU 7KB Flash | Microchip

The Microchip PIC12F1840T-I/RF is an 8-bit Flash microcontroller based on the enhanced mid-range PIC® core with XLP (eXtreme Low Power) technology, delivered in an 8-pin UDFN (3x3 mm) package with exposed pad. It integrates 7 KB of Flash program memory, 256 bytes of RAM, and 256 bytes of EEPROM data memory, and runs at up to 32 MHz internal oscillator speed from a 1.8V to 5.5V supply. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and peripheral interfaces such as timers, ADC, communications, and I/O. PIC12-series parts are 8-bit Harvard-architecture devices in the broader microcontroller taxonomy: MCU -> 8-bit MCU -> PIC microcontroller -> PIC12 family -> enhanced mid-range core. Their 49-instruction, 16-level hardware stack RISC engine enables deterministic interrupt response in real-time control loops. Key features include a 4-channel 10-bit ADC with internal voltage reference, one enhanced capture/compare/PWM (ECCP) module, one MI2C/SPI/EUSART with auto-baud peripheral, two comparators with selectable references, an integrated mTouch capacitive sensing module, a data signal modulator (DSM), and 25 mA source/sink I/O for direct LED drive. XLP technology supports nanoWatt sleep currents below 100 nA typical, which is essential for battery-powered sensor nodes. The architecture uses a 14-bit instruction word with an 8-bit data path, a 16-level hardware stack, and self-read/write Flash. The integrated 32 MHz high-precision internal oscillator eliminates the need for an external crystal on cost-sensitive boards and reduces the BOM. The exposed thermal pad on the UDFN package provides a low thermal resistance path for higher-current I/O switching. Typical applications include IoT sensor nodes, wearable health devices, low-power remote controls, LED lighting controllers, capacitive touch user interfaces, and battery-backed security/keypad modules. The combination of a 10-bit ADC, ECCP PWM, and EUSART with auto-baud also suits brushed-DC fan control and simple BLDC commutation logic. When designing with the PIC12F1840, leave the exposed pad (EP) soldered to the ground plane for thermal dissipation and supply decoupling. Always decouple VDD with a 0.1 uF ceramic close to the pin and place the ICSP programming pins (ICSPCLK/ICSPDAT) on dedicated test points or a 6-pin header to enable in-circuit debugging with the MPLAB Snap or PICkit. This page synthesizes distributor pricing from Mouser/DigiKey, drop-in same-package alternatives, and practical design notes that are not found in the standalone manufacturer datasheet. All data is sourced from verified distributor pages and Microchip's official PIC12F1840 datasheet.

Cotización Contacto

Subcategorías

Productos (39.000+)

PIC12F1572-I/MF - 8-bit 32MHz MCU, 3.5KB Flash, 8-DFN | Microchip

PIC12F1572-I/MS - 8-bit MCU, 32MHz, 3.5KB Flash, 16-bit PWM | Microchip

PIC12F1572-I/P - 8-bit 32MHz 3.5KB Flash MCU 8-PDIP | Microchip

PIC12F1572-I/RF - 8-bit MCU, 32MHz, 3.5KB Flash, 16-bit PWM | Microchip

PIC12F1572-I/SN - 8-Bit MCU, 32MHz, 3.5KB Flash | Microchip

PIC12F1572T-I/MF - 8-bit MCU 32MHz 3.5KB Flash 8-DFN | Microchip

PIC12F1572T-I/RF - 8-Bit MCU, 32MHz, 3.5KB Flash, 8-UDFN | Microchip

PIC12F1612-E/MF - 8-bit MCU, 3.5KB Flash, 32MHz, 8-DFN | Microchip

PIC12F1612-E/SN - 8-bit 32MHz MCU, 3.5KB Flash | Microchip

PIC12F1612-I/MF - 8-bit MCU, 32MHz, 3.5KB Flash, 8-DFN | Microchip

PIC12F1612-I/P - 8-Bit MCU, 3.5KB Flash, 32MHz | Microchip

PIC12F1612T-I/MF - 8-bit MCU, 3.5KB Flash, 32MHz | Microchip

PIC12F1822-E/MF - 8-Bit 32MHz XLP MCU 3.5KB Flash | Microchip

PIC12F1822-E/P - 8-bit MCU, 3.5KB Flash, 32MHz, 8-PDIP | Microchip

PIC12F1822-I/SN - 8-Bit XLP MCU, 3.5KB Flash, 32MHz | Microchip

PIC12F1822T-E/MF - 8-bit MCU, 3.5KB Flash, 32MHz, DFN-8

PIC12F1822T-I/MF - 8-bit 32MHz 3.5KB Flash MCU | Microchip

PIC12F1822T-I/RF - 8-Bit MCU, 3.5KB Flash, 32MHz, 8-UDFN | Microchip

PIC12F1840-E/MF - 8-bit 32MHz 7KB Flash MCU 8-DFN | Microchip

PIC12F1840-E/P - 8-bit MCU, 7KB Flash, nanoWatt XLP DIP-8

PIC12F1840-E/SN - 8-bit 32MHz 7KB Flash MCU | Microchip | SOIC-8

PIC12F1840-I/P - 8-bit 32MHz XLP MCU 7KB Flash | Microchip

PIC12F1840-I/SN - 8-bit XLP MCU 32MHz 7KB Flash SOIC-8 | Microchip

PIC12F1840T-I/RF - 8-bit 32MHz XLP MCU 7KB Flash | Microchip