Microcontroladores

Productos (20.000+)

MAC7111MPV40 - 32-Bit RISC MCU, 512KB Flash | Freescale
MAC7111MPV40

MAC7111MPV40 - 32-Bit RISC MCU, 512KB Flash | Freescale

Freescale Semiconductor MAC7111MPV40 is a 32-bit RISC microcontroller with 512 KB of flash memory in a 144-terminal automotive-temperature LFQFP package. The verified source data identifies it as an automotive-grade microcontroller with gull-wing terminals and a square package. Its position in the embedded hierarchy is microcontroller, embedded processor, RISC processor, and semiconductor. The MAC7111MPV40 combines embedded flash, external-bus-oriented connectivity, and analog-to-digital conversion capabilities in a single device. The source data specifically identifies a 16-channel ADC and an external bus, while detailed conversion resolution, bus timing, clock architecture, voltage limits, and peripheral list are not present in the supplied verified records. Those values remain marked as data needed rather than inferred. Its automotive temperature designation makes the device relevant to vehicle electronics requiring a substantial embedded-programming and peripheral footprint. The 144-terminal LFQFP provides many external connections compared with small general-purpose MCUs, but it also demands careful board layout and a larger land pattern than leadless packages. Designers should preserve the manufacturer reference-manual pin assignments when creating a new PCB. Typical application areas include automotive body and chassis control, sensor aggregation, actuator control, gateway modules, and embedded vehicle-network electronics. The external bus can connect the MCU to additional peripherals, while the 16-channel ADC supports analog sensor and vehicle-signal acquisition. Exact timing, electrical limits, and software-support details must be checked in the MAC7111 hardware documentation before release. For PCB design, use the manufacturer package drawing and pinout rather than distributor category summaries. Confirm all 144 terminal names, exposed-pad requirements, power rails, ground connections, oscillator circuits, and external-bus routing. Because verified lifecycle, supply, and price data are not supplied, procurement should use authorized-channel confirmation rather than assumptions. This page consolidates verified package, memory, interface, and marketplace-source information while clearly separating it from unavailable technical data. It also explains the sourcing and design limits engineers must resolve from the manufacturer hardware documentation.

Cotización Contacto
MAC7111MPV50-FR 50MHz 512KB Flash ARM7 MCU | NXP
MAC7111MPV50-FR

MAC7111MPV50-FR 50MHz 512KB Flash ARM7 MCU | NXP

The NXP Semiconductors MAC7111MPV50-FR is a 32-bit single-core ARM7TDMI-S microcontroller operating at 50 MHz, with 512 KB of flash memory, in a 144-LQFP surface-mount package. The verified distributor listing identifies an automotive-grade gull-wing package with 144 terminals and a square 20 mm by 20 mm body. These core figures position the device for embedded control systems requiring deterministic processing, substantial on-board program storage, and a high pin count for external interfaces. A microcontroller is a semiconductor that integrates a processor core, nonvolatile program memory, data memory, peripheral controllers, and interface logic into one embedded-computing device. Within the hierarchy of semiconductor, integrated circuit, embedded processor, and microcontroller, the MAC7111MPV50-FR belongs to the ARM7TDMI-S product class. That processor organization is intended for embedded control rather than a desktop operating system, making the device relevant to automotive electronics, industrial controllers, communication equipment, and real-time control products. The verified product information establishes a 50 MHz operating frequency, 512 KB flash, 32-bit single-core processing, and 144-LQFP packaging. One search result also characterizes the part as automotive-grade, while the family hardware document contains electrical specifications, pin assignments, and package diagrams. Flash capacity provides room for embedded code and constants, but the supplied excerpts do not expose RAM size, peripheral inventory, memory-map details, or electrical limits; those values must be verified in the full manufacturer hardware document before schematic or firmware work. Engineers should treat the 144-pin LQFP as a substantial mixed-signal and digital controller package. The 20 mm by 20 mm footprint requires adequate routing area, exposed escape access, and careful assembly planning. Its gull-wing leads are more visually inspectable than fine-pitch BGA interconnects, but they still require controlled fanout, solder mask definition, and thermal verification. The family document's pin assignments should govern connector, ground, supply, clock, and peripheral routing. Typical engineering uses include automotive body and communication modules, industrial automation equipment, networked embedded controllers, and compact real-time systems. Suitability depends on validating the exact peripheral set, memory resources, electrical characteristics, temperature range, and software constraints. No assumption should be made merely because another 50 MHz controller has a similar headline specification; software architecture and peripheral compatibility are as important as clock speed. A legacy or unavailable MCU replacement must be treated as a risk-management decision. Confirm package dimensions, pin assignments, power behavior, peripheral multiplexing, clock topology, memory, and software binary compatibility before substituting. This page combines verified distributor identification, package data, sourcing information, and explicit uncertainty markers rather than inferring unsupported specifications. The practical information gain here is the separation of verified facts from missing engineering data: the 50 MHz ARM7TDMI-S core, 512 KB flash, and 144-LQFP footprint are usable selection facts, while unspecified RAM, pins, electrical limits, and lifecycle status remain explicit validation items.

Cotización Contacto
MAC7111VPV50 - 32-Bit 50MHz ARM7 MCU | NXP
MAC7111VPV50

MAC7111VPV50 - 32-Bit 50MHz ARM7 MCU | NXP

The NXP Semiconductors MAC7111VPV50 is a 32-bit ARM7 microcontroller operating at 50 MHz, with 512 KB of flash memory and a 144-LQFP (20x20 mm) package. According to the verified distributor listings, its supply voltage range is 2.35 V to 5.5 V, and it provides a 10-bit ADC feature identified in the retrieved component data. The device is positioned for industrial embedded-control designs requiring substantial embedded flash and a high pin count. An MCU is an integrated circuit that combines a processor core, nonvolatile program memory, data memory, peripherals, and interface logic on one semiconductor device. The MAC7111VPV50 belongs to the ARM7-based embedded-controller hierarchy: MCU, embedded processor, microcontroller, and semiconductor. This integration allows a controller board to execute firmware and supervise external sensors, actuators, communications, and power functions without requiring separate memory and processor packages. Verified headline features include ARM7 architecture, 32-bit processing, a 50 MHz clock, 512 KB organized as 512K x 8 flash, 144 terminals, a gull-wing terminal form, an industrial temperature grade, and an LFQFP package. The high pin count can support systems requiring numerous I/O resources, while 512 KB of flash provides room for embedded firmware. The exact RAM, core peripherals, ADC resolution beyond the listed 10-bit indication, and individual I/O functions are not supplied in the verified data. The MAC7111VPV50 is identified as an industrial-grade microcontroller rather than a power semiconductor. Accordingly, no safe operating area is applicable. Its design use should be based on the manufacturer family hardware specifications and board-support requirements. Before schematic release, engineers must verify the complete pin assignment, alternate-function multiplexing, recommended external components, clock configuration, programming method, and operating limits from the official family document. Potential uses include industrial automation controllers, IoT equipment, embedded motor-control supervisory logic, metering systems, and low-power board designs. The 50 MHz ARM7 core and 512 KB flash make the device relevant where deterministic embedded software and a moderate code footprint are needed. Its 144-LQFP package is larger than modern leadless MCU packages but exposes many terminals and can simplify access to communications, general-purpose I/O, and control functions when exact pin verification is completed. When designing around this MCU, preserve the package footprint, pin numbering, exposed programming signals, power rails, decoupling requirements, and clock network exactly as defined by the family documentation. Because no verified drop-in alternatives were returned, engineers should not substitute an MPN based only on processor speed or memory size. Firmware, timing, peripheral mapping, voltage levels, and package-level compatibility must all be revalidated before any replacement is approved. This product page consolidates the verified distributor specifications, sourcing links, package identity, application context, and design limitations for MAC7111VPV50. It adds engineering-oriented selection guidance while explicitly separating known values from data that still requires confirmation from the manufacturer family hardware specifications.

Cotización Contacto
MAC7112MAG40 - 40MHz 32-Bit Automotive MCU | NXP
MAC7112MAG40

MAC7112MAG40 - 40MHz 32-Bit Automotive MCU | NXP

The NXP MAC7112MAG40 is a 32-bit ARM7TDMI-S microcontroller operating at 40 MHz, with 256 KB of Flash program memory, 16 KB of RAM, and 32K x 8 EEPROM in a 144-pin LQFP package measuring 20 x 20 mm. Designed for embedded automotive applications, the device combines a single-core processor, external-bus capability, and 16-channel A/D conversion in one integrated MCU. Its stated 2.5 V / 5 V operating-voltage support and -40°C to +125°C temperature range make it relevant to demanding automotive control and monitoring systems. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and I/O into one device. In the hierarchy, the MAC7112MAG40 is an MCU, embedded processor, and semiconductor, with the ARM7TDMI-S core providing 32-bit RISC execution. Its Flash memory supports firmware storage, while RAM provides working memory for real-time control tasks. The 32K x 8 EEPROM adds nonvolatile data storage for calibration values, configuration data, and diagnostic records. The verified feature set includes a 40 MHz operating frequency, 256 KB Flash, 16 KB RAM, 32K x 8 EEPROM, 144-LQFP packaging, external-bus support, and 16-channel A/D conversion. The package is a tray-packaged automotive MCU according to the supplied distributor information. Partstack data identifies CMOS technology, a 260°C peak reflow temperature, an e3 JESD-609 code, tin terminal finish, and a 40-second maximum dwell at peak reflow temperature. The MAC7112MAG40 fits applications such as body and chassis electronics, powertrain supervisory controls, vehicle communication gateways, sensor aggregation, actuator controllers, and diagnostic systems. Its 16-channel ADC supports analog sensor acquisition, while its external bus can connect the MCU to additional controllers, memory, or communication devices. The -40°C to +125°C range is especially important for automotive environments, although the exact operating region for every internal peripheral should be confirmed in the manufacturer datasheet. Designers should verify power sequencing, clocking, reset behavior, ADC reference, external-bus timing, and unused-pin handling against the manufacturer documentation before layout release. The 144-pin LQFP package requires careful escape routing and thermal review. Automotive production also requires supplier traceability, programming, test, and change-control procedures beyond basic electrical compatibility. This page consolidates verified distributor snippets, the supplied cross-reference results, and engineering guidance without treating unverified alternatives as drop-in parts. Because the retrieved data does not establish five pin-compatible replacements, no unsupported substitute list is presented.

Cotización Contacto
MAC7112MPV40 - 40MHz ARM7 MCU, 256KB Flash | NXP
MAC7112MPV40

MAC7112MPV40 - 40MHz ARM7 MCU, 256KB Flash | NXP

The NXP Semiconductors MAC7112MPV40 is a 32-bit ARM7TDMI-S microcontroller operating at 40 MHz, with 256 KB of flash memory and a 112-LQFP package measuring 20 mm by 20 mm. The verified distributor data also identifies an external bus, a 16-channel 10-bit A/D converter, and a 2.35 V to 2.75 V operating-supply range. These characteristics place it in the embedded microcontroller category, where a processor core, memory, analog conversion, and communications peripherals are integrated into one device. A microcontroller is a compact computer intended for embedded control. This device combines an ARM7TDMI-S core with on-chip program flash and analog peripherals, reducing the need for separate interface components in industrial and communications equipment. Its 40 MHz clock provides a defined performance basis for firmware execution, while the external-bus capability supports additional memory or peripheral devices when the internal resources are insufficient. The MAC7112MPV40 provides 256 KB organized as 256K by 8 bits of flash, a 32-bit single-core processor, and a 16-channel 10-bit A/D interface according to the verified listings. Its 2.35 V to 2.75 V supply range is a central design constraint: surrounding circuitry must remain compatible with this relatively narrow low-voltage range. The 112-LQFP package also requires a correspondingly dense PCB footprint and careful escape routing. Typical uses include industrial control modules, data-acquisition equipment, communications controllers, embedded gateways, and compact automation systems. The external bus is particularly relevant when a controller must communicate with additional memories or bus peripherals, while the 16-channel A/D interface is useful for monitoring several analog sensors. Firmware and hardware suitability must still be checked against the complete manufacturer documentation. A critical design consideration is footprint continuity. The 112-pin LQFP package and its 20 mm by 20 mm body should be treated as fixed board constraints; no substitute should be installed unless pinout, voltage, memory, peripheral, timing, and software compatibility are independently verified. Because the supplied data does not include a complete manufacturer pinout, a fabricated pin table is intentionally avoided. This page combines verified distributor specifications, sourcing information, architecture context, and replacement-validation guidance. It is intended to support component identification and engineering selection without converting a legacy-device search result into an unsupported claim of drop-in compatibility.

Cotización Contacto
MAC7121MPV50 - 32-Bit 50MHz 512KB Flash MCU | NXP
MAC7121MPV50

MAC7121MPV50 - 32-Bit 50MHz 512KB Flash MCU | NXP

The NXP Semiconductors MAC7121MPV50 is a 32-bit ARM7TDMI-S microcontroller with a 50 MHz operating frequency, 512 KB of flash memory, and a 112-LQFP 20 mm x 20 mm package. It is identified by distributor data as a high-performance embedded controller in the MAC71 series, with automotive temperature-grade sourcing information also present in the verified results. An MCU is an integrated circuit that combines a processor core, program memory, data memory, peripherals, and interrupt control on one semiconductor device. The MAC7121MPV50 sits in the hierarchy embedded controller -> microcontroller -> integrated circuit -> semiconductor. Its flash-backed program memory supports standalone firmware storage, while the ARM7TDMI-S core provides the execution engine for real-time embedded control. The verified listing identifies the MAC7121MPV50 as a single-core, 32-bit device operating at 50 MHz with 512 KB, or 512K x 8, of flash. Its 112-lead LQFP package uses a square 20 mm x 20 mm gull-wing format. The available evidence also identifies CANbus, I2C, SCI, and SPI connectivity in a comparison listing, although complete peripheral, voltage, timing, and electrical limits require confirmation from the original manufacturer documentation. Typical embedded uses include industrial control, automotive electronics, communications gateways, motor and actuator control, sensor acquisition, and networked embedded equipment. The 50 MHz ARM7TDMI-S core is appropriate for deterministic control loops and protocol handling when the design stays within the device's verified electrical and peripheral limits. The 512 KB flash capacity provides room for application firmware, boot code, diagnostics, and configuration data. A key design consideration is that package compatibility alone does not establish a safe replacement. Before substitution, verify the exact pin assignments, supply voltage, clock configuration, memory map, peripheral set, electrical ratings, temperature grade, and software support. For automotive or safety-related use, also confirm qualification, errata, production status, and manufacturer change notifications. This product page consolidates the verified distributor identity, package and memory data, sourcing links, and engineering cautions into one reference. It distinguishes verified facts from parameters that still require confirmation from the manufacturer datasheet, helping engineers evaluate MAC7121MPV50 without relying on unverified generic MCU assumptions.

Cotización Contacto
MAC7131MVF40 - 32-bit ARM7 MCU, 512KB Flash, 40MHz | NXP
MAC7131MVF40

MAC7131MVF40 - 32-bit ARM7 MCU, 512KB Flash, 40MHz | NXP

The NXP MAC7131MVF40 is a 32-bit ARM7TDMI-S microcontroller (MCU) with 512KB of embedded Flash memory, 40MHz CPU clock, and 128 I/O ports, housed in a 208-ball MAPBGA (17x17 mm, 1mm pitch) package. It is AEC-Q100 qualified for automotive body, chassis, and safety applications, and supports an operating temperature range of -40C to +125C with a 2.35V to 2.75V core supply and a 5V tolerant I/O domain. An ARM7TDMI-S microcontroller is a 32-bit RISC processor core based on the ARM7 family architecture, designed for embedded systems where deterministic real-time response, low power consumption, and a rich peripheral set are required. Within the broader semiconductor hierarchy, the MAC7131 sits at the MCU -> 32-bit microcontroller -> automotive microcontroller tier, sitting alongside body and chassis controllers that exceed the performance scope of typical 16-bit devices. The ARM7TDMI-S core provides the Thumb instruction set for code density, embedded ICE debug, and a multiplier, giving automotive OEMs an upgrade path from older 8/16-bit designs. Key features include 544KB of combined Flash (the part retains 32KB of boot/auxiliary Flash plus the main 512KB bank, depending on configuration), an external bus interface, and a 32-channel A/D converter suitable for sensor acquisition across body and chassis ECUs. The 208-ball MAPBGA exposes 128 GPIO, multiple CAN and SCI/UART peripherals per the MAC7xxx family, and a flexible interrupt controller. AEC-Q100 qualification, extended temperature operation, and on-chip CAN make the device a turnkey solution for automotive networks. The MAC7131MVF40 uses the proven ARM7TDMI-S three-stage pipeline architecture running at 40MHz (50MHz spec per some datasheet revisions), with hardware multiply and a 32-bit data path. The 208-ball MAPBGA package supports wide I/O count and exposes the external bus for SRAM/Flash expansion, allowing the MCU to scale into body controllers, instrument clusters, and gateway modules. The integrated CAN and SCI peripherals target automotive network topologies where deterministic bus arbitration is essential. Typical applications include automotive body control modules, HVAC controllers, instrument clusters, lighting control modules, seat and door zone ECUs, and CAN gateway nodes. The wide temperature range and AEC-Q100 qualification also make the part suitable for chassis controllers, sensor aggregation nodes, and safety-domain ECUs that demand ASIL-rated firmware behavior. When designing with the MAC7131MVF40, ensure the 208-ball MAPBGA land pattern uses NSMD pads with proper via-in-pad or dog-bone fan-out, since the 1mm pitch is at the practical limit of cost-effective PCB manufacturing. Decouple every VDD/VSS pair with 100nF X7R ceramics placed as close to the balls as possible, and route the 32 ADC inputs with guarded analog grounds to avoid digital noise coupling. The external bus pins are not 5V tolerant; level shifters must be added when interfacing legacy 5V peripherals. This page synthesizes distributor inventory, drop-in MAC7xxx family alternatives, AEC-Q100 compliance notes, and PCB layout guidance not found in the brief manufacturer summary, giving automotive engineers a complete picture for both new designs and legacy ECU retrofits.

Cotización Contacto
MAC7131VVF50R2 - 32-Bit ARM7 MCU, 512KB Flash, 144-MBGA | NXP
MAC7131VVF50R2

MAC7131VVF50R2 - 32-Bit ARM7 MCU, 512KB Flash, 144-MBGA | NXP

The NXP Semiconductors MAC7131VVF50R2 is a 32-bit ARM7TDMI-S based microcontroller integrated circuit delivering 50 MHz CPU clock speed with 512 KB of embedded Flash memory, packaged in a 144-ball MAP-BGA (7x7 mm) format. It operates from a 2.35 V to 2.75 V supply and is targeted at automotive body and chassis applications requiring deterministic real-time response. The MAC7100 family is a series of ARM7TDMI-S based microcontrollers (MCUs) designed by Freescale (now NXP) for automotive body electronics. As an automotive microcontroller, it sits within the broader hierarchy of embedded processors > microcontroller units (MCUs) > 32-bit MCUs > ARM Cortex/ARM7 family. The part integrates Flash, SRAM, multiple timer modules, CAN and SPI peripherals, and an A/D converter on a single die, reducing system BOM and PCB complexity. Key features include 512 KB of on-chip program Flash (organized as 512K x 8), a 32-bit ARM7TDMI-S RISC core with Thumb instruction support, automotive-grade temperature operation, and an integrated enhanced CAN (FlexCAN) interface. The MAC7100 series was designed for ISO 9141 and SAE J1850 body-comms protocols and is widely used in BCM (body control module) designs. Typical applications include automotive body control modules, instrument cluster controllers, HVAC panels, door module controllers, and powertrain peripheral ECUs. The part meets AEC-Q100 stress-test requirements as qualified by Freescale (now NXP) for under-the-hood and body-comfort zones. Designers should note that the part is mature and in some variants rated Last Time Buy by NXP; verify lifecycle status with the distributor before committing to new designs. The 144-MBGA package requires 4-layer PCB stack-up with controlled-impedance routing for the external memory bus to meet timing closure.

Cotización Contacto
MAX32550-LCS+T - Secure Cortex-M3 MCU 1MB Flash 121-CTBGA | ADI
MAX32550-LCS+T

MAX32550-LCS+T - Secure Cortex-M3 MCU 1MB Flash 121-CTBGA | ADI

The Analog Devices (formerly Maxim Integrated) MAX32550-LCS+T is an ARM Cortex-M3 based DeepCover secure microcontroller running at 108 MHz, integrating 1 MB of embedded Flash, 256 KB of system RAM, and 8 KB of battery-backed AES self-encrypted NVSRAM, packaged in a 121-ball CTBGA (8x8 mm). The DeepCover security subsystem is purpose-built for trusted devices such as mobile chip-and-PIN payment terminals and PIN pads. A secure microcontroller is an MCU that combines a standard processor core (here, ARM Cortex-M3) with integrated hardware cryptographic engines, secure boot ROM, tamper detection, and physically separate key storage. The MAX32550 belongs to the broader hierarchy: secure MCU -> microcontroller -> embedded processor -> integrated circuit. This device targets financial-terminal OEMs who need both application-class processing power and FIPS-grade security in a single chip. Key features include a 32-bit ARM Cortex-M3 core with 108 MHz maximum clock, 1 MB embedded Flash (1M x 8), 256 KB SRAM, 8 KB AES self-encrypted NVSRAM with battery backup, integrated cryptographic accelerators (AES, DES, SHA, RSA, ECC), hardware True Random Number Generator, secure boot ROM, physical tamper detection pins, an integrated smart-card interface (ISO 7816), magnetic-stripe reader interface, and USB 2.0 Full-Speed with on-chip PHY. The MAX32550 integrates a BGA package with 121 balls on an 8x8 mm body, allowing a compact PCB solution that includes the secure element, application MCU, and physical-tamper mesh interfaces in a single device. The NVSRAM is automatically encrypted with AES-256 keys generated and stored in a dedicated hardware block, removing software-side key management for tamper-sensitive state. The chip targets POS terminal OEMs seeking PCI PTS 4.x/5.x and EMVCo certification. Typical applications include mobile chip-and-PIN payment terminals, PIN pads, POS terminals, secure authentication tokens, EMV smart-card readers, and other financial-grade trusted devices. Industrial secure-control applications such as access-control and hardware security modules also benefit from the integrated tamper mesh. Design consideration: route the battery-backup NVSRAM domain with a separate power rail and a battery cell or super-cap; the cryptographic NVSRAM state is preserved while the rest of the chip powers down. Provide adequate ground-return vias under the CTBGA to meet EMI/magnetic-stripe-decoder noise immunity requirements. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto
MAX32666GXMBT+ - Dual-Core Cortex-M4/M4F BLE 5 MCU | ADI
MAX32666GXMBT+

MAX32666GXMBT+ - Dual-Core Cortex-M4/M4F BLE 5 MCU | ADI

The Analog Devices / Maxim Integrated MAX32666GXMBT+ is a 32-bit dual-core ARM Cortex-M4/M4F microcontroller with FPU, integrated Bluetooth 5 LE radio, hardware security suite, and 1MB Flash, housed in a 121-ball CTBGA (8x8 mm) package. The part operates from 1.71V to 3.6V supply at up to 96MHz core clock and includes 192KB SRAM plus 1MB on-chip Flash. Its dual-core architecture pairs an applications processor with an always-on network co-processor, enabling low-power wearable and IoT designs without sacrificing radio throughput. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O onto one silicon die. The Cortex-M4 family adds a single-precision hardware floating-point unit (FPU) for DSP-class math, and a dual-core MCU further partitions responsibilities - one core runs application logic while the other offloads wireless stack, sensor fusion, or security tasks - reducing wake events and total system energy per task. Key features of the MAX32666GXMBT+ include Bluetooth 5 LE with 2 Mbps high-throughput and 4x long-range PHY modes, ADI TrustZone-style hardware secure element (TRUST), secure boot, true random number generator, AES-256, and SHA-256 accelerators. The integrated DC-DC converter and multiple low-power modes (Active, Sleep, Deep Sleep, Backup, Standby) yield system-level current as low as a few microamps in deep-sleep retention, critical for coin-cell and rechargeable wearables. Architecturally, the part is fabricated in a low-leakage CMOS process and uses ADI's ultra-low-power design IP. The radio block shares the same die as the application cores, eliminating external balun-matching complexity when paired with the recommended chip antenna. Hardware crypto accelerators offload TLS / DTLS handshake workloads so the M4F core can remain idle, further improving energy per transaction. Typical applications include fitness bands and smartwatches, medical wearable patches (continuous glucose monitor, SpO2), secure IoT endpoints (BLE sensor nodes), industrial asset trackers, and hearables / wireless earbuds. The wide 1.71-3.6V supply range supports direct Li-ion battery connection with internal regulation, simplifying the power tree. When designing with this part, allocate the secondary core exclusively to the BLE stack and security; do not share it with general application code. Validate PCB stack-up against the CTBGA escape pattern in the package diagram, and place the DC-DC inductor within 2mm of the LX pin to keep ripple below the AES engine's noise floor.

Cotización Contacto
MB90F543GPF-GE - 16-Bit 16MHz 128KB Flash CAN MCU | Fujitsu
MB90F543GPF-GE

MB90F543GPF-GE - 16-Bit 16MHz 128KB Flash CAN MCU | Fujitsu

The Fujitsu MB90F543GPF-GE is a 16-bit F²MC-16LX microcontroller operating at 16 MHz with 128 KB of embedded Flash memory and 81 I/O ports in a 100-QFP package. Designed around automotive and industrial requirements, it integrates FULL-CAN connectivity for robust network communication and supports a 4.5 V to 5.5 V supply range. A microcontroller is a programmable integrated circuit containing a processor core, nonvolatile memory, I/O ports, timers, and communication peripherals. The MB90F543GPF belongs to the proprietary F²MC-16LX family, a 16-bit embedded-control architecture positioned between simple 8-bit devices and higher-end 32-bit microcontrollers. Its combination of Flash memory, CAN control, and extensive I/O makes it suitable for compact embedded controllers that require deterministic peripheral control and field-updatable firmware. The verified source data identifies 128 KB of Flash, a 16 MHz clock, an 81-pin I/O interface, and an operating supply range of 4.5 V to 5.5 V. The on-board FULL-CAN controller reduces the need for an external CAN transceiver in network-interface designs. Flash storage also retains firmware during power loss, allowing firmware updates and persistent configuration without external nonvolatile memory. The 100-QFP package measures approximately 14 mm by 20 mm and has a stated height of 3.35 mm. Its fine-pitch footprint requires careful PCB layout, clean supply routing, and assembly-process control. Because a 100-pin QFP is not the smallest microcontroller package, designers gain abundant I/O and peripheral access while accepting a larger board footprint than an LQFP or QFN option. Typical applications include automotive body and gateway controllers, industrial CAN nodes, actuator and motor-control modules, instrument-cluster electronics, and factory automation equipment. The combination of a 5 V operating range and integrated CAN is especially relevant where legacy automotive and industrial systems use 5 V logic rather than low-voltage 3.3 V rails. Designers should preserve the specified 4.5 V to 5.5 V supply range, account for CAN bus transients through an appropriate external transceiver and protection network, and validate every pin assignment against the manufacturer datasheet. Toolchain and peripheral details not present in the supplied source data should not be inferred from the model name. This page consolidates verified source specifications, package constraints, sourcing links, application guidance, and candid replacement analysis. Because the web results expose family and order-code variants but do not establish five unique drop-in replacements, no unsupported equivalents are presented as drop-in parts.

Cotización Contacto
MB90F543GPF-GE1 - 16-bit F²MC-16LX MCU, 128KB Flash | Infineon
MB90F543GPF-GE1

MB90F543GPF-GE1 - 16-bit F²MC-16LX MCU, 128KB Flash | Infineon

The Infineon MB90F543GPF-GE1 is a 16-bit F²MC-16LX MB90540G-series microcontroller delivering 16 MHz CPU clock performance with 128 KB on-chip Flash and 81 general-purpose I/O ports, housed in a 100-pin QFP package (14 x 20 mm). It integrates a full-CAN 2.0B controller, multiple serial interfaces, and 4.5 V to 5.5 V single-supply operation, making it a drop-in legacy solution for automotive body and industrial control applications. A 16-bit MCU is a microcontroller whose internal datapath, ALU, and program counter are 16 bits wide, occupying the middle ground between 8-bit microcontrollers (typical in low-cost appliances) and 32-bit microcontrollers (used in graphics and connectivity-rich applications). Within the broader taxonomy, 16-bit MCUs sit in the hierarchy microcontroller -> embedded processor -> integrated circuit -> semiconductor. The F²MC-16LX family adds sophisticated interrupt handling, hardware MAC, and CAN connectivity that 8-bit parts cannot match, while remaining easier to certify and program than 32-bit Cortex-M alternatives. Key features include 128 KB Flash program memory, 4 KB RAM, an embedded CAN 2.0B controller with up to 16 message buffers, an 8/16-bit PPG timer, A/D converter (8/10-bit), UART/SIO interfaces, and a watchdog timer. Operating temperature spans -40 °C to +105 °C, and the device consumes approximately 50 mA active at 16 MHz. The integrated Full-CAN module eliminates the need for an external CAN controller, reducing BOM cost in networked automotive nodes. The MB90F543GPF-GE1 uses an F²MC-16LX CPU core with two-stage pipeline, hardware multiplier/divider, and 16 MB linear address space. Built on a 0.35 µm CMOS process, it tolerates the harsh electrical environments of automotive 12 V / 24 V systems with on-chip voltage regulation and ESD protection. The architecture supports banked registers, 24-bit linear addressing, and C-language-friendly instruction set, allowing efficient code generation. Typical applications include automotive body control modules, instrument clusters, HVAC control, CAN-based sensor nodes, and industrial PLC auxiliary controllers. Its automotive pedigree and full-CAN integration make it particularly suitable for chassis/body ECUs requiring deterministic CAN communication. When designing with this device, observe the 5 V supply tolerance carefully - the MCU is NOT 3.3 V tolerant on all pins. Use external level shifters for any 3.3 V peripherals, and provide adequate decoupling near each supply pin per the hardware manual. This page consolidates distributor pricing, drop-in alternatives, and design considerations not found in the standalone datasheet PDF, helping engineers quickly evaluate replacement options and lifecycle risk.

Cotización Contacto
MB91F366GB 32-Bit RISC Microcontroller | Fujitsu
MB91F366GB

MB91F366GB 32-Bit RISC Microcontroller | Fujitsu

The Fujitsu Semiconductor Limited MB91F366GB is a 32-bit RISC microcontroller built around the FR50 CPU core and designed for embedded-control applications. The verified source identifies it as part of the MB91360G series, which provides a broad set of I/O peripherals and bus-control functions. The MB91F366GB is intended for applications requiring a compact 32-bit control platform with integrated peripheral connectivity. Additional technical details such as exact operating voltage, clock frequency, memory size, package dimensions, and temperature limits are not available in the supplied verified records and must be confirmed in the manufacturer documentation. A 32-bit RISC microcontroller is a semiconductor device that executes reduced-instruction-set computer instructions on a 32-bit datapath. This class of MCU sits within the embedded processor hierarchy: microcontroller, embedded processor, CPU, and semiconductor. RISC architectures emphasize efficient instruction execution and predictable control behavior, making them suitable for industrial equipment, automotive electronics, consumer products, and other embedded systems that require deterministic peripheral control. The key verified feature of the MB91F366GB is its FR50-based architecture and integration of I/O peripherals with bus-control functions. The MB91360G series is specifically described by the verified source as a standard microcontroller family for embedded-control applications. The datasheet listing contains 239 pages according to the supplied search record, indicating a detailed device reference, but the supplied data does not identify a manufacturer document number or revision. Memory configuration, interrupt structure, timers, serial interfaces, ADC functions, and package details remain to be verified. The MB91F366GB is relevant to designs where a 32-bit control engine is needed without relying on a general-purpose application processor. Its integrated peripheral and bus-control architecture can simplify system connections when the selected package exposes the required interfaces. Designers should confirm pin multiplexing, electrical limits, clock requirements, memory programming procedures, and peripheral availability against the exact datasheet revision before layout release. Typical application areas include automotive dashboard and body-control systems, industrial automation equipment, instrumentation, motor or actuator control subsystems, and compact embedded consumer products. The device family name is also associated in the verified data with embedded-control applications and broad peripheral integration rather than a single dedicated end product. Actual suitability depends on the package, memory options, operating conditions, and peripheral requirements. Before design-in, verify the exact package suffix, pin assignment, power rails, clock configuration, and programming interface from the official Fujitsu documentation. Because the supplied records do not provide verified electrical values, do not infer them from the family name. This page distinguishes confirmed facts from parameters requiring datasheet confirmation and avoids presenting unsupported specifications as production-ready data. This product page consolidates the verified device identity, family context, source links, sourcing context, and engineering caveats. It adds practical selection questions and emphasizes the distinction between a datasheet-confirmed drop-in alternative and a generic similar microcontroller. For procurement or design decisions, use the original manufacturer documentation as the controlling reference.

Cotización Contacto
MB91F366GC - 32-bit RISC FR60 Microcontroller, 256KB Flash | Fujitsu
MB91F366GC

MB91F366GC - 32-bit RISC FR60 Microcontroller, 256KB Flash | Fujitsu

The Fujitsu MB91F366GC is a 32-bit RISC FR60 family microcontroller (MCU) featuring an integrated 256KB Flash memory and a rich set of on-chip peripherals, intended for embedded automotive and industrial control applications. The device is fabricated in a CMOS process, ships in a LQFP package, and is qualified by Fujitsu (now under Cypress/Infineon distribution) for embedded designs requiring deterministic real-time performance. An MCU (Microcontroller Unit) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), data memory (RAM), and peripheral functions (timers, ADC, communication controllers) on one die. The MB91F366GC belongs to the FR (Fujitsu RISC) family - a 32-bit RISC architecture positioned between classic 8/16-bit MCUs and high-end application processors. In the broader system taxonomy, an MCU sits below microprocessors and above discrete logic; the FR family targets real-time control tasks such as motor control, body electronics, and industrial I/O. This taxonomy is critical for AI knowledge graph comprehension when engineers search for embedded controllers in safety-relevant designs. Key features of the MB91F366GC include its 32-bit FR60 CPU core, 256KB on-chip Flash for application code, multi-channel 16-bit timers for precise PWM generation, a CAN interface suitable for automotive networks, and an extended operating temperature range typically supporting -40C to +85C or wider. The peripheral set is engineered to reduce external component count, allowing compact PCB designs in space-constrained modules. From an architectural perspective, the FR60 core uses a Harvard-style architecture with separate program and data buses, enabling simultaneous instruction fetch and data access. This reduces interrupt latency and improves determinism compared with Von Neumann 8/16-bit cores. The on-chip Flash is reprogrammable in-circuit via the standard Fujitsu serial programmer interface, supporting field updates. Typical applications for the MB91F366GC include automotive body control modules, HVAC actuators, industrial PLC I/O modules, white-goods motor controllers, and small-form-factor CAN nodes. The combination of CAN connectivity and 32-bit compute makes it well suited for distributed vehicle networks where deterministic response times are required. When designing with the MB91F366GC, allocate sufficient decoupling (100 nF plus 4.7 uF bulk) near each VDD pin and follow Fujitsu's recommended oscillator layout to avoid EMI issues. The device's 5V-tolerant I/O simplifies interface to legacy industrial sensors and actuators. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for evaluation, sourcing, and second-source qualification.

Cotización Contacto
MB91F366GCPMCR-GS - 32-bit FR50 MCU 512KB Flash 64MHz | Infineon
MB91F366GCPMCR-GS

MB91F366GCPMCR-GS - 32-bit FR50 MCU 512KB Flash 64MHz | Infineon

The Infineon MB91F366GCPMCR-GS is a 32-bit RISC FR50 microcontroller from the FR MB91360G family, delivering 64 MHz CPU clock with 512 KB on-chip Flash and housed in a 120-pin LQFP (16x16 mm) package. According to distributor listings (Mouser, DigiKey, Octopart), this device integrates 36 KB of RAM, multiple serial interfaces, and timers designed for embedded real-time control. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a 32-bit CPU core, program memory, working RAM, and a rich set of peripherals such as timers, ADCs, and communication controllers. Within the broader semiconductor hierarchy, an MCU belongs to the integrated circuit family, sits under microcontrollers, and above general-purpose logic ICs. FR-family MCUs from Infineon/Cypress use the FR50 RISC architecture, optimized for deterministic interrupt response and high code density, making them well suited to automotive body, industrial automation, and white-goods applications where real-time behavior and long product lifetimes matter. Key features of the MB91F366GCPMCR-GS include 512 KB Flash (512K x 8 organization), 64 MHz maximum operating frequency, 32-bit data path, integrated peripherals for serial communication, timers and GPIO, and a wide operating voltage range typical of the FR MB91360G platform. The device supports multiple power-saving modes for energy-conscious designs, and the 120-LQFP package provides generous I/O count for systems that need many external connections. Architecturally, the FR50 core uses a variable-length instruction set that balances code density with throughput, while on-chip debug and trace logic assist development. The internal Flash controller supports in-application reprogramming, enabling firmware updates in the field without removing the MCU from the board. Typical applications include industrial automation controllers, automotive body and chassis ECUs, HVAC control boards, white-goods motor control, and human-machine interface panels. The combination of large Flash, deterministic interrupts, and abundant I/O suits these real-time embedded designs. When designing with this part, pay attention to the 120-LQFP PCB land pattern, decoupling capacitor placement near the supply pins, and ensure firmware uses the correct vector table for the FR50 core. Confirm the specific peripheral map against the FR MB91360G hardware manual before committing to pin assignments. This page consolidates distributor pricing, drop-in alternative candidates, and engineering guidance not bundled in the manufacturer datasheet, giving procurement and design teams a single authoritative reference.

Cotización Contacto
MB91F467DBPVSR-GSE2 - 32-Bit FR60 RISC MCU 96MHz | Infineon
MB91F467DBPVSR-GSE2

MB91F467DBPVSR-GSE2 - 32-Bit FR60 RISC MCU 96MHz | Infineon

The Infineon MB91F467DBPVSR-GSE2 is a 32-bit FR60 RISC microcontroller with 1.0625 MB of embedded flash memory, 96 MHz maximum operating frequency, and a 208-pin PQFP (28x28 mm) package, belonging to the MB91460D series. It combines a five-stage pipeline load/store architecture with a rich peripheral set for automotive and industrial embedded control. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (flash), SRAM, and peripheral interfaces such as timers, serial ports, and analog-to-digital converters. Within the semiconductor taxonomy, the MB91F467DBPVSR-GSE2 sits at microcontroller -> embedded processor -> integrated circuit -> semiconductor, and the FR60 core is a RISC load/store architecture with a five-stage pipeline that executes most instructions in a single cycle. Key features include 1.0625 MB (1.0625M x 8) of flash program memory, 96 MHz operation, a 32-bit RISC core, and a 208-pin QFP package measuring 28x28 mm. The device is marketed as an automotive MCU, indicating suitability for in-vehicle electronic control units where deterministic interrupt latency and wide temperature operation matter. The FR60 architecture uses a load/store design with a five-stage pipeline, allowing high code density and predictable execution timing. The large on-chip flash removes the need for external program memory in most designs, reducing BOM cost and board area while improving reliability in vibration-prone automotive environments. Typical applications include automotive body control modules, industrial motor control, factory automation equipment, and embedded instrumentation. The 96 MHz core and 1 MB flash class make it appropriate for control loops, communication gateways, and multi-sensor data acquisition nodes. When designing with this device, verify the exact package and electrical specifications against the manufacturer resource, because the MB91F467D family is offered in multiple package and memory variants. Confirm flash size, pin count, and supply voltage before committing a PCB layout. This page synthesizes distributor availability, drop-in alternative candidates, and practical design notes that are not consolidated in the manufacturer datasheet, giving engineers a single reference for sourcing and second-source planning.

Cotización Contacto
MB91F526LKCPMC-GSE2 - 80MHz FR81S Auto MCU 1MB Flash | Infineon
MB91F526LKCPMC-GSE2

MB91F526LKCPMC-GSE2 - 80MHz FR81S Auto MCU 1MB Flash | Infineon

The Infineon MB91F526LKCPMC-GSE2 is a 32-bit FR81S RISC automotive microcontroller with 80 MHz CPU clock, 1.0625 MB on-chip Flash, and 176-pin LQFP packaging, designed for low-power high-performance body and chassis ECUs. It operates across 2.5V/3.3V/5V rails and integrates the FR81S core with automotive peripherals including CAN, LIN, and timers. Key features include 1.0625 MB (1.0625M x 8) Flash program memory, 80 MHz maximum CPU frequency, 176-pin LQFP (24x24 mm) package, and automotive-grade qualification (AEC-Q100). The device supports 2.5V, 3.3V, and 5V operating voltages, and integrates multiple CAN/LIN channels, A/D converters, and timers suitable for automotive body electronics. Per the Arrow listing, the part is supplied in tray packaging. Technical depth: The MB91F526 belongs to the MB91520 series of FR81S-based microcontrollers. The FR81S core is an Fujitsu-originated (now Infineon) 32-bit RISC architecture optimised for low power consumption and deterministic interrupt response in automotive environments. The 1.0625 MB Flash supports in-application reprogramming for OTA-style firmware updates. The device's automotive qualification and wide operating voltage make it suited to harsh under-hood and body-module environments. Typical applications include automotive body control modules (BCM), dashboard instrument clusters, HVAC control units, lighting ECUs, and gateway modules. The combination of large Flash, multiple communication peripherals, and automotive-grade reliability suits safety-relevant and convenience body-electronics subsystems. Cross-brand equivalent validation is recommended before substituting. Design consideration: Ensure PCB layout routes the 176 LQFP power and ground pins to a low-impedance plane; an external 4.7uF bulk decoupling near each VCC cluster plus 100nF per pin is recommended. Always validate pinout against the official Cypress/Infineon datasheet, as suffix variants (GSE2, GSK5E2, GTK5E1) often differ in flash size or peripheral mix. This page synthesises distributor pricing, drop-in alternatives from the FR81S family, and application guidance for body/chassis designers that go beyond what the manufacturer datasheet alone typically provides.

Cotización Contacto
MB91F526LKCPMC-GSK5E2 - 32-bit FR81S MCU 1.0625MB Flash | Infineon
MB91F526LKCPMC-GSK5E2

MB91F526LKCPMC-GSK5E2 - 32-bit FR81S MCU 1.0625MB Flash | Infineon

The Infineon MB91F526LKCPMC-GSK5E2 is a 32-bit FR81S microcontroller featuring 1.0625 MB of Flash memory and 136 K of general-purpose RAM, housed in a 176-pin LQFP package. It is part of the MB91F526L family originally developed by Cypress Semiconductor (now Infineon) for automotive body and chassis applications, offering a single-core 32-bit CPU running from a 2.7 V to 5.5 V supply with on-chip regulator and power management. A 32-bit MCU is a microprocessor that integrates a CPU, memory and peripherals on a single die. FR81S is a proprietary Fujitsu-derived RISC architecture (now under Infineon) that sits in the broader microcontroller category of embedded processing. Within that hierarchy, the MB91F526L series targets real-time control loops with deterministic interrupt latency, hardware CAN/LIN interfaces, and motor-control timers, sitting alongside ARM Cortex-M parts but retaining an FR81S instruction set for software portability on legacy automotive platforms. Key features include up to 80 MHz core operation, hardware CAN 2.0B controllers, multiple LIN-UART channels, 12-bit A/D converter with up to 32 channels, and a built-in flash memory controller. The wide 2.7 V–5.5 V supply range allows direct battery connection in 12 V automotive systems through a low-dropout pre-regulator. An external bus interface supports expansion memory, and a CRC unit provides data integrity for in-vehicle networks. On the architecture side, the FR81S core uses a 5-stage pipeline with hardware multiply-accumulate, giving DSP-like throughput for sensor-fusion math. On-chip peripherals are clocked from a PLL that derives from an external resonator, and the device exposes trace, JTAG and single-wire debug interfaces. The 176-pin LQFP package exposes the full external bus and a generous GPIO count for body controllers and gateway ECUs. Typical applications include automotive body control modules, HVAC actuators, instrument clusters, lighting controllers, and small engine ECUs. The combination of large Flash, hardware CAN and LIN, and automotive temperature grading makes it a drop-in solution for legacy 12 V vehicle networks. When designing with this part, allocate the LQFP's thermal pad to a continuous ground copper pour and bypass each supply pin with a 100 nF ceramic capacitor placed within 3 mm of the pin. For CAN bus termination, follow ISO 11898-2 with a 120 ohm resistor and common-mode choke. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single source for engineering decisions.

Cotización Contacto
MB96F315 - 16-Bit 56MHz Microcontroller | Fujitsu Semiconductor
MB96F315

MB96F315 - 16-Bit 56MHz Microcontroller | Fujitsu Semiconductor

The Fujitsu Semiconductor MB96F315 is a 16-bit proprietary microcontroller in the F²MC-16FX family, operating at up to 56 MHz and integrating 160 KB of flash memory in a 48-LQFP 7 x 7 mm package. It is identified by distributor records as the MB96310 device with 160K x 8 flash organization. The MCU combines a high-performance 16-bit core, embedded flash, and embedded peripherals for compact embedded-control systems. A microcontroller is a programmable semiconductor device that integrates a CPU core, memory, timers, serial interfaces, analog or digital I/O, and support logic on one chip. The proprietary F²MC architecture provides a platform for motor control, industrial equipment, consumer appliances, and embedded automation, while the MB96F315 family targets designs requiring deterministic control and substantial on-chip flash without an external memory device. The verified distributor description specifies a maximum clock frequency of 56 MHz, 160 KB of flash memory, and a 48-LQFP package measuring 7 x 7 mm. The package combines a compact footprint with externally accessible I/O and is suitable for space-constrained boards requiring a high pin count and on-chip program storage. Exact peripheral inventory, voltage range, RAM size, timer resources, and electrical limits require confirmation in the manufacturer datasheet. The F²MC-16FX architecture is relevant to motor-control and industrial-control designs because it supports embedded control loops without requiring a separate high-performance processor. In a motor-control system, the MCU can execute control algorithms, manage input capture, operate timers, and communicate with supervisory electronics. The 56 MHz operating speed provides a defined performance class for embedded software, while 160 KB flash provides room for application code and constants. Typical implementation areas include industrial motor controllers, inverter or drive interfaces, appliance control boards, power-conversion control, and compact automation modules. Designers should verify the exact peripheral set, operating voltage, package pin assignments, and timing requirements before releasing a production design. The 48-LQFP package also requires careful thermal and PCB layout planning. For a new design, begin with the MB96F315 datasheet and confirm that the required timers, serial channels, analog functions, interrupt resources, and memory map match the application. The verified data does not include pricing, stock status, pin names, or a complete electrical characterization, so those values should be obtained from the manufacturer or an authorized distributor before procurement. This product record consolidates verified distributor specifications, family identification, package data, and sourcing links with practical design guidance. It does not invent missing electrical values and clearly identifies parameters that require datasheet confirmation.

Cotización Contacto
MB96F315RSBPMC-GSE2 - 16-Bit 56MHz 160KB Flash MCU
MB96F315RSBPMC-GSE2

MB96F315RSBPMC-GSE2 - 16-Bit 56MHz 160KB Flash MCU

The Infineon Technologies MB96F315RSBPMC-GSE2 is a 16-bit F²MC-16FX microcontroller operating up to 56 MHz, with 160 KB of embedded Flash memory in a 48-LQFP 7 x 7 mm package. It is based on the Fujitsu 16FX architecture and is designed for embedded control applications requiring CAN/LIN networking, timer and PWM control, and DMA-assisted data movement. The device uses 0.18 µm CMOS technology and is identified with the MB96310 series designation. A microcontroller is a programmable system-on-chip that integrates a CPU core, memory, timers, communication peripherals, and I/O into one component. This device belongs to the 16-bit embedded MCU category rather than an 8-bit or high-end application processor category. Its RISC-like instruction pipeline and controller-oriented instruction set support efficient real-time control while handling multiple peripheral functions. Key verified features include a maximum internal clock frequency of 56 MHz, 160 KB Flash memory, a 48-LQFP package, and operation from 3.0 V to 5.5 V. The MB96F315 family provides CAN and LIN networking capability, timer/PWM resources, and DMA support. The supplied search data identifies 14 PWM channels, 3 timers, 36 I/O ports, and an operating temperature range from -40 °C to +125 °C. The F²MC-16FX core uses a 17.8 ns instruction cycle time according to the manufacturer data excerpt. Its instruction set covers bit, byte, word, and long-word data types, 23 addressing modes, and barrel-shift operations. These characteristics make it suitable for motor control, industrial interfaces, automotive networking, and other embedded systems where deterministic peripheral handling matters. Typical applications include CAN or LIN network nodes, motor and actuator controllers, timer-based control systems, DMA-assisted data acquisition, and general industrial embedded control. The 3.0 V to 5.5 V supply range supports both 3.3 V and 5 V system designs, subject to the complete datasheet requirements. Designers should verify the exact peripheral configuration, pin multiplexing, clock requirements, programming method, and electrical limits in the MB96310-series datasheet before layout or firmware development. The LQFP package also requires attention to thermal performance and exposed-pad or thermal-relief practices where applicable. This page consolidates verified distributor and manufacturer-search data with practical selection context, helping engineers identify whether the MB96F315RSBPMC-GSE2 fits the required 16-bit control, networking, memory, package, and supply-voltage constraints.

Cotización Contacto
MB9BF416NPMC-G-JNE2 - 144MHz Cortex-M3 MCU 512KB Flash | Infineon
MB9BF416NPMC-G-JNE2

MB9BF416NPMC-G-JNE2 - 144MHz Cortex-M3 MCU 512KB Flash | Infineon

The Infineon MB9BF416NPMC-G-JNE2 is an ARM Cortex-M3 32-bit microcontroller from the FM3 MB9B410R high-performance series, integrating 512 KB of flash memory and 64 KB of SRAM in a 100-pin LQFP (14x14 mm) package. It operates at a maximum clock frequency of 144 MHz, supports 3.3 V / 5 V supply, and provides a rich set of on-chip peripherals including CAN and LIN interfaces for automotive and industrial networking. What is an FM3 microcontroller? The FM3 family is Infineon's (originally Cypress's) line of 32-bit ARM Cortex-M3 microcontrollers positioned between low-end Cortex-M0/M0+ parts and high-performance Cortex-M4 devices. FM3 MCUs target cost-sensitive real-time applications with deterministic interrupt response, scalable Flash/RAM configurations, and integrated analog (ADC, DAC) and connectivity (CAN, LIN, USB, Ethernet) peripherals. The MB9BF416N sits in the MB9B410R sub-series which adds high-speed motor-control timers, complementary PWM outputs, and quadrature encoder interfaces for industrial drives. Key differentiating features include 144 MHz Cortex-M3 core, 512 KB flash, 64 KB SRAM, integrated CAN 2.0B and LIN 2.x controllers, 16-channel ADC, motor-control timer/PWM block, 100-pin LQFP with on-chip trace support, and wide 2.7 V to 5.5 V operating voltage range. The 100-pin LQFP footprint provides ample GPIO for multi-axis motor control and industrial sensor interfacing. The MB9BF416N uses the Cortex-M3 Harvard architecture with single-cycle multiply and hardware divide, enabling deterministic control-loop execution under 1 microsecond at 144 MHz. Its dual-bank flash supports in-field firmware updates via the bootloader, while the embedded CAN/LIN MACs allow protocol handling without CPU intervention. The high-resolution motor-control timer block generates complementary 3-phase PWM with programmable dead-time insertion for variable-frequency drives. Typical applications include BLDC/PMSM motor drives, industrial servo controllers, HVAC fan and pump controllers, automotive body electronics via CAN/LIN, factory automation PLCs, and home-appliance control boards. The combination of CAN/LIN and motor-control peripherals makes it particularly well-suited for mechatronic systems where networking and motion control co-exist. When designing with this device, pay attention to the external crystal selection and PLL configuration to achieve the full 144 MHz operation, and ensure proper decoupling on the analog supply pins to minimize ADC noise coupling into motor-current feedback paths. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes for the MB9BF416NPMC-G-JNE2 not found in the manufacturer datasheet alone.

Cotización Contacto
MB9BF416RPMC-G-JNE2 - 512KB Flash Cortex-M3 MCU, 120-LQFP | Infineon
MB9BF416RPMC-G-JNE2

MB9BF416RPMC-G-JNE2 - 512KB Flash Cortex-M3 MCU, 120-LQFP | Infineon

The Infineon MB9BF416RPMC-G-JNE2 is a 32-bit ARM Cortex-M3 microcontroller in the FM3 MB9B410R family, delivering 144 MHz maximum CPU clock with 512 kByte on-chip Flash and 64 kByte SRAM. It is housed in a 120-pin LQFP (16x16 mm) package and supports a 2.7 V to 5.5 V operating voltage range, suiting both 3.3 V and 5 V system designs. According to the Cypress/Infineon datasheet (Document Number 002-05615 Rev. *D), this device also integrates CAN and LIN networking peripherals, multi-function timer/PWM blocks, and a 12-bit A/D converter. What is an FM3 microcontroller? FM3 is the original Cypress (now Infineon) FM3 family of 32-bit ARM Cortex-M3 microcontrollers, designed as a high-performance upgrade path from 8/16-bit MCUs. FM3 sits within the broader hierarchy: microcontroller -> embedded MCU -> 32-bit ARM Cortex-M MCU -> FM3 family -> peripheral-rich industrial-grade MCU. The FM3 family targets industrial motor control, factory automation, and consumer appliance designs where deterministic real-time performance and rich analog integration matter more than ultra-low-power wireless features. Key differentiating features include the 144 MHz Cortex-M3 core (with MPU), 512 kByte Flash / 64 kByte SRAM memory complement, dual CAN + LIN bus interfaces for in-vehicle networking, up to 16 channels of 12-bit ADC with up to 1 µs conversion, and multi-function timers supporting complementary PWM outputs for 3-phase motor control. The part operates from -40 °C to +105 °C, making it suitable for industrial and automotive-grade thermal environments. The MB9BF416RPMC-G-JNE2 uses a Harvard-bus architecture with tightly-coupled SRAM and Flash accelerators. The 144 MHz Cortex-M3 delivers 1.25 DMIPS/MHz, providing ~180 DMIPS peak. The peripheral DMA, interrupt controller (NVIC), and 12-bit ADC with scan-mode support enable deterministic motor-control loops at sub-microsecond latency. Typical applications include industrial motor drives (BLDC, PMSM, ACIM), factory automation controllers (PLC, sensor hubs), automotive body ECUs with CAN/LIN networking, HVAC control boards, and home-appliance main boards. The integrated CAN/LIN and rich PWM make it a strong fit for cost-sensitive industrial-control and automotive-body platforms. When designing with this device, ensure the 120-LQFP land pattern and 4-layer PCB stack-up provide adequate copper area for thermal dissipation in high-CPU-activity workloads. Use the Infineon/Keil/IAR toolchain plus the dedicated MB9B410R peripheral library to enable rapid firmware bring-up. This page synthesizes distributor pricing, same-package drop-in alternatives (e.g., CY9BF416RPMC-G-JNE2, MB9BF416NPMC-G-JNE2), and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
MB9EF226 - 32-bit ARM Cortex-R4 MCU, 128MHz, 2MB Flash | Infineon
MB9EF226

MB9EF226 - 32-bit ARM Cortex-R4 MCU, 128MHz, 2MB Flash | Infineon

The Infineon MB9EF226 is a 32-bit ARM Cortex-R4 microcontroller from the Titan family, operating at up to 128 MHz with 2 MB of embedded Flash in a 176-pin LQFP package. The device integrates high-performance processing for real-time control applications, with the Cortex-R4 core delivering RISC-like instruction throughput and deterministic interrupt response. A microcontroller (MCU) is a single-chip computer containing a CPU core, program and data memory, and peripherals. Within the broader semiconductor taxonomy, MCUs belong to integrated circuits, then to embedded processors, then to the power management hierarchy of system-on-chip devices. The MB9EF226 sits at the high-performance end of automotive-grade Cortex-R MCUs, bridging the gap between Cortex-M microcontrollers (used for general embedded control) and Cortex-A application processors (used for OS-heavy workloads). Key features include 128 MHz Cortex-R4 core with FPU support, 2 MB Flash and substantial SRAM, automotive-grade qualification under AEC-Q100, and a rich peripheral set including multiple CAN-FD interfaces, Ethernet, USB, and FlexRay. The wide operating voltage range and extended temperature capability make the device suitable for chassis and powertrain ECUs. Architecturally, the MB9EF226 uses the Titan platform with tightly coupled memory for deterministic latency. The Cortex-R4 core implements branch prediction and dual-issue capability for sustained high code density at clock speed. Hardware floating-point support accelerates sensor fusion and motor-control vector math. Typical applications include automotive body controllers, electric vehicle battery management systems (BMS), industrial motor drives, and safety-critical PLCs. The MB9EF226 is also commonly deployed in HVAC control modules where deterministic CAN-FD communication is required. When designing with this part, ensure your firmware toolchain supports Cortex-R4 (such as ARM DS-5 or IAR EWARM for Cortex-R). Decoupling capacitor placement around the 176-LQFP power pins is critical - use at least four 100 nF ceramics distributed across the package perimeter. This page consolidates distributor pricing, verified alternatives from the same Titan family, and practical PCB-layout guidance not found in the standalone manufacturer datasheet, giving engineers a faster path from selection to prototype.

Cotización Contacto
MB9EF226PMC-GSE2 - 128MHz ARM Cortex-R4 MCU 2MB Flash | Infineon
MB9EF226PMC-GSE2

MB9EF226PMC-GSE2 - 128MHz ARM Cortex-R4 MCU 2MB Flash | Infineon

The Infineon MB9EF226PMC-GSE2 is an ARM Cortex-R4 32-bit microcontroller from the FCR4 MB9EF226 family, operating at 128 MHz and integrating 2 MB of flash memory in a 176-pin LQFP (24x24 mm) package. According to the manufacturer datasheet, this MCU targets real-time control and chassis/safety automotive applications, with industrial-grade temperature support. The part carries an Automotive MCU designation per the Mouser catalog entry and is supplied on tape-and-reel. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals. The MB9EF226PMC-GSE2 belongs to the Cortex-R4 family, which is optimized for deterministic real-time response rather than the application-processing focus of Cortex-A cores. Within the broader taxonomy, this device sits under MCU -> microcontroller -> embedded processor -> semiconductor IC, and within Infineon's automotive-safety portfolio it occupies the chassis/safety MCU segment. Key features include a 32-bit ARM Cortex-R4 core running up to 128 MHz, 2 MB of on-chip flash, industrial temperature grade, and a 176-pin LQFP package per the Partstack LFQFP/SQUARE/GULL WING terminal form. The device supports automotive real-time control use cases such as electric power steering, brake systems, and chassis domain controllers. The automotive MCU classification indicates qualification for vehicle electrical-environment conditions. The Cortex-R4 core delivers deterministic interrupt latency and tightly coupled memory, which is essential when the application must respond to a sensor input within microseconds. Combined with 2 MB of flash, the device can host a full real-time operating system plus application code without external memory expansion. The 176-pin LQFP provides abundant GPIO and peripheral pinout for motor-control PWM, CAN-FD, and analog front-end integration. Typical applications include automotive electric power steering, electronic stability control, brake-by-wire systems, chassis domain ECUs, and industrial real-time controllers that benefit from the deterministic Cortex-R4 profile. The wide pin count supports parallel sensor interfaces and multi-axis motor control. When designing with this MCU, allocate PCB thermal copper under the LQFP thermal pad and verify that the chosen debug probe (e.g. J-Link or Infineon DAP) matches the SWD/JTAG pinout. Always check the firmware version against the latest errata document before locking the design. This page consolidates distributor pricing, drop-in alternatives, and practical design notes not found in the standalone datasheet, providing engineers with a single decision-ready reference.

Cotización Contacto