MB96F315RSBPMC-GSE2 - 16-Bit 56MHz 160KB Flash MCU
N.º de pieza: MB96F315RSBPMC-GSE2 ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
MB96F315RSBPMC-GSE2 Descripción general
A microcontroller is a programmable system-on-chip that integrates a CPU core, memory, timers, communication peripherals, and I/O into one component. This device belongs to the 16-bit embedded MCU category rather than an 8-bit or high-end application processor category. Its RISC-like instruction pipeline and controller-oriented instruction set support efficient real-time control while handling multiple peripheral functions.
Key verified features include a maximum internal clock frequency of 56 MHz, 160 KB Flash memory, a 48-LQFP package, and operation from 3.0 V to 5.5 V. The MB96F315 family provides CAN and LIN networking capability, timer/PWM resources, and DMA support. The supplied search data identifies 14 PWM channels, 3 timers, 36 I/O ports, and an operating temperature range from -40 °C to +125 °C.
The F²MC-16FX core uses a 17.8 ns instruction cycle time according to the manufacturer data excerpt. Its instruction set covers bit, byte, word, and long-word data types, 23 addressing modes, and barrel-shift operations. These characteristics make it suitable for motor control, industrial interfaces, automotive networking, and other embedded systems where deterministic peripheral handling matters.
Typical applications include CAN or LIN network nodes, motor and actuator controllers, timer-based control systems, DMA-assisted data acquisition, and general industrial embedded control. The 3.0 V to 5.5 V supply range supports both 3.3 V and 5 V system designs, subject to the complete datasheet requirements.
Designers should verify the exact peripheral configuration, pin multiplexing, clock requirements, programming method, and electrical limits in the MB96310-series datasheet before layout or firmware development. The LQFP package also requires attention to thermal performance and exposed-pad or thermal-relief practices where applicable.
This page consolidates verified distributor and manufacturer-search data with practical selection context, helping engineers identify whether the MB96F315RSBPMC-GSE2 fits the required 16-bit control, networking, memory, package, and supply-voltage constraints.
Alternativas directas para MB96F315RSBPMC-GSE2 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con MB96F315RSBPMC-GSE2 (mismo factor de forma y huella) — difiere en Package.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
MB96F315RSBPMC-GSE1
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
MB96F315
✅ Sustitución directa✓ En stock
Consulte el precio
Ver hoja de datos →MB96F315RSBPMC-GSE2 Valores máximos y características eléctricas
| Architecture | F²MC-16FX 16-bit proprietary microcontroller |
| Series | MB96310 series |
| Maximum internal clock frequency | 56 MHz |
| Flash memory | 160 KB |
| Tensión de alimentación | 3.0 V to 5.5 V |
| I/O ports | 36 |
| PWM channels | 14 |
| Timers | 3 |
| Communication peripherals | CAN and LIN networking |
| Data movement | DMA-assisted data movement |
| CPU technology | 0.18 µm CMOS |
| Instruction cycle time | 17.8 ns |
| Encapsulado | 48-LQFP, 7 x 7 mm |
| Temperatura de funcionamiento | -40 °C to +125 °C |
| CPU data types | Bit, byte, word, and long-word |
| Addressing modes | 23 |
| Barrel shift | Supported |
| Manufacturer category | 16-bit microcontrollers - MCU automotive MCU |
| Estado del ciclo de vida | Active |
Guía de configuración de pines de MB96F315RSBPMC-GSE2 48-lqfp, 7 x 7 mm
Configuración de pines para MB96F315RSBPMC-GSE2 (encapsulado 48-lqfp, 7 x 7 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para MB96F315RSBPMC-GSE2.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
MB96F315RSBPMC-GSE2 es adecuado para 6 aplicacións: Automotive CAN Network Controller, Industrial LIN Control Module, Motor and Actuator Control, Timer and PWM Control System, Embedded Data Acquisition Controller, Automotive Body and Peripheral Control.
Automotive CAN Network Controller
The MB96F315RSBPMC-GSE2 fits automotive network-control nodes that need a 16-bit CPU, CAN communication, deterministic timers, and a 3.0–5.5 V operating range. The 56 MHz internal clock provides headroom for protocol processing and control-loop tasks, while DMA-assisted movement can reduce CPU involvement when transferring data among memory and peripherals. The 48-LQFP package supports compact multilayer PCB designs. Before production use, confirm the exact transceiver interface, CAN channel configuration, pin multiplexing, startup behavior, and automotive qualification documentation.
Recomendado
Industrial LIN Control Module
For distributed industrial equipment, the MB96F315RSBPMC-GSE2 can act as a LIN-connected supervisory or actuator controller. Its 16-bit F²MC-16FX core, 3 timers, 14 PWM channels, and CAN/LIN networking support combine communication with real-time control functions. The 36 I/O ports allow integration of sensors, switches, status indicators, and actuator drive signals. A 5 V system can operate within the stated 3.0–5.5 V supply range, but external protection, filtering, watchdog strategy, and transceiver selection should be designed around the final wiring environment.
Recomendado
Motor and Actuator Control
The device is suitable for embedded motor or actuator control where a compact controller must combine timers, PWM generation, I/O, and serial networking. Its 56 MHz maximum internal clock and controller-oriented instruction set can support responsive sequencing and closed-loop update tasks, while DMA-assisted movement helps with data exchange. The 14 PWM channels and 3 timers are useful for multi-channel sequencing, although actual motor-drive performance depends on the selected power stage, current sensing, protection circuitry, and timing budget. Confirm pin assignments and peripheral limits in the datasheet.
Recomendado
Timer and PWM Control System
With 3 timers and 14 PWM channels, the MB96F315RSBPMC-GSE2 can centralize timing and pulse-generation functions in a compact 48-LQFP controller. It is relevant to stepper-motor sequencing, solenoid control, keypad scanning, lighting, or general-purpose industrial timing. The 16-bit architecture and 56 MHz clock provide additional processing capacity for supervisory logic alongside the timer workload. Designers should verify timer channel mapping, cascaded modes, interrupt behavior, and PWM frequency limits before assigning pins.
Recomendado
Embedded Data Acquisition Controller
The MB96F315RSBPMC-GSE2 can serve as a compact acquisition and conditioning controller for industrial sensor systems. Its 36 I/O ports, DMA-assisted data movement, timers, and 16-bit CPU provide resources for sampling, filtering, status monitoring, and communication. The 3.0–5.5 V supply range allows integration with 3.3 V or 5 V sensor interfaces, subject to pin-level compatibility. For analog measurement accuracy, use the datasheet to confirm ADC characteristics, reference options, sampling behavior, and any required external support components.
Recomendado
Automotive Body and Peripheral Control
The MB96F315RSBPMC-GSE2 can be evaluated for body-electronics or peripheral-control subsystems that need local I/O, timing, and network communication. Its 48-LQFP 7 x 7 mm package helps reduce board area, while the 16-bit F²MC-16FX core provides more headroom than a basic 8-bit controller for protocol stacks and supervisory logic. The operating-temperature range reaches +125 °C. Before using it in a vehicle, confirm the exact automotive grade, qualification records, transient requirements, EMC strategy, and safety assumptions from official documentation.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para MB96F315RSBPMC-GSE2 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | MB96F315RSBPMC-GSE1 | MB96F315 |
|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | 48-LQFP, 7 x 7 mm | 48-LQFP | 48-LQFP family class |
| CPU architecture | 16-bit F²MC-16FX | Related MB96310-series MCU | MB96F315-series MCU |
Diferenciadores clave
- Controller-oriented 16-bit F²MC-16FX architecture (frente a MB96F315RSBPMC-GSE1)
- Verified CAN/LIN networking support (frente a MB96F315)
- 160 KB Flash in 48-LQFP package (frente a MB96F315RSBPMC-GSE1)
Notas de diseño
Use the official 48-LQFP land pattern and verify pin 1 orientation, pad numbering, solder-mask clearance, and paste volume against the manufacturer package drawing. The 0.5 mm class pitch called out in the indexed part description requires controlled reflow profiles and inspection. Keep power and ground connections short, provide adequate plane connectivity, and reserve clean return paths for CAN, LIN, timer, and high-current output signals.
Do not treat a same-package MB96F315-family device as automatically interchangeable. Confirm pin multiplexing, 3.0–5.5 V electrical limits, clock setup, Flash organization, reset behavior, peripheral channels, and programming compatibility in the manufacturer documentation. The verified search data identifies MB96F315RSBPMC-GSE1 as a related comparison target, but it does not prove that firmware or PCB requirements are identical.
Plan the power rails for the MCU and any external CAN, LIN, motor-driver, or sensor interfaces. The device is specified for 3.0–5.5 V, but the actual operating point depends on clock speed, I/O loading, temperature, and peripheral activity. Add local decoupling at the supply pins, keep return currents controlled, and include appropriate protection against automotive transients or industrial wiring noise when the application environment requires it.
Separate communication and control routing from sensitive analog or timing-sensitive signals. CAN and LIN transceivers should be placed near their connectors or protected network interfaces, while clock-sensitive routing should remain short and referenced to a continuous ground plane. Follow the manufacturer peripheral and pin-muxing guidance before assigning functions; the supplied verified data does not include a complete pinout table.
Información de cumplimiento
The verified distributor and index data identifies an automotive MCU classification and an operating temperature range of -40 °C to +125 °C, but it does not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm current compliance documents with the manufacturer or authorized distributor.