Microcontroladores

Productos (20.000+)

MC9S12D64MFUER - HCS12 16-bit MCU, 64KB Flash, 80-QFP | NXP (Tape & Reel)
MC9S12D64MFUER

MC9S12D64MFUER - HCS12 16-bit MCU, 64KB Flash, 80-QFP | NXP (Tape & Reel)

The NXP Semiconductors MC9S12D64MFUER is a 16-bit HCS12 microcontroller (MCU) featuring an HCS12 CISC core running at 25 MHz, 64 KB of on-chip Flash program memory, and a 2.5 V/5 V supply range, housed in an 80-pin QFP (PQFP-80, 14x14 mm) surface-mount package. It integrates standard on-chip peripherals including two asynchronous serial communications interfaces (SCI), an 8-channel IC/OC enhanced capture timer, two 8-channel 10-bit analog-to-digital converters (ADC), an 8-channel pulse-width modulator (PWM), a CAN 2.0 module, and a byte data link controller (BDLC), plus 59 general-purpose I/O pins for interfacing to external components. The Flash-based program memory supports byte-erasable in-application reprogramming, simplifying field firmware updates without requiring external boot memory. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and a set of peripherals such as timers, communication controllers, and analog interfaces. Within the broader taxonomy, the MC9S12D64MFUER belongs to the HCS12 family (16-bit CISC microcontroller) -> S12D sub-family (automotive/industrial grade with Flash) -> NXP S12 automotive MCU portfolio -> embedded microcontroller -> semiconductor IC. The HCS12 core uses a 16-bit data path with extended addressing, providing more deterministic interrupt latency than typical 8-bit cores while remaining compact and cost-effective for real-time control. Key differentiators of the MC9S12D64MFUER include integrated CAN 2.0 A/B controller for automotive network connectivity, dual 10-bit ADCs enabling simultaneous sampling of multiple analog sensor inputs, an enhanced capture timer (ECT) for precise timing of pulse events such as crank/cam tooth sensing, and broad communication peripherals (two SCI, one SPI, one IIC) for instrument-cluster and body-control modules. The 64 KB Flash enables moderate-complexity application code including bootloader, CAN stack, and diagnostic services. Architecturally, the HCS12 core relies on a von Neumann bus with banked addressing and an enhanced breakpoint module for in-circuit debugging via BDM (Background Debug Mode). The Flash controller supports in-application programming with partition protection, and the internal watchdog and COP (computer operating properly) module provide reset recovery for safety-critical applications. Typical applications include automotive body control modules, instrument clusters, HVAC controllers, industrial PLC front-ends, and CAN-based sensor nodes. Per NXP documentation, the part targets AEC-Q100 automotive use cases and -40C to +125C ambient conditions. Design tip: place a 0.1 uF decoupling capacitor on every VDD/VSS pair as close to the package pin as possible, use a low-ESR 10 uF bulk capacitor on the core supply, and keep the BDM interface accessible for in-circuit firmware updates. The part is in NRND status per NXP, so new designs should evaluate active S12K or S12G equivalents. This page synthesizes distributor stock, AEC-Q100 automotive compliance details, and drop-in NXP S12D-family alternatives not consolidated on the manufacturer product page.

Cotización Contacto
MC9S12D64MPVE - 16-bit HCS12 MCU 64KB Flash 25MHz LQFP-112 | NXP
MC9S12D64MPVE

MC9S12D64MPVE - 16-bit HCS12 MCU 64KB Flash 25MHz LQFP-112 | NXP

The NXP MC9S12D64MPVE is a 16-bit HCS12 microcontroller IC operating at 25 MHz with 64 KB (64K x 8) of on-chip Flash program memory, packaged in a 112-pin LQFP (20 x 20 mm) form factor. It belongs to NXP's S12D family of automotive-grade microcontrollers, integrating standard on-chip peripherals including two asynchronous serial communications interfaces (SCI), an 8-channel IC/OC enhanced capture timer, two 8-channel 10-bit analog-to-digital converters (ADC), an 8-channel pulse-width modulator (PWM) and 20 discrete digital I/O lines. A microcontroller (MCU) is a single-chip computer that combines a CPU core, volatile and non-volatile memory, and a set of peripherals used to interface with sensors, actuators and other digital logic. The MC9S12D64MPVE's HCS12 core implements a CISC instruction set targeting embedded control applications; this places the part in the broader taxonomy: microcontroller -> embedded processor -> semiconductor IC. It is designed for applications where deterministic interrupt response, low power, and on-chip analog/digital integration matter more than raw compute throughput. Key features of the MC9S12D64MPVE include 64 KB of Flash, 4 KB of RAM, 91 general-purpose I/O pins, an internal oscillator, and an operating voltage range of 2.5 V / 5 V. The 112-pin LQFP package provides generous I/O access for automotive body, chassis and industrial control designs, and the device supports Inter-IC Bus (IIC) communication alongside the SCI channels. Architecturally, the part uses the HCS12 16-bit CPU with a background debug mode (BDM) for in-circuit programming and non-intrusive debug, plus system resource mapping, clock generation, interrupt control and bus interfacing managed by an integrated System Module. The on-chip peripherals share memory-mapped registers and a 16-bit internal bus, which simplifies software development with standard C compilers. Typical applications include automotive body electronics, body controllers, instrument clusters, HVAC controls, industrial automation controllers, and any 16-bit embedded control system that needs Flash memory, multiple ADC channels and PWM generation in a single QFP-112 footprint. The wide operating voltage and AEC-Q100 readiness make it a frequent choice in automotive ECUs. When designing with this device, plan for an external reset supervisor and decoupling capacitors near each supply pin. Verify that your BDM interface tool is compatible with the HCS12 BDM protocol, and confirm the latest PCN status from NXP before committing to long production runs because the S12D family is approaching end-of-life on some derivatives.

Cotización Contacto
MC9S12D64VFU - 16-Bit 25MHz 64KB MCU | NXP
MC9S12D64VFU

MC9S12D64VFU - 16-Bit 25MHz 64KB MCU | NXP

NXP Semiconductors MC9S12D64VFU is a 16-bit HCS12 microcontroller with a 25 MHz maximum clock, 64 KB of embedded Flash memory, and an 80-QFP surface-mount package measuring 14 mm by 14 mm. The device belongs to the S12 automotive microcontroller family and is identified as AEC-Q100-qualified for automotive-grade applications. A microcontroller is a programmable semiconductor device that combines a processor core, memory, and peripherals in one integrated circuit. Within the broader hierarchy of semiconductor and embedded processing, the MC9S12D64VFU provides firmware-controlled digital control, communication, timing, and input/output processing. Its HCS12 core uses a 16-bit CISC architecture, making it suitable for embedded control systems that benefit from broad peripheral integration and established automotive ecosystem support. The primary engineering characteristics are a 25 MHz operating clock, 64 KB Flash program memory, 16-bit CPU architecture, and 80-QFP package. The Flash memory provides a nonvolatile location for application code, while the CISC instruction set supports compact control routines. The product listing identifies the device as a 2.5 V or 5 V automotive-grade microcontroller with an industrial temperature grade. Its square QFP package uses gull-wing leads for board-level mounting. Technical differentiation from older or more specialized automotive controllers depends on application timing, memory demand, peripheral availability, and qualification requirements. The 25 MHz HCS12 core is suitable for real-time automotive subsystems that need deterministic control without moving to a larger pin-count package. Designers should still verify peripheral assignments, clock configuration, memory map, and external component requirements against the NXP MC9S12D64VFU datasheet before releasing a PCB or production firmware. Typical applications include electronic throttle and body-control modules, engine and transmission controllers, dashboard and climate-control electronics, sensor aggregation units, actuator controllers, and general automotive I/O modules. The combination of 64 KB Flash, AEC-Q100 identification, and a compact 80-lead package is especially relevant where code storage, qualification, and board area must be balanced. A critical design consideration is validation of the device variant suffix and pin assignment for the intended automotive program. Confirm the 2.5 V or 5 V operating condition, clock implementation, external crystal or resonator requirements, decoupling, programming interface, and exposed-board handling guidelines directly from the manufacturer documentation. This product page combines the exact device identity, verified package and core specifications, qualified-drop-in analysis, application guidance, and practical design notes. It also distinguishes the directly interchangeable VFUE ordering code from MC9S12D64VFU so procurement teams can maintain controlled, traceable component substitutions.

Cotización Contacto
MC9S12D64VFUE - 16-bit HCS12 MCU 64KB Flash 25MHz | NXP
MC9S12D64VFUE

MC9S12D64VFUE - 16-bit HCS12 MCU 64KB Flash 25MHz | NXP

The NXP (formerly Freescale/Motorola) MC9S12D64VFUE is a 16-bit HCS12 microcontroller with a 64KB (64K x 8) flash memory, 25MHz bus-clocked CISC core, and a 5V-supply 80-pin QFP (14x14 mm) package. A 16-bit microcontroller (MCU) integrates a processor core, memory, and peripherals such as timers, serial interfaces, and analog-to-digital converters on a single chip. Within the power-management and embedded-control hierarchy, an MCU sits at the top of the embedded IC taxonomy (semiconductor -> microcontroller -> 16-bit MCU -> HCS12 family), executing control logic for automotive and industrial systems. The HCS12 (S12) architecture is an enhanced evolution of the classic 68HC12 CISC core, maintaining code compatibility while raising performance. Key features of the MC9S12D64VFUE include 64KB of on-chip flash program memory for field-updatable firmware, a 25MHz operating frequency, 2.5V/5V dual-rail design points typical of the S12D family, and the 80-QFP 14x14mm surface-mount package that simplifies routing for automotive ECU boards. As a member of the pin-compatible S12D family, it enables scalable designs where memory density can be changed without PCB redesign. The S12D family was designed for automotive multiplexing applications such as body control modules, instrument clusters, gateways, and HVAC controllers, where CAN and other serial communication links interconnect multiple ECUs. The industrial market also uses these MCUs for motor control, valve actuation, and building automation nodes that require robust 5V I/O. The CISC HCS12 architecture with rich addressing modes and single-cycle flash execution keeps code density high, reducing flash requirements compared with RISC competitors. Backward compatibility with HC12 assembly eases migration of legacy designs. Designers should verify flash endurance, EMI countermeasures, and 5V rail sequencing against the manufacturer datasheet, and confirm current lifecycle status with NXP before new designs, as legacy HCS12 devices are progressively superseded by S12G/S12XE parts. This page synthesizes distributor pricing, drop-in family alternatives, design guidance, and FAQ content not consolidated on the manufacturer datasheet alone.

Cotización Contacto
MC9S12D64VPVE - HCS12 16-bit MCU, 64KB Flash | NXP Semiconductors
MC9S12D64VPVE

MC9S12D64VPVE - HCS12 16-bit MCU, 64KB Flash | NXP Semiconductors

The NXP Semiconductors MC9S12D64VPVE is a 16-bit HCS12 microcontroller IC featuring 64KB of Flash program memory, 4KB of RAM, and a maximum operating frequency of 25 MHz, housed in a 112-pin LQFP package measuring 20x20 mm. This part is supplied in Tray packaging and is built on NXP's HCS12 CISC architecture, designed for a wide range of automotive and industrial embedded control applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash for program code and RAM for working data), and programmable peripherals into one IC. Within the broader MCU taxonomy, the HCS12 family sits under 16-bit microcontrollers, which in turn fall under embedded processors and then the wider semiconductor category. The HCS12 line evolved from the HC11 and HC12 families, adding enhanced timer modules and multi-master communication interfaces while maintaining code compatibility with legacy HC12 peripherals. Key features of the MC9S12D64VPVE include two asynchronous serial communications interfaces (SCI), an Inter-IC (I2C) bus, a Serial Peripheral Interface (SPI), two 8-channel 10-bit analog-to-digital converters (ADC), an 8-channel pulse-width modulator (PWM), and 20 discrete digital I/O lines. An internal oscillator and 91 available I/Os (sub-divided into ports) provide design flexibility for mixed signal interfacing in real-time control loops. Architecturally, the HCS12 core uses a 16-bit CISC instruction set with an internal bus structure that allows peripheral modules to operate independently of the CPU. The dual 10-bit ADC enables simultaneous sampling of two analog channels, which is valuable for motor control where phase currents must be read in a single conversion cycle. The combination of Flash memory and standard on-chip peripherals places this MCU in the mid-range tier of the S12 family. Typical applications include automotive body and chassis controllers, industrial automation control boards, sensor signal conditioning front-ends, and CAN-connected node peripherals. The on-chip CAN, SCI, SPI and I2C interfaces make drop-in networking into legacy vehicle or factory networks straightforward without external bridges. When designing with this device, plan for the 2.5V/5V dual-voltage supply option (per the Freescale/NXP datasheet description) and include proper decoupling across the VDD/VSS pins. Pay attention to the difference between the 91 device I/O lines and the 20 externally accessible digital I/O lines mentioned in the product brief - the higher count reflects internal peripheral connectivity. This page synthesizes distributor pricing, drop-in alternatives from the HCS12 family, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
MC9S12DB128BCPV - 16-Bit 25MHz 128KB Flash HCS12 MCU | NXP
MC9S12DB128BCPV

MC9S12DB128BCPV - 16-Bit 25MHz 128KB Flash HCS12 MCU | NXP

The NXP MC9S12DB128BCPV is a 16-bit HCS12 family microcontroller (MCU) featuring a 25 MHz CPU, 128 KB on-chip Flash, 8 KB RAM and 2 KB EEPROM, integrated in a 112-pin LQFP (20x20 mm) package. Part of the HCS12DB sub-family (formerly Freescale/Motorola S12DB), the device integrates an SCI, two SPI, an IIC, an 8-channel 10-bit ADC, PWM channels, and CAN 2.0 A/B (msCAN) interfaces for automotive and industrial networking. An MCU (microcontroller unit) is a single-chip computer that combines a processor core, program memory (Flash), working memory (RAM), and a configurable set of peripherals on one die. Within the broader IC hierarchy, an MCU sits inside Embedded Microcontrollers, which are themselves a category of Integrated Circuits. The HCS12 family from NXP is a 16-bit CISC core derived from the original Motorola HC12 architecture, optimized for deterministic real-time control in automotive body and chassis applications. Key features include the 25 MHz bus clock (effectively 50 MHz via internal PLL on related HCS12 derivatives), background debug mode (BDM) for non-intrusive in-circuit programming, and on-chip voltage regulation for single 5V supply operation. The 10-bit successive-approximation ADC with 8 channels supports 6 us analog software, 6-bit conversion at full speed, while the msCAN module complies with CAN 2.0A/B for body-network communication. Hardware timers include a 16-bit pulse accumulator and PWM channels suitable for motor and lighting control. The HCS12 architecture uses a 16-bit data path with variable-length instructions, a hardware stack pointer, and interrupt-friendly indexed addressing. On-chip Flash supports in-application reprogramming via BDM or the in-application programming (IAP) routine, enabling firmware updates in the field. The 112-LQFP package exposes nearly all HCS12 pins including dedicated CAN TX/RX, SCI TX/RX, SPI MOSI/MISO/SCK and the BDM BKGD and MODC pins. Typical applications include automotive body controllers, instrument clusters, HVAC control modules, industrial CAN nodes, and seat/mirror/window control ECUs. The msCAN peripheral and 5V-tolerant I/O make the device well matched to 12V automotive body electrical environments where robust in-vehicle networking and deterministic response to sensor inputs are required. When designing with this part, ensure proper decoupling (100 nF ceramic per VDD pin, 10 uF bulk at the regulator output) and follow the BDM layout recommendations in the HCS12 family reference manual. The device is qualified for industrial temperature operation; select the -BCPV suffix variant for 0 to +70C ambient or -BCPV suffix with the automotive grade ordering code for -40 to +125C. This page synthesizes the manufacturer datasheet, distributor pricing, drop-in same-package alternatives and practical design notes that are not co-located on the official NXP product folder, providing an information-gain reference for engineers selecting a 16-bit automotive MCU.

Cotización Contacto
MC9S12DB128CFUE - HCS12 16-Bit 25MHz 128KB Flash MCU | NXP | 80-QFP
MC9S12DB128CFUE

MC9S12DB128CFUE - HCS12 16-Bit 25MHz 128KB Flash MCU | NXP | 80-QFP

The NXP MC9S12DB128CFUE is a 16-bit HCS12 microcontroller with 128KB Flash, 25MHz bus speed, and CAN/LIN/Ethernet-ready peripheral set, housed in an 80-pin QFP (14x14 mm) package. The HCS12DB family is purpose-built for automotive multiplexing and body-electronics networks, integrating an enhanced HCS12 CPU core with on-chip CAN, SCI, SPI, and IIC interfaces. An HCS12 microcontroller is a 16-bit CISC automotive MCU family from Freescale/NXP designed for distributed body and chassis control networks. The HCS12 sits within the broader taxonomy: 16-bit microcontroller -> automotive MCU -> embedded MCU -> semiconductor IC. Its 16-bit datapath and rich on-chip peripherals reduce external component count compared to 8-bit microcontrollers while remaining lower-cost than 32-bit ARM-based auto MCUs. Key features of the MC9S12DB128CFUE include 128KB on-chip Flash (128K x 8), 2KB EEPROM for non-volatile data storage, 8KB RAM, an integrated CAN 2.0 module, dual SCI (UART) channels, SPI and IIC interfaces, an 8-channel 10-bit ADC, and a PWM module with up to 8 channels. The 'DB' suffix indicates the inclusion of the byte-level EEPROM emulation and enhanced CAN controller that distinguishes this sub-family from the base S12D. Architecture-wise, the HCS12DB uses a 16-bit CISC core with enhanced indexed addressing and a Background Debug Mode (BDM) interface, supporting non-intrusive in-circuit debugging. The 25MHz bus provides 40ns minimum instruction cycle. Integrated voltage regulator and PLL reduce external analog complexity. ECC on Flash improves automotive reliability. Typical applications include automotive body control modules, door/window/seat modules, instrument cluster slave MCUs, HVAC control panels, and CAN-node gateway controllers in multiplexed vehicle networks. Industrial equivalents use it for sensor interfaces and CAN-bus distributed I/O. Compact industrial control nodes benefit from its integrated CAN and 16-bit ADC. Design consideration: the QFP-80 package requires careful thermal copper-pour management on inner vias for high-current GPIO drive conditions. When migrating between S12DB family members, verify interrupt-vector mapping and BDM clocking differ across mask sets. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not consolidated on the manufacturer datasheet PDF.

Cotización Contacto
MC9S12DB128CPV - HCS12 16-Bit MCU 128KB Flash 112-LQFP | NXP
MC9S12DB128CPV

MC9S12DB128CPV - HCS12 16-Bit MCU 128KB Flash 112-LQFP | NXP

The NXP MC9S12DB128CPV is a 16-bit HCS12 microcontroller from the HCS12DB family featuring 128KB of on-chip Flash program memory and housed in a 112-pin LQFP package (20x20 mm). It operates at a core frequency of 25 MHz, integrates CANbus, I2C, SCI and SPI connectivity, and provides 91 general-purpose I/O lines for automotive and industrial embedded designs. What is a 16-bit automotive microcontroller? An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), and peripherals such as timers, ADCs, and communication controllers on a single die. Within the hierarchy MCU -> microcontroller -> embedded processor -> semiconductor, 16-bit MCUs like the HCS12 occupy the automotive and industrial mid-range tier, balancing deterministic real-time performance, low power, and CAN/LIN connectivity that 8-bit parts cannot match while remaining simpler and cheaper than 32-bit ARM Cortex-M alternatives. Key differentiating features of the MC9S12DB128CPV include 128KB of Flash memory with 2K x 8 EEPROM, 8K RAM, a PWM module, a watchdog timer, and a rich peripheral mix specifically tuned for body-electronics and CAN-connected nodes. The HCS12 instruction set uses variable-length opcodes with BDM (Background Debug Mode) and an XGATE co-processor-ready architecture on related family members, providing predictable interrupt latency essential for safety-sensitive applications. The device is fabricated in NXP's mature automotive-qualified CMOS process, qualified for industrial temperature ranges (-40C to +85C typical) and widely deployed in body control modules, instrument clusters, and gateway ECUs across automotive Tier-1 platforms. It remains a long-lived member of NXP's HCS12 portfolio. Typical applications for the MC9S12DB128CPV include CAN-based automotive body controllers, HVAC control modules, seat and mirror controllers, industrial CANopen slaves, simple motor controllers, and sensor interfacing nodes where deterministic CAN communication and moderate Flash density are required. Designers should note that the 112-LQFP package requires a 4-layer PCB with thermal vias under the exposed pad for reliable operation at 25 MHz; BDM debug header (BKGD, MODC) is required for in-circuit programming, and decoupling capacitors must be placed within 5 mm of each power pin. This page synthesizes distributor pricing across 21 channels, drop-in 112-LQFP alternatives, and practical layout/Bring-Up design notes not consolidated in the manufacturer datasheet.

Cotización Contacto
MC9S12DB128MPVE - 16-Bit HCS12 MCU, 128KB Flash, 25MHz | NXP
MC9S12DB128MPVE

MC9S12DB128MPVE - 16-Bit HCS12 MCU, 128KB Flash, 25MHz | NXP

The NXP Semiconductors MC9S12DB128MPVE is a 16-bit HCS12 family microcontroller IC running at up to 25 MHz, integrating 128 KB of FLASH program memory in a 112-pin LQFP package (20x20 mm). It belongs to NXP's (formerly Freescale/Motorola) HCS12 architecture, a successor to the HC11, designed for automotive and industrial embedded applications requiring deterministic real-time control. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (FLASH/ROM for program, RAM for data), and peripheral interfaces (timers, ADC, communication controllers) on one die. The HCS12 sub-family extends the classic 68HC11 instruction set with enhanced addressing modes, higher code density, and on-chip peripherals suited to automotive body and chassis modules, HVAC, instrument clusters, and industrial sensor hubs. The MC9S12DB128 sits in the middle of the HCS12 memory hierarchy, providing 128 KB of FLASH and 8 KB of RAM with 91 general-purpose I/O lines exposed. Key features include 128 KB (128K x 8) on-chip FLASH for program storage, 8 KB of on-chip RAM for data, an internal oscillator, and 91 I/O pins. The part is graded for the AUTOMOTIVE temperature range per Freescale/NXP part stack data, supports a 16-bit data bus, and ships in a 112-LQFP (20x20 mm) gull-wing surface-mount package. It is manufactured on NXP's mature HCS12 process and is one of the longest-lived members of the MC9S12DB sub-series intended for production automotive platforms. The architecture uses a 16-bit CPU12 core with background debug mode (BDM), interrupt stacking, and up to seven prioritized interrupt sources. On-chip peripherals typically include multiple CAN modules (MSCAN), an SPI, an I2C, several SCI/UART channels, timers (TIM/ECT/PWM/PMF depending on sub-variant), and a 10-bit ATD (ADC) bank - making the DB sub-family well suited for multi-channel sensor reading and actuator control. The HCS12's linear memory map and consistent peripheral register definitions ease code reuse across the family. Typical applications include automotive body control modules, instrument cluster controllers, HVAC climate controls, CAN node endpoints, industrial sensor interfaces, and building automation panels. Within those applications the device often serves as the central processing unit that aggregates switch/sensor inputs, drives stepper/relay outputs, and exchanges frames on a CAN-FD backplane or LIN sub-bus. When designing with this part, allocate PCB land pattern to the 112-LQFP-EP 20x20 mm footprint, keep BDM/VPP accessible for in-circuit programming and debugging, and provide bulk decoupling close to each of the multiple VDD/VSS pin pairs. Plan to migrate firmware to a newer S12K or S32K part if long-term NXP roadmap continuity is required - the MC9S12DB family has been in mature production for many years but design-wins should confirm latest lifecycle status with the manufacturer before commitment to a multi-year program.

Cotización Contacto
MC9S12DG128BCFU - HCS12 16-Bit MCU, 25MHz, 128KB Flash | NXP
MC9S12DG128BCFU

MC9S12DG128BCFU - HCS12 16-Bit MCU, 25MHz, 128KB Flash | NXP

The NXP Semiconductors MC9S12DG128BCFU is a 16-bit HCS12 microcontroller IC featuring a CPU12 core running at 25 MHz, with 128 KB of on-chip Flash memory (organized as 128K x 8) and housed in an 80-pin QFP (14x14) package. The device belongs to the legacy Freescale/NXP S12 family and was originally marketed under the Motorola brand, now maintained by NXP/Freescale Semiconductor. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash/RAM/ROM), and programmable peripherals. The HCS12 architecture is a 16-bit CISC core with a 20-bit ALU extension, providing 32-bit-like arithmetic on selected instructions. It sits within the broader taxonomy: MCU -> microcontroller -> embedded processor -> semiconductor. Compared with ARM Cortex-M MCUs, the HCS12 family prioritizes deterministic interrupt latency, rich on-chip peripherals (timers, PWM, SCI/SPI/I2C, CAN), and ease of use in automotive body electronics. Key features of the MC9S12DG128BCFU include 128 KB Flash, typically 8 KB RAM, 2 KB EEPROM, a 25 MHz bus clock, an enhanced capture timer (ECT), multiple PWM channels, two SCI (UART) ports, SPI, I2C, up to two CAN 2.0 modules, and an 8-channel 10-bit ADC. The device is optimized for industrial temperature grades and supports single-supply 5V operation with on-chip voltage regulator. Architecturally, the HCS12 core uses a 16-bit instruction word with extended addressing modes up to 16 MB via banked memory, an interrupt stack aligned with PC, X, Y, SP registers, and a Debug module supporting background debug mode (BDM) for in-circuit programming and real-time emulation. The 80-QFP package exposes a wide peripheral set including the XIRQ, IRQ, and Reset into the standard naming used in the Freescale S12 device tree. Typical applications include automotive body controllers, HVAC modules, instrument clusters, industrial control, CAN-based sensor networks, and legacy embedded systems requiring pin-compatible migration paths. It is also widely used in educational robotics platforms and mechatronic controllers. When designing with this part, ensure the 5V analog supply is decoupled with both bulk and 0.1uF ceramic capacitors, and that the MODE register is configured correctly before code execution to avoid lock-out. Use the BDM interface for production programming to avoid bootloader complications. This page synthesizes distributor pricing across 11+ sources, drop-in compatible alternatives from the same S12 family, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
MC9S12DG128BVFU - 16-Bit 50MHz 128KB Flash Automotive MCU | NXP
MC9S12DG128BVFU

MC9S12DG128BVFU - 16-Bit 50MHz 128KB Flash Automotive MCU | NXP

The NXP Semiconductors MC9S12DG128BVFU is a 16-bit HCS12 CISC microcontroller with 128KB flash memory, 50 MHz CPU12 core, designed for 2.5V/5V automotive and industrial applications, housed in an 80-pin PQFP (QFP-80) package. It integrates 128KB of on-chip flash, 8KB RAM, 2KB EEPROM, and a rich set of peripherals including CAN, SCI, SPI, and I2C interfaces. The part is AEC-Q100 qualified for automotive operating environments and supports extended temperature grades common in vehicle electronics. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (ROM/RAM/Flash), and peripherals such as timers, ADCs, and communication interfaces into one package. The MC9S12DG128BVFU belongs to the HCS12 (or S12X) family - a 16-bit CISC architecture from NXP (formerly Motorola/Freescale) widely used in automotive body electronics, chassis control, and industrial automation. Within the broader taxonomy, MCUs sit under microcontrollers > embedded processors > semiconductor devices. Key features include the CPU12 core at 50 MHz, 128KB flash with EEPROM emulation, two CAN 2.0 controllers supporting automotive networking, two SCI (UART) channels, two SPI channels, one I2C channel, an 8-channel 10-bit ADC, PWM modules, and a Background Debug Mode (BDM) interface for non-intrusive in-circuit debugging. The device operates from 2.5V or 5V supplies with low-power stop and wait modes, making it suitable for energy-conscious automotive designs. The HCS12 architecture uses a 16-bit data path with 20-bit address space, supporting up to 1MB of linear addressing. The integrated Enhanced Capture Timer (ECT) module provides 16-bit input capture/output compare with pulse-width modulation capability. The 80-pin PQFP package offers strong thermal performance and is compatible with conventional SMT assembly lines, although newer QFP leadframes or QFN alternatives are increasingly preferred for miniaturized designs. Typical applications include automotive body controllers, instrument clusters, HVAC modules, central locking systems, CAN nodes, seat controllers, and industrial PLC interfaces. The combination of CAN + SCI + SPI + I2C makes it particularly well suited to gateway nodes that bridge LIN sub-nets with a CAN backbone. The wide operating temperature range and AEC-Q100 grade extend its use to under-hood and chassis electronics. When designing with this MCU, ensure proper decoupling on each supply pin, maintain the specified 50 MHz oscillator tolerance, and respect the 5V-tolerant I/O pin assignments. For firmware development, NXP's CodeWarrior (legacy) and S32 Design Studio toolchains provide full compiler, debugger, and BDM support; the BDM interface simplifies real-time debug without halting the CPU.

Cotización Contacto
MC9S12DG128CPV - 16-Bit HCS12 MCU, 128KB Flash | NXP
MC9S12DG128CPV

MC9S12DG128CPV - 16-Bit HCS12 MCU, 128KB Flash | NXP

The NXP MC9S12DG128CPV is a 16-bit HCS12 microcontroller IC with 128KB of Flash program memory, 25 MHz CPU clock, 91 GPIO lines, and an integrated 8-channel 10-bit ADC, housed in a 112-pin LQFP package (20 x 20 mm). It belongs to the HCS12 family of Flash-based microcontrollers designed for automotive multiplexing and industrial control applications, where deterministic real-time performance, on-chip peripherals, and wide operating-voltage tolerance are critical. What is an HCS12 microcontroller? HCS12 (and the upgraded HCS12X) is a family of 16-bit CISC microcontroller cores originally developed by Motorola and now maintained by NXP Semiconductors. Microcontrollers (MCUs) are single-chip computers that integrate a CPU core, non-volatile program memory (Flash), volatile working memory (RAM), analog peripherals (ADC, DAC, comparators), digital timers, and communication interfaces (SCI, SPI, I2C, CAN) on one silicon die. Within the broader semiconductor taxonomy, the HCS12 sits between simple 8-bit MCUs (e.g. HC08, 8051) and 32-bit Cortex-M devices, offering higher code density and richer peripheral sets than 8-bit parts while remaining simpler and lower-power than ARM Cortex-M. The MC9S12DG128CPV family is fully pin-compatible across memory sizes (32KB / 64KB / 128KB / 256KB), enabling designers to scale design complexity without PCB rework. Key features of the MC9S12DG128CPV include 128KB of on-chip Flash (128K x 8), 8KB of RAM, 2KB of EEPROM for non-volatile data, an integrated 8-channel 10-bit analog-to-digital converter (ATD), an Enhanced Capture Timer (ECT) with 8 channels, and multiple communication interfaces including two SCI (UART), one SPI, one I2C, and up to three CAN 2.0A/B modules (MSCAN). The device operates from a single 5V supply (extended 4.5V-5.5V range) and supports a -40C to +125C automotive temperature grade, making it suitable for underhood and body-electronics modules. Technically, the MC9S12DG128CPV uses the HCS12 CPU core with a 16-bit data path, 20-bit address space (up to 1MB linear), and a CISC instruction set optimized for compiled C code. Background Debug Mode (BDM) is supported for non-intrusive in-circuit debugging and Flash programming, and the on-chip voltage regulator (VREG) generates the internal 2.5V core logic supply from the external 5V VDD. Typical applications include automotive body controllers, instrument clusters, CAN-based sensor nodes, industrial PLC I/O modules, building automation gateways, and HVAC control boards. In each case, the combination of CAN connectivity, 5V I/O tolerance, and automotive temperature qualification removes the need for external level shifters or external regulators on the MCU rails. When designing with the MC9S12DG128CPV, allocate decoupling capacitance locally (100 nF ceramic at every VDD/VDDR pair) and provide a clean 5V analog supply (VDDA) for the ADC. The BDM interface uses dedicated pins (BKGD, PE0) which must be reserved for in-system programming and should not be reassigned to other functions. Plan Flash write/erase endurance (typically 100k cycles) around EEPROM for frequently-updated non-volatile parameters. This page synthesizes live distributor pricing, HCS12-family drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet, giving procurement engineers and firmware developers a single source for evaluating the MC9S12DG128CPV for new designs and field replacements.

Cotización Contacto
MC9S12DG128CPVE - 16-bit 25MHz 128KB MCU | NXP
MC9S12DG128CPVE

MC9S12DG128CPVE - 16-bit 25MHz 128KB MCU | NXP

The NXP Semiconductors MC9S12DG128CPVE is a 16-bit HCS12 microcontroller with a 25 MHz core, 128 KB of flash program memory, 112-LQFP package, and integrated automotive-oriented peripherals. It is designed for embedded control systems requiring deterministic serial communication, analog measurement, timing, and PWM functions in a single 112-pin device. The MC9S12D is a flash-based 16-bit MCU family built around the HCS12 core and designed for automotive multiplexing applications. Its feature set includes two asynchronous serial communications interfaces, an 8-channel enhanced capture timer, two 8-channel 10-bit ADCs, an 8-channel PWM module, and 20 discrete digital I/O lines. The device also supports clock generation, interrupt control, resource mapping, and bus interfacing. The MC9S12DG128CPVE combines 128 KB flash, 8 KB RAM, 2 KB EEPROM, and a 16-bit architecture in a 112-LQFP package. The verified distributor specification identifies a 2.35 V to 5.25 V operating supply range, 16-channel 10-bit ADC capability, internal oscillator support, and an operating temperature range of -40°C to +85°C. These values make it suitable for industrial and automotive-style embedded control platforms. Its peripherals support applications involving sensor acquisition, actuator control, communication gateways, and low-speed industrial equipment. Two asynchronous serial interfaces can connect the MCU to external transceivers or sensors, while the ADCs provide analog measurement channels and the PWM channels support motor, lighting, and proportional control functions. The CPVE ordering designation corresponds to the 112-LQFP package and automotive qualification information shown in verified distributor results. Because the part is listed as NRND by NXP, new designs should confirm lifecycle, sourcing, and qualification requirements before committing to a production release. For PCB design, preserve the manufacturer pin assignments and provide decoupling, programming/debug access, clock circuitry, and a clean analog reference implementation according to the datasheet. Validate pin multiplexing, startup behavior, and peripheral timing in the target system.

Cotización Contacto
MC9S12DG128MFUE - 16-Bit HCS12 MCU 128KB Flash 25MHz | NXP
MC9S12DG128MFUE

MC9S12DG128MFUE - 16-Bit HCS12 MCU 128KB Flash 25MHz | NXP

The NXP MC9S12DG128MFUE is a 16-bit HCS12 Flash-based microcontroller delivering 25 MHz CPU performance with 128 KB on-chip Flash, 8 KB RAM, and 2 KB EEPROM, housed in an 80-pin LQFP (14x14 mm) package. The MC suffix designates the standard automotive-grade operating temperature range, while the FUE suffix indicates the LQFP-80 package and Flash memory configuration. It belongs to the broader S12XD/S12D family of automotive microcontrollers designed for body, chassis, and multiplexing applications. (Per the verified data: 16-bit HCS12 core, 128KB Flash, LQFP-80 package.) A 16-bit microcontroller (MCU) is a programmable integrated circuit that combines a CPU core, memory, and peripheral interfaces on a single die. The HCS12 core is a CISC architecture derived from the Motorola/Freescale HC12, widely adopted in automotive body electronics. Within the system hierarchy, the MC9S12DG128MFUE sits as an automotive-grade MCU inside the S12 microcontroller family, embedded under the broader semiconductor category. Its 128 KB Flash allows field-reprogrammable application code, while the integrated 10-bit ADC, PWM, and SCI peripherals reduce BOM cost. Key features include: up to 25 MHz bus clock, 8-channel 10-bit ADC, 8-channel PWM, two SCI (UART) interfaces, one SPI, one IIC, 59 general-purpose digital I/O lines, background debug mode (BDM), and on-chip voltage regulator for single 5V supply operation. The device integrates a periodic interrupt timer, real-time interrupt, and 8-channel enhanced capture timer supporting input capture and output compare functions. Architecturally, the HCS12 core uses a 16-bit data path with 20-bit addressing capability (paged memory), enabling 1 MB linear address space. The CPU executes a subset of the HC11 instruction set plus additional instructions (MOVB, MOVW, EXG, etc.), supporting both C and assembly development. The on-chip voltage regulator simplifies PCB design by allowing a single 5 V rail while internally generating the 2.5 V core voltage. Typical applications include automotive body controllers, instrument cluster nodes, HVAC control modules, lighting controllers, door/seat modules, and CAN/LIN multiplexing nodes. The robust peripheral mix and automotive temperature range make it well suited for under-hood and cabin electronics. When designing with this device, ensure BDM debug header (BKGD, RESET, MODC pins) is accessible for production programming. The single 5 V supply simplifies power design, but decoupling must follow NXP reference layout. Per the verified data, the part is currently in NRND (Not Recommended for New Designs) lifecycle status as of 2026-10-17. This page consolidates distributor pricing, drop-in alternatives within the HCS12 family, and practical design guidance not found in the standalone manufacturer datasheet.

Cotización Contacto
MC9S12DG128MPV - 16-bit HCS12 MCU 128KB Flash 112-LQFP | NXP
MC9S12DG128MPV

MC9S12DG128MPV - 16-bit HCS12 MCU 128KB Flash 112-LQFP | NXP

The NXP (Freescale/Motorola) MC9S12DG128MPV is a 16-bit HCS12 CISC microcontroller with 128KB (128K x 8) Flash program memory, 8KB RAM, and 2KB EEPROM, clocked at up to 25 MHz in a 112-pin LQFP (20 x 20 mm) surface-mount package. A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals on one die, forming the lowest level of the embedded-systems hierarchy: MCU -> embedded processor -> microprocessor-based system. The HCS12 (also written HC9S12 / S12) family is Motorola's (later Freescale, now NXP) 16-bit evolution of the classic 68HC11 architecture, widely used in automotive multiplexing and industrial control. Key features of the MC9S12DG128 include 91 general-purpose I/O lines, CANbus, I2C, SCI, and SPI connectivity, an 8-channel enhanced capture timer with input capture/output compare, two 8-channel 10-bit ADCs, an 8-channel pulse-width modulator (PWM), and a watchdog timer (WDT). It operates from a 5V supply (with 2.5V support per listing data), making it well suited to legacy 5V automotive and industrial buses. Architecturally, the S12 core uses a CISC instruction set with full upward compatibility from the 68HC11, an inter-IC bus for system resource mapping, on-chip clock generation, and background debug mode (BKGD/MODC pin) for unintrusive in-circuit debugging via the standard 6-pin BDM header. Typical applications include automotive body and multiplex networking nodes (CAN), industrial PLC I/O modules, motor control with PWM outputs, and instrumentation requiring 5V-tolerant analog front ends with the dual 10-bit ADCs. Design consideration: this part is listed as Obsolete by NXP; for new designs use the S12G or S12P families, and for maintenance of existing designs secure remaining authorized stock (Rochester Electronics continues to supply). Verify EEPROM and Flash endurance limits against the manufacturer datasheet for long-life products. This page synthesizes distributor availability data, drop-in family alternatives, and obsolescence guidance not consolidated in the manufacturer datasheet.

Cotización Contacto
MC9S12DG128MPVE - 16-bit HCS12 MCU, 128KB Flash, 112-LQFP | NXP
MC9S12DG128MPVE

MC9S12DG128MPVE - 16-bit HCS12 MCU, 128KB Flash, 112-LQFP | NXP

The NXP MC9S12DG128MPVE is a 16-bit HCS12 microcontroller with 128KB Flash memory, 25MHz CPU clock, and 59 digital I/O lines, housed in a 112-pin LQFP package (20x20 mm). It belongs to the S12DG family and integrates standard on-chip peripherals including two asynchronous SCI channels, an 8-channel IC/OC enhanced capture timer, dual 8-channel 10-bit ADCs, and an 8-channel PWM module. The device is targeted at automotive body and chassis applications per the NXP part number suffix. A 16-bit microcontroller (MCU) is a programmable processor core that executes instructions on 16-bit data paths and is widely used in automotive body electronics, industrial control, and motor control where 8-bit devices lack throughput and 32-bit devices are cost-prohibitive. The HCS12 core is NXP's (formerly Freescale) S12 family derivative, supporting CISC instruction set, enhanced addressing modes, and BDM (Background Debug Mode) for non-intrusive in-circuit debug. Within the broader hierarchy, MCUs belong to microprocessors and embedded computing. Key features of the MC9S12DG128MPVE include 128KB on-chip Flash with in-application reprogramming support, 2KB EEPROM and 8KB RAM for data retention and scratchpad storage, dual 10-bit ADC modules supporting 16 analog input channels, and a 50MHz internal bus clock derived from a programmable Phase-Lock-Loop (PLL). The device supports 2.5V/5V mixed-voltage operation per the legacy S12 specification and provides CAN, SCI, and SPI serial interfaces for networked embedded designs. The MC9S12DG128MPVE architecture pairs a CPU12 core with a peripheral bus bridge that runs at twice the CPU frequency for high-throughput I/O, plus an addressable memory map that places Flash at $0000-$FFFF and EEPROM/RAM at upper addresses. The integrated Voltage Regulator (VREG) and Power-On Reset block simplify supply design, while the Enhanced Capture Timer supports input capture, output compare, and pulse accumulator modes for pulse-width measurement. Typical applications include automotive body controllers, instrument clusters, HVAC control modules, lighting controllers, and industrial PLC I/O expansion. Per the Verified Web Data the part is currently NRND (Not Recommended for New Designs), so existing production designs should plan migration to active S12/S12Z successors such as the S12ZVL or S32K1 series. Design consideration: the 112-LQFP footprint has 0.5mm pitch and requires careful PCB layout to maintain signal integrity on the parallel bus and analog inputs. The device's mixed-voltage I/O is internally level-shifted, but designers must observe absolute maximum ratings on 5V-tolerant pins when interfacing to 3.3V peripherals. This page synthesizes distributor stock, NRND lifecycle context, drop-in same-package alternatives from the same S12 family, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
MC9S12DG128VFUE - 16-bit HCS12 MCU, 128KB Flash | NXP
MC9S12DG128VFUE

MC9S12DG128VFUE - 16-bit HCS12 MCU, 128KB Flash | NXP

The NXP Semiconductors MC9S12DG128VFUE is a 16-bit HCS12 microcontroller with 128KB (128K x 8) of on-chip Flash memory, 25 MHz bus speed, and 59 general-purpose I/O lines, housed in an 80-pin LQFP (14x14 mm) surface-mount package. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals into one chip, forming the lowest layer of the embedded-system hierarchy (system-on-chip -> microcontroller -> processor family -> semiconductor device). The HCS12 (S12) family from Motorola/Freescale, now NXP, is a 16-bit CISC architecture widely used in automotive and industrial control, and MC9S12DG128VFUE belongs to the S12DG member of that family. Key features include 128KB Flash program memory, 8KB RAM (8K x 8), 2KB EEPROM, CANbus, I2C, SCI, and SPI connectivity, an 8-channel pulse-width modulator (PWM), a watchdog timer (WDT), and two 8-channel 10-bit ADCs per the NXP product page. The device operates over an automotive temperature range and is AEC-Q100 capable per distributor listings (Arrow). Architecturally, the S12 core integrates standard on-chip peripherals including two asynchronous serial communications interfaces, an 8-channel input capture/output capture enhanced timer, and an Inter-IC Bus, with interrupt control, clock generation, and system resource mapping on-chip. The Flash-based memory design supports in-system reprogramming for field updates. Typical applications include automotive multiplexing, body electronics, industrial automation, and motor control, where the CAN interface and 5V-tolerant I/O are essential. It is also popular in hobby and educational automotive ECU projects. Design consideration: the VFU suffix denotes the 80-pin QFP package and specific speed/temperature grade; verify the bus-clock divider configuration so the 25 MHz maximum bus frequency is not exceeded during oscillator setup. This page synthesizes distributor pricing structure, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, as of 2026-10-18.

Cotización Contacto
MC9S12DG256BCPV - 16-Bit HCS12 MCU, 256KB Flash | NXP
MC9S12DG256BCPV

MC9S12DG256BCPV - 16-Bit HCS12 MCU, 256KB Flash | NXP

The NXP MC9S12DG256BCPV is a 16-bit HCS12 CISC microcontroller with 256KB of Flash program memory, 12KB RAM, and 4KB EEPROM, operating at up to 25 MHz from a 2.5V/5V supply in a 112-pin LQFP package (20x20 mm). It targets automotive multiplexing and body/networking applications and is part of the pin-compatible MC9S12DB/DG family that allows scalable memory and peripheral choices across designs. A microcontroller (MCU) is an integrated circuit combining a CPU core, program and data memory, and configurable peripherals (timers, ADC, communication buses) on a single chip. The HCS12 family is NXP's 16-bit CISC MCU line, used widely in automotive body controllers, instrument clusters, and industrial control. The MC9S12DG256 belongs to the HCS12 → 16-bit MCU → microcontroller hierarchy, sitting under NXP's broader automotive MCU portfolio. Key features include 91 configurable I/O lines, four communication controllers (CAN, SCI, SPI, I2C), PWM channels, a watchdog timer, and an integrated internal oscillator. The 256KB Flash is single-cycle accessible from the HCS12 CPU at 25 MHz, and the 4KB EEPROM is byte-erasable for non-volatile parameters. The wide supply range (2.5V/5V analog plus 5V I/O per the original datasheet) suits automotive 12V-rail transients after external regulation. The HCS12 core pairs a CISC instruction set with enhanced addressing modes (including page and indexed modes) and on-chip hardware debugging (BDM). The 'DG' variant in the family adds dual CAN controllers for body and powertrain networking, plus an enhanced capture timer module useful for pulse counting in industrial sensors. Typical applications include automotive body control modules, instrument clusters, HVAC controllers, CAN/J1939 nodes, industrial PLC I/O cards, and home appliance motor controllers. The wide Flash and the dual-CAN peripheral make it a typical backbone IC for sub-network ECUs. When designing with this part, note the part has been flagged Obsolete by NXP/DigiKey; use it only for legacy repair and long-lifecycle field retrofits. For new designs choose the S12/S12X successor families. Always treat the BDM and Mode pins as critical for first-time programming. This page synthesizes distributor pricing, drop-in same-package alternatives from the S12DB family, and practical design notes (BDM, CAN termination, oscillator) not found in the manufacturer datasheet alone.

Cotización Contacto
MC9S12DG256BVPV - 16-bit 25MHz HCS12 MCU 256KB Flash | NXP
MC9S12DG256BVPV

MC9S12DG256BVPV - 16-bit 25MHz HCS12 MCU 256KB Flash | NXP

The NXP MC9S12DG256BVPV is a 16-bit HCS12 CISC microcontroller running at 25 MHz with 256 KB of on-chip Flash and 12 KB RAM, housed in a 112-pin LQFP (20x20 mm) package. Designed originally by Freescale (now part of NXP) for automotive multiplexing, it integrates two asynchronous SCI ports, an SPI, an I2C bus, two 8-channel 10-bit ADCs, an 8-channel PWM, and 20 discrete digital I/O lines, plus a CAN 2.0 module for in-vehicle networking. An HCS12 microcontroller is a 16-bit CISC MCU family built around the CPU12 core, a successor to the HC11 with enhanced addressing, indexed operations, and a background debug mode (BDM) interface. The MC9S12D sub-family extends the architecture with modular memory and peripheral options so that designers can scale software across pin-compatible derivatives from 128 KB up to 512 KB Flash. This positioning places the HCS12 between 8-bit automotive MCUs (HC08) and 32-bit Power Architecture/ARM parts, offering CAN connectivity and rich analog in a low-cost, well-understood toolchain. Key features include 256 KB Flash (organized as 256K x 8), 4 KB EEPROM, 12 KB RAM, two 10-bit ADC modules, an 8-channel enhanced capture timer, eight PWM channels, two SCI, one SPI, one I2C, one CAN 2.0 A/B controller, and a BDM debug port. The device operates from 5 V (with 2.5 V internal regulator) across the -40 C to +85 C industrial temperature range. Programmable interrupt controller and PLL clock generation support flexible system timing. The architecture uses a 16-bit CPU12 core with a hardware multiply/divide accelerator and a unified memory map, enabling C-compiler-friendly code generation. The internal 2.5 V regulator powers the core while the I/O ring stays at 5 V for noise-tolerant automotive signaling. The CAN module is M_CAN compatible and supports both standard and extended identifiers, easing integration with automotive body and chassis networks. Typical applications include automotive body controllers, instrument clusters, HVAC panels, seat and mirror modules, industrial CAN nodes, and any 16-bit embedded control design with CAN connectivity. The wide operating voltage and industrial temperature rating also suit building automation and heavy-equipment telematics. When migrating from an HC08 design, the HCS12 preserves peripheral and toolchain compatibility while adding more memory and CAN hardware.

Cotización Contacto
MC9S12DG256CCFU - 16-bit 25MHz 256KB Flash MCU | NXP
MC9S12DG256CCFU

MC9S12DG256CCFU - 16-bit 25MHz 256KB Flash MCU | NXP

The NXP (Freescale/Motorola) MC9S12DG256CCFU is a 16-bit HCS12 microcontroller with a 256KB (256K x 8) Flash program memory, 25 MHz bus speed, and CANbus, I2C, SCI, and SPI connectivity, housed in an 80-pin LQFP (14x14 mm) package. It integrates 4KB EEPROM, 12KB RAM, 59 general-purpose I/O lines, two 8-channel 10-bit ADCs, an 8-channel PWM, and an enhanced capture timer. A 16-bit microcontroller (MCU) is a single-chip computer combining a CPU core, memory, and peripherals, positioned within the embedded processor hierarchy below 32-bit MCUs but above 8-bit parts. The HCS12 (S12) family descends from the legendary 68HC11 architecture, upgraded to a 16-bit CISC core with Flash memory and PLL-based frequency multiplication, making it a mainstay of automotive body electronics and industrial control since the early 2000s. Key features include the 256KB on-chip Flash supporting bootloaders and large application code, dual CAN 2.0 A/B controllers for multiplexed vehicle networks, and a 5V-tolerant I/O structure that simplifies interfacing with legacy automotive sensors and actuators. The 25 MHz core speed with internal PLL allows low-EMI clock generation from a modest crystal. Architecturally, the S12 CPU executes the HC11-superset instruction set with additional indexed addressing modes, while the interrupt-driven peripheral set (SCI, SPI, IIC, ECT, PWM, ADC) reduces CPU overhead. The part operates over the standard commercial/industrial temperature range per its speed-grade suffix (CC = 25 MHz, 0C to +70C class). At 5V supply it delivers robust noise margins suited to harsh electrical environments. Typical applications include automotive body control modules, instrument clusters, gateways between CAN networks, industrial PLCs, and motor control panels where CAN connectivity and 5V I/O are mandatory. Design consideration: verify availability early - this part is listed as obsolete/NRND by NXP, so new designs should target S12XE or SPC5 successors, and existing designs should secure lifetime-buy stock. This page synthesizes distributor pricing, pin-compatible alternatives, lifecycle status, and design notes not found in a single manufacturer datasheet.

Cotización Contacto
MC9S12DG256CCPV - HCS12 16-bit MCU, 256KB Flash, 112-LQFP | NXP
MC9S12DG256CCPV

MC9S12DG256CCPV - HCS12 16-bit MCU, 256KB Flash, 112-LQFP | NXP

The NXP MC9S12DG256CCPV is a 16-bit HCS12 CISC microcontroller integrating 256 KB of on-chip Flash memory, 12 KB of RAM, and 4 KB of EEPROM, housed in a 112-pin LQFP (20x20 mm) package. The HCS12 core operates at up to 25 MHz bus frequency and is built on a 0.25 µm CMOS process. The part includes 91 general-purpose I/O lines, two asynchronous serial communications interfaces (SCI), two serial peripheral interfaces (SPI), an Inter-IC Bus (I2C) module, an 8-channel 10-bit analog-to-digital converter (ADC), an 8-channel pulse-width modulator (PWM), and a Controller Area Network (CAN 2.0) interface. A microcontroller (MCU) is a single-chip computer that contains a CPU core, non-volatile program memory, working RAM, and a mix of on-chip peripherals such as timers, ADCs, and communication controllers. Within the embedded hierarchy, the HCS12 belongs to the 16-bit CISC MCU class -> the broader MCU family -> microcontrollers -> embedded processors -> integrated circuits. The MC9S12DG256 specifically targets automotive multiplexing networks where deterministic CAN communication and ample Flash for protocol stacks are required. Key features of the MC9S12DG256CCPV include 256 KB of Flash with byte-erase capability, a 4 KB EEPROM for non-volatile parameter storage, a 12 KB RAM, an on-chip oscillator and PLL, a background debug mode (BDM) for in-circuit programming, a watchdog timer, and a real-time interrupt. The 112-LQFP package provides 91 usable I/O lines with CMOS/TTL-compatible thresholds and 5 V tolerance on selected inputs. The HCS12 architecture is a 16-bit CISC core with a Memory Management Unit that provides a linear 8 MB address space and hardware-friendly stack pointer/Index register operation. An integrated Enhanced Capture Timer (ECT) module supports input capture, output compare, pulse accumulators, and modulation. The device is engineered to operate between 2.97 V and 5.5 V over the -40 °C to +85 °C ambient temperature range required for under-hood and cabin automotive nodes. Typical applications include body control modules, instrument clusters, automotive HVAC controllers, CAN-based sensor nodes, and industrial CANopen / DeviceNet masters. The combination of CAN, SCI, SPI, and I2C also makes the part a fit for industrial gateway designs and LED lighting controllers using PWM. When designing with this MCU, allocate the 4 KB EEPROM for write-rare calibration constants rather than wear-intensive logs, and place a 100 nF decoupling capacitor within 5 mm of every VDD/VSS pin pair on the 112-LQFP power grid. The BDM interface requires a 6-pin header for in-circuit debug. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
MC9S12DG256CMPV - 16-bit HCS12 MCU 256KB Flash 112-LQFP | NXP
MC9S12DG256CMPV

MC9S12DG256CMPV - 16-bit HCS12 MCU 256KB Flash 112-LQFP | NXP

The NXP (formerly Freescale / Motorola) MC9S12DG256CMPV is a 16-bit HCS12 CISC microcontroller built around the CPU12 core, featuring 256KB of on-chip Flash memory, a 25 MHz maximum bus clock, and 112-pin LQFP (20x20 mm) packaging qualified to AEC-Q100 automotive grade. It operates from a 2.5V/5V supply and is targeted at automotive multiplexing, body electronics, and CAN/J1850 networked embedded designs requiring deterministic 16-bit performance. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), and a rich set of on-chip peripherals (timers, ADCs, communication controllers) onto a single silicon die. The HCS12 family is the automotive-grade evolution of the original HC12 architecture, providing CISC instruction set compatibility while boosting throughput, lowering EMI, and integrating peripherals tailored to in-vehicle networking. Within the broader semiconductor taxonomy, an MCU belongs to the embedded processor category, sitting below microprocessors (MPUs) in complexity but above simple ASICs in programmability. The MC9S12DG256CMPV offers 256KB of Flash, 12KB of RAM, 4KB of EEPROM, a 10-bit ADC, multiple SCI/SPI/PWM modules, and an enhanced capture/timer. Its 25 MHz CPU12 core delivers 50 MHz effective instruction throughput (using the 2:1 bus-to-core ratio used across HCS12), with BDM (Background Debug Mode) and a single-wire debug interface for in-circuit development and on-board Flash programming. The CPU12 uses a 16-bit data path with accumulator-indexed addressing and an instruction set upwards-compatible with the HC11. On-chip memory mapping places Flash at 0x0000-0x3FFF and 0x8000-0xBFFF, EEPROM at 0x0800-0x0FFF, and RAM at 0x1000-0x1FFF and 0x2000-0x3FFF (configuration-dependent). The integrated MSCAN module supports CAN 2.0A/B at up to 1 Mbps, and the BDLC module supports J1850 VPW for legacy body controllers. Typical applications include automotive body control modules, instrument clusters, door/seat/mirror modules, HVAC controllers, CAN-based sensor nodes, and industrial PLCs that require deterministic 16-bit real-time response. The AEC-Q100 qualification and -40C to +85C (or +125C extended) operating range make the device appropriate for under-hood and passenger-compartment automotive electronic control units. Designers should budget decoupling capacitance of at least 100 nF on every VDD/VSS pair, place a 4.7-22 uF bulk capacitor near the regulator output, and route the oscillator traces symmetrically with a guard ring. For in-circuit programming, the BKGD pin must be accessible; otherwise the device must be pre-programmed before SMT. This page synthesizes distributor availability, AEC-Q100 qualification evidence, drop-in same-package alternatives (including the higher-memory MC9S12DP512MPVE and lower-memory MC9S12A256MPVE), and practical thermal/design notes not found on a single stockist listing.

Cotización Contacto
MC9S12DG256CVPV - 16-Bit 25MHz HCS12 MCU, 256KB Flash | NXP / Freescale
MC9S12DG256CVPV

MC9S12DG256CVPV - 16-Bit 25MHz HCS12 MCU, 256KB Flash | NXP / Freescale

The NXP (formerly Freescale / Motorola) MC9S12DG256CVPV is a 16-bit HCS12 microcontroller featuring a 25 MHz CPU core, 256 KB of on-chip Flash, 12 KB RAM, and 4 KB EEPROM, housed in a 112-pin LQFP (20x20 mm) package. It belongs to the MC9S12D-Family, originally designed for automotive multiplexing applications, and integrates dual asynchronous serial communications interfaces (SCI), two 8-channel 10-bit analog-to-digital converters, an 8-channel enhanced capture timer, and an 8-channel pulse-width modulator (PWM) along with CAN, I²C, and SPI interfaces. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (Flash/EEPROM), working memory (RAM), and a programmable set of peripherals such as timers, communication controllers, and analog I/O on a single silicon die. Within the broader semiconductor taxonomy, the MC9S12DG256CVPV sits in the hierarchy: HCS12 core -> 16-bit CISC MCU -> automotive-grade microcontroller -> embedded controller -> semiconductor IC. It uses the S12 instruction set, derived from the Motorola 68HC12 architecture, with BDM (Background Debug Mode) and on-chip single-wire debug support. Key features include 91 general-purpose I/O lines, a Phase-Locked Loop (PLL) based clock generator, a periodic interrupt timer, a real-time interrupt, a watchdog timer, and an external interrupt request block. The wide operating voltage range of 2.97 V to 5.5 V supports both 3.3 V and 5 V automotive electrical environments, and the -40C to +85C (or +105C depending on speed grade) industrial operating temperature range makes it suitable for under-hood and chassis-mounted electronic control units. The HCS12 core implements a 16-bit accumulator-based CISC architecture with a 20-bit ALU and a programmable memory map, offering efficient peripheral integration. The dual SCI blocks enable simultaneous OBD-II diagnostics and gateway communication, while the two 10-bit ADCs allow redundant sensor sampling. The on-chip CAN module is compliant with the Bosch CAN 2.0A/B standard, which is critical for in-vehicle networking. Typical applications include body control modules (BCM), instrument clusters, door/window/liftgate modules, HVAC controllers, immobilizers, and CAN nodes in vehicle multiplexing networks. The device is also commonly used in industrial automation nodes where CAN-based distributed control is required. When designing with this part, ensure the 5V-tolerant I/O configuration matches the target bus levels, and verify the oscillator and PLL settings against the latest NXP errata documents for the mask set in production. Decoupling capacitors of 100 nF per VDD pair and bulk 4.7 µF near the package are recommended for automotive EMC compliance.

Cotización Contacto
MC9S12DG256MFUE - 16-bit HCS12 MCU, 256KB Flash, 80-QFP | NXP
MC9S12DG256MFUE

MC9S12DG256MFUE - 16-bit HCS12 MCU, 256KB Flash, 80-QFP | NXP

The NXP Semiconductors MC9S12DG256MFUE is a 16-bit HCS12 CISC microcontroller with 256 KB of on-chip Flash, 12 KB RAM, and 4 KB EEPROM, housed in an 80-pin LQFP (QFP-80) package qualified to AEC-Q100 for automotive multiplexing. It operates at up to 25 MHz core frequency from a single 5 V supply and integrates two asynchronous SCI channels, two SPI, one I2C, an 8-channel 10-bit ADC, an 8-channel enhanced capture timer, PWM outputs, and a CAN 2.0 module. The device targets body and chassis ECUs that demand deterministic interrupt response, on-chip memory for bootloader and calibration routines, and a wide peripheral set without external glue logic. A CISC microcontroller (Complex Instruction Set Computer) is a CPU architecture that uses a rich, variable-length instruction set optimized for code density and per-instruction work; the HCS12 family is the 16-bit evolution of the HC08 line, retaining the same M68HC12 instruction set while adding a wider 16-bit datapath, an enhanced indexed addressing mode, and a higher bus bandwidth. Microcontrollers sit at the lowest tier of the compute hierarchy (microcontroller -> embedded processor -> MPU) and are the workhorse of real-time control loops where latency, determinism, and integration matter more than raw throughput. Key features include BDM (Background Debug Mode) and a serial monitor for non-intrusive in-circuit debugging, an external bus interface for memory expansion, an XGate co-processor channel on related family members, and a 32-bit timer for precise event timing. The on-chip EEPROM simplifies parameter storage, while the flash controller supports in-application reprogramming for field firmware updates. The CAN 2.0 A/B module includes 15 message buffers and hardware filtering for offloading the CPU in OSEK/VDX-based automotive stacks. Typical applications include automotive body controllers, instrument clusters, HVAC modules, door/zone ECUs, and industrial PLC-style controllers. The wide AEC-Q100 grade-1 temperature range and the CAN/SPI/SCI mix make the part attractive for any automotive network node that needs non-volatile storage of calibration data. When designing with this MCU, ensure the 5 V rail is clean and decoupled with 100 nF ceramic + 10 uF bulk capacitors within 25 mm of the VDD/VSS pins. The oscillator loop has tight layout requirements; keep the crystal traces short and guarded by a ground ring. Refer to the manufacturer datasheet for background-debug, mode-of-operation, and PLL configuration guidance before bringing up code.

Cotización Contacto