Microcontroladores

Productos (20.000+)

MC9S12C32MFAE25 - 16-bit HCS12 MCU 32KB Flash 25MHz | NXP
MC9S12C32MFAE25

MC9S12C32MFAE25 - 16-bit HCS12 MCU 32KB Flash 25MHz | NXP

The NXP Semiconductors MC9S12C32MFAE25 is a 16-bit HCS12 microcontroller with 32KB (32K x 8) flash memory, a 25 MHz bus clock, and a 48-pin LQFP (7x7 mm) package. It belongs to the S12C family of flash-based MCUs for general-purpose industrial and automotive network applications. A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals on one die. The HCS12 (S12) family is built around the CPU12 CISC core, a 16-bit architecture widely deployed in automotive body electronics and industrial control. MCUs sit at the top of the embedded hierarchy: semiconductor -> integrated circuit -> microcontroller unit -> application-specific embedded controller. Key features include 32KB of flash program memory for code storage, an on-chip phase-locked loop (PLL) that allows flexible bus frequency synthesis up to 25 MHz, and an integrated bandgap-based voltage regulator (Vreg) that generates the internal VDD supply from a 2.97 V to 5.5 V external supply range. This wide supply range simplifies power design in 3.3 V and 5 V mixed systems. The MC9S12C32MFAE25 carries an automotive temperature grade (-40C to +125C) and comes supplied in a tray pack. The LFQFP gull-wing package supports surface-mount assembly and provides 48 I/O-capable terminals for connecting on-chip peripherals such as timers, serial interfaces (SCI, SPI), and the 10-bit ADC reported by distributors. Typical applications include automotive body and network nodes, industrial control panels, motor-adjacent monitoring logic, and general-purpose embedded systems where a 16-bit core and modest flash are sufficient. Design consideration: since the part is NRND (Not Recommended for New Designs) per NXP, new designs should evaluate the recommended successors or pin-compatible S12 family members listed below. This page adds distributor pricing, drop-in same-family alternatives, comparison tables, and design notes not consolidated in the manufacturer datasheet.

Cotización Contacto
MC9S12C32MFUE25 - 16-bit HCS12 MCU 25MHz 32KB Flash | NXP
MC9S12C32MFUE25

MC9S12C32MFUE25 - 16-bit HCS12 MCU 25MHz 32KB Flash | NXP

The NXP MC9S12C32MFUE25 is a 16-bit HCS12 microcontroller IC operating at up to 25 MHz with 32 KB of flash memory (32K x 8), housed in an 80-pin QFP (14 x 14 mm) package. It belongs to the S12C family of flash-based MCUs for general-purpose industrial and automotive network applications. A 16-bit microcontroller is a complete computer-on-a-chip that processes data in 16-bit words, combining a CPU core, memory, and peripherals such as timers, serial interfaces, and analog-to-digital converters within a single device. Within the semiconductor hierarchy, the MC9S12C32 sits under microcontrollers -> embedded processors -> integrated circuits, and within NXP's HCS12 (S12) architecture descended from the CPU12 core originally developed by Motorola and later Freescale Semiconductor. Key features include the HCS12 CISC core running at a 25 MHz bus frequency, 32 KB of on-chip flash program memory supporting in-system reprogramming, CANbus connectivity for automotive and industrial networks, an external bus interface (EBI/EMI), and SCI serial communication. The device operates from a 2.5V/5V supply scheme typical of the 5V-tolerant S12 family, giving strong noise immunity in electrically harsh environments. Architecturally, the S12C family leverages NXP's market-leading flash technology to deliver the power and flexibility of the 16-bit CPU12 core to cost- and space-sensitive designs, with the 80-pin option providing the largest I/O and peripheral expansion within the 48/52/80-pin S12C family lineup. Typical applications include body control modules and ECU nodes on automotive CAN networks, industrial control and automation controllers, and general-purpose embedded systems that benefit from 5V operation and 16-bit processing headroom. A key design consideration is lifecycle status: NXP lists this part as NRND (Not Recommended for New Designs), so new designs should evaluate S12G or S12XE successors, while existing designs can continue sourcing for maintenance. This page synthesizes distributor inventory data, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, with pricing and stock as of 2026-10-18.

Cotización Contacto
MC9S12C32MPBE16 - 16-Bit HCS12 MCU, 32KB Flash, 52-LQFP | NXP
MC9S12C32MPBE16

MC9S12C32MPBE16 - 16-Bit HCS12 MCU, 32KB Flash, 52-LQFP | NXP

The NXP Semiconductors MC9S12C32MPBE16 is a 16-bit HCS12 CISC microcontroller with 32KB of on-chip Flash program memory, 2KB of RAM, and a 16 MHz CPU12 core, housed in a 52-pin LQFP package (10x10 mm) supplied in tray packaging. According to the NXP datasheet, this member of the MC9S12C-Family targets cost- and space-sensitive general-purpose industrial and automotive network applications, offering 35 I/O pins and an internal oscillator. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), and a rich set of programmable peripherals on one silicon die. The HCS12 family sits in the broader hierarchy: HCS12 -> 16-bit CISC microcontroller -> Freescale/NXP automotive MCU lineage -> embedded microcontroller -> semiconductor. The CPU12 core executes an instruction set that is opcode-compatible with the legacy 68HC11 and 68HC12 architectures, simplifying code reuse across product generations. Key features of the MC9S12C32MPBE16 include 32KB (32K x 8) of Flash, 2KB (2K x 8) of RAM, 35 programmable I/O lines, an integrated oscillator that eliminates the need for an external crystal in many designs, and a multi-channel 16-bit timer module. The device operates from a 2.5V/5V supply and supports in-application programming for field firmware updates. From an architectural perspective, the MC9S12C32MPBE16 leverages Freescale/NXP's proven flash technology and a C-optimized instruction set that produces extremely compact code. The 16 MHz bus clock delivers sufficient throughput for motor control, body-electronics, and sensor-fusion tasks while maintaining very low active power. Integrated peripherals include a CAN module (MSCAN), an SPI-compatible serial peripheral interface, a synchronous serial communication module (SCI), and a 10-bit analog-to-digital converter. Typical applications for the MC9S12C32MPBE16 include automotive body controllers, HVAC modules, industrial sensor-interface boards, and low-cost CAN-node endpoints. The combination of small package, internal oscillator, and CAN support makes it especially attractive for distributed ECUs where PCB area and BOM cost are at a premium. When designing with this device, ensure the BKGD pin is accessible for in-circuit debugging and Flash programming through the standard BDM (Background Debug Mode) interface. Plan the PCB layout so the VDD/VSS pin pair carries a low-impedance decoupling network of 0.1 uF and 4.7 uF capacitors placed within 5 mm of the package. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
MC9S12C32MPBE25 - 16-bit HCS12 MCU, 32KB Flash, 25MHz | NXP
MC9S12C32MPBE25

MC9S12C32MPBE25 - 16-bit HCS12 MCU, 32KB Flash, 25MHz | NXP

The NXP Semiconductors MC9S12C32MPBE25 is a 16-bit HCS12 (S12C family) microcontroller with 32KB of flash program memory, a maximum bus frequency of 25MHz, and an integrated PLL, housed in a 52-pin TQFP (10x10mm) package. A microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory, data memory, and peripherals such as timers, serial interfaces, and analog-to-digital converters on one die. The HCS12 family, originally developed by Motorola and Freescale Semiconductor and now part of NXP, sits within the broader 16-bit MCU hierarchy and descends from the widely deployed 68HC12 architecture, making it a mainstay in automotive body electronics and industrial control. Key features of the MC9S12C32MPBE25 include the CPU12 CISC core running at up to 25MHz, 32KB (32K x 8) of on-chip flash, and an on-chip bandgap-based voltage regulator (Vreg) that generates the internal digital supply (VDD) from a 2.97V to 5.5V external supply range. The included phase-locked loop (PLL) allows flexible clock scaling from a low-cost external crystal, trading bus speed against EMI and power. Architecturally, the device is a CMOS design in the S12C product series, packaged per JEDEC-style designation S-PQFP-G52 with a 0.65mm terminal pitch. The flash-based family covers 48, 52, and 80-pin options, so designs can scale memory and I/O count without changing toolchains. Typical applications include general-purpose industrial control, automotive network nodes, and cost- and space-sensitive embedded systems where a 16-bit core, modest flash, and robust I/O drive are sufficient. Design consideration: because the part is NRND (Not Recommended for New Designs) per the NXP product page, new designs should evaluate newer S12 family members while existing designs use this page for sourcing and replacement planning. This page synthesizes distributor availability, lifecycle status, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto
MC9S12C32VFAE16 - 16-Bit HCS12 MCU, 32KB Flash, 48-LQFP | NXP
MC9S12C32VFAE16

MC9S12C32VFAE16 - 16-Bit HCS12 MCU, 32KB Flash, 48-LQFP | NXP

The NXP Semiconductors MC9S12C32VFAE16 is a 16-bit microcontroller from the S12C family, built on the HCS12 (CPU12) core and integrating 32KB of on-chip Flash and 2KB of RAM in a 48-pin LQFP (7x7 mm) package. Operating from a 2.97 V to 5.5 V external supply, the device runs at up to 16 MHz bus speed and supports 31 general-purpose I/O lines with an internal oscillator plus an on-chip PLL for flexible clock generation. The part carries the VFAE16 ordering suffix that denotes the 48-LQFP package and 16 MHz speed grade. A 16-bit microcontroller (MCU) is a single-chip computer that combines a CPU, memory, and peripheral set on one die. The HCS12 (also called CPU12) is NXP/Freescale's enhanced 16-bit CISC core that adds indexed addressing and improved instructions over the original HC11 architecture. Within NXP's MCU taxonomy, the MC9S12C32 belongs to the S12C sub-family, a cost-optimized member of the broader S12X/S12/S12XE family that targets general-purpose industrial and automotive body network nodes where 8-bit MCUs lack throughput but full S12XE peripherals would be overkill. Key features of the MC9S12C32VFAE16 include 32KB Flash program memory arranged as 32K x 8, 2KB of static RAM, an integrated CAN 2.0 A/B controller (msCAN) for in-vehicle or industrial networking, an 8-channel 10-bit ADC, an Enhanced Capture Timer (ECT), PWM timers, SPI and SCI (UART) serial interfaces, and a built-in bandgap-based voltage regulator that derives the internal core supply from the external 5V rail. The 48-LQFP package provides a compact footprint and supports an operating temperature range of -40C to +105C or -40C to +125C depending on the specific test condition. Architecturally, the part uses a von Neumann 16-bit CISC core with two accumulator/index register pairs, immediate, extended, indexed, and relative addressing modes, and a single-wire background debug mode (BDM) interface for non-intrusive in-system programming. The 5V-tolerant I/O simplifies integration in 5V digital systems without level shifters, and the internal regulator removes the need for an external 1.8V or 2.5V LDO. Typical applications include automotive body controllers (BCM), HVAC control panels, instrument cluster sub-modules, seat control ECUs, industrial sensor nodes, and CAN-based distributed I/O. The part is also a frequent choice in LIN-to-CAN bridges when paired with an external LIN transceiver. When designing with the MC9S12C32VFAE16, ensure the BDM interface (BKGD, MODC, RESET*) is brought out to a debug header for production programming and field firmware updates, and observe the 5V supply decoupling layout specified in the S12C reference manual to keep ADC readings clean. This page synthesizes distributor pricing, NRND lifecycle notes, verified 48-LQFP drop-in alternatives from the same S12C family, and practical design guidance not found in the standalone manufacturer datasheet.

Cotización Contacto
MC9S12C32VFAE25 - 16-bit HCS12 MCU, 32KB Flash, 25MHz | NXP
MC9S12C32VFAE25

MC9S12C32VFAE25 - 16-bit HCS12 MCU, 32KB Flash, 25MHz | NXP

The NXP MC9S12C32VFAE25 is a 16-bit HCS12 (S12C family) flash microcontroller delivering 25MHz core speed, 32KB of on-chip flash program memory, 2KB of RAM, and 31 general-purpose I/O lines in a 48-pin LQFP (7x7 mm) surface-mount package. A microcontroller (MCU) is a single integrated circuit that combines a processor core, program memory, data memory, and peripherals such as timers, serial communication modules, and analog interfaces. The MC9S12C32 belongs to the 16-bit microcontroller class and is opcode-compatible with the legacy 68HC11 and 68HC12 architectures, placing it within the broader embedded processor hierarchy used across industrial control and automotive network nodes. Key features include a C-optimized HCS12 CPU core producing extremely compact code, 32KB (32K x 8) flash program memory with in-application programmability, 2KB (2K x 8) RAM, and an internal oscillator that reduces external component count. The family description cites 48/52/80-pin flash-based options, giving designers pin-count scalability within one platform. The device integrates an on-chip bandgap-based voltage regulator (Vreg) that generates the internal digital supply (VDD) from an external supply range of 2.97V to 5.5V, and a phase-lock loop (PLL) circuit that lets the 25MHz bus frequency be synthesized from a low-frequency reference crystal, minimizing EMI. The 48-LQFP package with 31 I/O provides a dense but hand-solderable footprint for moderate-complexity nodes. Typical applications include automotive body and network modules, industrial control systems, and general-purpose embedded controllers where 16-bit performance and 32KB flash are sufficient. According to NXP product documentation, the S12C family targets general-purpose industrial and automotive network applications. Design consideration: because this part is listed as NRND (Not Recommended for New Designs) on the NXP product page, new designs should evaluate newer S12G/S12XE family members or a second-source strategy; existing designs can rely on Rochester Electronics for continued supply. This page synthesizes distributor pricing context, drop-in family alternatives, lifecycle status, and practical design notes not consolidated in the manufacturer datasheet.

Cotización Contacto
MC9S12C64CFUE - 16-bit HCS12 MCU, 64KB Flash, 80-QFP | NXP
MC9S12C64CFUE

MC9S12C64CFUE - 16-bit HCS12 MCU, 64KB Flash, 80-QFP | NXP

The NXP Semiconductors MC9S12C64CFUE is a 16-bit HCS12 microcontroller (MCU) from the S12C family, integrating 64 KB of on-chip Flash, 4 KB RAM, and a 25 MHz CPU12 core in an 80-pin LQFP (QFP 80, 14x14 mm) package. The device is designed for general-purpose industrial and automotive body network applications, offering a wide 2.97 V to 5.5 V single-supply operating range with an internal bandgap voltage regulator (Vreg) that generates the internal digital supply (VDD). A 16-bit microcontroller is a CPU class that processes data and addresses in 16-bit words, sitting between 8-bit MCUs (lower cost, simpler control) and 32-bit MCUs (higher performance, richer peripherals). The HCS12 family is NXP's (formerly Freescale/Motorola) line of 16-bit CISC microcontrollers with enhanced peripherals, on-chip Flash, and BDM (Background Debug Mode) for in-circuit programming. The S12C family specifically targets cost- and space-sensitive industrial and automotive body networks where CAN connectivity and robust peripheral integration matter more than raw CPU throughput. Key features of the MC9S12C64CFUE include up to 50 MHz bus clock via an internal PLL, an enhanced 8-channel 10-bit ADC, up to 31 digital I/O ports, multiple timers (ECT 16-bit, 8-bit PWM, periodic interrupt), a serial peripheral interface (SPI), two SCI (UART) channels, and a 1 Mbyte/sec CAN 2.0 A/B controller. An on-chip bandgap-based voltage regulator supports a 2.97 V to 5.5 V external supply, and the part supports a single-wire BDM debug interface for development and field programming. Architecturally the S12C integrates the CPU12 core, Flash with EEPROM-like byte-erase and security features, RAM, a phase-locked loop (PLL), and peripheral logic on a single chip. The PLL allows the bus clock to be derived from a low-frequency external crystal, reducing EMI and BOM cost. The 25 MHz HCS12 instruction cycle and integrated peripherals make it well suited for real-time control loops in body-electronics modules and small industrial nodes. Typical applications include automotive body control modules (BCM), instrument clusters, HVAC controllers, seat and mirror controllers, industrial CAN nodes, sensor interfaces, and low-end motor control. The device balances 16-bit performance, on-chip Flash and CAN 2.0 in a compact LQFP-80 footprint, which is useful for cost-sensitive designs that still need networked communication. When designing with this part, ensure the external 2.97 V to 5.5 V supply is decoupled close to the VDD/VSS pins and that the PLL filter network follows the datasheet reference design. Note that this part is NRND (Not Recommended for New Designs) per NXP - existing designs may continue to source it, but new programs should evaluate active S12K or S32K successors. This page synthesizes distributor pricing, parametric specifications, and drop-in alternatives for the MC9S12C64CFUE that are not consolidated in the manufacturer datasheet.

Cotización Contacto
MC9S12C64MFAE - 16-bit HCS12 MCU, 64KB Flash, 25MHz | NXP
MC9S12C64MFAE

MC9S12C64MFAE - 16-bit HCS12 MCU, 64KB Flash, 25MHz | NXP

The NXP Semiconductors MC9S12C64MFAE is a 16-bit microcontroller unit (MCU) based on the HCS12 (S12C) CISC core, delivering 64KB (64K x 8) of on-chip Flash program memory at speeds up to 25MHz, housed in a 48-pin LQFP (7x7 mm) package. It integrates CANbus, EBI/EMI, SCI, and SPI connectivity, with on-chip peripherals including POR, PWM, and WDT. A microcontroller is a single-chip computer that combines a processor core, program memory, data RAM, and peripherals on one die. Within the semiconductor hierarchy, the MC9S12C64MFAE sits at the 16-bit MCU level, part of NXP's (formerly Freescale/Motorola) HCS12 family, which evolved from the industry-standard 68HC11 architecture. The S12C sub-family targets cost- and space-sensitive general-purpose industrial and automotive networked applications. Key differentiating features include the on-chip bandgap-based voltage regulator (Vreg) that generates the internal digital supply (VDD) from a wide external supply range of approximately 2.97V to 5.5V, a PLL circuit that lets the CPU run faster than the external crystal frequency, and 31 GPIO lines. These traits simplify board design and reduce external component count. Technically, the CPU12 CISC core executes efficient 16-bit code with rich addressing modes, while the Flash memory supports in-system reprogramming for field updates. The 4K x 8 of on-chip RAM (per datasheet listings) supports buffers for the CAN and SCI stacks. The integrated MSCAN module and standard SCI/SPI serial interfaces make networked node design straightforward. Typical applications include automotive body and network modules (CAN nodes), industrial control panels, motor control boards, and general-purpose embedded controllers where a 16-bit core with Flash and CAN is required. Design consideration: confirm the operating supply range against the specific datasheet revision, as distributor listings show both 2.5V-class and 5V-class references; the on-chip Vreg typically supports the 2.97V to 5.5V external range. This page synthesizes distributor pricing, drop-in S12-family alternatives, and practical design notes not found in the manufacturer datasheet, as of 2026-10-18.

Cotización Contacto
MC9S12C64MFUE - 16-bit HCS12 MCU 64KB Flash QFP-80 | NXP
MC9S12C64MFUE

MC9S12C64MFUE - 16-bit HCS12 MCU 64KB Flash QFP-80 | NXP

The NXP MC9S12C64MFUE is a 16-bit HCS12 CISC microcontroller with 64 KB on-chip Flash, 4 KB RAM and 1 KB EEPROM, packaged in an 80-pin LQFP (QFP-80). The S12C family is part of NXP's 48/52/80-pin flash MCU line intended for cost- and space-sensitive industrial and automotive network applications, with the CPU12 core delivering mature 16-bit performance at bus speeds up to 25 MHz and a 50 MHz internal clock. An HCS12 microcontroller (MCU) is a 16-bit flash-based embedded processor that combines a CPU12 core with on-chip peripherals, analog modules and memory in a single chip. HCS12 sits in the hierarchy: HCS12 -> 16-bit MCU -> microcontroller -> embedded processor -> semiconductor. Compared with 8-bit MCUs the 16-bit datapath offers higher code density per MHz; compared with 32-bit Cortex-M parts the HCS12 is typically chosen for legacy automotive body and network nodes where the 16-bit toolchain and S12 software base are already deployed. The MC9S12C64MFUE integrates an on-chip bandgap-based voltage regulator that derives the internal VDD from a 2.97 V to 5.5 V external supply, supporting both 3.3 V and 5 V systems without external regulation. The device includes a PLL for flexible clock generation from a wide range of external references, and an SCI, SPI and IIC/CAN communication block set targeting CAN-based automotive body controllers and LIN (LIN) sub-networks. 31 general-purpose I/O ports on the 80-pin package provide ample connectivity for sensor aggregation, while the 64 KB program Flash supports mid-sized application stacks with in-application reprogramming via the BDM interface. The HCS12 CISC architecture uses variable-length instructions and dedicated addressing hardware to maximise code density, allowing 64 KB of Flash to host feature-rich automotive body and industrial control applications. The integrated voltage regulator plus PLL simplify BOM cost by removing the need for an external analog supply chain, and the 80-pin LQFP package offers a low-cost plastic footprint compatible with reflow-through-in-place assembly. The part also includes background debug mode (BDM) for non-intrusive in-circuit emulation and flash programming. Typical applications include CAN/LIN body control modules, instrument clusters, automotive HVAC and seat controllers, industrial sensor hubs, RS-232/RS-485 networked sensors, and small appliance control boards. The wide 2.97 V to 5.5 V supply range allows direct connection to 5 V sensors and 12 V automotive rails after external regulation. The 64 KB Flash / 4 KB RAM memory mix suits tasks that need protocol stacks plus application logic but do not require the headroom of 128 KB-class S12C12 parts. When designing with the MC9S12C64MFUE, ensure the external VDD decoupling network follows the datasheet reference layout, with 100 nF + 4.7 µF placed within 5 mm of the supply pins. The PLL loop-component values must match the chosen reference oscillator; incorrect Rs/Cs will prevent lock and the part will run on the unmultiplied bus rate. Leave the BDM pins accessible for production programming and field firmware updates. Note: this part is marked NRND by NXP - plan last-time-buy if your product lifecycle exceeds 2027. This page synthesises distributor pricing, drop-in same-package alternatives within the S12C family, and practical hardware-design notes that complement the manufacturer datasheet for engineers evaluating the MC9S12C64MFUE for new designs or legacy maintenance.

Cotización Contacto
MC9S12C64MPBE - 16-bit HCS12 MCU, 64KB Flash 25MHz | NXP
MC9S12C64MPBE

MC9S12C64MPBE - 16-bit HCS12 MCU, 64KB Flash 25MHz | NXP

The NXP Semiconductors MC9S12C64MPBE is a 16-bit HCS12 (S12C family) flash microcontroller running at up to 25 MHz bus frequency with 64KB of on-chip flash memory and 4KB of RAM, housed in a 52-pin LQFP (TQFP, 10x10 mm) surface-mount package. It integrates CAN and SCI serial communication interfaces, making it a compact single-chip control solution for networked embedded systems. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals into one chip, sitting at the heart of embedded control systems. The S12C belongs to the broader 16-bit microcontroller family tree: HCS12 core -> CPU12 CISC architecture -> S12 platform -> NXP (formerly Freescale, originally Motorola) automotive and industrial MCU portfolio. Flash-based 16-bit MCUs like this one replaced masked-ROM predecessors by allowing field reprogramming. Key features include the 25 MHz HCS12 CPU12 core, 64KB (64K x 8) flash program memory, an on-chip CAN 2.0 controller for in-vehicle and industrial networks, multiple SCI (serial communication interface) UARTs, an 8-channel 10-bit ADC, and a wide operating supply derived from the 5V nominal system with on-chip voltage regulation (2.5V/5V internal domains). The MPBE speed suffix denotes the 25 MHz grade in the commercial temperature range. Technically, the device is based on Motorola/NXP flash technology with a CISC CPU12 instruction set, background debug mode (BDM) for non-intrusive development, and a phase-locked loop (PLL) clock system that lets designers trade core speed against EMC and power. Peripheral set includes periodic interrupt timer, pulse-width modulator channels, and standard S12 bus interfaces. Typical applications are automotive body and convenience modules (door, seat, lighting controllers), CAN-networked industrial nodes, building control, and general-purpose embedded systems where a 52-pin footprint and 64KB flash are sufficient. Design consideration: verify lifecycle status before new designs - NXP lists this part as NRND (Not Recommended for New Designs), so new projects should target pin-compatible S12G/S12XE successors. This page synthesizes distributor availability, drop-in family alternatives, lifecycle status, and practical design notes not consolidated in the manufacturer datasheet.

Cotización Contacto
MC9S12C64VFAE - 16-Bit HCS12 MCU, 64KB Flash, LQFP-48 | NXP
MC9S12C64VFAE

MC9S12C64VFAE - 16-Bit HCS12 MCU, 64KB Flash, LQFP-48 | NXP

The NXP Semiconductors MC9S12C64VFAE is a 16-bit microcontroller from the S12C family featuring an HCS12 CPU core, 64KB of on-chip Flash memory, and a 48-pin LQFP (7x7 mm) package with HCS12 architecture delivering 25 MHz bus performance for cost-sensitive automotive and industrial network applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), and a rich set of peripheral interfaces such as timers, ADCs, communication ports, and general-purpose I/O. The HCS12 family sits in the 16-bit microcontroller tier of NXP's automotive product tree: HCS12 CPU -> S12C sub-family -> 16-bit MCU -> automotive microcontroller -> embedded processor -> semiconductor. The 16-bit data path gives a meaningful step up from 8-bit MCUs in code density, arithmetic performance, and peripheral integration while keeping peripheral programming simple. Key features of the MC9S12C64VFAE include 64KB of Flash program memory, 4KB of RAM, 31 general-purpose I/O pins, an on-chip bandgap-based voltage regulator that derives the core VDD from a 2.97V to 5.5V external supply, an integrated phase-locked loop (PLL) for flexible clocking, multiple serial communication interfaces (SCI, SPI), timers, an 8/10-bit ADC, and a CAN 2.0 A/B controller for in-vehicle networking. The device supports background debug mode (BDM) for non-intrusive in-circuit development. The S12C architecture uses a 16-bit HCS12 core with a Von Neumann bus and a unified memory map, simplifying C-code development with NXP's CodeWarrior and the newer S32 Design Studio toolchains. The on-chip voltage regulator allows operation from a single 5V automotive rail while generating the lower core voltage internally, reducing BOM cost and PCB complexity. Typical applications include body electronics controllers (door modules, seat controllers, mirror modules), CAN node endpoints in automotive networks, industrial sensor hubs, HVAC controllers, lighting controllers, general-purpose 16-bit control, and appliance control boards that benefit from automotive-grade peripherals such as CAN and a wide supply range. When designing with the MC9S12C64VFAE, place the four VDD/VSS bulk capacitors specified in the datasheet close to their respective pins to ensure stable regulator operation. Always use the BDM interface for firmware development; the BDM pinout is part of the 48-pin LQFP pinmap and must be reserved for programming/debug access. This page synthesizes distributor pricing, drop-in alternatives drawn from the same NXP S12C family and other sources, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
MC9S12C64VFUE - HCS12 16-Bit MCU, 64KB Flash, 80-QFP | NXP
MC9S12C64VFUE

MC9S12C64VFUE - HCS12 16-Bit MCU, 64KB Flash, 80-QFP | NXP

The NXP MC9S12C64VFUE is a 16-bit HCS12 microcontroller with 64KB on-chip Flash, 25 MHz CPU core, and an 80-pin LQFP (14x14 mm) package, designed for general-purpose industrial and automotive network applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), and a rich set of peripherals including timers, ADC, communication interfaces, and GPIO. Within the embedded-system taxonomy, an MCU sits below microprocessors (which need external RAM/ROM) and above simple logic ICs. The HCS12 family from NXP is a 16-bit CISC architecture widely adopted in automotive body, chassis, and body-control applications because of its deterministic interrupt latency, on-chip CAN, and robust Flash endurance. Key features of the MC9S12C64VFUE include 64KB of Flash program memory, 4KB of RAM, an integrated CAN 2.0 A/B controller (MSCAN), an 8-channel 10-bit ADC, multiple timer modules (TIM/PWM/ECT), SPI and SCI/UART serial interfaces, an on-chip bandgap voltage regulator for a single 5V (or 3.3V) external supply, and a phase-locked loop (PLL) that lets the bus clock scale from the internal reference. The part supports background-debug (BDM) and is offered in an 80-pin LQFP. Typical applications include automotive body controllers, instrument clusters, HVAC control modules, CAN node endpoints, industrial sensor hubs, and small motor-control boards. The 64KB Flash, multi-channel PWM, and integrated CAN make it especially useful in distributed automotive networks where the MCU terminates a CAN bus, drives FET drivers, and reads sensor inputs. Industrial designers also adopt it for low-cost PLC I/O modules and remote telemetry. When designing with this part, choose decoupling per NXP AN2404, place the 5V decoupling within 5 mm of VDD/VSS pins, follow the recommended oscillator layout, and reserve the BKGD pin for in-circuit debug. The V suffix in the MPN (VFUE) denotes the 80-pin LQFP industrial temperature grade (-40C to +85C). This page synthesizes distributor pricing, drop-in same-package alternatives, pinout, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
MC9S12C96CFAE557 - 16-Bit 96KB Flash HCS12 MCU 48-LQFP | NXP
MC9S12C96CFAE557

MC9S12C96CFAE557 - 16-Bit 96KB Flash HCS12 MCU 48-LQFP | NXP

The NXP MC9S12C96CFAE557 is a 16-bit HCS12-family microcontroller with 96 KB of on-chip Flash, 4 KB RAM and 1 KB EEPROM, packaged in a 48-pin LQFP (7x7 mm, 0.5 mm pitch). It runs the CPU12 core at up to 25 MHz from a 2.97 V to 5.5 V supply and integrates a 10-bit ADC, up to six PWM channels, two SCI, one SPI, one I2C, and a CAN 2.0 A/B module for industrial and automotive network nodes. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (Flash/ROM), volatile working memory (RAM), and a set of programmable peripherals onto one die. The HCS12 core family occupies the 16-bit microcontrollers niche - wider data paths and richer instruction sets than 8-bit MCUs while remaining simpler, lower power, and easier to use than 32-bit ARM Cortex-M parts. In the broader taxonomy: microcontroller -> embedded processor -> semiconductor -> integrated circuit. Flash-based HCS12 devices are commonly used where deterministic interrupt latency and on-chip CAN are required. Key features of the MC9S12C96CFAE557 include 96 KB Flash with security and in-application programming support, 1 KB EEPROM for data logging, an internal bandgap voltage regulator that derives the core 2.5 V from the external 5 V rail, a phase-locked-loop (PLL) for flexible bus-clock generation, a background debug mode (BDM) interface for non-intrusive debug, and an on-chip CAN 2.0 A/B controller with hardware filtering. The 48-LQFP package exposes 31 general-purpose I/O lines and supports automotive ambient grades of -40C to +125C. The device uses a Harvard-style 16-bit CPU12 core with an enhanced instruction set (including fuzzy logic and table-lookup instructions) that simplifies encoder/decoder and control-loop code. The integrated CAN module eliminates external controller chips, and the bandgap regulator plus on-chip POR/BOR circuits simplify power-tree design in distributed nodes such as sensor clusters, body controllers and seat modules. Typical applications include CAN node endpoints in vehicle body and chassis networks, LIN-to-CAN bridges, industrial CANopen and DeviceNet slave stations, HVAC fan and blower controllers, and general-purpose 16-bit control boards that require Flash with field-upgrade capability. Design with this part by keeping the external supply between 3.0 V and 5.5 V and using a 100 nF decoupling cap on each VDD/VSS pair. The CAN bus requires a TJA1050 or similar transceiver; the MCU CAN TX/RX pins are not 5 V bus-tolerant and must not be wired directly to a CANH/CANL cable. This page consolidates distributor pricing, drop-in alternatives, and design notes specific to the MC9S12C96CFAE557, complementing the manufacturer datasheet with selection and lifecycle context.

Cotización Contacto
MC9S12C96CFUE - 16-Bit 25MHz 96KB Flash MCU | NXP
MC9S12C96CFUE

MC9S12C96CFUE - 16-Bit 25MHz 96KB Flash MCU | NXP

The NXP Semiconductors MC9S12C96CFUE is a 16-bit HCS12 microcontroller rated at 25 MHz, with 96 KB of flash memory and an 80-pin LQFP package measuring 14 x 14 mm. According to the NXP product page, its S12C family architecture targets general-purpose industrial and automotive network applications, while the on-chip bandgap voltage regulator supports a 2.97 V to 5.5 V external supply range. A microcontroller, or MCU, is a compact embedded processor that integrates a CPU core, program memory, data memory, peripherals, and I/O on one semiconductor. An HCS12 MCU belongs to the embedded processor and controller hierarchy, where firmware executes real-time control tasks. The MC9S12C96CFUE combines a 16-bit data bus and flash-based program storage in a surface-mount package suitable for established control-system designs. The verified listing identifies a 16-bit HCS12 core, 25 MHz maximum clock, and 96 KB flash. NXP further states that the family includes a phase-lock loop circuit and an internal bandgap-based regulator. These features support clock-based control and internally regulated digital operation, although detailed peripheral counts and memory-map information must be confirmed in the manufacturer data sheet before design release. The 80-pin package supports a larger pin budget than smaller S12C members and is intended for automotive networking, industrial controllers, communication modules, and embedded gateways. The exact package suffix, electrical limits, pin multiplexing, programming connectors, and production status should be checked against the current NXP documentation, especially because the official product page marks this exact orderable MPN as NRND. A key sourcing consideration is lifecycle risk. NRND means the part is not recommended for new designs, while it may remain available for existing supported programs. Buyers should therefore treat MC9S12C96CFUE as a lifecycle-constrained sourcing choice rather than the default choice for a new design unless continuity of an established platform is required. This page consolidates the verified NXP and distributor facts, clarifies the NRND lifecycle decision, and separates confirmed specifications from data that still requires datasheet review. For a robust embedded design, validate pin multiplexing, timing, memory maps, electrical characteristics, package drawing, and software migration requirements directly with NXP before schematic approval.

Cotización Contacto
MC9S12C96MFAE - 16-bit HCS12 MCU, 96KB Flash, 48-LQFP | NXP
MC9S12C96MFAE

MC9S12C96MFAE - 16-bit HCS12 MCU, 96KB Flash, 48-LQFP | NXP

The NXP MC9S12C96MFAE is a 16-bit HCS12 microcontroller with 96KB on-chip Flash, 4KB RAM, and a 25MHz CISC core, housed in a 48-pin LQFP (7x7 mm) package. It integrates a CAN 2.0 controller, SCI/SPI serial interfaces, PWM channels, and a watchdog timer, targeting cost-sensitive automotive body and industrial network nodes. The 2.97V to 5.5V single-supply operation with an internal bandgap voltage regulator simplifies board design versus parts needing multiple rails. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash/ROM), working memory (RAM), and a rich set of programmable peripherals. The HCS12 family is a 16-bit CISC architecture that evolved from the original Motorola/Freescale HC12, providing deterministic interrupt latency, a background debug mode (BDM) interface, and a CPU12 instruction set that is largely object-code compatible with the older HC11. Within the broader taxonomy, the HCS12 sits under 16-bit MCU -> microcontroller -> embedded processor -> semiconductor. The S12C sub-family is the cost-optimized tier within HCS12, sharing the same peripheral IP with the higher-pin S12G/S12P families while trimming 12 layers to the minimum footprint for LIN/CAN edge nodes. Key features include 31 GPIO lines, an on-chip PLL for flexible bus-clock generation from an external crystal or resonator, a 16-channel 10-bit ADC, an 8-channel PWM module, and a CAN 2.0A/B controller compatible with DeviceNet and CANopen stacks. The 96KB Flash is split into a 96K x 8 array with hardware-secured block protection for bootloader/application partitioning, and 4KB RAM supports typical RTOS or foreground/background automotive stacks. Architecturally the device uses a von-Neumann style unified memory map with 23-bit Flash paging, a 16-bit ALU, and a hardware multiply/divide engine. The integrated voltage regulator (VREG) generates the 2.5V internal digital supply from the external 5V rail, eliminating the need for an external LDO in many 5V-only body modules. This combined with on-chip CAN, SCI, and SPI makes the part a one-chip solution for distributed automotive networks. Typical applications include CAN-connected body control modules (BCM), instrument cluster sub-MCUs, HVAC damper controllers, LIN/CAN gateway nodes, and industrial sensor interface boards. In automotive body networks the part typically acts as a slave node communicating over CAN at 125-500 kbps with a master BCM. The AEC-Q100 qualification and 48-pin LQFP expose pad package also support harsh-environment mounting. When designing with this device, ensure the BDM debug header is brought out to a 6-pin standard debug connector to allow in-circuit Flash programming and runtime debug. Decouple VDD/VSS with 100nF + 4.7uF ceramic close to the pins, and route the EXTAL/XTAL traces as short and symmetric as possible to avoid PLL jitter. Designers should also verify the latest PCN status - NXP has marked this part NRND. This page synthesizes distributor pricing, verified drop-in alternatives (same NXP S12C family), and practical design notes not aggregated on any single distributor page.

Cotización Contacto
MC9S12C96MPBE - HCS12 16-Bit MCU 96KB Flash 52-LQFP | NXP
MC9S12C96MPBE

MC9S12C96MPBE - HCS12 16-Bit MCU 96KB Flash 52-LQFP | NXP

The NXP MC9S12C96MPBE is a 16-bit HCS12 microcontroller (MCU) with 96KB of on-chip Flash program memory and 4KB of RAM, operating at up to 25 MHz core speed and housed in a 52-pin LQFP package (10 mm x 10 mm body). It belongs to the cost-effective MC9S12C-family and was originally designed by Freescale Semiconductor (now part of NXP) for general-purpose Industrial and Automotive network applications. The integrated peripherals include CANbus, SCI, SPI, EBI/EMI, PWM, a Watchdog Timer, and a Power-On Reset block, with 35 programmable I/O lines. A 16-bit microcontroller (MCU) is a single-chip computing engine that integrates a CPU, program memory (Flash), data memory (RAM), and a configurable set of peripherals around the CPU to handle real-time control tasks. The MC9S12C96 sits inside the Freescale/NXP automotive MCU hierarchy as: HCS12 -> CPU12 -> 16-bit CISC core; S12C family -> cost-optimized derivative; microcontroller -> embedded processor -> semiconductor device. Compared with 8-bit MCUs such as the 8051 or PIC16, the HCS12's 16-bit datapath and 25 MHz CPU12 core deliver higher arithmetic throughput while retaining deterministic interrupt response. Key features include: 96KB single-voltage Flash with in-application reprogramming, 4KB SRAM, an internal oscillator that simplifies BOM by removing the external crystal in many designs, 35 GPIO, and 8-bit PWM channels suitable for motor control loops. Communication is provided by one CAN 2.0 A/B module, one SCI (UART) and one SPI channel, plus the external bus interface (EBI/EMI) for memory expansion. The CPU12 core uses a 16-bit CISC architecture with an instruction pipeline, addressing up to 1 MB of linear memory through banked windows. Bus speed is derived from the PLL-multiplied oscillator and supports single-wire background debug mode (BDM) for non-intrusive in-circuit programming and field updates. Typical applications include automotive body controllers, HVAC actuators, instrument clusters, industrial CAN nodes, and sensor-interface boards where the CAN bus is the primary network. The wide supply range (2.5V/5V) lets the same board host either 3.3V or 5V peripherals. When designing with this device, budget for proper decoupling near every VDD/VSS pin pair and place the CAN transceiver close to the MCU to keep the bus-stub length short. The BDM interface is recommended for production firmware programming because it allows in-application updates without pulling the part out of the socket.

Cotización Contacto
MC9S12D32CFUE - 16-bit HCS12 MCU, 32KB Flash, 80-QFP | NXP
MC9S12D32CFUE

MC9S12D32CFUE - 16-bit HCS12 MCU, 32KB Flash, 80-QFP | NXP

The NXP Semiconductors MC9S12D32CFUE is a 16-bit HCS12 family microcontroller with 32 KB of on-chip Flash, 25 MHz CPU clock, and an 80-pin QFP (14x14 mm) package. It is part of the S12D sub-family, originally launched by Freescale (pre-NXP acquisition) and now classified NRND (Not Recommended for New Designs) by NXP. The MCU integrates CAN, SCI, SPI, and I2C peripherals, making it suitable for automotive body and chassis ECUs as well as industrial motor and sensor nodes. A 16-bit microcontroller (MCU) is an integrated computing core that executes instructions on 16-bit data paths, providing higher arithmetic precision than 8-bit devices while remaining simpler and cheaper than 32-bit Cortex-M parts. Within the broader taxonomy, the HCS12 belongs to the S12 family of automotive microcontrollers (MCU -> 16-bit MCU -> HCS12 -> S12D sub-family -> automotive microcontroller). The MC9S12D32CFUE runs from a single 2.5 V or 5 V supply, supports an external bus interface (8-bit narrow mode), and is built around the BGND/BDM debug module that allows non-intrusive in-circuit development. Key features of this part include 32 KB of Flash program memory, 2 KB of RAM, 1 KB of EEPROM, an 8-channel 10-bit ADC, an 8-channel PWM timer, a CAN 2.0 controller, dual SCI (UART) channels, SPI, and I2C. The S12D core is a CISC architecture with full 16-bit internal data paths, supporting single-wire BDM (Background Debug Mode) for non-intrusive in-circuit programming and debugging. The 80-QFP package is pin-compatible across most S12D family members, allowing easy memory-scaling upgrades. Typical applications include automotive body controllers, HVAC control panels, instrument clusters, industrial sensor hubs, CAN node bridges, and small appliance motor controllers. Because the part is NRND, design engineers should plan migration to an active S12K, S12XS, or S32K1 family member for new programs, while continuing to use the MC9S12D32CFUE in long-lifecycle fielded designs.

Cotización Contacto
MC9S12D32MFUE - 16-Bit 25MHz HCS12 MCU | NXP | Automotive
MC9S12D32MFUE

MC9S12D32MFUE - 16-Bit 25MHz HCS12 MCU | NXP | Automotive

The NXP MC9S12D32MFUE is a 16-bit HCS12 microcontroller operating up to 25 MHz, with 32 KB of flash program memory and 59 general-purpose I/O pins in an 80-pin QFP package measuring 14 x 14 mm. It integrates CANbus, I2C, SCI, SPI, PWM, and watchdog peripherals, making it a consolidated embedded-control solution for automotive and industrial equipment. A microcontroller is a programmable semiconductor that executes firmware, reads sensors, controls actuators, and coordinates peripheral devices. The HCS12 core belongs to the MCU hierarchy and combines a 16-bit processor with integrated memory and communications interfaces. Rather than requiring separate interface controllers, the MC9S12D32MFUE places CAN, serial, SPI, timing, and watchdog resources beside the CPU. Verified product data identifies 32 KB of flash organized as 32K x 8, 4K x 8 bytes of RAM, 1K x 8 bytes of EEPROM, and 59 I/O pins. Its communication set includes CANbus, I2C, SCI, and SPI, while PWM supports time-dependent output functions and the watchdog helps protect embedded operation. The part also supports both 2.5 V and 5 V operation according to the supplied comparison data. The S12D architecture provides full 16-bit internal data paths and an external bus that can operate in an 8-bit narrow mode for lower-cost memory interfacing. That combination allows engineers to retain 16-bit processing internally while connecting narrower external devices where appropriate. System integration resources managed by the SIM include clock generation, interrupt control, and bus interfacing. Typical uses include automotive body and chassis controllers, motor-control equipment, industrial automation, CAN-connected sensors, and compact embedded control panels. The 80-QFP footprint supports conventional PCB assembly, while the broad peripheral set can reduce component count in systems that otherwise require separate communication and timing ICs. Design planning must verify exact pin multiplexing, clock setup, memory interfaces, and peripheral electrical limits against the official datasheet before layout. Because the official NXP page identifies the lifecycle state as NRND, long-lived production programs should confirm availability, migration timing, and any approved replacement strategy before committing new designs. This page consolidates verified distributor specifications, lifecycle information, sourcing data, and practical engineering considerations for the MC9S12D32MFUE. It also separates documented facts from unavailable electrical details, helping engineers evaluate this NRND 16-bit MCU without assuming unverified pinout, supply-voltage, or timing parameters.

Cotización Contacto
MC9S12D32VFUE - 16-bit HCS12 MCU 32KB Flash 25MHz | NXP
MC9S12D32VFUE

MC9S12D32VFUE - 16-bit HCS12 MCU 32KB Flash 25MHz | NXP

The NXP (Freescale) MC9S12D32VFUE is a 16-bit HCS12 microcontroller featuring 32KB of flash memory, a 25 MHz bus-capable core, and a 10-bit ADC system, housed in an 80-pin QFP (14x14 mm) package. It integrates a rich set of standard on-chip peripherals on the S12D platform, including two asynchronous serial communications interfaces (SCI), an 8-channel input capture/output capture enhanced capture timer, two 8-channel 10-bit analog-to-digital converters, an 8-channel pulse-width modulator (PWM), 20 discrete digital I/O lines, and an Inter-IC Bus (IIC). A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals into one chip, forming the lowest tier of embedded processing devices. Within NXP's hierarchy, the S12D family sits under the HCS12/S12 16-bit microcontroller architecture, itself part of the broader automotive and industrial MCU portfolio alongside the S12X and SPC5 lines. Key features of the MC9S12D32VFUE include its CISC HCS12 CPU core clocked up to 25 MHz, 32KB (32K x 8) of on-chip flash program memory, and a fully static design suited to 5V automotive-grade environments. The dual 8-channel 10-bit ADCs allow simultaneous multi-sensor sampling, while the 8-channel PWM supports motor control and lighting applications without external timers. Technically, the S12D architecture uses a system resource mapping unit for clock generation, interrupt control, and bus interfacing, with standard on-chip peripherals connected through the internal bus. The star-connected module design simplifies firmware porting across the S12D memory variants (32KB, 64KB, 128KB), since register maps remain consistent across the family. Typical applications include automotive body electronics, dashboard clusters, HVAC controllers, industrial motor control with PWM-driven actuators, and multi-channel analog sensor acquisition in factory automation, where the 10-bit ADC and 5V noise immunity are practical advantages. When designing with this part, verify the availability status: NXP lists the MC9S12D32VFUE as NRND (Not Recommended for New Designs), so new projects should evaluate family successors while the flash capacity ladder within the same 80-QFP footprint eases migration. This page synthesizes distributor pricing, drop-in alternatives, lifecycle status, and practical design notes not found in the manufacturer datasheet, based on data verified as of 2026-10-18.

Cotización Contacto
MC9S12D64CFU - 16-Bit 25MHz HCS12 MCU, 64KB Flash, 80-QFP | NXP
MC9S12D64CFU

MC9S12D64CFU - 16-Bit 25MHz HCS12 MCU, 64KB Flash, 80-QFP | NXP

The NXP Semiconductors MC9S12D64CFU is a 16-bit HCS12 microcontroller IC running at 25 MHz, integrating 64 KB (64K x 8) of Flash program memory in an 80-pin PQFP (QFP 14x14 mm) surface-mount package. It belongs to NXP's MC9S12D family of CISC microcontrollers and is qualified to the AEC-Q100 automotive standard. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), peripherals, and I/O onto one die. Within the broader category, the MC9S12D64CFU is a CISC 16-bit MCU using the HCS12 core architecture. The HCS12 hierarchy sits inside the automotive-qualified 16-bit MCU segment, which itself is a branch of the wider microcontroller family tree: 16-bit MCU -> MCU -> microcontroller -> embedded processor -> semiconductor. Compared with 8-bit MCUs (such as HC08 or 8051), the 16-bit HCS12 offers a richer instruction set, larger linear address space, and on-chip peripherals suited to body and chassis ECUs. Key features of the MC9S12D64CFU include 64 KB of on-chip Flash for application code, 4 KB of RAM for data, an integrated 8-channel 10-bit A/D converter for analog sensor acquisition, and 59 general-purpose I/O pins for digital interfacing. Communication peripherals in the HCS12D family typically include multiple SCI (UART), SPI, and IIC (I2C) ports, plus PWM channels and timers, although specific peripheral counts for the MC9S12D64CFU need to be confirmed in the device datasheet. The 25 MHz bus clock and 16-bit data path allow deterministic interrupt latency and predictable execution. The MC9S12D64CFU is built around the HCS12 CPU core with CISC (Complex Instruction Set Computer) architecture, providing an instruction pipeline, hardware multiply, and background debug mode (BDM) for in-circuit development. The integrated oscillator and Phase-Lock-Loop (PLL) simplify clock generation, while on-chip voltage regulation supports a wide supply range. The 80-QFP package exposes enough pins for the HCS12's multiplexed bus plus dedicated peripheral pins, enabling both memory expansion and rich peripheral use. Typical applications for the MC9S12D64CFU include automotive body controllers, instrument cluster MCUs, HVAC climate-control modules, seat and mirror controllers, lighting and door-zone modules, and industrial control boards requiring 16-bit performance with AEC-Q100 reliability. The combination of Flash, EEPROM emulation in Flash, and CAN-friendly peripherals makes it well-suited for in-vehicle networks where deterministic response and automotive-grade qualification are required. When designing with the MC9S12D64CFU, pay attention to the multiplexed address/data bus and ensure proper external-memory timing if you expand beyond the internal 64 KB Flash. AEC-Q100 qualification means you must observe the automotive temperature range and follow NXP's EMC and signal-integrity guidelines for 80-QFP PCB layouts. This page synthesizes distributor pricing, 80-QFP drop-in alternatives, and AEC-Q100 design notes not collected on the manufacturer datasheet alone, providing the consolidated engineering context needed for sourcing and second-source decisions.

Cotización Contacto
MC9S12D64CFUE - HCS12 16-bit MCU, 64KB Flash, 80-QFP | NXP
MC9S12D64CFUE

MC9S12D64CFUE - HCS12 16-bit MCU, 64KB Flash, 80-QFP | NXP

The NXP MC9S12D64CFUE is a 16-bit microcontroller based on the enhanced HCS12 CPU core with CISC architecture, operating at a maximum bus frequency of 25MHz and packaged in an 80-pin QFP (14x14 mm). It integrates 64KB of on-chip Flash program memory, 4KB of RAM, 1KB of EEPROM, an 8-channel 10-bit ADC, and 59 general-purpose I/O pins for embedded automotive and industrial control applications. A microcontroller (MCU) is a single-chip computer that combines a CPU core, program and data memory, peripherals, and I/O on one die. The HCS12 family targets automotive body, chassis, and powertrain control, where deterministic interrupt response and robust on-chip peripherals reduce external component count. The MC9S12D64CFUE sits in the middle of the HCS12D sub-family and is widely used as a step up from smaller HCS12 parts when more code space or peripheral channels are required. Key features include a 25 MHz HCS12 core delivering 25 MIPS of throughput, 64KB of in-application re-programmable Flash with security features, 1KB byte-erasable EEPROM for non-volatile data, 4KB RAM, and a 10-bit 8-channel successive-approximation ADC suitable for sensor interfaces. Communication peripherals include 2 SCI (UART), SPI, and an I2C-compatible MSCAN module. The 80-pin QFP package exposes 59 digital I/O lines plus analog and timer pins. Architecturally, the MC9S12D64CFUE uses a 16-bit HCS12 CPU with integrated background debug mode (BDM), advanced timer modules (TIM/ECT/PWM), and a periodic interrupt timer. The device operates from a single 5V supply (with internal 2.5V regulator for core) and supports low-power Stop and Wait modes for quiescent-current-sensitive designs. Typical applications include automotive body controllers, instrument clusters, HVAC modules, sensor interface nodes, industrial PLCs, and CAN-connected distributed control nodes. The integrated MSCAN controller provides ISO 11898 compliant CAN 2.0A/B connectivity for in-vehicle networking. When designing with this part, ensure the BDM port is brought out to a 6-pin header for in-circuit debugging. Plan oscillator and reset circuit layout per the device guide so that the internal PLL locks reliably across the operating temperature range. This page synthesizes current distributor pricing, pin- and parameter-compatible alternatives from the HCS12 family, lifecycle status (NRND), and practical design guidance not aggregated in the manufacturer datasheet alone.

Cotización Contacto
MC9S12D64CFUER - 16-bit HCS12 MCU, 64KB Flash | NXP
MC9S12D64CFUER

MC9S12D64CFUER - 16-bit HCS12 MCU, 64KB Flash | NXP

The NXP MC9S12D64CFUER is a 16-bit HCS12 microcontroller featuring 64KB of on-chip Flash, 4KB of RAM, and a 25 MHz CPU core, housed in an 80-pin QFP (14x14 mm) package. It is part of the S12D family and is targeted at automotive and industrial embedded applications requiring deterministic real-time control with on-chip CAN, SCI, and SPI peripherals. An HCS12 microcontroller is a 16-bit CISC core designed for automotive and industrial real-time control, belonging to the broader category of microcontrollers (MCU) -> embedded processors -> semiconductors. The HCS12 family evolved from the HC11 architecture and adds enhanced instructions, a wider bus, and integrated peripherals such as CAN, making it suitable for body controllers, instrument clusters, and sensor interfaces. Key features of the MC9S12D64CFUER include 64KB (64K x 8) of Flash program memory, 4KB of RAM, 59 general-purpose I/O pins, an internal oscillator, and 2.5V/5V operating voltage. The device integrates peripheral blocks including CAN 2.0, SCI, SPI, timers, an 8-channel 10-bit ADC, and a PWM module. The wide supply range and industrial temperature grade support deployment in harsh environments. Technically, the MC9S12D64CFUER uses a 16-bit HCS12 CPU core with background debug module (BDM) for non-intrusive debug, an integrated voltage regulator for single 5V supply operation, and the System Integration Module (SIM) that consolidates clock generation, reset, and interrupt control. The external bus can be configured for 8-bit narrow mode to interface with cost-optimized external memories. Typical applications include automotive body electronics, instrument clusters, HVAC controls, industrial control modules, sensor interface boards, and small appliance controllers. The on-chip CAN controller and robust peripheral set make it especially attractive for in-vehicle networking nodes. Designers should note that the suffix 'CFUE' denotes the 80-QFP package and 'R' indicates Tape & Reel packaging. An external 4 MHz-16 MHz crystal is typically required for the PLL-based bus clock generator, and decoupling should follow standard MCU practice with 100 nF + 10 uF near each supply pin. This page consolidates distributor pricing, parametric data, drop-in same-package alternatives, and practical design notes that complement the manufacturer datasheet.

Cotización Contacto
MC9S12D64CPVE - 16-Bit HCS12 MCU, 64KB Flash, 25MHz, 112-LQFP | NXP
MC9S12D64CPVE

MC9S12D64CPVE - 16-Bit HCS12 MCU, 64KB Flash, 25MHz, 112-LQFP | NXP

The NXP Semiconductors MC9S12D64CPVE is a 16-bit HCS12 microcontroller based on a CISC architecture, operating at up to 25 MHz with 64 KB of on-chip Flash program memory, 4 KB of RAM, and 1 KB of EEPROM, all integrated in a 112-pin LQFP package measuring 20x20 mm. The device is qualified to the AEC-Q100 automotive standard and ships in industrial temperature grade, with a 2.5 V/5 V supply range that supports legacy 5 V automotive and industrial buses. According to the NXP product page, this part is currently marked NRND (Not Recommended for New Designs), which means existing customers can continue ordering but should plan a migration path to the actively-shipping S12D successors. A microcontroller (MCU) is a single-chip computer that combines a CPU core, program memory, data memory, and peripherals such as timers, ADCs, and communication interfaces. The HCS12 is a 16-bit CISC architecture that targets automotive body controllers, instrument clusters, and industrial control where deterministic interrupt response and rich on-chip peripherals matter more than raw MHz. Within the broader taxonomy, the MC9S12D64 sits in the family HCS12 -> 16-bit MCU -> microcontroller -> embedded processor -> semiconductor. Key features of the MC9S12D64CPVE include 91 general-purpose I/O lines, two asynchronous serial communication interfaces (SCI), one SPI, one I2C, and a CANbus controller for in-vehicle networking. The peripheral set also contains two 8-channel 10-bit analog-to-digital converters (ATD), an 8-channel enhanced capture timer (ECT) with input-capture/output-compare capability, an 8-channel pulse-width modulator (PWM), and a watchdog timer (WDT). On-chip oscillator, PLL, and reset/clock-generation logic simplify board-level design by removing many external components. Typical applications include automotive body controllers, HVAC control modules, instrument clusters, lighting controllers, seat-control modules, and CAN node endpoints in vehicle networks. The 5 V-tolerant I/O and integrated CAN transceiver-friendly timing make this part well-suited to 12 V/24 V vehicle electrical systems where robust communication and EMI tolerance are required. When designing with this device, use the Freescale/NXP CodeWarrior or Cosmic/SofTec toolchains and the standard HCS12 background-debug-mode (BDM) interface for flash programming and debug. Confirm the NRND lifecycle status with your NXP representative before committing to new production, and qualify a recommended replacement such as the S12Z or S12G family for new programs. This page consolidates distributor stock, lifecycle status, and drop-in alternatives that are not present in the manufacturer datasheet alone.

Cotización Contacto
MC9S12D64MFUE - HCS12 16-bit MCU, 64KB Flash, 80-QFP | NXP
MC9S12D64MFUE

MC9S12D64MFUE - HCS12 16-bit MCU, 64KB Flash, 80-QFP | NXP

The NXP Semiconductors MC9S12D64MFUE is a 16-bit HCS12 microcontroller (MCU) featuring an HCS12 CISC core running at 25 MHz, 64 KB of on-chip Flash program memory, and a 2.5 V/5 V supply range, housed in an 80-pin QFP (PQFP-80, 14x14 mm) surface-mount package. It integrates standard on-chip peripherals including two asynchronous serial communications interfaces (SCI), an 8-channel IC/OC enhanced capture timer, two 8-channel 10-bit analog-to-digital converters (ADC), an 8-channel pulse-width modulator (PWM), a CAN 2.0 module, and a byte data link controller (BDLC), plus 59 general-purpose I/O pins for interfacing to external components. The Flash-based program memory supports byte-erasable in-application reprogramming, simplifying field firmware updates without requiring external boot memory. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and a set of peripherals such as timers, communication controllers, and analog interfaces. Within the broader taxonomy, the MC9S12D64MFUE belongs to the HCS12 family (16-bit CISC microcontroller) -> S12D sub-family (automotive/industrial grade with Flash) -> NXP S12 automotive MCU portfolio -> embedded microcontroller -> semiconductor IC. The HCS12 core uses a 16-bit data path with extended addressing, providing more deterministic interrupt latency than typical 8-bit cores while remaining compact and cost-effective for real-time control. Key differentiators of the MC9S12D64MFUE include integrated CAN 2.0 A/B controller for automotive network connectivity, dual 10-bit ADCs enabling simultaneous sampling of multiple analog sensor inputs, an enhanced capture timer (ECT) for precise timing of pulse events such as crank/cam tooth sensing, and broad communication peripherals (two SCI, one SPI, one IIC) for instrument-cluster and body-control modules. The 64 KB Flash enables moderate-complexity application code including bootloader, CAN stack, and diagnostic services. Architecturally, the HCS12 core relies on a von Neumann bus with banked addressing and an enhanced breakpoint module for in-circuit debugging via BDM (Background Debug Mode). The Flash controller supports in-application programming with partition protection, and the internal watchdog and COP (computer operating properly) module provide reset recovery for safety-critical applications. Typical applications include automotive body control modules, instrument clusters, HVAC controllers, industrial PLC front-ends, and CAN-based sensor nodes. Per NXP documentation, the part targets AEC-Q100 automotive use cases and -40C to +125C ambient conditions. Design tip: place a 0.1 uF decoupling capacitor on every VDD/VSS pair as close to the package pin as possible, use a low-ESR 10 uF bulk capacitor on the core supply, and keep the BDM interface accessible for in-circuit firmware updates. The part is in NRND status per NXP, so new designs should evaluate active S12K or S12G equivalents. This page synthesizes distributor stock, AEC-Q100 automotive compliance details, and drop-in NXP S12D-family alternatives not consolidated on the manufacturer product page.

Cotización Contacto