Microcontroladores

Productos (19.000+)

PIC18F15Q40-I/REB - 8-Bit 64MHz PIC18 MCU, 32KB Flash | Microchip
PIC18F15Q40-I/REB

PIC18F15Q40-I/REB - 8-Bit 64MHz PIC18 MCU, 32KB Flash | Microchip

The Microchip Technology PIC18F15Q40-I/REB is an 8-bit PIC18 microcontroller running up to 64MHz with 32KB Flash, 2KB SRAM and 512 bytes EEPROM in a compact 20-pin VQFN 3x3 mm package. Built on the PIC18-Q40 family architecture, the device integrates a 12-bit ADC with Computation, 8-bit DACs, 16-bit PWMs, Direct Memory Access (DMA), Configurable Logic Cells (CLC) and communication peripherals suited to real-time control and sensor applications. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (Flash), data memory (RAM), non-volatile storage (EEPROM) and configurable peripherals on a single die. Within the broader taxonomy, the PIC18F15Q40 sits under 8-bit microcontroller -> microcontroller -> integrated circuit -> semiconductor. Microchip's PIC18 family uses a Harvard RISC architecture with a 16-bit instruction word optimized for C-compiled firmware and deterministic interrupt response. Key differentiating features include 12-bit ADC with Computation for hardware-averaged oversampling and analog signal conditioning, 16-bit PWMs with fine resolution for power conversion and motor control, configurable logic cells for glue-less peripheral interconnection, and DMA to offload CPU data movement. The 20-pin VQFN package also enables layout-dense sensor nodes and appliance-grade products. Architecturally, the PIC18F15Q40 combines a high-performance 8-bit core with advanced analog integration. The ADC2 (12-bit with computation) supports hardware accumulation, oversampling and threshold-based triggering, offloading DSP-style filtering from the CPU. CLCs allow combinational/sequential logic to be built from internal peripheral signals without external gates, while DMA channels move data between peripherals and RAM without CPU intervention, critical for high-throughput sensor fusion. Typical applications include sensor signal conditioning nodes, motor control (BLDC and stepper) sub-systems, white-goods and appliance control boards, LED lighting controllers, IoT edge nodes, and small-form-factor power converters. The combination of 12-bit ADC, 16-bit PWM and DMA is particularly suited to digital power and closed-loop control. When designing with this device, allocate analog and digital supply pins separately and place the VQFN-20 EP thermal pad with sufficient copper to meet thermal targets. Verify ICSP programming pin assignments against the datasheet pinout before finalizing the PCB, since the small 3x3 mm footprint leaves limited routing margin. This page synthesizes distributor pricing, drop-in alternatives within the PIC18-Q40 family, and practical design notes not consolidated in the manufacturer datasheet, delivering information gain beyond distributor listings.

Cotización Contacto
PIC18F15Q40-I/SS - 64MHz 8-bit MCU, 32KB Flash, 20-SSOP | Microchip
PIC18F15Q40-I/SS

PIC18F15Q40-I/SS - 64MHz 8-bit MCU, 32KB Flash, 20-SSOP | Microchip

The Microchip Technology PIC18F15Q40-I/SS is an 8-bit PIC18 microcontroller running up to 64 MHz with 32 KB of Flash, 2 KB of SRAM, and 512 bytes of EEPROM, housed in a 20-pin SSOP package. It is part of the PIC18-Q40 family targeted at real-time control and sensor applications. The device operates from 1.8 V to 5.5 V and provides 18 general-purpose I/O pins. An 8-bit microcontroller is a programmable computing core that executes one byte per internal data path and integrates Flash program memory, SRAM, and peripherals into a single silicon die. The PIC18 family extends Microchip's baseline PIC16 architecture with a 16-bit instruction word, hardware multiplier, linear RAM map, and C-friendly compiler support (XC8), placing it in the MCU hierarchy above PIC10/12/16 and below the 16-bit dsPIC/PIC24 and 32-bit PIC32 lines. PIC18-Q40 specifically targets compact, low-pin-count real-time control designs. Key features of the PIC18F15Q40 include a 12-bit ADC-with-Computation (ADCC) supporting automated Capacitive Voltage Divider (CVD) touch sensing, two 8-bit DACs, two 16-bit PWMs with complementary outputs and center-aligned modes, a Direct Memory Access (DMA) controller, Configurable Logic Cells (CLC) for hardware glue logic, and communication peripherals including UART, SPI, and I2C. The ADCC engine performs oversampling, averaging, and threshold comparisons autonomously, reducing CPU burden. Architecturally, the device combines an 8-bit data path with a 16-bit enhanced Harvard instruction set, 31-level stack, and 49 instructions. Internal 64 MHz oscillator accuracy is +/-1 percent across voltage and temperature. The CIP (Core Independent Peripherals) approach - CLC + DMA + ADCC - allows sensor-processing pipelines to run without waking the CPU, enabling low-power sensor node designs. Typical applications include capacitive touch user interfaces, sensor signal conditioning, LED lighting control, small motor control, IoT end nodes, and battery-powered instrumentation. The combination of ADCC, DAC, and PWM in a 20-pin SSOP suits appliance front panels, white-goods controls, and compact industrial sensor modules. When designing with this MCU, ensure the SSOP-20 footprint accommodates 0.65 mm pitch routing and that the CVD touch sensor trace geometry follows Microchip's mTouch guidelines. Power sequencing is straightforward within the 1.8 V to 5.5 V range, and decoupling per the datasheet (100 nF + 1 uF) should be placed within 3 mm of VDD pins. This page synthesizes distributor pricing, pin-compatible drop-in alternatives, and practical design notes - including DMA and CLC usage patterns - that are not collected in a single location in the manufacturer datasheet.

Cotización Contacto
PIC18F15Q40T-I/SO - 8-bit 64MHz MCU, 32KB Flash | Microchip
PIC18F15Q40T-I/SO

PIC18F15Q40T-I/SO - 8-bit 64MHz MCU, 32KB Flash | Microchip

The Microchip PIC18F15Q40T-I/SO is a high-performance 8-bit PIC microcontroller from the PIC18-Q40 family, featuring a 64 MHz CPU core, 32 KB of Flash program memory, 2 KB of SRAM and 512 bytes of EEPROM, housed in a 20-pin SOIC (SO) package. This compact MCU is engineered for real-time control and sensor applications, integrating a 12-bit ADC with Computation (ADCC), two 8-bit DAC modules, up to four 16-bit PWM channels, DMA, Configurable Logic Cells (CLC), and a Peripheral Pin Select (PPS) routing fabric. A PIC18-Q40 microcontroller is a member of the 8-bit PIC18 family from Microchip, which itself sits within the broader category of microcontrollers (MCUs) and ultimately integrated circuits. PIC18-Q40 devices target low-pin-count, real-time signal-chain applications by combining a high-MIPS 8-bit core with sophisticated analog and digital peripherals that previously required external components. The ADCC (ADC-with-Computation) automates capacitive touch sensing (CVD), averaging, filtering, oversampling and threshold comparison, replacing software loops with hardware acceleration. Key differentiating features include ADCC for advanced capacitive touch sensing, two 8-bit DACs for setpoint generation or waveform output, 16-bit PWMs with up to four channels for power-conversion and motor control, integrated DMA for offloading the CPU, PPS for flexible pin mapping, and a CLC block for combinational logic synthesis without external gates. The part operates across 1.8V to 5.5V VDD and supports an industrial temperature range of -40C to +85C. Architecturally, the PIC18F15Q40T-I/SO uses an enhanced Harvard architecture with a 16-bit instruction word and an 8-bit data path, executed by the C-compiler-optimized PIC18 core. The ADCC and CLC blocks reduce firmware burden for touch and logic applications, while DMA enables high-throughput ADC-to-memory transfers without CPU intervention. Typical applications include capacitive touch user interfaces, sensor signal conditioning, low-power motor control, LED lighting control, and compact IoT sensor nodes. The wide 1.8V to 5.5V supply range supports both 3.3V and 5V system rails. When designing with this part, leverage PPS to remap peripherals to any digital I/O pin, which simplifies PCB layout. Ensure adequate decoupling with a 100 nF capacitor on VDD near the package and follow Microchip AN2648 (Capacitive Touch Design) for robust touch-sensing electrode patterns. This page synthesizes current distributor pricing, drop-in alternative MPNs, and practical design notes beyond what is found in the manufacturer datasheet, supporting faster component selection and BOM finalization.

Cotización Contacto
PIC18F15Q41-E/P - 8-bit MCU, 32KB Flash, 64MHz, 20-PDIP | Microchip
PIC18F15Q41-E/P

PIC18F15Q41-E/P - 8-bit MCU, 32KB Flash, 64MHz, 20-PDIP | Microchip

The Microchip Technology PIC18F15Q41-E/P is an 8-bit RISC microcontroller from the PIC18-Q41 family, featuring a high-performance PIC18 CPU core operating at up to 64 MHz, with 32 KB of Flash program memory, 2 KB of SRAM, and 512 bytes of data EEPROM, housed in a 20-pin PDIP (Plastic DIP) through-hole package. The device operates from 1.8 V to 5.5 V and integrates advanced analog peripherals including an on-chip operational amplifier, 12-bit ADC with Computation (ADCC), an 8-bit DAC, DMA, 16-bit PWM, and Peripheral Pin Select (PPS) for flexible signal routing. A PIC18 microcontroller is an 8-bit Harvard-architecture MCU belonging to the broader category of microcontrollers (MCU) which sit within the integrated circuit (semiconductor) family tree. PIC18 devices use a modified RISC instruction set and are widely used in embedded control, sensor interfacing, and low-power IoT applications where deterministic real-time response and rich analog integration are required. The Q41 sub-family specifically targets sensor and real-time control applications, adding analog peripherals that historically required external components. Key features include 18 general-purpose I/O pins, on-chip op-amp, 12-bit ADCC, 8-bit DAC, 16-bit PWM with complementary outputs, DMA controller for offloading CPU data movement, UART/SPI/I2C communication peripherals, and configurable logic cells. The PPS feature allows digital peripheral pins to be remapped to multiple physical I/O pins, simplifying PCB layout when signal routing conflicts arise. The -E temperature grade supports -40 °C to +125 °C operation, making the part suitable for industrial environments. Architecturally, the PIC18F15Q41 leverages a 16-bit instruction word with an 8-bit data path, hardware multiplier, and a vectored interrupt controller supporting prioritized interrupts. The 64 MHz internal oscillator eliminates the need for an external crystal in many designs, and the device supports multiple low-power sleep modes for battery-powered applications. Typical applications include industrial sensor conditioning, IoT edge nodes, motor control (small DC fans, solenoids), LED lighting controllers, and consumer appliances. The integrated op-amp and 12-bit ADCC are particularly well suited for direct interface to analog sensors (temperature, pressure, light) without external signal conditioning ICs. When designing with this device, ensure that ICSP programming pins (PGC/PGD) and MCLR are accessible for in-circuit programming. A 0.1 µF decoupling capacitor placed within 5 mm of VDD and a 10 µF bulk capacitor are recommended for stable operation across the wide 1.8 V to 5.5 V supply range. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, with cross-brand candidates sourced from third-party parametric databases and verified for same-package pin compatibility.

Cotización Contacto
PIC18F15Q41-E/REB - 8-bit 64MHz MCU, 32KB Flash VQFN-20 | Microchip
PIC18F15Q41-E/REB

PIC18F15Q41-E/REB - 8-bit 64MHz MCU, 32KB Flash VQFN-20 | Microchip

The Microchip Technology PIC18F15Q41-E/REB is an 8-bit RISC microcontroller from the PIC18-Q41 family, featuring a high-performance PIC18 CPU core running at up to 64 MHz, 32 KB of Flash program memory, 2 KB of data RAM, and 512 bytes of data EEPROM, all housed in a 20-pin VQFN (3x3 mm) package. It integrates an on-chip operational amplifier, a 12-bit ADC with Computation (ADCC), an 8-bit DAC, a 16-bit PWM module, DMA, and Peripheral Pin Select (PPS), making it well-suited for sensor and real-time control applications. The operating voltage range spans 1.8 V to 5.5 V, with the /REB suffix denoting the VQFN-20 (3x3) package and the /E suffix indicating the extended -40 °C to +125 °C industrial temperature grade. An 8-bit microcontroller (MCU) is a compact programmable processor that integrates a CPU, memory, and peripherals on a single die, designed to deliver deterministic real-time control at low power and cost. PIC18 devices sit between baseline PIC10/12/16 parts and 16-bit dsPIC33 parts in Microchip's 8-bit hierarchy, combining a rich peripheral set with the simplicity of an 8-bit data path. The PIC18F15Q41 belongs to the Q41 sub-family, which adds high-performance analog peripherals (ADCC, DAC, op-amp) and Core Independent Peripherals (CIPs) for offloading CPU work. Key features include 32 KB self-programmable Flash with Flash Partitioning, a 12-bit ADCC supporting up to 17 channels and hardware oversampling, an 8-bit DAC with low-power operation, configurable logic cells, multiple 16-bit PWMs with complementary outputs, and four DMA channels for data movement without CPU intervention. Communication interfaces include two UART, two SPI, and two I2C modules, all remappable via PPS. The architecture is built around an enhanced PIC18 Harvard core with hardware multiply, a 31-level hardware stack, and an interrupt controller with vectored priorities. The ADCC can perform automated averaging and threshold comparisons in hardware, while the op-amp can be used as a PGA or general-purpose amplifier for sensor signal conditioning - both reduce firmware complexity and code size. Typical applications include closed-loop fan control, sensor signal conditioning with analog front-end, LED lighting controllers, low-cost BLDC drivers, battery charging front-ends, and IoT edge sensor nodes. The combination of op-amp, DAC, ADCC, and 16-bit PWM enables a single-chip solution for many closed-loop analog control loops. When designing with this part, ensure the VDDCORE pin is decoupled with a 100 nF + 1 µF pair, the VDD pin uses a 10 µF bulk + 100 nF bypass, and unused I/O pins are configured as outputs low to minimize current draw. For automotive or extended-temperature deployments requiring -40 °C to +125 °C operation, the /E suffix confirms grade suitability. This page synthesizes distributor pricing, pin-compatible alternatives, and practical design notes not found in the standalone manufacturer datasheet.

Cotización Contacto
PIC18F15Q41-E/SO - 32KB Flash 8-bit MCU, 64MHz, 20-SOIC | Microchip
PIC18F15Q41-E/SO

PIC18F15Q41-E/SO - 32KB Flash 8-bit MCU, 64MHz, 20-SOIC | Microchip

The Microchip Technology PIC18F15Q41-E/SO is a high-performance 8-bit PIC microcontroller from the PIC18-Q41 family with 32KB Flash, 2KB SRAM, and 512B EEPROM in a 20-pin SOIC package. The device runs at up to 64MHz CPU speed, operates from 1.8V to 5.5V, and integrates advanced analog peripherals including a 12-bit ADC, an 8-bit DAC, an on-chip operational amplifier, a 16-bit PWM, and configurable peripherals via Peripheral Pin Select (PPS). It is specifically designed for sensor interfacing and real-time control in compact form-factor applications. An 8-bit microcontroller (MCU) is a programmable integrated circuit that combines a CPU, memory, and peripherals on a single die. The PIC18 family is Microchip's mid-range 8-bit architecture, positioned above PIC16 (baseline) and PIC10/12/14 (low pin-count) families. MCUs form the "brain" of embedded systems, executing firmware to read sensors, drive outputs, and manage communications. The PIC18F15Q41-E/SO is engineered for sensor and real-time control applications, sitting within the broader hierarchy: PIC18-Q41 family -> PIC18F family -> 8-bit MCU -> microcontroller -> embedded IC -> semiconductor. Key features include 32KB self-programmable Flash with 10,000 erase/write cycles, 2KB SRAM, 512B high-endurance EEPROM, and 12-bit differential ADC with computation. The on-chip op-amp eliminates the need for an external amplifier in many sensor signal chains, while the 8-bit DAC enables analog waveform generation. Configurable logic cells and PPS allow flexible pin function remapping, simplifying PCB layout when peripherals must move due to routing constraints. The device supports UART, SPI, and I2C serial communications plus DMA for offloading CPU data transfers. Typical applications include motor control (BLDC, stepper), power supply monitoring and conversion, sensor signal conditioning, LED lighting control, IoT edge nodes, and small medical/industrial devices. The combination of analog integration and PWM channels makes it particularly suited for closed-loop control systems. When designing with this device, evaluate the 20-pin count early - if more I/O is needed, consider the PIC18F16Q41 or PIC18F14Q41 variants in the same package for memory scaling.

Cotización Contacto
PIC18F15Q41-E/SS - 8-bit MCU 32KB Flash 64MHz SSOP-20 | Microchip
PIC18F15Q41-E/SS

PIC18F15Q41-E/SS - 8-bit MCU 32KB Flash 64MHz SSOP-20 | Microchip

The Microchip Technology PIC18F15Q41-E/SS is an 8-bit PIC18 RISC microcontroller running up to 64 MHz with 32 KB of Flash program memory, 2 KB of SRAM and 512 bytes of EEPROM, housed in a 20-pin SSOP package. It integrates advanced analog peripherals including a 12-bit ADC with Computation (ADC2), an 8-bit DAC, on-chip operational amplifiers, a 16-bit PWM module and a high-performance sensor-interface analog fabric aimed at real-time control applications. An 8-bit microcontroller (MCU) is a small, self-contained computer-on-a-chip built around an 8-bit data path. The PIC18 family uses a Harvard RISC architecture with separate program and data buses, 31-level hardware stack, and a rich peripheral set that places digital control logic and analog signal conditioning on the same die. Within the broader semiconductor taxonomy this part belongs to: microcontroller -> 8-bit MCU -> PIC18 -> PIC18-Q41 family -> embedded computing IC. Key features include 32 KB self-programmable Flash with device Information Area (DIA), 2 KB data SRAM with hardware-managed banking, 512 bytes data EEPROM rated for 100k erase/write cycles, a 12-bit ADC2 with up to 17 analog channels, two on-chip operational amplifiers, a 5-bit DAC and an 8-bit DAC, four 16-bit PWM channels with complementary outputs and fine resolution, plus communication peripherals such as UART, SPI and I2C. The device operates from 1.8 V to 5.5 V and supports extended temperature range -40C to +125C. Architecturally the PIC18-Q41 family combines a high-drive 64 MHz core with on-chip op-amps, zero-crossing detect and a configurable logic cell so the MCU can replace many external analog components. This integration simplifies sensor signal chains for thermocouples, RTDs, photodiodes and strain gauges while reducing BOM count and PCB area. Typical applications include IoT sensor nodes, medical wearable monitors, industrial sensor transmitters, LED lighting controllers, low-end motor control, smoke and gas detectors, and consumer white-goods HMI front-ends. The wide voltage range and rich analog make it equally suited to 3.3 V coin-cell designs and 5 V industrial loops. When designing with this part, allocate sufficient decoupling (100 nF + 1 uF) close to VDD/AVDD pins, route the analog reference and Vcap carefully, and respect the programming/debug pin (ICSPCLK/ICSPDAT) sharing to avoid in-circuit programming conflicts. This page synthesizes distributor pricing, drop-in SSOP-20 alternatives and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
PIC18F15Q41-I/P - 8-bit MCU, 32KB Flash, Op Amp | Microchip
PIC18F15Q41-I/P

PIC18F15Q41-I/P - 8-bit MCU, 32KB Flash, Op Amp | Microchip

The Microchip Technology PIC18F15Q41-I/P is an 8-bit RISC microcontroller from the PIC18-Q41 family, featuring 32KB of Flash program memory, 2KB of SRAM, and 512 bytes of EEPROM in a 20-pin PDIP through-hole package. It operates at up to 64MHz clock speed with a wide 2.3V to 5.5V supply range and includes a 12-bit ADC with Computation (ADCC), an 8-bit DAC, two op amps, a 16-bit PWM with dual independent outputs, DMA, and Peripheral Pin Select (PPS) for flexible signal routing. What is an 8-bit MCU? An 8-bit microcontroller is a single-chip computer that processes data in 8-bit chunks and integrates a CPU, memory, and peripherals. Within the broader taxonomy, the PIC18F15Q41 belongs to the PIC18 family of enhanced 8-bit microcontrollers, which sit under the PIC microcontrollers family, the microcontroller (MCU) category, and ultimately power management and embedded control semiconductors. PIC18 devices balance low cost, low power, and ease of use, making them a long-standing industry workhorse for sensor and control designs. Key features of this part include integrated analog peripherals (op amps, 12-bit ADCC, 8-bit DAC, comparators, 8-bit voltage reference), Core Independent Peripherals (CIPs) such as CWG, NCO, and PWM, DMA support for offloading CPU data movement, and on-chip debug via single-wire In-Circuit Serial Programming (ICSP). The 16-bit PWM module delivers dual independent outputs on the same time base, ideal for motor control and digital power conversion, while PPS allows nearly any digital peripheral to be mapped to almost any I/O pin. From an architectural standpoint, the PIC18F15Q41-I/P uses a Harvard RISC architecture with an 8-level hardware stack, hardware multiplier, and 31 interrupt sources. The ADCC automates averaging, threshold detection, and burst accumulation, reducing firmware overhead for sensor front-ends. Two on-chip op amps and an 8-bit DAC enable closed-loop analog signal chains without external components. Typical applications include sensor signal conditioning with on-chip op amps, LED lighting and color mixing, low-cost motor control (PWM-driven brushed DC or stepper), battery-powered IoT nodes, capacitive touch user interfaces, and consumer appliance control panels. The wide 2.3V-5.5V operating range simplifies both 3.3V and 5V system designs. When designing with this MCU, ensure that the ICSP programming pins (PGx/RGx) are accessible for field updates and consider using PPS to route peripherals in a way that simplifies PCB routing. For noise-sensitive analog designs, place the part's analog supply (AVDD) as close to a clean, bypassed source as possible. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
PIC18F15Q41-I/REB - 8-Bit MCU, 32KB Flash, 20-VQFN | Microchip
PIC18F15Q41-I/REB

PIC18F15Q41-I/REB - 8-Bit MCU, 32KB Flash, 20-VQFN | Microchip

The Microchip Technology PIC18F15Q41-I/REB is an 8-bit PIC18 microcontroller with 32KB of Flash program memory, 2KB of SRAM, and 512 bytes of EEPROM, operating at up to 64MHz in a compact 20-pin VQFN (3x3 mm) package. It belongs to the PIC18-Q41 family, which targets sensor interfacing, real-time control, and advanced analog applications where board space is constrained but analog performance cannot be compromised. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path, integrating a CPU, non-volatile program memory, volatile data memory, peripherals, and I/O on one silicon die. PIC18-family MCUs from Microchip use a Harvard-architecture RISC core with hardware multiplier, offering deterministic instruction timing, low power consumption, and a mature MPLAB X / MCC toolchain. They sit within the broader category of embedded microcontrollers -> microprocessors -> semiconductors -> integrated circuits. Key differentiating features of the PIC18F15Q41-I/REB include a 12-bit ADC2 with computation, an 8-bit DAC, two on-chip operational amplifiers, a 16-bit PWM, DMA, and Peripheral Pin Select (PPS). The device also integrates two UART, SPI, and I2C peripherals plus a complementary waveform generator (CWG) and numerically controlled oscillator (NCO). These features position the part above general-purpose 8-bit MCUs and adjacent to Microchip's PIC16 family. Architecturally, the PIC18F15Q41 leverages the enhanced mid-range core with a modified Harvard bus, hardware multiply/divide, and vectored interrupts. The advanced analog peripherals - op-amp + 12-bit ADC2 - reduce the bill of materials in sensor-conditioning circuits, while DMA offloads data movement from the CPU. Typical applications include IoT sensor nodes, industrial sensing and control loops, LED lighting drivers, medical instrumentation front-ends, and consumer appliances requiring on-chip analog conditioning in a small 3x3 mm VQFN footprint. When designing with this device, ensure the VQFN-20 (3x3) thermal pad is properly soldered to the PCB ground plane for thermal dissipation and electrical reference. The on-chip op-amp output drives only modest loads - buffer externally if heavy sourcing/sinking is required.

Cotización Contacto
PIC18F15Q41-I/SO - 32KB Flash, 64MHz 8-bit MCU | Microchip
PIC18F15Q41-I/SO

PIC18F15Q41-I/SO - 32KB Flash, 64MHz 8-bit MCU | Microchip

The Microchip Technology PIC18F15Q41-I/SO is an 8-bit PIC18 microcontroller with 32 KB of Flash program memory, 2 KB of SRAM, and 512 bytes of EEPROM, operating at up to 64 MHz and housed in a 20-pin SOIC package. The part integrates an on-chip operational amplifier, a 12-bit differential Analog-to-Digital Converter (ADC2), an 8-bit DAC, 16-bit PWM peripherals, and a configurable logic block, all aimed at sensor and real-time control designs in compact form factors. A PIC microcontroller (often abbreviated MCU) is a programmable logic device that integrates a CPU, memory, and peripherals onto a single die. The PIC18 family sits in the 8-bit MCU category hierarchy between the smaller PIC16 and the higher-end 16-bit dsPIC33 families, with a modified Harvard RISC core optimized for deterministic interrupt response and low-power operation. The Q41 subgroup further specializes PIC18 by adding advanced analog peripherals for sensor-front-end and closed-loop control applications. Key features of the PIC18F15Q41-I/SO include 18 general-purpose I/O pins, a 64 MHz internal oscillator, multi-voltage I/O (MVIO) support down to 1.8 V, a 12-bit ADC with computation engine, two 8-bit DACs, on-chip op-amps for signal conditioning, and configurable logic cells for hardware customization. Core-independent peripherals reduce CPU load for time-critical tasks. The architecture combines a RISC CPU with on-chip debug and a Peripheral Pin Select (PPS) system that maps digital peripherals to any I/O pin, simplifying PCB layout. The device operates over an extended industrial temperature range and offers low-power sleep modes with peripheral wake-up, suitable for battery-powered sensor nodes. Typical applications include IoT sensor nodes, medical wearables, smart lighting controllers, industrial process sensors, and low-end motor control. The combination of integrated op-amps and a 12-bit ADC enables single-chip signal-chain designs for thermistor, RTD, and strain-gauge conditioning. When designing with this MCU, ensure decoupling capacitors are placed close to VDD pins, and follow Microchip's recommended programming/debug header layout for MPLAB PICkit or ICD tool compatibility. PPS remapping must be configured before peripheral use to avoid unexpected pin states during bring-up. This page synthesizes verified distributor pricing, curated cross-reference alternatives within the same package, and application notes not aggregated in the Microchip datasheet - offering clear engineering guidance for new designs.

Cotización Contacto
PIC18F15Q41-I/SS - 8-Bit MCU, 64MHz, 32KB Flash | Microchip
PIC18F15Q41-I/SS

PIC18F15Q41-I/SS - 8-Bit MCU, 64MHz, 32KB Flash | Microchip

The Microchip Technology PIC18F15Q41-I/SS is an 8-bit PIC18 microcontroller delivering 64 MHz CPU performance with 32 KB Flash, 2 KB SRAM, and 512 bytes EEPROM, housed in a 20-pin SSOP package. The Q41 family integrates advanced analog peripherals - including a 12-bit ADC with computation, two 8-bit DACs, an on-chip operational amplifier, and 16-bit PWM - that target sensor and real-time control applications. What is a PIC18 microcontroller? The PIC18 is Microchip's high-performance 8-bit MCU family built on a modified Harvard architecture with a C-optimized instruction set. PIC18 microcontrollers belong to the broader category of microcontrollers (MCUs), which sit inside the integrated circuit (IC) hierarchy along with memory, analog, and interface ICs. Within an embedded system, an MCU provides the central processing, memory, and peripheral integration that replaces discrete logic and analog chains, making the PIC18F15Q41 a single-chip solution for compact sensor/control nodes. Key features include a wide 1.8V to 5.5V operating voltage range, 18 general-purpose I/O pins, hardware UART/SPI/I2C, configurable logic cells, and zero-crossing detection. The device operates across -40 C to +85 C (industrial) and supports in-circuit serial programming (ICSP) plus on-chip debugging. An integrated temperature indicator and 5-bit DAC simplify closed-loop designs. The Q41 architecture combines a 16-bit instruction path with 8-bit data paths and a hardware multiplier, enabling efficient DSP-style filtering on the ADC channel. The 12-bit ADC with accumulation and averaging automates sensor linearization, while the complementary waveform generator produces complementary, dead-band-controlled PWM for power-conversion and motor-drive stages. Typical applications include IoT sensor nodes, LED lighting controllers, medical monitoring peripherals, industrial sensing, capacitive-touch human interfaces, and low-power fan/HVAC control. The combination of analog integration and small SSOP-20 footprint enables shrinking analog front-end designs into compact PCBs. When designing with this MCU, ensure the supply decoupling network uses a 100 nF ceramic capacitor directly on VDD plus a bulk capacitor on the analog rail. Review the configuration word settings early in firmware development since incorrect oscillator or watchdog settings are the most common bring-up pitfalls. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet. Pinout, parametric differences, and same-package alternatives are consolidated for engineers evaluating the PIC18F15Q41-I/SS against PIC18F14Q41 and PIC18F05Q41 family members.

Cotización Contacto
PIC18F15Q41T-I/SO - 32KB Flash 8-bit MCU, 64MHz | Microchip
PIC18F15Q41T-I/SO

PIC18F15Q41T-I/SO - 32KB Flash 8-bit MCU, 64MHz | Microchip

The Microchip Technology PIC18F15Q41T-I/SO is a high-performance 8-bit PIC18 microcontroller IC featuring 64 MHz CPU speed, 32 KB (32K x 8) FLASH program memory, 2 KB RAM, and 512 bytes of EEPROM, housed in a 20-pin SOIC package. It integrates advanced analog peripherals including a 12-bit ADC with Computation (ADCC), an 8-bit DAC, an on-chip operational amplifier, and a 16-bit PWM module designed for sensor and real-time control applications. A PIC microcontroller (MCU) is a compact, low-power, programmable integrated circuit combining a CPU, memory (Flash/RAM/EEPROM), and peripherals on a single die. Within the broader taxonomy it belongs to the 8-bit MCU class, which sits below 16-bit dsPIC and 32-bit ARM Cortex-M devices in performance and above discrete logic in integration. PIC MCUs typically use a RISC Harvard architecture with separate program and data buses, executing one instruction per clock cycle (excluding branches), giving predictable timing for embedded control loops. Key differentiating features include Direct Memory Access (DMA), Peripheral Pin Select (PPS) for flexible I/O mapping, and zero-crossing detection hardware that simplifies AC line-sensing designs. Communication interfaces include UART, SPI, and I2C, while the integrated op-amp eliminates external analog front-end components for many sensor-conditioning circuits. Typical applications span consumer white goods, LED lighting controllers, battery-powered IoT sensor nodes, motor control for small DC fans and pumps, and touch/proximity user interfaces. The wide 1.8V to 5.5V operating range makes it suitable for both 3.3V and 5V systems directly without level shifters. When designing with this part, ensure the high-temperature operating range (-40C to +85C for the -I grade) is observed for industrial enclosures, and use the PPS feature to remap peripheral functions to free I/O pins when adding functions late in the design cycle. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
PIC18F15Q41T-I/SS - 32KB Flash 8-bit MCU w/ Op Amp | Microchip
PIC18F15Q41T-I/SS

PIC18F15Q41T-I/SS - 32KB Flash 8-bit MCU w/ Op Amp | Microchip

The Microchip Technology PIC18F15Q41T-I/SS is an 8-bit PIC18 microcontroller with 32KB Flash, 2KB SRAM, and 512 bytes EEPROM, running up to 64 MHz in a 20-pin SSOP package. The 'T' suffix indicates Tape & Reel packaging, 'I' is the industrial -40C to +85C temperature grade, and 'SS' denotes the 5.30 mm body 20-pin SSOP. This part is part of the PIC18-Q41 family, which integrates advanced analog peripherals including an on-chip operational amplifier, 12-bit ADC2, 8-bit DAC, 16-bit PWM, DMA, and Peripheral Pin Select (PPS) for sensor and real-time control applications. An 8-bit microcontroller (MCU) is a programmable integrated circuit that executes instructions from on-chip Flash memory using an 8-bit data path. PIC18 devices sit in Microchip's mid-range 8-bit portfolio above baseline PIC10/12/16 parts, supporting self-programming, larger RAM/Flash, C-compiler friendly architecture, and richer peripherals. The PIC18-Q41 family extends this with high-performance analog and digital peripherals targeted at sensor signal conditioning and closed-loop control. Key features include 32 KB self-programmable Flash, 2 KB SRAM, 512 bytes EEPROM, 12-bit ADC with computation (ADC2), 8-bit DAC, two operational amplifiers, 16-bit PWM with complementary outputs, DMA controller, and Peripheral Pin Select. The device supports UART, SPI, I2C, and runs instruction cycles at 64 MHz (16 MIPS). The integrated op-amp lets designers implement gain stages, transimpedance amplifiers, and comparators without external analog ICs. Architecturally, the PIC18F15Q41 uses Microchip's enhanced Harvard architecture with 16-bit opcodes and an 8-bit data path, plus hardware multiplier and priority interrupt controller. The ADC2 integrates oversampling, accumulation, and filtering hardware to reduce CPU overhead for sensor averaging. PPS remaps digital peripherals to any I/O pin, simplifying PCB layout. The 20-pin SSOP supports up to 17 I/O pins, leaving room for system expansion. Typical applications include industrial sensor signal conditioning, closed-loop fan/PWM control, LED lighting drivers, battery-powered IoT nodes, USB-to-UART bridges, and small motor control. The industrial temperature range suits factory automation and outdoor equipment. On-chip analog blocks reduce BOM cost for sensor-interface designs where a separate op-amp IC would otherwise be required. Design consideration: leverage the integrated op-amp and DAC for sensor biasing and offset cancellation rather than allocating PCB area to a discrete analog front-end. The DMA engine can move ADC samples to RAM without CPU intervention, freeing cycles for communication stacks. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design notes drawn from the PIC18-Q41 family datasheet and reference designs - material not collected on a single distributor product page.

Cotización Contacto
PIC18F16Q40-E/P - 8-bit 64MHz 64KB Flash MCU | Microchip DIP-20
PIC18F16Q40-E/P

PIC18F16Q40-E/P - 8-bit 64MHz 64KB Flash MCU | Microchip DIP-20

The Microchip Technology PIC18F16Q40-E/P is an 8-bit PIC18 RISC microcontroller running at up to 64 MHz, integrating 64 KB of Flash program memory, 4 KB of SRAM, and 512 bytes of EEPROM, all housed in a 20-pin PDIP through-hole package. The PIC18-Q40 family is engineered for real-time control and sensor applications, and this device is equipped with a 12-bit ADC with Computation (ADCC) that automates Capacitive Voltage Divider (CVD) techniques for advanced capacitive touch sensing, plus two 8-bit DAC modules and 16-bit Pulse-Width Modulation peripherals. A microcontroller (MCU) is a single-chip computer that contains a processor core, volatile and non-volatile storage, and programmable peripherals. Within the broader taxonomy, the PIC18F16Q40 sits inside the 8-bit MCU category (PIC -> 8-bit MCU -> microcontroller -> embedded processor -> semiconductor). Its 8-bit PIC18 Harvard architecture delivers deterministic interrupt latency and a rich instruction set, distinguishing it from 32-bit Cortex-M parts that trade latency determinism for higher MIPS throughput. Key features include a Direct Memory Access (DMA) controller that offloads data movement between peripherals and memory, Configurable Logic Cells (CLC) that emulate glue logic in firmware, Peripheral Pin Select (PPS) for flexible signal routing, plus UART, SPI, and I2C interfaces with hardware CRC support. The 12-bit ADCC supports oversampling, averaging, and threshold comparisons, enabling autonomous sensor acquisitions without CPU intervention. Typical applications include capacitive touch user interfaces, sensor signal conditioning, motor and lighting control via the 16-bit PWM, low-cost general-purpose embedded control, and educational/hobbyist projects where through-hole PDIP-20 simplifies hand-soldering and rework. Industrial designers use the -E (Extended) temperature grade for -40C to +125C environments. When designing with this part, evaluate whether 64 KB Flash, 4 KB RAM, and 64 MHz are sufficient headroom for your firmware. The PPS peripheral remapping requires careful pin assignment in MPLAB X IDE, and the 12-bit ADCC conversion rate must be verified against the selected FVR and reference settling time. This page synthesizes distributor pricing, drop-in package alternatives, and practical design notes that supplement the manufacturer datasheet.

Cotización Contacto
PIC18F16Q40-E/SO - 8-Bit 64MHz 64KB Flash MCU | Microchip
PIC18F16Q40-E/SO

PIC18F16Q40-E/SO - 8-Bit 64MHz 64KB Flash MCU | Microchip

The Microchip Technology PIC18F16Q40-E/SO is an 8-bit PIC18 microcontroller IC running up to 64 MHz, equipped with 64 KB of Flash program memory, 4 KB of SRAM, and 512 bytes of EEPROM, housed in a 20-pin SOIC (SO) package for surface-mount assembly. The device integrates a 12-bit ADC with Computation (ADC2), 8-bit DACs, 16-bit PWMs, Direct Memory Access (DMA), and Configurable Logic Cells (CLC), targeting compact real-time control and sensor-interface designs. Operating voltage spans 1.8 V to 5.5 V across an industrial temperature range of -40C to +125C. A microcontroller (MCU) is a single-chip computer containing a CPU core, non-volatile program memory (typically Flash), working RAM, and a rich set of peripherals such as timers, ADC/DAC, communication interfaces, and interrupt controllers. PIC18 microcontrollers use an 8-bit modified Harvard RISC architecture with a 16-bit instruction word, balancing deterministic interrupt response, low power consumption, and easy in-circuit reprogrammability. Within the broader taxonomy, the PIC18F16Q40 belongs to the 8-bit MCU family, which itself sits under the category of microcontrollers -> integrated circuits -> semiconductors. Key features of the PIC18F16Q40 include the on-chip 12-bit ADC2 with automated math and averaging functions, dual 8-bit DAC outputs, up to four 16-bit PWM channels with complementary and dead-band modes, hardware DMA for offloading CPU data movement, and CLC blocks that implement glue logic without external gates. The device also exposes peripherals such as I2C, SPI, UART with LIN, and configurable interrupt-on-change I/O, all in a 20-pin SOIC footprint. The Q40 silicon pairs an 8-bit PIC18 core running up to 64 MHz with CIP (Core Independent Peripherals) such as CLC, PWM, NCO, and DMA, enabling closed-loop control tasks such as sensor conditioning, LED driving, and motor commutation to run largely without CPU intervention. This frees the CPU to handle communications, application logic, or safety checks, while the integrated peripherals handle time-critical signal chains. Typical applications include IoT edge sensor nodes, BLDC and DC motor control, LED lighting controllers, battery-powered consumer devices, HVAC control boards, and industrial sensor-interface modules. The wide 1.8 V to 5.5 V supply range also supports direct connection to single-cell Li-ion or two-cell alkaline packs. When designing with this part, allocate the 20-pin SOIC budget carefully: many signals are multiplexed onto the same pin, so the PPS (Peripheral Pin Select) feature should be planned early. Always check the MPLAB X IDE project settings and ensure the configured oscillator and ICD pins match the board layout. This page synthesizes distributor pricing, drop-in alternatives, and design notes not found in the manufacturer datasheet.

Cotización Contacto
PIC18F16Q40-I/P - 64KB Flash 8-bit MCU 64MHz 20-PDIP | Microchip
PIC18F16Q40-I/P

PIC18F16Q40-I/P - 64KB Flash 8-bit MCU 64MHz 20-PDIP | Microchip

The Microchip Technology PIC18F16Q40-I/P is an 8-bit RISC PIC18 microcontroller with 64KB Flash, 64MHz CPU, 20-PDIP package, and a 12-bit ADC with Computation for real-time control. It integrates two 8-bit DACs, 16-bit PWMs, DMA, Configurable Logic Cells, and PPS in a compact 20-pin form factor. An 8-bit PIC microcontroller (MCU) is a Harvard-architecture RISC processor that combines a CPU, Flash program memory, RAM, EEPROM, and rich peripherals (ADC, PWM, UART, SPI, I2C) on a single die. Within the broader taxonomy, a PIC18 device sits above base-line PIC10/12/14 MCUs and below the 16-bit dsPIC/PIC24 family, occupying the high-performance segment of Microchip's 8-bit portfolio for real-time control. Key features include 64KB Flash (64K x 8), 4KB SRAM, 512 bytes EEPROM, a 12-bit ADC with Computation (ADCC) supporting Capacitive Voltage Divider (CVD) for advanced touch sensing, two 8-bit DAC modules, four 16-bit PWMs with edge-aligned and center-aligned modes, a 4-channel DMA controller, and Peripheral Pin Select (PPS) for flexible I/O mapping. Core-independent peripherals include Configurable Logic Cells (CLC), Complementary Waveform Generator (CWG), and Numerically Controlled Oscillator (NCO). The PIC18-Q40 architecture employs an 8-bit RISC core with a 16-bit instruction word, 31-level hardware stack, and a wide peripheral set designed for deterministic control loops. The 12-bit ADCC supports averaging, oversampling, threshold comparison, and hardware CVD, offloading signal-conditioning tasks from the CPU and reducing firmware complexity. Typical applications include capacitive touch user interfaces, LED lighting and color-mixing control, sensor signal conditioning with on-chip DSP, motor-control pre-driver stages, and compact IoT edge nodes requiring deterministic timing. The 20-PDIP through-hole package simplifies prototyping and breadboarding for hobbyist, educational, and lab-grade designs. When designing with this device, choose the 20-PDIP package variant (I/P) for through-hole prototyping or the I/SO or I/SS packages for SMD production. PPS must be carefully mapped because each digital function can be routed to multiple physical pins; consult the device family datasheet for the full PPS remap table. This page consolidates distributor pricing, pin-compatible alternatives, and design notes beyond what the manufacturer datasheet provides, helping engineers select and qualify the PIC18F16Q40-I/P for real-time control applications.

Cotización Contacto
PIC18F16Q40-I/SS - 8-bit 64MHz 64KB Flash MCU | Microchip | Real-Time Control
PIC18F16Q40-I/SS

PIC18F16Q40-I/SS - 8-bit 64MHz 64KB Flash MCU | Microchip | Real-Time Control

The Microchip Technology PIC18F16Q40-I/SS is an 8-bit PIC18 microcontroller featuring a 64 MHz CPU, 64 KB of Flash program memory, 4 KB of SRAM, and 512 bytes of EEPROM, housed in a 20-pin SSOP package. It is part of the PIC18-Q40 family targeted at real-time control and sensor-interface applications, integrating a 12-bit ADC with Computation (ADCC), two 8-bit DAC modules, 16-bit PWMs, DMA, Configurable Logic Cells (CLC), and multiple serial interfaces. A PIC18 microcontroller is a Harvard-architecture 8-bit RISC device from Microchip's PIC family, designed for deterministic real-time control. Within the broader taxonomy it belongs to the PIC18-Q40 sub-family, which sits above 8-bit PIC MCUs and below Microchip's 16-bit dsPIC and 32-bit families. The PIC18-Q40 family is specifically optimized for applications that combine analog signal conditioning (CVD touch, oversampling, threshold decision) with digital actuation (PWM, DMA-driven peripheral updates) on a single low-pin-count device. Key features of the PIC18F16Q40 include 12-bit ADCC with Capacitive Voltage Divider support, 16-bit PWM with multiple modes, two 8-bit DACs, Configurable Logic Cells for glue-logic replacement, on-chip DMA for low-CPU-overhead data movement, and a wide 1.8 V to 5.5 V operating voltage range. The device also integrates an internal oscillator, multiple communication peripherals (I2C, SPI, UART with LIN), and a vectored interrupt architecture with prioritized peripheral triggers. The 20-pin SSOP package supports 18 I/O pins. The 64 MHz system clock (with 4x PLL option on the internal 16 MHz HFINTOSC) provides 16 MIPS peak throughput, and the ADCC engine automates averaging, oversampling, and threshold comparison, offloading CPU work in sensor-fusion designs. The integrated 16-bit PWM combined with DMA enables jitter-free control loops for LED lighting, motor commutation, and switched-mode power stages. Typical applications include capacitive-touch user interfaces, LED lighting controllers, BLDC/PMSM small motor control, sensor signal conditioning, and low-cost general-purpose embedded control nodes in industrial and consumer systems. The Q40 family is also suited to functional-safety-adjacent designs where ADCC thresholds can implement hardware-decision paths. When designing with the PIC18F16Q40-I/SS, ensure the ICSP programming pins (PGx, PGM) are accessible on the layout and the MCLR pull-up is correctly biased. Use the ADCC burst-average mode for low-noise sensor reads and prefer DMA over CPU-driven peripheral servicing for tight timing budgets. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto
PIC18F16Q40T-I/REB - 64KB Flash 8-bit MCU, 20-VQFN | Microchip
PIC18F16Q40T-I/REB

PIC18F16Q40T-I/REB - 64KB Flash 8-bit MCU, 20-VQFN | Microchip

The Microchip Technology PIC18F16Q40T-I/REB is an 8-bit PIC18 microcontroller IC running at 64 MHz with 64 KB of FLASH program memory (64K x 8), packaged in a 20-pin VQFN (3x3 mm, exposed pad). It belongs to Microchip's PIC18-Q40 family, which targets compact, high-performance real-time control and sensor applications with built-in 12-bit ADC with computation, 8-bit DACs, 16-bit PWMs, DMA, and Configurable Logic Cells (CLC). An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path, optimized for deterministic control loops, low power consumption, and small footprint. Within the broader semiconductor hierarchy, the PIC18 sits as an enhanced mid-range family between baseline PIC10/12/16 and the 16-bit dsPIC/PIC24 families, serving applications that need more peripherals and code space than entry-level MCUs but do not justify a Cortex-M0 device. PIC18F16Q40 specifically adds a 12-bit ADC with computation engine, two 8-bit DACs, 16-bit PWMs, DMA, CLC, and Peripheral Pin Select (PPS), positioning it as a strong fit for motor control, lighting, power conversion, and sensor readout designs. Key features include 64 KB self-programmable Flash, 4 KB SRAM, 512 B EEPROM, 12-bit ADC with computation (ADCC), two 8-bit DACs, multiple 16-bit PWM channels, DMA, CLC, Peripheral Pin Select (PPS) for flexible pin mapping, and Microchip's eXtreme Low Power (XLP) modes for battery-driven designs. Connectivity is provided by I2C, SPI, and UART/USART peripherals, with standard PIC18 interrupt, brown-out reset, and watchdog timer support. The 20-pin VQFN (3x3 mm, REB suffix) package combines a small PCB footprint with an exposed thermal pad, simplifying thermal management and supporting the -40C to +85C industrial temperature range signified by the "I" code. The "T" suffix in the part number denotes Tape and Reel packaging. The architecture uses Microchip's enhanced mid-range 8-bit core with a 16-bit instruction word, an internal 64 MHz oscillator, and a vectored interrupt controller. The ADCC engine performs averaging, oversampling, and threshold comparisons in hardware, offloading signal conditioning from the CPU and enabling deterministic sensor response in closed-loop applications. Typical applications include BLDC and brushed motor control, LED lighting and color mixing, switch-mode power supply control loops, sensor signal conditioning with on-chip ADC computation, household appliances, and industrial IoT edge nodes. Its combination of small VQFN footprint and rich peripheral set makes it attractive where PCB area is constrained but analog and PWM resources are critical. When designing with PIC18F16Q40, leverage Peripheral Pin Select (PPS) to map UART/SPI/I2C pins to convenient locations and use the ADCC hardware features rather than software averaging to reduce CPU load. For low-power designs, use the XLP sleep and Idle modes combined with DMA to wake only on peripheral events. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that are not found in the manufacturer datasheet alone, helping engineers compare this part against PIC18F15Q41, PIC18F14Q41, and same-family VQFN-pin-compatible Microchip variants.

Cotización Contacto
PIC18F16Q40T-I/SO - 64KB Flash 8-bit MCU, 64MHz | Microchip
PIC18F16Q40T-I/SO

PIC18F16Q40T-I/SO - 64KB Flash 8-bit MCU, 64MHz | Microchip

The Microchip PIC18F16Q40T-I/SO is an 8-bit PIC microcontroller from the PIC18-Q40 family, featuring 64KB of Flash program memory, 4KB of SRAM, and 512 bytes of EEPROM in a 20-pin SOIC package. It operates at up to 64MHz core clock and integrates a 12-bit ADC with Computation (ADCC), 8-bit DACs, 16-bit PWMs with complementary waveform generation, Direct Memory Access (DMA), Configurable Logic Cells (CLC), and Peripheral Pin Select (PPS) for flexible signal routing. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash/RAM/EEPROM), and programmable peripherals on one die. Within the broader taxonomy, the PIC18F16Q40 belongs to the 8-bit microcontroller family, then to the general category of microcontrollers, and ultimately to embedded processors and semiconductors. The Q40 family specifically targets real-time control and sensor applications where deterministic ADC sampling, hardware PWM, and low-latency interrupt response are required - features that higher-level Cortex-M MCUs sometimes overspecify for cost-sensitive designs. Key features of the PIC18F16Q40T-I/SO include the 12-bit ADCC with hardware averaging and threshold detection, dual 8-bit DAC outputs, up to six 16-bit PWM channels with fine-resolution duty cycle control, 10-bit ADC reference, on-chip temperature sensor, and a wide operating voltage range of 2.3V to 5.5V. The DMA engine offloads data movement from the CPU, enabling efficient ADC-to-memory transfers for sensor acquisition loops. CLCs allow glue-logic replacement with configurable AND/OR/D-FF gates routed through the silicon, reducing external component count. The architecture is built on Microchip's enhanced Harvard PIC18 core with a modified 16-bit instruction word, providing deterministic instruction timing and dual-bus access to program and data memory. An 8x8 hardware multiplier accelerates signal-processing routines such as IIR/FIR filtering, while the vectored interrupt controller supports prioritized interrupts for motor-control and communication tasks. Typical applications include sensor signal conditioning with digital averaging, low-cost closed-loop DC motor or LED lighting control, consumer appliances with capacitive touch interfaces, USB-to-UART bridges using the CLC and PWM modules, industrial 4-20mA sensor transmitters, and battery-powered IoT sensor nodes leveraging the 4 nA sleep current. When designing with this MCU, prioritize peripheral pin select (PPS) remapping early in PCB layout - assigning UART, SPI, or PWM functions to available physical pins reduces the need for board respins. Also reserve the ICD pins (PGC/PGD) on dedicated trace paths for in-circuit debug without interfering with signal integrity. This page synthesizes distributor pricing, drop-in alternatives within the same SOIC-20 footprint, and practical design notes beyond what the manufacturer datasheet alone provides, enabling faster component selection and BOM risk reduction.

Cotización Contacto
PIC18F16Q40T-I/SS - 8-bit 64MHz 64KB Flash MCU | Microchip
PIC18F16Q40T-I/SS

PIC18F16Q40T-I/SS - 8-bit 64MHz 64KB Flash MCU | Microchip

The Microchip Technology PIC18F16Q40T-I/SS is an 8-bit PIC18 microcontroller in the compact, high-performance PIC18-Q40 family, delivering 64 MHz CPU performance, 64 KB of Flash program memory, 4 KB of SRAM, and 512 bytes of EEPROM in a 20-pin SSOP package. The part carries the industrial -40C to +85C temperature rating and ships on Tape & Reel for high-volume SMT assembly. The integrated 12-bit ADC with Computation (ADCC), dual 8-bit DACs, 16-bit PWMs, Direct Memory Access (DMA), and Configurable Logic Cells (CLC) target real-time control and sensor-interface designs. The PIC18-Q40 family belongs to the broader PIC18 8-bit RISC microcontroller lineage, which sits in the hierarchy: 8-bit microcontroller -> microcontroller unit (MCU) -> embedded processor -> semiconductor. PIC18 devices use an enhanced Harvard architecture with a RISC instruction set optimized for deterministic interrupt response and C-friendly addressing, making them well suited to mixed analog/digital signal-chain applications that must remain responsive while servicing sensors, communication stacks, and PWMs. Key features include 64 MHz operation from a 2.5 V / 3.3 V / 5 V supply, a 12-bit ADCC capable of automated averaging, threshold comparison, and oversampling, two 8-bit DAC outputs, multi-channel 16-bit PWMs with complementary and dead-band modes, up to four CLC blocks for hardware glue logic, a DMA controller that offloads core-driven memory copies, and standard PIC18 peripherals such as EUSART, I2C, SPI, and multiple timers. The 20-pin SSOP exposes 17 I/O lines, giving designers enough analog and digital channels for typical sensor-node designs. Architecturally, the device uses the enhanced PIC18 core with 16-bit instructions, a 31-level hardware stack, a hardware multiplier, and a vectored interrupt controller. Memory protection, an on-chip debugger (ICD), and Microchip's MPLAB X toolchain compatibility shorten firmware development cycles for embedded engineers. Typical applications include industrial sensor conditioning, motor and lighting control loops, IoT edge nodes, consumer white goods, and battery-powered instrumentation that benefits from the ADCC + DAC + 16-bit PWM combination. When designing with the PIC18F16Q40T-I/SS, observe the absolute maximum ratings in the datasheet (e.g. VDD max, ESD ratings), decouple VDD/VSS with 100 nF + bulk capacitors placed within 5 mm of the pins, and route the analog supply separately from noisy digital I/O to fully exploit the 12-bit ADCC SNR. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes that go beyond what the manufacturer datasheet alone provides, helping procurement and engineering teams shortlist and qualify the part faster.

Cotización Contacto
PIC18F16Q41-E/SO - 8-Bit 64MHz 64KB Flash MCU 20-SOIC | Microchip
PIC18F16Q41-E/SO

PIC18F16Q41-E/SO - 8-Bit 64MHz 64KB Flash MCU 20-SOIC | Microchip

The Microchip Technology PIC18F16Q41-E/SO is an 8-bit PIC18 microcontroller with 64KB Flash, 4KB RAM, and 512B EEPROM, operating at up to 64MHz in a 20-pin SOIC package. It integrates advanced analog peripherals including a 12-bit ADC with Computation (ADCC), two 8-bit DACs, an operational amplifier, and 16-bit PWM, making it suited for sensor and real-time control applications. An 8-bit microcontroller (MCU) is a compact, single-chip computer that executes instructions on 8-bit data words using a Harvard or von Neumann architecture. The PIC18 family from Microchip uses a modified Harvard RISC core and is widely used for embedded control. Within the taxonomy, PIC18 belongs to 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. MCUs sit alongside DSPs, FPGAs, and application processors as the lowest-power tier of programmable logic, typically integrating CPU, memory (Flash/RAM/EEPROM), and peripherals on a single die. Key features include 64KB self-programmable Flash program memory, 4KB SRAM data memory, 512B EEPROM, 12-bit ADCC with capacitive voltage divider (CVD) support for touch sensing, two 8-bit DAC modules, an internal op-amp, configurable logic cells (CLC), and 16-bit PWM with complementary outputs. The 20-pin SOIC variant provides 18 general-purpose I/O pins, supporting ADC, DAC, PWM, and serial communication peripherals including UART, SPI, and I2C. Architecturally, the PIC18-Q41 family employs an enhanced mid-range core capable of executing 16-bit instructions, providing up to 16 MIPS at 64MHz. The ADCC peripheral offloads signal conditioning by handling averaging, oversampling, and threshold comparisons in hardware. Integrated peripherals (op-amp, two DACs, CLC, PWM) reduce external component count, while the CVD-capable ADC supports robust capacitive touch sensing with noise-immunity algorithms. Typical applications include capacitive touch user interfaces, IoT sensor nodes, LED lighting control with high-resolution PWM, industrial process controllers, low-cost medical monitoring peripherals, and battery-powered smart-home devices. The wide operating voltage range (1.8V to 5.5V) supports both 3.3V and 5V system rails. When designing with this MCU, ensure decoupling caps (100nF + 1uF) are placed within 5mm of VDD/VSS pairs. For capacitive touch, route the CVD traces with adequate ground shielding and follow Microchip application note AN1478 for noise-immune sensor layout. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that complement the manufacturer datasheet with information not collected in a single Microchip document.

Cotización Contacto
PIC18F16Q41-E/SS - 8-Bit MCU 64MHz 64KB Flash | Microchip
PIC18F16Q41-E/SS

PIC18F16Q41-E/SS - 8-Bit MCU 64MHz 64KB Flash | Microchip

The Microchip Technology PIC18F16Q41-E/SS is an 8-bit PIC18 microcontroller IC running up to 64 MHz with 64 KB (64K x 8) of Flash program memory, 4 KB of SRAM, and 512 bytes of EEPROM, housed in a 20-pin SSOP package. A PIC microcontroller is a Harvard-architecture RISC-based 8-bit MCU family widely used in embedded control. It belongs to the broader hierarchy: microcontroller -> embedded processor -> semiconductor IC. The PIC18 instruction set offers 75 instructions with a 16-bit-wide instruction word and 8-bit data path, optimized for deterministic real-time control and low-power operation. The PIC18F16Q41 integrates advanced analog peripherals including a 12-bit ADC with Computation (ADCC) supporting Capacitive Voltage Divider (CVD) for capacitive touch sensing, two 8-bit DAC modules, an on-chip operational amplifier, and 16-bit PWM. The -E/SS suffix denotes the Extended (-40C to +125C) temperature grade in a 20-pin SSOP package. Core peripherals include multiple communication interfaces such as UART, SPI, and I2C for connectivity to sensors and actuators. Built on Microchip's enhanced mid-range PIC18 core, the device achieves 64 MHz operation from an internal oscillator block, eliminating the need for an external crystal in many designs. The ADCC automates averaging, filtering, oversampling, and threshold comparison, offloading signal-conditioning tasks from the CPU. Internal peripherals are mapped via the Peripheral Pin Select (PPS) feature, allowing flexible signal routing in space-constrained 20-pin designs. Typical applications include capacitive touch user interfaces, sensor signal conditioning with on-chip op-amp gain stages, LED lighting control using 16-bit PWM, low-cost motor control, and IoT edge nodes with UART/SPI connectivity. The integrated 12-bit ADC and CVD front-end make the PIC18F16Q41 well-suited for replacing discrete analog sensor front-ends with a single MCU. When designing with this part, leverage the internal 64 MHz HFINTOSC to minimize BOM cost; supply decoupling requires a 100 nF capacitor close to each VDD pin plus a bulk capacitor. For capacitive touch applications, follow Microchip's mTouch CVD layout guidelines to minimize parasitic capacitance and humidity drift.

Cotización Contacto
PIC18F16Q41-I/P - 8-bit 64MHz MCU, 64KB Flash | Microchip
PIC18F16Q41-I/P

PIC18F16Q41-I/P - 8-bit 64MHz MCU, 64KB Flash | Microchip

The Microchip Technology PIC18F16Q41-I/P is a compact, high-performance 8-bit PIC18 microcontroller with 64KB Flash, 4KB SRAM, and 512 bytes EEPROM, operating at up to 64MHz from a 1.8V to 5.5V supply. It is housed in a 20-pin PDIP through-hole package and is designed for advanced sensor and real-time control applications with on-chip analog peripherals including a 12-bit ADC with Computation (ADCC), two 8-bit DACs, and an operational amplifier. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), data memory (SRAM/EEPROM), and peripherals such as ADCs, timers, and communication interfaces. The PIC18 architecture is a Harvard RISC family, with each instruction executing in one oscillator cycle. The PIC18-Q41 sub-family sits within Microchip's broad 8-bit portfolio, optimized for applications that demand integrated analog signal conditioning without external op-amps or ADCs. Hypernyms: microcontroller -> embedded controller -> semiconductor IC. Key features include a 12-bit ADCC supporting capacitive voltage divider (CVD) touch sensing, averaging, filtering, oversampling, and threshold comparison; two 8-bit DAC modules for analog output; an integrated op-amp for signal conditioning; up to 16 KB of core-independent peripherals; DMA for offloading data movement; 16-bit PWM with multiple complementary outputs; and Peripheral Pin Select (PPS) for flexible I/O mapping. The device also supports UART, SPI, and I2C communication, along with an 8-bit parallel port on select variants. Architecturally, the PIC18F16Q41 leverages an enhanced mid-range core with a hardware multiplier, multiply-accumulate (MAC) instructions, and configurable instruction cache, enabling deterministic real-time response at 64MHz. The 12-bit ADCC extends basic ADC functionality with automated post-processing, allowing touch and sensor measurements to run without CPU intervention. This combination reduces firmware complexity while improving measurement repeatability. Typical applications include capacitive touch user interfaces, sensor signal conditioning nodes, LED lighting control, small motor control loops, battery-powered IoT end nodes, and consumer appliance front panels. Its wide operating voltage range (1.8V to 5.5V) makes it compatible with both lithium-cell and 5V regulated rails. When designing with this device, allocate one of the available PWM channels for any switching power stage and use PPS to reassign peripheral functions if board layout requires. A 0.1uF decoupling capacitor placed within 5mm of each VDD pin is mandatory for ADC accuracy. This page synthesizes distributor pricing, drop-in alternatives within the PIC18-Q41 family, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
PIC18F16Q41-I/SO - 8-Bit MCU, 64KB Flash, 64MHz, 20-SOIC | Microchip
PIC18F16Q41-I/SO

PIC18F16Q41-I/SO - 8-Bit MCU, 64KB Flash, 64MHz, 20-SOIC | Microchip

The Microchip PIC18F16Q41-I/SO is an 8-bit PIC18-family microcontroller delivering 64 MIPS performance from a 64 MHz internal oscillator and integrating 64 KB of Flash, 4 KB of SRAM and 512 bytes of EEPROM in a 20-pin SOIC package. The -I temperature grade targets industrial operation from -40C to +85C, and the part carries the standard Microchip brown-out reset, watchdog timer and in-circuit serial programming hardware. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path, typically used in cost-sensitive embedded designs that do not require 32-bit performance. Within the broader taxonomy it sits under microcontroller -> embedded processor -> semiconductor device, and is best understood as a system-on-chip combining CPU core, non-volatile program memory (Flash), volatile working memory (SRAM), EEPROM for parameter storage, and a peripheral set tuned to a target application space. Key features of the PIC18F16Q41 include a 12-bit ADC with Computation (ADCC) that automates capacitive voltage divider (CVD) touch sensing, two 8-bit DACs with output buffering, an on-chip operational amplifier for signal conditioning, a 16-bit PWM with multiple complementary outputs, and Core Independent Peripherals (CIPs) such as CLC, NCO and 16-bit timer. The integrated op-amp eliminates an external analog front-end stage, which both reduces BOM cost and shrinks PCB area in sensor and motor-control designs. The architecture uses a Harvard RISC core with a modified instruction set and a 16-bit instruction word, giving predictable single-cycle execution except for program branches. The ADCC subsystem offloads averaging, oversampling and threshold comparison from the CPU, freeing core cycles for communication and supervisory tasks. Memory is partitioned with separate Flash and EEPROM buses, supporting >100k erase/write cycles on program memory and 1M cycles on EEPROM. Typical applications are capacitive-touch user interfaces, low-cost sensor signal conditioning, LED lighting controllers and small brushed-DC motor or fan controllers. The 20-SOIC footprint simplifies hand-prototyping and rework versus QFN, while still offering the analog density needed for sensor signal chains. When using this part, allocate dedicated PCB area for the ICSP header so that in-circuit debugging and field firmware updates remain possible after board assembly. The op-amp output stage is not rail-to-rail, so biasing must respect the input common-mode and output swing limits documented in the datasheet electrical characteristics table. This page compiles distributor pricing, drop-in same-package alternatives from the PIC18-Q41 family and the broader PIC18F line, plus design notes that extend beyond what is printed in the manufacturer datasheet - intended to help engineers shorten component-selection time.

Cotización Contacto