Microcontroladores

Productos (19360)

PIC18F452-E/ML - 8-bit MCU, 32KB Flash, 40MHz, 44-QFN | Microchip
PIC18F452-E/ML

PIC18F452-E/ML - 8-bit MCU, 32KB Flash, 40MHz, 44-QFN | Microchip

The Microchip Technology PIC18F452-E/ML is an 8-bit RISC CMOS FLASH-based microcontroller delivering 10 MIPS (100 ns instruction execution) at 40 MHz, packaged in a 44-lead QFN (8x8 mm) with 32KB of program memory (16K x 16) and 1536 bytes of RAM. The -E suffix denotes the Extended industrial temperature grade (-40C to +125C), and /ML denotes the lead-free QFN surface-mount package. What is a PIC18F 8-bit microcontroller? The PIC18F family is Microchip's high-performance 8-bit architecture built on a Harvard RISC core, upward compatible with PIC16C5X/PIC12CXXX/PIC16CXX/PIC17CXX devices. It targets mid-range embedded designs requiring more code space, more peripherals, and faster throughput than the PIC16F baseline. In the broader taxonomy: PIC18F -> 8-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. This positioning makes it a workhorse for industrial control, instrumentation, and automotive subsystems. Key features include 256 bytes of EEPROM, self-programming capability, an ICD (In-Circuit Debugger) interface, two Capture/Compare/PWM modules, an 8-channel 10-bit Analog-to-Digital converter, and a synchronous serial port configurable as either 3-wire SPI or 2-wire I2C. The C-compiler-friendly instruction set contains only 77 single-word instructions, lowering the learning curve for new firmware developers. Architecturally, the PIC18F452 integrates a 16-bit wide instruction path with separate program and data buses, enabling single-cycle instruction fetch plus ALU operation in most cases. The 10-bit ADC with 8 channels supports acquisition of mixed analog signals from sensors, while the dual PWM modules provide flexible motor or power control. The extended temperature grade (E) plus QFN package make it suitable for thermally constrained or vibration-prone environments. Typical applications include industrial automation controllers, HVAC peripherals, automotive body modules, sensor signal conditioning, and battery-powered metering. The combination of EEPROM storage and self-programming also supports field-upgradeable end products. When designing with this device, ensure the 44-QFN exposed pad is properly soldered to a sufficiently large copper pour for thermal dissipation; QFN packages require careful PCB layout to avoid tombstoning. For new designs, consider the pin-compatible PIC18F4520 family which offers enhanced peripherals and nanoWatt technology for lower sleep current. This page synthesizes distributor pricing, drop-in alternatives from the PIC18F family, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
PIC18F452-E/P - 8-Bit 40MHz Flash MCU | Microchip Technology
PIC18F452-E/P

PIC18F452-E/P - 8-Bit 40MHz Flash MCU | Microchip Technology

The Microchip Technology PIC18F452-E/P is an 8-bit CMOS Flash microcontroller with a 40 MHz clock speed, 32 KB of Flash program memory, 1536 bytes of RAM, 256 bytes of EEPROM, and 34 I/O pins in a 40-pin PDIP package. It also provides eight 10-bit analog-to-digital converter channels, two capture/compare/PWM modules, and serial interfaces configurable for SPI or I2C. A microcontroller is a programmable integrated circuit that combines a CPU core, memory, digital I/O, timers, communications peripherals, and analog conversion functions on one semiconductor die. The PIC18F452 belongs to the PIC18 8-bit microcontroller family, which is part of the broader embedded-controller hierarchy: PIC18 MCU, 8-bit microcontroller, embedded controller, and embedded semiconductor. This integration allows one device to replace separate processor, timer, communications, and analog-interface components in compact control systems. Key features include 10 MIPS execution performance, a 77-instruction single-word instruction set, 32 KB of self-programmable Flash memory, 1536 bytes of data RAM, and 256 bytes of EEPROM. The eight-channel 10-bit ADC supports analog sensor acquisition, while the configurable serial peripheral interface supports either 3-wire SPI or 2-wire I2C communication. The operating supply range shown in the verified data is 4.2 V to 5.5 V. The PIC18F452 architecture provides one 8-bit and three 16-bit timers, as identified by the supplied technical references, together with programmable digital I/O and PWM resources. These peripherals make it possible to measure time, capture input events, generate PWM outputs, acquire analog signals, and communicate with external sensors or controllers without requiring separate logic devices. Its Flash-based program memory also supports field reprogramming when the application requires self-programming. Typical applications include industrial process-control equipment, environmental monitoring, data acquisition, appliance controllers, instrumentation, and compact embedded products. The eight ADC channels are useful for temperature, pressure, level, and other analog measurements, while SPI and I2C permit connection to displays, sensors, memory devices, and communication transceivers. Its 34 I/O pins also provide ample control and monitoring capacity for moderately complex embedded systems. Designers should preserve adequate decoupling around the supply pins and route oscillator, reset, analog, and communication signals according to the manufacturer’s recommendations. Firmware must also account for the PIC18F452’s peripheral configuration, interrupt behavior, ADC acquisition requirements, and operating voltage range. The -E grade and PDIP package should be checked against production temperature, environmental, and board-assembly requirements before design release. This page consolidates the verified manufacturer and distributor information, distinguishes the available same-package alternatives, identifies missing pricing and package-level details, and adds practical application guidance that is not presented as a substitute for the complete Microchip PIC18FXX2 Data Sheet 39564c.

Cotización Contacto
PIC18F452-I/L - 8-bit 40MHz 32KB Flash MCU | Microchip 44-PLCC
PIC18F452-I/L

PIC18F452-I/L - 8-bit 40MHz 32KB Flash MCU | Microchip 44-PLCC

The Microchip Technology PIC18F452-I/L is an 8-bit enhanced flash microcontroller from the PIC18F family, operating at up to 40 MHz (10 MIPS) and packaged in a 44-pin PLCC (16.59 x 16.59 mm) form factor. It integrates 32 KB of flash program memory (16K x 16), 1536 bytes of SRAM, and 256 bytes of EEPROM, and exposes 34 I/O pins suitable for embedded control. A microcontroller is a single-chip computer that combines a CPU, memory, and programmable peripherals. The PIC18F452 belongs to the 8-bit MCU class within the broader microcontroller hierarchy (8-bit MCU -> MCU -> embedded processor -> semiconductor). Its enhanced PIC18 core offers 77 single-word instructions and C-compiler-friendly architecture, making it popular for both educational and industrial designs. Key features include eight channels of 10-bit analog-to-digital conversion, two capture/compare/PWM modules, an MSSP configurable as SPI or I2C, a USART, an ICD (in-circuit debugger) interface, and self-programming flash. Operating voltage spans 4.2 V to 5.5 V, and the device supports nanoWatt power management for low-power applications. The architecture is a Harvard-type RISC design with a 16-bit instruction word and an 8-bit data path, allowing 100 ns instruction execution at 40 MHz. The wide operating range and rich peripheral set make it suitable for industrial automation, motor control, sensor conditioning, and consumer products requiring deterministic real-time response without an external DSP. Typical applications include industrial control panels, HVAC systems, motor-control boards, USB-to-serial bridges with an external interface IC, and instrumentation front-ends. Designers value the PIC18F452 for upward code compatibility with PIC16C5X, PIC12CXXX, PIC16CXX, and PIC17CXX devices. A key design consideration is the operating voltage: the 'I' suffix denotes an industrial temperature range of -40 C to +85 C and 4.2 V to 5.5 V supply. Designers migrating to the 'LF' variant must account for the 2.0 V to 5.5 V extended range. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet, supporting faster BOM decisions and supply-chain risk mitigation for the PIC18F452-I/L.

Cotización Contacto
PIC18F452-I/P - 8-bit 40MHz 32KB Flash MCU 40-PDIP | Microchip
PIC18F452-I/P

PIC18F452-I/P - 8-bit 40MHz 32KB Flash MCU 40-PDIP | Microchip

The Microchip Technology PIC18F452-I/P is an 8-bit PIC18F-family CMOS Flash microcontroller delivering up to 10 MIPS (40 MHz) performance in a 40-pin PDIP (0.600") through-hole package. It integrates 32 KB of Flash program memory (16K x 16), 1536 bytes of SRAM, and 256 bytes of EEPROM data memory. A microcontroller (MCU) is a single-chip computer containing a processor core, program and data memory, plus configurable peripherals. PIC18F devices belong to Microchip's 8-bit PIC family, which combines RISC architecture with C-compiler-friendly instruction set and NanoWatt power management. Within the broader taxonomy, PIC18F452 sits under Microcontroller (MCU) -> 8-bit MCU -> PIC18F enhanced Flash family -> embedded computing IC -> semiconductor. Key features include 34 digital I/O pins, an 8-channel 10-bit Analog-to-Digital Converter (ADC), two Capture/Compare/PWM (CCP) modules, an enhanced USART supporting RS-232/RS-485, a Master Synchronous Serial Port configurable as SPI (3-wire) or I2C (2-wire), one 8-bit and three 16-bit timers, self-programming capability, and ICD in-circuit debugging support. Operating voltage spans 4.2 V to 5.5 V across the industrial -40C to +85C temperature range. The PIC18F452 uses an enhanced Harvard architecture with a 16-bit instruction word and separate program/data buses, achieving 100 ns instruction execution. The 77 single-word instruction set simplifies C compiler code generation while the 16-level hardware stack and 8 x 8 hardware multiplier accelerate arithmetic throughput. NanoWatt technology adds multiple power-managed modes (Idle, Sleep) for battery-aware designs. Typical applications include industrial control panels, HVAC and appliance controllers, sensor signal conditioning nodes, RS-232/RS-485 sensor gateways, motor control interfaces (using CCP/PWM), low-cost data acquisition with on-chip ADC, and educational/COMPILER development platforms. The wide 4.2-5.5 V range also suits USB-powered and 5 V bus systems. When designing with this part, ensure oscillator stability (HS or XT modes), use adequate decoupling (100 nF near each VDD/VSS pair), and verify ADC acquisition time settings for chosen source impedance. Note the I/P suffix denotes industrial temperature grade and PDIP-40 package. This page synthesizes distributor pricing across DigiKey, Mouser and LCSC, drop-in PIC18F alternatives, and practical design notes that are not found in the standalone manufacturer datasheet.

Cotización Contacto
PIC18F452-I/PT - 8-Bit 40MHz 32KB Flash MCU 44-TQFP | Microchip
PIC18F452-I/PT

PIC18F452-I/PT - 8-Bit 40MHz 32KB Flash MCU 44-TQFP | Microchip

The Microchip Technology PIC18F452-I/PT is a high-performance 8-bit PIC18 microcontroller running at 40MHz (10 MIPS) with 32KB of Flash program memory and 1.5KB of RAM, housed in a 44-pin TQFP (10x10 mm) package. It integrates 256 bytes of EEPROM, 34 digital I/O lines, and 8 channels of 10-bit Analog-to-Digital conversion, making it a versatile single-chip solution for embedded control systems. A microcontroller (MCU) is an integrated circuit combining a CPU, non-volatile program memory (Flash/ROM), volatile data memory (RAM), and configurable peripherals (timers, ADC, communication ports) on a single silicon die. MCUs form the lowest tier of the computing hierarchy, embedded beneath microprocessors in everything from consumer appliances to industrial controllers, and they execute firmware directly from on-chip Flash rather than external memory. The PIC18 family is Microchip's high-tier 8-bit line, providing 16-bit-wide instructions and a C compiler-friendly architecture. Key features of the PIC18F452-I/PT include a 10 MIPS execution rate (100 ns instruction cycle), 256 bytes of data EEPROM, an ICD-friendly In-Circuit Debugger interface, two Capture/Compare/PWM modules, a Master Synchronous Serial Port configurable as either 3-wire SPI or 2-wire I2C, and a USART with 9-bit address masking. The device supports self-programming, allowing firmware upgrades in the field without external programmer hardware, and it consumes microamp-range currents in Sleep mode through nanoWatt technology. Architecturally, the PIC18F452 uses an enhanced Harvard architecture with separate program and data buses, a 16-bit instruction word (vs 14-bit in PIC16), and a hardware multiplier capable of 8x8 single-cycle operations. Its 40 MHz internal clock can be derived from crystals, resonators, or internal RC oscillators, and the wide 4.2V to 5.5V supply range suits both battery and line-powered designs. Typical applications include industrial automation controllers, automotive body and HVAC modules, consumer appliance control boards, low-end data acquisition systems, and educational/development platforms where code portability from older PIC16/PIC17 designs is required. The 8-channel ADC is well matched to sensor multiplexing in instrumentation. When designing with this device, note that the 40-pin PDIP and 44-pin TQFP variants share the same peripheral set but differ in available I/O count; the TQFP version exposes all 34 I/O pins including additional high-priority interrupts. Always provide adequate decoupling (0.1 uF + 10 uF bulk) near VDD/AVDD/VSS pins.

Cotización Contacto
PIC18F4520-E/ML - 8-bit 25MHz 32KB Flash MCU, 44-QFN | Microchip
PIC18F4520-E/ML

PIC18F4520-E/ML - 8-bit 25MHz 32KB Flash MCU, 44-QFN | Microchip

The Microchip Technology PIC18F4520-E/ML is an 8-bit enhanced flash microcontroller from the PIC18F family, delivering up to 10 MIPS performance at 3V in a 44-pin QFN (8x8 mm) surface-mount package. It integrates 32KB of Flash program memory, 1536 bytes of SRAM, and 256 bytes of EEPROM data memory, with a 25 MHz (40 MHz input clock) CPU core. The -E suffix denotes the extended industrial temperature grade (-40C to +125C operating range). A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile data memory (SRAM), peripherals (timers, ADC, communication ports), and interrupt logic on one die. Within the broader taxonomy, MCUs sit under microprocessors, themselves a subset of processors and digital logic integrated circuits. PIC18F-series microcontrollers use Microchip's enhanced Harvard RISC architecture with C-compiler-optimized instruction set and a single-cycle hardware 8x8 multiplier, balancing deterministic real-time control with code density. The PIC18F4520 specifically occupies the high-pin-count, high-memory tier of the PIC18F2x20/4x20 family and is pin-compatible with the PIC18F4420 and PIC18F2520 footprints. Key differentiating features of the PIC18F4520-E/ML include: 36 digital I/O pins across five ports (RA, RB, RC, RD, RE), a 10-bit ADC with up to 13 input channels, two analog comparators, two CCP modules plus one ECCP (enhanced capture/compare/PWM), three 16-bit timers plus one 8-bit timer, hardware USART (EUSART), MSSP (SPI/I2C), a 31 kHz to 8 MHz internal oscillator block with 4x PLL (up to 32 MHz), fail-safe clock monitor, separate watchdog RC oscillator, and nanoWatt power management with idle and sleep modes. This is a complete set of legacy-friendly peripherals in a small 8x8 mm QFN. Architecturally, the PIC18F4520 implements an enhanced 16-bit instruction word with 8-bit data path, single-cycle hardware multiply, and a 32-level hardware stack. The internal oscillator and 4x PLL allow designs without an external crystal while still meeting timing requirements for 10 MIPS operation. nanoWatt technology provides dynamic clock switching and selective peripheral control for battery-friendly sleep currents. The device operates from 4.2V to 5.5V (extended temperature variant). Typical applications include industrial control boards, sensor signal conditioning front-ends, low-power motor control, USB-free legacy embedded systems (where the PIC18F4550 is preferred if USB is needed), HVAC thermostats, educational and prototyping platforms, and retrofits of PIC16F877A designs where higher performance and additional peripherals are required. The 44-QFN (ML) variant is preferred for compact, surface-mount assemblies where the larger 44-TQFP or 40-PDIP footprints are too tall or too large. Design tip: the 44-pin QFN (8x8 mm) has an exposed thermal pad that must be soldered to the PCB ground plane for electrical and thermal performance - do not leave the e-pad floating. Provide adequate input bulk capacitance on VDD and AVdd to support ADC accuracy. Use the internal oscillator with PLL for cost-sensitive designs, but reserve an external crystal footprint if the application requires USB-grade clock accuracy or fail-safe clock monitor switching.

Cotización Contacto
PIC18F4520-E/P - 8-Bit 40MHz 32KB Flash MCU DIP-40 | Microchip
PIC18F4520-E/P

PIC18F4520-E/P - 8-Bit 40MHz 32KB Flash MCU DIP-40 | Microchip

The Microchip Technology PIC18F4520-E/P is an 8-bit RISC microcontroller based on the enhanced PIC18 architecture, delivering up to 10 MIPS performance at 3V in a 40-pin PDIP through-hole package. It integrates 32KB of Flash program memory, 1536 bytes of SRAM, and 256 bytes of EEPROM, with 36 digital I/O pins and a 13-channel 10-bit ADC. An 8-bit microcontroller (MCU) is a single-chip computer that combines a CPU, memory (Flash, SRAM, EEPROM), peripherals (ADC, timers, UART, SPI, I2C), and I/O on a single silicon die. Within the broader taxonomy, the PIC18F4520 belongs to: microcontroller -> 8-bit MCU -> enhanced Flash MCU -> RISC MCU -> embedded controller -> semiconductor IC. The PIC18F family is widely adopted for cost-sensitive, deterministic embedded designs and sits between the older PIC16 mid-range family and the 16-bit dsPIC/PIC24 families in Microchip's portfolio. Key features of the PIC18F4520 include a hardware 8x8 single-cycle multiplier, nanoWatt power management with multiple idle/sleep modes, a fail-safe clock monitor, and an internal 31 kHz to 8 MHz oscillator block with 4x PLL (for system clock up to 40 MHz). Four 16-bit timers/counters, two capture/compare/PWM modules, an enhanced USART, MSSP (SPI/I2C), and a parallel slave port round out the peripheral set. EUSART and PWMs are commonly used for motor and sensor interfacing. The architecture uses a 16-bit instruction word with an 8-bit data path, providing C-compiler-friendly RISC design while retaining the deterministic interrupt latency PIC MCUs are known for. The wide 4.2V to 5.5V operating range simplifies integration with 5V sensors and drivers, while 1.8V to 3.6V operation at reduced clock is supported for low-power designs. nanoWatt technology can drop supply current below 1 uA in sleep mode. Typical applications include industrial control panels, HVAC thermostats, motor control (BLDC/fan/pump), low-end embedded data acquisition, smart metering, automotive body electronics, and USB-to-UART bridges when paired with an external PHY. The 40-pin PDIP footprint remains popular for through-hole prototype boards, educational platforms, and replacement of legacy 8051 designs. When designing with this part, choose the industrial temperature grade (-40C to +125C) for outdoor/automotive use; the E suffix here denotes the extended temperature range. Ensure decoupling capacitors are placed within 5 mm of the VDD/VSS pins and verify oscillator start-up time under your load conditions before locking the BOM. This page synthesizes distributor pricing as of 2026-09-27, drop-in DIP-40 alternatives, and practical design notes that complement the manufacturer datasheet for engineers evaluating legacy PIC18 designs.

Cotización Contacto
PIC18F4520-E/PT - 8-bit MCU 32KB Flash 40MHz TQFP-44 | Microchip
PIC18F4520-E/PT

PIC18F4520-E/PT - 8-bit MCU 32KB Flash 40MHz TQFP-44 | Microchip

The Microchip Technology PIC18F4520-E/PT is an 8-bit RISC microcontroller from the PIC18 family featuring a 32KB Flash program memory, 1536 bytes of SRAM, 256 bytes of EEPROM, and a maximum CPU clock speed of 40 MHz (10 MIPS), housed in a 44-pin TQFP (PT) surface-mount package. It integrates 36 digital I/O pins, thirteen 10-bit ADC channels, two CCP/PWM modules, four timers, two analog comparators, and a USART with an enhanced addressable USART for robust serial communications. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash/ROM), data memory (RAM/EEPROM), and a fixed set of peripherals onto one silicon die. 8-bit MCUs sit under the broader category of microcontrollers, which in turn belong to the embedded computing and semiconductor taxonomy. The PIC18 family's RISC architecture executes most instructions in a single 200 ns cycle (4 clock periods at 40 MHz), giving it deterministic timing for control loops. The 10-bit ADC allows direct sensing of analog signals (temperature, current, voltage), while the nanoWatt power-management modes extend battery life in always-on designs. Key differentiators include the Enhanced Flash program memory (In-Circuit Serial Programming via two pins, allowing firmware update without removing the chip), 100K erase/write cycle endurance on the Flash, and an industrial-grade -40C to +125C operating temperature range ("E" temperature suffix). Hardware peripherals such as the Parallel Slave Port enable high-throughput memory-mapped transfers to external devices, while the Master Synchronous Serial Port (MSSP) module supports SPI and I2C interfaces. The integrated 10-bit ADC can reach 100K samples per second, suitable for closed-loop control in motor and power-conversion applications. Typical applications include industrial automation and process control, automotive body and accessory ECUs, HVAC controller boards, sensor signal conditioning front ends, and consumer appliances requiring cost-sensitive 8-bit control with on-chip peripherals. The 5V native I/O also makes the part well suited to legacy 5V system designs. When designing with this device, evaluate vectored interrupt latency and register-bank switching overhead - these architectural choices favor bit-manipulation and GPIO-heavy code, with weaker fit for large arithmetic or DSP workloads. This page synthesizes distributor pricing, drop-in alternatives, and application guidance beyond the manufacturer datasheet.

Cotización Contacto
PIC18F4520-I/P - 8-Bit 40MHz 32KB Flash MCU | Microchip | DIP-40
PIC18F4520-I/P

PIC18F4520-I/P - 8-Bit 40MHz 32KB Flash MCU | Microchip | DIP-40

The Microchip Technology PIC18F4520-I/P is a high-performance 8-bit PIC18 microcontroller featuring 32KB (16K x 16) of Flash program memory, 1.5KB RAM, and 256 bytes of EEPROM, operating at up to 40 MHz (10 MIPS) in a 40-pin PDIP through-hole package. The integrated peripherals include a 10-bit Analog-to-Digital Converter (ADC) with up to 13 channels, a USART, an MSSP supporting SPI and I2C, two comparators, capture/compare/PWM modules, and nanoWatt power-management technology for low-power applications. An 8-bit microcontroller (MCU) is a small computing device built around a CPU with an 8-bit data path, integrated Flash program memory, RAM, and a fixed set of peripherals. The PIC18 family is Microchip's enhanced mid-range line, sitting between the baseline PIC10/12/16 series and the 16-bit dsPIC/PIC24 families. PIC18 MCUs are widely deployed in industrial control, consumer electronics, automotive subsystems, and educational platforms because of their deterministic RISC architecture, low cost, and the mature MPLAB X toolchain. Key features of the PIC18F4520-I/P include 36 digital I/O pins, four timer modules (one 8-bit and three 16-bit), two capture/compare/PWM (CCP) modules plus one enhanced CCP (ECCP), an internal 31 kHz-8 MHz oscillator with 4x PLL, Fail-Safe Clock Monitor, and a separate Watchdog Timer with its own RC oscillator. The 40-pin PDIP package simplifies prototyping and breadboard-based designs. Operating voltage spans 4.2 V to 5.5 V, and the industrial temperature grade extends from -40C to +85C. Internally, the device uses a C-compiler-optimized RISC architecture with a hardware 8x8 single-cycle multiplier, a non-multiplexed 16-bit program bus, and a 16-bit instruction word. nanoWatt technology adds multiple idle/sleep modes, ultra-low-power wake-on-interrupt, and a real-time clock using Timer1, enabling battery-friendly designs where average current draw can drop into the microamp range. The Fail-Safe Clock Monitor provides automatic clock-source backup in safety-critical applications. Typical applications include industrial control panels, sensor interface nodes, motor-control front ends (with ECCP for PWM), USB-to-serial bridges (using a USART plus external converter), home appliance user interfaces, and low-cost data-acquisition front ends that benefit from the 10-bit ADC. Hobbyists and educators also rely on the PIC18F4520 as a teaching vehicle because of its breadboard-friendly DIP form factor and abundant example code. When designing with this device, ensure the oscillator configuration bits match the chosen clock source and that decoupling capacitors (100 nF plus a bulk 10 uF) are placed within 5 mm of the supply pins. For low-power designs, verify the ADC acquisition time and avoid leaving analog inputs floating; unused digital I/O should be configured as outputs low to minimize transient current. This page synthesizes distributor pricing as of 2026-09-27, drop-in PIC18 alternatives in the same 40-pin PDIP footprint, and practical design notes not found in the manufacturer datasheet, giving engineers a single decision-ready reference.

Cotización Contacto
PIC18F4520-I/P - 8-Bit MCU 40MHz 32KB Flash DIP-40 | Microchip
PIC18F4520-I/P

PIC18F4520-I/P - 8-Bit MCU 40MHz 32KB Flash DIP-40 | Microchip

The Microchip Technology PIC18F4520-I/P is an 8-bit PIC18 enhanced flash microcontroller delivering up to 40 MHz clock (10 MIPS at 3V-5V) with 32KB (16K x 16) flash program memory, 1,536 bytes of RAM, and 256 bytes of EEPROM, housed in a 40-pin plastic DIP (PDIP-40) package with 36 general-purpose I/O lines. A microcontroller unit (MCU) integrates a processor core, program memory, data memory, and peripherals on a single die, forming the lowest tier of the embedded control hierarchy: embedded controller -> microcontroller -> system-on-chip. The PIC18 family extends the classic PIC16 RISC architecture with a C-compiler-optimized instruction set and an 8x8 single-cycle hardware multiplier. Key features include nanoWatt Technology power management (Idle and Sleep modes with multiple wake sources), an internal oscillator block covering 31 kHz to 8 MHz with 4x PLL, a Fail-Safe Clock Monitor that safely shuts down the system if the primary clock fails, and a watchdog timer with its own independent RC oscillator. The peripheral set comprises a 10-bit, up to 13-channel analog-to-digital converter, two CCP modules plus one enhanced CCP (ECCP) supporting PWM, capture and compare, an enhanced USART for serial communication, a Parallel Slave Port, three 16-bit timers plus one 8-bit timer, and an In-Circuit Debug/Programming interface (ICSP) using the PGC/PGD pins. Typical applications include industrial control panels, motor control and relay driver boards, legacy equipment maintenance, hobbyist and educational prototyping, and laboratory instrumentation. The DIP-40 package is especially valuable for breadboarding, socketed field replacement, and through-hole production. A key design consideration: the -I suffix specifies the industrial temperature range of -40C to +85C and a supply range of 4.2V to 5.5V; design the power rail and brown-out settings accordingly. This page synthesizes distributor pricing, verified drop-in alternatives, complete pinout data, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto
PIC18F4520-I/P - 8-bit MCU 32KB Flash 40MHz DIP-40 | Microchip
PIC18F4520-I

PIC18F4520-I/P - 8-bit MCU 32KB Flash 40MHz DIP-40 | Microchip

The Microchip Technology PIC18F4520-I/P is an 8-bit enhanced Flash microcontroller delivering up to 10 MIPS performance at 40 MHz, with 32 KB (16K x 16) Flash program memory, 1,536 bytes of SRAM, 256 bytes of EEPROM, and 36 general-purpose I/O pins, housed in a 40-pin PDIP package rated from -40C to +85C. An 8-bit microcontroller (MCU) is a single integrated circuit that contains a processor core, program memory, data memory, and peripherals such as timers, serial interfaces, and analog-to-digital converters. Within the power-management hierarchy of embedded systems, the MCU sits at the application layer, coordinating sensors, actuators, and communication interfaces. The PIC18 family is Microchip's enhanced mid-range 8-bit architecture, a successor to the PIC16 line, optimized for C compiler efficiency. Key differentiating features include a C-compiler-optimized RISC core with an 8 x 8 single-cycle hardware multiplier, nanoWatt Technology power-management modes with an internal oscillator block covering 31 kHz to 8 MHz, Fail-Safe Clock Monitor, and an extended instruction set. A 10-bit analog-to-digital converter with up to 13 channels, two CCP (Capture/Compare/PWM) modules plus one ECCP module, an enhanced USART, and a parallel slave port round out the peripheral set. Architecturally, the PIC18F4520 uses a modified Harvard architecture with a 16-bit instruction word and 8-bit data path, executing most instructions in a single cycle (200 ns at 40 MHz crystal-derived Fosc/4). Operation spans a 4.2 V to 5.5 V supply, making it well suited to 5 V industrial logic environments where 3.3 V MCUs require level shifting. Typical applications include industrial control and automation, legacy equipment maintenance and upgrades, motor control via the ECCP module, and educational/hobby embedded platforms, where the through-hole DIP-40 package simplifies prototyping and socketed replacement. A key design consideration is supply voltage: the -I industrial temperature version requires 4.2 V to 5.5 V, so a 5 V regulated rail and 5 V-tolerant peripherals are assumed; the LF variant (PIC18LF4520) covers 2.0 V to 5.5 V for low-voltage designs. This page synthesizes distributor pricing, verified drop-in alternatives within the PIC18 DIP-40 family, pinout data, and practical design notes not found in the manufacturer datasheet, providing engineers a single decision-ready reference as of 2026-10-12.

Cotización Contacto
PIC18F4520-I/PT - 8-Bit MCU 32KB Flash 40MHz TQFP-44
PIC18F4520-I/PT

PIC18F4520-I/PT - 8-Bit MCU 32KB Flash 40MHz TQFP-44

The Microchip Technology PIC18F4520-I/PT is an 8-bit PIC microcontroller from the PIC18F family, delivering up to 40 MIPS throughput from a 40 MHz internal clock and integrating 32 KB of Enhanced Flash program memory with 1.5 KB of internal SRAM and 256 bytes of EEPROM, housed in a 44-pin TQFP (10x10) package. According to Microchip's product listing, the device is built on an enhanced RISC Harvard architecture with 75 instructions and a 16-bit wide instruction set, providing deterministic interrupt response and single-cycle hardware multiply support. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile Flash program memory, volatile SRAM, EEPROM, and a rich peripheral set (timers, A/D, USART, I2C, SPI, PWMs, and I/O ports) into one package. The PIC18F sits in the upper tier of Microchip's 8-bit portfolio, offering nanoWatt power management, 10-bit ADC, and Extended Instruction Set capability. It belongs to the broader category of embedded controllers in the power management and microcontroller pyramid, used whenever a deterministic, low-cost control plane is needed. Key differentiating features include 36 digital I/O pins, a 13-channel 10-bit A/D converter with 100 ksamples/s throughput, two analog comparators, two CCP modules and one ECCP module, hardware USART with LIN support, MSSP for SPI/I2C, and four timer modules (one 8-bit, three 16-bit). The Enhanced Flash supports 100K erase/write cycles typical and self-programmability under firmware control, enabling bootloaders and field updates without external programmers. The architecture uses a 16-bit program path and an 8-bit data path, with 31 interrupt vectors and a vectored priority scheme. The ADC can be triggered from a dedicated timer for deterministic sampling. With five operating modes (Run, Idle, Sleep, Doze, and RC_RUN) plus the nanoWatt regulator, the device typically draws 7 µA in Sleep and 1.6 mA at 4 MHz/3.3 V, allowing years of operation from a battery in sensor applications. Typical applications include industrial control panels, sensor hubs with analog front-end conditioning, automotive body and HVAC sub-systems, USB-to-UART bridges, motor control driver boards, and consumer white goods where deterministic performance, low BOM cost, and long-term firmware stability are required. The wide operating range (2.0 V to 5.5 V) makes the PIC18F4520 equally comfortable in 3.3 V battery-backed and 5 V mains-referenced designs. When designing with this part, observe the boundary-scan rules in the in-circuit debug header (ICD/ICSP) and provide adequate decoupling: place a 100 nF ceramic as close as possible to each VDD/VSS pair plus a 10 µF bulk on the main rail. The PLCC vs TQFP package choice affects socket availability and PCB rework; pick PT (TQFP-44) for surface-mount production and keep I/P (DIP-40) only for breadboard prototypes. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
PIC18F4520-I/PT - 8-Bit MCU 40MHz 32KB Flash TQFP-44 | Microchip
PIC18F4520-I/PT

PIC18F4520-I/PT - 8-Bit MCU 40MHz 32KB Flash TQFP-44 | Microchip

The Microchip Technology PIC18F4520-I/PT is an 8-bit PIC18 enhanced Flash microcontroller running at up to 40 MHz clock frequency, with 32 KB (16K x 16) of Flash program memory and 44-pin TQFP (10x10 mm) surface-mount package. An 8-bit microcontroller (MCU) is an integrated circuit that contains a processor core, program memory, data memory, and peripherals on a single chip, executing one instruction per cycle on 8-bit-wide data paths. Within the system hierarchy, the MCU sits at the heart of embedded control systems, ranking below application processors but above simple logic ICs in capability. The PIC18F4xxx family extends Microchip's mid-range PIC architecture with a 16-bit-wide instruction set, enhanced Flash endurance, and nanoWatt technology for low-power design. Key features of the PIC18F4520 include 10-bit analog-to-digital conversion across multiple channels, nanoWatt power management, capture/compare/PWM (CCP) modules, an enhanced CCP (ECCP) module, and a priority interrupt structure with three programmable external interrupts. Per the family datasheet, the device integrates one 8-bit timer, three 16-bit timers, and a watchdog timer, providing flexible timing resources without external components. Architecturally, the PIC18F4520 uses a Harvard architecture with separate program and data buses, an Enhanced Flash program memory with high write endurance, and linear addressing via the Phase-Locked Loop (PLL) that multiplies the oscillator input to reach the 40 MHz internal clock. The industrial-grade temperature rating (-40C to +85C, denoted by the -I suffix) suits harsh environments. Typical applications include industrial automation and control panels, automotive accessories (non-safety), instrumentation and data loggers, and consumer appliance control boards. The 10-bit ADC and CCP/PWM outputs make it well suited to sensor acquisition and motor or LED control. Design considerations: the 44-TQFP footprint requires careful decoupling of multiple VDD/VSS pairs, and the RB6/RB7 pins double as the In-Circuit Serial Programming (ICSP) clock and data lines - keep programming headers accessible. This page synthesizes distributor pricing, drop-in alternatives, pinout data, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto
PIC18F4523-E/ML - 8-bit MCU, 32KB Flash, 40MHz, 44-QFN | Microchip
PIC18F4523-E/ML

PIC18F4523-E/ML - 8-bit MCU, 32KB Flash, 40MHz, 44-QFN | Microchip

The Microchip Technology PIC18F4523-E/ML is an 8-bit PIC microcontroller from the PIC18Fxx23 enhanced Flash family, delivering up to 40 MHz operation from 2.0 V to 3.3 V or 4.2 V to 5.5 V supplies. The device integrates 32 KB of Flash program memory (16K x 16), 1536 bytes of RAM, 256 bytes of EEPROM, and 36 digital I/O pins in a 44-pin VQFN (8x8 mm) exposed-pad package, qualified to the extended -40C to +125C automotive temperature grade. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, I/O peripherals, and often analog blocks. The PIC18F family uses Microchip's enhanced 8-bit RISC architecture with a 16-bit instruction word and 8-bit data path, optimized for deterministic interrupt latency and C-compiler efficiency. Within the broader taxonomy, the PIC18F4523 sits at: 8-bit MCU -> enhanced PIC18 -> PIC18Fxx23 sub-family -> 40-pin class microcontrollers -> embedded computing -> semiconductor IC. Key differentiating features include an internal oscillator block, a 10-bit ADC with up to 13 channels, multiple PWM modules, an enhanced USART, an MSSP module for SPI and I2C, two comparators, and a 16-bit timer/counter. The /ML suffix denotes the QFN surface-mount package with extended (-40C to +125C) operating temperature, while the -E suffix indicates the extended automotive temperature grade. Architecturally, the PIC18F4523 leverages a Harvard bus structure with separate program and data paths, a hardware multiplier, and prioritized interrupts that allow deterministic response times in motor control and sensor fusion loops. The 40 MHz oscillator with 4x PLL option yields 10 MIPS throughput, sufficient for control loops, human-machine interface (HMI) refresh, and small protocol stacks such as Modbus RTU over RS-485. Typical applications include industrial automation controllers, automotive body and HVAC modules, sensor signal conditioning, USB-to-UART bridges (using the MSSP/USART), motor drive front-ends, and white-goods user-interface boards. The wide operating voltage range also supports 5V industrial 24V-bus designs after front-end regulation. When designing with the PIC18F4523-E/ML, plan the PCB land pattern to expose the QFN thermal pad and stitch vias to the inner ground plane for proper heat dissipation. The ICSP programming pins (PGC/PGD) must remain accessible in production layouts, and decoupling should be a 100 nF ceramic within 3 mm of each supply pin per Microchip's PIC18F family reference design. This page synthesizes distributor stock levels, drop-in PIC18F45xx alternatives from Microchip, and PCB layout considerations not always surfaced in the standalone datasheet.

Cotización Contacto
PIC18F4523-I/P - 32KB Flash 8-bit MCU, 40MHz, 40-PDIP | Microchip
PIC18F4523-I/P

PIC18F4523-I/P - 32KB Flash 8-bit MCU, 40MHz, 40-PDIP | Microchip

The Microchip Technology PIC18F4523-I/P is an 8-bit PIC18 enhanced flash microcontroller delivering up to 10 MIPS performance, 32KB of program flash memory (16K x 16 words), 1.5KB of RAM, and 256 bytes of EEPROM in a 40-pin PDIP through-hole package. It operates across a 2.0V to 5.5V supply range and integrates a 12-bit A/D converter with up to 13 input channels, making it suitable for mixed-signal embedded designs. An 8-bit microcontroller is a single-chip computer that integrates a CPU, RAM, non-volatile program memory (flash/ROM), I/O peripherals, and communication interfaces onto one die. The PIC18 family uses a C-compiler-optimized RISC architecture with 8x8 single-cycle hardware multiply and a 16-bit instruction word, occupying the tier above baseline PIC16 parts and below the PIC24/dsPIC families in Microchip's portfolio. This hierarchy places the PIC18F4523-I/P firmly within the mainstream 8-bit MCU segment, where deterministic core performance and broad peripheral integration are prioritized over raw clock speed. Key features include a 40MHz internal/external clock with 4x PLL support, internal oscillator from 31 kHz to 8 MHz, fail-safe clock monitor, watchdog timer with dedicated RC oscillator, nanoWatt power management for sleep current reduction, two USART modules, MSSP (SPI/I2C), CCP/ECCP modules, and two analog comparators. The 12-bit ADC distinguishes this part from the older 10-bit PIC18F4520. The device supports in-circuit serial programming (ICSP) and in-circuit debug (ICD) via two pins. Typical applications include industrial control panels, sensor signal conditioning nodes, motor control with low-side MOSFET driving, automotive body and chassis subsystems (non-safety), consumer appliance control boards, and battery-powered instrumentation requiring nanoWatt sleep modes. The 40-PDIP package is favored for legacy designs, educational platforms, and breadboard prototyping where through-hole assembly is preferred over SMD. When designing with this MCU, place the 0.1uF VDD decoupling capacitor within 5mm of each VDD/SS pin pair. Use a 10k pull-up on MCLR to ensure clean reset behavior and an in-series resistor to limit injection current. Unused I/O pins must be configured as outputs and driven low to minimize sleep mode leakage.

Cotización Contacto
PIC18F4523-I/PT - 8-bit PIC MCU 32KB Flash 40MHz 44-TQFP | Microchip
PIC18F4523-I/PT

PIC18F4523-I/PT - 8-bit PIC MCU 32KB Flash 40MHz 44-TQFP | Microchip

The Microchip Technology PIC18F4523-I/PT is a high-performance 8-bit PIC microcontroller in the PIC18F family, featuring 32KB of Enhanced Flash program memory, 1536 bytes of RAM, and 256 bytes of EEPROM. Housed in a 44-pin TQFP (10x10 mm) package, it executes instructions at up to 40 MHz (10 MIPS) through its RISC architecture, and integrates a 12-bit A/D converter with up to 13 input channels. Operating from 2.0 V to 5.5 V, this device supports both 3.3 V and 5 V system designs, making it ideal for mixed-voltage environments. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripherals onto one silicon die. PIC18F microcontrollers are Microchip's mid-range enhanced 8-bit family, sitting between the baseline PIC10/12/16 families and the 16-bit dsPIC/PIC24 families. They combine a RISC Harvard architecture with on-chip peripherals (ADC, timers, UART, SPI, I2C, PWM, etc.), enabling standalone embedded control without external logic. Compared with 32-bit ARM Cortex-M cores, PIC18F parts trade raw performance for predictable interrupt latency, deterministic instruction timing, and a mature MPLAB/XC8 toolchain. Key features of the PIC18F4523 include nanoWatt power management for low-power sleep modes, up to 36 digital I/O pins, two 8-bit and three 16-bit timers, two capture/compare/PWM modules, two enhanced USART modules, an MSSP (SPI/I2C) port, and self-programming flash with block erase. The integrated 12-bit ADC delivers 12-bit resolution across up to 13 analog channels, doubling the precision of competing 10-bit ADC implementations in this segment. Typical applications include industrial control boards, motor drive interface logic, HVAC and appliance controllers, automotive body/comfort electronics, sensor signal conditioning, USB-to-serial bridges, and small graphical or segment LCD products. The 32KB flash comfortably supports USB stacks (CDC, HID), Modbus RTU, and PID control loops. Designers should consult Microchip's datasheet DS39626 family document for full peripheral specifications, electrical characteristics, and programming guidelines.

Cotización Contacto
PIC18F4523T-I/ML - 8-bit 32KB Flash MCU, 40MHz, TQFP-44
PIC18F4523T-I/ML

PIC18F4523T-I/ML - 8-bit 32KB Flash MCU, 40MHz, TQFP-44

The Microchip Technology PIC18F4523T-I/ML is an 8-bit PIC18 enhanced flash microcontroller with 32KB of program memory, 1536 bytes of RAM, and 256 bytes of EEPROM, housed in a 44-pin TQFP (ML) package with exposed pad. What is a PIC18 microcontroller? PIC18 is Microchip's high-performance 8-bit microcontroller family built on an enhanced RISC architecture. PIC18 microcontrollers combine Harvard architecture (separate program and data buses) with C-optimized instruction sets, integrated peripherals (ADC, UART, SPI, I2C, PWM), and nanoWatt power management. They sit within the broader hierarchy: PIC18 -> 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. The PIC18F4523 specifically belongs to the PIC18F4520/4523 family of 28/40/44-pin enhanced flash MCUs with 12-bit A/D, designed for mixed-signal embedded designs. The PIC18F4523 executes instructions at up to 10 MIPS from a 40 MHz oscillator, supports 4.2V to 5.5V single-supply operation, and provides 36 digital I/O pins. Its on-chip peripherals include a 12-bit A/D converter with up to 13 channels, two capture/compare/PWM modules, two USART modules, MSSP (SPI/I2C), and the nanoWatt power-managed sleep modes (Idle, Sleep, Deep Sleep) that drop current consumption to the nanoampere range. The device uses a modified Harvard architecture with a 16-bit instruction word, an 8-level hardware stack, and a priority interrupt controller with vectored interrupts. The flash program memory supports self-programming (ICSP) and an internal 8 MHz RC oscillator is selectable for low-cost designs without external clocking. Typical applications include industrial control panels, HVAC thermostats, sensor signal conditioning, home appliance user interfaces, and low-cost data acquisition systems where 12-bit ADC precision, multiple serial interfaces, and reliable flash program memory are required. The wide 5V supply tolerance is well-matched to industrial 24V bus designs post-regulation. When designing with this part, ensure VDD decoupling is placed within 5 mm of the AVSS/VDD pins and use a 100 nF + 10 uF bulk capacitor combination. For 12-bit ADC accuracy, drive the analog inputs through low-impedance sources (< 2 kohm) and decouple VREF+ independently. The exposed thermal pad (ML package) must be soldered to the PCB ground plane for thermal dissipation. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on a single datasheet page. Engineers evaluating 8-bit MCU options will find the comparison tables, application notes, and package pinout information consolidated here for faster decision-making.

Cotización Contacto
PIC18F4525-E/PT - 8-Bit 48KB Flash MCU, 44-TQFP | Microchip
PIC18F4525-E/PT

PIC18F4525-E/PT - 8-Bit 48KB Flash MCU, 44-TQFP | Microchip

The Microchip Technology PIC18F4525-E/PT is an 8-bit PIC microcontroller from the PIC18F family, featuring 48KB of Enhanced Flash program memory, 3,384 bytes of RAM, and 1KB of EEPROM, housed in a 44-pin TQFP (10x10 mm) surface-mount package. The device executes instructions at up to 10 MIPS with a 25MHz (40MHz max) external clock input and includes an integrated 31 kHz to 8MHz internal oscillator block with 4x PLL support, enabling flexible system clocking without external crystals. An 8-bit microcontroller (MCU) is a single-chip computer optimized for control-oriented embedded tasks. The PIC18 family is part of Microchip's enhanced RISC architecture line, sitting between the PIC16 mid-range parts and the 16-bit dsPIC/PIC24 devices in Microchip's portfolio. Within that hierarchy, the PIC18F4525 belongs to the "F4525/F4620" sub-family that pairs Enhanced Flash with nanoWatt power management and a 10-bit ADC, making it a general-purpose MCU for industrial and consumer control. Key features of the PIC18F4525-E/PT include a 13-channel 10-bit ADC with auto-acquisition, two Capture/Compare/PWM modules, an enhanced USART, an MSSP module supporting SPI and I2C (master/slave), two analog comparators, and a hardware 8x8 single-cycle multiplier. The Fail-Safe Clock Monitor (FSCM) automatically switches to the internal RC oscillator if the primary clock fails, and the Watchdog Timer uses a dedicated internal RC for true independence. nanoWatt technology provides idle, sleep, and deep-sleep modes for battery-friendly designs. The architecture is an 8-bit Harvard RISC design with a C-compiler-optimized instruction set, 16-bit instructions, and 32-level hardware stack with software push/pop. The Enhanced Flash supports >100,000 erase/write cycles typical and >40 years of data retention, suitable for long-life industrial equipment. Typical applications include industrial automation controllers, HVAC and environmental sensors, low-cost motor control with PWM, sensor-interface nodes, and home appliance control panels. Designers typically select this part when you require a mature PIC18 codebase, generous Flash for a small RTOS or USB stack, and the pin count of the 44-pin TQFP. When designing with the PIC18F4525-E/PT, configure CONFIG words in the IDE (MPLAB X) to select oscillator mode and brown-out thresholds. The E/PT suffix indicates the extended (-40C to +125C) operating temperature grade in the TQFP package. This page combines distributor pricing, drop-in same-family alternatives, and practical design notes compiled from the manufacturer datasheet and authorized distributors.

Cotización Contacto
PIC18F4525-I/ML - 48KB Flash 8-bit MCU, 44-QFN | Microchip
PIC18F4525-I/ML

PIC18F4525-I/ML - 48KB Flash 8-bit MCU, 44-QFN | Microchip

The Microchip Technology PIC18F4525-I/ML is an 8-bit RISC PIC18 microcontroller delivering 48KB of Enhanced Flash program memory, 3968 bytes of SRAM, and 1024 bytes of Data EEPROM in a 44-pin QFN (ML) package. It operates at up to 40 MHz with a 200 ns instruction cycle, integrates 36 digital I/O lines, and supports supply voltages from 4.2 V to 5.5 V for full-speed operation. The device is built on CMOS technology and includes 10-bit Analog-to-Digital Conversion (ADC), nanoWatt power management, and a rich set of peripherals including CCP, EUSART, MSSP (SPI/I2C), and dual analog comparators. A PIC18 microcontroller is a Harvard-architecture 8-bit RISC processor from Microchip's PIC family, positioned between baseline PIC10/12/16 devices and the 16-bit dsPIC/PIC24 families. The PIC18F4525 belongs to the F45xx sub-family of 28/40/44-pin enhanced flash microcontrollers with nanoWatt technology, and the PIC18F4525-I/ML variant specifically uses the 44-pin QFN package (also denoted by the ML suffix). It sits in the broader taxonomy as: microcontroller -> 8-bit MCU -> PIC18 -> PIC18F45xx -> flash-based RISC MCU -> embedded computing IC. Key features include 48KB (24K × 16) of Enhanced Flash program memory, 1024 bytes of Data EEPROM with high-endurance, 3968 bytes of SRAM, 36 I/O pins with individual direction control, and four timer modules (Timer0/1/2/3). Integrated peripherals include a 10-bit ADC with up to 13 channels, two analog comparators, a Capture/Compare/PWM (CCP) module plus an Enhanced CCP (ECCP), MSSP supporting SPI and I2C (master/slave), enhanced USART (EUSART), and a 4× PLL on selected oscillator modes. nanoWatt features such as idle, sleep, and deep-sleep modes reduce active current substantially for battery-powered designs. Architecturally, the PIC18F4525-I/ML uses a 16-bit-wide instruction word with a 21-bit program counter, supporting linear memory addressing up to 2 MB. The enhanced flash supports self-programming via ICSP (In-Circuit Serial Programming) and a bootloader-friendly write/erase model. On-chip debug is supported through Microchip's ICD/MPLAB ecosystem, and the 44-QFN (8×8 mm) package with exposed pad aids thermal dissipation for industrial applications. Typical applications include industrial control panels, sensor data acquisition nodes, motor drive controllers (low-side, using ECCP+PWM), USB-to-UART bridges (using EUSART + external transceiver), home appliance HMIs, and automotive body/comfort modules. The 36 I/O count comfortably supports keypad scanning, LCD driving (via external controller), and multi-channel ADC monitoring in parallel. When designing with this part, ensure the AVdd/AVss pair is properly decoupled (10 µF + 0.1 µF) for ADC accuracy, and route the exposed thermal pad (EP) to a solid ground pour. Choose between the 44-QFN (ML), 44-TQFP (PT), and 40-PDIP (P) variants only after PCB real estate and thermal budget are finalized. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
PIC18F4525-I/PT - 8-bit MCU, 48KB Flash, 40MHz, 44-TQFP | Microchip
PIC18F4525-I/PT

PIC18F4525-I/PT - 8-bit MCU, 48KB Flash, 40MHz, 44-TQFP | Microchip

The Microchip Technology PIC18F4525-I/PT is an 8-bit PIC18F family microcontroller with 48 KB of Flash program memory, 3,968 bytes of RAM, and a 256-byte EEPROM, operating at up to 40 MHz (10 MIPS) in a 44-pin TQFP (10x10 mm) package. The device integrates 36 digital I/O pins, a 10-bit ADC with up to 13 input channels, two analog comparators, two CCP modules, one enhanced CCP (ECCP), a USART, MSSP (SPI/I2C), and nanoWatt power management technology. The -I suffix indicates the industrial temperature range of -40C to +85C, and the /PT suffix denotes the TQFP-44 surface-mount package. A microcontroller (MCU) is a single-chip computer containing a CPU core, program and data memory, and programmable peripheral interfaces. The PIC18F family uses a RISC-based 8-bit Harvard architecture with 16-bit instructions optimized for deterministic real-time control. MCUs sit at the lowest tier of the embedded computing hierarchy - above them are microprocessors (MPUs) and SoCs - making the PIC18F4525 suited to mid-complexity applications where deterministic interrupt latency and low power matter more than raw throughput. Key features include four 8-bit timer/counters, two 16-bit timer/counters, a 10-bit ADC with up to 13 channels and 100 Ksps conversion rate, dual hardware USART and MSSP peripherals, and nanoWatt Technology power-saving modes. The device supports ICSP (In-Circuit Serial Programming) and ICD (In-Circuit Debugging) through the ICSP/ICD pins, enabling field updates without removing the MCU from the board. Typical applications include industrial control systems, HVAC controls, automotive body electronics, sensor interfaces, low-end displays, and consumer appliance controls. The wide supply range (4.2V to 5.5V) and broad peripheral set make it suitable for mains-powered and battery-backed designs. Designers should reserve pin 1 (MCLR/VPP) with the proper reset circuit and ensure decoupling capacitors are placed within 5 mm of VDD/VSS pairs. For low-power designs, utilize nanoWatt sleep modes with appropriate peripheral gating to achieve quiescent currents below 1 uA. This page synthesizes distributor pricing, drop-in PIC18F alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
PIC18F4525T-I/ML - 48KB Flash, 40MHz 8-bit MCU TQFP-44 | Microchip
PIC18F4525T-I/ML

PIC18F4525T-I/ML - 48KB Flash, 40MHz 8-bit MCU TQFP-44 | Microchip

The Microchip Technology PIC18F4525T-I/ML is an 8-bit RISC PIC microcontroller in a 44-pin QFN/TQFP (ML) package, featuring 48 KB of Enhanced Flash program memory and 3,968 bytes of RAM. The part operates from 4.2 V to 5.5 V, supports a maximum clock speed of 40 MHz, and provides 36 digital I/O pins suitable for embedded control designs. Program memory is rated for high-endurance in-application programming, while an integrated 10-bit Analog-to-Digital Converter handles sensor and analog signal acquisition. A PIC18 microcontroller is a 16-bit instruction-word, 8-bit data-path MCU built around an enhanced Harvard architecture, combining separate program and data buses with a RISC instruction set. PIC18 devices sit in the hierarchy: PIC18 family -> PIC microcontrollers -> 8-bit microcontrollers -> microcontrollers (MCUs) -> semiconductors. Within Microchip's lineup, the PIC18F family is the mainstream "high performance" tier, positioned above PIC16F and below the 16-bit dsPIC and 32-bit PIC32 families. nanoWatt Technology (a Microchip trademark) refers to dynamic power-management modes that lower active and sleep current for battery-aware designs. Key features of the PIC18F4525 include 256 bytes of EEPROM, two 8-bit and three 16-bit timers, two analog comparators, a USART, an MSSP (Master Synchronous Serial Port) configurable for SPI or I2C, two capture/compare/PWM modules, and nanoWatt power management. The 10-bit ADC provides up to 13 input channels depending on package, supporting industrial sensor interfacing at modest conversion rates. Typical applications include industrial automation controllers, motor control front-ends (using PWM and timers), automotive body and chassis subsystems (non-safety), consumer appliances, HVAC control boards, USB-to-UART bridging (with on-chip USART), and sensor hubs requiring analog and digital I/O. The wide 4.2 V to 5.5 V supply range and 40 MHz throughput position it well for 5 V-tolerant industrial designs. The industrial temperature grade of -40 C to +85 C (I-suffix) supports uncontrolled environments, and the TQFP-44 footprint with exposed pad simplifies PCB layout for thermal dissipation and ground integrity. The "T" suffix denotes tape-and-reel packaging for high-volume assembly. When designing, engineers should match Vdd decoupling (100 nF + 10 uF recommended) and reserve MCLR pin handling for in-circuit serial programming and reset robustness.

Cotización Contacto
PIC18F4525T-I/PT - 8-bit 40MHz 48KB Flash MCU | Microchip
PIC18F4525T-I/PT

PIC18F4525T-I/PT - 8-bit 40MHz 48KB Flash MCU | Microchip

The Microchip Technology PIC18F4525T-I/PT is an 8-bit RISC PIC18 microcontroller running at up to 40 MHz, integrating 48 KB of Enhanced Flash program memory, 3,968 bytes of SRAM, and 1,024 bytes of data EEPROM in a 44-pin TQFP (10x10 mm) package. Tape-and-reel (T) packaging variant, industrial -40C to +85C temperature range (I suffix), and PT package designator. What is a PIC18F Microcontroller? A PIC18F microcontroller belongs to Microchip's 8-bit PIC microcontroller family built on an enhanced Harvard architecture with a RISC instruction set. Within the broader semiconductor hierarchy, PIC18F sits inside: microcontroller -> embedded MCU -> 8-bit MCU -> semiconductor IC. The PIC18F core separates program and data buses, integrates peripherals (ADC, timers, communication ports) on-chip, and executes most instructions in one instruction cycle (four oscillator clocks), making it suitable for deterministic real-time control. The PIC18F4525T-I/PT differentiates itself through on-chip nanoWatt power management, an enhanced instruction set with 16-bit instructions, C-compiler friendly architecture, and 36 digital I/O pins. Its 10-bit ADC (up to 13 channels), multiple timers, and Capture/Compare/PWM modules suit mixed-signal embedded designs. Internal oscillator options and on-chip EEPROM simplify BOM, while the ICSP (In-Circuit Serial Programming) interface enables in-field firmware updates. Technically, the device operates from 4.2V to 5.5V (F-class part; the LF variant supports 2.0V-5.5V), uses a 2.0V-5.5V wide-range core (per family datasheet), and integrates nanoWatt Technology with multiple low-power modes (RUN, IDLE, SLEEP). Peripheral highlights include two USART modules, MSSP (SPI/I2C), CCP/ECCP modules, and a 10-bit ADC with up to 13 input channels. The enhanced Flash supports 100,000 erase/write cycles typical, with self-programmability. Typical applications include industrial control panels, HVAC thermostat controllers, automotive body electronics (non-safety), consumer appliance controllers, sensor signal conditioning nodes, and USB-to-UART bridging with companion parts. The wide peripheral set also suits smart metering, motor control (low-side BLDC), and small graphical user-interface boards with character or low-resolution graphic LCDs. When designing with PIC18F4525T-I/PT, choose between TQFP-44 (PT), QFN-44 (ML), and DIP-40 (P) packages based on PCB real-estate and assembly preferences. Pay attention to the F vs LF voltage-range suffix: F = 4.2V-5.5V only, LF = 2.0V-5.5V (full range). A proper decoupling network (100 nF + 10 uF bulk per VDD pair) and a 1 kohm pull-up on MCLR are essential for stable operation. This page synthesizes distributor pricing, drop-in alternatives within the same TQFP-44 footprint, and practical design notes not found in the manufacturer datasheet. Compared to DigiKey/Mouser/Octopart product pages, it adds a pin-compatible same-family alternative list, an ADC-channel and peripheral comparison table, and AI-search-optimized FAQs covering commercial, comparison, selection, replacement, and datasheet intents.

Cotización Contacto
PIC18F452T-I/L - 8-Bit 40MHz 32KB Flash MCU 44-PLCC | Microchip
PIC18F452T-I/L

PIC18F452T-I/L - 8-Bit 40MHz 32KB Flash MCU 44-PLCC | Microchip

The Microchip Technology PIC18F452T-I/L is a high-performance 8-bit CMOS FLASH-based microcontroller from the PIC18F family, delivering 10 MIPS (100 ns instruction execution) at 40 MHz and packing 32 KB of program FLASH plus 1.5 KB of RAM into a 44-pin PLCC package. Operating from 4.2 V to 5.5 V across the industrial -40 °C to +85 °C temperature range, it integrates 34 digital I/O lines, a 10-bit ADC with up to 8 channels, two 8-bit and three 16-bit timers, hardware USART, MSSP (SPI/I2C), and the nanoWatt Technology power-management block that drops quiescent current to microamp levels during sleep. The 'T' suffix indicates tape-and-reel packaging and 'I/L' designates the industrial temperature grade in the L (PLCC) package. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path, on-chip FLASH program memory, RAM, peripherals, and an arithmetic-logic unit. Within the broader semiconductor taxonomy, the PIC18F452 belongs to the hierarchy: microcontroller -> 8-bit MCU -> FLASH MCU -> PIC18 family -> PIC18F452 sub-family. The 8-bit class remains widely used because it offers deterministic interrupt response, low cost, and low power for embedded control where the throughput of 32-bit Cortex-M parts is unnecessary. Key features that distinguish this device include 77 single-word instructions (simplifying compiler and assembly code), an enhanced FLASH program memory supporting 100K erase/write cycles, an ICD-friendly in-circuit debug interface, hardware multiplier for 8x8 unsigned operations in a single cycle, and self-programming capability that allows field firmware upgrades through the USART. The MSSP peripheral supports both SPI master/slave and I2C master/slave modes, while the USART handles RS-232/RS-485 links commonly found in industrial automation. Typical applications include industrial control and sensor interfaces, building automation controllers, HVAC thermostats, instrument data loggers, low-end human-machine interface (HMI) panels, and consumer appliance control boards. Its 10-bit ADC, generous I/O count, and rugged industrial temperature grade make it well-suited to factory-floor designs where reliability over decades matters more than peak compute throughput. The PIC18F452 is also widely used as a teaching platform in university embedded systems curricula and as an upgrade target for legacy PIC16C/PIC17C designs, offering code compatibility with older Microchip parts. When designing with this part, ensure decoupling capacitors of 100 nF are placed close to VDD/VSS pins and that MCLR is pulled high through a 10 kohm resistor for normal operation; for in-circuit debugging, leave the ICSPDAT and ICSPCK pins accessible. Programming voltage is generated on-chip, eliminating the need for an external 13 V supply. Brown-out reset thresholds should be configured via configuration bits to protect FLASH integrity during power cycling.

Cotización Contacto
PIC18F452T-I/PT - 8-bit 40MHz 32KB Flash MCU 44-TQFP | Microchip
PIC18F452T-I/PT

PIC18F452T-I/PT - 8-bit 40MHz 32KB Flash MCU 44-TQFP | Microchip

The Microchip Technology PIC18F452T-I/PT is a high-performance 8-bit CMOS Flash microcontroller based on the PIC18 enhanced architecture, delivering 10 MIPS at 40 MHz, packaged in a 44-pin TQFP (10x10 mm). It integrates 32 KB of program Flash, 1536 bytes of SRAM, and 256 bytes of EEPROM, with 34 digital I/O lines, eight 10-bit ADC channels, two CCP modules, USART, MSSP (SPI/I2C), and a 10-bit PWM module. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash for program, SRAM for data, EEPROM for non-volatile storage), peripherals, and I/O on one die. Within the semiconductor hierarchy, MCUs sit below ASICs and microprocessors; the 8-bit class (PIC18, AVR, 8051) targets cost-sensitive embedded control, while 32-bit Cortex-M parts dominate higher-performance tasks. PIC18F devices add 16-bit-wide instructions, linear memory, and C-compiler-friendly addressing to the traditional PIC RISC core. Key features of the PIC18F452T-I/PT include 32 KB self-programmable Flash, 256-byte EEPROM with one-million-cycle endurance, an internal RC oscillator with PLL for 40 MHz operation, nanoWatt power management, and a wide 4.2 V to 5.5 V supply range. The 77 single-word instruction set simplifies code generation and assembly migration. The device uses a Harvard architecture with separate code and data buses, plus an 8x8 hardware multiplier that accelerates arithmetic. The integrated 10-bit ADC provides up to eight channels with 500 ksps throughput. The nanoWatt technology reduces quiescent current below 1 uA in sleep mode, enabling battery-backed designs. Typical applications include industrial control systems, automotive body electronics, home appliances, sensor interfaces, low-end human-machine interfaces, and USB/serial-connected embedded nodes. The generous Flash and SRAM support small RTOS, TCP/IP stacks, and graphical LCD controllers. Designers should place 0.1 uF decoupling capacitors close to each VDD/VSS pair and a 10 uF bulk capacitor near the device. Unused I/O pins should be configured as outputs low to minimize current draw. The internal oscillator eliminates the external crystal in many designs but trades frequency accuracy for BOM cost. This page synthesizes distributor pricing, drop-in alternatives drawn from Microchip's own PIC18F family, and practical design notes not found in the manufacturer datasheet. All alternatives are pin-compatible 44-TQFP variants sourced from the same PIC18F452 die family.

Cotización Contacto