Microcontroladores

Productos (18748)

PIC24FJ128DA110-I/BG - 16-Bit 32MHz MCU 128KB Flash USB Graphics | Microchip
PIC24FJ128DA110-I/BG

PIC24FJ128DA110-I/BG - 16-Bit 32MHz MCU 128KB Flash USB Graphics | Microchip

The Microchip Technology PIC24FJ128DA110-I/BG is a 16-bit PIC24F microcontroller with 128KB Flash, 24KB RAM, integrated graphics controller, USB On-The-Go (OTG), and a 32MHz CPU core, packaged in a 121-ball TFBGA (10x10 mm). It targets low-power graphical user interface designs that previously required a separate graphics controller IC. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and peripherals such as timers, communication interfaces, and analog blocks. The PIC24F family uses a 16-bit modified Harvard architecture with a wide 24-bit instruction word optimized for C compiler efficiency. Microcontrollers sit in the embedded computing hierarchy above 8-bit MCUs but below 32-bit MCUs, balancing code density, peripheral integration, and power consumption for cost-sensitive embedded products. The PIC24FJ128DA110-I/BG integrates a graphics controller that can drive displays up to 4.3" WQVGA (480x272), supporting resistive touch sensing via the integrated A/D converter. It also includes USB OTG with on-chip transceiver, eliminating the need for an external PHY. The 32MHz core delivers up to 16 MIPS, while the nanoWatt XLP power-down modes allow deep sleep currents below 1 uA, making it suitable for battery-powered graphical products. This device is part of the PIC24FJ-DA family, which adds graphics acceleration hardware (line draw, rectangle fill, text rendering) directly in silicon. The combination of 128KB self-programmable Flash, 24KB SRAM, and 52 digital I/O pins provides ample headroom for graphical UI stacks while leaving room for application logic. Real-time peripherals include 5 timer/counters, Input Capture, Output Compare, I2C, SPI, UART, and a 10-bit 1.1 Msps A/D converter with up to 32 input channels. Typical applications include wearable fitness displays, portable medical monitors, industrial HMI panels, smart thermostats, USB-connected graphical instruments, and low-cost graphical toys. The integrated USB OTG also enables the part to act as both USB device and limited host, useful for accessories that need to read USB flash drives or HID peripherals. The TFBGA-121 package supports compact board layouts, though it requires 4-layer PCB with microvia technology for reliable assembly. When designing with this part, allocate the 4-layer PCB budget for TFBGA fanout, and place the 32 kHz secondary oscillator crystal close to the SOSCO/SOSCI pins to avoid start-up drift. The graphics controller is RAM-framebuffer based, so allocate sufficient external SRAM when driving larger panels.

Cotización Contacto
PIC24FJ128DA110-I/PT - 16-bit MCU, 128KB Flash, USB OTG, Graphics | Microchip
PIC24FJ128DA110-I/PT

PIC24FJ128DA110-I/PT - 16-bit MCU, 128KB Flash, USB OTG, Graphics | Microchip

The Microchip PIC24FJ128DA110-I/PT is a 16-bit Flash microcontroller from the PIC24F family with integrated graphics acceleration, a display controller capable of directly driving displays up to 4.3-inch WQVGA (480x272), 128KB of program Flash, 24KB of SRAM, and USB On-The-Go support. It runs at 32 MHz delivering up to 16 MIPS and is housed in a 100-pin TQFP (PT) package rated for the -40C to +85C industrial temperature range. An LDO (Low-Dropout) linear regulator is a type of voltage regulator that maintains a stable output voltage even when the input voltage is very close to the output voltage; conversely, the PIC24FJ128DA110-I/PT sits within the broader taxonomy of MCU (microcontroller unit) -> embedded microcontroller -> 16-bit RISC MCU -> PIC24F family -> semiconductor. Understanding this hierarchy clarifies where this device competes: against other 16-bit low-power MCUs and against higher-end Cortex-M0+ parts for cost-sensitive graphical HMI designs. Key features include a dedicated graphics controller with hardware-accelerated rendering for line, rectangle, and text drawing, USB On-The-Go (host + device role) with integrated PHY, a 10-bit ADC at 500 ksps, multiple UART/SPI/I2C peripherals, a Parallel Master Port (PMP) for external graphics memory or bus interfaces, and Microchip's eXtreme Low Power (XLP) technology with multiple sleep modes down to nanoWatt levels. The integrated Charge Time Measurement Unit (CTMU) supports capacitive touch sensing without external ICs. Architecturally, the device pairs a 16-bit modified Harvard RISC core with a 24-bit instruction word and 16-bit data path, plus a dedicated graphics DMA engine that offloads pixel rendering from the CPU. The 32 MHz oscillator with PLL yields 16 MIPS throughput, more than sufficient for mid-resolution WQVGA UI animation. Internal voltage regulation supports 2.0V to 3.6V single-supply operation. Typical applications include graphical user-interface panels, USB-connected human-interface devices, low-cost HMI touch screens with display up to 4.3-inch WQVGA, embedded data loggers with USB mass storage, and portable medical or industrial instruments requiring a monochrome or color TFT panel. The integrated graphics controller and CTMU allow a two-IC BOM (MCU + display) for many designs. When designing with this part, evaluate whether your display resolution stays at or below 480x272; larger WVGA panels require the PIC24FJ256DA110 family or higher. Plan PCB layout for the USB OTG D+/D- 90-ohm differential pair and provide adequate decoupling (100 nF + bulk) on every VDD/VSS pin pair to keep the PLL clean. This page synthesizes distributor pricing, pin-compatible alternatives in the 100-TQFP package, and practical design notes that complement the manufacturer datasheet with drop-in selection guidance.

Cotización Contacto
PIC24FJ128DA110T-I/BG - 16-bit 32MHz MCU, 128KB Flash, 121-TFBGA | Microchip
PIC24FJ128DA110T-I/BG

PIC24FJ128DA110T-I/BG - 16-bit 32MHz MCU, 128KB Flash, 121-TFBGA | Microchip

The Microchip PIC24FJ128DA110T-I/BG is a 16-bit microcontroller from the PIC24F family, operating at up to 32 MHz and featuring 128 KB (43K x 24) of Flash program memory, 24 KB of RAM, and an integrated graphics controller with USB On-The-Go (OTG). It is housed in a 121-ball TFBGA (10x10 mm) package and provides 52 digital I/O pins for general-purpose use. The device combines low-power operation with an internal oscillator and is designed for cost-sensitive graphical interface applications. Background Knowledge: A 16-bit microcontroller (MCU) is a programmable embedded processor that balances the throughput of 32-bit cores with the code density and low power consumption typical of 8-bit parts. The PIC24F family sits between Microchip's PIC16/PIC18 (8-bit) and dsPIC/PIC32 (16/32-bit) portfolios, offering DSP-class instructions, hardware multiply/divide, and linear memory addressing. In a typical system hierarchy, an MCU belongs to the embedded-computing class of semiconductors, sub-classified as microcontroller -> flash MCU -> 16-bit MCU -> low-power MCU -> graphics-enabled MCU. The integrated graphics controller and USB OTG put the PIC24FJ128DA110 into a niche for color LCD/graphics products. Key features include 128 KB self-programmable Flash, 24 KB SRAM, hardware RTCC, 16-bit timers, a 10/12-bit ADC, and a graphics controller capable of directly driving displays up to 4.3-inch WQVGA (480x272) resolution. The peripheral set also includes UART, SPI, I2C, and a USB 2.0 OTG controller with integrated PHY. Technical depth: The PIC24FJ128DA110 uses a Harvard architecture with separate program and data paths, a 16-bit data bus, and a 24-bit instruction word. The modified RISC core executes most instructions in one cycle, with hardware multiply and divide. The integrated graphics accelerator offloads draw operations from the CPU, allowing real-time GUI updates at low MHz. Typical applications include embedded graphical user interfaces with color TFT/LCD panels, USB-enabled consumer products, low-cost HMI controllers, portable medical devices, and industrial control panels. It is suited for designs that need USB connectivity plus a display. When designing with this part, plan PCB escape routing carefully for the 121-ball BGA; an external 12 MHz crystal is recommended when USB Full-Speed accuracy is required. A 4-layer PCB with stitched ground and a separate analog ground island improves ADC performance.

Cotización Contacto
PIC24FJ128DA110T-I/PT - 16-Bit MCU, 128KB Flash, USB, Graphics | Microchip
PIC24FJ128DA110T-I/PT

PIC24FJ128DA110T-I/PT - 16-Bit MCU, 128KB Flash, USB, Graphics | Microchip

The Microchip Technology PIC24FJ128DA110T-I/PT is a 16-bit PIC® 24F microcontroller featuring 128 KB of Flash program memory (43K x 24), 24 KB of RAM, an integrated graphics controller and display interface, and full-speed USB OTG connectivity, housed in a 100-pin TQFP (12x12 mm) package. It runs at 32 MHz (8 MIPS with instruction pipelining) from a 2.2 V to 3.6 V supply and offers 84 general-purpose I/O pins supporting I2C, SPI, UART/USART, IrDA and USB. The integrated Charge Time Measurement Unit (CTMU) and parallel master port suit capacitive touch and external memory expansion. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and peripheral interfaces into one package. The PIC24F family sits between 8-bit PIC16/PIC18 devices and 32-bit PIC32 devices, offering 16-bit RISC performance, low-power sleep modes, and rich peripheral integration for cost-sensitive embedded designs. Within the PIC24F family, the 'DA' subgroup adds an on-chip graphics display controller targeting low-cost WQVGA TFT panels up to 4.3 inches and 480x272 resolution. Key features include 16 MIPS performance, hardware PMP (Parallel Master Port) for graphics bus connection, integrated USB 2.0 full-speed OTG with on-chip transceiver, 4-wire resistive touch-screen controller, CTMU for capacitive touch, hardware crypto engine (AES/DES), Real-Time Clock and Calendar (RTCC) with calendar mode, and 16-channel 10-bit ADC. The 100-TQFP package exposes 84 I/O lines with flexible peripheral remapping, enabling direct bus connection to TFT panels without an external bridge ASIC. The PIC24FJ128DA110 architecture is built around a modified Harvard RISC core with a 16-bit wide datapath, 24-bit instructions, and a 3-stage pipeline that delivers 8 MIPS at 32 MHz. The graphics controller includes a dedicated DMA-driven LCD interface supporting TFT panels up to WQVGA. Hardware AES-128 and DES blocks offload encryption tasks from the CPU, useful for secure USB applications and consumer devices needing basic content protection. Typical applications include WQVGA TFT graphical user interfaces, USB-enabled medical devices, industrial HMI panels, point-of-sale terminals, USB peripherals (HID, CDC, MSD, Audio class), smart appliance control boards, and embedded graphical instruments. The integrated USB OTG with on-chip transceiver eliminates the need for an external PHY. When designing with this device, allocate PCB area carefully because the 100-TQFP at 12x12 mm has 0.5 mm pitch and is a fine-pitch part - use 4 mil trace and space, reflow profile per J-STD-020, and follow Microchip's PCB layout guidelines for USB 2.0 high-speed analog pins. Decouple VDD/VUSB with 100 nF + 4.7 uF within 3 mm of the pins. This page synthesizes distributor stock and pricing, drop-in alternatives, and design considerations not consolidated in any single manufacturer document.

Cotización Contacto
PIC24FJ128DA206-I/MR - 16-Bit 32MHz MCU w/ 128KB Flash & USB-OTG | Microchip
PIC24FJ128DA206-I/MR

PIC24FJ128DA206-I/MR - 16-Bit 32MHz MCU w/ 128KB Flash & USB-OTG | Microchip

The Microchip Technology PIC24FJ128DA206-I/MR is a 16-bit PIC24F microcontroller running at up to 32 MHz, integrating 128 KB of Flash program memory (43K x 24), 96 KB of SRAM, a hardware graphics controller, a USB On-The-Go (OTG) controller, a 16-bit Parallel Master Port (PMP), and a 10-bit A/D converter in a 64-pin VQFN (9x9 mm) package with exposed thermal pad. It operates from 2.0 V to 3.6 V and is designed for embedded HMI applications that benefit from an integrated display pipeline without an external graphics controller. A PIC microcontroller is a microcontroller unit - a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile working memory (SRAM), and a rich peripheral set into one package. The PIC24FJ family uses a 16-bit modified Harvard RISC architecture that delivers roughly 16 MIPS at 32 MHz, occupying a tier between 8-bit AVR/PIC16 parts and 32-bit Cortex-M devices. Within Microchip's portfolio, PIC24F sits in the low-power 16-bit segment, alongside dsPIC33 for digital signal control and PIC32MX/ME for 32-bit applications. PIC24FJ128DA206 sits inside the PIC24FJ 'DA' sub-family, distinguished by its integrated graphics controller and USB-OTG. Key features include 128 KB self-programmable Flash with EEPROM emulation, 96 KB SRAM, hardware graphics acceleration supporting displays up to 4.3" WQVGA (480x272), a USB 2.0 full-speed OTG transceiver, up to 52 dedicated digital I/O, a 10-bit ADC with up to 16 channels and 500 ksps, two UARTs, two SPI, two I2C, a Real-Time-Clock and Calendar (RTCC), and five 16-bit timers. An integrated CTMU and DMA engine offload touch sensing and data movement from the core. Typical applications include human-machine interface panels in home appliances, industrial terminals with color TFT LCDs, USB-equipped point-of-sale terminals, medical measurement devices with graphical readouts, automotive infotainment auxiliary displays, and consumer electronics that need both USB device/host connectivity and a graphical UI. The components in this design benefit from the integrated graphics controller and PMP, which directly drive TFT panels. Designers should note that the 64-pin VQFN package requires careful PCB layout - the exposed thermal pad must be soldered to a sufficiently large copper pour (typically >=1 square inch) for thermal dissipation and electrical ground reference. Decouple VDD/VUSB with 100 nF ceramic capacitors placed within 3 mm of each supply pin.

Cotización Contacto
PIC24FJ128DA206-I/PT - 16-bit MCU, 128KB Flash, USB OTG, Graphics | Microchip
PIC24FJ128DA206-I/PT

PIC24FJ128DA206-I/PT - 16-bit MCU, 128KB Flash, USB OTG, Graphics | Microchip

The Microchip Technology PIC24FJ128DA206-I/PT is a 16-bit PIC24F-family Flash microcontroller with an integrated graphics controller, USB On-The-Go (OTG), 128 KB (43K x 24) of program Flash, and 96 KB of RAM, packaged in a 64-pin TQFP (10 x 10 mm) with industrial -40C to +85C temperature rating. It executes instructions at 32 MHz (16 MIPS) from an internal oscillator, providing 52 general-purpose I/O pins and a wide 2.2 V to 3.6 V operating range suited to USB and graphics subsystems. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), and peripherals such as ADC, timers, communication controllers, and I/O. The PIC24F is Microchip's 16-bit modified-Harvard MCU family, positioned between 8-bit PIC16/PIC18 and 32-bit PIC32MX parts; it scales up by adding larger memories, USB, and richer peripherals while retaining PIC assembly compatibility. The 'DA' sub-family adds an LCD/graphics display controller capable of driving displays up to 4.3" WQVGA at 480 x 272 resolution, and the 'F' core carries eXtreme Low Power (XLP) technology for battery-friendly designs. Key features of the PIC24FJ128DA206 include an integrated full-speed USB 2.0 OTG controller with on-chip transceiver, a 3-bit graphical display controller with hardware acceleration, up to 96 KB SRAM for frame buffering, an 8-channel 10-bit ADC, multiple UART/SPI/I2C peripherals, and CTMU for capacitive touch sensing. The 64-pin TQFP package exposes all major peripherals while keeping the footprint compact for embedded HMI boards. Architecturally, the PIC24F core uses a 16-bit modified-Harvard bus with separate program and data paths, a 24-bit instruction word, and 16 working registers. The internal 8 MHz Fast RC oscillator (with PLL up to 32 MHz) eliminates external crystals in many designs. The graphics pipeline offloads pixel rendering from the CPU, and the USB OTG stack supports both host and device roles for product-flexibility. Typical applications include low-cost color graphical HMI panels (appliance control, thermostats, medical instrument UIs), USB peripherals and embedded hosts (mass storage, HID, CDC), battery-powered portable instrumentation with touch sensing, industrial control panels requiring graphical diagnostics, and consumer products needing a USB charging or data interface. The graphics + USB combination is the strongest value proposition versus generic PIC24F parts. When designing with this part, plan the PCB for a 4-layer stack-up so the TQFP-64 decoupling loop is short and the USB DP/DM traces are 90-character, length-matched, and impedance-controlled near 90 ohms differential. The internal oscillator is usually sufficient, but add a footprint for an optional crystal if the application needs tight USB clock accuracy. This page synthesizes distributor pricing, pin-compatible drop-in alternatives, and practical design notes that are not aggregated on the manufacturer datasheet, giving engineers a one-stop reference for the PIC24FJ128DA206-I/PT.

Cotización Contacto
PIC24FJ128DA206T-I/PT - 128KB Flash 16-Bit MCU w/ USB OTG | Microchip
PIC24FJ128DA206T-I/PT

PIC24FJ128DA206T-I/PT - 128KB Flash 16-Bit MCU w/ USB OTG | Microchip

The Microchip Technology PIC24FJ128DA206T-I/PT is a 16-bit PIC24F microcontroller featuring 128KB (43K x 24) of Flash program memory, 96KB of RAM, and an integrated USB On-The-Go (OTG) controller plus a graphics LCD controller. It operates at up to 32 MHz MIPS performance from a 2.5V/3.3V supply and is housed in a 64-pin TQFP (10x10 mm) package. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and programmable peripherals. Within the embedded hierarchy, the PIC24FJ belongs to the 16-bit MCU class, which sits between 8-bit MCUs (PIC16/PIC18) and 32-bit MCUs (PIC32). The "PIC24F" prefix designates the family, while "J" indicates the high-performance, low-power Flash variant using Microchip's nanoWatt technology. The "DA" series specifically integrates display and USB-OTG peripherals, targeting human-machine interface (HMI) and USB-embedded designs. Key features include an integrated Full-Speed USB 2.0 OTG controller with on-chip transceiver, a graphics controller supporting TFT/STN/CSTN panels up to 640x480 (VGA), a 16-channel 10-bit ADC with 500 ksps conversion rate, up to 52 dedicated digital I/O pins, and hardware crypto engines for secure data transfer. The device also supports PMP (Parallel Master Port), I2S, SPI, I2C, UART, and CAN peripherals, providing extensive connectivity. Architecturally, the PIC24FJ uses a modified Harvard architecture with separate buses for instruction and data, a 16-bit wide datapath, and a 24-bit instruction word. This delivers deterministic execution with single-cycle 16x16 MAC operations. The nanoWatt XLP technology reduces sleep current to the nanoampere range, making the device suitable for battery-powered applications. Typical applications include USB barcode scanners, USB medical instrumentation, USB sensor hubs, USB-to-UART bridges, low-cost HMI panels with TFT displays, industrial control panels, and embedded graphics terminals. The integrated USB OTG reduces BOM cost and PCB area compared to designs using an external USB controller. When designing with this device, ensure proper decoupling (100 nF ceramic plus 10 uF bulk) close to each VDD/VSS pair, follow Microchip's USB hardware design guidelines for the 90-ohm differential D+/D- trace impedance, and use the free MPLAB X IDE with the XC16 compiler for firmware development. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical USB/graphics design notes not consolidated in the manufacturer datasheet.

Cotización Contacto
PIC24FJ128DA210-I/PT - 16-Bit MCU, 128KB Flash, Graphics, USB OTG | Microchip
PIC24FJ128DA210-I/PT

PIC24FJ128DA210-I/PT - 16-Bit MCU, 128KB Flash, Graphics, USB OTG | Microchip

The Microchip Technology PIC24FJ128DA210-I/PT is a 16-bit PIC24F microcontroller with integrated graphics acceleration, a display controller capable of driving displays up to 4.3" WQVGA (480x272), 128KB of Flash program memory, and USB On-The-Go (OTG) support. It runs at up to 32MHz (16 MIPS) on a modified Harvard RISC architecture and is housed in a 100-pin TQFP (12x12 mm) package. The part operates from 2.0V to 3.6V, suitable for battery-powered and 3.3V-rail embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile data memory (RAM), and a rich set of peripherals (timers, ADC, communication controllers, I/O). The PIC24F family is Microchip's 16-bit extension of the 8-bit PIC architecture, sharing the same development environment (MPLAB X IDE, XC16 compiler) but adding DSP instructions, larger address space, and higher throughput. Within Microchip's portfolio, the PIC24FJ128DA210 belongs to the graphics-enabled "DA" sub-family, sitting between general-purpose PIC24FJ128GA and high-performance PIC24EP series. Key features include 128KB (43K x 24 instruction words) Flash, 24KB RAM, an on-chip 96KB frame buffer for graphics, 3.3V operation, and a peripheral set that includes USB OTG, parallel master port, I2C, SPI, UART, 16-bit timers, and a 10-bit ADC. The integrated graphics controller supports TFT panels with up to 4.3" WQVGA resolution, eliminating the need for an external display controller in many HMI designs. The PIC24FJ128DA210-I/PT integrates the core and graphics acceleration into a single die, reducing BOM cost and PCB area in graphical product designs. Compared to using a discrete MCU plus external LCD controller, the integrated approach reduces component count and simplifies firmware development by providing hardware-accelerated drawing primitives. Typical applications include low-cost graphical HMI panels, home appliance user interfaces, medical device displays, industrial control screens, point-of-sale terminals, and USB-connected embedded devices. The part is well suited to any application needing rich on-screen graphics without the cost of a higher-end ARM-based MCU. When designing with this part, allocate PCB area for the 100-pin TQFP package (12x12 mm) and provide proper decoupling near the analog and digital supply pins. The USB OTG interface requires 0.1uF decoupling on VUSB3V3 and a 27-ohm series resistor on D+/D- lines per USB specification. This page synthesizes distributor pricing, drop-in PIC24F alternatives, and practical design considerations that are not collected in a single location in the manufacturer datasheet.

Cotización Contacto
PIC24FJ128DA210T-I/PT - 16-bit 32MHz 128KB Flash USB Graphics MCU
PIC24FJ128DA210T-I/PT

PIC24FJ128DA210T-I/PT - 16-bit 32MHz 128KB Flash USB Graphics MCU

The Microchip Technology PIC24FJ128DA210T-I/PT is a 16-bit PIC microcontroller from the PIC24F-DA family, integrating a 32MHz PIC core, 128KB (43K x 24) of Flash program memory, 96KB of RAM, and a hardware graphics controller with USB On-The-Go (OTG) in a 100-pin TQFP (12x12mm) package. A PIC microcontroller (MCU) is a compact programmable processor that integrates CPU, memory, and I/O peripherals on a single silicon die. Within the broader semiconductor taxonomy, the PIC24FJ128DA210 belongs to the PIC24F family (16-bit modified Harvard architecture) which sits above 8-bit PIC MCUs and below 32-bit MIPS-based PIC32 MCUs in Microchip's portfolio. The 'FJ' series is built on a low-power Flash process, and the 'DA' sub-family adds an integrated display controller and graphics acceleration IP. This device targets human-machine interface (HMI) applications, replacing discrete graphics controllers and LCD driver chips with a single integrated solution. Key features include 32MHz operation (8 MIPS), 128KB Flash (43K x 24), 96KB RAM, an integrated graphics controller that directly drives displays up to 4.3-inch WQVGA at 480x272 resolution, and a USB OTG controller for direct device-to-device connectivity. The 100-pin TQFP package exposes up to 85 I/O pins with multiple communication peripherals (UART, SPI, I2C) and a 16-channel 10-bit ADC. The 'I' suffix indicates industrial temperature grade (-40C to +85C), and 'T' indicates Tape & Reel packaging. From an architectural standpoint, the PIC24FJ uses a 16-bit modified Harvard architecture with separate program and data paths, supporting DSP-like instructions and hardware multiply/divide. The integrated graphics controller is a hardware-accelerated 2D engine that offloads pixel rendering from the CPU, enabling smooth GUI animations at full panel refresh rates. Combined with the USB OTG controller, the device can simultaneously drive a display while managing USB device, host, or on-the-go communication. Typical applications include graphical user interfaces for industrial control panels, medical instrumentation displays, consumer appliance HMI panels, and embedded systems that need both a TFT display interface and USB connectivity. The wide I/O count makes the 100-pin TQFP suitable for systems with multiple peripheral interfaces. When designing with this device, pay attention to the voltage domain (2.2V to 3.6V core) and provide adequate decoupling across VDD/VSS pairs. The integrated graphics controller significantly reduces firmware complexity but requires correct PLL and timing configuration per the datasheet. For pin-compatible scaling, Microchip offers smaller-memory and different-package variants in the same DA family. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto
PIC24FJ128GA006-I/MR - 16-bit 128KB Flash MCU 64-VQFN | Microchip
PIC24FJ128GA006-I/MR

PIC24FJ128GA006-I/MR - 16-bit 128KB Flash MCU 64-VQFN | Microchip

The Microchip Technology PIC24FJ128GA006-I/MR is a 16-bit PIC24F microcontroller delivering 16 MIPS at 16 MHz, with 128 KB of Flash program memory, 8 KB of RAM, and a peripheral set that includes a 16-bit Parallel Master Port, 5x 16-bit timers, an RTCC, and a 10-bit 1.1 Msps A/D converter in a 64-pin 9x9 mm VQFN package. It belongs to the PIC24FJ128GA006 family of 64/80/100-pin general-purpose Flash microcontrollers. What is a 16-bit Flash microcontroller? A 16-bit Flash microcontroller is an embedded computing device that integrates a CPU core, non-volatile program memory (Flash), working memory (RAM), and a rich peripheral set onto a single chip, with the program width sized at 16 bits to provide a balance between 8-bit simplicity and 32-bit computational headroom. In the hierarchy of embedded MCUs, this part sits at: PIC24F MCU -> 16-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. Key features include 128 KB Flash (43K x 24 words), 8 KB RAM, 53 digital I/O pins, an mTouch capacitive touch peripheral, a Parallel Master Port (PMP) for external bus expansion, USB 2.0 full-speed On-The-Go (OTG) with integrated transceiver, a 16-bit CRC, a Real-Time Clock and Calendar (RTCC), and the Microchip Core Independent Peripherals (CIPs) ecosystem for low-power operation. The internal oscillator is factory-calibrated to within +/- 2% accuracy. Technical depth: the PIC24F core uses a modified Harvard architecture with a 16-bit data path and a 24-bit instruction word, allowing single-cycle multiplication. The Flash is rated for at least 1000 erase/write cycles typical. The on-chip 1.8V core regulator is powered from a 2.0-3.6V supply, providing a robust noise environment for analog peripherals, including the 10-bit ADC capable of 500 ksps (1.1 Msps for two channels). Typical applications include industrial control panels, low-power human-machine interfaces with LCD or segmented display, USB peripherals and OTG device firmware upgrades, secure access control with capacitive touch keypads, portable medical measurement, and general-purpose embedded designs using PMP to drive external parallel N-TPU/FIFO memories. When designing with this part, ensure that the VQFN-9x9 exposed pad is soldered to a sufficient copper pour for thermal dissipation and that VDDCORE is bypassed with a 10 uF ceramic capacitor. The device is also offered in 64-pin TQFP and 80/100-pin packages (e.g., PIC24FJ128GA006-I/PT, PIC24FJ128GA010-I/PF) with the same peripheral map for design reuse. This page synthesizes distributor pricing, drop-in 64-VQFN alternatives, and practical design notes that extend beyond the manufacturer datasheet DS39747C for engineers evaluating PIC24F MCU selection.

Cotización Contacto
PIC24FJ128GA006-I/PT - 16-Bit 16MHz 128KB Flash MCU | Microchip
PIC24FJ128GA006-I/PT

PIC24FJ128GA006-I/PT - 16-Bit 16MHz 128KB Flash MCU | Microchip

The Microchip Technology PIC24FJ128GA006-I/PT is a 16-bit general-purpose Flash microcontroller in the PIC24F family, featuring 128 KB (43K x 24) of program Flash, 8 KB of RAM, and a 16 MIPS modified Harvard architecture operating up to 32 MHz (16 MHz instruction frequency from an 8 MHz internal oscillator with 4x PLL). The device is housed in a 64-pin TQFP (10x10 mm) package with the industrial -40C to +85C operating range, and integrates advanced peripherals including multiple UART/SPI/I2C interfaces, a 16-channel 10-bit ADC, five 16-bit timers, and CTMU support. A 16-bit microcontroller (MCU) is an embedded processor that fetches 16-bit instructions and operates on data in 16-bit-wide registers, giving it roughly 2-4x the computational throughput of an 8-bit MCU at the same clock rate. Within the embedded hierarchy, the PIC24FJ128GA006 sits in the PIC24F sub-family, which targets low-power general-purpose applications such as consumer, industrial, and human-interface designs. The 'FJ' suffix indicates Flash program memory with nanoWatt Technology for ultra-low-power sleep modes, and the 'GA' family specifically emphasizes a rich analog and communication peripheral mix. Key features of the PIC24FJ128GA006 include a 17-bit by 17-bit single-cycle hardware multiplier, a 16-bit working register array, C-compiler-optimized architecture, an 8 MHz internal oscillator with PLL, multiple divide options, an integrated Real-Time Clock Calendar (RTCC) with on-chip 32 kHz oscillator support, a 5-bit DAC, CTMU (Charge Time Measurement Unit) for capacitive touch, and nanoWatt power-saving modes. The 64-pin TQFP package exposes extensive I/O including up to 53 general-purpose I/O pins, peripheral pin select, and JTAG boundary scan for in-circuit debug. Technically, the PIC24FJ128GA006 uses a modified Harvard architecture with separate program Flash and data RAM spaces, a 16-bit-wide instruction word, and a hardware multiply/divide unit that delivers deterministic DSP-friendly arithmetic. The on-chip peripherals are mapped via Peripheral Pin Select (PPS), giving the designer flexibility in pin assignment during PCB layout. Combined with nanoWatt Technology, this MCU balances computational performance with low standby power for battery-aware designs. Typical applications include industrial control and HMI panels, USB device/host/OTG bridging (paired with an external PHY or PIC24 USB variant), graphical user interfaces with external LCD controllers, sensor acquisition nodes, medical instrumentation entry points, and consumer appliances. The 10-bit ADC and CTMU also enable capacitive touch keypads for human-interface products. When designing with this part, ensure the MPLAB X IDE is configured for the PIC24FJ toolchain (XC16 compiler) and that the device is supplied within 2.0V to 3.6V. Decouple VDD/VSS pairs with 100 nF ceramics placed close to the pins, and reserve the MCLR pin for a proper reset network. For USB or CAN designs, prefer a sibling PIC24FJ with the dedicated peripheral to avoid external bridging cost. This page synthesizes distributor pricing, drop-in 64-pin TQFP alternatives, and practical design notes not found in the manufacturer datasheet, supporting faster BOM decisions for embedded engineers.

Cotización Contacto
PIC24FJ128GA006T-I/PT - 16-Bit 16MHz 128KB Flash MCU | Microchip
PIC24FJ128GA006T-I/PT

PIC24FJ128GA006T-I/PT - 16-Bit 16MHz 128KB Flash MCU | Microchip

The Microchip Technology PIC24FJ128GA006T-I/PT is a 16-bit Flash microcontroller from the PIC24F family, featuring a 16 MIPS CPU core running at 16 MHz, 128 KB of Flash program memory, and an integrated 64-pin TQFP (10x10 mm) package with 0.5 mm terminal pitch. This general-purpose MCU provides 8 KB of RAM, a rich peripheral set, and a wide operating voltage range, making it suitable for industrial automation, consumer electronics, and embedded control systems. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), volatile memory (RAM), and a configurable peripheral set into one device. The PIC24F is Microchip's 16-bit MCU family, sitting architecturally between the 8-bit PIC18 and the 32-bit PIC32 product lines, and is commonly used when applications outgrow 8-bit resources but do not yet require 32-bit performance. The PIC24FJ128GA006T-I/PT is part of the PIC24FJ128GA006 general-purpose sub-family, optimized for low-power and mixed-signal embedded designs. Key features of the PIC24FJ128GA006T-I/PT include 128 KB of self-programmable Flash (43K x 24 words), 8 KB of RAM, an integrated hardware multiplier, and peripherals such as multiple UART, SPI, and I2C modules, a Parallel Master Port (PMP), a 16-channel 10-bit ADC, and a Real-Time Clock/Calendar (RTCC). The on-chip 16 MIPS core and instruction cache improve effective throughput, while the nanoWatt power-down modes support battery-backed designs. The device operates from 2.0 V to 3.6 V, supports an industrial -40C to +85C temperature range, and is offered in a 64-pin TQFP package. The "T" suffix in the part number denotes Tape and Reel packaging, and the "I" suffix indicates the industrial temperature grade, allowing the part to be deployed in harsh environments including industrial control, building automation, and automotive accessory modules. Typical applications include human-machine interface (HMI) panels, industrial sensor hubs, motor control boards, USB/serial bridge devices, and portable data loggers. Designers value the PIC24F family for its deterministic interrupt latency, integrated ADC, and broad support from MPLAB X IDE and Microchip's software libraries. When developing with this MCU, allocate sufficient decoupling capacitance near each VDD/VSS pair, follow the latest Microchip errata document (DS80233-family) for revision-specific anomalies, and verify the JTAG/PGMAT pin assignments against the actual board layout. Designers migrating from PIC18 should review the 16-bit instruction set reference, as the assembly model differs from the 8-bit parts. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes for the PIC24FJ128GA006T-I/PT not found in the standalone manufacturer datasheet, helping engineers select a compatible variant quickly.

Cotización Contacto
PIC24FJ128GA010-I/PF - 16-bit 128KB Flash MCU, 100-TQFP | Microchip
PIC24FJ128GA010-I/PF

PIC24FJ128GA010-I/PF - 16-bit 128KB Flash MCU, 100-TQFP | Microchip

The Microchip Technology PIC24FJ128GA010-I/PF is a 16-bit microcontroller from the PIC24F family, integrating 128 KB of Flash program memory, 8 KB of RAM, and a rich set of peripherals into a 100-pin TQFP package (14x14 mm). It is built on a modified Harvard architecture and runs up to 16 MIPS at 32 MHz from a 2.5V/3.3V supply. What is a PIC24F microcontroller? The PIC24F is Microchip's ultra-low-power 16-bit MCU family, sitting in the hierarchy: 8-bit PIC MCU -> 16-bit PIC24 MCU -> 32-bit PIC32 MCU -> Microcontroller -> Embedded Processor. The 'F' suffix indicates Flash program memory and nanoWatt eXtreme Low Power technology, making these parts suitable for both battery-powered and line-powered embedded designs. Key features of the PIC24FJ128GA010-I/PF include an integrated 8 MHz internal oscillator with a 4x PLL option (yielding 32 MHz core / 16 MIPS), a 17-bit single-cycle hardware multiplier, a 16-bit hardware divider, and a 16-bit working register array. The device exposes a 10-bit ADC, multiple UART/SPI/I2C peripherals, and Parallel Port Pin Select (PPS) remapping for flexible I/O assignment. Code protection, an integrated ICSP debug port, and a generous peripheral set make it appropriate for both prototyping and production. Typical applications include industrial control panels, automotive body controllers, low-power consumer devices, USB/Human Interface Devices (HID), graphical displays, and sensor hubs. With 100 pins exposed, designers have abundant I/O for driving large character or graphical LCDs, multi-channel motor drivers, and multiple communication buses concurrently. When designing with this part, ensure the 100-pin TQFP land pattern is correctly fabricated and that the ICSP/ICD pins are brought out for in-circuit debugging. The internal 8 MHz oscillator with PLL is usually accurate enough for asynchronous serial, but precision timing applications should still use an external crystal.

Cotización Contacto
PIC24FJ128GA010-I/PT - 16-bit MCU, 128KB Flash, 100-TQFP | Microchip
PIC24FJ128GA010-I/PT

PIC24FJ128GA010-I/PT - 16-bit MCU, 128KB Flash, 100-TQFP | Microchip

The Microchip Technology PIC24FJ128GA010-I/PT is a 16-bit microcontroller from the PIC24F family built on a modified Harvard architecture, delivering 128 KB of Flash program memory, 8 KB of SRAM, and 16 MIPS performance at 32 MHz CPU clock. It is housed in a 100-pin TQFP (PT) package measuring 12x12 mm and is part of the nanoWatt XLP eXtreme Low Power platform aimed at general-purpose embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and a rich set of peripherals such as timers, communication interfaces, and analog blocks. PIC24F devices sit in the 16-bit segment of Microchip's portfolio, between the 8-bit PIC16/PIC18 families and the 32-bit PIC32 line, offering higher code density and richer peripherals while retaining the PIC ecosystem's MPLAB X toolchain. The PIC24FJ128GA010 specifically targets cost-sensitive applications that need substantial Flash and advanced peripherals like USB, CAN, and graphics-friendly PMP/EPSON-like LCD controllers. Key features include a 16-bit datapath with 17-bit x 17-bit hardware multiplier, 16-bit hardware divider, 16 working registers, two UARTs, two SPI ports, two I2C buses, 8 MHz internal oscillator with 4x PLL option, 10-bit ADC up to 500 ksps, five 16-bit timers, and a Parallel Master Port. nanoWatt XLP technology provides deep sleep currents in the sub-microamp range, suitable for battery-powered products. Code security is enforced via basic code-guard flash protection. Typical applications include industrial control panels, HVAC thermostats, low-end graphical displays, USB peripherals, CAN-connected sensor nodes, home appliances, and educational/development platforms such as the Explorer 16/32 board. The 100-pin TQFP exposes enough I/O (84 pins) to drive significant parallel loads including character LCDs and keypads. When designing with this MCU, ensure decoupling of VDD/VSS pairs with 100 nF ceramic capacitors as close to the pins as possible, configure the PLL and oscillator block per the family datasheet for stable startup, and respect the 3.0V-3.6V operating range for full-speed operation. For migration paths, the PIC24FJ128GA110 adds more peripherals in the same pinout while the PIC24FJ128DA210 adds integrated graphics RAM. This page synthesizes distributor pricing, parametric drop-in alternatives drawn from the PIC24F family, and PCB/thermal design notes not all collected on a single manufacturer page, giving engineers a one-stop reference for sourcing and designing around the PIC24FJ128GA010-I/PT.

Cotización Contacto
PIC24FJ128GA106 - 16-Bit 32MHz 128KB Flash MCU | Microchip
PIC24FJ128GA106

PIC24FJ128GA106 - 16-Bit 32MHz 128KB Flash MCU | Microchip

The Microchip Technology PIC24FJ128GA106 is a 16-bit RISC general-purpose flash microcontroller built on the PIC24F core and offered in a 64-pin TQFP package (10x10 mm body). It runs at up to 32 MHz, integrates 128 KB of program Flash (43K x 24 words), 16 KB of SRAM for data buffering, and features a peripheral set aimed at low-power connected designs with 3x I2C, 3x SPI, 4x UART, and 23 independent timers. The device operates from a 2.0V to 3.6V supply and supports advanced peripherals including a 10-bit ADC (16-channel, up to 500 ksps) and a Real-Time Clock/Calendar with calendar mode persistence. What is a PIC24F microcontroller? Microchip's PIC24F family is a 16-bit MIPS-modified Harvard architecture core positioned between 8-bit PIC16/PIC18 parts and 32-bit PIC32 parts. It targets low-power general-purpose embedded applications that need more performance than 8-bit cores yet benefit from low standby current (<100 nA), rich connectivity, and large SRAM buffers. Within the PIC taxonomy (8-bit PIC16/PIC18 -> 16-bit PIC24F/dsPIC33 -> 32-bit PIC32 -> SAM Cortex-M), the PIC24FJ128GA106 sits in the 16-bit connectivity-rich segment designed for human-interface devices, sensor hubs, and industrial control. Key features of the PIC24FJ128GA106 include 128 KB Flash / 16 KB RAM, a 32 MHz / 16 MIPS core, six 16-bit timers plus seven 32-bit timers, and a 16-channel 10-bit ADC with 500 ksps throughput. Its peripheral pin select (PPS) flexible remapping, four UART modules, and USB-full-speed device/embedded host/OTG support (on GA106 variants) make it a strong fit for communication-heavy industrial designs. The architecture uses 16-bit modified Harvard dual-bus fetch, a 31-level hardware stack, single-cycle 16x16 multiply, and supports both Interrupt-on-Change and selectable peripheral priorities. The 2.0V-3.6V wide VDD and integrated power-management features contribute to the <100 nA sleep current claim that distinguishes this family in low-drain applications. Typical applications include industrial sensor hubs, USB human-interface (HID) peripherals, advanced e-metering and smart thermostats, medical instrumentation, automotive body and infotainment subsystems, and general-purpose embedded controller boards. The combination of low power, 128 KB Flash, and 16 KB RAM supports stack-overhead for USB stacks plus protocol buffering. When designing with this MCU, ensure the regulator pin (ENVREG) is connected according to the datasheet (always connected is acceptable; some pins must be connected even when unused). Choose the /PT (TQFP-64) for hand/prototype builds and /MR (QFN-64) for space-constrained production; both packages share the same pinout per the PIC24FJ128GA family data sheet. This page synthesizes distributor pricing, drop-in alternatives within the same PIC24FJ family, and practical design notes not duplicated in the manufacturer datasheet.

Cotización Contacto
PIC24FJ128GA106-E/MR - 16-bit 32MHz 128KB Flash MCU | Microchip
PIC24FJ128GA106-E/MR

PIC24FJ128GA106-E/MR - 16-bit 32MHz 128KB Flash MCU | Microchip

The Microchip Technology PIC24FJ128GA106-E/MR is a 16-bit PIC24F microcontroller with 128 KB Flash, 16 KB RAM, and a 32 MHz core (16 MIPS), housed in a 64-pin VQFN (9x9 mm) package. The Extended temperature grade suffix (-E) supports -40C to +125C operation for industrial and harsh-environment designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and a rich set of peripherals such as timers, communication interfaces, and analog blocks. Within the broader taxonomy, the PIC24FJ family sits between 8-bit PIC16/PIC18 MCUs and the 32-bit PIC32 families, offering a strong balance of MIPS-per-mW for low-power mixed-signal applications. The "FJ" suffix denotes Flash program memory with nanoWatt XLP low-power technology. Key features include three I2C, three SPI, four UART channels, 23 independent timers, and 53 general-purpose I/O pins. Peripheral highlights comprise a 10/12-bit ADC, multiple PWM outputs, RTCC, and the nanoWatt XLP sleep modes that drop standby current below 100 nA. The 16-bit Modified Harvard architecture runs at up to 16 MIPS, while 128 KB Flash (43K x 24) and 16 KB RAM allow ample code and data buffering for connectivity stacks. The device uses a 3.3V nominal supply with an operating range of 2.0V to 3.6V, drawing less than 1 mA/MIPS active and offering deep-sleep currents below 100 nA with RTC retention. CTMU and mTouch capacitive-touch support, plus a Parallel Master Port for external memory or graphics, expand application reach. Integrated DMA and a configurable clock tree simplify real-time control and audio/sensor processing. Typical applications include low-power connected sensors, industrial control HMI, USB/audio bridges, point-of-sale terminals, secure access panels, and automotive body controllers. The wide temperature range and rich connectivity make it a workhorse for portable instrumentation and home-automation gateways. When designing with the PIC24FJ128GA106-E/MR, allocate adequate PCB copper under the exposed pad to meet the 9x9 mm thermal envelope, place decoupling capacitors within 3 mm of each power pin, and configure the PPS (Peripheral Pin Select) to avoid I/O contention. Code development is supported by MPLAB X IDE and MPLAB XC16 compiler. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
PIC24FJ128GA106-I/MR - 128KB Flash 16-bit MCU | Microchip
PIC24FJ128GA106-I/MR

PIC24FJ128GA106-I/MR - 128KB Flash 16-bit MCU | Microchip

The Microchip Technology PIC24FJ128GA106-I/MR is a 16-bit general-purpose flash MCU from the PIC24F family featuring 128 KB of program Flash and 16 KB of RAM in a 64-pin VQFN (9x9 mm) package. It operates up to 32 MIPS at 3.3 V and integrates rich connectivity peripherals including three I2C, three SPI, and four UART modules plus 23 independent timers. The device belongs to Microchip's nanoWatt XLP eXtreme Low Power technology class, achieving less than 100 nA standby current for battery-backed applications. Industrial-grade -40C to +85C operation and a 2.0 V to 3.6 V supply range suit portable, medical, and industrial embedded designs. What is a 16-bit Flash Microcontroller? A 16-bit flash microcontroller is an embedded processing device that combines a CPU with 16-bit data path width, on-chip non-volatile Flash program memory, and integrated peripherals such as timers, communication controllers, and analog blocks. PIC24F devices sit in Microchip's product hierarchy as general-purpose MCU -> 16-bit MCU -> flash MCU -> embedded microcontroller -> semiconductor, bridging 8-bit PIC16/PIC18 devices and 32-bit PIC32 parts. They are favored when 8-bit MCUs exhaust performance and 32-bit MCUs are over-spec for cost-sensitive designs. Key features include 128 KB (43K x 24) self-programmable Flash, 16 KB SRAM, hardware Real-Time Clock and Calendar (RTCC), 10-bit ADC with up to 16 channels, multiple PWM/SCCP modules, JTAG and ICSP debugging, and a Peripheral Pin Select (PPS) mapper for flexible signal routing. The nanoWatt XLP technology provides multiple power-saving modes including deep sleep with RTCC retention and low-power peripheral operation. The integrated CTMU peripheral simplifies touch and capacitive sensing implementations. The PIC24FJ128GA106 uses a Harvard RISC architecture with a 16-bit instruction set and 24-bit instruction width, enabling single-cycle instruction fetch with deterministic interrupt latency. The 32 MHz internal oscillator and on-chip PLL provide flexible clocking while the PPS system allows remapping of digital peripherals to most I/O pins, simplifying PCB layout. The wide 2.0 V to 3.6 V operating range and integrated voltage regulator reduce external component count for compact battery-powered designs. Typical applications include low-power IoT edge nodes, industrial sensor hubs, HMI/touch control panels, portable medical monitors, USB device controllers (with companion PIC24 USB parts), and automotive body electronics. The combination of RTCC, large SRAM buffer, and rich connectivity suits multi-protocol gateway designs and human-machine interface products. When designing with this MCU, place a 0.1 uF decoupling capacitor adjacent to each VDD/VSS pair, configure the PPS registers before enabling peripherals, and verify JTAG/ICSP pin usage during layout to avoid conflicts with target peripherals. Always set configuration bits in code to lock I/O, oscillator mode, and watchdog behavior at startup. This page synthesizes distributor pricing, drop-in package alternatives, application-specific design notes, and comparison tables not found in the manufacturer datasheet alone.

Cotización Contacto
PIC24FJ128GA106-I/PT - 16-bit 128KB Flash MCU, 64-TQFP | Microchip
PIC24FJ128GA106-I/PT

PIC24FJ128GA106-I/PT - 16-bit 128KB Flash MCU, 64-TQFP | Microchip

The Microchip Technology PIC24FJ128GA106-I/PT is a 16-bit general-purpose Flash microcontroller operating at up to 32 MHz with 128 KB of program Flash (43K x 24 words), housed in a 64-pin TQFP (10x10 mm) package. It features 16 KB of RAM, integrated peripheral pin select (PPS) for flexible I/O assignment, and a CTMU (Charge Time Measurement Unit) supporting up to 64 touch-sense buttons. According to the manufacturer datasheet, the device offers <100 nA standby current for low-power designs and includes 3x I2C, 3x SPI, and 4x UART serial ports, plus 23 independent timers for general-purpose and connectivity applications. A 16-bit microcontroller is an embedded processor whose data path and arithmetic logic unit operate on 16 bits per instruction, doubling throughput over 8-bit cores (e.g., PIC16) while remaining code-efficient for DSP-style operations. Within the broader taxonomy, this places the PIC24FJ as a mid-tier MCU -> 16-bit MCU -> general-purpose Flash MCU -> embedded microcontroller -> semiconductor. The PIC24F 'J' family from Microchip targets ultra-low-power operation, making the PIC24FJ128GA106 well suited for battery-powered or energy-harvesting applications where the MCU must idle for extended periods while keeping peripheral state. Key differentiating features include Peripheral Pin Select (PPS), which lets designers remap digital peripherals onto a wide choice of I/O pads after PCB layout is complete; this is a notable advantage over MCUs with fixed peripheral-pin mapping. The CTMU hardware block enables capacitive touch sensing without external ICs, while the rich analog complement (10/12-bit ADC, comparators, 5-bit DAC) supports sensor-fusion designs. Multiple serial channels (3x I2C, 3x SPI, 4x UART) allow the device to bridge disparate buses simultaneously. Typical applications include low-power IoT sensor nodes, human-machine interface panels with capacitive touch, industrial data loggers with USB or UART links, and consumer devices requiring multiple serial peripherals. Designers select this part when they need generous memory (128KB Flash, 16KB RAM), rich peripherals, and extreme low-power idle behavior in a mainstream TQFP package. When designing, watch for the 2.0-3.6V VDD range - this part is NOT 5V tolerant. Ensure PPS mappings are committed to non-volatile configuration for production builds. Use the CTMU calibration procedure from the datasheet before relying on touch-button performance. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto
PIC24FJ128GA108-E/PT - 16-bit 32MHz 128KB Flash MCU | Microchip
PIC24FJ128GA108-E/PT

PIC24FJ128GA108-E/PT - 16-bit 32MHz 128KB Flash MCU | Microchip

The Microchip PIC24FJ128GA108-E/PT is a 16-bit PIC24F general-purpose flash microcontroller with 128KB program flash, 16KB RAM, and 32 MIPS performance at 32 MHz, packaged in an 80-pin TQFP (12x12 mm, PT suffix). It features eXtreme low-power technology with sub-100nA standby current and is designed for low-power and connectivity applications. A PIC microcontroller (MCU) is a compact, self-contained computing device built around a Harvard-architecture CPU, on-chip flash program memory, data RAM, and a rich set of digital and analog peripherals. Within the broader semiconductor hierarchy, the PIC24F family sits between 8-bit PIC16/PIC18 parts and the 32-bit PIC32MX/dsPIC33 line, offering 16-bit data paths and 24-bit instruction words. The PIC24FJ128GA108 belongs to the 64/80/100-pin general-purpose GA1 family with Peripheral Pin Select (PPS), a hardware remap mechanism that lets designers assign digital peripherals to physical pins via software rather than fixed silicon routing. Key differentiating features of this device include Peripheral Pin Select for flexible I/O mapping, hardware Real-Time Clock and Calendar (RTCC) with calendar mode, four UART modules, three SPI interfaces, three I2C channels, and 23 independent timers including 16-bit and 32-bit variants. The 128KB self-programmable flash supports in-application programming (IAP), enabling firmware updates in the field without external bootloader memory. Dual-partition flash operation allows safe live firmware upgrades. The architecture uses a 16-bit modified Harvard datapath with 24-bit instructions, achieving 32 MIPS at 32 MHz while consuming only a few mA/MIPS in active mode. nanoWatt Technology adds deep sleep, sleep, idle and doze operating modes that bring quiescent current below 100 nA with the RTCC active - critical for battery-powered sensor nodes and metering products that must spend years on a single cell. Typical applications include industrial control panels with multi-protocol serial interfaces, medical handheld instruments requiring low-noise analog and long battery life, automotive body and infotainment subsystems, USB/HID human-interface products, and graphics or touch-interface HMIs using the integrated Parallel Master Port (PMP). The wide peripheral count also suits data loggers and multi-channel sensor hubs. When designing with this part, leverage Peripheral Pin Select to optimize PCB routing and reduce board layer count. Place a 10uF bulk capacitor plus 0.1uF decoupling near each power pin, and route the 32.768 kHz crystal traces symmetrically with grounded guard rings for low-noise RTCC operation. This page consolidates distributor pricing, drop-in alternatives within the GA1 family, and practical design notes not collected in any single manufacturer document.

Cotización Contacto
PIC24FJ128GA108-I/PT - 16-Bit 32MHz 128KB Flash MCU | Microchip
PIC24FJ128GA108-I/PT

PIC24FJ128GA108-I/PT - 16-Bit 32MHz 128KB Flash MCU | Microchip

The Microchip Technology PIC24FJ128GA108-I/PT is a 16-bit general-purpose Flash microcontroller from the PIC24F family, delivering up to 16 MIPS performance at 32 MHz core clock. It integrates 128 KB of program Flash, 16 KB of SRAM, and up to 69 I/O pins in a 4-bit 80-lead TQFP (12x12 mm) package, and uses a modified Harvard architecture with a 17-bit by 16-bit hardware multiplier and 16-bit by 16-bit hardware divider for efficient C-compiler-optimized signal processing. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash/ROM), data memory (RAM), and a configurable set of peripherals such as timers, communication controllers, and analog blocks. Within the broader semiconductor hierarchy, the PIC24FJ128GA108 sits under: microcontroller -> embedded processor -> RISC 16-bit MCU -> Flash MCU -> PIC24F family. The 24F series is Microchip's low-power eXtreme Low Power (XLP) tier designed for battery and energy-harvesting applications where standby current and peripheral flexibility matter more than raw compute throughput. Key features include 3x I2C, 3x SPI, 4x UART channels, 23 independent timers, a 16-channel 10-bit ADC, a 9-channel 16-bit PWM/timer/capture block, and Peripheral Pin Select (PPS) that allows remapping of digital peripherals to virtually any I/O. A Real-Time Clock and Calendar (RTCC) with on-chip 32 kHz oscillator support, plus sub-100 nA standby current, enable long-life battery-backed designs. On-chip debug is supported via 2-wire ICD, and the device operates across a 2.0 V to 3.6 V range. The architecture uses a 16-bit wide datapath with C-compiler-optimized instruction set, single-cycle hardware multiply/divide, and a deep working-register array. Combined with PPS, this greatly simplifies PCB routing in 80-TQFP designs and reduces BOM cost by eliminating external peripheral muxes. Typical applications include industrial control panels, low-power IoT sensor hubs, consumer human-interface controllers, medical handhelds, and automotive body/comfort modules. With its large RAM, the part is well-suited to USB/HID stacks, graphics libraries, and protocol buffering. When designing with this device, plan VDD decoupling close to every VDD/VSS pair, keep the 80-TQFP land pattern matched to a 12x12 mm thermal pad, and verify PPS register assignments against the desired pinout before PCB tape-out - changes are easier in firmware than in hardware. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the standalone Microchip datasheet, helping procurement and engineering teams make a faster selection decision.

Cotización Contacto
PIC24FJ128GA108T-I/PT - 16-bit 32MHz 128KB Flash MCU TQFP-80 | Microchip
PIC24FJ128GA108T-I/PT

PIC24FJ128GA108T-I/PT - 16-bit 32MHz 128KB Flash MCU TQFP-80 | Microchip

The Microchip Technology PIC24FJ128GA108T-I/PT is a 16-bit PIC® 24F microcontroller featuring 128 KB Flash, 16 KB RAM, and a 32 MHz (16 MIPS) core, housed in an 80-pin TQFP (PT) 12x12 mm package. It belongs to the PIC24FJ128GA1xx family of general-purpose 16-bit Flash MCUs and operates from 2.0V to 3.6V, with industrial-grade -40C to +85C temperature range. What is a 16-bit Flash microcontroller? A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and programmable peripherals such as timers, UARTs, SPIs, and I2Cs. A 16-bit Flash MCU, like the PIC24FJ128GA108, uses a 16-bit data path (versus 8-bit for legacy MCUs), enabling higher arithmetic throughput and richer peripheral integration. Within the product hierarchy, the PIC24FJ128GA108 sits as: microcontroller -> 16-bit MCU -> PIC24F family -> general-purpose Flash MCU -> semiconductor IC. Key features include Peripheral Pin Select (PPS) for flexible remapping of digital peripherals, three I2C, three SPI, four UART interfaces, 23 independent timers, and a 10-bit ADC with up to 16 channels depending on package variant. The device also offers a Real-Time Clock/Calendar (RTCC) module and an ultra-low-power sleep current below 100 nA. The PIC24FJ128GA108 uses Microchip's modified Harvard architecture with a 16-bit wide instruction set and 24-bit instructions, delivering 16 MIPS at 32 MHz from a single 3.3V supply. It features a hardware multiply/divide unit, DMA controller, and a parallel master port for external bus expansion where supported. Typical applications include industrial sensor hubs, low-power connected devices, USB/HID peripherals, multi-protocol gateways, and human-machine interface (HMI) controllers. The combination of large RAM (16 KB), multiple serial ports, and PPS makes the part especially useful as a system coordinator in mixed-signal embedded designs. When designing with this MCU, plan the JTAG/ICSP pin allocation early, since pins used for in-circuit programming must not be repurposed as outputs. The 80-pin TQFP variant exposes the maximum peripheral count in the family, while smaller 64-pin and 100-pin variants trade peripheral count for board area. This page synthesizes distributor pricing, drop-in alternative MPNs from the same family, and practical design notes that complement the manufacturer datasheet with cross-brand and cross-package context.

Cotización Contacto
PIC24FJ128GA110-I/PT - 16-Bit 32MHz 128KB Flash MCU | Microchip
PIC24FJ128GA110-I/PT

PIC24FJ128GA110-I/PT - 16-Bit 32MHz 128KB Flash MCU | Microchip

The Microchip Technology PIC24FJ128GA110-I/PT is a 16-bit PIC24F microcontroller based on the eXtreme Low Power (XLP) architecture, delivering up to 32 MHz / 16 MIPS performance from a 2.0V to 3.6V supply in a 100-pin TQFP (12x12 mm) package. It integrates 128 KB of self-programmable Flash program memory (43K x 24 words), 16 KB of RAM, and rich connectivity peripherals including 3x I2C, 3x SPI, and 4x UART interfaces. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one silicon die. The PIC24F family sits within Microchip's 16-bit MCU portfolio (hypernym: MCU -> microcontroller -> embedded controller -> semiconductor), bridging 8-bit PIC10/12/16/18 devices and 32-bit PIC32 parts. The 'FJ' prefix denotes Flash program memory with XLP technology, optimized for battery-powered and energy-harvesting designs where quiescent current under 100 nA is mandatory. Key features of the PIC24FJ128GA110-I/PT include 23 independent timers (5 x 16-bit and 18 x 16-bit via peripherals), a 10-bit 1.1 Msps Analog-to-Digital Converter (ADC) with up to 32 input channels, two analog comparators, an RTCC with calendar mode, and a Parallel Master Port (PMP) for external bus expansion. Hardware crypto accelerator, CTMU (Capacitive Touch mTouch) module, and five CCP/ECCP modules support motor drive, SMPS control, and human-interface touch sensing without external ICs. Architecturally, the PIC24FJ128GA110-I/PT uses a modified Harvard bus with a 24-bit instruction word and 16-bit data path, enabling compact C code while supporting linear addressing up to 16 MB. The XLP design uses dynamic power management and deep-sleep modes that draw less than 100 nA with RAM retention, while Run mode current is typically under 1 mA/MIPS - a sweet spot for portable instrumentation. Typical applications include industrial sensor hubs, USB human-interface devices (HID), portable medical monitors, remote controls, home automation gateways, and low-power wireless sensor nodes. The 100-pin TQFP exposes enough I/O (up to 85 GPIOs) for color TFT displays and parallel memory expansion, while the 16 KB RAM buffer comfortably holds TCP/IP stacks for embedded connectivity. Automotive-grade versions exist in the same family (e.g., PIC24FJ128GA110-I/PT is commercial grade). Design consideration: the I-temp grade (-40C to +85C) suffix 'I' makes this part suitable for industrial environments, but the 100-pin TQFP requires a 4-layer PCB for clean decoupling; route VDD/VSS pairs to a solid internal ground plane and place 100 nF + 1 uF caps within 5 mm of each VDD pin. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical PCB layout notes not found in the manufacturer datasheet alone.

Cotización Contacto
PIC24FJ128GA110T-I/PF - 16-Bit MCU, 128KB Flash, 100-TQFP | Microchip
PIC24FJ128GA110T-I/PF

PIC24FJ128GA110T-I/PF - 16-Bit MCU, 128KB Flash, 100-TQFP | Microchip

The Microchip Technology PIC24FJ128GA110T-I/PF is a 16-bit PIC microcontroller from the PIC24F family with eXtreme Low Power technology, delivering up to 32 MHz (16 MIPS) performance at 3.3V in a 100-pin TQFP (14x14 mm) package. It integrates 128 KB of Flash program memory (43K x 24 words), 16 KB of SRAM, and rich connectivity peripherals including 3x I2C, 3x SPI, 4x UART, and 23 independent timers for general-purpose embedded designs. A 16-bit microcontroller (MCU) is a microprocessor core with a 16-bit data path and instruction set, sitting in the hierarchy between 8-bit MCUs (such as the PIC16 family) and 32-bit MCUs (such as PIC32 or ARM Cortex-M). The PIC24F family in particular uses a modified Harvard RISC architecture with hardware multiply/divide and is aimed at low-power, mixed-signal applications such as industrial control, sensor hubs, and Human Interface Devices (HID). Compared with 8-bit cores, 16-bit cores offer higher code density, larger linear memory maps, and richer peripheral integration while retaining deterministic interrupt response. Key features of the PIC24FJ128GA110 include <100 nA standby current for battery-backed designs, hardware Real-Time Clock/Calendar (RTCC) with self-contained power domain, up to 85 I/O pins with 5V-tolerant inputs, 16-channel 10-bit ADC with 500 ksps conversion rate, and CTMU support for capacitive touch. The device operates from 2.0V to 3.6V across an industrial -40C to +85C temperature range and supports Microchip's nanoWatt XLP power-saving modes (Sleep, Deep Sleep, VBAT). At the silicon level, the PIC24FJ128GA110 uses a flash-friendly CMOS process with on-chip voltage regulation that keeps the core running while I/O ports operate at higher voltages, eliminating the need for external level shifters in 5V-tolerant scenarios. The architecture combines a 16-bit ALU with a 24-bit instruction word for compact, orthogonal C-compiled code, and the integrated DMA controller offloads data movement from the CPU to peripheral endpoints such as the UART, SPI, ADC, and PMP. Typical applications include industrial sensor interfaces, USB HID/CDC devices (when paired with an external transceiver), home automation controllers, low-power wireless sensor nodes, and battery-backed data loggers. The 100-pin TQFP package also gives designers enough I/O for parallel TFT displays, PMP/EPMP bus interfaces, and multi-UART gateway bridges. When designing with this part, note that the PIC24FJ128GA110T-I/PF is the TQFP-packaged tape-and-reel variant, while the PIC24FJ128GA110-I/PF (tray) is identical silicon; choose the reel suffix for SMT assembly. Plan VBAT retention current carefully and add proper decoupling (100 nF + bulk) on each VDD/VSS pin pair to avoid noise-induced RTCC drift. This page synthesizes distributor pricing for the 100-TQFP reel variant, drop-in TQFP-100 alternatives (PIC24FJ128GA110-I/PF, PIC24FJ128GA010-I/PF), and practical PCB layout notes not consolidated in the manufacturer datasheet.

Cotización Contacto
PIC24FJ128GA202-E/SO - 16-bit 32MHz MCU 128KB Flash 28-SOIC | Microchip
PIC24FJ128GA202-E/SO

PIC24FJ128GA202-E/SO - 16-bit 32MHz MCU 128KB Flash 28-SOIC | Microchip

The Microchip PIC24FJ128GA202-E/SO is a 16-bit microcontroller from the PIC® XLP™ 24F family featuring an integrated crypto engine and eXtreme Low Power technology, housed in a 28-pin SOIC (SO) wide-body package. It integrates 128 KB of Flash program memory (43K × 24), 8 KB of SRAM, and operates at up to 32 MHz delivering 16 MIPS of CPU throughput at 3.3 V. The automotive-grade -E suffix and 28-SOIC wide-body footprint make it suitable for both industrial and automotive embedded designs. A 16-bit microcontroller (MCU) is a programmable computing device built around a 16-bit data path, intermediate between 8-bit MCUs (simpler, lower cost, lower performance) and 32-bit MCUs (highest performance). The PIC24F family uses a modified Harvard RISC architecture with 16-bit instructions and 24-bit instruction words, delivering deterministic throughput while keeping the power consumption typical of 8-bit designs. Within the power-management IC hierarchy, MCUs sit alongside voltage regulators, supervisors, and motor drivers, providing the intelligence that controls the analog power chain. The PIC24FJ128GA202-E/SO's headline features are eXtreme Low Power (XLP) operation with nanoWatt XLP sleep currents as low as 20 nA in deep sleep, an integrated crypto engine supporting AES, DES, 3DES, SHA-1/MD5 hashing, and random number generation, and a rich peripheral set including a 10-bit ADC with up to 13 channels, multiple UART/SPI/I²C interfaces, and configurable PWM/timers. This combination enables secure connected sensor nodes, secure firmware update paths, and battery-powered designs where low standby current is critical. Technically, the device operates from 2.0 V to 3.6 V, supports internal RC or external crystal oscillators with PLL for 32 MHz operation, and offers 5V-tolerant I/O on most pins. The crypto module offloads encryption from the CPU, leaving MIPS budget for application logic. The integrated 32 KB of EEPROM emulation (via Flash self-write) and the Peripheral Pin Select (PPS) subsystem give designers board-layout flexibility that is uncommon in this class. Typical applications include secure IoT sensor endpoints, automotive body controllers, secure payment terminals, smart metering, and low-power wireless sensor hubs. The integrated crypto engine makes it well suited to designs that must implement TLS-style secure boot or message authentication without an external security IC. When designing with this part, take advantage of Peripheral Pin Select (PPS) to remap digital peripherals to alternate I/O pins, simplifying PCB layout. For battery life, the nanoWatt XLP sleep modes drop current to nanoampere levels - use them aggressively by gating peripherals with the PMD module and RTCC for wake. This page synthesizes distributor pricing from DigiKey and LCSC, drop-in same-package and cross-package alternatives from Microchip and competing vendors, and practical design notes not collected in any single manufacturer datasheet.

Cotización Contacto