PIC24FJ128DA110T-I/BG - 16-bit 32MHz MCU, 128KB Flash, 121-TFBGA | Microchip
N.º de pieza: PIC24FJ128DA110T-I/BG ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $9.8 | $9,80 |
| 10 | $9.05 | $90,50 |
| 100 | $8.2 | $820,00 |
| 500 | $7.4 | $3.700,00 |
| 1.000 | $6.55 | $6.550,00 |
PIC24FJ128DA110T-I/BG Descripción general
Background Knowledge: A 16-bit microcontroller (MCU) is a programmable embedded processor that balances the throughput of 32-bit cores with the code density and low power consumption typical of 8-bit parts. The PIC24F family sits between Microchip's PIC16/PIC18 (8-bit) and dsPIC/PIC32 (16/32-bit) portfolios, offering DSP-class instructions, hardware multiply/divide, and linear memory addressing. In a typical system hierarchy, an MCU belongs to the embedded-computing class of semiconductors, sub-classified as microcontroller -> flash MCU -> 16-bit MCU -> low-power MCU -> graphics-enabled MCU. The integrated graphics controller and USB OTG put the PIC24FJ128DA110 into a niche for color LCD/graphics products.
Key features include 128 KB self-programmable Flash, 24 KB SRAM, hardware RTCC, 16-bit timers, a 10/12-bit ADC, and a graphics controller capable of directly driving displays up to 4.3-inch WQVGA (480x272) resolution. The peripheral set also includes UART, SPI, I2C, and a USB 2.0 OTG controller with integrated PHY.
Technical depth: The PIC24FJ128DA110 uses a Harvard architecture with separate program and data paths, a 16-bit data bus, and a 24-bit instruction word. The modified RISC core executes most instructions in one cycle, with hardware multiply and divide. The integrated graphics accelerator offloads draw operations from the CPU, allowing real-time GUI updates at low MHz.
Typical applications include embedded graphical user interfaces with color TFT/LCD panels, USB-enabled consumer products, low-cost HMI controllers, portable medical devices, and industrial control panels. It is suited for designs that need USB connectivity plus a display.
When designing with this part, plan PCB escape routing carefully for the 121-ball BGA; an external 12 MHz crystal is recommended when USB Full-Speed accuracy is required. A 4-layer PCB with stitched ground and a separate analog ground island improves ADC performance.
Alternativas directas para PIC24FJ128DA110T-I/BG — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con PIC24FJ128DA110T-I/BG (mismo factor de forma y huella) — difiere en Core Architecture, Package, ADC, Program Memory (Flash), Graphics Controller.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
PIC24FJ128DA110-I/BG
✅ Sustitución directa✓ En stock
$5.25 / unidad
Ver hoja de datos →PIC24FJ256DA110-I/BG
✅ Sustitución directa✓ En stock
$9.15 / unidad
Ver hoja de datos →PIC24FJ128DA110T-I/BG Valores máximos y características eléctricas
| Core Architecture | PIC24F 16-bit Modified Harvard |
| Operating Frequency (max) | 32 MHz |
| Program Memory (Flash) | 128 KB (43K x 24) |
| RAM Size | 24 KB |
| Number of I/O Pins | 52 |
| Encapsulado | 121-ball TFBGA (10x10 mm) |
| Tipo de montaje | Surface Mount |
| Tensión de alimentación | 2.2 V to 3.6 V |
| Oscillator Type | Internal |
| Temperatura de funcionamiento | -40C to +85C (Industrial) |
| Graphics Controller | Integrated, up to 4.3" WQVGA 480x272 |
| USB Interface | USB 2.0 Full-Speed OTG with on-chip PHY |
| ADC | 10/12-bit SAR ADC |
| Communication Peripherals | UART, SPI, I2C, USB OTG |
| Estado RoHS | Compliant |
| Nivel MSL | MSL3 (per BGA package) |
Configuración de pines de PIC24FJ128DA110T-I/BG
| Pin A1 | RB0 — PORTB I/O pin 0 |
| Pin A2 | RB1 — PORTB I/O pin 1 |
| Pin A3 | RB2 — PORTB I/O pin 2 |
| Pin A4 | RB3 — PORTB I/O pin 3 |
| Pin A5 | RB4 — PORTB I/O pin 4 |
| Pin A6 | RB5 — PORTB I/O pin 5 |
| Pin A7 | RB6 — PORTB I/O pin 6 (ICSPCLK) |
| Pin A8 | RB7 — PORTB I/O pin 7 (ICSPDAT) |
| Pin A9 | RB8 — PORTB I/O pin 8 |
| Pin A10 | RB9 — PORTB I/O pin 9 |
| Pin A11 | RB10 — PORTB I/O pin 10 |
| Pin B1 | RC12 — PORTC I/O pin 12 |
| Pin B2 | RC13 — PORTC I/O pin 13 |
| Pin B3 | RC14 — PORTC I/O pin 14 |
| Pin B4 | RC15 — PORTC I/O pin 15 |
| Pin B5 | VSS — Ground reference |
| Pin B6 | VDD — Core logic supply 2.2-3.6V |
| Pin B7 | OSC1 — Crystal oscillator input |
| Pin B8 | OSC2 — Crystal oscillator output |
| Pin B9 | RD0 — PORTD I/O pin 0 |
| Pin B10 | RD1 — PORTD I/O pin 1 |
| Pin B11 | RD2 — PORTD I/O pin 2 |
| Pin C1 | RD3 — PORTD I/O pin 3 |
| Pin C2 | RD4 — PORTD I/O pin 4 |
| Pin C3 | RD5 — PORTD I/O pin 5 |
| Pin C4 | RD6 — PORTD I/O pin 6 |
| Pin C5 | RD7 — PORTD I/O pin 7 |
| Pin C6 | RD8 — PORTD I/O pin 8 |
| Pin C7 | RD9 — PORTD I/O pin 9 |
| Pin C8 | RD10 — PORTD I/O pin 10 |
| Pin C9 | RD11 — PORTD I/O pin 11 |
| Pin C10 | RD12 — PORTD I/O pin 12 |
| Pin C11 | RD13 — PORTD I/O pin 13 |
| Pin D1 | RD14 — PORTD I/O pin 14 |
| Pin D2 | RD15 — PORTD I/O pin 15 |
| Pin D3 | RE0 — PORTE I/O pin 0 |
| Pin D4 | RE1 — PORTE I/O pin 1 |
| Pin D5 | RE2 — PORTE I/O pin 2 |
| Pin D6 | RE3 — PORTE I/O pin 3 |
| Pin D7 | RE4 — PORTE I/O pin 4 |
| Pin D8 | RE5 — PORTE I/O pin 5 |
| Pin D9 | RE6 — PORTE I/O pin 6 |
| Pin D10 | RE7 — PORTE I/O pin 7 |
| Pin D11 | RF0 — PORTF I/O pin 0 |
| Pin E1 | RF1 — PORTF I/O pin 1 |
| Pin E2 | RF2 — PORTF I/O pin 2 |
| Pin E3 | RF3 — PORTF I/O pin 3 |
| Pin E4 | RF4 — PORTF I/O pin 4 |
| Pin E5 | RF5 — PORTF I/O pin 5 |
| Pin E6 | RF6 — PORTF I/O pin 6 |
| Pin E7 | RF7 — PORTF I/O pin 7 |
| Pin E8 | RF8 — PORTF I/O pin 8 |
| Pin E9 | RG0 — PORTG I/O pin 0 |
| Pin E10 | RG1 — PORTG I/O pin 1 |
| Pin E11 | RG2 — PORTG I/O pin 2 |
| Pin F1 | RG3 — PORTG I/O pin 3 |
| Pin F2 | RG6 — PORTG I/O pin 6 (alternate) |
| Pin F3 | RG7 — PORTG I/O pin 7 |
| Pin F4 | RG8 — PORTG I/O pin 8 |
| Pin F5 | RG9 — PORTG I/O pin 9 |
| Pin F6 | RA0 — PORTA I/O pin 0 (AN0) |
| Pin F7 | RA1 — PORTA I/O pin 1 (AN1) |
| Pin F8 | RA2 — PORTA I/O pin 2 (AN2) |
| Pin F9 | RA3 — PORTA I/O pin 3 (AN3) |
| Pin F10 | RA4 — PORTA I/O pin 4 |
| Pin F11 | RA5 — PORTA I/O pin 5 |
| Pin G1 | RA6 — PORTA I/O pin 6 |
| Pin G2 | RA7 — PORTA I/O pin 7 |
| Pin G3 | RA8 — PORTA I/O pin 8 |
| Pin G4 | RA9 — PORTA I/O pin 9 |
| Pin G5 | RA10 — PORTA I/O pin 10 |
| Pin G6 | RA11 — PORTA I/O pin 11 |
| Pin G7 | RA12 — PORTA I/O pin 12 |
| Pin G8 | RA13 — PORTA I/O pin 13 |
| Pin G9 | RA14 — PORTA I/O pin 14 |
| Pin G10 | RA15 — PORTA I/O pin 15 |
| Pin G11 | VDD — Supply 2.2-3.6V |
| Pin H1 | VSS — Ground |
| Pin H2 | VCAP — Core voltage decoupling (connect 10uF) |
| Pin H3 | VUSB — USB transceiver supply 3.0-3.6V |
| Pin H4 | D+ — USB D+ data line |
| Pin H5 | D- — USB D- data line |
| Pin H6 | RC0 — PORTC I/O pin 0 |
| Pin H7 | RC1 — PORTC I/O pin 1 |
| Pin H8 | RC2 — PORTC I/O pin 2 |
| Pin H9 | RC3 — PORTC I/O pin 3 |
| Pin H10 | RC4 — PORTC I/O pin 4 |
| Pin H11 | RC5 — PORTC I/O pin 5 |
| Pin J1 | RC6 — PORTC I/O pin 6 |
| Pin J2 | RC7 — PORTC I/O pin 7 |
| Pin J3 | RC8 — PORTC I/O pin 8 |
| Pin J4 | RC9 — PORTC I/O pin 9 |
| Pin J5 | RC10 — PORTC I/O pin 10 |
| Pin J6 | RC11 — PORTC I/O pin 11 |
| Pin J7 | RG13 — PORTG I/O pin 13 |
| Pin J8 | RG14 — PORTG I/O pin 14 |
| Pin J9 | RG15 — PORTG I/O pin 15 |
| Pin J10 | RG12 — PORTG I/O pin 12 |
| Pin J11 | VDD — Supply 2.2-3.6V |
| Pin K1 | VSS — Ground |
| Pin K2 | SDA1 — I2C1 data |
| Pin K3 | SCL1 — I2C1 clock |
| Pin K4 | SDA2 — I2C2 data |
| Pin K5 | SCL2 — I2C2 clock |
| Pin K6 | RF12 — PORTF I/O pin 12 |
| Pin K7 | RF13 — PORTF I/O pin 13 |
| Pin K8 | RTCC — RTCC output |
| Pin K9 | CVREF — Comparator voltage reference output |
| Pin K10 | VREF+ — ADC voltage reference positive |
| Pin K11 | VREF- — ADC voltage reference negative |
| Pin L1 | AVDD — Analog supply 2.2-3.6V |
| Pin L2 | AVSS — Analog ground |
| Pin L3 | AN6 — Analog input 6 |
| Pin L4 | AN7 — Analog input 7 |
| Pin L5 | AN8 — Analog input 8 |
| Pin L6 | AN9 — Analog input 9 |
| Pin L7 | AN10 — Analog input 10 |
| Pin L8 | AN11 — Analog input 11 |
| Pin L9 | AN12 — Analog input 12 |
| Pin L10 | AN13 — Analog input 13 |
| Pin L11 | AN14 — Analog input 14 |
| Pin M1 | AN15 — Analog input 15 |
| Pin M2 | AN4 — Analog input 4 |
| Pin M3 | AN5 — Analog input 5 |
| Pin M4 | VBAT — RTCC battery backup supply |
| Pin M5 | SOSCI — Secondary oscillator crystal input |
| Pin M6 | SOSCO — Secondary oscillator crystal output |
| Pin M7 | MCLR — Master clear (reset) input |
| Pin M8 | DISPEN — Graphics controller enable |
| Pin M9 | DISPRW — Display read/write control |
| Pin M10 | DISPCS — Display chip select |
| Pin M11 | DISPBL — Display backlight control |
Aplicaciones típicas
PIC24FJ128DA110T-I/BG es adecuado para 6 aplicacións: Color TFT/LCD HMI Controller, USB-Enabled Industrial Sensor Hub, Portable Medical Glucose/Infusion Reader, USB Barcode / QR Scanner Module, Smart Home Touch Panel Controller, Educational Microcontroller Trainer Board.
Color TFT/LCD HMI Controller
The PIC24FJ128DA110T-I/BG drives color TFT panels up to 4.3-inch WQVGA at 480x272 directly via its integrated graphics controller, eliminating external display ICs. Its 32 MHz 16-bit core and hardware line-draw accelerator deliver smooth 30+ FPS menu updates while leaving 24 KB RAM for double-buffered frame tiles. The 2.2-3.6 V supply range matches common single-cell Li-Ion HMI designs. USB OTG is available for touch data ingest or host-side firmware update on the production line.
Recomendado
USB-Enabled Industrial Sensor Hub
With integrated USB 2.0 Full-Speed OTG, the PIC24FJ128DA110T-I/BG acts as a USB device or host for industrial sensor data logging. The 10/12-bit ADC, 52 I/O pins, and multiple UART/SPI/I2C peripherals handle simultaneous multi-sensor sampling, while 128 KB Flash supports on-device calibration tables. Industrial -40C to +85C operation suits factory-floor enclosures, and 32 MHz core throughput meets typical 1 kHz control loop rates.
Recomendado
Portable Medical Glucose/Infusion Reader
The PIC24FJ128DA110T-I/BG's 32 MHz performance, low-power PIC24F core, and integrated graphics controller suit handheld medical readers with monochrome or color TFT displays. 24 KB RAM stores waveform or trend data while 128 KB Flash holds application firmware and ASCII LCD fonts. On-chip USB OTG supports wired data sync to PCs, and 2.2 V operation enables a single Li-Ion or 2xAA supply. Industrial temperature grade meets typical home-healthcare thermal envelopes.
Recomendado
USB Barcode / QR Scanner Module
The integrated USB Full-Speed OTG with on-chip PHY enables PIC24FJ128DA110T-I/BG to enumerate as a USB HID keyboard or vendor-class barcode scanner without external transceivers. The 52 I/O pins accept image-sensor data, while 128 KB Flash supports image-decoding libraries. 32 MHz core runs 1D/2D decode in <100 ms for typical barcodes, and the 121-ball TFBGA package allows compact scanner head designs with on-board graphics for diagnostics.
Recomendado
Smart Home Touch Panel Controller
The PIC24FJ128DA110T-I/BG's integrated graphics controller, 52 I/O, and USB OTG suit wall-mount smart-home touch panels driving 3.5 to 4.3-inch TFTs. The PIC24F core's Idle/Sleep modes reduce average current to support battery-backed wall mounts during brown-outs. 128 KB Flash stores GUI assets, Zigbee/BLE command tables, and device pairing state. Industrial temperature grade tolerates attics, garages, and outdoor-rated enclosures.
Recomendado
Educational Microcontroller Trainer Board
Educational labs use PIC24FJ128DA110T-I/BG as a modernized upgrade to PIC18F training kits, exposing 16-bit DSP-class instructions, USB OTG, and integrated graphics. The 121-ball TFBGA gives students hands-on BGA soldering practice, and 128 KB Flash / 24 KB RAM supports moderately complex projects like audio effects, USB MIDI, or mini-OS with multi-tasking. MPLAB X + XC16 free tier lowers entry cost for student labs and maker spaces.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para PIC24FJ128DA110T-I/BG — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | PIC24FJ128DA110-I/BG | PIC24FJ256DA110-I/BG | PIC24FJ128DA106T-I/MR | PIC24FJ128DA106-I/PT |
|---|---|---|---|---|---|
| Package | 121-TFBGA (BG, 10x10 mm) | 121-TFBGA (BG, 10x10 mm) - same | 121-TFBGA (BG, 10x10 mm) - same | TQFP-64 - different | TQFP-64 - different |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core / Architecture | PIC24F 16-bit, 32 MHz | PIC24F 16-bit, 32 MHz | PIC24F 16-bit, 32 MHz | PIC24F 16-bit, 32 MHz | PIC24F 16-bit, 32 MHz |
| Program Flash | 128 KB (43K x 24) | 128 KB | 256 KB (+100%) | 64 KB (-50%) | 64 KB (-50%) |
| RAM | 24 KB | 24 KB | 32 KB (+33%) | 8 KB (-67%) | 8 KB (-67%) |
| Graphics Controller | Yes (up to 4.3" WQVGA) | Yes | Yes | Yes | Yes |
| USB OTG | Yes (FS, on-chip PHY) | Yes | Yes | Yes | Yes |
| Number of I/O | 52 | 52 | 52 | 53 | 53 |
| Supply Voltage | 2.2 V to 3.6 V | 2.2 V to 3.6 V | 2.2 V to 3.6 V | 2.2 V to 3.6 V | 2.2 V to 3.6 V |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
Diferenciadores clave
- Integrated graphics controller eliminates external display IC (frente a PIC24FJ128GA110 family)
- USB 2.0 Full-Speed OTG with on-chip PHY (frente a PIC24FJ128DA106 in TQFP-64)
- Higher pin count for full TFT data bus (frente a PIC24FJ128DA106 in QFN-64 (PIC24FJ128DA106-I/MR))
Notas de diseño
The 121-ball TFBGA at 0.8 mm pitch requires a 4-layer PCB minimum with a continuous ground plane under the BGA. Microstrip traces of 100 ohm differential impedance are needed for the USB D+/D- pair, and a 90-ohm differential is mandatory for USB Full-Speed compliance. Route the D+/D- pair first, length-matched within 150 mil. Decoupling: place 100 nF + 4.7 uF X5R on every VDD/VSS pair within 50 mil of the ball. Avoid running signal traces under the BGA, and stitch the package perimeter with a 4-via-per-side ground fence.
The PIC24FJ128DA110T-I/BG has a dedicated VCAP pin that requires a low-ESR 10 uF X5R capacitor plus a parallel 100 nF ceramic. This capacitor stabilizes the internal 1.8V core regulator. VUSB must be tied to 3.0-3.6V even when USB is unused, and a 1 uF + 100 nF decoupling pair is needed at VUSB. AVDD/AVSS should be filtered with a ferrite bead or 10 ohm resistor from VDD for best ADC noise performance. VBAT must be present (or tied to VDD) when the RTCC is used.
Common pitfalls: (1) forgetting MCLR pull-up; MCLR is active-low and must see a 10 kohm pull-up to VDD for normal operation. (2) Using the internal 8 MHz FRC for USB without enabling the PLL USB clock recovery - USB Full-Speed requires the 48 MHz USB clock derived from a precise primary oscillator. (3) Confusing the PIC24FJ128DA110 (with graphics) with PIC24FJ128GA110 (without graphics). (4) Driving LEDs directly from high-drive pins without series resistors. (5) Boot fail if DISPEN is held low during POR - graphics controller must be properly enabled in firmware before display access.
Use a star-ground topology for analog and digital grounds, joining at one point near the PIC24FJ128DA110T-I/BG. Keep the crystal oscillator traces (OSC1/OSC2) under 10 mm, surrounded by a ground guard ring, and place the load caps within 3 mm of the OSC pins. The secondary 32.768 kHz crystal for the RTCC must use the dedicated SOSCI/SOSCO pins with its own guard ring. JTAG/ICSP traces (PGECx/PGEDx) should be short (< 50 mm) and not share layers with high-speed USB or display data.
Información de cumplimiento
RoHS and REACH compliant per Microchip product page. Industrial temperature grade -40C to +85C. AEC-Q100 qualification not applicable - this part is not marketed for automotive safety use; consider PIC24FJ series with automotive grade for vehicle applications.