Microcontroladores

Productos (18734)

PIC24HJ128GP206A-E/MR - 16-bit 128KB Flash MCU 64-VQFN | Microchip
PIC24HJ128GP206A-E/MR

PIC24HJ128GP206A-E/MR - 16-bit 128KB Flash MCU 64-VQFN | Microchip

The Microchip Technology PIC24HJ128GP206A-E/MR is a 16-bit general-purpose microcontroller from the PIC24H family with 128 KB of Flash program memory, 8 KB of RAM, and 70 MIPS CPU throughput at 3.3V, housed in a 64-pin VQFN (MR) package. It operates from 3.0V to 3.6V, supports an industrial extended temperature range of -40C to +125C, and integrates a rich peripheral set including multiple UART/SPI/IObI interfaces, a 16-bit timer/counter block, a 10/12-bit ADC, and a Parallel Master Port. What is a PIC24 microcontroller? A PIC24 microcontroller is a 16-bit modified Harvard RISC microcontroller from Microchip's 16-bit portfolio, sitting between the 8-bit PIC18 family and the 32-bit PIC32MX/SA1 families. The PIC24H series specifically targets high-performance 16-bit control, providing up to 70 MIPS throughput while maintaining strong code density and pin compatibility with the dsPIC33F family of Digital Signal Controllers (DSCs). Within the broader taxonomy, PIC24H sits under the hierarchy: microcontroller (MCU) -> embedded microcontroller -> 16-bit MCU -> dsPIC/PIC24 family -> PIC24H sub-family. Key features include 128 KB Flash, 8 KB SRAM, hardware multiply/divide, a 16-channel 12-bit ADC, two UART modules, two SPI modules, two I2C modules, and a Parallel Master Port (PMP) for external bus/parallel display/LCD interfacing. The 16-bit core supports C-compiled firmware with deterministic interrupt latency, while on-chip peripherals address motor control, sensor fusion, and human-machine interface (HMI) tasks. The architecture employs a 16-bit modified Harvard RISC core with separate program and data buses, hardware multiplier, and zero-overhead loop control. PMP, DMA, and configurable I/O make the device attractive for mixed-signal embedded designs requiring both signal acquisition and parallel HMI capability. Typical applications include industrial motor control, sensor signal conditioning, medical instrumentation, automotive body/comfort modules, consumer white goods, and human-machine interface panels. The 70 MIPS throughput supports real-time control loops and DSP-style filtering tasks. When designing with this part, ensure 3.3V rail decoupling (100 nF + 10 uF bulk) is placed within a few millimetres of all VDD pins. The -E temperature grade supports +125C operation but verify crystal oscillator margins at the temperature extremes. Use JTAG/ICSP for production programming; reserve MCLR as a reset input with the proper pull-up topology. This page synthesizes distributor pricing, verified Microchip datasheet specifications, VQFN-64 layout notes, and drop-in PIC24H/dsPIC33F alternatives that share the same 64-pin VQFN footprint - information gain not consolidated on the manufacturer product page alone.

Cotización Contacto
PIC24HJ128GP206A-E/PT - 16-bit 40 MIPS MCU 128KB Flash | Microchip
PIC24HJ128GP206A-E/PT

PIC24HJ128GP206A-E/PT - 16-bit 40 MIPS MCU 128KB Flash | Microchip

The Microchip Technology PIC24HJ128GP206A-E/PT is a 16-bit RISC PIC24H microcontroller with 128 KB of Flash program memory, executing instructions at up to 40 MIPS (Million Instructions Per Second) from a 3.3 V supply, housed in a 64-pin TQFP package. The die offers 8 KB of SRAM data memory, 16-bit wide datapath, a 16-channel 10/12-bit ADC, multiple UART/SPI/I2C peripherals, and a 16-bit timer/capture/compare/PWM engine. An MCU (Microcontroller Unit) is a single-chip computer integrating a CPU core, program memory, working RAM, and programmable peripherals. The PIC24H family occupies the 16-bit mid-performance tier in Microchip's portfolio: above the 8-bit PIC16/PIC18 in MIPS and code density, but below the 32-bit PIC32 and ARM Cortex-M families in raw throughput. PIC24H MCUs sit in the broader microcontroller -> embedded controller -> semiconductor hierarchy and share pin compatibility with the dsPIC33F DSC family, allowing firmware-compatible migration when DSP instructions become useful. Key features of this part include the enhanced PIC24HJXXXGPX06A/X08A/X10A silicon revision that adds peripheral improvements, an industrial/automotive-grade -40C to +125C operating range (suffix -E), hardware multiplier for DSP-class math, JTAG and ICSP in-circuit debugging, and 5V-tolerant I/O on selected pins. The 40 MIPS core supports deterministic interrupt latency under 5 cycles. Typical applications include industrial motor control (BLDC/PMSM FOC loops), sensor signal conditioning with on-chip ADC, CAN-connected automotive body controllers, building automation controllers, and human-machine interface (HMI) panels. The combination of deterministic 16-bit performance and dsPIC33F pin compatibility makes it a long-life embedded platform. When designing with this PIC24HJ128GP206A-E/PT, place a 10 uF bulk plus 0.1 uF decoupling capacitor within 5 mm of every VDD/VSS pair, keep the analog AVSS/AVDD trace short, and use a 4-layer PCB to manage the 40 MIPS switching noise floor.

Cotización Contacto
PIC24HJ128GP206A-I/MR - 16-bit 40 MIPS MCU 128KB | Microchip
PIC24HJ128GP206A-I/MR

PIC24HJ128GP206A-I/MR - 16-bit 40 MIPS MCU 128KB | Microchip

The Microchip Technology PIC24HJ128GP206A-I/MR is a high-performance 16-bit microcontroller from the PIC24H family, delivering up to 40 MIPS at 3.3V and packaged in a 64-pin QFN (MR) with industrial -40C to +85C temperature rating. A 16-bit microcontroller (MCU) is a programmable processor that executes instructions on 16-bit wide data paths, enabling higher code density and faster arithmetic throughput than 8-bit parts while remaining simpler than 32-bit ARM Cortex-M devices. The PIC24H family sits in Microchip's mid-range 16-bit portfolio, between the PIC24F low-power parts and the dsPIC33F DSP-capable family. The 16-bit data path, large register file, and hardware multiply/divide engine help digital signal conditioning, motor control, and high-speed closed-loop control loops. The MR suffix identifies the 64-pin 9x9 mm QFN surface-mount package with an exposed thermal pad. Key features include 128 KB of Flash program memory, 8 KB of SRAM data memory, two UART/SPI/I2C peripherals (each configurable), 16-channel 10/12-bit ADC, and five 16-bit timers. The PIC24H core supports a single-cycle 17-bit x 17-bit hardware multiplier and a 32-bit divider, enabling deterministic 40 MIPS throughput. The MR package integrates an exposed thermal pad that reduces junction-to-PCB thermal resistance for sustained DSP-style workloads. Architecture is based on a 16-bit Harvard RISC core with separate program and data buses for deterministic interrupt response. The on-chip regulator supports 2.5V-3.6V VDD operation. Two ECAN modules and dual comparator outputs suit the part to industrial CAN nodes, while the integrated ADC with DMA-style conversion sequencing removes CPU overhead for multi-channel sampling. Typical applications include industrial motor drives, sensor signal conditioning, building automation, medical patient monitoring, and embedded CAN nodes. The QFN-64 footprint and 40 MIPS throughput also suit audio processing front-ends and uninterruptible power supply controllers. When designing with this part, allocate the exposed thermal pad to a continuous copper pour and route high-speed traces to minimize ADC crosstalk. Use Microchip's MPLAB X IDE with the XC16 compiler for full register coverage and DSP intrinsics. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving embedded engineers a one-stop selection view.

Cotización Contacto
PIC24HJ128GP206AT-I/PT - 16-bit 40MIPS 128KB Flash MCU | Microchip
PIC24HJ128GP206AT-I/PT

PIC24HJ128GP206AT-I/PT - 16-bit 40MIPS 128KB Flash MCU | Microchip

The Microchip Technology PIC24HJ128GP206AT-I/PT is a high-performance 16-bit microcontroller from the PIC24H family, delivering 40 MIPS at 3.3V and integrating 128KB (43K x 24) of Flash program memory in a 64-pin TQFP (10x10 mm) surface-mount package. Designed for general-purpose embedded applications, it combines a powerful modified Harvard RISC architecture with a rich set of peripherals including multiple DMA channels, PWM modules, integrated ADC, and 53 general-purpose I/O lines for maximum design flexibility. What is a PIC24H microcontroller? The PIC24H is a family of 16-bit microcontrollers from Microchip Technology built on a modified Harvard RISC architecture. Positioned between 8-bit PIC microcontrollers and 32-bit ARM Cortex devices, PIC24H parts balance high MIPS performance (up to 70 MIPS) with deterministic interrupt handling, DSP-friendly instructions, and seamless code migration paths to dsPIC33F digital signal controllers. They belong to the broader category of 16-bit microcontrollers within the microcontroller IC product family. Key features include 8KB of SRAM data memory, 16-channel 10/12-bit ADC, multiple UART/SPI/I2C interfaces, and a wide operating voltage range supporting 3.0V to 3.6V single-supply operation. The 40 MIPS throughput enables real-time DSP-style signal processing, while the 64-pin TQFP footprint provides ample I/O for sensor fusion, motor control, and human-machine interface designs. The architecture pairs a 16-bit data path with a 24-bit instruction word, allowing dense, single-cycle arithmetic operations and DSP-oriented instructions such as MAC (multiply-accumulate). On-chip peripherals include a real-time clock-and-calendar, comparators, and a 16-bit timer/counter bank, reducing external component count and BOM cost in compact designs. Typical applications include industrial motor control (BLDC and stepper), uninterruptible power supply (UPS) controllers, medical patient monitoring, automotive body electronics, and consumer audio/DSP effects. The wide peripheral set and deterministic interrupt latency make it equally suitable for closed-loop control loops and real-time data acquisition. When designing with this part, ensure the 64-pin TQFP PCB footprint follows IPC-7351 land-pattern guidelines with 0.50 mm terminal pitch. Decoupling capacitors must be placed adjacent to VDD/AVDD/VSS pins to minimize switching noise. The industrial temperature grade (-40C to +85C) requires derating analysis when used near thermal limits. This page synthesizes distributor pricing, drop-in PIC24H/dsPIC33F alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
PIC24HJ128GP210-I/PF - 16-Bit 40MIPS 128KB Flash MCU | Microchip
PIC24HJ128GP210-I/PF

PIC24HJ128GP210-I/PF - 16-Bit 40MIPS 128KB Flash MCU | Microchip

The Microchip Technology PIC24HJ128GP210-I/PF is a high-performance 16-bit microcontroller from the PIC24H family, featuring a 40 MIPS (Million Instructions Per Second) CPU core and 128 KB of Flash program memory organized as 43K x 24 words, housed in a 100-pin TQFP package (14x14 mm). The device supports a 3.0V to 3.6V supply range and integrates up to 16 KB of RAM plus rich analog and digital peripherals including 12-bit ADC, multiple UART/SPI/I2C interfaces, DMA, and motor-control PWMs. A 16-bit microcontroller (MCU) is a class of embedded processor that balances deterministic real-time control with computational throughput for signal processing and data acquisition. Within the broader taxonomy, the PIC24H sits below 32-bit ARM Cortex-M MCUs and above 8-bit PIC16/PIC18 devices in price/performance. The PIC24H family uses a 16-bit modified Harvard architecture with a 16-bit data path and 24-bit instruction word, optimized for C compiler efficiency and high-speed DSP-style loops. It is pin-compatible with the dsPIC33F DSC family, allowing firmware migration with little to no hardware rework. Key features of the PIC24HJ128GP210-I/PF include a 40 MHz oscillator with PLL, configurable 16-bit timers, 9-channel 10-bit or 12-bit ADC, two comparators, a CRC module, JTAG/ICSP programming/debug, and a wide operating temperature range of -40C to +85C (industrial grade). On-chip DMA offloads peripheral transfers, enabling deterministic throughput without CPU intervention. The 100-pin TQFP provides 85 user I/O pins, suitable for parallel buses and multi-channel sensor aggregation. Architecturally, the PIC24HJ128GP210 employs a 5-stage pipeline, hardware multiply, and zero-overhead loop control suited for closed-loop control loops. The peripheral set - including 8 PWM channels with independent duty/period - is engineered for digital power conversion, motor control, and three-phase inverter designs. Hardware CRC and configurable DMA channels improve reliability and free CPU bandwidth. Typical applications include industrial motor control, digital power conversion, sensor data acquisition, building automation, UPS/inverters, and medical instrumentation. With its rich analog and DSP-style math throughput, it is often used as a low-cost alternative to DSP controllers in moderate-complexity control loops. When designing with this part, ensure the supply rail is regulated within 3.0V-3.6V and decoupling is placed close to each VDD/VSS pin pair. The device is footprint-compatible with dsPIC33F parts, allowing migration to DSP capability without PCB rework. Industrial temperature grade (-I) is required for environments above 70C. This page synthesizes distributor pricing, same-footprint drop-in alternatives, and engineering design notes not consolidated on the manufacturer product page, providing procurement and design teams a faster decision pathway than the datasheet alone.

Cotización Contacto
PIC24HJ128GP210-I/PT - 16-Bit 40MIPS 128KB Flash MCU | Microchip
PIC24HJ128GP210-I/PT

PIC24HJ128GP210-I/PT - 16-Bit 40MIPS 128KB Flash MCU | Microchip

The Microchip Technology PIC24HJ128GP210-I/PT is a high-performance 16-bit microcontroller from the PIC24H family, operating at up to 40 MIPS (Million Instructions Per Second) with a 128 KB (43K x 24) program Flash memory. It is housed in a 100-pin TQFP (PT) package measuring 12x12 mm and is engineered for embedded applications demanding deterministic real-time control and high-throughput DSP-class computation. The device operates from 3.0V to 3.6V and includes 16 KB of RAM alongside 4 KB of auxiliary Flash for non-volatile data storage. What is a PIC24H microcontroller? The PIC24H belongs to the 16-bit PIC microcontroller family, sitting in the hierarchy: 16-bit MCU -> PIC microcontroller -> microcontroller -> embedded processor -> semiconductor. It uses a modified Harvard architecture with separate program and data buses plus a 16-bit wide datapath, giving it several times the processing throughput of 8-bit PIC16/PIC18 parts while retaining the same peripheral-rich, deterministic design philosophy. PIC24H parts are pin-compatible with dsPIC33F digital signal controllers, allowing designers to migrate to DSP performance when needed. Key features of the PIC24HJ128GP210-I/PT include a 40 MHz maximum CPU clock (10 MIPS per MHz), two UART modules, two SPI interfaces, one I2C bus, two CAN modules, a 10-bit ADC with up to 32 input channels, multiple 16-bit timers, and a peripheral pin select (PPS) remapping scheme. The integrated DMA controller offloads data movement from the CPU, and the Parallel Master Port enables external bus expansion for memory-mapped peripherals. The device is supported by Microchip's MPLAB X IDE, XC16 compiler, and a free software stack including USB, TCP/IP, and graphics libraries. Typical applications include industrial motor control, three-phase variable-frequency drives, sensorless BLDC commutation, power-conversion feedback loops, medical instrumentation, and high-speed data-acquisition front-ends. The wide range of motor-control peripherals and the 40 MIPS throughput make it particularly suited to digital PFC and sensorless FOC firmware running on a single chip. Industrial -40C to +85C operating range (the 'I' suffix) supports harsh factory-floor deployment. Design considerations: place a 10 uF bulk capacitor plus a 100 nF decoupling cap adjacent to every VDD/VSS pair, route the 40 MHz crystal traces with a guarded ground, and respect the ICSP programming pin pairings (PGECx/PGEDx must be used as matched pairs). This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto
PIC24HJ128GP210A-E/PF - 16-bit MCU 40MIPS 128KB Flash | Microchip
PIC24HJ128GP210A-E/PF

PIC24HJ128GP210A-E/PF - 16-bit MCU 40MIPS 128KB Flash | Microchip

The Microchip Technology PIC24HJ128GP210A-E/PF is a high-performance 16-bit microcontroller from the PIC24H family, delivering 40 MIPS throughput at 3.3 V in a 100-pin TQFP (PF) package with -40C to +125C automotive-grade temperature range. It integrates 128 KB of Flash program memory, 8 KB of RAM, and is AEC-Q100 qualified for harsh-environment embedded control. The 16-bit modified Harvard architecture with DSP-oriented instruction set makes it suitable for repetitive high-speed control loops. Key features include 128 KB Flash (43K x 24), 8 KB SRAM, 40 MIPS CPU performance at 3.0-3.6 V operation, 100-pin TQFP (14x14 mm) package, and automotive AEC-Q100 qualification per the -E temperature grade designation. The device also integrates DMA, 12-bit ADC, multiple UART/SPI/I2C peripherals, and is pin-compatible with the dsPIC33F family, enabling migration to DSP capability when signal-processing needs grow. An MCU (microcontroller) is a single-chip computer that integrates CPU core, program memory, data memory, and programmable peripherals. The PIC24H belongs to the 16-bit MCU hypernym hierarchy: 16-bit MCU -> MCU -> embedded processor -> semiconductor. Compared to 8-bit MCUs, the 16-bit architecture enables wider data paths and DSP-style instructions that accelerate digital filter, PID, and motor-control algorithms without external math co-processors. The 40 MIPS rating means each instruction executes in one clock cycle at 40 MHz, giving deterministic loop timing suitable for hard-real-time control. Typical applications include industrial motor control (BLDC/PMSM field-oriented control), automotive body and powertrain ECUs, digital power conversion (SMPS), uninterruptible power supply controllers, and high-performance sensor-fusion front-ends. The automotive -E temperature grade supports deployment under the hood and in cabin-mounted ECUs where ambient temperatures reach +125C. When designing with this device, allocate PCB area for the 14x14 mm TQFP footprint and follow Microchip's recommended decoupling scheme: one 100 nF ceramic per VDD/VSS pair plus a bulk 10 uF tantalum. JTAG/ICSP programming requires dedicated RB6/RB7 pins reserved for in-circuit serial programming. Verify trace lengths for the external crystal if high-speed USB or CAN peripherals are enabled.

Cotización Contacto
PIC24HJ128GP210A-I/PF - 16-bit 40 MIPS MCU 128KB Flash TQFP-100 | Microchip
PIC24HJ128GP210A-I/PF

PIC24HJ128GP210A-I/PF - 16-bit 40 MIPS MCU 128KB Flash TQFP-100 | Microchip

The Microchip Technology PIC24HJ128GP210A-I/PF is a high-performance 16-bit microcontroller from the PIC24H family, delivering up to 40 MIPS of CPU throughput with 128KB (43K x 24) of on-chip Flash program memory and 8KB of SRAM. Housed in a 100-pin TQFP (14x14 mm) package, this industrial-temperature (-40C to +85C) part is designed for demanding embedded control applications that require deterministic 16-bit performance, on-chip analog, and abundant I/O. The PIC24H is a 16-bit modified Harvard microcontroller core, a category of MCU that pairs separate program and data buses with a rich peripheral set. Within the broader taxonomy, the PIC24H belongs to the digital signal controller (DSC) family and is pin-compatible with the dsPIC33F DSC devices, sharing the same instruction set and peripheral IP while offering fixed-point (vs. DSP) operation. Engineers select the PIC24H when their application needs deterministic interrupt latency and C-compiler-friendly architecture but does not require DSP multiply-accumulate throughput. Key features include 16-channel 10-bit/12-bit ADC (depending on speed grade), up to 85 general-purpose I/O pins, multiple UART/SPI/I2C peripherals, five 16-bit timers, an enhanced CAN module, motor-control PWM, and an integrated real-time clock. The 40 MIPS throughput at 3.3V operation and the high-priority interrupt controller with up to five external interrupt sources make this part suitable for hard-real-time control loops in motor drives and power conversion. Architecturally, the PIC24H uses a 16-bit data path with 24-bit instruction words, a 17 x 17-bit hardware multiplier, and a 40-bit barrel shifter, allowing single-cycle MAC-style operations on integer data. The wide 24-bit program word and dual-port SRAM enable deterministic fetch without wait states for most instructions, supporting the 40 MIPS headline figure and predictable interrupt response. Typical applications include industrial motor drives (BLDC, PMSM, ACIM), digital power conversion (SMPS, PFC), factory automation PLCs, sensor interfacing front-ends, and medical instrumentation. The 100-pin TQFP footprint provides ample I/O for parallel data acquisition and multi-axis PWM generation without external bus expanders. When designing with this part, allocate a 10 uF bulk plus 0.1 uF decoupling cap per VDD/AVDD pin pair and route the analog AVSS/VDD traces away from switching nodes. Use MPLAB X IDE with the XC16 compiler for development; programmers such as ICD 4 or PICkit 4 connect via the ICSP pins and JTAG boundary-scan is supported per the device family. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing a single source for engineers selecting the PIC24HJ128GP210A-I/PF for industrial 16-bit control designs.

Cotización Contacto
PIC24HJ128GP210A-I/PT - 16-bit 40 MIPS 128KB Flash MCU | Microchip
PIC24HJ128GP210A-I/PT

PIC24HJ128GP210A-I/PT - 16-bit 40 MIPS 128KB Flash MCU | Microchip

The Microchip Technology PIC24HJ128GP210A-I/PT is a 16-bit microcontroller from the PIC® 24H family, delivering 40 MIPS of CPU performance with 128 KB of Flash program memory and 8 KB of RAM, housed in a 100-pin TQFP (12x12 mm) package. It operates from a 3.0V to 3.6V supply and integrates a rich peripheral set including a 12-bit ADC, multiple UART/SPI/I2C interfaces, DMA, and motor-control PWM. A 16-bit microcontroller (MCU) is an embedded processor whose data path and registers are 16 bits wide, delivering roughly twice the arithmetic throughput of an 8-bit MCU while remaining significantly more cost-effective than 32-bit Cortex-M devices. Within the broader semiconductor taxonomy, MCUs sit under microcontrollers -> embedded processors -> semiconductors. The PIC24H family uses a modified Harvard architecture with separate program and data buses, accelerated by a 16-bit wide instruction word that most instructions execute in a single cycle, making 40 MIPS achievable at 40 MHz FOSC. Key features include 128 KB Flash (43K x 24 words), 8 KB RAM, a 16-channel 12-bit ADC with 500 ksps throughput, two UART modules, two SPI ports, an I2C module, and a 16-bit timer/capture/compare/PWM engine. The device also provides 8 KB of boot Flash for secure firmware updates and a DMA controller with 8 channels capable of moving data between peripherals and RAM without CPU intervention. Technically, the PIC24HJ128GP210A belongs to the PIC24HJXXXGPX06A/X08A/X10A sub-family, sharing pin compatibility with the dsPIC33F DSC family. The "A" silicon revision improves ADC performance and lowers power consumption compared to the original PIC24HJ128GP210. The integrated DMA plus 16-bit timer architecture makes it well suited to deterministic real-time control loops such as FOC motor control and multi-loop PID. Typical applications include industrial motor control (BLDC/PMSM drives), digital power conversion, sensor signal conditioning, and consumer appliances. The PIC24HJ128GP210A-I/PT is the -40C to +85C industrial-temperature variant in a TQFP-100 package, suitable for reflow soldering on standard SMT lines. When designing with this part, pay close attention to decoupling: place one 0.1 uF ceramic capacitor per VDD/AVDD pin and a 10 uF bulk capacitor near the MCU. Use the on-chip DMA for ADC-to-memory transfers to free CPU cycles and enable deterministic sampling at 500 ksps. This page combines distributor pricing from 11 sources, drop-in alternatives from the same PIC24H and dsPIC33F families, and practical design notes not found on the manufacturer datasheet front page.

Cotización Contacto
PIC24HJ128GP210AT-I/PT - 16-bit 40 MIPS 128KB Flash MCU | Microchip
PIC24HJ128GP210AT-I/PT

PIC24HJ128GP210AT-I/PT - 16-bit 40 MIPS 128KB Flash MCU | Microchip

The Microchip Technology PIC24HJ128GP210AT-I/PT is a 16-bit PIC24H microcontroller with a 40 MIPS CPU, 128 KB (43K x 24) on-chip Flash program memory, and a 100-pin TQFP (12x12 mm) tape-and-reel package rated for the industrial -40C to +85C temperature range. It belongs to the PIC24H family of high-performance 16-bit microcontrollers designed for applications requiring fast, repetitive computations plus deterministic control. The device integrates 16 KB RAM, an 8-channel DMA, dual 16-channel 10/12-bit ADCs (up to 1.1 Msps), three 16-bit timers and a 16-bit 100-pin general-purpose configuration. A microcontroller (MCU) is a single-chip computer containing a CPU core, non-volatile program memory (Flash), volatile data memory (SRAM), and a rich set of on-chip peripherals such as ADCs, timers, communication controllers, and GPIO. Within the semiconductor taxonomy, an MCU is classified as: microcontroller -> embedded processor -> integrated circuit -> semiconductor. The PIC24HJ128GP210A specifically uses Microchip's 16-bit modified Harvard architecture with a single-cycle 40 MHz core, which delivers 40 MIPS of deterministic throughput that maps to higher-level requirements such as digital signal control, motor commutation, and power conversion feedback loops. Key differentiating features include 128 KB self-programmable Flash with code protection, four UART modules, two SPI modules, two I2C modules, two CAN 2.0B modules, a 9-channel 16-bit PWM, and an Enhanced Parallel Master/Slave Port (EPMP). These peripherals match the typical bill-of-materials of industrial drives, automotive body controllers, and grid-tied power-conversion stages. Architecturally, the PIC24HJ128GP210A shares pin compatibility with the dsPIC33F Digital Signal Controller family, allowing field-upgrade from MCU-only to DSP class within the same PCB footprint. The CPU executes instructions in a single clock cycle, the on-chip oscillator supports 7.5 MHz internal FRC with PLL, and the device operates from 3.0 V to 3.6 V. Power-management features include Doze, Idle, Sleep and Deep Sleep modes for low-power duty-cycled applications. Typical applications include industrial motor control (BLDC, PMSM, AC induction), switch-mode power supplies with digital control, sensor data acquisition systems, automotive body and chassis ECUs, CAN-based industrial networking nodes, and consumer appliances with TFT HMI. The large 128 KB Flash enables full protocol stacks such as CANopen or J1939, plus application logic, to run from a single chip. A key design consideration is that the 'AT' suffix denotes tape-and-reel packaging and industrial temperature grade, while the family is pin-compatible with dsPIC33F devices, simplifying future migration to DSP-based control. Designers should reference Microchip application notes on dsPIC33/PIC24 peripheral libraries to accelerate bring-up. This page synthesizes XAIPART pricing tiers, Microchip cross-references, drop-in alternatives, and design notes not found in a single distributor listing.

Cotización Contacto
PIC24HJ128GP306-I/PT - 16-Bit 40 MIPS 128KB Flash MCU | Microchip
PIC24HJ128GP306-I/PT

PIC24HJ128GP306-I/PT - 16-Bit 40 MIPS 128KB Flash MCU | Microchip

The Microchip Technology PIC24HJ128GP306-I/PT is a 16-bit PIC24H general-purpose microcontroller delivering 40 MIPS (51.2 MHz core clock with 1:1.6 PLL ratio capable of 70 MIPS equivalent) from a 128 KB (43K x 24) Flash program memory in a 64-pin TQFP (10x10 mm) package. The part integrates 8 KB SRAM and operates across an industrial -40C to +85C temperature range, while the silicon itself supports 3.0V to 3.6V single-supply operation. A microcontroller (MCU) is a single-chip computer that combines a CPU core, program memory (Flash/ROM), working memory (RAM), and a rich set of peripherals (timers, ADC, communication controllers, GPIO). The PIC24H family uses a 16-bit modified Harvard RISC architecture with a 24-bit instruction word, occupying the mid-performance tier between Microchip's PIC24F and dsPIC33F/DSP families. Within the broader taxonomy, MCUs sit below microprocessors in capability but above bare logic ICs in integration, providing standalone programmability for embedded systems. Key features of the PIC24HJ128GP306-I/PT include up to 53 general-purpose I/O pins, a 16-channel 12-bit ADC with 500 ksps conversion rate, two UART modules, two SPI ports, two I2C ports, an ECAN 2.0B controller, and a Parallel Master Port (PMP). The 64-pin TQFP footprint exposes the full peripheral set, making this the largest pin-count variant in the GP306 sub-family. The PIC24HJ128GP306 uses a 5-stage pipeline with single-cycle multiplication and hardware divide, achieving 40 MIPS sustained throughput. Its peripherals are routed through a Peripheral Pin Select (PPS) mapping engine, allowing flexible assignment of digital functions to physical I/O pins without package redesign - a critical flexibility advantage over older fixed-pin PIC microcontrollers. Typical applications include industrial motor drives, power-conversion control loops, HVAC fan/pump controllers, building-automation nodes, automotive body and chassis ECUs, and CAN-connected sensor clusters where the on-chip ECAN 2.0B and 12-bit ADC simplify BOM and firmware development. When designing with this device, allocate sufficient PCB area for the 64-pin TQFP land pattern and follow Microchip's recommended decoupling scheme: a 10 uF bulk capacitor plus 0.1 uF ceramic per VDD/VSS pair. Firmware portability across the PIC24H/dsPIC33F families is a strong advantage for designers planning product variants. This page synthesizes distributor pricing, drop-in alternatives within the same 64-pin TQFP footprint, and practical design notes that complement the manufacturer datasheet. The 64-pin TQFP land pattern is shared across the entire PIC24HJ12xGP30x and PIC24HJ12xGP31x families, simplifying PCB reuse across product variants and firmware revisions.

Cotización Contacto
PIC24HJ128GP306A-E/MR - 16-bit 40MIPS 128KB Flash MCU | Microchip
PIC24HJ128GP306A-E/MR

PIC24HJ128GP306A-E/MR - 16-bit 40MIPS 128KB Flash MCU | Microchip

The Microchip Technology PIC24HJ128GP306A-E/MR is a 16-bit, 40 MIPS RISC microcontroller from the PIC24H family, featuring 128 KB Flash, 16 KB RAM, and a 64-pin VQFN (9x9 mm) package with exposed thermal pad, qualified to the AEC-Q100 automotive standard and rated for the extended -40 °C to +125 °C temperature range. Operating from 3.0 V to 3.6 V, it integrates 53 digital I/O lines, 16-channel 10/12-bit ADC, multiple UART/SPI/I2C peripherals, and a 16-bit timer/capture/compare engine suitable for high-speed closed-loop control. A 16-bit microcontroller is a single-chip computer whose data path, registers and ALU are 16 bits wide; PIC24H devices in particular use a modified Harvard architecture with a 24-bit instruction word and a 16-bit data path, sitting in the product hierarchy 8-bit MCU (PIC16/PIC18) -> 16-bit MCU (PIC24) -> 16-bit DSC (dsPIC33) -> 32-bit MCU (PIC32). The PIC24HJ128GP306A is pin-compatible with the dsPIC33F family and offers seamless migration paths to PIC24F, dsPIC30F and dsPIC33F devices, which simplifies both upward (more peripherals / DSP) and downward (lower power) migrations on the same PCB footprint. Key features include a 40 MIPS execution speed from a 40 MHz oscillator with PLL, hardware multiplier for single-cycle MAC operations, and an enhanced CAN 2.0B module for automotive networking. The 64-pin VQFN (MR) variant offers an exposed thermal pad for improved heat dissipation in space-constrained automotive modules and industrial drives. Code security via program memory write protection and a unique device ID support anti-cloning, while the built-in 16-bit PWM with up to 9 outputs simplifies three-phase motor control and digital power conversion. Typical applications include automotive body and chassis ECUs, BLDC/PMSM motor drives, industrial control PLCs, sensorless field-oriented motor control, and high-speed digital signal conditioning. The combination of CAN, ample RAM and 12-bit ADC sample-and-hold makes it a strong fit for mechatronic subsystems that must meet AEC-Q100 stress tests. When designing with this device, follow the datasheet recommended decoupling scheme (100 nF on each VDD/VSS pair plus a bulk 10 µF) and use the exposed pad as the primary ground and thermal path; this part is supplied only in tube packaging per the manufacturer designation (-E = extended temp, /MR = VQFN-64).

Cotización Contacto
PIC24HJ128GP306A-E/PT - 16-bit 40MIPS 128KB Flash MCU | Microchip
PIC24HJ128GP306A-E/PT

PIC24HJ128GP306A-E/PT - 16-bit 40MIPS 128KB Flash MCU | Microchip

The Microchip Technology PIC24HJ128GP306A-E/PT is a 16-bit RISC microcontroller from the PIC24H family, featuring 128 KB of Flash program memory and 16 KB of data RAM in a 64-pin TQFP (10x10 mm) package. It executes up to 40 MIPS at a 40 MHz CPU clock, providing high-performance deterministic control for embedded applications. What is a PIC24H microcontroller? The PIC24H is a 16-bit MCU family from Microchip Technology, positioned within the broader PIC24F/PIC24H/dsPIC33F product hierarchy as a high-performance general-purpose 16-bit controller. It uses a modified Harvard architecture with a 16-bit data path and 24-bit instruction word, sitting between the lower-cost PIC24F and the DSP-capable dsPIC33F families. It belongs to the wider category of microcontrollers (MCU) within the integrated circuits and embedded systems ecosystem. Key features of the PIC24HJ128GP306A-E/PT include 128 KB Flash, 16 KB RAM, 53 programmable I/O lines, multiple 16-bit timers, DMA channels for CPU-offloaded data movement, and communication peripherals such as UART, SPI, and I2C. The device operates from 3.0 V to 3.6 V, supports -40C to +125C automotive-grade temperature range, and includes 10-bit and 12-bit ADC modules for mixed-signal acquisition. The -E suffix designates the extended (-40C to +125C) temperature grade, and /PT designates the 64-pin TQFP package. The architecture uses a 5-stage pipeline with single-cycle multiply, enabling 40 MIPS throughput at 40 MHz. The PIC24H family shares a very high degree of pin compatibility with the dsPIC33F family, allowing easy migration when DSP extensions are required. The integrated DMA engine supports parallel data transfer between peripherals and memory without CPU intervention, freeing CPU cycles for control-loop and communication tasks. Typical applications include industrial control systems, motor control (with companion dsPIC33F for FOC), automotive body and chassis ECUs, building automation, sensor interfacing, and consumer embedded products that need more performance than 8-bit MCUs but do not require full DSP capability. The 64-pin TQFP package also suits hand-solderable prototypes and low-volume production. When designing with this part, pay attention to the 3.3 V supply requirement and decoupling near each VDD/VSS pair. Use the in-circuit serial programming (ICSP) interface for firmware updates, and verify the trace length on high-speed communication lines. This page synthesizes distributor pricing, drop-in alternatives from the PIC24H/dsPIC33F family, and practical design notes not found in the manufacturer datasheet. For applications needing identical pinout with extended DSP capability, the dsPIC33FJ128GP306A-E/PT is a drop-in upgrade. For different memory density in the same 64-pin TQFP, the PIC24HJ256GP306A-E/PT and PIC24HJ64GP306A-E/PT are direct alternatives. The PIC24HJ128GP306A-E/MR (64-pin QFN) is the same die in a smaller package for space-constrained designs.

Cotización Contacto
PIC24HJ128GP306A-I/MR - 40 MIPS 128KB Flash 16-bit MCU | Microchip
PIC24HJ128GP306A-I/MR

PIC24HJ128GP306A-I/MR - 40 MIPS 128KB Flash 16-bit MCU | Microchip

The Microchip PIC24HJ128GP306A-I/MR is a high-performance 16-bit microcontroller from the PIC24H family, delivering 40 MIPS at 40 MHz core clock, 128 KB of Flash program memory, and 16 KB of SRAM in a 64-pin QFN (MR) package with exposed thermal pad. It operates from 3.0 V to 3.6 V, targets general-purpose embedded control applications, and supports migration to the dsPIC33F signal-control family with which it shares pin compatibility. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and a rich set of peripherals such as timers, ADC modules, communication interfaces (UART, SPI, I2C), and general-purpose I/O. The PIC24H belongs to the 16-bit MCU hierarchy (16-bit CPU -> microcontroller -> embedded computing -> semiconductor), using a modified Harvard architecture with a 16-bit data path and 24-bit instruction word for efficient C compilation and signal-processing headroom. Key features include 16-channel 12-bit ADC with 500 ksps conversion, multiple UART/SPI/I2C interfaces, 8-byte instruction cache, 16-bit timers with Input Capture and Output Compare, and an integrated mTouch capacitive touch peripheral. The 128 KB Flash supports self-programming, and the 64-pin QFN package provides extensive I/O with low thermal resistance for industrial temperature grade (-40C to +85C) operation. Architecturally, the PIC24H uses a pipelined 16-bit core with a deterministic interrupt model and single-cycle multiply, enabling responsive real-time control loops. The peripheral set is mapped through a Peripheral Pin Select (PPS) that allows flexible remapping of digital functions to physical pins, simplifying PCB layout versus fixed-pin microcontrollers. Typical applications include industrial motor control, digital power conversion, sensor interfacing, building automation, point-of-sale terminals, and general-purpose embedded control where 16-bit arithmetic, USB-ready peripherals, and DSP-style signal handling are required. The PIC24H's pin compatibility with the dsPIC33F enables code reuse when DSP functionality is later needed. When designing with this device, plan oscillator and ICSP layout early because the PIC24HJ128GP306A requires dedicated PGECx/PGEDx pairs for in-circuit programming; any pair may be used, but both signals must share the same pair index. Brown-Out Reset and Watchdog Timer settings should be configured at the firmware level to match the application power profile. This page synthesizes distributor pricing, parametric specifications, drop-in alternatives, and PCB design notes not aggregated in the manufacturer datasheet or single distributor listings.

Cotización Contacto
PIC24HJ128GP306A-I/P - 16-bit 40MIPS 128KB Flash MCU | Microchip
PIC24HJ128GP306A-I/P

PIC24HJ128GP306A-I/P - 16-bit 40MIPS 128KB Flash MCU | Microchip

The Microchip Technology PIC24HJ128GP306A-I/P is a 16-bit PIC24H general-purpose microcontroller (MCU) with a 40 MIPS CPU core, 128 KB Flash program memory and 16 KB RAM, housed in a 64-pin TQFP package. It integrates a DMA engine, multiple UART/SPI/I2C peripherals, 12-bit ADC and JTAG boundary scan, targeting high-speed embedded control and DSP-adjacent applications. A 16-bit microcontroller (MCU) is a class of programmable logic device that combines a CPU, non-volatile program memory (Flash), volatile data memory (SRAM), and on-chip peripherals (ADC, timers, communication controllers) into a single IC. 16-bit MCUs occupy the middle ground between 8-bit MCUs (lower cost, lower performance) and 32-bit MCUs (higher performance, more code), offering 16-bit data paths, 24-bit instruction words, and deterministic interrupt response. The PIC24H family is Microchip's highest-performance 16-bit architecture, achieving 40 MIPS at 80 MHz internal clock and supporting DSP-like operations including bit-reversed addressing and fractional arithmetic. Devices in this family are pin-compatible with the dsPIC33F DSC family, allowing field migration when DSP capability becomes a system requirement. Key features of the PIC24HJ128GP306A-I/P include: 128 KB Flash organized as 43 K x 24 instruction words, 16 KB SRAM, 8 KB additional RAM variant (per family datasheet), up to 53 I/O pins, 16-channel 12-bit ADC with 500 ksps conversion rate, two UART modules, two SPI modules, two I2C modules, two CAN modules (per family datasheet), 9 16-bit timers, and 8 PWM outputs. The device operates from 3.0V to 3.6V supply and is available in industrial (-40C to +85C) and extended (-40C to +125C) temperature grades. The 64-pin TQFP package measures 10 mm x 10 mm with 0.5 mm lead pitch and supports surface-mount assembly. The PIC24H architecture uses a 5-stage pipeline, 24-bit instruction word with both 16-bit and 32-bit extensions, and a modified Harvard bus with separate program and data memory paths feeding the CPU via dedicated buses. The integrated DMA controller can move data between peripherals and memory without CPU intervention, freeing MIPS budget for application code. Code compatibility with the dsPIC33F family means that source code developed for the PIC24H can be recompiled unchanged for dsPIC33F when DSP instructions are needed, providing a clear upgrade path. Typical applications include industrial motor control (BLDC, PMSM, AC induction drives), digital power conversion (UPS, inverters), sensor signal conditioning, automotive body electronics, building automation (HVAC, lighting control), medical instrumentation, and consumer audio processing. The combination of DMA, CAN, and high-speed ADC makes this MCU particularly well-suited to multi-loop control systems where deterministic timing and low CPU overhead are required. When designing with the PIC24HJ128GP306A-I/P, note that 3.3V I/O is required - level shifters are needed to interface with 5V logic. The 64-pin TQFP footprint supports the PIC24HJXXXGPX06A/X08A/X10A pin-compatible family, providing scalable Flash/RAM/feature options without PCB rework. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
PIC24HJ128GP306AT-I/PT - 40 MIPS 128KB Flash 16-bit MCU | Microchip
PIC24HJ128GP306AT-I/PT

PIC24HJ128GP306AT-I/PT - 40 MIPS 128KB Flash 16-bit MCU | Microchip

The Microchip Technology PIC24HJ128GP306AT-I/PT is a 16-bit PIC24H general-purpose microcontroller running at up to 40 MIPS with 128 KB of Flash program memory (organized as 43K x 24 instruction words) and 16 KB of on-chip SRAM, housed in a 64-pin TQFP (10x10 mm) industrial-temperature grade package. The 'AT' suffix denotes tape-and-reel packaging and 'I' denotes the industrial -40C to +85C operating range, while the /PT suffix specifies the 64-pin TQFP package. A 16-bit microcontroller (MCU) is an integrated processor that fetches, decodes and executes 16-bit-wide instructions in a single cycle, offering higher code density, faster arithmetic and richer peripherals than 8-bit MCUs while remaining simpler and lower-power than 32-bit ARM Cortex-M parts. The PIC24H family sits in Microchip's 16-bit MCU portfolio between the PIC24F low-power line and the dsPIC33F DSP-enabled family, supporting seamless migration paths and pin compatibility with dsPIC30F devices. Key features of the PIC24HJ128GP306AT-I/PT include a 16-bit modified Harvard CPU core with single-cycle 16x16 MAC, dual 40 MHz oscillator pins with PLL (FOSC up to 80 MHz / 40 MIPS), 53 general-purpose I/O lines, two UART/USART modules, two SPI interfaces, two I2C buses, an IrDA/LINbus-capable UART, two CAN 2.0b controllers, an 8-channel 10/12-bit ADC, four 16-bit timers, and a 16-bit Parallel Master Port (PMP) for external memory or graphics interfaces. The architecture is based on a modified Harvard bus with separate 24-bit instruction and 16-bit data paths, an 8-deep hardware stack and 17x17-bit multiplier with DSP extensions, while the IC uses a low-power CMOS process supporting 3.0V to 3.6V VDD operation. Five low-power modes (Idle, Doze, Sleep, Deep Sleep and alternate clock switchover) make it suited for battery-aware designs. Typical applications include industrial motor control, sensor signal conditioning, CAN-bus node controllers, LIN master/slave nodes, building automation, graphical user interfaces, and portable instrumentation. The 64-pin TQFP and PMP peripheral also enable small TFT-LCD HMI systems. Designers should verify minimum and maximum VDD (3.0V to 3.6V), use 0.1 uF + 10 uF decoupling per VDD/AVDD pair, and follow the I/O source/sink current limits from the datasheet. The MPLAB X IDE plus XC16 compiler and the MPLAB ICD programmer/debugger cover firmware development and in-circuit debug. This page consolidates distributor pricing, pin-compatible same-family alternatives, and PCB-level design guidance not found in the standalone manufacturer datasheet, helping engineers select the right PIC24H variant faster.

Cotización Contacto
PIC24HJ128GP306T-I/PT - 16-Bit 40MIPS 128KB Flash MCU | Microchip
PIC24HJ128GP306T-I/PT

PIC24HJ128GP306T-I/PT - 16-Bit 40MIPS 128KB Flash MCU | Microchip

The Microchip Technology PIC24HJ128GP306T-I/PT is a high-performance 16-bit PIC microcontroller from the PIC24H family, featuring 128 KB of Flash program memory organized as 43K x 24 bits, 16 KB of RAM, and a 40 MIPS modified Harvard CPU core, all housed in a 64-pin TQFP (10x10 mm) package. The "T" suffix denotes tape-and-reel packaging and the "I/PT" code indicates the industrial temperature grade (-40C to +85C) and TQFP package. Operating from a 3.0V to 3.6V supply, this device is engineered for demanding embedded control applications requiring real-time DSP performance and rich peripheral integration. A 16-bit microcontroller is a single-chip computer whose data path, registers and ALU operate on 16-bit words, doubling the throughput of 8-bit architectures while remaining cheaper and easier to use than 32-bit devices. The PIC24H family is Microchip's high-performance 16-bit tier (PIC24F -> 16-bit PIC -> microcontroller -> MCU -> embedded computing), built on a modified Harvard architecture with separate instruction and data buses. Within the broader semiconductor taxonomy it sits under microcontrollers, which themselves belong to the embedded processing category of integrated circuits. Key features of the PIC24HJ128GP306T-I/PT include 53 general-purpose I/O pins, two UART/USART modules, two SPI interfaces, one I2C bus, and protocol support for IrDA and LINbus. On-chip peripherals include a 16-channel 10/12-bit ADC, multiple 16-bit timers, an input capture module, output compare, a real-time clock calendar, and a charge-time measurement unit (CTMU) for capacitive touch sensing. The device integrates a single-cycle hardware multiplier and a 16 x 16-bit MAC engine, enabling DSP-grade signal processing at full CPU clock. Technically, the PIC24HJ128GP306T uses a 16-bit modified Harvard core with a 2-stage pipeline, capable of 40 MIPS at 40 MHz from a 3.3V supply. The non-volatile memory consists of 128 KB Flash (endurance rated at a minimum of 1,000 erase/write cycles per the device family specification) and 16 KB SRAM, with 4 KB of EEPROM emulation area. The integrated DMA controller can move data between peripherals and memory without CPU intervention, and the parallel master port supports external bus expansion for larger memory-mapped peripherals. Typical applications include industrial motor control (BLDC, PMSM, ACIM), digital power conversion (digital PFC, LLC and phase-shift converters), advanced sensor fusion, medical patient monitors, building automation controllers, automotive body and infotainment subsystems, and graphics-capable HMI panels. The combination of DSP performance, ample headroom for protocol stacks, and rich analog peripherals makes the PIC24HJ128GP306T a strong fit for these use cases. When designing with this part, note that the 64-pin TQFP footprint supports both GP306 (USB-less) and GP310/GP206 variants in the same land pattern, easing migration within the PIC24H family. Be sure to observe Flash endurance limits during development and use the ICSP interface with a PGECx/PGEDx pair to avoid premature wear of the program memory. This page synthesizes distributor pricing, drop-in package-compatible alternatives and practical design notes not found on a single manufacturer page, providing a faster engineering reference.

Cotización Contacto
PIC24HJ128GP310-I/PT - 16-bit 40MIPS 128KB Flash MCU | Microchip
PIC24HJ128GP310-I/PT

PIC24HJ128GP310-I/PT - 16-bit 40MIPS 128KB Flash MCU | Microchip

The Microchip Technology PIC24HJ128GP310-I/PT is a high-performance 16-bit PIC24H microcontroller featuring a 40 MIPS CPU core, 128 KB of Flash program memory (43K x 24) and 8 KB of SRAM, integrated into a 100-pin TQFP (12x12 mm) industrial-grade package rated for the -40C to +85C temperature range. The device operates from a single 3.0 V to 3.6 V supply, includes 85 general-purpose I/O pins, eight output compare/PWM channels, two UART, two SPI, one I2C, and one quadrature encoder interface for motor control feedback, plus a 16-channel 10/12-bit ADC capable of up to 500 ksps conversions. An on-chip 40 MHz internal RC oscillator and PLL simplify clock design, and dual PGECx/PGEDx pairs enable robust in-circuit serial programming via Microchip's ICSP interface. The 'GP310 variant specifically targets general-purpose designs that do not require CAN or USB, while the 'GP510 sibling adds a CAN module and the 'FJ series migrates users toward lower-power 3.3 V families. The PIC24HJ128GP310 belongs to a 16-bit MCU family that provides a deterministic architectural sweet spot between 8-bit PIC16/PIC18 controllers and 32-bit ARM Cortex parts. 16-bit MCUs like this combine a modified Harvard core, a rich peripheral set, and DSP-friendly features (single-cycle MAC on the dsPIC33 derivatives) while staying within a familiar programming model. This positioning makes them a cost-effective solution for mid-range embedded control where 8-bit performance is insufficient but the BOM cost and toolchain overhead of a 32-bit MCU is not yet justified. The 'GP310 family is pin-compatible with several PIC24F and dsPIC33F devices, allowing easy migration as application requirements evolve. The integrated 16-channel 12-bit ADC, multiple timers, PWM outputs, and quadrature encoder interface make the PIC24HJ128GP310-I/PT well suited to motor control, industrial automation, digital power conversion, and sensor-fusion embedded designs. A 32 kHz secondary oscillator and ultra-low-power wake-up sources allow the device to support sleep/idle modes for battery-friendly applications when active processing is not required. The active-high MCLR reset, JTAG/ICSP programming ports, and dedicated trace pins provide field-upgradeable firmware paths that are common in deployed industrial and consumer products. When designing with this part, ensure all VDD/VSS pin pairs are decoupled with 100 nF ceramic capacitors placed within 5 mm of the package, and route PGECx/PGEDx lines as a matched pair to avoid programming failures. The wide 85 I/O count and TQFP-100 land pattern leave room for PCB-side debug headers and signal-breakout test points without expanding the board outline. This page synthesizes current distributor pricing, Microchip drop-in alternatives, and practical layout guidance not consolidated on the manufacturer datasheet cover page.

Cotización Contacto
PIC24HJ128GP310A-E/PF - 16-bit 40MIPS MCU 128KB Flash | Microchip
PIC24HJ128GP310A-E/PF

PIC24HJ128GP310A-E/PF - 16-bit 40MIPS MCU 128KB Flash | Microchip

The Microchip Technology PIC24HJ128GP310A-E/PF is a 16-bit microcontroller from the PIC24H family, delivering 40 MIPS performance at 40 MHz, integrating 128 KB of Flash program memory and 16 KB of SRAM in a 100-pin TQFP (14x14 mm) package rated for the -40C to +125C automotive temperature range. The device is AEC-Q100 qualified, making it suitable for safety-relevant automotive ECUs and harsh-environment industrial control systems where extended temperature operation is mandatory. Its 16-bit modified Harvard architecture with single-cycle MAC and 32-bit accumulators supports high-speed DSP-oriented signal processing tasks in real time. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory, working RAM, and a rich set of peripherals (timers, ADC, communication controllers, GPIO) into a single chip. MCUs sit at the lowest tier of the embedded computing hierarchy - below microprocessors (MPUs) and SoCs - and are typically used for deterministic, real-time control loops in motor control, sensor interfacing, and human-machine interfaces. The PIC24H family belongs to the 16-bit MCU segment, positioned above 8-bit PIC16/PIC18 devices but below 32-bit PIC32/ARM Cortex-M families, offering a balance of deterministic interrupt latency, code density, and arithmetic headroom for control-oriented applications. Key features of the PIC24HJ128GP310A-E/PF include up to 85 I/O pins, two 3-wire SPI modules, two I2C modules, two UART modules, two CAN modules (ECAN), a 12-bit A/D converter with up to 32 input channels, multiple 16-bit timers, an enhanced parallel master/slave port (PMP/PSP), and a real-time clock/calendar. The 16 KB SRAM supports ample data buffering for communication stacks and DSP scratchpad operations, while the 128 KB Flash accommodates application code plus bootloader and OTA update partitions. Integrated DMA reduces CPU load by autonomously moving data between peripherals and memory. Architecturally, the PIC24HJ128GP310A-E/PF uses a 16-bit modified Harvard core with separate program and data buses and a 24-bit instruction word, enabling single-cycle fetch and a unified 16-MB linear code/data address space. The -A silicon revision improves ADC performance and lowers dynamic power relative to the original PIC24HJ128GP310. The device shares a footprint with the dsPIC33F family, simplifying migration when customers require DSP extensions. Typical applications include automotive body and chassis ECUs, industrial motor control, uninterruptible power supply (UPS) controllers, building automation gateways, and medical instrumentation front-ends. The wide operating voltage range (3.0 V to 3.6 V) and extended temperature rating also make it appropriate for outdoor industrial gateways and heavy-equipment controllers. When designing with this MCU, allocate decoupling capacitance close to every VDD/VSS pair and follow Microchip's TQFP-100 land pattern recommendations. Use Microchip's MPLAB X IDE, XC16 compiler, and MPLAB Code Configurator (MCC) for peripheral initialization. For migration paths, verify pinout against the dsPIC33FJ128GP310A-E/PF if DSP extensions become necessary. This page consolidates distributor pricing, drop-in alternative MPNs, application notes, and design considerations beyond the manufacturer datasheet, offering a one-stop engineering and procurement reference.

Cotización Contacto
PIC24HJ128GP310A-E/PT - 16-bit 40MIPS MCU 128KB Flash TQFP-100 | Microchip
PIC24HJ128GP310A-E/PT

PIC24HJ128GP310A-E/PT - 16-bit 40MIPS MCU 128KB Flash TQFP-100 | Microchip

The Microchip PIC24HJ128GP310A-E/PT is a 16-bit PIC24H microcontroller delivering 40 MIPS performance from a 40 MHz oscillator, with 128 KB on-chip Flash and 16 KB SRAM, packaged in a 100-pin TQFP (12x12 mm) with industrial-grade -40C to +125C operating range. It integrates a 16-bit architecture, DMA controller, 12-bit ADC, multiple UART/SPI/I2C peripherals, and is pin-compatible with the dsPIC33F family for migration to DSP-capable devices. A 16-bit microcontroller (MCU) is an embedded processor whose arithmetic logic unit, registers, and data bus are 16 bits wide, enabling it to handle larger operands and richer instruction sets than 8-bit MCUs while consuming less power and costing less than 32-bit Cortex-M parts. The PIC24H sits in Microchip's hierarchy as a 16-bit MCU -> general-purpose MCU -> embedded microcontroller -> semiconductor IC, designed for high-speed repetitive computation and real-time control. Key features include 128 KB Flash (43K x 24 words), 16 KB RAM, 8 KB instruction cache, two UART modules, two SPI modules, two I2C modules, a 16-channel 10/12-bit ADC with 500 ksps conversion, a 6-channel DMA controller, and a 16-bit timer/counter block with 5 capture/compare/PWM channels. The /E temperature suffix denotes the extended -40C to +125C industrial range. The PIC24H core uses a 16-bit RISC architecture with a 24-bit instruction word and 16-bit data path. It executes most instructions in one cycle, the DMA controller moves data between peripherals and RAM without CPU intervention, and the integrated 10-bit ADC can be upgraded to 12-bit via the ADC1 configuration register. Boundary scan (JTAG) is supported for in-circuit test. Typical applications include industrial motor control, sensor signal conditioning, multi-protocol communication bridges, and high-performance sensor hubs in industrial automation systems. The wide peripheral set also suits medical patient monitoring, building automation controllers, and energy metering. When designing with this device, ensure your compiler is the latest MPLAB XC16 version for C99-compliant code generation, and use the device's DMA channels to offload repetitive data movement from the CPU. The pin-compatible dsPIC33F migration path lets you add DSP capability on the same PCB later. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes that go beyond the bare datasheet to help procurement and firmware engineers evaluate the PIC24HJ128GP310A-E/PT quickly.

Cotización Contacto
PIC24HJ128GP310A-I/PT - 16-bit 40 MIPS 128KB Flash MCU | Microchip
PIC24HJ128GP310A-I/PT

PIC24HJ128GP310A-I/PT - 16-bit 40 MIPS 128KB Flash MCU | Microchip

The Microchip Technology PIC24HJ128GP310A-I/PT is a 16-bit microcontroller from the PIC24H family, executing up to 40 MIPS from a maximum 40 MHz CPU clock, packaged in a 100-pin TQFP (12x12x1 mm). It integrates 128 KB (43K x 24 instructions) of flash program memory and 16 KB of SRAM on-chip, and operates across an industrial temperature range of -40C to +85C with a 3.3V core supply. A 16-bit microcontroller (MCU) is an embedded processor with a 16-bit-wide datapath, register file, ALU and instruction word, positioned between 8-bit MCUs and 32-bit ARM Cortex-M parts in the embedded hierarchy. The PIC24H sits above 8-bit PIC16/PIC18 parts and below 32-bit PIC32 MCUs within Microchip's portfolio, targeting deterministic real-time control with C-friendly compiler support, hardware DSP-like multiply, and rich motor-control peripherals. Key features include 8-channel DMA, a 16-bit timer/counter engine, up to 8 PWM outputs with dedicated time bases, 10/12-bit ADC options (one A/D converter shared across multiple channels), two UART, two SPI, two I2C, one 16-bit parallel master port, and boundary-scan (JTAG) for in-circuit test. The modified Harvard architecture with separate program and data paths gives deterministic interrupt latency under 10 cycles, critical for power conversion and motor control loops. The 100-pin TQFP device is pin-compatible with the dsPIC33F DSC family, providing a seamless migration path from fixed-point MCU to full DSP when applications evolve to require MAC-intensive routines. Internal phase-locked loop multiplies an external 8 MHz crystal to the full 40 MHz system clock. Typical applications include industrial motor control (BLDC, PMSM and ACIM drives), digital power conversion (PFC + LLC controllers), factory automation PLCs, sensor signal conditioning and medical instrumentation front-ends. The wide peripheral mix suits multi-loop PID control with high update rates. When designing with this device, allocate the dedicated DMA channels carefully - misassignment between ADC and PWM can starve high-priority transfers. A 10 uF bulk plus 0.1 uF decoupling capacitor per power pin is the minimum recommendation. This page synthesizes distributor pricing, verified drop-in alternatives within the PIC24H/dsPIC33F family, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto
PIC24HJ128GP310AT-I/PT - 16-Bit 40MIPS MCU 128KB Flash | Microchip
PIC24HJ128GP310AT-I/PT

PIC24HJ128GP310AT-I/PT - 16-Bit 40MIPS MCU 128KB Flash | Microchip

The Microchip PIC24HJ128GP310AT-I/PT is a high-performance 16-bit microcontroller from the PIC24H family, featuring a 40 MIPS CPU core, 128 KB of program Flash, 16 KB of RAM, and a 100-pin TQFP (12x12 mm) package rated for the industrial temperature range (-40C to +85C). It integrates a 16-channel 10/12-bit ADC, multiple UART/SPI/I2C peripherals, and Motor Control PWM, targeting real-time control and DSP-adjacent embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash for program storage, SRAM for data), and programmable peripherals on one die. The PIC24H is a 16-bit RISC architecture (modified Harvard) with DSP-oriented instructions - placed in the hierarchy MCU -> 16-bit MCU -> PIC24H family -> high-performance control DSP. It is pin-compatible with the dsPIC33F family and migrates seamlessly from PIC24F devices, giving designers a clear upgrade path. Key features include a 40 MHz system clock (10 MIPS/MHz pipelined CPU), 128 KB Flash with self-programmability, 16 KB RAM, 4 KB auxiliary Flash for EEPROM emulation, and 85 dedicated I/O. The device runs from 3.0V to 3.6V and provides rich connectivity: 4 UART, 3 SPI, 2 I2C, 8 16-bit timers, a 6-channel Motor Control PWM, and a 16-channel 12-bit ADC with 500 ksps throughput. Architecturally, the PIC24HJ128GP310A uses a 16-bit wide datapath, hardware multiplier (17x17 in one cycle), zero-overhead looping, and a deterministic interrupt controller. These traits enable single-cycle MAC operations and tight real-time response - making it suitable for closed-loop control such as BLDC motor commutation or digital power conversion where DSP-grade math is needed but a full DSP is overkill. Typical applications include industrial motor control (BLDC, PMSM, ACIM drives), digital power conversion (PFC, LLC, full-bridge converters), industrial sensor acquisition, and embedded control for factory automation. The wide peripheral set also supports HVAC, home appliances, and consumer audio processing. When designing with this part, ensure decoupling follows the manufacturer reference layout: 100 nF ceramic on every VDD/VSS pair plus a 10 uF bulk. Leave Vcap (core regulator bypass) with a 10 uF low-ESR capacitor. For multi-layer boards, flood unused layers under the device with ground pour to assist thermal dissipation. This page synthesizes distributor pricing, pin-compatible PIC24H alternatives, and design notes not aggregated on any single source - including selection guidance between the I/E (industrial/extended) temperature grades and the equivalent -I/PF 100-TQFP pinout.

Cotización Contacto
PIC24HJ128GP310T-I/PF - 16-bit 40MIPS 128KB Flash MCU | Microchip
PIC24HJ128GP310T-I/PF

PIC24HJ128GP310T-I/PF - 16-bit 40MIPS 128KB Flash MCU | Microchip

The Microchip Technology PIC24HJ128GP310T-I/PF is a high-performance 16-bit PIC microcontroller belonging to the PIC24H family, featuring a 40 MIPS modified Harvard architecture core and 128KB (43K x 24) of Flash program memory in a 100-pin TQFP (14x14 mm) package. Operating from a 3.0V to 3.6V supply, it integrates 16KB SRAM and a rich peripheral set including DMA controllers, PWM, UART, SPI, I2C, ADC, and a watchdog timer. The 'T' suffix denotes tape-and-reel packaging, and the 'I' suffix indicates the industrial -40C to +85C operating temperature range. A 16-bit microcontroller (MCU) is a programmable integrated circuit that combines a 16-bit CPU core, volatile RAM, non-volatile Flash memory, and on-chip peripherals into a single silicon die. Within the broader microcontroller taxonomy, the PIC24HJ128GP310 belongs to the PIC24H 'High-Performance' family, which sits between the PIC24F (low-power) and dsPIC33F (DSP-enhanced) families. It executes instructions at up to 40 MIPS (million instructions per second) using a modified Harvard architecture with separate program and data buses, enabling deterministic single-cycle execution. Key differentiating features include hardware DMA with up to 8 channels, 16-bit timers/capture/compare, a 12-bit ADC with 500 ksps throughput, USB 2.0 full-speed OTG, CAN 2.0B, and JTAG ICD debugging. The 128KB Flash supports 10,000 erase/write cycles typical, and the integrated 16KB RAM allows substantial data buffering. Compared with 8-bit PIC16/18 parts, the 16-bit core delivers 4-10x higher MIPS density for DSP-like signal processing in embedded control applications. Typical applications include industrial motor control (BLDC, PMSM, stepper), uninterruptible power supply (UPS) controllers, power-conversion feedback loops, medical instrumentation with USB or CAN connectivity, automotive body and chassis ECUs (non-safety), and consumer audio processing. The peripheral mix is particularly suited to real-time control loops where deterministic interrupt latency and DMA offload are required. When designing with this device, ensure the Vcap pin (pin 86 on TQFP-100) is connected to a 10 uF ceramic decoupling capacitor, as the internal core regulator requires external capacitance. Designers migrating to dsPIC33F for DSP gain code compatibility, or to PIC24F for lower power, should consult Microchip migration guides; the PIC24HJ family bridges both worlds. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, plus a parametric comparison against PIC24H and PIC24F siblings.

Cotización Contacto
PIC24HJ128GP310T-I/PT - 16-Bit 40 MIPS 128KB Flash MCU | Microchip
PIC24HJ128GP310T-I/PT

PIC24HJ128GP310T-I/PT - 16-Bit 40 MIPS 128KB Flash MCU | Microchip

The Microchip Technology PIC24HJ128GP310T-I/PT is a 16-bit, 40 MIPS high-performance microcontroller from the PIC24H family, featuring 128 KB (43K x 24) of FLASH program memory and 16 KB of RAM in a 100-pin TQFP (PT) package with 12x12 mm body. It is built on a wide 16-bit modified-Harvard architecture with a 24-bit instruction word, supported by a 16-channel, 10/12-bit ADC and on-chip peripherals such as I2C, SPI, UART/USART, IrDA and LINbus. What is a 16-bit microcontroller? A 16-bit microcontroller is a programmable processor core with a 16-bit data path that delivers a step up from 8-bit MCUs in arithmetic throughput, addressing range and on-chip peripheral integration while remaining more cost-effective than 32-bit Cortex-M devices. Within Microchip's portfolio, the PIC24H family sits between the PIC24F (low-power) and dsPIC33F (DSP-enabled) families, inheriting the same instruction set, peripheral library and pin-out compatibility, which makes it a workhorse for real-time control and DSP-adjacent signal processing tasks. Key specifications include operation from 3.0 V to 3.6 V (typical 3.3 V), 40 MIPS sustained throughput at up to 40 MHz system clock, and a wide peripheral set: 5 timer/counter modules, 16 input-capture/compare/PWM channels, a 16-channel 10-bit ADC at 500 ksps (12-bit option available in this family), two UART modules with IrDA, two SPI and one I2C bus, plus a Parallel Master Port. The device provides up to 85 digital I/O pins and supports 5 V tolerant digital inputs on most pins, simplifying mixed-voltage designs. Typical applications include industrial motor control (BLDC/PMSM sensorless and sensored drives), digital power conversion (SMPS, PFC, LLC), advanced sensor processing (multi-axis IMU fusion, encoder interfaces), automotive body and HVAC modules, and general-purpose embedded control with DSP-like math such as real-time audio processing and lighting control. The combination of 128 KB FLASH, 16 KB RAM and the rich peripheral set makes it suitable for mid-complexity applications where RAM headroom and 16-bit MAC throughput matter. When designing with the PIC24HJ128GP310T-I/PT, the supply rail must be tightly regulated at 3.0 to 3.6 V because most I/O are not 5 V tolerant. Decoupling bulk capacitance close to the VDD/AVDD pair and a clean analog AVSS reference for the ADC are essential. Watchdog, brown-out reset and a JTAG/ICSP programming/debug interface are provided, enabling in-field firmware updates. This page synthesizes current distributor pricing, drop-in compatible alternatives from the same PIC24H family, and practical design notes not consolidated in the manufacturer datasheet.

Cotización Contacto