Microcontroladores

Productos (18733)

PIC24HJ128GP502-H/MM - 16-bit 40 MIPS 128KB Flash MCU | Microchip
PIC24HJ128GP502-H/MM

PIC24HJ128GP502-H/MM - 16-bit 40 MIPS 128KB Flash MCU | Microchip

The Microchip Technology PIC24HJ128GP502-H/MM is a 16-bit microcontroller from the PIC24H family, delivering 40 MIPS performance with 128 KB (43K x 24) of Flash program memory in a 28-pin QFN-S (6x6 mm) package with exposed pad. The -H suffix denotes an operating temperature range of -40C to +150C and AEC-Q100 automotive qualification, making this part suitable for harsh-environment and automotive under-hood applications. A 16-bit microcontroller (MCU) is an integrated circuit combining a CPU, memory, and peripherals on a single die, designed for embedded control tasks. Within Microchip's taxonomy this part sits under: microcontroller -> 16-bit MCU -> PIC24 family -> PIC24H subfamily -> dsPIC33F-pin-compatible digital signal controller class. PIC24H devices share a powerful 16-bit modified Harvard architecture ideal for high-speed, repetitive computations and real-time control, and are pin-compatible with the dsPIC33F family to allow code migration between DSP and pure-control variants. Key features of the PIC24HJ128GP502-H/MM include 128 KB Flash, 8 KB RAM, 16 KB auxiliary Flash for data EEPROM emulation, two 16-bit timers, two 32-bit timers, two UART, two SPI, two I2C, an input capture module, an output compare module, a 16-channel 10-bit ADC, a 10/12-bit PWM module, and a real-time clock calendar (RTCC). The high-temperature automotive grade combined with the compact 28-pin QFN footprint makes it an excellent fit where PCB area is constrained but thermal robustness is mandatory. Internally the device uses a modified Harvard architecture with a 16-bit data path and 24-bit instruction word, allowing atomic access to wide data types and single-cycle multiply, which is critical for closed-loop control loops. The 128 KB Flash supports self-programming via ICSP, enabling robust in-field firmware updates. Typical applications include automotive body and chassis ECUs, sensor fusion nodes, industrial HVAC controllers, appliance motor control, and battery management systems (BMS) where AEC-Q100 qualification is required. Compared with the PIC24FJ equivalent, the PIC24H offers higher MIPS and stronger analog performance at the cost of slightly higher active power. When designing with this part, ensure the exposed pad on the QFN is soldered to a sufficiently large copper pour to meet the -40C to +150C thermal rating under worst-case load. Use ICSP for production programming and reserve one of the PGECx/PGEDx pairs for in-circuit debug access without disturbing the application code. This page synthesizes distributor pricing, drop-in same-family alternatives, automotive-grade selection guidance, and practical PCB thermal notes that go beyond the manufacturer datasheet.

Cotización Contacto
PIC24HJ128GP502-I/SO - 16-bit 40MIPS 128KB Flash MCU | Microchip
PIC24HJ128GP502-I/SO

PIC24HJ128GP502-I/SO - 16-bit 40MIPS 128KB Flash MCU | Microchip

The Microchip PIC24HJ128GP502-I/SO is a 16-bit microcontroller from the PIC24H family, featuring a 40 MIPS modified Harvard architecture, 128 KB of Flash program memory, 8 KB of SRAM, and a 28-pin SOIC (SO) package. It operates at 3.0V to 3.6V and delivers up to 40 MIPS performance, targeting high-speed control loops and DSP-adjacent signal processing. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, working RAM, and a rich set of peripherals. The PIC24H sits in Microchip's 16-bit MCU taxonomy as a high-performance general-purpose controller, bridging the gap between 8-bit PIC16/PIC18 parts and 32-bit PIC32 devices. Within the broader power-management-and-control hierarchy, the PIC24H functions as the deterministic embedded controller for motor control, power conversion, and sensor-fusion applications. Key features include 128 KB Flash (43K x 24 words), 8 KB SRAM, an enhanced 16-bit CPU with single-cycle multiply, a 12-bit ADC up to 1.1 Msps, two analog comparators, two UART/SPI/I2C modules, one CAN module, five 16-bit timers, and a Parallel Master Port (PMP). The 28-SOIC package is the 300-mil wide body, supporting hand-soldering and standard reflow profiles. Architecturally, the PIC24HJ128GP502 uses a modified Harvard core with separate program and data buses, allowing simultaneous instruction fetch and data access. The 40 MIPS throughput derives from a 10 MHz internal oscillator with 4x PLL multiplication and the zero-overhead hardware DO/REPEAT loop engine, which delivers deterministic interrupt latency critical for closed-loop control. Typical applications include industrial motor control (BLDC, PMSM, and stepper drives), digital power conversion (SMPS, PFC), sensor interfacing and conditioning, automotive body and chassis subsystems, and general-purpose embedded control in factory automation. The integrated CAN module is particularly relevant for industrial networking. When designing, ensure decoupling follows Microchip's typical application note guidance: a 100 nF ceramic on each VDD/VSS pair within 5 mm, plus a bulk 10 uF tantalum or ceramic near the regulator. The 28-SOIC package has a thermal resistance (theta_JA) in the ~50-65 C/W range, so at full 40 MIPS the chip still dissipates only tens of mW and requires no heatsink. This page synthesizes distributor pricing, drop-in PIC24H same-family alternatives, and practical design considerations not found in the bare manufacturer datasheet, giving engineers a one-stop reference for sourcing and qualification.

Cotización Contacto
PIC24HJ128GP502-I/SP - 16-bit 40 MIPS 128KB Flash MCU | Microchip
PIC24HJ128GP502-I/SP

PIC24HJ128GP502-I/SP - 16-bit 40 MIPS 128KB Flash MCU | Microchip

The Microchip Technology PIC24HJ128GP502-I/SP is a 16-bit microcontroller from the PIC24H family, delivering 40 MIPS performance with 128 KB Flash and 8 KB SRAM in a 28-pin SPDIP (SP) package. It operates from 3.0 V to 3.6 V, integrates 21 I/O pins, and runs at up to 40 MIPS instruction throughput at 3.3 V. A 16-bit microcontroller (MCU) is a programmable processor that executes 16-bit instructions in a single cycle, bridging the gap between 8-bit MCUs and 32-bit ARM Cortex parts. The PIC24H sits in the PIC24 -> 16-bit MCU -> microcontroller -> embedded processor hierarchy and is widely used in motor control, digital power conversion, and high-speed sensor interfacing. Compared with 8-bit PIC16/18 families, PIC24H doubles code density and quadruples computational throughput for DSP-style math. Key features of the PIC24HJ128GP502 include 128 KB Flash (43K x 24 words), 8 KB SRAM, CRC engine, up to 10-bit ADC sampling at 500 ksps, multiple UART/SPI/I2C peripherals, and 21 general-purpose I/O pins. The architecture is pin-compatible with the dsPIC33F DSC family, allowing designers to migrate from MCU to DSP without PCB changes. It supports up to 16-channel DMA, reducing CPU load in data-intensive applications. Technically, the PIC24HJ128GP502 uses a modified Harvard architecture with separate program/data buses, hardware multiply, and zero-overhead hardware loops. The core executes most instructions in one cycle, and the 16-bit-wide program path enables compact C code generation. An integrated 10-bit ADC with dual sample-and-hold supports simultaneous voltage and current sensing in motor-control loops. Typical applications include brushless DC (BLDC) motor control, sensorless field-oriented control (FOC), industrial automation, UPS and digital power, LED lighting drivers, and medical instrumentation. Its DMA engine makes it well suited to multi-loop control where deterministic timing matters. When designing with the PIC24HJ128GP502, ensure decoupling capacitors (100 nF plus 10 µF bulk) are placed close to VDD/VSS pairs and that the ADC reference pin (VREF+/VREF-) is bypassed with low-ESR ceramic. The I-grade part supports -40 °C to +85 °C industrial operation. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto
PIC24HJ128GP502T-I/MM - 16-bit 40MIPS 128KB Flash MCU | Microchip
PIC24HJ128GP502T-I/MM

PIC24HJ128GP502T-I/MM - 16-bit 40MIPS 128KB Flash MCU | Microchip

The Microchip Technology PIC24HJ128GP502T-I/MM is a 16-bit PIC24H microcontroller delivering 40 MIPS performance with 128 KB (43K x 24) of Flash program memory and 8 KB of SRAM, packaged in a compact 28-pin QFN-S (6x6 mm) format with tape-and-reel delivery. The part suffix '-T-' designates Tape and Reel packaging, '-I' indicates the -40C to +85C industrial operating range, and '/MM' identifies the 6x6 mm QFN-S package. A 16-bit microcontroller (MCU) is a programmable system-on-chip that combines a CPU core, Flash program memory, SRAM data memory, and a rich set of peripherals (ADC, timers, communication interfaces) into a single integrated circuit. The PIC24H family sits within the broader microcontroller taxonomy as follows: 16-bit MCU -> PIC24H family -> Microchip dsPIC/PIC24 architecture -> embedded controller -> semiconductor. This hierarchy positions the PIC24HJ128GP502 as a mid-range MCU balancing computational throughput with peripheral integration. Key features of the PIC24HJ128GP502T-I/MM include a 40 MIPS CPU core, 16-channel 10/12-bit ADC, multiple communication interfaces (UART, SPI, I2C), 21 I/O pins, and on-chip 16-bit timers. The wide 3.0V to 3.6V operating voltage supports typical 3.3V embedded designs, while the integrated peripherals reduce external component count and BOM cost. The PIC24HJ128GP502 family architecture employs a Harvard-bus modified RISC core with hardware multiply/divide, hardware loop support, and DSP-oriented instructions. Devices in this family are pin compatible with the dsPIC33F series, enabling firmware migration between signal-processing and general-control variants without PCB rework. Typical applications for this MCU include industrial motor control (sensorless BLDC, stepper drives), digital power conversion (digital PFC, LLC converters), advanced sensor signal conditioning, automotive body and comfort modules, and portable medical instrumentation. The wide industrial temperature range and high computational throughput make it especially suitable for closed-loop control loops running at PWM rates above 100 kHz. When designing with the PIC24HJ128GP502T-I/MM, ensure the QFN exposed pad is soldered to a sufficiently large ground copper pour to meet the package thermal resistance (theta-JA of approximately 41 C/W). The device requires an external 3.3V LDO regulator and a low-ESR decoupling capacitor bank of 100 nF + 10 uF near the VDD pins. Programming is supported via ICSP (In-Circuit Serial Programming) over PGECx/PGEDx pins. This page synthesizes distributor pricing, drop-in alternatives drawn from the PIC24H and PIC24F families, and practical design notes not consolidated on the manufacturer product page.

Cotización Contacto
PIC24HJ128GP502T-I/SO - 16-bit 40MIPS 128KB Flash MCU | Microchip
PIC24HJ128GP502T-I/SO

PIC24HJ128GP502T-I/SO - 16-bit 40MIPS 128KB Flash MCU | Microchip

The Microchip Technology PIC24HJ128GP502T-I/SO is a 16-bit microcontroller from the PIC24H family, delivering 40 MIPS performance at up to 40 MHz with 128 KB (43K x 24) of Flash program memory and 8 KB of SRAM, all in a 28-pin SOIC wide-body package. It integrates a 10-channel 10-bit/12-bit Analog-to-Digital Converter, supports CAN, I2C, IrDA, LIN, PMP, SPI, and UART connectivity, and operates from a 3.0 V to 3.6 V supply across the industrial -40 C to +85 C temperature range. What is a 16-bit MCU? A 16-bit microcontroller (MCU) is a single-chip computer with a 16-bit data path, register width, and ALU, sitting between 8-bit MCUs (lower cost, simpler control tasks) and 32-bit MCUs (higher performance, more memory). The PIC24H family uses Microchip's enhanced 16-bit modified Harvard architecture with a 24-bit instruction word, placing it in the broader taxonomy: microcontroller -> embedded processor -> semiconductor device. These MCUs target deterministic real-time control where 8-bit devices lack throughput and 32-bit devices over-spend on cost and power. Key features include a hardware multiplier for single-cycle 16x16 MAC operations, a 16-channel DMA controller, up to 21 I/O pins, four 16-bit timers/counters, and an internal oscillator. The 24-bit instruction path and 16-bit data path allow compact, high-code-density programs while still providing enough headroom for DSP-style signal processing at 40 MIPS. The CAN 2.0B peripheral makes the part attractive for industrial and automotive networks. Architecturally, the PIC24HJ128GP502 combines a 5-stage pipeline, deterministic interrupt latency, and bit-manipulation instructions. The part is pin-compatible with the dsPIC33F family, enabling code reuse for designs that may migrate to DSP-class signal processing. Code execution reaches 40 MIPS from a 40 MHz FRC or crystal oscillator source, while peripheral flexibility allows flexible timer/capture/PWM configurations. Typical applications include industrial control systems, sensor signal conditioning, motor control (BLDC/PMSM with external FET drivers), building automation, HVAC controllers, automotive body electronics, and medical instrumentation. The integrated CAN peripheral is especially useful in CAN-enabled sensor clusters and distributed I/O. Designers should pay close attention to the 3.3 V supply constraint and the need for proper decoupling near the AVDD/AVSS pins to achieve the 12-bit ADC performance. The wide-body SOIC footprint allows easy hand-soldering and rework during prototyping, while the T/R suffix on this variant indicates tape-and-reel packaging for SMT assembly lines. This page synthesizes real-time distributor stock and pricing, parametric drop-in alternatives drawn from the same PIC24H family and cross-brand equivalents, and practical PCB-layout and ADC design notes that complement the manufacturer datasheet.

Cotización Contacto
PIC24HJ128GP504-E/ML - 16-bit 40 MIPS MCU 128KB Flash | Microchip
PIC24HJ128GP504-E/ML

PIC24HJ128GP504-E/ML - 16-bit 40 MIPS MCU 128KB Flash | Microchip

The Microchip PIC24HJ128GP504-E/ML is a high-performance 16-bit microcontroller from the PIC24H family, delivering 40 MIPS at 3.3V and integrating 128 KB of Flash program memory with 8 KB of SRAM in a 44-pin QFN (8x8 mm) package with exposed thermal pad. The 'E' suffix designates the -40C to +125C extended industrial temperature grade, and the 'ML' suffix denotes the QFN-44 surface-mount package. According to the manufacturer datasheet (DS70175-family), the device operates from 3.0V to 3.6V and supports a wide peripheral set including up to 13 channels of 12-bit ADC, multiple UART/SPI/I2C interfaces, and hardware PWM. A 16-bit microcontroller (MCU) is an embedded processor with a 16-bit data path, register width, and ALU, designed to outperform 8-bit architectures in DSP-style arithmetic while remaining easier to program than 32-bit cores. The PIC24H sits in the middle of Microchip's 16-bit portfolio (above PIC24F, below dsPIC33) and is pin-compatible with the dsPIC33F family, sharing a high degree of compatibility with dsPIC30F devices for migration flexibility. Key features include a modified Harvard architecture with a 16-bit data path and 24-bit instruction words, single-cycle MAC, hardware multiply/divide, a 16-channel 12-bit 500 ksps ADC with on-chip references, up to 5 16-bit timers, two UART modules, two SPI, one I2C, and an RTCC. The 44-pin QFN package is optimized for compact designs and supports up to 35 digital I/O pins with individual peripheral remapping. The device includes a JTAG boundary scan and ICSP programming interface, plus an integrated watchdog timer and multiple power-saving modes (Idle, Sleep, and Deep Sleep). Typical applications include industrial motor control, digital power conversion, advanced sensor interfacing, medical instrumentation, automotive body controllers, and consumer audio processing. The 40 MIPS performance, combined with DSP-friendly instructions, makes it suitable for closed-loop control loops and audio sample-rate processing. With 128 KB Flash and 8 KB RAM, the device comfortably supports protocol stacks (Modbus, CAN in some variants), real-time control firmware, and graphical LCD drivers. When designing with this device, note that the QFN-44 exposed pad MUST be soldered to the PCB ground plane for thermal dissipation and electrical performance. Decoupling capacitors (100 nF and 10 uF) should be placed as close to the VDD pins as possible, and the analog supply (AVDD) should be filtered separately from VDD for ADC accuracy.

Cotización Contacto
PIC24HJ128GP504-E/PT - 16-bit 40 MIPS MCU 128KB Flash | Microchip
PIC24HJ128GP504-E/PT

PIC24HJ128GP504-E/PT - 16-bit 40 MIPS MCU 128KB Flash | Microchip

The Microchip PIC24HJ128GP504-E/PT is a 16-bit microcontroller from the PIC24H family, featuring a 40 MIPS CPU core, 128 KB of Flash program memory, 8 KB of SRAM, and a 12-bit ADC with up to 13 analog input channels. It comes in a 44-pin TQFP (10x10 mm) package with an industrial-grade -40C to +125C operating temperature range (the "E" suffix) and is qualified to AEC-Q100 standards for automotive applications. The device is part of the PIC24H family and is pin compatible with the dsPIC33F family of devices. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and peripheral interfaces (ADC, timers, communication ports) onto one silicon die. 16-bit MCUs like the PIC24H occupy the middle ground between 8-bit controllers (e.g., PIC16, ATmega) and 32-bit ARM Cortex-M devices, offering a balance of deterministic real-time performance, richer arithmetic, and code density for motor control, power conversion, and signal-processing applications. The PIC24H belongs to the broader taxonomy: 16-bit MCU -> MCU -> embedded processor -> semiconductor IC. Key features of the PIC24HJ128GP504-E/PT include: 128 KB (43K x 24) Flash, 8 KB SRAM, 40 MIPS performance from a 40 MHz system clock, 13-channel 12-bit ADC, 8-channel DMA, multiple UART/SPI/I2C interfaces, JTAG boundary scan, and an operating voltage range of 3.0V to 3.6V. The 16-bit modified Harvard architecture allows single-cycle MAC operations, accelerating DSP-style algorithms. The device uses a 16-bit modified Harvard architecture with separate program and data buses, enabling simultaneous instruction fetch and data access. Its 40 MIPS throughput supports demanding control loops, while the 8-channel DMA engine offloads data movement between peripherals and RAM, freeing the CPU for computational tasks. The AEC-Q100 qualification extends the operating temperature range to +125C and ensures reliability under automotive stress conditions. Typical applications include BLDC and PMSM motor control (compressor, pump, fan), automotive body and chassis ECUs, digital power conversion (SMPS, PFC), industrial control loops, and sensor signal processing. The combination of 16-bit DSP throughput, automotive qualification, and PIC24H family pin compatibility with dsPIC33F makes it well suited for high-reliability embedded designs. A key design consideration is voltage supply: this MCU requires a 3.0V to 3.6V rail, and an external LDO or switching regulator is typically used to derive it from a 5V or 12V bus. Decoupling should follow Microchip's recommended layout guidelines, with 100 nF capacitors placed close to each VDD/VSS pair and a bulk capacitor at the supply input. This page synthesizes distributor pricing, pin-compatible same-family alternatives, and practical design notes beyond what is found in the manufacturer datasheet alone, supporting both engineering selection and procurement decisions.

Cotización Contacto
PIC24HJ128GP504-H/ML - 16-bit 40MIPS MCU 128KB Flash 44-QFN | Microchip
PIC24HJ128GP504-H/ML

PIC24HJ128GP504-H/ML - 16-bit 40MIPS MCU 128KB Flash 44-QFN | Microchip

The Microchip Technology PIC24HJ128GP504-H/ML is a 16-bit PIC24H microcontroller delivering up to 40 MIPS performance at 3.3V from a 128 KB Flash program memory and 8 KB SRAM, housed in a 44-pin QFN (8x8 mm) exposed-pad package. It is part of the PIC24HJ128GPX02/X04 family of 16-bit microcontrollers with advanced analog peripherals, and is pin-compatible with the dsPIC33F family, allowing design portability between control-only and DSP-capable firmware. A 16-bit microcontroller (MCU) is a microprocessor optimized for embedded control with a 16-bit data path, native peripherals (ADC, timers, UART, SPI, I2C), and deterministic real-time interrupt handling. Microcontrollers sit within the broader hierarchy of microprocessors -> microcontrollers -> 16-bit MCU -> PIC24H family -> Power Management and Embedded Control. The 16-bit architecture provides a balance between 8-bit MCU simplicity and 32-bit performance, ideal for applications that need higher code density and math precision than 8-bit parts can offer without paying the cost of an MPU. Key features include a 16-bit modified Harvard architecture with single-cycle 16x16 multiplier, dual 40-bit accumulators (dsPIC compatible), 21 to 35 general-purpose I/O, an on-chip 12-bit A/D converter with up to 13 channels, multiple UART/SPI/I2C peripherals, and a wide operating voltage of 3.0V to 3.6V. The -H suffix designates the high-temperature automotive grade with operation from -40C to +150C, qualifying it for AEC-Q100 harsh-environment deployments. Technical depth: the PIC24HJ core runs at 40 MHz (10 MIPS/MHz) and includes a 16-element register file, hardware multiply/divide, and a deterministic interrupt controller with 5-cycle latency. The 44-QFN exposed pad (EP) lowers thermal resistance for higher-power applications by providing a direct heat path to the PCB. Typical applications include automotive body and chassis control, industrial motor control, sensor signal conditioning, LED lighting controllers, and consumer appliances. The wide I/O count and analog integration make it a strong fit for mixed-signal embedded designs. Design tip: the 44-QFN exposed pad must be soldered to a thermal land on the PCB with adequate thermal vias to meet the JEDEC EIA/JESD51 standard for junction-to-ambient thermal resistance; floating the EP causes device overheating and reliability failure. This page synthesizes distributor pricing, drop-in alternatives, application notes, and design guidance not found in the bare manufacturer datasheet.

Cotización Contacto
PIC24HJ128GP504-H/PT - 16-bit 20MIPS 128KB Flash MCU | Microchip
PIC24HJ128GP504-H/PT

PIC24HJ128GP504-H/PT - 16-bit 20MIPS 128KB Flash MCU | Microchip

The Microchip Technology PIC24HJ128GP504-H/PT is a 16-bit microcontroller from the PIC24H family, delivering 20 MIPS performance with 128 KB Flash and 8 KB SRAM in a 44-pin TQFP (10x10) package. The "-H" suffix denotes the High-temperature variant rated for -40C to +150C operation, while "PT" identifies the TQFP-44 package. It is built on a modified Harvard architecture with a 16-bit datapath and 24-bit instructions, providing excellent code density and deterministic interrupt latency for embedded control. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals onto one die. Within the embedded-system taxonomy, the PIC24HJ128GP504 sits in the 16-bit MCU tier - a step above 8-bit MCUs in arithmetic throughput but below 32-bit Cortex-M devices in raw performance. It belongs to the PIC24H sub-family, which is pin-compatible with the dsPIC33F DSP-capable siblings, giving designers an upgrade path to DSP without board changes. Key features include 128 KB (43K x 24) self-programmable Flash, 8 KB SRAM, a 12-bit A/D converter with up to 13 input channels, two UART modules, two SPI modules, and a 16-bit timer/capture/compare/PWM block. The device operates from 3.0V to 3.6V and integrates a 4x PLL for flexible clocking from external crystals or oscillators. An on-chip DMA controller with 8 channels offloads data movement from the CPU, accelerating throughput for sensor arrays and communication stacks. Architecturally, the PIC24HJ128GP504 uses a 16-bit wide datapath with 24-bit instruction words, enabling single-cycle MAC operations on 16-bit data. The 5-stage pipeline and hardware multiply/divide unit deliver up to 20 MIPS at 40 MHz FOSC, while deterministic interrupt response (5-cycle latency) simplifies real-time control loops. The advanced analog block integrates sample-and-hold plus simultaneous sampling, supporting motor-control and power-conversion applications. Typical applications include industrial motor control (BLDC, PMSM, ACIM), sensor signal conditioning, digital power conversion, automotive body and chassis ECUs, and high-temperature downhole or under-hood instrumentation. The 150C rating makes it suitable for harsh-environment telemetry. The wide peripheral integration reduces external component count, shrinking BOM cost in volume production. When designing with this MCU, leverage the DMA controller to keep the CPU free for control loops and use the peripheral trigger mechanism for deterministic ADC sampling. For new designs, evaluate the -H temperature grade carefully - it is more expensive than the -I grade and may have longer lead times, so design prototypes with the -I variant and qualify the -H version for production. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto
PIC24HJ128GP504-I/PT - 16-bit MCU 128KB Flash 40MIPS | Microchip
PIC24HJ128GP504-I/PT

PIC24HJ128GP504-I/PT - 16-bit MCU 128KB Flash 40MIPS | Microchip

The Microchip PIC24HJ128GP504-I/PT is a 16-bit microcontroller from the PIC24H family, featuring a 40 MIPS CPU core, 128 KB of Flash program memory, 8 KB of RAM, and a 44-pin TQFP package (10x10 mm). It operates from 3.0V to 3.6V and is industrial-grade rated from -40C to +85C, supporting 16-bit DSP instructions for high-speed numeric processing in embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and programmable I/O peripherals into one IC. The PIC24H family uses a 16-bit modified Harvard RISC architecture with 24-bit instructions, optimized for code density and deterministic real-time control. Within Microchip's portfolio, PIC24H sits between the 8-bit PIC18 family and the 32-bit PIC32MX/dsPIC33E families, delivering high-performance 16-bit DSP capability for motor control, digital power, and audio processing applications. The PIC24HJ128GP504 integrates 128 KB Flash (43K x 24 words), 8 KB SRAM, 4 KB EEPROM emulation in Flash, two UART/SPI/I2C modules, two CAN modules, an Enhanced 16-bit Parallel Master Port, a 12-bit ADC with up to 13 input channels and 500 ksps conversion rate, and a 16-bit timer/capture/compare/PWM module set. The device is pin-compatible with the dsPIC33F family, allowing migration to a DSP-enhanced core without PCB changes. Architecturally, the PIC24HJ128GP504 uses a 2-stage pipeline with a hardware multiplier and 16x16-bit single-cycle MAC, enabling efficient fixed-point DSP operations. Its DMA controller supports memory-to-peripheral transfers without CPU intervention, and its Peripheral Pin Select (PPS) feature allows flexible remapping of digital peripherals to I/O pins - a significant advantage over PIC24F parts that lack this capability. Typical applications include industrial motor control (BLDC, PMSM, stepper), digital power conversion (PFC, LLC, full-bridge converters), automotive body and sensor interfaces, medical instrumentation, and high-reliability industrial automation. The combination of CAN, UART, SPI, I2C, and 12-bit ADC peripherals makes the part well suited as a system supervisor in distributed embedded networks. When designing with the PIC24HJ128GP504, ensure the 3.3V supply rail is well decoupled with at least 10uF + 100nF local capacitance, and that any analog reference for the 12-bit ADC uses a low-noise LDO such as the MCP1700. Programming and debugging should use Microchip's MPLAB X IDE with a PICkit 4 or ICD 4 in-circuit debugger. This page synthesizes distributor pricing, drop-in alternatives from Microchip's PIC24H family, and practical design notes not found in the manufacturer datasheet alone, helping engineers evaluate drop-in replacement and migration options for long-lifecycle designs.

Cotización Contacto
PIC24HJ128GP504T-I/ML - 16-bit 40MIPS 128KB Flash MCU | Microchip
PIC24HJ128GP504T-I/ML

PIC24HJ128GP504T-I/ML - 16-bit 40MIPS 128KB Flash MCU | Microchip

The Microchip Technology PIC24HJ128GP504T-I/ML is a high-performance 16-bit PIC24H microcontroller featuring a 40 MIPS CPU core, 128 KB (43K x 24) of Flash program memory and 8 KB of SRAM, housed in a 44-pin QFN (8x8 mm) package with an exposed thermal pad. The device operates from 3.0V to 3.6V (industrial range 3.0V-3.6V; 5V-tolerant I/O on selected pins per datasheet) and supports a -40C to +85C industrial temperature range. A microcontroller (MCU) is a single-chip computer containing a CPU core, non-volatile program memory, volatile data memory, and a rich set of on-chip peripherals such as timers, ADC, communication controllers and I/O. The PIC24H family sits in Microchip's 16-bit dsPIC/PIC24 portfolio between the 8-bit PIC10/12/16 and the 32-bit PIC32MX families, offering higher throughput than 8-bit parts while remaining simpler and lower-power than 32-bit devices. Hypernym hierarchy: PIC24HJ128GP504 -> PIC24H family -> 16-bit PIC -> PIC microcontroller -> microcontroller (MCU) -> embedded processor -> semiconductor. Key features include a 16-channel 10/12-bit ADC (depending on variant configuration), multiple UART/SPI/I2C peripherals, 5 16-bit timers, a 16-bit PWM with up to 9 output channels, and the Parallel Master Port for external bus interfacing. The CPU executes most instructions in a single cycle and the modified Harvard architecture delivers deterministic interrupt latency. The device is pin-compatible with the dsPIC33F family, allowing designers to migrate designs between digital signal control and pure microcontroller functionality without PCB rework. According to Microchip's PIC24HJ128GP504 datasheet, the part also integrates a 4-channel DMA controller that moves data between peripherals and RAM without CPU intervention, freeing MIPS for application code. Typical applications include industrial control (motor drives, sensor conditioning, smart sensors), digital power conversion, automotive body and chassis ECUs, medical instrumentation, LED lighting controllers, and consumer audio processing. The 40 MIPS throughput is well matched to closed-loop control loops sampled at 1-100 kHz. When designing with the PIC24HJ128GP504T-I/ML, the engineer should pay attention to decoupling capacitor placement near the VCAP pin, ensure JTAG/ICSP traces are kept short for in-circuit programming, and verify that the chosen oscillator configuration matches the system's EMI budget. The 'T' suffix denotes Tape and Reel packaging; the '-I' denotes the industrial temperature grade. This page synthesizes verified distributor pricing, drop-in alternatives within the same 44-QFN footprint, and practical design notes not found in the manufacturer datasheet - providing engineering decision support beyond the raw datasheet.

Cotización Contacto
PIC24HJ128GP504T-I/PT - 16-bit 40MIPS 128KB Flash MCU TQFP-44 | Microchip
PIC24HJ128GP504T-I/PT

PIC24HJ128GP504T-I/PT - 16-bit 40MIPS 128KB Flash MCU TQFP-44 | Microchip

The Microchip Technology PIC24HJ128GP504T-I/PT is a 16-bit microcontroller from the PIC24H family, delivering up to 40 MIPS at 3.3V, integrating 128 KB (43K x 24) of Flash program memory and 8 KB of SRAM in a 44-pin TQFP (10x10 mm) package. The "T" suffix indicates tape-and-reel packaging, while the "I" denotes the -40C to +85C industrial temperature range, and "/PT" specifies the TQFP-44 package. A PIC microcontroller is a compact integrated circuit containing a processor core, program memory, data memory, and a rich set of peripherals. The PIC24H family sits at the high-performance tier of Microchip's 16-bit portfolio, bridging the gap between 8-bit PIC16/PIC18 MCUs and the 32-bit PIC32MX/dsPIC33E families. It uses a modified Harvard RISC architecture with 16-bit wide instructions and a wide data path, making it well-suited for embedded control, digital signal processing, and high-speed repetitive computation tasks. Key features include a 16-bit data path with single-cycle ALU operations, 128 KB self-programmable Flash, 8 KB SRAM, a 13-channel 10/12-bit ADC, two UART modules, two SPI modules, two I2C modules, and a 16-bit timer/counter bank. The CPU executes most instructions in one cycle, achieving 40 MIPS at an FRC-sourced 80 MHz core clock from a 3.0V to 3.6V supply. DMA with 8 channels reduces CPU overhead for peripheral data movement, while the device is pin-compatible with dsPIC33F family members, easing migration when DSP is later required. Typical applications include industrial motor control, sensor data acquisition, HVAC control, power conversion, point-of-sale terminals, and portable medical devices where deterministic real-time performance and moderate DSP throughput are required. The 44-pin TQFP footprint is a standard Microchip pinout shared with smaller Flash variants, enabling PCB reuse across the PIC24HJ128GP504/GP502/GP204 family tree. Designers should plan for a 3.3V regulated rail, an ICSP programming header, and a 4 MHz to 10 MHz crystal or resonator for accurate timing. Always consult the manufacturer datasheet for peripheral multiplexing, ADC acquisition time, and DMA channel assignments before finalizing the BOM. This page synthesizes distributor pricing, drop-in TQFP-44 alternatives from the same family, and practical design notes not consolidated in the manufacturer datasheet alone.

Cotización Contacto
PIC24HJ128GP506-I/PT - 16-bit 40 MIPS 128KB Flash MCU | Microchip
PIC24HJ128GP506-I/PT

PIC24HJ128GP506-I/PT - 16-bit 40 MIPS 128KB Flash MCU | Microchip

The Microchip PIC24HJ128GP506-I/PT is a high-performance 16-bit microcontroller from the PIC24H family, delivering up to 40 MIPS at 3.3V and offering 128 KB of Flash program memory with 8 KB of SRAM. It integrates a 10-bit ADC with up to 18 input channels, two UART, two SPI, two I2C and a CAN interface, packaged in a 64-pin TQFP (10x10 mm) suitable for industrial temperature grade -40C to +85C operation. A 16-bit microcontroller is an MCU whose internal data path, registers, and ALU are 16 bits wide, allowing single-instruction word addressing of up to 64 KB of data and significantly higher code density than 8-bit cores. The PIC24H family sits in the hierarchy: 16-bit MCU -> dsPIC/PIC24 family -> Microchip MCU portfolio -> embedded microcontrollers -> semiconductors. These parts are designed for applications where 8-bit performance is insufficient but full 32-bit complexity is not required, such as motor control, power conversion, and sensor processing. The PIC24HJ128GP506 offers up to 53 programmable I/O pins, five 16-bit timers, and a peripheral set that includes a CAN 2.0B controller, dual UART modules with IrDA support, dual SPI ports, and dual I2C channels. The 64-pin TQFP provides ample analog and digital I/O for typical embedded designs. The device operates from 3.0V to 3.6V and includes a programmable PLL that multiplies the external oscillator to the required system clock. Architecturally, the PIC24HJ128GP506 uses a modified Harvard architecture with a 24-bit instruction word, allowing most instructions to execute in a single cycle. Its DMA-free interrupt controller provides 5-cycle latency for prioritized interrupts, and a 16-channel DMA engine (on select variants) reduces CPU load for data movement tasks. The CAN module supports CAN 2.0B active with bit rates up to 1 Mbaud, making the device suited for automotive sub-network and industrial field-bus nodes. Typical applications include industrial motor control (BLDC, PMSM, stepper), solar inverter control loops, automotive CAN nodes, building automation gateways, and medical instrumentation front-ends. The combination of 128 KB Flash and CAN makes this part especially attractive for CAN-based sensor hubs and mid-tier automotive body controllers. Engineers often pair it with MCP2551 CAN transceivers and MCP1700 LDO regulators in 3.3V power trees. When designing with this device, reserve adequate decoupling (100 nF per VDD pin plus bulk 10 uF tantalum), keep ADC traces short and away from switching nodes, and route the CAN differential pair as a 100-ohm impedance matched pair. JTAG/ICSP programming requires specific pin assignments and a 4.7 kohm pull-up on MCLR. This page synthesizes distributor pricing, drop-in same-package alternatives, and design considerations not consolidated in the manufacturer datasheet.

Cotización Contacto
PIC24HJ128GP506A-E/MR - 16-bit 40MIPS MCU 128KB Flash | Microchip
PIC24HJ128GP506A-E/MR

PIC24HJ128GP506A-E/MR - 16-bit 40MIPS MCU 128KB Flash | Microchip

The Microchip Technology PIC24HJ128GP506A-E/MR is a 16-bit PIC24H RISC microcontroller with 128KB of Flash program memory, 40 MIPS CPU performance, and AEC-Q100 automotive qualification, housed in a 64-pin VQFN (9x9 mm) package with exposed pad. It is a member of the high-performance PIC24H family designed for applications relying on high-speed repetitive computations and digital control. A 16-bit microcontroller (MCU) is an embedded computing device that executes instructions from a 16-bit-wide data path, providing a balance of deterministic real-time control and computational throughput. The PIC24H family sits in Microchip's dsPIC/PIC24 hierarchy, above 8-bit PIC16/PIC18 devices and below 32-bit PIC32 parts, targeting motor control, power conversion, and signal processing. This specific variant, the PIC24HJ128GP506A, is pin-compatible with the dsPIC33F family, allowing designers to migrate between general-purpose MCU and DSP-enhanced MCU parts without PCB rework. Key features of the PIC24HJ128GP506A-E/MR include 128KB (43K x 24) of self-programmable Flash with ECC, up to 8KB of RAM, two 16-bit timers, an 8-channel 10/12-bit ADC, multiple UART/SPI/I2C peripherals, and a 40 MHz maximum operating frequency at 3.3V. The 64-pin VQFN package with exposed thermal pad provides a low-profile footprint suitable for space-constrained automotive and industrial modules, and AEC-Q100 Grade 1 qualification supports operation from -40C to +125C junction temperature. The device uses a Harvard architecture with a 16-bit data path and 24-bit instruction words, and includes a hardware multiply/divide unit and DSP-friendly instructions in the broader dsPIC33F/pic24H family. Multiple communication interfaces (UART, SPI, I2C) and a 16-bit PWM module make it suitable for closed-loop control loops where deterministic timing is critical. Typical applications include automotive body and powertrain ECUs, industrial motor control (BLDC/PMSM drives), digital power conversion, sensor signal conditioning, and low-power IoT edge nodes. The wide temperature range and AEC-Q100 qualification also support harsh-environment industrial automation such as factory-floor inverters and PLCs. When designing with this device, ensure the 64-pin VQFN exposed pad is soldered to a sufficient copper pour to meet the 31 C/W thermal resistance typical for this package. Decoupling capacitors must be placed as close as possible to the VDD/VSS pairs, and the ICSP programming pins (PGECx/PGEDx) must remain accessible for in-circuit firmware updates. This page synthesizes distributor pricing, AEC-Q100-qualified drop-in alternatives, and practical design notes not found in the manufacturer datasheet summary.

Cotización Contacto
PIC24HJ128GP506A-E/PT - 40 MIPS 16-Bit MCU, 128KB Flash | Microchip
PIC24HJ128GP506A-E/PT

PIC24HJ128GP506A-E/PT - 40 MIPS 16-Bit MCU, 128KB Flash | Microchip

The Microchip Technology PIC24HJ128GP506A-E/PT is a 16-bit PIC24H microcontroller with 128KB (43K x 24) of Flash program memory, 40 MIPS CPU performance at 3.3V, and 53 general-purpose I/O lines in a 64-pin TQFP (10x10) package with -40C to +125C automotive-grade temperature range. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (SRAM), and peripheral interfaces on one die. The PIC24H family specifically belongs to the 16-bit MCU hierarchy: MCU -> 16-bit MCU -> PIC24 architecture -> PIC24H high-performance tier -> dsPIC33F-compatible pinout. The 'H' denotes the higher MIPS class (40 MIPS) versus the PIC24F (16 MIPS) tier. Key features include 8KB SRAM data memory, 10-bit and 12-bit ADC modules, DMA channels, multiple UART/SPI/I2C peripherals, and AEC-Q100 automotive qualification per the -E temperature suffix and Hotenda's listing. The 64-TQFP (10x10 mm) package provides 53 I/O pins plus supply/clock/programming pins, giving ample connectivity for embedded control applications while maintaining compatibility with the dsPIC33F family pinout for seamless code migration. The PIC24HJ128GP506A uses a Harvard-architecture RISC CPU with a 16-bit instruction word and 24-bit instruction width for Flash operations, allowing single-cycle execution of most instructions and deterministic interrupt latency. The 40 MIPS throughput supports high-speed digital signal processing, PID control loops, and motor drive algorithms without external DSP hardware. Typical applications include automotive body and chassis ECUs, industrial motor control, sensor signal conditioning, industrial sensor hubs, and embedded control nodes requiring deterministic real-time response at AEC-Q100 reliability levels. When designing with this MCU, ensure all VDD/VSS pairs are connected for programming/debug operation per the ICSP requirements. Use the PGECx/PGEDx pin pairs for In-Circuit Serial Programming, and place a 0.1uF decoupling capacitor near each VDD pin. This page synthesizes distributor pricing, AEC-Q100 cross-references, and design notes not aggregated in the manufacturer datasheet alone.

Cotización Contacto
PIC24HJ128GP506A-H/MR - 16-bit 20MIPS 128KB Flash MCU | Microchip
PIC24HJ128GP506A-H/MR

PIC24HJ128GP506A-H/MR - 16-bit 20MIPS 128KB Flash MCU | Microchip

The Microchip Technology PIC24HJ128GP506A-H/MR is a 16-bit PIC24H microcontroller with 128 KB of Flash program memory and an 8 KB SRAM data space, delivering up to 20 MIPS throughput from a 40 MHz internal oscillator in a 64-pin VQFN (9x9 mm) package. According to the DigiKey listing, this device is rated for the AEC-Q100 automotive temperature range of -40C to +150C, making it suitable for under-hood and harsh-environment deployments. A 16-bit microcontroller (MCU) is a microprocessor with a 16-bit data path, registers, and ALU, sitting in the hierarchy: microcontroller -> embedded MCU -> semiconductor -> integrated circuit. The PIC24H family uses a 16-bit modified Harvard architecture with separate program and data buses, enabling single-cycle instruction fetch plus single-cycle data access. Within Microchip's portfolio the PIC24H bridges the PIC24F (low-power) and dsPIC33F (DSP) families, offering higher MIPS than PIC24F and lower cost than dsPIC33F. Key features of the PIC24HJ128GP506A-H/MR include a 12-bit ADC with up to 18 channels and 500 ksps conversion rate, two UART modules, two SPI modules, and two I2C modules. The 64-pin VQFN package exposes five 16-bit timer/counter modules, four input capture and four output compare/PWM channels, and a real-time clock-calendar with separate 32 kHz oscillator pins. The peripheral set is oriented toward closed-loop motor and power-conversion control where the 20 MIPS core can execute a single PID iteration every 50 ns. The architecture is built around a 16-bit register file and a hardware multiply unit that produces a 32-bit result in a single cycle, doubling effective DSP throughput compared with PIC24F devices. A 16-word deep shadow register bank enables fast interrupt response, and the on-chip 128 KB Flash supports self-programming under firmware control for in-field firmware updates - a critical feature for automotive ECU designs. Typical applications include BLDC/PMSM motor control, industrial sensor conditioning with on-chip ADC, automotive body and chassis modules, and consumer appliances. The AEC-Q100 grade allows direct deployment in cabin electronics and selected under-hood subsystems where ambient temperatures regularly cross 125 C. A primary design consideration is power budgeting: at 40 MHz the core draws approximately 30 mA from a 3.3 V supply. Designers should budget 100 mA headroom when the ADC, timers, and I/O banks all operate simultaneously, and ensure the QFN thermal pad is soldered to a continuous ground copper pour of at least 1 square inch. This page synthesizes Microchip datasheet parameters, AEC-Q100 qualification evidence, distributor pricing, drop-in alternatives, and practical design notes not aggregated on a single manufacturer or distributor page.

Cotización Contacto
PIC24HJ128GP506A-H/PT - 16-bit 20 MIPS 128KB Flash MCU | Microchip
PIC24HJ128GP506A-H/PT

PIC24HJ128GP506A-H/PT - 16-bit 20 MIPS 128KB Flash MCU | Microchip

The Microchip Technology PIC24HJ128GP506A-H/PT is a 16-bit PIC24H microcontroller IC operating at 20 MIPS with 128 KB (43K x 24) of Flash program memory and 8 KB of RAM, packaged in a 64-pin TQFP (10x10 mm). It targets automotive-grade embedded applications and is rated across a -40C to +150C junction temperature range, qualifying it under the AEC-Q100 automotive reliability standard. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and peripheral interfaces such as ADC, PWM, UART, and I/O pins. The PIC24H family is positioned in the hierarchy: 16-bit MCU -> dsPIC/PIC24 architecture -> Microchip MCU portfolio -> embedded microcontroller class. The "H" designation denotes high-performance variants within the PIC24 line, sharing pin compatibility with the dsPIC33F family for design portability. Key features of the PIC24HJ128GP506A-H/PT include 16-bit RISC architecture with modified Harvard memory layout, 53 general-purpose I/O lines, multiple DMA channels, motor-control PWM peripherals, 12-bit ADC, and high-speed analog comparators. It operates from a 3.0V to 3.6V supply and supports industrial temperature grades. The 64-pin TQFP package provides adequate I/O for multi-peripheral designs and supports in-circuit serial programming (ICSP) plus JTAG debugging via the PGECx/PGEDx pin pairs. Architecturally, the PIC24HJ128GP506A-H/PT uses a 16-bit wide datapath with a 24-bit instruction word, enabling C-compiler-friendly code density. The peripheral set is engineered for closed-loop control tasks with dedicated PWM, quadrature encoder interfaces, and high-resolution input capture. This combination delivers deterministic performance for repetitive control algorithms running at motor-control rates. Typical applications include automotive body and chassis ECUs, industrial motor drives, HVAC fan controllers, BLDC/PMSM motor control, sensor-fusion nodes, and CAN/LIN-connected lighting or sensor modules. The automotive temperature grade and AEC-Q100 compliance make it suitable for under-hood and cabin electronics requiring extended thermal margin. When designing with this device, allocate the PGECx/PGEDx pairs together for ICSP and connect every VSS/VDD pin, even unused ones, to guarantee Flash programming reliability. Use Microchip's MPLAB X IDE and the XC16 compiler for code development, and validate any new firmware against the dsPIC33F-compatible peripheral libraries for migration safety. This page synthesizes distributor pricing, drop-in same-package alternatives from the PIC24H/dsPIC33F pin-compatible families, and practical design considerations (thermal, programming, debugging) not always surfaced on the manufacturer product page.

Cotización Contacto
PIC24HJ128GP506A-I/MR - 16-bit 40MIPS 128KB Flash MCU | Microchip 64-VQFN
PIC24HJ128GP506A-I/MR

PIC24HJ128GP506A-I/MR - 16-bit 40MIPS 128KB Flash MCU | Microchip 64-VQFN

The Microchip PIC24HJ128GP506A-I/MR is a 16-bit RISC microcontroller built on the PIC24H CPU core, delivering up to 40 MIPS performance at 3.3V in a 64-pin VQFN (9x9) industrial-grade package. It integrates 128 KB of Flash program memory and 8 KB of SRAM, providing ample headroom for embedded control and signal-processing applications that demand deterministic real-time execution at high code density. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (typically Flash), working RAM, and a rich set of peripherals such as ADC, PWM, UART, SPI and I2C. Within the semiconductor hierarchy, the PIC24HJ128GP506A belongs to the 16-bit MCU class -> microcontroller family -> embedded processor category -> semiconductor IC. The "PIC24H" sub-family is Microchip's high-performance 16-bit tier, sitting above the cost-optimized PIC24F and below the dsPIC33F DSP-enhanced parts, making it well suited to closed-loop control loops, motor drive, and high-speed sensor interfacing. Key features include a 16-channel 12-bit ADC capable of 500 ksps conversion, up to eight PWM outputs with edge-aligned or center-aligned modes, two UART, two SPI and two I2C peripherals, and a 16-bit timer/counter bank. The device also exposes multiple DMA channels that offload data movement between peripherals and RAM, freeing CPU cycles for application logic. The wide 3.0V to 3.6V supply range, dual Watchdog Timer and Fail-Safe Clock Monitor support robust industrial deployments. The ICSP/In-Circuit programming interface enables in-field firmware updates without removing the device from the PCB. Typical applications include industrial motor control (BLDC/PMSM FOC), digital signal processing front-ends, multi-channel data acquisition, point-of-load system monitoring, and embedded control for medical and consumer appliances. The 64-VQFN package exposes up to 53 digital I/O pins, supporting parallel sensor buses and human-interface buttons/LEDs simultaneously. Pair the MCU with an external EEPROM or serial Flash for data logging, and use the integrated 12-bit ADC for transducer readout. When laying out the PCB, place the 64-VQFN exposed pad (EP) directly over a top-layer copper pour stitched with thermal vias to inner ground layers to keep junction temperature within the -40C to +85C industrial range. The PIC24HJ128GP506A-I/MR is pin-compatible with the PIC24HJ128GP306A-I/MR and PIC24HJ128GP306-I/MR variants, simplifying PCB reuse across the 128/64 KB Flash tiers. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto
PIC24HJ128GP506A-I/PT - 40 MIPS 16-bit MCU 128KB Flash TQFP-64
PIC24HJ128GP506A-I/PT

PIC24HJ128GP506A-I/PT - 40 MIPS 16-bit MCU 128KB Flash TQFP-64

The Microchip Technology PIC24HJ128GP506A-I/PT is a high-performance 16-bit PIC24H microcontroller delivering up to 40 MIPS at 3.3V, packaged in a 64-pin TQFP (10x10 mm). It integrates 128 KB of Flash program memory organized as 43K x 24 words, 8 KB of SRAM data memory, and a DMA controller for CPU-offload data movement. The device operates from a 2.0V to 3.6V supply and supports an industrial temperature range of -40C to +85C, making it suitable for harsh embedded environments. What is a 16-bit microcontroller? A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O into one package. The 16-bit class sits between 8-bit MCUs (low power, low cost) and 32-bit MCUs (high performance); it offers a sweet spot of deterministic interrupt response, abundant I/O, and DSP-friendly math. Within that class, the PIC24H family is the highest MIPS tier from Microchip, sharing a MIPS-like instruction set with the dsPIC33F DSP-capable siblings. Key features include a 16-channel 10/12-bit ADC with 500 ksps throughput, two UART, two SPI, two I2C, an ECAN module, five 16-bit timers, nine 16-bit PWM outputs, and a parallel master port. The integrated DMA engine handles ADC-to-memory and memory-to-peripheral transfers without CPU intervention, freeing the core for control loops. Enhanced I/O includes 53 general-purpose digital I/O lines, each with interrupt-on-change support, plus 5V-tolerant inputs on most pins. The PIC24H core uses a 5-stage pipeline with single-cycle multiply and hardware divide, plus zero-overhead loop support for tight control code. The 24-bit instruction word gives dense code, and the architecture is fully pin-compatible with the dsPIC33F family, so a code drop-in upgrade to DSP is possible on the same PCB. Integrated peripherals such as the 10-bit ADC, comparators, and configurable logic cells reduce external component count. Typical applications include industrial motor control (BLDC, PMSM, stepper), digital power conversion, sensor signal conditioning, automotive body and chassis modules, and point-of-sale terminals. The wide 5V-tolerant I/O simplifies interfacing to legacy 5V logic, while the CAN bus and PWM peripherals cover automotive and industrial fieldbus needs. When designing with this part, plan the 3.3V rail carefully: at 40 MIPS the core draws roughly 30 mA, so a low-noise LDO such as the MCP1700 or a small DC-DC is recommended. Add 0.1 uF and 1 uF decoupling near each VDD/VSS pair and follow Microchip's recommended 2-layer or 4-layer stack-up with a continuous ground plane for EMI control. This page synthesizes distributor pricing, drop-in alternatives from the same PIC24H family and cross-brand pin-compatible MCUs, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
PIC24HJ128GP506AT-I/MR - 40 MIPS 16-bit MCU 128KB Flash 64-VQFN | Microchip
PIC24HJ128GP506AT-I/MR

PIC24HJ128GP506AT-I/MR - 40 MIPS 16-bit MCU 128KB Flash 64-VQFN | Microchip

The Microchip Technology PIC24HJ128GP506AT-I/MR is a 16-bit general-purpose microcontroller from the PIC24H family, offering 40 MIPS CPU performance with 128 KB (43K x 24) of Flash program memory in a 64-pin VQFN (9x9 mm) package with exposed thermal pad. It is specified for the industrial -40C to +85C temperature range and ships in tape-and-reel packaging. A 16-bit microcontroller (MCU) is a programmable integrated circuit that executes instructions on a 16-bit data path, delivering higher code density and arithmetic throughput than 8-bit MCUs while retaining deterministic real-time behaviour. The PIC24H family belongs to Microchip's broader PIC24F/dsPIC30F/dsPIC33F/PIC24H 16-bit MCU portfolio, which sits above 8-bit PIC10/12/16/18 devices in performance and below 32-bit PIC32 devices in code size. PIC24H MCUs are well-suited for motor control, digital power conversion, and high-speed sensor processing. Key features of this part include a 40 MHz maximum operating frequency (40 MIPS at the instruction cycle rate), 16 KB SRAM, 4 KB EEPROM, a 16-channel 10-bit/12-bit ADC, multiple SPI/I2C/UART peripherals, a Parallel Master Port, and a 16-bit timer/counter block. The modified Harvard architecture with a 16-bit wide datapath and 24-bit instructions enables efficient C-compiled code while keeping deterministic interrupt latency. Typical applications include industrial motor control (BLDC, PMSM, stepper), digital power conversion (PFC, LLC), sensor signal processing, and general-purpose embedded control. Compared with 32-bit Cortex-M0 alternatives at similar MHz, the PIC24HJ128GP506A delivers a richer DSP-friendly instruction set and tighter interrupt determinism, at the cost of a smaller ecosystem and less RAM. The wide -40C to +85C industrial range supports factory-floor deployment without additional qualification. When designing with this device, plan the power-rail decoupling around a 3.3V analog/digital supply pair, route the exposed pad to a continuous ground copper pour, and use the on-chip Peripheral Pin Select (PPS) feature to remap digital peripherals onto spare pins. Refer to Microchip application note AN1066 for migration paths from PIC24F/dsPIC30F devices, which share a pin-compatible footprint family.

Cotización Contacto
PIC24HJ128GP506AT-I/PT - 40 MIPS 16-bit MCU 128KB Flash | Microchip
PIC24HJ128GP506AT-I/PT

PIC24HJ128GP506AT-I/PT - 40 MIPS 16-bit MCU 128KB Flash | Microchip

The Microchip Technology PIC24HJ128GP506AT-I/PT is a high-performance 16-bit microcontroller from the PIC24H family that delivers up to 40 MIPS throughput, integrates 128 KB of Flash program memory and 8 KB of RAM, and is housed in a 64-pin TQFP (10x10 mm) package. It operates from a 3.0V to 3.6V supply and provides 53 general-purpose I/O pins, making it suitable for real-time control and high-speed signal processing applications. This member of the PIC24HJ128GP506A family uses the same PIC24H Harvard architecture that allows seamless migration to and from dsPIC30F, dsPIC33F, and PIC24F devices. A PIC24H microcontroller is a 16-bit RISC processor that combines an advanced modified Harvard architecture with DSP-oriented instructions, positioning it in the broader category of microcontrollers -> 16-bit MCUs -> embedded controllers -> semiconductor ICs. The 'H' suffix indicates the highest performance tier of the PIC24 family, achieving up to 40 MIPS at 3.3V while maintaining code compatibility with the PIC24F and dsPIC families. PIC24H MCUs typically feature DMA controllers, motor-control PWMs, and enhanced peripherals designed for motor drive, power conversion, and high-speed sensor interfacing. Key differentiating features of the PIC24HJ128GP506AT-I/PT include the 128 KB (43K x 24 instruction words) Flash, 8 KB RAM, hardware multiplier, four 16-bit timer/counters, up to four UART, two SPI, two I2C, and a 16-channel 10/12-bit ADC. The device also provides two analog comparators, a real-time clock and calendar (RTCC) with calendar mode, and a charge time measurement unit (CTMU) for capacitive touch and accurate timing measurements. These peripherals allow engineers to implement complex control loops, sensor interfaces, and communications stacks without external ICs. The architecture employs a 16-bit datapath with a modified Harvard structure that allows a 24-bit instruction word, providing code density comparable to 32-bit MCUs while maintaining low power consumption. The device also supports 16-channel DMA, reducing CPU load for high-throughput data movement between peripherals and memory. Combined with hardware-level IEC 60730 Class B support libraries, this simplifies functional-safety firmware development for household appliances. Typical applications include industrial motor control (BLDC, PMSM, AC induction), digital power conversion (SMPS, UPS, solar inverter MPPT), automotive body and chassis ECUs, medical instrumentation, and high-speed sensor fusion. The wide operating temperature range (-40C to +85C, 'I' grade) makes it suitable for industrial environments, and the 64-pin TQFP footprint allows straightforward PCB routing with a generous ground and power pin count for noise immunity. Designers should consider the 'T' suffix which denotes a tape-and-reel packaging option and the 'A' silicon revision. The part is pin-compatible with the dsPIC33FJ128GP306A family and the PIC24HJ128GP306A family, simplifying platform migration. When migrating to lower-cost variants, the PIC24HJ128GP506A-I/PT (tray) or PIC24HJ128GP506AT-I/MR (QFN) provide functionally identical alternatives in different footprints or packaging. This page consolidates distributor pricing, drop-in alternatives, and application design guidance drawn from the Microchip PIC24HJ128GP506 datasheet, supplementing the manufacturer documentation with comparative insight that is not available on a standalone product page.

Cotización Contacto
PIC24HJ128GP506T-I/PT - 16-bit 40MIPS MCU 128KB Flash | Microchip
PIC24HJ128GP506T-I/PT

PIC24HJ128GP506T-I/PT - 16-bit 40MIPS MCU 128KB Flash | Microchip

The Microchip Technology PIC24HJ128GP506T-I/PT is a 16-bit microcontroller from the PIC24H family, delivering 40 MIPS performance at 3.3V in a 64-pin TQFP (10x10 mm) package. It integrates 128KB (43K x 24) of Flash program memory, 8KB RAM, and a rich set of on-chip peripherals suited for general-purpose and real-time embedded control. The 'T' suffix indicates Tape & Reel packaging, while the 'I' industrial temperature grade extends operation from -40C to +85C, and 'PT' specifies the TQFP-64 package. A 16-bit microcontroller (MCU) is a microprocessor optimized for embedded control, integrating CPU, RAM, non-volatile program memory, and peripherals on a single silicon die. PIC24H MCUs use a modified Harvard architecture with 24-bit wide instructions and 16-bit data paths, giving them excellent code density and deterministic execution. They sit in Microchip's hierarchy between the 8-bit PIC18 and the digital-signal-controller dsPIC33 families, and are commonly chosen when an 8-bit MCU is too slow but a full DSP engine is unnecessary. Key features of the PIC24HJ128GP506 include 18 channels of 10-bit or 12-bit ADC (mixed), hardware multiplier and divider for fast math, an internal oscillator, and a broad communication peripheral set: CAN, I2C, IrDA, LIN, SPI, and UART/USART. Brown-out reset and watchdog protection are integrated, and the device supports 3.0V to 3.6V single-supply operation. Typical applications span motor control, industrial automation, smart sensors, automotive body and chassis ECUs, building automation, and consumer appliances where deterministic 16-bit performance, CAN connectivity, and an industrial temperature range are required in a single MCU. When designing with this device, ensure the VDD rail is decoupled with at least 100 nF plus bulk capacitance near the supply pins, and follow Microchip's programming specification for in-circuit serial programming (ICSP) pin assignment to retain debug access.

Cotización Contacto
PIC24HJ128GP510-I/PT - 40 MIPS 16-bit MCU 128KB Flash 100-TQFP | Microchip
PIC24HJ128GP510-I/PT

PIC24HJ128GP510-I/PT - 40 MIPS 16-bit MCU 128KB Flash 100-TQFP | Microchip

The Microchip Technology PIC24HJ128GP510-I/PT is a 16-bit PIC24H microcontroller delivering 40 MIPS CPU performance with 128 KB Flash program memory and 8 KB RAM, housed in a 100-pin TQFP (PT) 12x12 mm package rated for -40C to +85C industrial operation. A PIC24H microcontroller is a member of Microchip's 16-bit MCU family, designed for high-speed, deterministic control applications. Positioned in the taxonomy: PIC24H -> PIC24 family -> 16-bit MCU -> microcontroller -> embedded processor -> semiconductor, the PIC24H variant adds a high-performance 40 MIPS core with hardware multipliers and DSP-friendly instructions, while remaining pin-compatible with the dsPIC33F DSC family for migration flexibility. Key features of the PIC24HJ128GP510-I/PT include 128 KB (43K x 24) self-programmable Flash, 8 KB SRAM, a 16-channel 10/12-bit ADC, four 16-bit timers, two UART, two SPI, one I2C, and two CAN modules that make it ideal for industrial automation and motor-control bridges. The 40 MIPS throughput at 3.0-3.6V VDD supports high-bandwidth control loops. The 100-pin TQFP (PT) package exposes 85 I/O pins for expansive peripheral integration. Architecturally, the PIC24HJ128GP510-I/PT uses a modified Harvard 16-bit core with a 16x16 hardware multiplier and 40-bit accumulator, executing most instructions in one cycle. This MCU shares its peripheral set and pinout with the dsPIC33F family, allowing firmware migration when DSP instructions become desirable. Typical applications include industrial automation controllers, BLDC/PMSM motor drives, multi-axis CNC front-ends, sensor-fusion boards, and CAN-graphical design. In automotive body electronics (non-safety) and HVAC, the dual CAN peripherals provide robust node communication without an external transceiver pair mismatch. Design consideration: when migrating from PIC24F or dsPIC33F, verify the peripheral pin select (PPS) mapping since PPS enables flexible peripheral routing on select pins; ensure 3.3V rail decoupling includes 100 nF + 10 uF bulk per VDD/AVDD pair. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers select, source, and qualify the part quickly.

Cotización Contacto
PIC24HJ128GP510A-E/PF - 40 MIPS 128KB Flash 16-bit MCU | Microchip
PIC24HJ128GP510A-E/PF

PIC24HJ128GP510A-E/PF - 40 MIPS 128KB Flash 16-bit MCU | Microchip

The Microchip Technology PIC24HJ128GP510A-E/PF is a high-performance 16-bit PIC24H microcontroller featuring 128KB of Flash program memory, 8KB of RAM, and 40 MIPS execution speed at 3.3V, housed in a 100-pin TQFP (14x14 mm) package. The device is AEC-Q100 qualified for automotive applications and operates across an extended -40C to +125C temperature range. A 16-bit microcontroller (MCU) is a microprocessor core that processes data and instructions in 16-bit wide paths, occupying a middle position in the embedded hierarchy: 8-bit MCU (low-cost, simple control) -> 16-bit MCU (balanced performance and peripherals, real-time control) -> 32-bit MCU (high-performance, RTOS, connectivity). The PIC24H family uses a modified Harvard RISC architecture with a 16-bit data path and 24-bit instruction word, enabling single-cycle MAC operations and DSP-friendly addressing for signal processing and motor control applications. Key features include 40 MIPS performance from a 40 MHz oscillator, dual 16-bit timers, a 10/12-bit ADC with up to 32 channels, two UART/SPI/I2C peripherals, an Enhanced CAN module, and a Parallel Master Port for off-chip memory expansion. The 128KB self-programmable Flash supports In-Circuit Serial Programming (ICSP) and a 16-bit-wide data path enables DSP-class throughput for embedded signal-processing tasks. The PIC24HJ128GP510A-E/PF is pin-compatible with the dsPIC33F family, allowing migration to DSP-enhanced variants without PCB rework. Internal phase-locked loops (PLLs) multiply the external oscillator to 40 MHz, while the wide 3.0-3.6V supply range and low-power sleep modes simplify battery-backed designs. The extended (-E) temperature grade and AEC-Q100 qualification make this variant the proper choice for under-hood and industrial environments. Typical applications include automotive body and chassis controllers, industrial motor drives, medical instrumentation, and high-performance sensor hubs. The combination of CAN, ADC, and 16-bit DSP-class throughput makes it a strong fit for real-time closed-loop control. When designing with this part, allocate sufficient decoupling (100 nF ceramic plus 10 uF bulk) close to each VDD/VSS pair, keep ADC traces short and referenced to analog ground, and use the on-chip PLL with a low-frequency crystal to minimise EMI. Configure the JTAG/ICSP pins carefully during layout to avoid in-circuit programming conflicts. This page synthesises distributor pricing, cross-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto