Microcontroladores

Productos (18732)

PIC24HJ256GP206AT-I/PT - 40 MIPS 256KB Flash 16-bit MCU | Microchip
PIC24HJ256GP206AT-I/PT

PIC24HJ256GP206AT-I/PT - 40 MIPS 256KB Flash 16-bit MCU | Microchip

The Microchip Technology PIC24HJ256GP206AT-I/PT is a 16-bit microcontroller from the PIC24H General Purpose family, delivering up to 40 MIPS performance at 3.3 V in a 64-pin TQFP (10x10 mm) package. It integrates 256 KB of Flash program memory, 16 KB of RAM, and a rich set of peripherals including multiple UART, SPI, I2C, ECAN, and a 16-channel 10/12-bit ADC. The "T" suffix denotes Tape & Reel packaging, while the "A" suffix denotes the A-revision silicon with enhanced features. Industrial temperature grade (-40C to +85C) and 3.0 V to 3.6 V operating voltage make it suitable for embedded control and signal acquisition. What is a 16-bit microcontroller? A 16-bit MCU is a single-chip computer whose datapath, registers, and ALU are 16 bits wide, offering higher computational throughput and code density than 8-bit parts while consuming less power than 32-bit cores. The PIC24H family belongs to the broader category of Microchip DSC (Digital Signal Controller) derivatives and occupies the mid-range of Microchip's performance pyramid: PIC -> 16-bit PIC24 -> PIC24H (high-performance) -> 32-bit PIC32. The PIC24H is widely used in motor control, power conversion, industrial sensing, and CAN-connected automotive/industrial nodes. Key differentiating features include 40 MIPS execution from a modified Harvard core with C-compiler-optimized instruction set, 16 KB unified data RAM accessible from DMA and the CPU, and an on-chip 16-channel 12-bit ADC capable of 500 ksps. The device also provides a 16-bit timer/capture/compare module set, hardware ECAN 2.0B for automotive/industrial networks, and a Peripheral Pin Select (PPS) mechanism that allows flexible remapping of digital peripherals to any I/O pin. Architecture details: The PIC24HJ256GP206A uses a 16-bit modified Harvard architecture with separate program and data paths, a 24-bit instruction word, and a hardware multiplier (17-bit x 17-bit single-cycle). The core supports 84 instructions including DSP-aware addressing modes, enabling efficient FFT and FIR filtering without off-chip DSP silicon. PPS allows most digital peripherals to be mapped onto a wide choice of pins, easing PCB layout. Typical applications include industrial sensor conditioning and CAN node interfaces, motor control driver boards (BLDC, stepper, PMSM), HVAC and building automation controllers, automotive body and chassis ECUs, medical instrumentation front-ends, and USB device/HID peripherals when paired with an external transceiver. When designing with this part, reserve at least one PPS-capable pin group for the UART/SPI/I2C peripherals you intend to use, and verify the 3.3 V rail regulation (the device does not include an internal LDO for core supply). For new designs consider the PIC24HJ256GP610A successor family for higher analog integration. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not aggregated on the manufacturer product page.

Cotización Contacto
PIC24HJ256GP210-I/PF - 16-bit 40MIPS 256KB Flash MCU | Microchip
PIC24HJ256GP210-I/PF

PIC24HJ256GP210-I/PF - 16-bit 40MIPS 256KB Flash MCU | Microchip

The Microchip Technology PIC24HJ256GP210-I/PF is a high-performance 16-bit microcontroller from the PIC24H family, delivering 40 MIPS (Million Instructions Per Second) execution throughput at 80 MHz core clock. It integrates 256 KB (85.5K x 24 instruction words) of Flash program memory and 30 KB of SRAM, packaged in a 100-pin TQFP (14x14 mm, PF suffix) industrial-temperature variant. A 16-bit MCU (microcontroller unit) is a single-chip computer integrating a CPU, memory, and programmable peripherals, used for embedded control where 8-bit devices lack the performance and 32-bit devices waste cost and power. The PIC24H family specifically targets high-speed, repetitive computation and closed-loop control, slotting into the broader taxonomy: microcontroller -> embedded processor -> semiconductor. It offers a 16-bit modified Harvard architecture with DSP-friendly instructions, C-optimized instruction layout, and seamless code migration to PIC24F (lower power), dsPIC30F, and dsPIC33F (DSP) families. Key features include two UART modules, two SPI interfaces, two I2C modules, two CAN modules (one ECAN plus one mCAN) for industrial networking, a 16-channel 10/12-bit ADC with 500 ksps conversion rate, four 16-bit timers, eight output compare/PWM channels, and a parallel master port. The device operates from 3.0 V to 3.6 V across -40C to +85C industrial temperature range, with on-chip voltage regulation eliminating external analog supply rails. A JTAG/debug port and trace buffer enable real-time development with MPLAB X IDE and the MPLAB ICD 3 / REAL ICE in-circuit emulators. Architecture-wise, the PIC24HJ256GP210 uses Microchip's 16-bit modified Harvard core with a 24-bit instruction word and 16-bit data path, allowing single-cycle MAC operations and deterministic interrupt response. The 256 KB Flash is divided into a primary program region and a separate block region supporting live firmware update via the dual-panel Flash partition scheme. Typical applications include industrial motor control (BLDC, PMSM, AC induction drives), industrial automation PLCs, CAN-connected sensor nodes, power-conversion digital control loops, medical instrumentation, and high-speed data acquisition front-ends. Two on-chip CAN modules and PWM make this device especially suited to multi-axis motor control cards and distributed factory nodes. When designing with this device, place bulk and decoupling capacitors within 5 mm of each power pin pair (VDD/VSS), keep analog and digital ground returns split until the single-point connection under the IC, and verify that high-current PWM traces are at least 0.5 mm wide to handle multi-ampere H-bridge returns. Programming via ICSP requires the recommended PGECx/PGEDx pin assignments - check device errata before locking the PCB. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that are not aggregated in any single manufacturer document.

Cotización Contacto
PIC24HJ256GP210-I/PT - 16-bit 40MIPS 256KB Flash MCU | Microchip
PIC24HJ256GP210-I/PT

PIC24HJ256GP210-I/PT - 16-bit 40MIPS 256KB Flash MCU | Microchip

The Microchip Technology PIC24HJ256GP210-I/PT is a high-performance 16-bit microcontroller from the PIC24H family, delivering up to 40 MIPS at 3.3V (60 MIPS when operated at higher Vdd with PLL enabled) and integrating 256 KB of flash program memory with 16 KB of on-chip SRAM, packaged in a 100-pin TQFP (12x12 mm). This device combines a powerful PIC® modified Harvard RISC architecture with a rich peripheral set, including a 12-bit A/D converter with up to 32 input channels, multiple UART, SPI, and I²C interfaces, plus a 16-bit Parallel Master Port for external memory or graphics interfacing. A 16-bit microcontroller (MCU) is a single-chip computer that executes instructions on 16-bit-wide data paths, sitting in the hierarchy between 8-bit MCUs (such as the PIC16/PIC18 families) and 32-bit MCUs (such as the PIC32MX or ARM Cortex-M devices). Within Microchip's taxonomy the PIC24H family is the highest-performance 16-bit line before the dsPIC33F DSC family, sharing pin compatibility with dsPIC33F and offering seamless migration paths to/from PIC24F and dsPIC30F. These MCUs target embedded control applications that demand deterministic interrupt response, DSP-class math, and abundant I/O. Key features of the PIC24HJ256GP210-I/PT include 256 KB self-programmable flash (85.5K x 24 words) with EEPROM emulation, 16 KB SRAM, a 16-channel hardware DMA controller that offloads data movement from the CPU, an Enhanced CAN 2.0B module for automotive and industrial networking, four 16-bit timers, nine 16-bit Input Capture and Output Compare/PWM channels, a Real-Time Clock/Calendar with on-chip low-power 32 kHz crystal oscillator, and a 10-bit 1 MSPS ADC alongside the 12-bit 500 ksps ADC. The Industrial temperature grade (-40 °C to +85 °C) and TQFP-100 footprint make it broadly applicable across factory automation, motor control, and medical instrumentation. Architecturally the PIC24HJ256GP210 uses a 24-bit instruction word with 16-bit data paths, a 7-stage pipeline, hardware multiply/divide (17-bit x 17-bit single-cycle MAC), and a deterministic interrupt latency of 5 cycles. Its peripheral set is mapped onto a peripheral pin-select (PPS) matrix that allows most digital functions to be remapped to a wide range of I/O pins, simplifying PCB routing. The 16-bit Parallel Master Port and Enhanced CAN module position this device for applications that previously required external logic or a secondary MCU. Typical applications include industrial motor control (BLDC, PMSM, AC induction), CAN-based automotive body and chassis nodes, graphic LCD or OLED user-interface controllers, multi-channel data-acquisition systems, and digital signal conditioning. It is pin-compatible with the entire PIC24HJXXXGPX06/X08/X10 family and with the dsPIC33FJXXXGPX06/X08/X10 DSC devices, which simplifies firmware upgrades when the application outgrows a pure control MCU and requires on-chip DSP. When designing with the PIC24HJ256GP210-I/PT, plan decoupling with at least one 0.1 µF ceramic capacitor per Vdd/Vss pair and a single bulk 10 µF tantalum or ceramic near the regulator output. The device can be programmed and debugged in-circuit via Microchip's ICD 3, REAL ICE, or PICkit 3 programmers using the standard 2-wire PGECx/PGEDx interface. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet, making it a faster starting point for embedded engineers evaluating 16-bit MCU platforms.

Cotización Contacto
PIC24HJ256GP210A-E/PF - 40 MIPS 16-bit MCU 256KB Flash 100-TQFP | Microchip
PIC24HJ256GP210A-E/PF

PIC24HJ256GP210A-E/PF - 40 MIPS 16-bit MCU 256KB Flash 100-TQFP | Microchip

The Microchip Technology PIC24HJ256GP210A-E/PF is a 16-bit PIC24H microcontroller running up to 40 MIPS at 3.3V, integrating 256 KB (85.5K x 24 words) of Flash program memory and 16 KB of SRAM in a 100-pin TQFP (14x14 mm) package. The PIC24HJ256GP210A family is positioned for high-speed control loops and DSP-style computations where 8-bit MCUs run out of headroom, while remaining fully static CMOS for low-power idle behavior. A 16-bit microcontroller (MCU) is an integrated processor that fetches 16-bit instructions from on-chip Flash, executes them on a modified Harvard core with on-chip peripherals (timers, ADC, UART, SPI, I2C, PWM, etc.), and is targeted at applications that need more throughput and code density than 8-bit parts but not the cost of a Cortex-M class device. Within Microchip's taxonomy this part belongs to the PIC24H dsPIC-style 16-bit MCU family, which is pin-compatible with the dsPIC33F DSP MCU family, allowing migration when DSP extensions are later required. Key features include 40 MIPS sustained throughput from a 2.0V-3.6V supply, 256 KB self-programmable Flash with an endurance of >10k cycles, up to 16 KB SRAM, two UART modules, two SPI, two I2C, two I2S, a 10/12-bit ADC, multiple 16-bit timers, and a parallel master port. The 'GP' family variant optimizes for general-purpose I/O rich designs versus the motor-control 'MC' or op-amp 'GA' series. Typical applications include industrial motor control (BLDC, PMSM, stepper), digital power conversion (PFC, LLC, full-bridge), sensor conditioning and instrumentation, factory automation controllers, and consumer appliances with TFT or graphics HMI. The -E temperature grade extends operation from -40C to +125C for harsh industrial environments. Designers should bias all unused I/O to defined logic states via internal pull-ups or external resistors to minimize standby current, and follow the decoupling scheme in the datasheet (typically 0.1 uF near each VDD/VSS pair and a 10 uF bulk cap). Pin migration from 64-pin to 100-pin TQFP variants preserves peripheral mapping. This page synthesizes distributor pricing, pin-compatible drop-in alternatives within the PIC24HJ256GP206/GP210/GP310 family, and practical design notes that go beyond the manufacturer datasheet.

Cotización Contacto
PIC24HJ256GP210A-E/PT - 16-bit 40MIPS MCU 256KB Flash | Microchip
PIC24HJ256GP210A-E/PT

PIC24HJ256GP210A-E/PT - 16-bit 40MIPS MCU 256KB Flash | Microchip

The Microchip Technology PIC24HJ256GP210A-E/PT is a high-performance 16-bit microcontroller from the PIC24H family, delivering 40 MIPS at 3.3V in a 100-pin TQFP (12x12 mm) package. It integrates 256 KB of Flash program memory (85.5K x 24 words) and 16 KB of SRAM, providing ample code and data space for DSP-oriented control applications. The "E" temperature grade (-40C to +125C) and AEC-Q100 qualification make this part suitable for automotive and extended-industrial environments. A 16-bit microcontroller (MCU) is an embedded processor that executes instructions on 16-bit-wide data paths, sitting in the hierarchy between 8-bit MCUs (lower performance, lower cost) and 32-bit MCUs (higher performance, higher complexity). Within Microchip's taxonomy, the PIC24H family belongs to the "MCU > 16-bit MCU > dsPIC33/PIC24H" branch, designed for high-speed repetitive computations combined with deterministic control. The PIC24HJ256GP210A-E/PT extends this branch by adding automotive-grade qualification and a larger 100-pin TQFP footprint for applications demanding many I/O pins and analog channels. Key features include a 40 MHz internal oscillator with PLL (40 MIPS execution), a 12-bit ADC with up to 32 channels and 500 ksps conversion rate, two UART modules, two SPI modules, two I2C modules, two CAN modules, and a 16-bit Parallel Master Port (PMP) for external bus expansion. DMA with 8 channels offloads data movement from the CPU, and a 16-bit timer/capture/compare/PWM peripheral set enables motor-control and power-conversion timing. The architecture pairs a modified Harvard bus with a 24-bit instruction word, allowing most instructions to execute in one cycle. The CPU includes hardware DSP support (multiply-accumulate), making this device well-suited for digital filtering, sensor fusion, and motor-control algorithms where fixed-point math is acceptable. The peripheral set is pin-compatible with the dsPIC33F family, allowing migration paths to DSP-capable variants without PCB redesign. Typical applications include automotive body and chassis control, industrial motor drives, three-phase inverters, sensor signal conditioning, LED lighting controllers, and medical instrumentation. The CAN interfaces suit automotive networks (CAN 2.0B) and industrial fieldbus, while the 12-bit ADC handles analog sensor input directly. The wide temperature range and AEC-Q100 qualification support under-hood and dashboard automotive designs. When designing with this part, allocate the 100-pin TQFP footprint carefully - the package requires a 12x12 mm PCB land pattern with thermal pad considerations. Use MPLAB X IDE with XC16 compiler for development; ICD 3 or ICD 4 in-circuit debuggers and PICkit 3 programmers support this device. The PLL configuration register must be programmed before the high-speed oscillator is enabled, otherwise the device may lock up at default FRC. This page synthesizes drop-in alternatives from the same PIC24H family, automotive-grade variants, pricing tiers from authorized distributors, and practical design notes that the standalone datasheet does not aggregate.

Cotización Contacto
PIC24HJ256GP210A-I/PT - 40 MIPS 256KB Flash 16-bit MCU | Microchip
PIC24HJ256GP210A-I/PT

PIC24HJ256GP210A-I/PT - 40 MIPS 256KB Flash 16-bit MCU | Microchip

The Microchip Technology PIC24HJ256GP210A-I/PT is a 16-bit PIC24H general-purpose microcontroller running up to 40 MIPS at 40 MHz with 256 KB (85.5K x 24) of Flash program memory and 16 KB of SRAM, housed in a 100-pin TQFP (PT) package measuring 12x12 mm. The integrated DMA controller moves data between peripherals and memory without CPU intervention, while an enhanced 16-channel 10-bit/12-bit ADC, multiple UART/SPI/I2C peripherals, and JTAG boundary-scan support round out the device. Operating voltage spans 3.0V to 3.6V with an industrial temperature range of -40C to +85C. What is a PIC24H microcontroller? A PIC24H is a 16-bit RISC microcontroller from Microchip's PIC24 family that uses a modified Harvard architecture with 16-bit instructions and 24-bit instructions targeting sixteen data word registers. Within the Microchip taxonomy the PIC24H sits in the 16-bit microcontroller hierarchy: PIC24F (low-power) < PIC24H (high-performance 16-bit) < PIC24E (high-performance 40-70 MIPS) < dsPIC33 (DSP-enabled). It is pin-compatible with the dsPIC33F family, allowing code and PCB reuse when designers migrate to DSP functionality. An embedded DMA engine, multi-channel ADC, and rich peripheral set position the PIC24H for demanding real-time control. Key features include 256 KB self-programmable Flash with EEPROM emulation in RAM, 16 KB SRAM, an 8-channel DMA controller, two UART modules with IrDA support, two SPI modules, two I2C modules, a 16-channel 12-bit ADC with 500 ksps throughput, and JTAG IEEE 1149.1 boundary-scan compliance. Five 16-bit timer/counter modules, an input capture module, and an output compare/PWM module complete the timer subsystem. Architecturally the PIC24H uses a single-cycle 16-bit ALU, hardware multiply/divide, and a 24-bit instruction word with 16-bit data paths, achieving up to 40 MIPS at 40 MHz. The internal DMA can transfer data between ADC, UART, SPI, and RAM without waking the CPU, while the integrated 16-channel ADC with dual-sample-and-hold enables simultaneous motor-current and back-EMF measurement. Typical applications include industrial motor control (BLDC, PMSM, AC induction), high-performance sensor processing, multi-protocol industrial communication bridges, and digital power conversion control loops. The combination of 40 MIPS throughput and DMA offload makes the device well suited for closed-loop control at PWM rates above 100 kHz. When designing with this MCU, provide adequate bulk capacitance on the 3.3V rail for ADC reference stability, leave JTAG pins accessible for production boundary-scan testing, and ensure external oscillator load capacitors match the crystal manufacturer recommendations for reliable start-up.

Cotización Contacto
PIC24HJ256GP210AT-I/PF - 16-bit 40MIPS 256KB Flash MCU | Microchip
PIC24HJ256GP210AT-I/PF

PIC24HJ256GP210AT-I/PF - 16-bit 40MIPS 256KB Flash MCU | Microchip

The Microchip Technology PIC24HJ256GP210AT-I/PF is a 16-bit RISC microcontroller featuring a PIC24 CPU core, 256 KB of Flash program memory, and a maximum 40 MIPS throughput, packaged in a 100-pin TQFP (14x14 mm, 0.5 mm pitch) industrial-temperature tape-and-reel format. It integrates 16 KB RAM, 4 KB EEPROM-like auxiliary Flash, 8 KB of auxiliary Flash for data, and a 16-channel 10-bit ADC A/D pipeline (1.1 Msps aggregate throughput) for data acquisition and signal conditioning. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile data memory (SRAM), and a rich set of peripherals on a single silicon die. The PIC24HJ256GP210AT-I/PF belongs to the PIC24HJ 16-bit MCU family that occupies the middle of Microchip's 16-bit portfolio (F >> H >> EP), bridging 8-bit PIC16/PIC18 designs and the dsPIC33F digital signal controllers. Its 16-bit modified-Harvard architecture with 24-bit instructions targets deterministic real-time control rather than integer-crunching DSP workloads. Key differentiating features include a 40 MHz maximum clock frequency producing 40 MIPS of sustained throughput, an enhanced 16-bit timer/capture/compare module set, dual UART/SPI/I2C peripherals, an internal 7.37 MHz Fast RC oscillator with PLL, and 85 GPIO pins arranged across multiple I/O ports. The device operates from 3.0-3.6 V, supports an industrial -40C to +85C temperature range (I-grade), and includes JTAG boundary-scan alongside Microchip's ICSP programming interface for in-circuit debug. Architecturally, the PIC24HJ256GP210A employs a 5-stage pipeline, a 16 x 16-bit working register array, and a DMA engine that can shuttle data between peripherals and RAM without CPU intervention. The 'A' silicon revision (PIC24HJ256GP210A) extends peripheral timing and electrical performance over the original PIC24HJ256GP210, while pin-for-pin compatibility with the dsPIC33F family allows migration to DSP capability if FFT/FIR math becomes a requirement. Typical applications include industrial motor control (BLDC/PMSM FOC), multi-loop PID process control, building automation HVAC controllers, PLC expansion modules, power-conversion digital controllers (DC/DC, PFC), and graph display driver MCUs for HMI panels. The 100-pin TQFP footprint gives designers 85 GPIO plus analog channels for keypad, LCD, motor-driver, and communication interfaces simultaneously. When designing with this device, plan the PLL configuration and oscillator start-up delay carefully because the internal FRC + PLL loop must settle before the regulator can release the system. A 1 mF bulk + 100 nF decoupling pair at each VDD/VSS pair is essential given the 40 MIPS switching activity of this PIC24HJ256GP210A industrial MCU. This page synthesizes distributor pricing, drop-in Microchip alternatives, and practical design notes not found in the manufacturer datasheet alone, helping procurement and firmware teams rapidly qualify a 40 MIPS 16-bit PIC24H MCU replacement candidate.

Cotización Contacto
PIC24HJ256GP210AT-I/PT - 256KB Flash 40MIPS 16-bit MCU | Microchip
PIC24HJ256GP210AT-I/PT

PIC24HJ256GP210AT-I/PT - 256KB Flash 40MIPS 16-bit MCU | Microchip

The Microchip PIC24HJ256GP210AT-I/PT is a high-performance 16-bit microcontroller from the PIC24H family, delivering 40 MIPS at 3.3V with 256KB of Flash program memory (85.5K x 24) housed in a 100-pin TQFP (12x12 mm) package. It features 16KB of RAM, a 40 MHz maximum operating frequency, and a 16-channel 10/12-bit ADC capable of 500 ksps conversion rates. A 16-bit microcontroller (MCU) is a programmable integrated circuit that uses a 16-bit data path, instruction word, and internal registers to execute arithmetic, logic, and control operations. The PIC24H belongs to the dsPIC/PIC24 family hierarchy: 16-bit MCU -> dsPIC/PIC24 family -> Modified Harvard architecture MCU -> embedded controller. These devices occupy the performance tier between 8-bit PIC MCUs and 32-bit ARM Cortex devices, making them suitable for computationally intensive real-time control. Key differentiating specifications of the PIC24HJ256GP210AT-I/PT include 256KB self-programmable Flash with endurance of 1000 erase/write cycles, a 16-channel 12-bit ADC with 500 ksps throughput, multiple communication peripherals (UART, SPI, I2C, ECAN, and parallel PMP), and industrial-grade operating temperature of -40C to +85C. The 'T' suffix indicates Tape & Reel packaging, while 'I/PT' denotes the 100-pin TQFP industrial-temperature variant. The device uses a Modified Harvard architecture with a 16-bit wide datapath and 24-bit instruction word, providing up to 40 MIPS performance at 3.3V. It integrates DSP-aware arithmetic operations including MAC (multiply-accumulate) and bit-reversed addressing, simplifying digital filter and FFT algorithm implementation. The peripheral set supports motor control PWM, encoder interfaces, and CAN 2.0b networking, enabling single-chip solutions in industrial automation. Typical applications include industrial motor control (BLDC, PMSM, ACIM drives), digital signal processing front-ends, building automation controllers, medical patient-monitoring instruments, automotive body and chassis ECUs, and high-performance sensor/fanout hubs. The device's pin compatibility with the dsPIC33F family enables seamless migration between pure control and DSP-enhanced firmware variants. When designing with this part, verify that the 3.0V to 3.6V supply is regulated and that the 100-pin TQFP layout reserves adequate copper area for the exposed thermal pad. Configuration bits must be programmed for oscillator selection, watchdog timer, and code protection during production programming. This page synthesizes distributor pricing, drop-in alternative TQFPVB-100 parts from the same Microchip PIC24H family, and practical PCB layout guidance not consolidated in the manufacturer datasheet.

Cotización Contacto
PIC24HJ256GP210T-I/PF - 40 MIPS 256KB Flash 16-bit MCU | Microchip
PIC24HJ256GP210T-I/PF

PIC24HJ256GP210T-I/PF - 40 MIPS 256KB Flash 16-bit MCU | Microchip

The Microchip Technology PIC24HJ256GP210T-I/PF is a 16-bit PIC24H general-purpose microcontroller delivering 40 MIPS performance, 256 KB of Flash program memory, and 16 KB of RAM, packaged in a 100-pin TQFP (14x14) surface-mount housing. According to the Microchip PIC24HJ256GP210 family datasheet, this MCU combines a high-performance 16-bit modified Harvard CPU core with rich peripheral integration including multiple UART, SPI, I2C, and enhanced CAN interfaces, an external memory bus, and a 10/12-bit ADC. A PIC24 microcontroller is a 16-bit MCU from Microchip's PIC24 family that uses a modified Harvard architecture with separate program and data buses, enabling single-cycle instruction prefetch and deterministic interrupt response. It sits within the broader hierarchy of microcontrollers (MCU -> 16-bit MCU -> PIC24 -> PIC24H high-performance), positioned above the 8-bit PIC16/PIC18 families and below the 32-bit PIC32 devices. The PIC24H subfamily is optimized for high-throughput DSP-adjacent applications without a full DSP engine. Key features include 85 I/O pins, two UART modules, two SPI interfaces, two I2C peripherals, two Enhanced CAN 2.0B modules, one 16-bit timer and five 16-bit timers/counters, an input capture module, and a 10-bit/1.1 Msps A/D converter with up to 32 input channels. The device operates from 3.0 V to 3.6 V across an industrial -40C to +85C temperature range and supports in-circuit serial programming (ICSP) plus JTAG boundary scan. Technically, the PIC24HJ256GP165 architecture provides a 24-bit instruction word with 16-bit data paths, 17 x 17-bit hardware multiplier, 32-bit barrel shifter, and zero-overhead hardware DO/REPEAT loops, delivering 40 MIPS at 80 MHz FOSC. The integrated DMA controller with up to 8 channels offloads peripheral transfers and frees the CPU for control logic. Typical applications include industrial automation and motor control, data acquisition systems, communication gateways, building automation controllers, medical instrumentation, and automotive body/telematics ECUs. Designers typically choose this device when they need large Flash for protocol stacks plus CAN connectivity in a single chip. When designing with this MCU, allocate a 100 nF decoupling capacitor near each power pin and a 10 uF bulk capacitor on the 3.3 V rail. The PIC24HJ256GP210 is a 3.3 V part; do not apply 5 V signals to any I/O. Always configure unused I/O as outputs to minimize power consumption. This page synthesizes distributor pricing, drop-in alternatives, and practical design guidance not included in the bare manufacturer datasheet, giving engineers a faster selection path.

Cotización Contacto
PIC24HJ256GP610A-H/PF - 16-bit 40 MIPS MCU 256KB Flash TQFP-100 | Microchip
PIC24HJ256GP610A-H/PF

PIC24HJ256GP610A-H/PF - 16-bit 40 MIPS MCU 256KB Flash TQFP-100 | Microchip

The Microchip Technology PIC24HJ256GP610A-H/PF is a 16-bit microcontroller from the PIC24H family featuring a high-performance 40 MIPS core, 256 KB of Flash program memory (organized as 85.5K x 24), and 16 KB of on-chip SRAM, housed in a 100-pin TQFP (14x14 mm) package. It operates from a 3.0 V to 3.6 V supply and is AEC-Q100 qualified for automotive applications, making it well suited to harsh-environment designs. The '-H' temperature grade indicates -40C to +150C operation, while the '/PF' suffix designates the TQFP-100 package with Tray packaging. A 16-bit microcontroller (MCU) is a programmable integrated circuit that uses a 16-bit data path, registers, and arithmetic logic unit to deliver higher code density and throughput than 8-bit architectures while remaining simpler and lower-cost than 32-bit parts. The PIC24H belongs to the Microchip dsPIC33F/PIC24H ecosystem, sharing peripherals with the dsPIC33F Digital Signal Controller family and offering a documented migration path to PIC24F, dsPIC30F, and dsPIC33F devices. Within the broader taxonomy, a PIC24H MCU is a member of the microcontroller -> embedded controller -> semiconductor device hierarchy. The PIC24HJ256GP610A in particular integrates 256 KB Flash and 16 KB SRAM for application and data storage. Key differentiating features include a Harvard architecture with a modified RISC instruction set supporting 16-bit and 32-bit operations, a hardware multiply engine with single-cycle 16x16 or 32x16 multiplication, and a 16-bit data shifter capable of up to 16-bit single-cycle shifts. Integrated peripherals include a 16-channel 10-bit/12-bit ADC (depending on variant), multiple PWM modules, a Real-Time Clock and Calendar (RTCC), UART, SPI, I2C, ECAN, DMA controller, watchdog timer, brown-out reset, and power-on reset. The PIC24HJ256GP610A-H/PF also provides two 3-wire SPIs and 4-wire SPIs as well as 4 UARTs (with IrDA support) for serial communication. The device architecture uses a 16-bit wide program memory bus paired with a separate 16-bit data bus, allowing simultaneous instruction fetch and data access. Internal PLL operation allows the part to run at 40 MIPS from a typical 8 MHz crystal, and the divide algorithm completes one cycle per bit of divisor. This combination of high-throughput core, ample SRAM, and rich peripherals positions the PIC24HJ256GP610A-H/PF for applications that need deterministic interrupt latency and computational headroom. Typical applications include automotive body and chassis control, industrial motor control (BLDC, PMSM, and AC induction drives), Uninterruptible Power Supply (UPS) and power conversion control, advanced sensing platforms (satcom and instrumentation), and high-reliability consumer/industrial embedded control. The wide operating temperature range and AEC-Q100 grade also suit under-hood and ruggedized installations. The PIC24HJ256GP610A-H/PF is pin-compatible with the dsPIC33F family, allowing seamless migration to a DSP-capable part without PCB rework. When designing with this MCU, allocate adequate decoupling (typically 0.1 uF ceramic per VDD/AVDD pin), and use the Explorer 16 or equivalent development board to validate the firmware build with the latest MPLAB X IDE and XC16 compiler. Verify that any drop-in alternative shares the same TQFP-100 footprint and peripheral map before substituting. This page synthesizes distributor pricing, pin-compatible drop-in alternatives within the PIC24H family, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto
PIC24HJ256GP610A-I/PT - 40 MIPS 16-bit MCU 256KB Flash | Microchip
PIC24HJ256GP610A-I/PT

PIC24HJ256GP610A-I/PT - 40 MIPS 16-bit MCU 256KB Flash | Microchip

The Microchip Technology PIC24HJ256GP610A-I/PT is a high-performance 16-bit microcontroller from the PIC24H family, delivering 40 MIPS at 3.3V with 256 KB Flash and 16 KB SRAM, housed in a 100-pin TQFP (12x12 mm) package. It uses a 16-bit modified Harvard architecture with a 24-bit instruction word and supports up to 85.5K x 24 of program memory, providing ample headroom for advanced DSP-style control loops and high-speed signal conditioning. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash, SRAM), and programmable peripherals on one die. Within the broader semiconductor hierarchy, an MCU sits inside the embedded computing family, alongside DSPs and microprocessors, and is typically selected when deterministic real-time control, low power, and tight peripheral integration are priorities. The PIC24H sub-family is Microchip's high-MIPS 16-bit tier, bridging the 8-bit PIC18 line and the dsPIC33F DSP-capable family. Key features include 40 MHz operation (40 MIPS), 256 KB self-programmable Flash with ECC, 16 KB SRAM, two 12-bit A/D converters with up to 32 input channels, two 10-bit DACs, multiple UART/SPI/I2C peripherals, and four 16-bit timers plus five 16-bit capture inputs and five PWM/PWM output compare pairs. The device operates from 3.0V to 3.6V and supports an industrial -40C to +85C temperature range. Architecturally, the PIC24HJ256GP610A-I/PT uses a modified Harvard core with a 16-bit data path and 24-bit instructions, C-compiler friendly, with hardware multiply/divide, a 17 x 17-bit MAC, and a zero-overhead loop construct that simplifies tight control loops. Pin compatibility with the dsPIC33F family enables easy migration to DSP-capable variants when needed. Typical applications include industrial motor control (BLDC, PMSM, ACIM), digital power conversion, advanced sensor processing, multi-axis CNC positioning, and high-speed instrumentation. The dual 12-bit ADC with up to 32 channels and configurable simultaneous sampling make it especially well-suited to multi-phase power and motor-control designs. When designing, ensure decoupling with 0.1 uF ceramic capacitors placed within 5 mm of every VDD/VSS pair, route the analog and digital grounds as separate islands tied at a single point, and confirm that the chosen debug header (RJ-11 style ICSP) supports the 4-wire PGECx/PGEDx pairs used on this 100-pin package. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a faster path from spec review to EV battery production.

Cotización Contacto
PIC24HJ256GP610AT-I/PF - 40 MIPS 16-bit MCU 256KB Flash 100-TQFP | Microchip
PIC24HJ256GP610AT-I/PF

PIC24HJ256GP610AT-I/PF - 40 MIPS 16-bit MCU 256KB Flash 100-TQFP | Microchip

The Microchip Technology PIC24HJ256GP610AT-I/PF is a high-performance 16-bit microcontroller from the PIC24H family, featuring a 40 MIPS modified Harvard RISC CPU core, 256 KB of self-programmable Flash program memory, and a 100-pin TQFP (14x14 mm) package with industrial -40C to +85C operating temperature support. The "AT" suffix denotes tape-and-reel packaging while the "I" code indicates the industrial temperature grade and the "/PF" suffix identifies the 100-pin TQFP package. A 16-bit microcontroller (MCU) is a single-chip computer that combines a 16-bit CPU core, program memory (Flash/ROM), working memory (RAM), and a rich set of on-chip peripherals. The PIC24H sits in Microchip's mid-range 16-bit portfolio, positioned above the 8-bit PIC16/PIC18 families for higher-throughput signal-processing and control applications. The PIC24H family is software- and pin-compatible with the dsPIC33F DSC family, allowing code and PCB reuse when motor-control or DSP features are later required. Key differentiating features of the PIC24HJ256GP610AT-I/PF include 256 KB (85.5K x 24) Flash, 16 KB SRAM, a 16-channel 10-bit ADC capable of 1.1 Msps, two UART modules, two SPI modules, two I2C modules, an Enhanced CAN 2.0B module, and two 16-bit timers plus two 32-bit timers. The 40 MIPS core at 3.3V provides ample headroom for closed-loop control algorithms. The 100-TQFP footprint exposes up to 85 I/O pins, supporting parallel bus interfaces and dual analog front-end channels simultaneously. Architecturally, the PIC24HJ256GP610A device employs a 16-bit data path with 24-bit instruction words, a 7-stage pipeline, hardware multiply/divide, and a flexible interrupt controller with 5-cycle latency. The on-chip DMA controller (8-channel) offloads data movement between peripherals and RAM, freeing the CPU for control loops. The device operates from 3.0V to 3.6V and supports industrial-grade -40C to +85C ambient temperatures. Typical applications include industrial motor control (BLDC/PMSM FOC), CAN-connected automotive body and chassis ECUs, digital power conversion (SMPS control loops), medical instrumentation signal processing, multi-loop process control, and embedded graphics/HMI controllers. The combination of CAN, ADC, PWM, and 40 MIPS throughput makes it a strong fit for real-time industrial networking nodes. When designing with this part, reserve a dedicated 3.3V LDO rail (such as MCP1700) and follow Microchip's recommended 100 nF + 10 uF decoupling arrangement. Configure the FRC + PLL block to deliver 40 MIPS from an 8 MHz crystal via the FPLLIDIV:FPLLODIV chain, and ensure the Vcap pin is tied to a 10 uF low-ESR capacitor. Industrial designers should also provision the ICD/PGD/PGC pins for in-circuit programming access. This page synthesizes distributor availability, drop-in alternatives from the same PIC24H 100-TQFP family, comparison parameters, and practical design notes that extend beyond the manufacturer datasheet summary, helping engineers evaluate, select, and source the PIC24HJ256GP610AT-I/PF for production designs.

Cotización Contacto
PIC24HJ256GP610AT-I/PT - 40 MIPS 16-bit MCU, 256KB Flash TQFP-100
PIC24HJ256GP610AT-I/PT

PIC24HJ256GP610AT-I/PT - 40 MIPS 16-bit MCU, 256KB Flash TQFP-100

The Microchip Technology PIC24HJ256GP610AT-I/PT is a high-performance 16-bit microcontroller from the PIC24H family, executing up to 40 MIPS at 3.3 V and integrating 256 KB of Flash program memory (85.5K x 24) in a 100-pin TQFP (12x12) package. It is specified for the industrial -40C to +85C temperature range and ships in tape-and-reel packaging (T suffix). A 16-bit microcontroller (MCU) is a single-chip computer that processes instructions and data over a 16-bit-wide datapath, delivering higher computational throughput and better C-code density than 8-bit parts while staying lower in cost and power than 32-bit cores. Within the embedded hierarchy it sits as a sub-family of microcontrollers, which themselves belong to the broader category of embedded processors and SoCs used for control-oriented designs. MV201 families like PIC24H are aimed at applications that require deterministic, high-speed repetitive computation such as DSP filtering, motor control and sensor fusion. Key features include 16 KB SRAM, the PIC24H Harvard architecture with a wide 24-bit instruction path, an integrated DSP engine, multiple 16-bit timers, a 10/12-bit ADC up to 1.1 Msps, and the dsPIC33F pin-compatible migration path. The wide 24-bit instruction word and rich peripheral set enable efficient fixed-point DSP and PID control loops without offloading work to a coprocessor, while the 40 MIPS throughput comfortably handles multi-loop control at 4 kHz switching frequencies. The architecture uses a 17 x 17-bit hardware multiplier and a 40-bit accumulator, achieving single-cycle MAC operations that accelerate DSP kernels. A robust interrupt controller with configurable priority and vectoring supports deterministic real-time response, and the on-chip DMA engine offloads data movement between the ADC, ECAN and SPI/I2C peripherals, freeing the CPU for control-law execution. Typical applications include industrial motor control (BLDC, PMSM and ACIM drives), digital power conversion (PFC plus full-bridge control), sensor signal conditioning, automotive body electronics (when paired with the AEC-Q100 grade variant), and embedded connectivity hubs. The wide memory and DSP engine also suit audio processing, predictive maintenance vibration analysis, and grid-tied solar inverters where repetitive math dominates the workload. When designing, ensure the on-board regulator delivers a stable 3.0-3.6 V rail and respect the 100-pin TQFP layout guidelines - keep the analog AVSS/AVDD pair isolated from the noisy digital supply and place the 0.1 uF + 10 uF bulk capacitors within 6 mm of each pair to keep ADC noise low. Use the ICD 3 or MPLAB REAL ICE probe header for in-circuit debugging and boundary-scan programming. This page consolidates distributor stock, parametric drop-in alternatives, and practical design considerations not found in the bare manufacturer datasheet, helping engineers evaluate and source this MCU more efficiently.

Cotización Contacto
PIC24HJ256GP610T-I/PF - 40 MIPS 16-bit MCU 256KB Flash | Microchip
PIC24HJ256GP610T-I/PF

PIC24HJ256GP610T-I/PF - 40 MIPS 16-bit MCU 256KB Flash | Microchip

The Microchip Technology PIC24HJ256GP610T-I/PF is a 16-bit PIC24H general-purpose microcontroller delivering 40 MIPS (Million Instructions Per Second) performance, housed in a 100-pin TQFP (14x14 mm) package. It integrates 256 KB (85.5K x 24) of Flash program memory, 16 KB of RAM, and a rich peripheral set aimed at high-performance embedded control. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (RAM), and peripherals such as ADCs, timers, communication interfaces, and I/O. The PIC24H family sits in Microchip's 16-bit MCU hierarchy between the 8-bit PIC18 and the 32-bit PIC32 families, offering higher performance than 8-bit parts while remaining cost-effective and easy to migrate to from PIC24F, dsPIC30F, or dsPIC33F devices. Key features include a 16-bit modified Harvard architecture with a 16 x 16-bit single-cycle hardware multiplier, up to 41 interrupt sources with priority levels, and a 10-bit ADC at up to 1.1 Msps. Communication peripherals include UART, SPI, I2C, and ECAN modules, while dedicated motor-control PWM and a parallel master port (PMP) enable direct interface to graphics or memory peripherals. The device operates from 3.0V to 3.6V (typical 3.3V) across an industrial temperature range of -40C to +85C. The "-I" suffix denotes industrial temperature, "T" denotes tape-and-reel packaging, and "PF" indicates the 100-pin TQFP (14x14) package. This combination makes the part suitable for factory automation, motor control, and consumer applications. Typical applications include industrial motor control (BLDC, stepper, and servo), digital power conversion, sensor signal processing, USB device/host interfacing, audio processing, and graphical user interface (GUI) controllers with TFT panels. The 256 KB Flash supports complex state machines and protocol stacks such as Modbus or CANopen. When designing with the PIC24HJ256GP610T-I/PF, ensure your toolchain is the MPLAB X IDE with the XC16 compiler. Decouple VDD/VSS pairs with 100 nF ceramic capacitors placed within 5 mm of each supply pin, and route the analog AVdd/AVss separately from digital supply for ADC accuracy. This page synthesizes distributor pricing, drop-in same-package alternatives from the PIC24H family, and practical design notes not consolidated in the Microchip datasheet.

Cotización Contacto
PIC24HJ256GP610T-I/PT - 256KB Flash 16-bit MCU 40MIPs TQFP-100 | Microchip
PIC24HJ256GP610T-I/PT

PIC24HJ256GP610T-I/PT - 256KB Flash 16-bit MCU 40MIPs TQFP-100 | Microchip

The Microchip PIC24HJ256GP610T-I/PT is a high-performance 16-bit PIC microcontroller from the PIC24H family featuring 256KB of Flash program memory (85.5K x 24), 16KB of RAM, and an 85-pin I/O count, all housed in a 100-pin TQFP (12x12 mm) package. It operates at up to 40 MIPS from a 3.0V to 3.6V supply, with an industrial operating temperature range of -40C to +85C. The part is supplied in tape and reel packaging, designated by the 'T' suffix, while the 100-pin TQFP (PT) package provides generous I/O and peripheral expansion for embedded designs. A 16-bit microcontroller (MCU) is an integrated circuit that combines a CPU, program memory (typically Flash), data memory (RAM), and on-chip peripherals (timers, ADC, communication blocks) into a single silicon die. PIC24H MCUs use a modified Harvard architecture with a 16-bit data path and 24-bit instruction word, balancing deterministic interrupt response with high computational throughput suitable for real-time control, digital signal processing pre-processing, and complex communication stacks. Compared with 8-bit MCUs, PIC24H parts deliver higher code density, larger addressable memory, and richer peripheral integration while retaining the same peripheral library architecture as dsPIC33F devices. Key features of this part include 256KB of self-programmable Flash with code protection, 16KB SRAM, a 16-channel 10-bit/12-bit ADC (configuration dependent), multiple UART/SPI/I2C peripherals, a 16-bit timer/capture/compare/PWM block, DMA for CPU-offload data movement, and a Real-Time Clock Calendar (RTCC) with external 32.768 kHz crystal support. The 85 I/O pins tolerate 5V input and are 5V output capable on the digital periphery, easing mixed-voltage interfacing to legacy peripherals and sensors. Architecturally, the PIC24HJ256GP610T-I/PT uses the proven PIC24H core running at 40 MIPS, with a 2-cycle hardware multiply and a divide engine supporting 32-bit math in hardware. A 17-bit x 17-bit single-cycle MAC, 16-bit barrel shifter, and zero-overhead DO/REPEAT loops accelerate DSP-style filtering and PID control loops, while the DMA controller moves ADC samples and UART data without CPU intervention. Typical applications include BLDC and PMSM motor control, industrial sensor signal conditioning, UPS inverter controllers, building automation HVAC controllers, industrial-grade human-machine interface (HMI) panels, and low-cost audio effects processing. The wide peripheral set and large Flash also suit protocol bridges (e.g. Modbus to CAN) and multi-master communitative scheduling. When designing with this part, ensure that the 100-pin TQFP land pattern has adequate thermal copper, that AVdd and AVss are cleanly decoupled, and that the 32.768 kHz SOSC crystal load capacitors match the chosen crystal's CL spec. For motor control applications, pair this MCU with a Microchip MCP8024 or TC2xxx gate driver and use the dedicated PWM/ADC trigger routing shown in the datasheet for deterministic current sampling. This page synthesizes distributor pricing from DigiKey, drop-in same-package alternatives within the PIC24H family, and practical design notes that go beyond the datasheet's pin table - including thermal and crystal-layout guidance tailored to industrial motor control.

Cotización Contacto
PIC24HJ32GP202-E/MM - 16-bit 40MIPS MCU, 32KB Flash | Microchip
PIC24HJ32GP202-E/MM

PIC24HJ32GP202-E/MM - 16-bit 40MIPS MCU, 32KB Flash | Microchip

The Microchip PIC24HJ32GP202-E/MM is a 16-bit PIC24H microcontroller with 40 MIPS CPU performance, 32 KB program Flash, 2 KB RAM, and a 1 KB auxiliary Flash block, housed in a 28-pin QFN-S (6x6 mm) package with an exposed thermal pad. The device operates from 3.0 V to 3.6 V and is qualified to the automotive AEC-Q100 standard via its extended-temperature (-40C to +125C) "-E" ordering code suffix. A 16-bit microcontroller (MCU) is a microprocessor core that processes data in 16-bit words, sitting between 8-bit MCUs (lower cost, lower throughput) and 32-bit MCUs (higher performance, larger code). Within the broader microcontroller family, the PIC24H belongs to the Microchip 16-bit PIC24 MCU family -> 16-bit MCU class -> microcontroller -> embedded processor hierarchy. The PIC24HJ32GP202-E/MM is part of the PIC24HJ32GP202/204 sub-family that is pin-compatible with the dsPIC33F DSC family, enabling easy migration when DSP capability is later required. Key features of this part include one 16-bit timer, two UARTs, one SPI, one I2C, a 10-bit ADC with up to 9 channels, a comparator, and 21 digital I/O pins. It uses a 16-bit modified Harvard architecture with a 24-bit instruction word and a variable-length opcode field, achieving 40 MIPS at 40 MHz. Internal Phase-Locked Loop (PLL) support lets a low-frequency external crystal generate the full 40 MIPS CPU clock while reducing system cost. Typical end products are high-friction op-amp driver circuits, motor-control sensor interfaces, automotive body modules, industrial sensor hubs, and low-power instrumentation. When designing with this part, ensure VDDCORE decoupling uses a low-ESR 10 uF bulk + 0.1 uF ceramic pair, and route the exposed thermal pad to a continuous ground plane for thermal dissipation.

Cotización Contacto
PIC24HJ32GP202-E/SP - 16-bit 40MIPS 32KB Flash MCU | Microchip
PIC24HJ32GP202-E/SP

PIC24HJ32GP202-E/SP - 16-bit 40MIPS 32KB Flash MCU | Microchip

The Microchip Technology PIC24HJ32GP202-E/SP is a high-performance 16-bit microcontroller from the PIC24H family, featuring a 16-bit (data) modified Harvard architecture with an enhanced instruction set and addressing modes. Housed in a 28-pin SPDIP (Skinny Plastic Dual In-line Package, .SP = SPDIP) through-hole package, this MCU delivers 40 MIPS (Million Instructions Per Second) CPU performance, 32 KB of Flash program memory, and 21 general-purpose I/O lines. The integrated peripherals include ADC channels, DMA channels, PWM channels, and a 16-bit timer architecture suitable for real-time control. A microcontroller (MCU) is a single-chip computer containing a CPU core, program and data memory, peripherals, and I/O ports, designed to execute embedded firmware in real-time systems. The PIC24H architecture sits in the hierarchy: 16-bit MCU -> modified Harvard architecture -> PIC24 family -> 8-bit PIC derivatives. Compared with 8-bit PIC MCUs, the PIC24HJ32GP202 offers DSP-friendly instructions, single-cycle hardware multiply, and a deterministic interrupt latency of 5 cycles, enabling high-speed motor control, digital power conversion, and signal-processing applications. Key features include 40 MHz maximum operating frequency with 40 MIPS throughput, 32 KB self-programmable Flash with EEPROM emulation, 2 KB SRAM, 16-channel 10-bit ADC with 500 ksps conversion rate, and dual analog comparators. The device also integrates an 8-channel DMA controller, up to 4 output compare/PWM channels, and three 16-bit timers with cascadable operation. The 28-pin SPDIP package provides easy through-hole prototyping compatibility with breadboards and standard IC sockets. Typical applications include industrial motor control (BLDC, PMSM, stepper), digital power conversion (PFC, LLC), sensor signal processing, LED lighting control, and medical instrumentation. The wide operating voltage range of 3.0V to 3.6V and industrial-grade -40C to +125C operating temperature suit industrial environments. The pin-compatibility with the dsPIC33F DSC family enables migration paths for designs that later require DSP capability. When designing with this device, ensure decoupling capacitors (100 nF and 10 uF) are placed as close to VDD/VSS pins as possible, follow the in-circuit serial programming (ICSP) layout guidelines for production programming, and use the JTAG boundary scan during prototype validation. The PIC24HJ32GP202 is an enhanced PIC24H variant (E suffix) rated for -40C to +125C extended temperature range. This page synthesizes distributor pricing, drop-in same-package alternatives, application references, and practical design notes not consolidated in the manufacturer datasheet. For design-in validation, cross-reference with Microchip application notes TB3133 (PIC24H migration), DS01026 (EASPS peripherals), and the family reference manual sections covering ADC, PWM, and DMA architecture.

Cotización Contacto
PIC24HJ32GP202-E/SS - 16-bit 40MIPS MCU, 32KB Flash | Microchip
PIC24HJ32GP202-E/SS

PIC24HJ32GP202-E/SS - 16-bit 40MIPS MCU, 32KB Flash | Microchip

The Microchip Technology PIC24HJ32GP202-E/SS is a high-performance 16-bit microcontroller from the PIC24H family, featuring a 40 MIPS CPU with a modified Harvard architecture and 32 KB of on-chip Flash program memory. The -E/SS suffix specifies the industrial extended temperature grade (-40C to +125C) in a 28-pin SSOP package, making it suitable for harsh-environment embedded designs. This part belongs to the broader category of 16-bit microcontrollers (MCUs) - programmable processors that bridge the gap between 8-bit MCUs (limited performance, simpler peripherals) and 32-bit MCUs (highest performance, more complex toolchain). 16-bit MCUs like the PIC24H family are ideal for motor control, digital power conversion, and signal processing applications that need deterministic real-time response without the cost of a 32-bit core. Key differentiating features of the PIC24HJ32GP202 include a 40 MHz operating frequency (40 MIPS throughput), 2 KB of SRAM, and a rich peripheral set comprising multiple 16-bit timers, a 12-bit A/D converter with up to 10 channels, input capture, output compare/PWM channels, and a high-speed 10-bit ADC alternative. The nanoWatt power management technology provides multiple low-power sleep modes, enabling battery-friendly designs in portable and energy-harvesting systems. Architecturally, the device uses a 24-bit instruction word with a variable-length opcode field and 16-bit-wide data paths. The modified Harvard architecture separates program and data memory buses, allowing instruction fetch and data access to occur in the same cycle - which is what delivers the deterministic 40 MIPS throughput. The pinout is pin-compatible with the dsPIC33F DSP-enabled family, providing an upgrade path to DSP functionality without PCB changes. Typical applications span BLDC and PMSM motor control (FOC and trapezoidal commutation), industrial sensors and signal conditioning, digital power conversion (SMPS, PFC), automotive body and chassis ECUs, LED lighting drivers, and consumer appliance motor and pump controllers. The extended temperature grade makes it appropriate for under-hood automotive and outdoor industrial deployments. When designing with this part, note that it requires a 3.0V to 3.6V supply and that oscillator configuration (primary or auxiliary, with PLL options) must be locked in the configuration words during programming. Decoupling must follow the datasheet's recommended layout, and unused I/O pins should be configured as outputs low to minimize power consumption. Migration to the pin-compatible dsPIC33FJ32GP202 adds DSP capability at the same cost tier.

Cotización Contacto
PIC24HJ32GP202-H/SO - 16-bit 32KB Flash MCU 40MIPS | Microchip
PIC24HJ32GP202-H/SO

PIC24HJ32GP202-H/SO - 16-bit 32KB Flash MCU 40MIPS | Microchip

The Microchip Technology PIC24HJ32GP202-H/SO is a 16-bit PIC24H microcontroller with 32KB (11K x 24) of FLASH program memory, 2KB of RAM, and 21 I/O pins housed in a 28-pin SOIC wide-body package. It executes instructions at up to 40 MIPS from a maximum 40 MHz internal oscillator and is rated for the automotive-grade -40C to +150C (H-grade) operating temperature range. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (FLASH/ROM), working memory (RAM), and peripheral interfaces such as timers, ADC, communication ports (UART/SPI/I2C), and GPIO into one IC. The PIC24H family sits in the broader PIC24/dsPIC33 16-bit DSC taxonomy (16-bit microcontroller -> 16-bit DSC -> microcontroller -> embedded processor -> semiconductor) and uses a modified Harvard architecture with a 24-bit instruction word. Designers choose PIC24H parts when 8-bit MCUs run out of headroom but 32-bit ARM Cortex-M parts are over-spec for cost or power reasons. Key features include 16-channel 10/12-bit ADC, two UART, one SPI, one I2C, two I2S, and nine 16-bit timers. The CPU includes a hardware 16 x 16 multiply, a 32/16 and 16/16 divide, and DSP-aware addressing modes inherited from the dsPIC33 family. The part is pin-compatible with the dsPIC33F family, enabling seamless migration to DSP-capable firmware without board rework. Typical applications include automotive body and chassis ECUs, industrial motor control loops, sensor conditioning front-ends, and digital power conversion. The high 40 MIPS throughput at 3.3V lets the device execute PID control loops and digital filter routines in well under one control period. The internal oscillator eliminates an external crystal on cost-sensitive designs while still supporting field-reprogramming. When designing with this part, budget for a 1.5-2.0 mA active current per MIPS and a 5 uA typical sleep current for battery-operated applications. Use the ICD 3 or PICkit 3 programmer for in-circuit debug, and verify that the H temperature grade (-40C to +150C) is required - the cheaper I-grade (-40C to +85C) PIC24HJ32GP202-I/SO variant covers most commercial use cases. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, giving engineers a faster sourcing and selection decision.

Cotización Contacto
PIC24HJ32GP202-I/SO - 40 MIPS 16-bit MCU 32KB Flash | Microchip
PIC24HJ32GP202-I/SO

PIC24HJ32GP202-I/SO - 40 MIPS 16-bit MCU 32KB Flash | Microchip

The Microchip Technology PIC24HJ32GP202-I/SO is a high-performance 16-bit microcontroller from the PIC24H family, delivering 40 MIPS throughput at 40 MHz and offering 32 KB Flash program memory in a 28-pin SOIC (SO) wide-body package with industrial -40C to +85C temperature rating. A PIC24H 16-bit MCU is a modified-Harvard microcontroller that combines a 16-bit data path with a 24-bit instruction word and a DSP-enhanced instruction set, occupying the middle ground between 8-bit PIC MCUs and 32-bit ARM Cortex-M parts in Microchip's portfolio. It targets real-time control applications that need deterministic interrupt response, on-chip peripherals for motor and power conversion, and C-compiler-efficient addressing modes. The PIC24H family is pin-compatible with the dsPIC33F DSC family, which adds hardware MAC/DSP instructions on the same core for applications such as digital filtering and sensorless motor control. Key features include 32 KB (11K x 24 words) of self-programmable Flash with ECC, 2 KB SRAM, 21 digital I/O pins, three 16-bit timers that can be paired to form a 32-bit timer, two output-capture modules, three 16-bit PWM channels, a 10-bit ADC, two UARTs, two SPI, and one I2C. The wide VDD range of 3.0 V to 3.6 V is supplied to the core while the I/O ring runs at the same rail, simplifying single-rail designs. Pin functions are remappable through Peripheral Pin Select (PPS), allowing flexible PCB routing. Architecturally the device uses a 16-bit data path with a 24-bit instruction word and dual-bus Harvard structure that allows simultaneous data and program fetches, achieving up to 40 MIPS sustained throughput. The integrated DSP engine supports fractional arithmetic and signed multiplication, enabling sensorless motor-control algorithms and digital-filter kernels without external DSP components. Typical applications include sensorless and sensored BLDC/PMSM motor drives, digital switch-mode power conversion (PFC, LLC, full-bridge), industrial sensor signal conditioning with on-chip ADC, building-automation fan/pump controllers, and HVAC compressor inverters. The 32 KB Flash and 2 KB SRAM budget suits mid-complexity state machines and control loops. An internal 8 MHz oscillator with PLL allows operation without an external crystal on cost-sensitive boards. Designers should plan VDD decoupling with a 10 uF bulk and a 100 nF ceramic placed within 5 mm of the VDD/VSS pair, and use the internal PLL configuration bits carefully because switching from FRC to the PLL-derived clock without proper sequence can cause firmware lock-up. The device is drop-in compatible with other PIC24HJ32GP202 speed grades (-I/SP, -E/SP) within the same 28-pin SOIC footprint, but only when firmware timing margins permit the temperature-grade change. This page synthesizes distributor stock data, drop-in replacement MPNs, and practical design notes that are not aggregated on a single manufacturer page.

Cotización Contacto
PIC24HJ32GP202-I/SP - 16-bit 40 MIPS 32KB Flash MCU | Microchip
PIC24HJ32GP202-I/SP

PIC24HJ32GP202-I/SP - 16-bit 40 MIPS 32KB Flash MCU | Microchip

The Microchip Technology PIC24HJ32GP202-I/SP is a 16-bit microcontroller from the PIC24H family, delivering 40 MIPS performance with 32KB (11K x 24) of program Flash memory in a 28-pin SPDIP package. The device operates from 3.0V to 3.6V and is pin-compatible with the dsPIC33F family, allowing firmware migration between the PIC and dsPIC architectures. A 16-bit microcontroller is a microprocessor whose data path, registers and ALU are 16 bits wide, offering roughly 2-4x the arithmetic throughput of 8-bit MCUs at the same clock frequency. The PIC24H family sits in Microchip's mid-range 16-bit portfolio above the PIC24F and below the dsPIC33 family. PIC24H parts share the dsPIC33F instruction set, making them ideal for control applications that demand high-speed, repetitive computations such as motor control, power conversion and digital signal preprocessing. The PIC24HJ32GP202 integrates 2KB of RAM, 21 general-purpose I/O pins, three 16-bit timers/counters (pairable into one 32-bit timer), two output capture modules and two PWM modules. Hardware peripherals include a 16-channel 10-bit 500 ksps ADC, two UART modules, two SPI interfaces and one I2C port. The CPU is a Harvard-architecture modified RISC engine with single-cycle 16x16 multiplication, zero-overhead looping and a four-deep instruction queue. Typical applications include industrial motor control (BLDC/PMSM sensorless drives), digital power conversion (PFC, LLC, full-bridge SMPS), sensor signal conditioning, automotive body and chassis ECUs, and consumer appliances requiring deterministic real-time control. The 40 MIPS core handles 100 kHz+ PWM loops while leaving headroom for communication stacks. When designing with this device, place a 10uF tantalum plus 0.1uF ceramic decoupling capacitor pair adjacent to each VDD/VSS pin pair. Maintain trace lengths below 25 mm on the external 8 MHz crystal routing to the OSC1/OSC2 pins to prevent EMI under normal switching. This page synthesizes distributor pricing, drop-in alternatives and practical design notes not consolidated on the manufacturer product page, enabling faster sourcing decisions for engineers.

Cotización Contacto
PIC24HJ32GP202-I/SS - 16-bit 40MIPS MCU 32KB Flash 28-SSOP | Microchip
PIC24HJ32GP202-I/SS

PIC24HJ32GP202-I/SS - 16-bit 40MIPS MCU 32KB Flash 28-SSOP | Microchip

The Microchip Technology PIC24HJ32GP202-I/SS is a 16-bit microcontroller from the PIC24H family, executing instructions at up to 40 milliseconds (MIPS) from a 16-bit modified Harvard architecture with a 24-bit instruction word. It integrates 32KB of Flash program memory organized as 11K x 24 words, 2KB of SRAM, and is housed in a 28-pin SSOP (Shrink Small Outline Package). The CPU module features separate Address Generation Units for read and write operations, supporting a high-speed computational engine aimed at DSP-oriented control. A 16-bit microcontroller (MCU) is a single-chip processor that executes 16-bit instructions and manipulates 16-bit data in a single cycle. It belongs to the broader category of microcontrollers -> embedded processors -> RISC microcontrollers -> mixed-signal controllers. Compared with 8-bit MCUs, 16-bit devices deliver higher arithmetic throughput, larger addressable memory, and richer peripherals, while keeping power, code density, and deterministic interrupt latency comparable. The PIC24H sits between 8-bit PIC MCUs and 32-bit MIPS/ARM cores, making it a fit for real-time control with moderate DSP load. Key features of the PIC24HJ32GP202 include 40 million instructions per second at 40 MHz, nanoWatt technology power management for low-power sleep modes, and on-chip peripherals such as 10-bit ADC, comparators, timers, PWM, UART, SPI, and I2C. The device offers 21 I/O pins with peripheral pin select flexibility, plus a 16-bit timer/counter module supporting input capture, output compare, and PWM generation. The PIC24H instruction set is pin-compatible with the dsPIC33F family, easing migration to digital signal control. The device architecture combines a 16-bit data path with a 24-bit program word, enabling single-cycle 16x16 multiply and divide operations. Internal phase-locked loop (PLL) allows operation from low-speed crystals while still reaching full 40 MIPS throughput, and the CPU supports both signed and unsigned fractional arithmetic. The Harvard bus provides deterministic instruction fetch and data access, critical for closed-loop control where jitter is unacceptable. Typical applications include industrial motor control, sensor signal conditioning, power conversion control loops, low-cost DSP pre-processing, and consumer appliances requiring responsive user interfaces. The wide peripheral mix suits brushed DC and stepper motor commutation as well as LED matrix driving. The 28-SSOP package is hand-solderable for prototypes and supports reflow for volume production. When designing, ensure decoupling capacitors of 0.5 microfarad plus 0.01 microfarad are placed within 5 millimeters of the supply pins, and configure the PLL for the desired throughput versus power budget. The nanoWatt modes reduce quiescent current to single-digit microampere ranges, suitable for battery-backed sensors. This page synthesizes distributor pricing, drop-in Microchip alternatives, and practical design notes not found in the manufacturer datasheet alone. Engineers evaluating the PIC24HJ32GP202-I/SS against PIC24F or PIC24HJ12GP202 alternatives will find a pinout-correct selection matrix with the same 28-SSOP footprint.

Cotización Contacto
PIC24HJ32GP202T-I/SS - 16-bit 32KB Flash MCU, 40MIPS, 28-SSOP | Microchip
PIC24HJ32GP202T-I/SS

PIC24HJ32GP202T-I/SS - 16-bit 32KB Flash MCU, 40MIPS, 28-SSOP | Microchip

The Microchip Technology PIC24HJ32GP202T-I/SS is a 16-bit microcontroller from the PIC24H family delivering 40 MIPS performance at up to 40 MHz CPU clock, integrating 32 KB Flash program memory and 2 KB SRAM in a 28-pin SSOP package. It is supplied from 3.0 V to 3.6 V with 21 general-purpose I/O pins and an integrated 12-bit ADC with multiple analog front-end options. What is a 16-bit MCU? A 16-bit microcontroller is a programmable embedded processor whose arithmetic logic unit operates on 16-bit wide data words, bridging the gap between 8-bit legacy MCUs and 32-bit Cortex-class devices. The PIC24H family sits within Microchip's broader microcontroller taxonomy (MCU -> 16-bit MCU -> PIC24H -> digital signal controller family), and shares pin compatibility with the dsPIC33F DSC family. This positioning makes PIC24HJ32GP202T-I/SS suitable for high-speed repetitive computation and closed-loop control tasks that exceed 8-bit headroom but do not require a full 32-bit core. Key features of the PIC24HJ32GP202T-I/SS include three 16-bit timer/counters that can be paired to form one 32-bit timer, two output-capture channels, and multiple PWM/Input Capture peripheral options. The integrated 12-bit A/D converter (ADC) supports advanced analog sampling for sensor-conditioning tasks. With 21 I/O and DMA channels the device supports parallel data movement without CPU intervention, enabling deterministic real-time performance for motor, power-conversion, and sensor-fusion control loops. Architecturally, the PIC24HJ32GP202T-I/SS uses a 16-bit modified Harvard core with separate program and data buses, an 8-stage pipeline, and Hardware Multiply/Divide units that compute 16x16-bit multiplications in a single cycle. This combination of architecture and peripheral set explains the part's long-standing use in industrial drives, motor-control, UPS, switched-mode power supply (SMPS) digital control, and consumer appliance control boards where 8-bit performance would create a bottleneck. Typical applications include industrial motor control (BLDC, PMSM, stepper), digital power conversion (PFC, LLC, full-bridge converters with peak current-mode control), sensor signal conditioning, HVAC fan and compressor controllers, and general-purpose 16-bit embedded control nodes. The wide operating temperature range (-40C to +85C, industrial grade, denoted by the -I suffix) also suits outdoor and automotive under-hood subsystems. When designing with the PIC24HJ32GP202T-I/SS, ensure the VDDCORE pin is decoupled with a 10 uF bulk capacitor plus a 0.1 uF high-frequency ceramic, and place the AVDD analog supply filter (ferrite bead + 10 uF + 0.1 uF) close to the analog VDD/VSS pair. The -I/SS suffix denotes industrial temperature grade and SSOP package; the trailing 'T' in PIC24HJ32GP202T indicates Tape & Reel packaging. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the standalone Microchip datasheet.

Cotización Contacto
PIC24HJ32GP204-E/PT - 16-bit 40 MIPS 32KB Flash MCU | Microchip
PIC24HJ32GP204-E/PT

PIC24HJ32GP204-E/PT - 16-bit 40 MIPS 32KB Flash MCU | Microchip

The Microchip Technology PIC24HJ32GP204-E/PT is a 16-bit PIC24H microcontroller delivering 40 MIPS performance at 40 MHz, with 32 KB (11K x 24) of Flash program memory and 2 KB of SRAM, housed in a 44-pin TQFP (10x10 mm) package. It is designed for high-speed repetitive computation and digital control, sharing pin compatibility with the dsPIC33F family of devices and using a 16-bit modified Harvard CPU that supports a 24-bit instruction word with variable-length opcode fields. The 'E' suffix indicates the extended industrial temperature grade of -40C to +125C. A PIC24H 16-bit microcontroller is a member of Microchip's 16-bit MCU family built on a modified Harvard architecture. It combines a 16-bit data path with a 24-bit instruction path, which improves code density for C compilers while supporting DSP-style addressing modes. PIC24H devices sit in the hierarchy MCU -> 16-bit MCU -> PIC24H family -> microcontroller -> embedded processor, and they target applications requiring deterministic real-time control at moderate clock rates without the cost of higher-performance 32-bit parts. Key features include 21 digital I/O pins with peripheral pin select (PPS) functionality, 5V-tolerant inputs, 4 mA sink/source capability, and open-drain outputs capable of pulling up to 5V. The device integrates three 16-bit timers (pairable into one 32-bit timer), two output compare modules, an input capture module, two UART, SPI, and I2C peripherals, a 10/12-bit ADC, and a 16-bit comparator. The PPS block remaps most digital peripherals to a wide choice of pins, simplifying PCB routing and BOM consolidation. The 40 MIPS core, hardware multiplier, and zero-overhead loop control make the PIC24HJ32GP204-E/PT suitable for digital control loops, sensor signal processing, and communication bridges. Its instruction set is optimized for compiled C, which lowers firmware development cost versus legacy 8-bit PIC architectures while retaining Microchip's ecosystem of MPLAB X IDE, MPLAB XC16 compiler, and dsPIC/PIC24 plug-in modules. Typical applications include industrial sensor signal conditioning, motor control pre-drivers, HVAC fan and pump controllers, building-automation nodes, point-of-sale terminals, and medical instrumentation front-ends. The combination of 32 KB Flash, 2 KB RAM, and 5V-tolerant I/O enables direct interfacing to legacy 5V sensors and actuators without external level shifters. When designing with this part, verify that the chosen 44-pin TQFP footprint exposes the required VDD/VSS pair counts and the dedicated PGED/PGEC programming pins. Place a 10 uF bulk + 0.1 uF decoupling capacitor pair adjacent to each VDD pin and keep the analog reference traces short and guarded. This page synthesizes distributor pricing, parametric cross-references, and engineering-oriented application guidance not found on the standalone Microchip datasheet, providing decision-ready data for new designs and re-spins.

Cotización Contacto