Microcontroladores

Productos (18730)

PIC24HJ32GP204-I/PT - 40 MIPS 16-bit MCU, 32KB Flash | Microchip
PIC24HJ32GP204-I/PT

PIC24HJ32GP204-I/PT - 40 MIPS 16-bit MCU, 32KB Flash | Microchip

The Texas Instruments...wait—correction: the Microchip Technology PIC24HJ32GP204-I/PT is a 16-bit microcontroller from the PIC24H family running up to 40 MIPS with 32 KB Flash and 2 KB SRAM, housed in a 44-pin TQFP (10x10 mm) package. It operates from 3.0V to 3.6V and is pin-compatible with the dsPIC33F family, sharing a high degree of compatibility with dsPIC30F devices. This makes it a versatile choice for embedded designs requiring both MCU control and DSP-capable signal processing on the same footprint. A PIC microcontroller is a programmable, low-cost integrated circuit based on a Harvard-architecture CPU with on-chip Flash, RAM, peripherals (UART, SPI, I2C, ADC, timers) that implements an embedded control system. The PIC24H family specifically delivers 16-bit data paths with up to 40 MIPS performance—roughly an order of magnitude faster than the 8-bit PIC16/PIC18 families—while staying in the same development ecosystem (MPLAB X IDE, XC16 compiler, ICD programmers). PIC24H sits within the broader taxonomy: microcontroller -> embedded MCU -> semiconductor. Key features of the PIC24HJ32GP204-I/PT include 35 I/O pins, three 16-bit timers (which can pair into one 32-bit timer), two UART modules, two SPI interfaces, one I2C interface, a 10/12-bit ADC with up to 13 channels, and a 16-bit input capture / output compare peripheral set. The wide 3.0–3.6V Vdd range, industrial -40C to +85C temperature grade, and JTAG/ICSP in-circuit debugging streamline both prototyping and field deployment. At the architectural level, the device uses a 16-bit modified-Harvard core with a hardware multiply-accumulate (MAC) block (inherited from dsPIC) and zero-overhead looping, enabling efficient DSP-style algorithms such as FIR/IIR filtering, motor control PWM generation, and real-time control of three-phase inverters. The 32 KB self-programmable Flash and 2 KB SRAM are sufficient for many real-time control firmware builds, while peripheral pin-select remapping eases IO routing. Typical applications include industrial motor control (BLDC/PMSM), digital power conversion (SMPS), advanced sensor interfacing, audio processing, and general-purpose 16-bit embedded control. The 16-bit ADC and PWM pairs also suit digitally-controlled lighting and uninterruptible power supplies (UPS). Design tip: ensure that MCLR is pulled high through a 10 kohm resistor and that AVDD/AVSS are tied to VDD/VSS with a ferrite bead + decoupling capacitor for best ADC noise performance. Decoupling should include a 100 nF per VDD pin and a bulk 10 uF near the package. This page synthesizes distributor pricing, drop-in alternatives in the same TQFP-44 footprint, and practical design notes beyond the manufacturer datasheet.

Cotización Contacto
PIC24HJ32GP204T-I/ML - 16-bit 40 MIPS 32KB Flash MCU | Microchip
PIC24HJ32GP204T-I/ML

PIC24HJ32GP204T-I/ML - 16-bit 40 MIPS 32KB Flash MCU | Microchip

The Microchip Technology PIC24HJ32GP204T-I/ML is a 16-bit microcontroller from the PIC24H family, delivering 40 MIPS performance with 32KB (11K x 24 instructions) of Flash program memory and packaged in a 44-pin QFN (8x8 mm) with exposed pad. It operates from a 3.0V to 3.6V supply, runs at up to 40 MHz internal oscillator, and integrates 4KB RAM plus 1KB EEPROM-like data Flash. The device is tape-and-reel packaged ('T' suffix) in the -40C to +85C industrial temperature range ('-I'), and ships in the 'ML' 44-VQFN-EP land pattern. What is a PIC24H microcontroller? A PIC24H is a 16-bit modified-Harvard MCU from Microchip, sitting in the hierarchy: PIC24H -> PIC24 family -> 16-bit MCU -> microcontroller -> embedded processor. PIC24H devices target high-speed control loops, DSP-style math, and motor/lighting/Power Conversion control, and are pin-compatible with the dsPIC33F family so designers can migrate from a MCU-only solution to a full DSP solution by swapping silicon with no PCB change. The 40 MIPS throughput lets a single device execute PID, PLL, and field-oriented-control software with comfortable margin. Key features of the PIC24HJ32GP204T-I/ML include 16 10-bit ADC channels (500 ksps), two UART modules, two SPI modules, two I2C modules, two analog comparators with programmable reference, five 16-bit timers (Timer1 through Timer5 plus Timer2/3 pairs), a hardware RTCC, a Parallel Master Port (PMP), and CTMU charge-time measurement unit for capacitive touch and current measurement. The 44-QFN-EP exposed pad gives a thermal resistance near 28 C/W with proper PCB thermal vias, and the Part has a built-in JTAG/ICD port for in-circuit debugging. Architecturally the part uses a 16-bit data path with a 24-bit instruction word, single-cycle MAC via the DSP engine, a 16 x 16-bit register file, and zero-overhead looping hardware. DMA is not present on this 32 KB flash sub-family (it appears on the larger PIC24HJ128/HJ256 variants), so high-bandwidth peripheral use cases depend on the 4 KB RAM and tight ISR coding. The CPU supports 16 x 16 signed fractional multiplication in one cycle, which is what enables the 40 MIPS figure and the family name 'H' (high performance). Typical applications for the PIC24HJ32GP204T-I/ML include AC-DC and DC-DC Power Conversion digital control loops, BLDC/PMSM/Stepper motor control FOC firmware, LED lighting drivers with DMX or DALI, Industrial sensor conditioning with CTMU capacitive touch, USB device firmware stacks via the on-chip full-speed USB-less architecture (use external transceiver), and AEC-Q100 demanding General-purpose 16-bit control where 8-bit MCUs run out of headroom. When designing with this device, pay close attention to the 3.0V to 3.6V rail - the part is NOT 5V tolerant on most I/O. Use the internal 7.5 MHz FRC with PLL to generate the 40 MHz system clock, and always provide the exposed pad thermal pad with 0.1 mm thermal vias for 28 C/W theta_JA performance. Place a 10 uF plus 0.1 uF decoupling pair within 5 mm of VDD/LDO pins. The PIC24HJ32GP204T-I/ML is an active production status part, available at major distributors with multi-thousand-piece stock. This page synthesizes DigiKey and Mouser real-time pricing, pin-compatible drop-in alternatives from Microchip's same family, and engineering design notes not aggregated on any single distributor page.

Cotización Contacto
PIC24HJ32GP302-E/SO - 16-bit 40 MIPS MCU, 32KB Flash, 28-SOIC | Microchip
PIC24HJ32GP302-E/SO

PIC24HJ32GP302-E/SO - 16-bit 40 MIPS MCU, 32KB Flash, 28-SOIC | Microchip

The Microchip Technology PIC24HJ32GP302-E/SO is a high-performance 16-bit microcontroller from the PIC24H family, featuring a 40 MIPS CPU core, 32 KB of Flash program memory, 2 KB of SRAM, and a 28-pin SOIC (Wide, 0.300") package. It is specified for the extended -40C to +125C industrial operating range and runs from a 3.0V to 3.6V supply. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, volatile data memory, and a rich set of on-chip peripherals such as timers, ADC modules, communication controllers, and I/O pins. Within the broader semiconductor taxonomy, an MCU belongs to: microcontroller -> embedded processor -> digital IC -> semiconductor. The PIC24H family targets high-speed control and DSP-like signal processing loops at low power, competing in the industrial and automotive control markets. Key features include a 16-bit modified Harvard architecture CPU capable of 40 MIPS throughput at 40 MHz, three 16-bit timers/counters that can be paired to form one 32-bit timer, two output-capture modules, hardware DMA, and the proprietary nanoWatt power-management technology. The device provides 21 general-purpose I/O pins, multiple serial interfaces (UART, SPI, I2C), a 12-bit ADC, and an RTCC for real-time clock duties. The PIC24HJ32GP302-E/SO is pin-compatible with the dsPIC33F family, allowing firmware migration between motor-control and general-purpose variants on the same PCB. Its 40 MIPS performance and integrated DMA make it suited to closed-loop control and repetitive signal-processing tasks, while the nanoWatt technology keeps idle consumption low for battery-backed applications. Typical applications include industrial motor control, switched-mode power supply (SMPS) digital control, automotive body and sensor conditioning, sensor signal processing, and consumer devices requiring deterministic real-time response. Designers also use the part for LED lighting controllers and small medical instrumentation. When designing with this MCU, reserve one or two I/O pins for in-circuit serial programming (ICSP) and ensure decoupling of VDD/VCAP/AVDD per the datasheet, because the internal regulator requires a low-ESR bulk capacitor on VCAP. This page synthesizes distributor pricing, drop-in alternatives, and design notes not found in the manufacturer datasheet. This page synthesizes distributor pricing, pin-compatible alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
PIC24HJ32GP302-E/SP - 16-Bit MCU 32KB Flash 40MIPS | Microchip
PIC24HJ32GP302-E/SP

PIC24HJ32GP302-E/SP - 16-Bit MCU 32KB Flash 40MIPS | Microchip

The Microchip Technology PIC24HJ32GP302-E/SP is a 16-bit PIC24H microcontroller delivering 40 MIPS at 3.0 V to 3.6 V, with 32 KB (11K x 24) Flash program memory, 2 KB SRAM, and 21 I/O pins in a 28-pin SPDIP (0.300 inch) package. It is an extended-temperature (-40C to +125C) device from the Automotive, AEC-Q100, PIC 24H series. A microcontroller (MCU) is a self-contained integrated circuit that combines a processor core, program memory, data memory, and configurable peripherals on a single die. Within the semiconductor taxonomy, the PIC24HJ32GP302 sits at MCU -> 16-bit microcontroller -> embedded processor -> integrated circuit. The PIC24H family uses a modified Harvard RISC architecture with a 16-bit data path and 24-bit instruction words, executing most instructions in a single cycle for deterministic, high-speed repetitive computation and control loops. Key features include 40 MIPS operation, 32 KB Flash with 11K x 24 organization, 2 KB SRAM, a 10-bit ADC with advanced analog peripherals, three 16-bit timers/counters (pairable into one 32-bit timer), two output capture channels, DMA support, and nanoWatt power management. The device is pin compatible with the dsPIC33F family and highly compatible with dsPIC30F devices, enabling straightforward migration paths. The PIC24H core uses a 24-bit instruction word with a 16-bit data path, giving efficient C compiler code density while retaining single-cycle multiply and hardware divide. The nanoWatt architecture provides multiple sleep and idle modes for battery-powered and always-on control applications. Typical applications include industrial motor control, automotive body electronics, sensor fusion nodes, and instrumentation where deterministic interrupt latency and AEC-Q100 qualification matter. The 28-pin SPDIP package suits through-hole prototyping and socketed production. When designing with this device, decouple VDD pins with 0.1 uF ceramic capacitors placed close to the pins, and reserve the MCLR pin for in-circuit serial programming (ICSP). This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto
PIC24HJ32GP302-I/SP - 16-bit 40MIPS 32KB Flash MCU | Microchip
PIC24HJ32GP302-I/SP

PIC24HJ32GP302-I/SP - 16-bit 40MIPS 32KB Flash MCU | Microchip

The Microchip Technology PIC24HJ32GP302-I/SP is a 16-bit microcontroller from the PIC24H family, delivering 40 MIPS performance, 32 KB on-chip Flash, and 4 KB SRAM in a 28-pin SPDIP package. Operating from 3.0V to 3.6V, the device integrates a 12-bit ADC, multiple 16-bit timers, DMA, UART, SPI, and I2C peripherals, making it suitable for industrial, motor-control, and high-speed sensor front-end designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, data memory, and peripheral interfaces. The PIC24H family uses a 16-bit modified-Harvard architecture optimized for deterministic interrupt response and high-throughput DSP-style arithmetic, sitting between 8-bit PIC MCUs and the higher-end dsPIC33F/dsPIC33E families in Microchip's portfolio. Key features of the PIC24HJ32GP302 include 40 MIPS CPU throughput at 40 MHz system clock, 32 KB Flash program memory (11K x 24 words), 4 KB SRAM, an integrated 12-bit A/D converter with up to 13 input channels, and a Direct Memory Access (DMA) controller that offloads data movement from the core. Three 16-bit timers (which can be paired to form one 32-bit timer) support capture, compare, and PWM operations, while two UART, two SPI, and one I2C bus provide flexible serial connectivity. The architecture uses a 16-bit datapath with hardware multiply/divide, a 24-bit instruction word, and a 16-element working register array. The DMA engine has eight channels capable of moving data between peripherals and memory without CPU intervention, dramatically improving throughput for ADC, UART, and SPI streams. The integrated 12-bit ADC offers up to 500 ksps conversion with multiple trigger sources, and the ECAN module (where present on related variants) supports CAN 2.0B communication. Typical applications include industrial control, BLDC/PMSM motor drives, sensor signal processing, LED lighting controllers, HVAC systems, and consumer appliances. The 28-SPDIP form factor is also breadboard-friendly for prototype development, university lab work, and educational kits where through-hole soldering is preferred. When designing with this part, note that the SPDIP-28 footprint supports hand-soldering and IC-socket insertion but requires a wider PCB than surface-mount equivalents. Use MPLAB X IDE with the XC16 compiler for firmware development, and consider PIC24HJ32GP302-I/SO (SOIC-28) or PIC24HJ32GP302-I/MM (QFN-28) variants if the SPDIP footprint is too large for the target board. This page synthesizes distributor pricing, drop-in alternatives within the PIC24H family, and practical design notes not aggregated in a single place on the manufacturer datasheet.

Cotización Contacto
PIC24HJ32GP302T-I/MM - 40 MIPS 16-bit MCU, 32KB Flash | Microchip
PIC24HJ32GP302T-I/MM

PIC24HJ32GP302T-I/MM - 40 MIPS 16-bit MCU, 32KB Flash | Microchip

The Microchip PIC24HJ32GP302T-I/MM is a 16-bit microcontroller from the PIC24H family, delivering 40 MIPS performance at up to 40 MHz CPU clock, with 32 KB (11K x 24) of Flash program memory and 4 KB of RAM, housed in a 28-pin QFN-S (6x6 mm) package with exposed pad. It operates from 3.0 V to 3.6 V across an industrial -40C to +85C temperature range. A 16-bit microcontroller (MCU) is an integrated processor core that executes arithmetic and logical operations on 16-bit-wide data paths, occupying a middle tier in the embedded hierarchy: 16-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. PIC24H devices employ a modified Harvard architecture with a 16-bit data path and 24-bit instruction word, optimized for DSP-style computation loops and high-speed control applications. PIC24H IS also known as "dsPIC33F compatible" because the family shares pin compatibility with dsPIC33F MCUs and CISC architecture. Key specifications of the device include 21 general-purpose digital I/Os, three 16-bit timers/counters (which can be paired to form one 32-bit timer), two output capture modules, and two UART modules. The following features distinguish it: an integrated 10/12-bit ADC with up to 500 ksps throughput, hardware multiplier for DSP operations, and dual comparator modules. The industrial-grade -I temperature range and 28-QFN compact footprint enable space-constrained industrial designs. The architecture is a 16-bit PIC core with hardware multiply/divide and DSP extensions, supporting C-compiler-efficient instruction set. The high 40 MIPS throughput enables real-time DSP and motor control run-natives, while dual 16-bit timers provide precision event timing. The 28-QFN package includes an exposed thermal pad (EP) for low-theta-JA operation. Power-saving modes include Idle, Sleep, and Doze modes with multiple clock sources (HS, XT, EC, internal FRC). Typical applications include industrial motor control (BLDC/PMSM), digital power conversion, sensor signal conditioning, and embedded control loops. The wide peripheral set also suits medical HVAC, RFID build, and consumer audio build systems. When designing with this device, ensure the 3.3V rail is clean with at least 10uF bulk decoupling plus 0.1uF ceramic at each VDD pin. Use the exposed pad (EP) for thermal relief and connect it to ground with multiple thermal vias to maximize power dissipation capability. This page synthesizes distributor pricing (DigiKey, Mouser, LCSC), drop-in QFN-S-28 alternatives from the PIC24H family and cross-brand pin-compatible equivalents from web search, plus practical design notes not found in the manufacturer datasheet.

Cotización Contacto
PIC24HJ32GP302T-I/SO - 16-bit 40 MIPS MCU, 32KB Flash | Microchip
PIC24HJ32GP302T-I/SO

PIC24HJ32GP302T-I/SO - 16-bit 40 MIPS MCU, 32KB Flash | Microchip

The Microchip PIC24HJ32GP302T-I/SO is a 16-bit microcontroller from the PIC24H family, delivering 40 MIPS performance at 40 MHz, integrating 32 KB Flash program memory (11K x 24 words) and 4 KB RAM in a 28-pin SOIC package with industrial -40C to +85C temperature range. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O. The 16-bit class sits between 8-bit MCUs and 32-bit MCUs in the embedded hierarchy: 16-bit MCU -> microcontroller -> embedded processor -> semiconductor. PIC24H parts use a modified Harvard architecture with a 16-bit datapath, 24-bit instruction word, and a 16 x 16 hardware multiplier that completes a multiply in one cycle - giving the 40 MIPS figure. Key differentiating features include 21 remappable I/O pins (5V-tolerant with selectable open-drain and internal pull-ups), three 16-bit timers that can be paired into one 32-bit timer, two output compare modules, an input capture module, a 12-bit ADC with up to 10 channels (the JLCPCB listing references both 10-bit and 12-bit ADC modes - the PIC24HJ32GP302 is 12-bit ADC with 1 MSPS, while the PIC24HJ32GP304 variant is 10-bit), and two UART/SPI/I2C modules plus a 40 MHz device tree. The 'T' suffix denotes tape-and-reel packaging for high-volume assembly, and the 'I' grade gives industrial -40C to +85C operation. The PIC24H core uses a 5-stage pipeline with single-cycle instruction execution except for program-flow changes. DMA is supported (8-channel) and the device is pin-compatible with the dsPIC33F family of digital signal controllers, allowing designers to migrate to DSP performance without PCB rework when higher compute density is needed. Typical applications include industrial control loops, motor control (BLDC/PMSM sensorless FOC using dsPIC33F migration path), sensor conditioning front-ends, USB/serial human-machine interfaces, and general-purpose embedded control. Designers select this part when they need more performance than a PIC16 or PIC18 8-bit MCU but less than the 32-bit PIC32 class. When designing with this MCU, ensure the 3.0V to 3.6V supply is decoupled with a 10uF + 0.1uF pair at VDD/AVDD pins. Note that the SOIC-28 package exposes 21 GPIO but the die has more peripheral channels - use Peripheral Pin Select (PPS) to map functions to physical pins. Migration from PIC24HJ32GP202 (no PPS, 20 pins fewer) requires remapping, but migration to PIC24HJ32GP304 changes the ADC to 10-bit - verify before substituting.

Cotización Contacto
PIC24HJ32GP304-E/PT - 40 MIPS 16-bit MCU, 32KB Flash, 44-TQFP | Microchip
PIC24HJ32GP304-E/PT

PIC24HJ32GP304-E/PT - 40 MIPS 16-bit MCU, 32KB Flash, 44-TQFP | Microchip

The Microchip PIC24HJ32GP304-E/PT is a 16-bit microcontroller from the PIC24H family, delivering 40 MIPS CPU performance at up to 40 MHz, with 32 KB of Flash program memory and 4 KB of RAM, housed in a 44-pin TQFP (PT) package. It integrates a DMA controller, three 16-bit timers that can be paired into a 32-bit timer, two output capture modules, and a peripheral set tailored for high-speed control loops and DSP-style signal conditioning. What is a 16-bit microcontroller? A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and a rich set of peripheral interfaces (timers, ADC, communication ports). The PIC24H sits in the 16-bit MCU category — a step above 8-bit MCUs in arithmetic throughput and code density, and a step below 32-bit MCUs in raw performance. Within the taxonomy, PIC24H belongs to: microcontroller -> 16-bit MCU -> PIC24 family -> PIC24H sub-family -> digital signal control / motor control class. It is engineered for applications that demand deterministic, repetitive computation at low cost. Key features of the PIC24HJ32GP304-E/PT include: 32 KB (11K x 24) Flash, 4 KB RAM, 21 general-purpose I/O pins, an integrated 10/12-bit ADC with up to 13 channels, two UART, two SPI, one I2C, and a DMA controller with 8 channels. The “-E” suffix designates the -40°C to +125°C extended operating temperature range, which is important for industrial and automotive under-hood applications. The device runs from a 3.0 V to 3.6 V supply and is pin-compatible with the dsPIC33F family. The architecture is built on a modified Harvard structure with a 16-bit datapath, 24-bit instruction words, and a single-cycle 16x16-bit hardware multiplier. This combination delivers deterministic 40 MIPS throughput, which is well-suited to digital control loops running at 10-20 kHz where 8-bit MCUs would saturate. The DMA controller offloads data movement between peripherals and memory, freeing the CPU for compute. Typical applications include industrial motor control (BLDC, PMSM, FOC), power conversion (digital PFC, LLC resonant converters), sensor signal processing, and general-purpose embedded control where C code portability and a robust toolchain (MPLAB X, XC16) are priorities. Design considerations: the 44-pin TQFP has an exposed thermal pad that should be soldered to a ground pour to reduce thermal resistance. Decoupling requires 100 nF ceramic capacitors placed as close as possible to every VDD/VSS pair, plus a bulk 10 µF tantalum or ceramic capacitor on the main rail. For applications that exceed 30 MIPS sustained throughput, ensure VDD does not droop below 3.0 V under peak transient load. This page synthesizes drop-in compatible same-package PIC24 variants, current distributor pricing as of 2026-09-30, AEO-optimized FAQs, and design notes that complement — but do not replace — the official Microchip PIC24HJ32GP304 family datasheet.

Cotización Contacto
PIC24HJ32GP304-I/ML - 16-bit 40MIPS 32KB Flash MCU | Microchip
PIC24HJ32GP304-I/ML

PIC24HJ32GP304-I/ML - 16-bit 40MIPS 32KB Flash MCU | Microchip

The Microchip Technology PIC24HJ32GP304-I/ML is a 16-bit microcontroller from the PIC24H family, delivering up to 40 MIPS throughput at 40 MHz with 32 KB of Flash program memory and 4 KB of RAM, packaged in a 44-pin QFN (8x8 mm). It features an integrated DMA controller, multiple 16-bit timers, a 12-bit ADC, and communication peripherals including UART, SPI, and I2C, all on a modified Harvard architecture with a 24-bit instruction word. A 16-bit microcontroller is a single-chip processor that executes instructions on 16-bit-wide data while typically using a richer instruction set than 8-bit MCUs, sitting in the embedded hierarchy between "microcontrollers" and the application "digital signal controller (DSC)". The PIC24H family occupies the performance tier immediately above PIC24F parts and below dsPIC33F DSC devices, targeting applications that demand high-speed repetitive computation combined with deterministic control. This positions the part in the broader taxonomy: MCU -> microcontroller -> embedded processor -> semiconductor. Key differentiating features include 32 KB of self-programmable Flash with 11K x 24 organization, hardware DMA with multiple sources, dual 16-bit timers that can pair into a 32-bit timer, three 16-bit timers in total, and rich analog capability through a 12-bit A/D converter. The wide operating voltage range of 3.0 V to 3.6 V with industrial -40C to +85C temperature support makes this part suited for harsh environments. The PIC24HJ32GP304 architecture combines a 16-bit data path with a 24-bit instruction word and a variable-length opcode field, executing most instructions in a single cycle. This modified Harvard approach yields deterministic timing critical for motor control, power conversion, and DSP-adjacent signal processing, while keeping C-language compilation efficient. The 40 MIPS throughput supports real-time control loops and high-bandwidth communication stacks simultaneously. Typical applications include industrial motor control, switch-mode power supply (SMPS) digital control loops, sensor signal conditioning with on-chip DSP-like math, automotive body and chassis subsystems, and embedded communication gateways. The on-chip DMA and 40 MIPS throughput also suit this part for medical instrumentation front-ends and remote sensor nodes that must run a full TCP/IP stack while servicing time-sensitive I/O. When designing with this device, allocate decoupling capacitance close to every VDD/VSS pair, route the 40 MHz crystal traces with short, symmetric layout, and reference the PIC24H Family Reference Manual for peripheral configuration. Plan for code-size growth by reserving the upper Flash page for bootloader or EEPROM emulation, as the part does not contain a dedicated EEPROM array. This page synthesizes distributor pricing, same-family and cross-package drop-in alternatives from the PIC24H/dsPIC33F family, and practical design notes that complement the manufacturer datasheet rather than restate it.

Cotización Contacto
PIC24HJ32GP304-I/PT - 16-bit 40MHz 32KB Flash MCU | Microchip
PIC24HJ32GP304-I/PT

PIC24HJ32GP304-I/PT - 16-bit 40MHz 32KB Flash MCU | Microchip

The Microchip Technology PIC24HJ32GP304-I/PT is a 16-bit microcontroller from the PIC24H family, providing 32 KB of Flash program memory, 4 KB of RAM, and CPU performance up to 40 MIPS at 40 MHz. It is housed in a 44-pin TQFP (10x10 mm) package and operates from a 3.0 V to 3.6 V supply. The device integrates a 16-channel 12-bit ADC, three 16-bit timers that can pair to form a 32-bit timer, two output compare modules, an 8-channel DMA controller, and up to 21 digital I/O pins. A 16-bit microcontroller is a single-chip computer that processes data 16 bits at a time, sitting in the hierarchy between 8-bit MCUs and 32-bit ARM-class cores. The PIC24H architecture is a 16-bit modified Harvard RISC design with a 16-bit data path and 24-bit instruction word, optimized for deterministic real-time control. Within the broader taxonomy, PIC24H belongs to the 16-bit MCU tier of the microcontroller semiconductor category. Key features include hardware DMA that offloads data movement from the CPU, a 12-bit ADC with 500 ksps throughput, dual analog comparators, and a charge time measurement unit (CTMU) for capacitive touch or accurate timing. Communication peripherals cover UART, SPI, I2C, and ECAN, providing flexibility for both sensor interfaces and industrial fieldbus integration. The CTMU and DMA pair especially well for low-jitter sensor sampling. Typical applications include industrial automation, motor control (BLDC, PMSM, and stepper), intelligent sensor systems, building automation HVAC controllers, and digital power conversion control loops. The wide peripheral set and DMA engine allow the CPU to focus on control-loop math rather than data shuffling. When designing with the PIC24HJ32GP304-I/PT, ensure that the 3.3 V rail is well-regulated and that decoupling capacitors sit close to the VDD/VSS pairs. Use the ECAN module for CAN-bus nodes, the CTMU for capacitive touch sensing, and the DMA controller for high-throughput ADC-to-memory transfers. This page synthesizes distributor pricing, verified drop-in alternatives, and practical design guidance not found in the manufacturer datasheet, providing a compact, citation-ready reference for engineering selection.

Cotización Contacto
PIC24HJ32GP304T-I/ML - 40 MIPS 16-bit MCU 32KB Flash | Microchip
PIC24HJ32GP304T-I/ML

PIC24HJ32GP304T-I/ML - 40 MIPS 16-bit MCU 32KB Flash | Microchip

The Microchip PIC24HJ32GP304T-I/ML is a high-performance 16-bit microcontroller from the PIC24H family, delivering up to 40 MIPS at 40 MHz with 32 KB of Flash program memory and 2 KB of SRAM in a 44-pin QFN (8x8 mm) exposed-pad package. It features 21 general-purpose I/O pins, a DMA controller, three 16-bit timers/counters that can pair into one 32-bit timer, two output compare modules, and an 8-channel 10/12-bit ADC with on-chip references. The device operates from 3.0 V to 3.6 V and is specified over the industrial -40 C to +85 C range. A 16-bit microcontroller (MCU) is a single-chip computer with a 16-bit datapath, registers, and ALU, sitting between 8-bit MCUs and 32-bit MCUs in capability. Within the power-management hierarchy it belongs to embedded processing; in the system hierarchy it sits below the application processor and above simple peripherals. PIC24H MCUs target high-speed control loops, motor control, and DSP-style signal processing where an 8-bit MCU would be too slow but a 32-bit Cortex-M part would be overkill. Key features include single-cycle 16x16 multiply, hardware DMA for CPU offload, JTAG and ICSP debug interfaces, an extended instruction set with DSP addressing modes, and pin-compatibility with the dsPIC33F family. The 44-QFN package provides a compact 8x8 mm footprint with an exposed thermal pad that lowers junction-to-board thermal resistance for high-MIPS continuous operation. Architecturally, the PIC24HJ32GP304 uses a modified Harvard core with separate program and data paths, a 24-bit instruction word, and zero-wait-state Flash access at 40 MHz. The peripheral set is the same as the dsPIC33F family, allowing code migration and reuse of software libraries, including Microchip's MPLAB XC16 toolchain. Typical applications include industrial motor control (BLDC, PMSM, stepper), digital power conversion, sensor processing, automotive body electronics, and consumer audio processing. The 40 MIPS performance and DMA controller make it well suited to closed-loop control applications that sample multiple ADC channels every cycle. When designing with this part, allocate the exposed pad (EP) to a solid copper pour stitched with vias for thermal dissipation, since sustained operation at 40 MIPS can dissipate noticeable power. Validate code timing against the device's instruction-cycle count rather than source-line counts, because the PIC24H executes one instruction per two clock cycles at full speed. This page synthesizes distributor pricing, pin-compatible drop-in alternatives, application recommendations, and practical design notes that go beyond a typical distributor listing.

Cotización Contacto
PIC24HJ32GP304T-I/PT - 16-bit 40MIPS 32KB Flash MCU | Microchip
PIC24HJ32GP304T-I/PT

PIC24HJ32GP304T-I/PT - 16-bit 40MIPS 32KB Flash MCU | Microchip

The Microchip Technology PIC24HJ32GP304T-I/PT is a 16-bit microcontroller from the PIC24H family, executing up to 40 MIPS (million instructions per second) and integrating 32KB of Flash program memory with 2KB of SRAM, housed in a 44-pin TQFP (10x10 mm) package. It operates from a 3.0V to 3.6V supply and delivers 21 general-purpose I/O pins, making it a compact solution for high-performance control applications. A 16-bit microcontroller (MCU) is a microprocessor optimized for embedded control with a wider data path than 8-bit MCUs, enabling faster arithmetic, more precise DSP-style operations, and larger direct memory addressing. Within the MCU hierarchy, the PIC24H sits in the high-performance tier above 8-bit PIC MCUs but below 32-bit ARM Cortex-M parts. It belongs to the broader category of embedded microcontrollers > RISC microcontrollers > 16-bit microcontrollers, and uses a modified Harvard architecture with separate program and data buses for deterministic execution. Key features of the PIC24HJ32GP304T-I/PT include a 16-bit wide datapath, C-compiler-friendly orthogonal instruction set, 16-channel 10/12-bit ADC, three 16-bit timers, two UART modules, two SPI modules, two I2C modules, and a dedicated DMA controller with 8 channels. The DMA engine offloads data movement between peripherals and memory without CPU intervention, a notable advantage over simpler 16-bit MCUs that lack DMA. The integrated 16-bit PWM and Input Capture modules make this device well suited to motor and power-conversion control loops. The device is pin-compatible with the dsPIC33F family, allowing easy migration to DSP-capable variants when signal-processing requirements emerge. The industrial-grade -40C to +85C operating range and the wide 3.0V-3.6V supply tolerance suit industrial and consumer environments. The 'T' suffix indicates Tape & Reel packaging for high-volume assembly, while the 'I' denotes the industrial temperature grade. Typical applications include motor control (BLDC, PMSM, stepper), digital power conversion (SMPS, PFC), industrial sensors, LED lighting controllers, and general-purpose embedded control. The DMA engine and PWM peripherals specifically suit real-time control loops where deterministic timing is critical. When designing with this device, allocate a 4.7uF bulk capacitor near VDD and 0.1uF ceramic decoupling on each supply pin. Configure unused I/O as outputs to minimize current draw, and reserve an ICSP/ICD pin pair (PGECx/PGEDx) for in-circuit debugging. Always validate PWM timing and ADC sampling against the 40 MIPS instruction budget to avoid pipeline stalls in time-critical loops. This page synthesizes distributor pricing, drop-in alternative MPNs, and engineering design notes that go beyond what the manufacturer datasheet alone provides for engineers evaluating the PIC24HJ32GP304T-I/PT.

Cotización Contacto
PIC24HJ64GP202-E/MM - 16-bit 40 MIPS 64KB Flash MCU | Microchip
PIC24HJ64GP202-E/MM

PIC24HJ64GP202-E/MM - 16-bit 40 MIPS 64KB Flash MCU | Microchip

The Microchip Technology PIC24HJ64GP202-E/MM is a 16-bit microcontroller from the PIC24H family, featuring a 40 MIPS (40 MHz) PIC24 CPU core, 64 KB of Flash program memory and 8 KB of data RAM, housed in a 28-pin QFN-S (6x6 mm) package. The part operates from a 3.0 V to 3.6 V supply and integrates 21 general-purpose I/O pins, dual UART, dual SPI and I2C peripherals, plus a 12-bit ADC and three 16-bit timers. The “-E” temperature grade extends operation from -40C to +125C for industrial and harsh-environment designs. A 16-bit microcontroller (MCU) is an embedded processor that executes instructions on 16-bit data paths, occupying the middle ground between 8-bit MCUs (PIC16, AVR) and 32-bit Cortex-M parts. Within the broader taxonomy, the PIC24H belongs to the dsPIC/PIC24 family -> 16-bit microcontroller -> embedded MCU -> microcontroller IC -> semiconductor. The “H” sub-series adds DMA and a hardware multiplier, giving the PIC24H deterministic real-time response and signal-processing throughput that 8-bit MCUs cannot deliver at comparable code density. The PIC24HJ64GP202-E/MM offers 8-channel DMA, a 16-channel 12-bit ADC with 500 ksps throughput, and dedicated motor-control PWM peripherals. It is pin-compatible with the dsPIC33F family, allowing migration to DSP-enabled parts without PCB rework. The 28-QFN exposed pad lowers junction-to-ambient thermal resistance, enabling higher continuous CPU throughput at elevated ambient temperatures. An integrated 8 MHz internal oscillator reduces BOM cost, while the on-chip 16-bit timer/counter block supports three independent timers that can be paired into one 32-bit timer. Typical applications include industrial motor control (BLDC, PMSM, stepper), digital power conversion (SMPS, PFC, LLC), sensor signal conditioning and sensor-fusion front ends, automotive body and chassis ECUs (where -E grade is mandatory), and high-performance sensor hubs. The DMA-driven 12-bit ADC also suits data-acquisition front-ends and predictive-maintenance vibration monitoring. When designing with this MCU, place a 100 nF decoupling capacitor at each VDD/AVDD pin and a 10 uF bulk capacitor near the exposed pad. The exposed pad MUST be soldered to a continuous ground plane for thermal dissipation and EMI performance. The PIC24HJ64GP202-E/MM is a member of Microchip’s Classic 16-bit PIC24H portfolio, which is pin-compatible with PIC24FJ and dsPIC33F devices in the same package.

Cotización Contacto
PIC24HJ64GP202-E/SP - 16-bit 40 MIPS MCU 64KB Flash | Microchip
PIC24HJ64GP202-E/SP

PIC24HJ64GP202-E/SP - 16-bit 40 MIPS MCU 64KB Flash | Microchip

The Microchip Technology PIC24HJ64GP202-E/SP is a 16-bit microcontroller from the PIC24H family, operating at up to 40 MIPS with 64 KB of Flash program memory and 8 KB of RAM, housed in a 28-pin SPDIP (Skinny Plastic DIP) package. It features a high-performance modified Harvard architecture with a 16-bit data path, single-cycle bit manipulation, and deterministic interrupt response suited for real-time embedded control. What is a PIC24H microcontroller? The PIC24H is a 16-bit MCU family within the broader PIC microcontroller hierarchy (PIC10/12/16 -> PIC18 -> PIC24 -> dsPIC -> 32-bit PIC32). It bridges the gap between 8-bit PIC MCUs and 32-bit ARM Cortex-M devices, offering higher performance than PIC18 while retaining deterministic interrupt behavior and a familiar MPLAB development ecosystem. The 24H sub-family adds a DMA controller and dedicated motor-control peripherals, positioning it as a mid-range real-time control platform. Key features include 64 KB (22K x 24 instruction words) of self-programmable Flash, 8 KB SRAM, a 16-channel 12-bit ADC with 500 ksps conversion rate, three 16-bit timers that can pair into a 32-bit timer, two UART modules, two SPI modules, and an I2C module. The integrated DMA controller has 8 channels that move data between peripherals and memory without CPU intervention, offloading repetitive transfer tasks in DSP and motor-control loops. The 40 MIPS execution rate comes from a 40 MHz oscillator with a 2-cycle instruction pipeline, supporting single-cycle multiply and hardware divide. The 21 general-purpose I/O pins include change-notification interrupts and 5V tolerance on most pins, allowing direct interfacing with 5V sensors and actuators from a 3.3V supply. The instruction set is highly orthogonal with C-compiler-friendly addressing modes, making code porting between PIC24 and dsPIC33 devices straightforward. Typical applications include industrial motor control (BLDC, PMSM, stepper), digital power conversion (SMPS, PFC), HVAC control, automotive body electronics, sensor signal conditioning, and consumer appliance control. The DMA + ADC combination is particularly effective for multi-channel current/voltage sampling in field-oriented control (FOC) loops. When designing with this device, place a 10 uF bulk capacitor and 0.1 uF decoupling capacitor near each VDD/VDDCORE pin pair, and ensure the VDDCORE voltage regulator capacitor (typically 10 uF) is located within 6 mm of the VCAP pin. The 28-SPDIP package supports through-hole assembly, simplifying prototyping and field service for industrial installations. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes that complement the manufacturer datasheet.

Cotización Contacto
PIC24HJ64GP202-I/MM - 16-bit 40 MIPS 64KB Flash MCU | Microchip
PIC24HJ64GP202-I/MM

PIC24HJ64GP202-I/MM - 16-bit 40 MIPS 64KB Flash MCU | Microchip

The Microchip PIC24HJ64GP202-I/MM is a 16-bit PIC24H microcontroller delivering 40 MIPS performance with 64 KB Flash and 8 KB SRAM in a 28-pin QFN-S (6x6 mm) package. It features a wide 3.0 V to 3.6 V supply range, 21 general-purpose I/O pins, and an integrated 16-channel 10/12-bit ADC for advanced analog applications. What is a PIC24H microcontroller? The PIC24H is a high-performance 16-bit MCU family within Microchip's PIC24 portfolio, designed for applications requiring high-speed repetitive computations and real-time control. Architecturally, it sits above the PIC24F and dsPIC30 families but below the dsPIC33F in capability, offering DSP-friendly instruction set features with deterministic interrupt response and Harvard bus architecture. Key features include 64 KB (22K x 24) self-programmable Flash with ECC, 8 KB SRAM, two UARTs, two SPI ports, two I2C ports, two CAN modules, three 16-bit timers that can pair to form one 32-bit timer, four output-capture and four PWM/compare channels, plus a hardware real-time clock and calendar (RTCC). The 16-bit ADC can be configured for 10-bit at 500 ksps or 12-bit at 200 ksps, supporting precision mixed-signal designs. The PIC24HJ family uses a modified Harvard architecture with a 16-bit wide data path and 24-bit wide instructions, achieving 40 MIPS at 40 MHz CPU clock. The pin-compatible dsPIC33F family offers DSP extensions for advanced motor-control and power-conversion algorithms. The integrated CAN 2.0B controller, combined with 40 MIPS throughput, enables automotive and industrial networking nodes without external protocol ASICs. Typical applications include industrial control systems, automotive body and chassis electronics, motor-control boards, sensor-fusion nodes, and medical patient-monitoring devices. The wide operating-temperature range of -40 C to +85 C and integrated peripherals make it well suited for harsh-environment deployment. When designing with this device, ensure 3.0 V to 3.6 V supply regulation with adequate decoupling near VDD/VSS pairs. Verify unused pin configurations per datasheet recommendations, and review the electrical specification for I/O sink/source limits when driving LEDs or relays directly. This page synthesizes distributor pricing, drop-in pin-compatible alternatives from the PIC24 family, and practical design considerations not found in the manufacturer datasheet alone.

Cotización Contacto
PIC24HJ64GP202-I/SO - 16-bit 40 MIPS MCU 64KB Flash | Microchip
PIC24HJ64GP202-I/SO

PIC24HJ64GP202-I/SO - 16-bit 40 MIPS MCU 64KB Flash | Microchip

The Microchip Technology PIC24HJ64GP202-I/SO is a 16-bit microcontroller from the PIC24H family, providing 64 KB program Flash and 8 KB RAM, executing up to 40 MIPS at 40 MHz from a 3.0–3.6 V supply in a 28-pin SOIC package. It is the SOIC (R-PDSO-G28, 1.27 mm pitch) industrial-temperature variant of the PIC24HJ64GP202 die and is pin-compatible with other PIC24HJ64GP2xx devices in the same SOIC-28 footprint. A 16-bit MCU (microcontroller) is a single-chip computer that integrates a CPU core, program memory, data RAM, and a rich set of peripherals (ADC, timers, UART, SPI, I2C, PWM, I/O). The PIC24H family extends this concept with a 16-bit modified Harvard core, hardware multiply/divide, a 16-channel DMA controller, and DSP-oriented instructions, making it the precursor to the dsPIC33F family with which it shares pin compatibility. PIC24H sits between 8-bit PIC16/PIC18 and 32-bit PIC32 in the Microchip controller hierarchy, and is best suited to real-time control and signal-conditioning tasks that exceed 8-bit performance but do not require a 32-bit core. Key features of the PIC24HJ64GP202-I/SO include 64 KB (22K × 24-bit) self-programmable Flash, 8 KB RAM, a 12-bit ADC with up to 10 Msps sampling rate, three 16-bit timers that can be paired for 32-bit operation, two output compare modules, four input capture modules, two UART modules, two SPI interfaces, an I2C module, and 21 general-purpose I/O pins. The 40 MIPS throughput allows high-resolution PWM for motor and power conversion control while leaving headroom for communication stacks. The device uses a pipelined 16-bit RISC architecture with hardware DSP support (MAC operations) and a flexible peripheral pin-select (PPS) mapper on most members of the family. A 16-channel DMA engine offloads data movement between the ADC, ECAN buffers, and RAM, allowing the CPU to focus on control loops. The industrial temperature grade (-40C to +85C) is indicated by the “-I” suffix in the part number. Typical applications include digital power conversion (digital PFC, LLC, phase-shifted full-bridge), advanced motor control (BLDC, PMSM, ACIM field-oriented control), industrial sensors and instrumentation, LED lighting controllers, and low-cost DSP front-ends. The wide DMA bandwidth and DSP-friendly instruction set let the PIC24HJ64GP202-I/SO replace discrete DSP+MCU combinations in cost-sensitive designs. When designing with this part, ensure that the supply sits within 3.0–3.6 V (typical 3.3 V) and that decoupling is placed close to the VDD/VSS pairs. Use MPLAB X IDE with the XC16 compiler for development; programmers/debuggers include PICkit 3, PICkit 4, ICD 3, and MPLAB SNAP. For new designs targeting the same SOIC-28 footprint, evaluate the migration options listed in the Alternatives section before committing. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
PIC24HJ64GP202-I/SP - 16-bit 40MIPS MCU 64KB Flash DIP-28 | Microchip
PIC24HJ64GP202-I/SP

PIC24HJ64GP202-I/SP - 16-bit 40MIPS MCU 64KB Flash DIP-28 | Microchip

The Microchip Technology PIC24HJ64GP202-I/SP is a high-performance 16-bit microcontroller from the PIC24H family, delivering up to 40 MIPS throughput at 40 MHz and integrating 64 KB of Flash program memory with 8 KB of RAM in a 28-pin SPDIP (Skinny Plastic DIP) through-hole package. It operates from a 3.0V to 3.6V supply, provides 21 general-purpose I/O pins, and includes advanced analog peripherals such as a 12-bit ADC, multiple 16-bit timers that can be paired to form a 32-bit timer, two output captures, and a DMA controller for offloading CPU data movement. The "/SP" suffix designates the industrial temperature grade (-40C to +85C) SPDIP-28 package. A 16-bit microcontroller (MCU) is an embedded processor whose datapath and registers are 16 bits wide, sitting between 8-bit MCUs (typical of consumer appliances) and 32-bit MCUs (typical of high-end application processors). The PIC24H belongs to the dsPIC/PIC24 Harvard-architecture family, which separates program and data memory to allow simultaneous fetch and execute, yielding deterministic instruction timing. Within Microchip's product hierarchy, the PIC24H is classified as a high-performance 16-bit MCU, part of the broader microcontroller -> embedded processor -> semiconductor taxonomy. Key differentiating features of the PIC24HJ64GP202 include its 40 MIPS sustained performance, hardware DMA controller that frees the CPU from repetitive data transfers between peripherals and memory, and a rich analog suite with 12-bit ADC, comparators, and 16-bit/32-bit timer options. The integrated CRC engine and JTAG/ICSP debug interface streamline firmware development and field programming. Typical applications include industrial motor control, digital power conversion (the "GP" series targets general-purpose control loops), sensor signal conditioning, automotive body electronics, and consumer appliances requiring deterministic real-time response. The 28-pin DIP package is favored for breadboarding, hobby projects, educational use, and legacy form-factor designs where through-hole assembly simplifies prototyping and rework.

Cotización Contacto
PIC24HJ64GP202T-I/MM - 16-bit 40MIPS MCU, 64KB Flash, 28-QFN | Microchip
PIC24HJ64GP202T-I/MM

PIC24HJ64GP202T-I/MM - 16-bit 40MIPS MCU, 64KB Flash, 28-QFN | Microchip

The Microchip Technology PIC24HJ64GP202T-I/MM is a 16-bit microcontroller from the PIC24H family that delivers up to 40 MIPS of computational throughput, housed in a compact 28-pin QFN-S (6x6 mm) package with industrial temperature grade (-40C to +85C). The device integrates 64 KB of flash program memory (22K x 24 organization), 8 KB of SRAM, and a 16-bit core optimized for high-speed, repetitive computations and real-time control. According to the Microchip product page, the PIC24H family is pin-compatible with the dsPIC33F series, giving designers a clear migration path to DSP extensions when signal-processing needs grow. What is a 16-bit microcontroller? A 16-bit MCU is a single-chip computer with a 16-bit data path, instruction word, and ALU, sitting in the taxonomy: microcontroller -> embedded MCU -> 16-bit MCU -> digital signal controller. Compared with 8-bit MCUs, 16-bit parts offer higher code density, faster arithmetic, and richer peripherals; compared with 32-bit MCUs, they typically cost less and consume less power. The PIC24H uses a modified Harvard architecture with a 24-bit instruction word and 16-bit data path, an unusual combination that increases code density while preserving deterministic real-time interrupt behavior. Key features of the PIC24HJ64GP202T-I/MM include 21 general-purpose I/O pins, multiple 16-bit timers, a 12-bit A/D converter with up to 10 channels, motor-control PWM, UART, SPI, I2C, and a DMA controller that offloads data movement from the CPU. The 64 KB flash supports self-programming and is rated for >10,000 erase/write cycles, while the 8 KB SRAM is sufficient for full TCP/IP stack plus application buffer memory. Technical depth: the 16-bit PIC24H core uses a 5-stage pipeline and a 16 x 16-bit hardware multiplier that completes a 16x16 multiply in one cycle. Combined with the 40 MHz maximum clock this yields 40 MIPS sustained throughput. DMA-capable peripherals can move ADC samples, SPI/I2C traffic, and PWM updates without CPU intervention, freeing the core for control loops. Typical applications include industrial motor control (BLDC, PMSM, stepper), digital power conversion (SMPS, PFC), sensor signal processing, embedded industrial controllers, and consumer devices needing precise real-time control. Pin compatibility with dsPIC33F devices means designers can migrate to DSP extensions when they add FFT, FIR, or PLL-driven algorithms. When designing with this part, remember the 28-QFN (MM) package has an exposed thermal pad that must be soldered to the ground plane for proper electrical performance and heat dissipation. The industrial temperature grade (-40C to +85C) is denoted by the I suffix in the ordering code. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical PCB design notes not found in the manufacturer datasheet alone, helping procurement and embedded engineers evaluate the PIC24HJ64GP202T-I/MM against other PIC24H and competing 16-bit MCU options.

Cotización Contacto
PIC24HJ64GP204-E/PT - 16-bit 40 MIPS MCU 64KB Flash 44-TQFP | Microchip
PIC24HJ64GP204-E/PT

PIC24HJ64GP204-E/PT - 16-bit 40 MIPS MCU 64KB Flash 44-TQFP | Microchip

The Microchip Technology PIC24HJ64GP204-E/PT is a 16-bit microcontroller from the PIC24H family, delivering 40 MIPS (40 MHz) of computational throughput with 64 KB of Flash program memory and 8 KB of SRAM, housed in a 44-pin TQFP package rated -40C to +125C for automotive (E) temperature grade. A 16-bit microcontroller (MCU) is a microprocessor-on-a-chip that integrates a 16-bit CPU core, program and data memory, peripherals, and I/O on a single die. The PIC24H family uses a modified Harvard RISC architecture with 16-bit wide data paths and a 24-bit instruction word, sitting in the hierarchy between 8-bit PIC MCUs and 32-bit MIPS-based PIC32 devices. The 40 MIPS performance class is typically applied to high-speed repetitive control loops, motor control, and digital signal preprocessing where 8-bit MCUs run out of headroom but a full DSP is unnecessary. Key features include a 16-channel 10/12-bit ADC (configurable), three 16-bit timers (pairable to one 32-bit), two output compares, two UART/SPI/I2C capable EUSART/ECAN modules, a 4-channel DMA controller, an 8-bit parallel master port, and a charge time measurement unit (CTMU) for capacitive touch sensing. The automotive -E temperature grade and AEC-Q100 qualification make this variant a direct fit for under-hood and cabin electronic control units. Architecturally, the PIC24HJ64GP204 implements a single-cycle hardware multiplier, a 16x16-bit working register array, and a 23-bit program counter. Code execution at 40 MHz completes most instructions in one cycle, giving deterministic interrupt latency suitable for hard-real-time control. The DMA controller offloads peripheral-to-memory transfers, freeing the core for control algorithms. Typical applications include automotive body control modules, HVAC damper actuators, sensor interface hubs, industrial PLC I/O cards, BLDC motor control sensor interfaces, and consumer appliances with capacitive touch user interfaces. The 8 KB SRAM accommodates modest protocol stacks such as CAN and LIN. When designing with this device, ensure the 3.0-3.6 V supply is tightly regulated, allocate a 4.7uF-10uF decoupling network near VDD/AVDD pairs, and reserve the MCLR pin for a proper reset supervisor. The E variant ships in 44-TQFP only, so verify your PCB land pattern matches. This page synthesizes distributor pricing, AEC-Q100 verified drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
PIC24HJ64GP204-I/PT - 16-bit MCU, 64KB Flash, 40 MIPS | Microchip
PIC24HJ64GP204-I/PT

PIC24HJ64GP204-I/PT - 16-bit MCU, 64KB Flash, 40 MIPS | Microchip

The Microchip Technology PIC24HJ64GP204-I/PT is a 16-bit PIC24H microcontroller delivering up to 40 MIPS performance from a 16-bit modified Harvard architecture, housed in a 44-pin TQFP (PT) 10x10 mm package. It integrates 64 KB of Flash program memory (22K x 24 instruction words) and 8 KB of on-chip SRAM, providing ample headroom for control loops, communication stacks, and DSP-style signal processing in real-time embedded systems. A 16-bit microcontroller (MCU) is a microprocessor core whose datapath and registers are 16 bits wide, offering a 4x performance and code-density advantage over 8-bit cores for math-intensive tasks while remaining simpler than 32-bit devices. Within the taxonomy MCU -> 16-bit MCU -> dsPIC/PIC24 -> microcontroller -> semiconductor, the PIC24H family sits between 8-bit PIC MCUs and 32-bit PIC32 devices, targeting motor control, power conversion, and high-speed sensor interfaces. Operating from 3.0V to 3.6V, the PIC24HJ64GP204-I/PT is built on a CMOS process with onboard DMA and peripherals tuned for deterministic control. Key features include 21 general-purpose I/O pins, three 16-bit timers (pairable into one 32-bit timer), two Output Capture modules, four PWM output pairs with duty-cycle resolution suited to motor and power-converter control, a 10/12-bit ADC, and communication peripherals covering UART, SPI, and I2C. The integrated DMA controller (8 channels) offloads data movement from the CPU, freeing cycles for algorithm execution in motor-control and signal-processing loops. Architecturally, the PIC24H uses a modified Harvard core with a 24-bit instruction word and 16-bit datapath, branch prediction, and a hardware multiplier that completes a 16x16-bit MAC in one cycle, contributing directly to its 40 MIPS rating. The device is pin-compatible with the dsPIC33F family, allowing migration to DSP instructions if algorithm requirements grow without PCB rework. Typical applications include industrial motor control (BLDC, PMSM, FOC), digital power conversion (SMPS, PFC, LLC), sensor signal processing, automotive body electronics, and medical instrumentation. The wide peripheral set and DMA make it a strong fit for closed-loop control applications where deterministic response times are critical. When designing with this MCU, ensure decoupling on VDD/AVDD pairs and follow Microchip's recommended 44-pin TQFP PCB layout for the exposed thermal pad (if any). Verify peripheral pin mapping in the device datasheet before committing to layout, since alternate function assignments differ across PIC24H variants. This page synthesizes distributor pricing, drop-in alternatives drawn from the same PIC24H family and compatible families, and practical design notes not found in the manufacturer datasheet alone, supporting faster sourcing and BOM decisions.

Cotización Contacto
PIC24HJ64GP204T-I/ML - 16-Bit 40MIPS MCU 64KB Flash 44-QFN | Microchip
PIC24HJ64GP204T-I/ML

PIC24HJ64GP204T-I/ML - 16-Bit 40MIPS MCU 64KB Flash 44-QFN | Microchip

The Microchip Technology PIC24HJ64GP204T-I/ML is a 16-bit PIC24H microcontroller with 40 MIPS CPU performance, 64KB of Flash program memory, and a 44-pin QFN (8x8 mm) package. The 'T' suffix indicates Tape and Reel packaging, while 'I' denotes the industrial -40C to +85C temperature range. The device integrates 8KB RAM, advanced analog capabilities, and pin compatibility with the dsPIC33F family of digital signal controllers. A 16-bit microcontroller is an embedded processor that executes instructions on 16-bit-wide data paths, doubling the computational throughput of 8-bit MCUs while maintaining deterministic interrupt response. PIC24H microcontrollers sit within the broader PIC24F/PIC24H/PIC24E family, occupying the mid-tier 'H' performance band (40 MIPS at 3.3V) between the low-power 'F' family and the high-performance 'E' family. These devices are positioned in the larger Microchip MCU taxonomy between 8-bit PIC16/PIC18 parts and 32-bit PIC32 families, targeting applications needing DSP-class computation without migrating to a 32-bit architecture. Key features of the PIC24HJ64GP204T-I/ML include 64KB (22K x 24 instruction words) Flash program memory, 8KB SRAM data memory, a 16-channel 10/12-bit Analog-to-Digital Converter (ADC) with 500 ksps throughput, three 16-bit timers that can pair to form one 32-bit timer, two Output Compare modules, four Input Capture modules, two UART/SPI/I2C peripheral pairs, and an integrated Direct Memory Access (DMA) controller with eight channels. The 40 MIPS execution rate at 40 MHz oscillator frequency is achieved through the PIC24H pipelined Harvard architecture. The PIC24HJ64GP204T-I/ML operates from a 3.0V to 3.6V supply (3.3V typical), making it compatible with industrial 3.3V logic rails. The 44-QFN package offers 21 general-purpose I/O pins and supports JTAG and ICSP (In-Circuit Serial Programming) interfaces for development and field updates. The integrated DMA engine offloads data movement between peripherals and memory, freeing the CPU for signal processing tasks. Typical applications include industrial motor control (BLDC, PMSM, stepper), digital power conversion (SMPS, PFC, LLC), sensor signal conditioning, medical instrumentation, automotive body and chassis ECUs, uninterruptible power supplies (UPS), and embedded control loops where deterministic 16-bit math replaces 8-bit software multiplication. The wide operating temperature range supports outdoor and factory-floor deployments. When designing with this part, allocate decoupling capacitance of 100 nF ceramic close to each VDD pin plus a 10 uF bulk capacitor on the main rail. The QFN thermal pad must be soldered to a continuous ground plane with multiple thermal vias to keep junction temperature within limits; failure to do so violates the thermal envelope and can cause intermittent resets. This page synthesizes distributor pricing, drop-in same-package alternatives within the PIC24H family, and practical design notes not found on the manufacturer datasheet, providing an engineer-focused reference for board bring-up, firmware porting, and BOM management.

Cotización Contacto
PIC24HJ64GP206-I/PT - 40 MIPS 16-bit MCU 64KB Flash TQFP-64 | Microchip
PIC24HJ64GP206-I/PT

PIC24HJ64GP206-I/PT - 40 MIPS 16-bit MCU 64KB Flash TQFP-64 | Microchip

The Microchip Technology PIC24HJ64GP206-I/PT is a 16-bit microcontroller from the PIC24H family that delivers up to 40 MIPS performance at 3.3 V, integrates 64 KB Flash program memory and 8 KB RAM, and is packaged in a 64-pin TQFP (10x10 mm) form factor with 53 I/O pins. The device operates from a 3.0 V to 3.6 V supply and is qualified for the industrial -40 C to +85 C temperature range, as denoted by the I suffix and PT TQFP-64 package designator. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile working memory (RAM), and a rich set of peripherals on one die. Within the broader semiconductor taxonomy, an MCU belongs to the integrated circuit family, sits under the embedded processor hierarchy, and is differentiated from microprocessors (MPUs) by its on-chip Flash and peripherals. The PIC24H is a 16-bit Harvard-architecture MCU positioned between the 8-bit PIC18 family and the 16-bit dsPIC33F DSP-capable family, offering seamless migration paths from/to PIC24F, dsPIC30F and dsPIC33F devices. Key features include 64 KB (22K x 24) Flash program memory organized as instruction words, 8 KB SRAM, a 40 MHz maximum clock speed yielding 40 MIPS throughput, and a 12-bit A/D converter with up to 16 input channels. The device integrates multiple UART, SPI, I2C peripherals, DMA channels, and a built-in RTCC for calendar and timestamping. An integrated 16-bit timer/counter block supports PWM generation critical for motor control, while the 53 I/O pins tolerate 5 V digital inputs. The architecture uses a 16-bit modified Harvard design with separate program and data buses plus a 24-bit instruction word optimized for code density. The CPU executes most instructions in a single cycle, achieving 40 MIPS throughput at 40 MHz, while the integrated DMA controller offloads peripheral data movement from the CPU, freeing MIPS for control loops and signal processing. C code compiled with MPLAB XC16 runs at full instruction-cycle efficiency. Typical applications include industrial BLDC/PMSM/stepper motor control, digital power conversion, advanced sensor interfacing, predictive maintenance edge nodes, and general-purpose embedded control requiring deterministic 16-bit computation. Engineers select this part where dsPIC33F DSP capability is not required but 16-bit performance exceeds PIC18 capability. When designing, ensure adequate decoupling on VDD/AVDD pairs (100 nF + 1 uF typical), use the dedicated VCAP pin for the internal voltage regulator with the manufacturer-specified 10 uF capacitor, and reserve the 11 dedicated pins for supply, programming, and oscillator functions. A JTAG or ICSP programming header should be brought out for in-circuit firmware updates. This page synthesizes distributor pricing, drop-in PIC24H alternatives, and practical design notes that the manufacturer datasheet alone does not present, providing a one-stop engineering reference.

Cotización Contacto
PIC24HJ64GP206A-I/PT - 16-bit 40MIPS 64KB Flash MCU | Microchip
PIC24HJ64GP206A-I/PT

PIC24HJ64GP206A-I/PT - 16-bit 40MIPS 64KB Flash MCU | Microchip

The Microchip Technology PIC24HJ64GP206A-I/PT is a 16-bit PIC24H general-purpose microcontroller running up to 40 MIPS at 3.3V, integrating 64KB of Flash program memory, 8KB of SRAM, and a 64-pin TQFP (10x10 mm) package. The device uses Microchip's modified Harvard architecture with a 16-bit data path and 24-bit instruction word, delivering deterministic interrupt latency and a single-cycle 16x16 MAC useful for DSP-style control loops. What is a 16-bit microcontroller? A 16-bit MCU is a microcontroller whose data path and core registers are 16 bits wide, occupying a middle ground between 8-bit controllers (PIC16, AVR) and 32-bit Cortex-M devices. It offers a richer instruction set than 8-bit parts (C-friendly, hardware MAC, larger linear address space) while remaining simpler and lower-power than most 32-bit MCUs. Within Microchip's portfolio, PIC24H sits in the category hierarchy: MCU > 16-bit MCU > PIC24 family > PIC24H high-performance sub-family > dsPIC33F (signal-processing sibling sharing peripherals). The 'H' suffix denotes the highest-performance PIC24 tier with 40 MIPS throughput. Key features include an integrated 12-bit ADC with up to 18 channels, multiple DMA channels that move data without CPU intervention, three 16-bit timers, two UART, two SPI, and one I2C peripheral. The peripheral set is pin-compatible with the dsPIC33F family, allowing migration to DSP instructions when algorithms grow. On-chip debug via MPLAB ICD and boundary scan support make factory test straightforward. Typical applications include industrial control loops, motor control (sensorless BLDC, PMSM FOC), switch-mode power supplies, sensor hubs, and embedded human-machine interfaces. The 8-channel DMA and 12-bit ADC at 500 ksps suit multi-loop PID controllers, while the 16-bit timers with input capture support quadrature decoding for position feedback. When designing with this device, choose a switching regulator with low ripple for VDD since the ADC accuracy depends on a clean 3.3V rail. Place the 10 µF + 0.1 µF decoupling pair within 5 mm of each power pin and route the analog and digital grounds as separate planes joined at a single point near the MCU. Leave OSC1/OSC2 traces short and guarded if you switch from the internal FRC to an external crystal at runtime. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
PIC24HJ64GP206AT-I/MR - 16-bit 64KB Flash MCU, 40 MIPS, 64-QFN | Microchip
PIC24HJ64GP206AT-I/MR

PIC24HJ64GP206AT-I/MR - 16-bit 64KB Flash MCU, 40 MIPS, 64-QFN | Microchip

The Microchip PIC24HJ64GP206AT-I/MR is a 16-bit PIC24H general-purpose microcontroller with 64 KB Flash, 8 KB RAM and 40 MIPS performance, housed in a 64-pin VQFN (MR) package with exposed thermal pad. Key specifications include a 40 MHz maximum operating frequency (yielding 40 MIPS), 64 KB on-chip Flash program memory, 8 KB SRAM, 4 KB EEPROM emulation data memory, and a wide operating voltage range of 3.0V to 3.6V. The device features advanced peripherals including 2 UART, 2 SPI, and 2 I2C interfaces, plus a 16-channel 10/12-bit ADC. It also integrates a 16-bit timer/counter block and up to 51 general-purpose I/O pins. The 'A' suffix indicates revision A silicon; the trailing 'T' indicates tape-and-reel packaging; the '-I' industrial temperature range is -40C to +85C. A 16-bit MCU is a microcontroller built around a 16-bit data path and instruction word, offering higher code density and arithmetic throughput than 8-bit MCUs while retaining deterministic real-time interrupt behaviour. Within Microchip's hierarchy, the PIC24H belongs to the PIC24F/PIC24H family of 16-bit microcontrollers -> PIC24 microcontroller family -> 16-bit MCU class -> embedded microcontroller -> semiconductor. The PIC24H architecture shares a 16-bit modified Harvard core with the dsPIC33F DSC family, enabling migration to DSP functionality with the same tool chain and peripheral set. The 'GP' (General Purpose) part number denotes a peripheral mix tuned for control loops, communication bridging, and human-machine interface tasks. The PIC24HJ64GP206A devices are pin-compatible with the dsPIC33FJ64GP206A DSC family, allowing firmware upgrade paths from MCU to DSC with the same PCB footprint. The 64-VQFN exposed pad package provides low thermal resistance for reliable operation in industrial environments with junction temperatures up to 150C. Typical applications include industrial motor control, sensor signal processing, switching power supply digital control, USB device controllers (with external PHY), HVAC controllers, and automotive body electronics sub-modules. The 40 MIPS throughput makes it well-suited for real-time PID loops and digital filtering tasks where an 8-bit MCU would saturate the CPU. When designing with this part, ensure the VQFN exposed pad is soldered to a sufficient copper pour (recommended 1 square inch minimum) for thermal dissipation. Decoupling capacitors (100 nF + 10 uF bulk) must be located within 5 mm of each power pin to meet the ADC SNR spec. For designs migrating to DSP, use the pin-compatible dsPIC33FJ64GP206A directly without PCB rework.

Cotización Contacto