Microcontroladores

Productos (18688)

PIC32MX534F064L-I/PF - 80MHz MIPS32 64KB Flash MCU | Microchip
PIC32MX534F064L-I/PF

PIC32MX534F064L-I/PF - 80MHz MIPS32 64KB Flash MCU | Microchip

The Microchip PIC32MX534F064L-I/PF is a 32-bit MIPS microcontroller from the PIC32MX5XX/6XX/7XX family, featuring an M4K core running at 80MHz with 105 DMIPS performance, 64KB Flash program memory and 16KB SRAM, packaged in a 100-pin TQFP (14x14x1mm) form factor. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals. The PIC32MX534 belongs to the MIPS32 architecture family — higher-level than PIC24/dsPIC, lower-level than Cortex-M — and Microchip's PIC32MX family is a bridge between 8/16-bit PIC microcontrollers and 32-bit ARM Cortex-M class devices, offering a familiar MPLAB X toolchain. PIC32MX devices integrate USB 2.0 On-The-Go with PHY, CAN 2.0b, multiple DMA channels and parallel master port for graphics and connectivity. Key features of the PIC32MX534F064L-I/PF include USB 2.0 OTG with integrated PHY, four dedicated DMA channels, a 5-stage pipeline Harvard architecture, MIPS16e code compression for up to 40% smaller code size, and an integrated CAN 2.0b module. Operating voltage range is 2.3V to 3.6V with industrial temperature range -40C to +85C. The device integrates a 16-channel 10-bit ADC, multiple UART/SPI/I2C peripherals, a Parallel Master Port (PMP) for graphics or external memory, and up to 85 I/O pins. The 64KB Flash supports self-programming and is partitioned for bootloader use. Typical applications include USB peripherals and HID devices, CAN-based industrial nodes, low-cost graphics HMI with PMP, embedded web servers, and industrial automation controllers. The combination of USB OTG and CAN makes it particularly suited for industrial/automotive networked nodes. When designing with this device, ensure 2.3V-3.6V supply regulation and follow Microchip's PIC32 hardware design checklist for crystal selection and decoupling. Programming is supported through MPLAB X IDE with PICkit 5 / ICD 4 debuggers. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

USD $4,20 En stock
PIC32MX534F064L-I/PT - 80MHz 32-bit MCU, 64KB Flash, USB/CAN | Microchip
PIC32MX534F064L-I/PT

PIC32MX534F064L-I/PT - 80MHz 32-bit MCU, 64KB Flash, USB/CAN | Microchip

The Microchip Technology PIC32MX534F064L-I/PT is a 32-bit MIPS M4K microcontroller operating at 80 MHz with 64 KB of Flash program memory and 16 KB of RAM, housed in a 100-pin TQFP (12x12 mm) package. This PIC32MX5xx family member integrates on-chip USB 2.0 full-speed, CAN 2.0B, and Ethernet connectivity, making it a high-performance MCU for connected embedded designs. A 32-bit microcontroller (MCU) is a microprocessor integrating a CPU core, program memory (typically Flash), data memory (RAM), and a rich set of on-chip peripherals into a single IC. The PIC32MX family uses the MIPS32 M4K core, which combines deterministic interrupt response with a five-stage pipeline, placing the PIC32MX family in the hierarchy: 32-bit MCU -> embedded microcontroller -> RISC processor -> integrated circuit. This category is widely used wherever an 8-bit MCU is insufficient for processing throughput or peripheral bandwidth. Key features of the PIC32MX534F064L-I/PT include 64 KB Flash with 16 KB RAM, four DMA channels for offloading data movement, an external bus interface with eight-bit Parallel Master Port (PMP) for graphics or external memory expansion, multiple UART/SPI/I2C interfaces, 16-bit timers and a real-time clock. The integrated USB 2.0 full-speed (12 Mbps) on-chip transceiver and CAN 2.0B controller eliminate external PHY chips, reducing BOM cost and PCB area. The device operates from 2.3 V to 3.6 V and supports an industrial temperature range of -40C to +85C. Internal 8 MHz and 32 kHz oscillators allow flexible clocking, and a PLL multiplies the system clock to 80 MHz for demanding workloads. JTAG and two-wire ICSP interfaces enable in-circuit debugging and programming with Microchip MPLAB tools. Typical applications include industrial automation with CAN-bus networking, USB peripherals such as data loggers or human-interface devices, embedded web servers using Ethernet, point-of-sale terminals, and consumer audio products. The combination of high-throughput peripherals and DSP-extensions in the MIPS core suits mixed signal-and-control designs. When designing with this device, ensure the 100-pin TQFP footprint is laid out with proper thermal relief and that decoupling capacitors are placed adjacent to every VDD/VSS pair. Engineers should also evaluate whether the larger PIC32MX5/6/7xx family provides sufficient memory if the application is RAM-bound. This page synthesizes distributor pricing, drop-in alternatives within the PIC32MX family, and practical design notes not found on a single manufacturer datasheet page.

USD $4,95 En stock
PIC32MX534F064L-V/BG - 80MHz MIPS32 M4K MCU, 64KB Flash, USB-OTG | Microchip
PIC32MX534F064L-V/BG

PIC32MX534F064L-V/BG - 80MHz MIPS32 M4K MCU, 64KB Flash, USB-OTG | Microchip

The Microchip Technology PIC32MX534F064L-V/BG is a 32-bit MIPS32 M4K microcontroller operating at up to 80 MHz, integrating 64 KB of Flash program memory and 16 KB of SRAM in a 121-pin TFBGA (10x10 mm, 0.8 mm pitch) package. It features a USB-OTG controller, a CAN 2.0B module, a 10-bit 1 Msps ADC with up to 16 channels, and a dedicated DMA controller for CPU-offloaded data movement. The -V suffix denotes the extended -40C to +105C operating temperature range suitable for industrial and AEC-Q100-adjacent designs. A microcontroller (MCU) is an integrated circuit that combines a CPU core, volatile and non-volatile memory, and a rich set of peripherals on a single die, forming the compute backbone of embedded systems. PIC32MX5xx devices sit within Microchip's PIC32 family (a superset of MIPS32 M4K cores) and belong to the broader 32-bit MCU segment of the power-management and embedded-control hierarchy. They typically follow an LDO -> linear regulator -> voltage regulator -> power management IC-style of on-chip power management, supplying internal logic rails from a single 2.3 V to 3.6 V external supply. Key differentiating features of the PIC32MX534F064L-V/BG include its combination of full-speed USB-OTG (with on-chip transceiver and dedicated DMA channels), integrated CAN 2.0B, parallel master port (PMP) for external bus interfacing, and five 16-bit timers/compare-capture-PWM modules. The 80 MHz core delivers 1.56 DMIPS/MHz (MIPS32 M4K superscalar architecture), sufficient for TCP/IP stacks and modest DSP-style signal processing. Code execution is accelerated by a prefetch cache and a tightly-coupled RAM region to hide Flash latency. Typical applications include industrial USB-to-CAN bridges, factory automation nodes, HMI panels with PMP-driven TFTs, low-cost motor-control front-ends, and USB peripherals such as data loggers and HID devices. The 121-ball BGA package supports high-density PCB layouts while maintaining access to the full peripheral set. When designing with this device, ensure the 0.8 mm pitch BGA is matched to a PCB with appropriate via-in-pad or dog-bone fan-out to keep routing manageable. The -V variant's +105C ceiling allows placement near heat sources but still requires thermal derating above sustained 70 mA GPIO loads. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that the bare Microchip datasheet does not aggregate, helping engineers select the right part faster.

USD $4,60 En stock
PIC32MX534F064L-V/PF - 80MHz 32-bit MCU w/ USB OTG | Microchip
PIC32MX534F064L-V/PF

PIC32MX534F064L-V/PF - 80MHz 32-bit MCU w/ USB OTG | Microchip

The Microchip Technology PIC32MX534F064L-V/PF is a 32-bit MIPS M4K microcontroller running at 80 MHz, integrating 64 KB Flash and 16 KB SRAM in a 100-pin TQFP (14x14 mm) package. The -V suffix denotes the Vdd range of 2.3V-3.6V, and the -PF suffix identifies the 100-TQFP industrial/leaded package option. A 32-bit microcontroller (MCU) is an integrated processor core, memory, and peripherals designed for embedded control. PIC32MX MCUs belong to the MIPS32 M4K architecture family, which bridges the gap between traditional 8/16-bit PIC microcontrollers and high-performance ARM Cortex-M devices, sitting in the system hierarchy as: PIC32MX -> 32-bit MCU -> MIPS M4K MCU -> embedded microcontroller -> semiconductor. The PIC32MX5xx family specifically adds USB OTG, CAN, and 10-bit ADC peripherals, making it the mainstream connectivity option within the broader PIC32 portfolio. Key features include: 64 KB Flash (64K x 8) and 16 KB SRAM, full-speed USB 2.0 OTG with integrated transceiver, two I2C, two SPI, two UART channels, a 16-channel 10-bit ADC at 1 Msps, five 16-bit timers, a Real-Time Clock and Calendar (RTCC) with alarm, a Fail-Safe Clock Monitor, and a watchdog timer with a dedicated RC oscillator. The device is pin-compatible with 16-bit PIC24/dsPIC devices and other PIC32MX variants, allowing migration without PCB rework. Architecture-wise, the MIPS M4K core delivers 1.56 DMIPS/MHz (Dhrystone 2.1) and supports the MIPS16e instruction set for improved code density. The peripheral bus runs at the system clock divided by 1, with up to 16 DMA channels available for memory-to-memory or peripheral-to-memory transfers without CPU intervention. A 4-channel hardware DMA engine accelerates USB, ADC, and SPI transactions. Typical applications include USB peripherals (HID, CDC, mass storage), industrial control panels, embedded CAN nodes, sensor hubs, low-cost graphical interfaces, and home automation controllers. Designers select this part when USB connectivity, CAN, or substantial peripheral mix is required without the cost of Cortex-M3/M4 silicon. When laying out the PCB, dedicate a clean ground plane under the VAD die area, place a 1uF + 100nF decoupling pair within 5 mm of each VDD/VSS pin pair, route the USB DP/DM pair as a 90 ohm differential and avoid routing them near switching converters or oscillator traces. This page synthesizes drop-in replacement parts, parametric comparisons, and practical design notes not found in the manufacturer datasheet alone.

USD $4,12 En stock
PIC32MX534F064L-V/PT - 32-bit MCU 64KB Flash USB OTG | Microchip
PIC32MX534F064L-V/PT

PIC32MX534F064L-V/PT - 32-bit MCU 64KB Flash USB OTG | Microchip

The Microchip Technology PIC32MX534F064L-V/PT is a 32-bit MIPS M4K microcontroller operating at 80 MHz delivering 105 DMIPS, integrated with 64 KB Flash and 16 KB SRAM, housed in a 100-pin TQFP (12x12 mm) package with USB 2.0 On-The-Go (OTG) peripheral including integrated PHY. It belongs to the PIC32MX5XX/6XX/7XX family and supports industrial temperature grade (-40C to +105C), as indicated by the -V/ suffix. A 32-bit microcontroller (MCU) is a microprocessor-on-a-chip integrating CPU core, program memory (Flash), data memory (SRAM), and a rich peripheral set in a single device. Within the semiconductor taxonomy, MCUs sit under microcontrollers -> embedded processors -> digital ICs -> semiconductors. The PIC32MX534F064L is positioned as a connectivity-focused MCU thanks to integrated USB OTG, CAN 2.0b, and multi-channel DMA optimized for high-bandwidth peripheral traffic. Key features include 64 KB (64K x 8) Flash program memory, 16 KB SRAM, USB 2.0 OTG with integrated PHY and 4 dedicated DMA channels, CAN 2.0b module with 1024 transmit/receive buffers, a 5-stage pipeline Harvard architecture with MIPS16e mode for up to 40% smaller code size, two I2C, two SPI, two UART serial modules, a 10-bit 1 Msps ADC with up to 16 channels, four 16-bit timers, a Real-Time Clock and Calendar (RTCC) with alarm, and a Fail-Safe Clock Monitor that allows safe shutdown if the primary clock fails. Architecturally, the MIPS32 M4K core uses a 5-stage pipeline with separate instruction and data buses (Harvard) plus MIPS16e compressed instruction support, enabling 105 DMIPS at 80 MHz while reducing code footprint by up to 40%. The peripheral DMA engine (8 channels) offloads USB, CAN, and ADC transactions from the CPU, allowing deterministic real-time throughput for embedded connectivity stacks. Typical applications include USB peripherals (HID, CDC, mass storage, audio class), industrial CAN nodes, motor control and BLDC drives, embedded web servers, and POS terminals. The combination of native USB OTG, CAN, and 10-bit ADC makes it well suited for industrial HMI panels and automotive aftermarket dashboards. When designing with this device, allocate PCB area for the 32.768 kHz crystal and load capacitors, and follow Microchip application note AN1160 for USB OTG PCB layout including 90-ohm differential routing on D+/D-. Decouple each VDD/VSS pair with a 100 nF ceramic placed within 3 mm of the pin, plus a bulk 10 uF tantalum on the main rail. This page synthesizes distributor pricing, same-brand drop-in alternatives (other PIC32MX534F064 and PIC32MX534F064H variants), and practical USB OTG design notes not found in the manufacturer datasheet alone.

USD $5,12 En stock
PIC32MX534F064LT-I/PF - 80MHz 32-bit MCU, 64KB Flash, USB/CAN | Microchip
PIC32MX534F064LT-I/PF

PIC32MX534F064LT-I/PF - 80MHz 32-bit MCU, 64KB Flash, USB/CAN | Microchip

The Microchip PIC32MX534F064LT-I/PF is a 32-bit MIPS M4K microcontroller running at 80 MHz with 64 KB Flash and 16 KB SRAM, packaged in a 100-pin TQFP (14x14 mm, 1 mm thick). It integrates full-speed USB 2.0, CAN 2.0B, 4 DMA channels, and a rich peripheral set including UART/SPI/I2C and a 16-bit Parallel Master Port, targeting industrial and embedded control designs. A PIC32MX microcontroller is a 32-bit MCU family from Microchip built on the MIPS32 M4K core architecture. It bridges the gap between 8/16-bit PIC microcontrollers and high-performance ARM Cortex-M parts by offering 32-bit computational throughput, large linear address space, and deterministic interrupt handling while preserving the MPLAB ecosystem (XC32 toolchain, Harmony framework, MPLAB X IDE). The "32MX" family is positioned for connected-embedded applications that need USB, CAN, Ethernet or Ethernet-ready peripherals along with moderate DSP performance. Key features of the PIC32MX534F064LT-I/PF include 64 KB Flash program memory, 16 KB SRAM, an 8-channel 10-bit 1 Msps ADC, five 16-bit timers/capture/compare/PWM modules, two I2C and two SPI/I2S ports, two UARTs with IrDA support, full-speed USB 2.0 (Device/Host/OTG), CAN 2.0B, four-channel DMA, and an internal 8 MHz Fast RC oscillator with PLL. The "T" suffix denotes tape-and-reel packaging and the "-I/PF" suffix denotes industrial temperature grade (-40C to +85C) in the 100-pin TQFP package. Architecturally, the M4K core provides a 5-stage pipeline, hardware multiply/divide, single-cycle MAC, and a tightly-coupled prefetch cache, which together with the bus-matrix DDR-style peripheral interconnect delivers deterministic throughput at 80 MHz. The peripheral set (USB + CAN + 4 DMA) is well-matched to industrial protocols and human-interface designs. Typical applications include industrial control and HMI panels, USB peripherals and CAN node gateways, motor control and BLDC/PMSM drivers, embedded dataloggers, sensor hubs, and low-cost audio processing. The combination of USB device/host, CAN, and DMA makes it a flexible connectivity MCU for factory automation. When designing with the PIC32MX534F064LT-I/PF, allocate decoupling capacitance (100 nF plus 4.7 uF bulk) within 5 mm of each power pin, route the 80 MHz system trace as a 50 ohm microstrip with reference-plane stitching, and bias the internal 8 MHz FRC plus PLL if precise USB or CAN timing is required - the USB module requires 48 MHz +/- 0.25% to meet USB 2.0 full-speed accuracy. This page synthesizes distributor pricing (DigiKey/Mouser/Octopart), drop-in alternatives within the PIC32MX5xx family, and practical PCB and firmware design notes not found in the manufacturer datasheet, optimized for engineers sourcing production-grade 32-bit MCUs.

USD $5,96 En stock
PIC32MX534F064LT-I/PT - 80MHz 32-bit MCU 64KB Flash | Microchip
PIC32MX534F064LT-I/PT

PIC32MX534F064LT-I/PT - 80MHz 32-bit MCU 64KB Flash | Microchip

The Microchip Technology PIC32MX534F064LT-I/PT is a 32-bit MIPS32 M4K microcontroller operating up to 80 MHz, integrating 64 KB of flash program memory and 16 KB of SRAM in a 100-pin TQFP (12x12x1 mm) package. The part ships in tape-and-reel (T) packaging and is rated for the industrial -40C to +85C temperature range (I-grade). It includes integrated USB 2.0 full-speed and CAN 2.0b peripherals, four DMA channels, and the standard PIC32MX5xx analog/mixed-signal feature set. A 32-bit microcontroller (MCU) is a programmable processor core that executes instructions from on-chip flash memory, integrates RAM and a broad set of peripherals (USB, CAN, timers, ADC, I/O), and forms the central controller in an embedded system. Within the PIC32MX family, the MX5xx sub-family is positioned above the MX1/MX2 value line and below the MX6/MX7 high-performance line, targeting USB- and CAN-equipped industrial, medical, and consumer applications that benefit from MIPS M4K processing throughput. Key features of this part include the 80 MHz MIPS32 M4K core with 5-stage pipeline, hardware multiply/divide, single-cycle multiplication, prefetch cache, and 64 KB flash that supports live updates through the ICSP interface. The 16 KB SRAM allows reasonable data buffering without external memory, while the four DMA channels offload data movement from the CPU. The USB 2.0 full-speed on-chip transceiver and the CAN 2.0b controller reduce external component count. The 100-pin TQFP package exposes up to 85 general-purpose I/O pins and supports parallel master port (PMP) operation for external bus expansion. Typical applications include industrial USB-to-CAN bridges, HMI panels with USB device connectivity, embedded dataloggers, medical instrument controllers, and general-purpose 32-bit nodes in factory automation networks. The combination of USB device, CAN, and ample I/O makes this MCU a strong fit for industrial nodes that must communicate with both a host PC and a CAN fieldbus. Designers should plan for a 3.3V core supply with typical 2.0V-3.6V operating range, place a 10 uF plus 0.1 uF decoupling network near each power pin pair, and follow Microchip's USB hardware design guidelines (impedance-controlled 90 ohm differential routing, common-mode choke) when the USB peripheral is enabled. The 'T' suffix indicates tape-and-reel, so pick-and-place programming and full production-line rework should follow standard JEDEC MSL-3 handling.

USD $5,10 En stock
PIC32MX534F064LT-V/BG - 32-bit MCU 80MHz 64KB Flash USB OTG | Microchip
PIC32MX534F064LT-V/BG

PIC32MX534F064LT-V/BG - 32-bit MCU 80MHz 64KB Flash USB OTG | Microchip

The Microchip Technology PIC32MX534F064LT-V/BG is a 32-bit microcontroller built on the MIPS32 M4K core, operating up to 80 MHz, integrating 64 KB of Flash program memory and 16 KB of SRAM in a 121-ball TFBGA (10x10 mm) package. The "L" suffix denotes the low-pin-count USB OTG variant and the "T" indicates tape-and-reel packaging; "V/BG" specifies the V temperature grade with the TFBGA package option. The part includes a 10-bit 1 MSPS ADC, DMA controller, USB 2.0 full-speed OTG, I2C, SPI, UART, PMP, and up to 53 general-purpose I/O lines, enabling single-chip solutions for cost-sensitive embedded designs. A 32-bit microcontroller (MCU) is a microprocessor core optimized for embedded control, integrating CPU, memory, peripherals, and interrupt logic into a single IC. The PIC32MX534 family belongs to the broader MIPS32 architecture family, which sits in the taxonomy microcontroller -> embedded processor -> integrated circuit -> semiconductor. This 32-bit class offers deterministic real-time performance, larger address space, and richer peripheral integration compared to 8/16-bit MCUs while remaining significantly lower in cost than Cortex-M4 application processors. Key differentiating features include hardware DMA that offloads data movement from the CPU, full-speed USB OTG with on-chip transceiver that eliminates external PHY cost, and a 10-bit ADC capable of 1 MSPS for high-speed sensor sampling. The 80 MHz M4K core delivers 1.56 DMIPS/MHz and executes most instructions in one clock cycle, suitable for control loops, USB stacks, and graphical user interfaces with external peripherals. The device supports 2.3V to 3.6V single-supply operation, includes a Real-Time Clock calendar, and offers multiple low-power modes for battery-powered designs. Architecturally the PIC32MX5 family uses a Harvard-style memory structure with separate 32-bit instruction and data paths to the Flash and SRAM. The DMA controller supports up to 8 independent channels and triggers on peripheral events, allowing continuous USB or ADC operation without CPU intervention. The USB OTG module includes the physical layer, requiring only an external pull-up or pull-down resistor on the D+/D- lines and a few decoupling components for a compliant USB port. The part fits inside industrial control panels, USB peripherals, point-of-sale terminals, sensor hubs, medical data loggers, and consumer audio accessories. The compact 121-ball TFBGA package suits space-constrained PCB layouts such as wearable dongles and portable test instruments where a QFP would be too tall or too large. Designers select the PIC32MX534 family when balancing USB integration, deterministic interrupt latency, and Microchip's MPLAB Harmony firmware ecosystem against the lower cost of 8-bit PIC16/PIC18 parts. When designing with this device, plan for decoupling (100 nF + 1 uF near each VDD pair), keep the USB trace length under 50 mm with 90-ohm differential impedance, and configure the oscillator PLL that enables ripple-free USB clocks without overshoot. The MPLAB Harmony configurator and the PICkit 5 in-circuit debugger are the recommended toolchain for production programming and firmware development, providing validated peripheral drivers and a USB stack. This page synthesizes distributor pricing for the PIC32MX534F064LT-V/BG, drop-in alternatives within the same 121-ball TFBGA footprint, and practical layout and USB design notes that the manufacturer datasheet does not present in a single reference.

USD $4,15 En stock
PIC32MX534F064LT-V/PF - 80MHz 32-bit MCU, 64KB Flash, USB OTG | Microchip
PIC32MX534F064LT-V/PF

PIC32MX534F064LT-V/PF - 80MHz 32-bit MCU, 64KB Flash, USB OTG | Microchip

The Microchip PIC32MX534F064LT-V/PF is a 32-bit MIPS32 M4K microcontroller IC running at 80 MHz, integrating 64 KB of Flash program memory and 16 KB of SRAM, housed in a 100-pin TQFP (14x14 mm) package. It belongs to the PIC32MX5xx family, which adds a USB On-The-Go (OTG) full-speed peripheral, a 10-bit 1 Msps ADC with up to 16 channels, four DMA channels, and a CAN 2.0B controller alongside the standard PIC32MX peripherals. The '-V' suffix denotes the automotive-grade -40C to +105C operating temperature range, and the trailing 'T' indicates tape-and-reel packaging. A PIC32MX microcontroller is a MIPS-based 32-bit MCU that bridges 8/16-bit PIC legacy code to full 32-bit performance at low power. The MIPS32 M4K core executes most instructions in a single cycle, giving 1.56 DMIPS/MHz and deterministic interrupt latency. The PIC32MX5xx family sits in Microchip's mid-tier MCU hierarchy: PIC10/12/16/18 (8-bit) -> PIC24/dsPIC33 (16-bit) -> PIC32MX (32-bit) -> PIC32MZ/32MK (32-bit high performance) -> 32-bit ARM Cortex-M0+/M4/M7 (SAM). PIC32MX parts share a unified MPLAB X toolchain, Harmony framework, and peripheral library across the family. Key features of the PIC32MX534F064LT-V/PF include: 80 MHz CPU clock, 64 KB Flash with live update support, 16 KB SRAM, USB 2.0 full-speed OTG, CAN 2.0B, 10-bit 1 Msps ADC, four DMA channels, five 16-bit timers, two I2C, two SPI, and five UART. The integrated 8 MHz internal RC and 4x PLL allow flexible clocking. The 100-pin TQFP exposes 85 GPIO, ideal for HMI, motor-control and connectivity gateways. Typical applications are automotive body and infotainment modules, USB peripherals (HID, CDC, mass storage), industrial sensors with CAN-bus aggregation, and consumer audio accessories. Designers choose this part when they need a wide-temperature automotive-grade MCU with on-chip USB OTG and CAN without an external transceiver for low-speed CAN. The V/PF package is the 100-pin TQFP - for compact designs, the 64-pin TQFP (PT) variant PIC32MX534F064LT-V/PT provides the same silicon in a smaller footprint.

USD $4,55 En stock
PIC32MX550F256H-50I/MR - 50MHz 256KB Flash 32-bit MCU | Microchip
PIC32MX550F256H-50I/MR

PIC32MX550F256H-50I/MR - 50MHz 256KB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MX550F256H-50I/MR is a 32-bit MIPS M4K microcontroller with 256 KB Flash and 64 KB SRAM, operating up to 50 MHz (83 DMIPS), housed in a 64-pin QFN (9x9 mm) package with industrial -40C to +85C temperature rating. This part is part of the PIC32MX1XX/2XX/5XX 64/100-pin family and integrates USB 2.0 Full-Speed OTG, CAN 2.0B, up to three I2S/SPI modules for codec interfaces, and a Parallel Master Port (PMP) with dual read/write buffers for graphics. A 32-bit microcontroller (MCU) is an integrated processor core, program memory, data memory, and peripherals on a single die. Within the broader taxonomy of embedded semiconductors, this device belongs to the application-specific microcontroller category, which itself sits inside the integrated circuit (IC) hierarchy of power-managed mixed-signal processors used in embedded systems. Microcontrollers in the PIC32MX class target HMI (human-machine interface) applications with audio, graphics, and touch peripherals. Key differentiating features include Peripheral Pin Select (PPS) for flexible signal routing, dual CAN 2.0B modules with DeviceNet addressing, 16-channel 10-bit ADC at 1 Msps, and a Charge Time Measurement Unit (CTMU) for capacitive touch. The integrated USB 2.0 Full-Speed OTG controller enables device/host/OTG roles without external PHY. The 64-pin QFN package supports compact PCB layouts while exposing ample I/O for parallel interfaces. Architecturally, the device uses a MIPS32 M4K Harvard-style core with 5-stage pipeline, separate instruction and data paths, hardware multiply/divide, and zero overhead looping. The 50 MHz core provides 83 DMIPS, sufficient for protocol stacks and moderate DSP loads. The integrated DMA controller offloads data movement from the CPU. Typical applications include industrial control with CAN bus connectivity, USB-based human interface devices, audio playback systems using I2S codecs, and low-cost graphics terminals with PMP-driven LCDs. The PPS remapping and dual CAN modules make it suitable for automotive body electronics and building automation. When designing with this MCU, allocate at least one 10uF bulk and one 0.1uF decoupling capacitor adjacent to each power pin pair, route the 50 MHz crystal traces symmetrically, and use a 4-layer PCB with continuous ground pour under the QFN thermal pad to manage dissipation. This page consolidates distributor pricing, drop-in same-package alternates, and practical design considerations beyond the manufacturer datasheet to accelerate sourcing and design-in decisions.

USD $3,85 En stock
PIC32MX550F256H-50I/PT - 50MHz 32-bit MCU 256KB Flash | Microchip
PIC32MX550F256H-50I/PT

PIC32MX550F256H-50I/PT - 50MHz 32-bit MCU 256KB Flash | Microchip

The Microchip Technology PIC32MX550F256H-50I/PT is a 32-bit MIPS32 M4K microcontroller running up to 50 MHz delivering 83 DMIPS, with 256 KB Flash and 32 KB SRAM, integrated Full-Speed USB 2.0 OTG, CAN 2.0B with DeviceNet addressing, three I2S/SPI modules, and a Parallel Master Port (PMP) with dual buffers for graphics interfaces, all housed in a 64-pin TQFP (PT) 10x10 mm package. The Industrial (-I) suffix specifies an operating temperature range of -40C to +85C, while the -50 suffix confirms the 50 MHz top speed grade. The PIC32MX5XX family bridges mainstream 8/16-bit PIC designs to full 32-bit processing with Peripheral Pin Select (PPS) remapping for flexible board layouts. A 32-bit microcontroller is a programmable system-on-chip that integrates a CPU core, volatile and non-volatile memory, and a rich set of peripherals (timers, ADC, communication interfaces) on a single silicon die. The PIC32MX family is a key node in Microchip's product taxonomy: it sits above the 16-bit PIC24/dsPIC families and below the Cortex-M class SAM and PIC32MK parts. Designers choose PIC32MX when they want Microchip's MPLAB X toolchain maturity and PPS flexibility without paying for the higher-pin-count or higher-speed PIC32MZ/MK families. Key features of the PIC32MX550F256H-50I/PT include 256 KB Flash program memory, 32 KB SRAM data memory, a 10-bit 1 Msps ADC with up to 28 analog channels, five 16-bit timers, two I2C ports, two UARTs, three SPI modules, two I2S modules for audio codecs, USB 2.0 Full-Speed OTG with on-chip transceiver, a CAN 2.0B module with DeviceNet addressing, and the PMP graphics master port with dual read/write buffers that offload bus cycles from the CPU. Charge Time Measurement Unit (CTMU) provides capacitive touch and basic analog front-end functions, while PPS remaps most digital peripherals to any compatible I/O pin. The architecture uses a 5-stage MIPS M4K pipeline with hardware multiply/divide and a tightly coupled prefetch cache that mitigates Flash wait states at 50 MHz. The 3.3V core supply with internal regulators lets the device run directly from a 2.3V to 3.6V rail, simplifying power tree design. On-chip debug over JTAG or 2-wire programming via ICSP is supported throughout the family. Typical applications include USB peripherals and HID devices, CAN-connected industrial nodes with DeviceNet, HMI/graphic display controllers via PMP, audio streaming with I2S codecs, capacitive touch user interfaces using CTMU, and low-cost connectivity bridges for sensors. The combination of USB, CAN, and PMP also fits automotive telematics, building automation controllers, and point-of-sale terminals. A key design consideration: at 50 MHz the Flash access wait states must be configured via the system registers, and PMP timing for graphics requires careful setup of the data setup and hold registers - consult the family reference manual section on PMP for your chosen panel. Vcap pin must be left unloaded except for the required 10 uF decoupling. This page synthesizes distributor pricing, drop-in alternatives drawn from the same Microchip PIC32MX5XX family, and practical design notes not duplicated in the manufacturer datasheet.

USD $3,05 En stock
PIC32MX550F256H-I/PT - 32-bit MCU 256KB Flash 64-TQFP | Microchip
PIC32MX550F256H-I/PT

PIC32MX550F256H-I/PT - 32-bit MCU 256KB Flash 64-TQFP | Microchip

The Microchip Technology PIC32MX550F256H-I/PT is a 32-bit RISC microcontroller based on the MIPS32 M4K core, offering up to 50 MHz / 83 DMIPS performance, 256 KB of Flash program memory, and 32 KB of SRAM in a 64-pin TQFP (10x10 mm) package. The device integrates two I2S and four SPI modules for audio codec and serial communication, Peripheral Pin Select (PPS) for flexible I/O mapping, and a Parallel Master Port (PMP) with dual buffers for graphics interfaces. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and a rich set of peripherals such as timers, communication interfaces, ADCs, and GPIO into one package. The PIC32MX family sits within the broader hierarchy: microcontroller -> embedded processor -> semiconductor device. The M4K core provides a 32-bit Harvard architecture with single-cycle multiplication, deterministic interrupts, and DSP-oriented instructions, making it well suited to embedded applications requiring higher computational throughput than 8/16-bit MCUs. Key features include 256 KB Flash with 32 KB RAM, 16-channel 10-bit ADC at up to 1 Msps, USB 2.0 full-speed On-The-Go (OTG), two I2C, two UART, two I2S, four SPI, six 16-bit timers, five input-capture and five output-compare modules, a Real-Time Clock/Calendar (RTCC) with calendar mode, and a Charge Time Measurement Unit (CTMU) for capacitive touch sensing. The device supports an industrial operating temperature range of -40C to +85C. Typical applications span audio playback and processing, USB peripherals (HID, CDC, MSD, audio class), HMI panels with graphics and touch, motor control (BLDC/PMSM FOC), industrial sensing, data loggers, and home appliances. The combination of PMP for LCD control, I2S for digital audio streams, CTMU for touch keys, and USB OTG enables single-chip HMI + audio + connectivity products. When designing with this part, allocate decoupling capacitors near each power pin pair (VDD/VSS and AVDD/AVSS), follow Microchip's recommended ICSP programming footprint, and verify PPS mappings in the Harmony/MPLAB-X configuration tool. For RTCC operation, the 32.768 kHz crystal layout must observe Microchip's oscillator guidelines.

USD $3,48 En stock
PIC32MX550F256HT-50I/MR - 50MHz 32-bit MCU 256KB Flash | Microchip
PIC32MX550F256HT-50I/MR

PIC32MX550F256HT-50I/MR - 50MHz 32-bit MCU 256KB Flash | Microchip

The Microchip Technology PIC32MX550F256HT-50I/MR is a 32-bit microcontroller from the PIC32MX5xx family, featuring the MIPS32 M4K core running at up to 50 MHz (83 DMIPS). It integrates 256 KB of Flash program memory and 32 KB of SRAM, packaged in a 64-pin QFN (9x9 mm) form factor with an exposed thermal pad for enhanced thermal dissipation. A 32-bit microcontroller (MCU) is a single-chip computer that combines a 32-bit processor core, program and data memory, and a rich set of on-chip peripherals. Within the broader embedded semiconductor hierarchy it sits between 8/16-bit MCUs and application processors, offering high computational throughput (MIPS/DMIPS) while retaining deterministic real-time interrupt behavior. The PIC32MX5xx family targets cost-sensitive connected and graphical embedded applications where MIPS-class performance is required without moving to Cortex-M class pricing. Key features include two I2S audio interfaces, four SPI modules, peripheral pin select (PPS) for flexible signal routing, a parallel master port (PMP) with dual read/write buffers for graphics, an integrated charge time measurement unit (CTMU), USB 2.0 full-speed OTG, a 10-bit ADC, and multiple UART/I2C channels. The 50 MHz core delivers 83 DMIPS, and the memory sub-system pairs 256 KB Flash with 32 KB SRAM for code and data-heavy audio/display use cases. Architecturally, the device is built around the MIPS32 M4K Harvard core with a 5-stage pipeline, hardware multiply/divide, and zero-overhead looping, giving it strong C-language code density versus ARM Cortex-M0/M0+ at similar MHz. The PPS block decouples digital peripheral I/O from physical pins, allowing designers to remap UART/SPI/I2S onto most digital I/Os on the fly. The 64-QFN with EP enables compact PCB layouts suitable for space-constrained designs. Typical applications include USB audio bridges, Bluetooth/wireless audio docks, low-cost graphical HMI panels, motor control BLDC/PMSM boards, and consumer IoT hubs. It is well suited where the design needs MIPS-class code compatibility, I2S audio capture/playback, and PMP-based LCD driving simultaneously. When designing with this MCU, ensure the exposed pad is soldered to a sufficiently large copper pour for thermal relief and ground reference. Configure PPS mappings carefully because peripheral-to-pin assignments are device-dependent; consult the datasheet pin tables before board layout. Use the on-chip CTMU for capacitance touch or precise time-of-flight sensing rather than adding an external timer IC. This page synthesizes distributor pricing, same-brand drop-in alternatives in the same 64-QFN package, comparison parameters, and practical design notes not found in the manufacturer datasheet alone.

USD $3,40 En stock
PIC32MX550F256HT-V/PT - 32-bit MCU 256KB Flash 64-TQFP | Microchip
PIC32MX550F256HT-V/PT

PIC32MX550F256HT-V/PT - 32-bit MCU 256KB Flash 64-TQFP | Microchip

The Microchip Technology PIC32MX550F256HT-V/PT is a 32-bit MIPS32 M4K microcontroller with 256 KB Flash and 32 KB SRAM, housed in a 64-pin TQFP (10x10 mm) package. It operates at up to 50 MHz/83 DMIPS with a 3.3 V supply and integrates two I2S modules, four SPI, USB, CAN, three comparators, CTMU, and RTCC peripherals. A 32-bit microcontroller (MCU) is an integrated computing device that executes instructions from a 32-bit-wide architecture. PIC32MX parts sit in Microchip's MIPS-based MCU family, which has historically delivered deterministic interrupt latency and easy C-language development via MPLAB X IDE. The PIC32MX5xx sub-family specifically adds USB 2.0 full-speed, CAN 2.0B, and Peripheral Pin Select (PPS) remapping, bridging cost-sensitive 8/16-bit designs and high-performance Cortex-M parts. Key features include 256 KB single-cycle Flash, 32 KB SRAM, up to 50 MHz core clock with 83 DMIPS, Peripheral Pin Select (PPS) for flexible peripheral-to-pin mapping, Parallel Master Port (PMP) for graphics and external memory, and an automotive AEC-Q100 qualified "V" temperature grade (-40C to +125C). The CTMU provides touch sensing, capacitive measurement, and time-of-flight capability with no external components. USB and CAN make this part a drop-in fit for industrial-control and automotive sub-network nodes. The architecture uses a 5-stage MIPS32 M4K pipeline with separate instruction and data buses (Harvard), single-cycle hardware multiply, and zero-wait-state Flash access up to 50 MHz. The M4K core includes a prefetch cache that reduces flash access penalty at high bus speeds, while the configurable prefetch module lets the user balance determinism versus throughput. Typical applications include USB peripherals, CAN-bus node controllers, industrial automation HMI with PMP-driven LCDs, automotive body controllers in the AEC-Q100 grade, capacitive-touch user interfaces using CTMU, and audio streaming via I2S. The wide peripheral set reduces BOM count by integrating USB-PHY transceivers, CAN transceivers interface logic, and audio serial ports on-chip. When designing with the PIC32MX550F256HT-V/PT, use the V grade only if the application requires the -40C to +125C automotive window; otherwise the I grade (PIC32MX550F256H-I/PT) at -40C to +85C is more cost-effective for industrial and consumer designs. This page synthesizes distributor pricing, drop-in alternatives sourced from Microchip's PIC32MX family, and practical design notes that are not collocated in the manufacturer datasheet, offering a faster engineering decision path.

USD $2,41 En stock
PIC32MX550F256L-50I/PF - 50MHz 32-bit MCU 256KB Flash | Microchip
PIC32MX550F256L-50I/PF

PIC32MX550F256L-50I/PF - 50MHz 32-bit MCU 256KB Flash | Microchip

The Microchip Technology PIC32MX550F256L-50I/PF is a 32-bit MIPS M4K microcontroller running up to 50 MHz (83 DMIPS) with 256 KB Flash and 32 KB SRAM, housed in a 100-pin TQFP (14x14 mm) package. It integrates USB 2.0 Full-Speed OTG, CAN 2.0B, two I2S and four SPI modules, a Parallel Master Port (PMP) with dual read/write buffers for graphics, Peripheral Pin Select (PPS), and the Charge Time Measurement Unit (CTMU) for touch and HMI sensing. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals on a single die. Within the broader semiconductor taxonomy, an MCU belongs to the class of embedded processors, which sits under microcontrollers and then under integrated circuits (ICs). The PIC32 family uses a RISC (Reduced Instruction Set Computer) MIPS32 core and is positioned for higher-performance 32-bit embedded applications. Key features include USB 2.0 Full-Speed OTG with on-the-go host/device capability, CAN 2.0B active with DeviceNet addressing support, four I2S/SPI selectable modules, a 16-channel 10-bit ADC (1 Msps), and an operating voltage range of 2.3V to 3.6V. Industrial temperature range of -40C to +85C and the 100-pin TQFP footprint expose up to 78 GPIO-capable I/O pins, enabling connectivity-rich designs without external expanders. Architecturally, the PIC32MX5XX uses the MIPS32 M4K 32-bit core with a 5-stage pipeline and hardware multiply/divide, providing deterministic interrupt latency and predictable real-time performance. The CTMU provides constant-current source/sink capability for capacitive touch and ultrasonic measurement, and the PMP with dual buffers sustains continuous graphics frame updates without CPU intervention. Typical applications include USB peripherals and embedded hosts, CAN-connected industrial nodes, audio codec DSP front-ends, HMI panels with graphics and touch, and sensor hubs with USB-CDC virtual COM ports. The combination of USB, CAN, and PMP makes this MCU a single-chip solution for industrial/automotive HMI gateways. When designing with this device, ensure decoupling per the manufacturer datasheet (low-ESR ceramic, resonance above 20 MHz), and verify PPS remapping constraints for each peripheral. Programming requires MPLAB X IDE with XC32 compiler; ICSP and JTAG are supported. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $3,18 En stock
PIC32MX550F256L-50I/PT - 50MHz 256KB Flash MCU | Microchip
PIC32MX550F256L-50I/PT

PIC32MX550F256L-50I/PT - 50MHz 256KB Flash MCU | Microchip

The Microchip Technology PIC32MX550F256L-50I/PT is a 32-bit MIPS M4K microcontroller featuring a 50 MHz/83 DMIPS core, 256 KB Flash, and 32 KB SRAM in a 100-pin TQFP (12x12 mm) industrial-temperature package. It integrates a rich HMI-oriented peripheral set including two I²S, four SPI, USB 2.0 Full-Speed Device/Host/OTG, CAN 2.0B, and a Parallel Master Port (PMP) with dual read/write buffers for direct graphics display interfacing. Peripherals are routed through the Peripheral Pin Select (PPS) remap block, allowing flexible assignment of digital functions to a wide choice of physical pins. A microcontroller (MCU) is a single-chip computer containing a CPU core, volatile and non-volatile memory, and on-chip peripherals such as timers, communication controllers, and analog blocks. Within the broader semiconductor taxonomy, the PIC32MX550F256L belongs to 32-bit microcontroller -> RISC MCU -> embedded processor -> semiconductor. The MIPS M4K architecture is a Harvard-style RISC core widely used in cost-sensitive 32-bit embedded designs where deterministic interrupt latency, simple C/AVR-to-32-bit toolchain reuse, and broad peripheral integration reduce total BOM cost. Key features include 50 MHz core frequency, 83 DMIPS performance, 16-channel 10-bit ADC at 1 Msps, five 16-bit timers/counters, two comparators, two UARTs, RTCC with calendar mode, CTMU for capacitive touch, and dedicated audio data paths via I²S. On-chip debug uses PGECx/PGEDx pairs supporting both ICSP programming and real-time trace through standard MPLAB tools, eliminating external emulator hardware on most designs. The PIC32MX550F256L is fabricated on a low-leakage CMOS process and operates from 2.3 V to 5.5 V across the industrial -40 °C to +85 °C range. Internal DMA, dedicated context-switch shadow registers, and a configurable instruction cache support deterministic real-time response, while PMP and dual-buffered SPI allow direct TFT panel and serial-flash interfacing for HMI products. Typical applications include USB Audio/Class-D amplifiers, segment-TFT HMI panels, CAN-bridge industrial nodes, capacitive-touch control panels, and low-power graphics instrumentation. The combination of USB OTG, CAN, and audio interfaces makes it well suited for audio/graphics HMI products where a single MCU drives display, touch, USB, and fieldbus functions. When designing with this device, ensure all VDD/VSS pin pairs are decoupled with 100 nF + bulk capacitors placed within 5 mm of each pair. Decouple AVDD/AVSS separately for the ADC and use the internal bandgap reference with an external 10 µF+1 µF bypass network. Validate trace impedance on PMP and high-speed SPI lines to avoid display artifacts. This page synthesizes verified distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, helping procurement and design engineers choose the right part with parametric confidence.

USD $3,96 En stock
PIC32MX550F256L-I/PT - 256KB Flash 32-bit MCU 100-TQFP | Microchip
PIC32MX550F256L-I/PT

PIC32MX550F256L-I/PT - 256KB Flash 32-bit MCU 100-TQFP | Microchip

The Microchip Technology PIC32MX550F256L-I/PT is a 32-bit MIPS32 M4K microcontroller featuring 256 KB Flash, 32 KB SRAM, and a 40 MHz core speed (50 MHz/83 DMIPS on the -50I speed grade variant), housed in a 100-pin TQFP (12x12 mm) package. It integrates USB 2.0 full-speed, CAN 2.0B, two I2S audio interfaces, four SPI modules, two I2C modules, and a Parallel Master Port (PMP) with dual read/write buffers aimed at graphics and HMI applications. Two on-chip analog comparators and a 16-channel 1 MSPS 10-bit ADC round out the analog subsystem. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals on one die. The PIC32MX5xx family sits in the hierarchy MIPS32 -> M4K core -> PIC32 -> 32-bit microcontroller -> embedded MCU, designed to balance deterministic real-time control with the throughput required by audio decoding, USB stacks, and small graphical displays. Key features include 256 KB Flash (256K x 8), 32 KB SRAM, Peripheral Pin Select (PPS) for flexible I/O mapping, an RTCC with calendar mode, a Charge Time Measurement Unit (CTMU) for capacitive touch sensing, and a wide operating voltage of 2.5 V to 3.6 V. Industrial temperature range is -40C to +85C, matching the I/PT suffix. The architecture combines a Harvard-style M4K core with a 5-stage pipeline and hardware multiply/divide, plus a dedicated DMA controller and a 16-channel hardware crypto-free RTCC. PPS remaps most digital peripherals to nearly any I/O pin, which simplifies PCB routing when migrating between PIC32MX5xx variants and speeds up BOM consolidation. Typical applications include USB audio peripherals, CAN-connected industrial nodes, low-cost HMI panels with PMP-driven TFT displays, capacitive touch user interfaces using CTMU, and small embedded graphics controllers. The combination of two I2S ports and USB makes the part a natural fit for USB-DAC dongles and USB-to-S/PDIF bridges. When designing with this device, allocate at least 4.7 uF bulk + 0.1 uF bypass capacitors on VDD/AVDD and provide a 32.768 kHz crystal or external reference for the RTCC. Pay attention to PPS remapping in code: each peripheral function must be unlocked in the device configuration to be assigned to a physical pin. This page combines verified distributor pricing, drop-in same-package alternatives, and practical engineering design notes not consolidated on the manufacturer datasheet, giving procurement and embedded engineers a single reference for BOM decisions.

USD $3,78 En stock
PIC32MX550F256L-V/PF - 32-bit MCU, 256KB Flash, USB/CAN | Microchip
PIC32MX550F256L-V/PF

PIC32MX550F256L-V/PF - 32-bit MCU, 256KB Flash, USB/CAN | Microchip

The Microchip Technology PIC32MX550F256L-V/PF is a 32-bit MIPS MCU from the PIC32MX1XX/2XX/5XX 64/100-pin family, featuring a MIPS32 M4K core running up to 50 MHz / 83 DMIPS, 256 KB Flash and 32 KB SRAM in a 100-pin TQFP (14x14 mm) package. Integrated peripherals include a USB 2.0 Full-Speed OTG controller, a CAN 2.0B module with DeviceNet addressing support, two I2S and four SPI modules for codec and serial communications, a Parallel Master Port (PMP) with dual read/write buffers for graphics interfaces, and Peripheral Pin Select (PPS) for flexible I/O mapping. The -V temperature grade targets -40C to +105C operation, suitable for industrial environments. A 32-bit microcontroller (MCU) is a single-chip processor that integrates CPU, memory (Flash/RAM), and programmable peripherals. MCUs sit at the foundation of embedded systems, sitting hierarchically under the broader category of microcontrollers, then embedded processors, then semiconductors. The PIC32MX family specifically uses the MIPS32 instruction set, which differs architecturally from ARM Cortex-M cores while offering competitive code density and deterministic interrupt latency. Key features include 50 MHz core with single-cycle multiply, hardware multiply/divide, 16-bit wide instruction path, 5-channel DMA, four 16-bit timers/captures, five UART modules, two comparators, CTMU (Charge Time Measurement Unit), RTCC, and an 8-bit Parallel Master Port. The PPS system remaps digital peripherals to most I/O pins, simplifying PCB layout. Typical applications include industrial USB device controllers, CAN-based automotive node ECUs, low-cost HMI panels with PMP-driven LCDs, audio codecs bridging via I2S, and embedded point-of-sale terminals. The integrated USB OTG plus CAN combination is rare in this price tier and is the primary differentiator versus PIC32MX4xx/2xx parts that lack USB or CAN. When designing with this device, observe the 100-pin TQFP land pattern, ensure 3.3V rail decoupling within 5 mm of every VDD/VSS pair, and reserve JTAG/PGD/PGC test access per the Microchip programming specification. For CAN bus termination, add a 120 ohm resistor at each node end.

USD $4,65 En stock
PIC32MX550F256L-V/PT - 256KB Flash 32-bit MCU USB CAN | Microchip
PIC32MX550F256L-V/PT

PIC32MX550F256L-V/PT - 256KB Flash 32-bit MCU USB CAN | Microchip

The Microchip Technology PIC32MX550F256L-V/PT is a 32-bit MIPS32 M4K microcontroller delivering 83 DMIPS at 50 MHz, integrating 256 KB Flash and 32 KB SRAM in a 100-pin TQFP (PT) package with USB 2.0 Full-Speed OTG and CAN 2.0B peripherals. The part is qualified for AEC-Q100 automotive applications and is rated for the -40C to +105C extended automotive temperature range. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals on a single silicon die. The PIC32MX5XX family specifically targets connected-embedded designs that require full-speed USB and graphic HMI capability. Within the broader taxonomy, this part is a 32-bit MCU -> embedded processor -> semiconductor, sitting in Microchip's PIC32MX1XX/2XX/5XX 64/100-pin family alongside the smaller MX1/MX2 derivatives. Key features include a USB 2.0-compliant full-speed On-The-Go controller, a CAN 2.0B module with DeviceNet addressing support, two I2S and four SPI modules for audio codecs and serial communications, a Peripheral Pin Select (PPS) function for flexible remapping, and a Parallel Master Port (PMP) with dual read/write buffers for graphics interfaces. The -V/PT suffix denotes the 100-pin TQFP (12x12 mm) package and the -40C to +105C operating range. The M4K core executes most instructions in a single cycle, has a five-stage pipeline, and supports MIPS16e code compression to reduce Flash footprint. The integrated 256 KB Flash and 32 KB SRAM are joined by dedicated DMA channels and a 10-bit number peripherals whose accuracy/throughput meet typical industrial-sensing needs. Typical applications include automotive infotainment HMI, CAN-connected industrial sensor hubs, USB device/host bridges, low-cost graphic displays using PMP, and audio streaming designs using the I2S codec interface. For each, the combination of USB, CAN, and PMP eliminates the need for separate bridge ICs. When designing with this device, place a 10 uF bulk plus 0.1 uF decoupling capacitor pair near each power pin and route the 48 MHz primary oscillator trace symmetrically with a ground pour on both sides to preserve USB signal integrity. This page synthesizes distributor pricing, AEC-Q100 cross-references, and practical design notes beyond the manufacturer datasheet to help procurement and firmware engineers qualify a replacement.

USD $4,38 En stock
PIC32MX550F256LT-50I/PT - 50MHz 32-bit MCU 256KB Flash | Microchip
PIC32MX550F256LT-50I/PT

PIC32MX550F256LT-50I/PT - 50MHz 32-bit MCU 256KB Flash | Microchip

The Microchip PIC32MX550F256LT-50I/PT is a 32-bit MIPS M4K microcontroller running at 50 MHz delivering 83 DMIPS, with 256 KB Flash and 32 KB SRAM, housed in a 100-pin TQFP (12x12 mm) industrial-temperature package. It integrates USB 2.0 full-speed On-The-Go, two I2S audio interfaces, four SPI modules, three comparators, a Charge Time Measurement Unit (CTMU), and a Real-Time Clock Calendar (RTCC). The 'L' suffix denotes the 100-pin variant and 'T' denotes Tape & Reel. A PIC32MX microcontroller is a 32-bit MIPS-based MCU from Microchip's PIC32 family, which sits between the 8-bit PIC16/PIC24 families and higher-performance MIPS cores. It is a Harvard-architecture MCU combining deterministic interrupt response with M4K pipeline efficiency, designed for embedded control and connectivity. Within Microchip's taxonomy, PIC32MX belongs to the 32-bit MCU category -> microcontroller -> embedded processing IC -> semiconductor. It is widely used as a cost-effective, low-power 32-bit platform for industrial, consumer, and audio bridging applications. Key features include 50 MHz / 83 DMIPS core speed, 256 KB Flash program memory, 32 KB SRAM, Peripheral Pin Select (PPS) for flexible pin mapping, Parallel Master Port (PMP) with dual read/write buffers for graphics interfaces, 5-bit parallel master port, USB 2.0 FS OTG, two I2S, four SPI, two I2C, five UART, 16-bit timers, 10-bit ADC at 1 Msps, and CTMU for capacitive touch sensing. The 100-pin TQFP exposes up to 85 digital I/O, which is more than the 64-pin equivalents remain useful for. The PIC32MX550F256L silicon uses the MIPS32 M4K core with single-cycle hardware multiply and zero-overhead loop instructions, achieving 1.66 DMIPS/MHz. The 256 KB Flash is single-voltage programmable with 20K erase cycles endurance, and 32 KB SRAM supports DMA without CPU load. The USB 2.0 FS OTG PHY is integrated on-chip, eliminating the need for an external PHY. PMP enables connection to graphics controllers and external parallel memory or bus peripherals. Typical applications include USB audio interfaces (USB-to-I2S bridges), industrial HMI with graphics, capacitive-touch user interfaces using CTMU, sensor hubs with USB-CDC or USB-HID, digital signage controllers, and consumer audio docks. Exact line-to-line pin compatibility with smaller PIC32MX variants is achieved through PPS remapping. When designing with this part, observe the 2.3V-3.6V VDD range and provide a 12 MHz or 24 MHz crystal for the primary oscillator with USB operation requiring 48 MHz PLL lock.

USD $4,20 En stock
PIC32MX550F256LT-I/GJX - 50MHz 256KB Flash 32-bit MCU | Microchip
PIC32MX550F256LT-I/GJX

PIC32MX550F256LT-I/GJX - 50MHz 256KB Flash 32-bit MCU | Microchip

The Microchip PIC32MX550F256LT-I/GJX is a 32-bit MIPS M4K microcontroller operating up to 50 MHz delivering 83 DMIPS, with 256 KB Flash and 32 KB SRAM, housed in a 100-pin TFBGA (7x7 mm) package. It integrates two I2S modules for audio codec interfacing, four SPI/I2S modules, USB, CAN 2.0, three analog comparators, a 16-channel 10-bit ADC, CTMU (Charge Time Measurement Unit), DMA, RTCC, PMP for graphics, and a 16-bit Parallel Master Port with dual read/write buffers. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals on a single silicon die. PIC32MX5xx devices occupy the mid-range of Microchip's 32-bit PIC32 portfolio, sitting between the entry-level PIC32MX1/2xx series and the higher-performance PIC32MX3/5xx/6xx and PIC32MZ lines. The 100-pin TFBGA package places them in the higher pin-count tier alongside PIC32MX530/534/570 families. Key features of this part include the MIPS32 M4K core with 5-stage pipeline, Peripheral Pin Select (PPS) remapping for flexible I/O, a 16-channel 10-bit 1 Msps ADC, full-speed USB 2.0 device/host/OTG, CAN 2.0B, RTCC with calendar, and a JTAG/ICSP debug interface. The 256 KB Flash supports 10,000 erase/write cycles minimum, and 32 KB SRAM provides ample headroom for protocol stacks, audio buffers, and graphics frame data. The architecture is Harvard-style with separate Flash and SRAM buses, allowing simultaneous instruction fetch and data access. PPS allows nearly all digital peripheral pins to be remapped to a wide set of I/O, easing pin conflicts and simplifying PCB routing for dense designs. The CTMU enables touch sensing, capacitive proximity measurement, and precision time-of-flight measurement. Typical applications include industrial HMI with graphical displays, USB audio devices using the I2S interface, automotive body controllers using the CAN 2.0 peripheral, point-of-sale terminals, medical instrumentation with RTCC for timestamping, and consumer products requiring low-power operation. The 100-pin TFBGA package is ideal for compact designs where board area is at a premium. When designing with this device, route the TFBGA 100-pin package carefully on a 4-layer or higher PCB, maintain adequate decoupling (100 nF + bulk 4.7 uF per VDD pair), and use the JTAG/ICSP pins for in-circuit debugging via MPLAB Snap or ICD. The wide VDD range of 2.3V to 3.6V allows direct battery or USB-powered operation. This page synthesizes distributor pricing, drop-in same-package alternatives from Microchip's own PIC32MX5xx family, and practical design notes drawn from Microchip application notes not duplicated in the manufacturer datasheet alone.

USD $5,06 En stock
PIC32MX550F256LT-I/PT - 32-bit MCU 256KB Flash 32KB RAM | Microchip
PIC32MX550F256LT-I/PT

PIC32MX550F256LT-I/PT - 32-bit MCU 256KB Flash 32KB RAM | Microchip

The Microchip Technology PIC32MX550F256LT-I/PT is a 32-bit MIPS32 M4K microcontroller with 256KB Flash, 32KB RAM, running up to 50 MHz (83 DMIPS), packaged in a 100-pin TQFP (12x12 mm). It integrates USB 2.0 full-speed device/host/OTG, two I2S, four SPI, two I2C, and a CAN 2.0B interface, making it a connectivity-rich general-purpose MCU. The 'L' suffix denotes the 100-pin variant, and 'T' denotes tape-and-reel packaging. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory (Flash), data memory (SRAM), and configurable peripherals into one package. The PIC32MX5xx family uses the MIPS32 M4K RISC architecture, sitting within the broader hierarchy of microcontrollers -> embedded controllers -> semiconductor ICs. It targets applications needing USB connectivity, graphical user interfaces (via PMP), and moderate DSP performance in a single chip. Key features include 256KB Flash with live update support, 32KB SRAM, 8-channel DMA, 16-bit Parallel Master Port (PMP) with dual read/write buffers for graphics, Peripheral Pin Select (PPS) for flexible peripheral pin mapping, USB 2.0 full-speed with on-chip transceiver, CTMU for touch sensing, RTCC with calendar/timestamp, and six UART modules. The industrial temperature range is -40C to +85C, suitable for harsh-environment embedded systems. The PIC32MX550 uses a 5-stage MIPS32 M4K pipeline with single-cycle multiply, hardware divide, and an enhanced JTAG debug port. The 256KB Flash supports self-programming for bootloader/field-update use cases, and 32KB SRAM (with up to 4KB DMA-allocated) provides ample headroom for USB stacks, graphics framebuffers, and TCP/IP. The integrated 1.5 kB instruction cache and pre-fetch buffer accelerate Flash execution. Typical applications include USB peripherals (barcode scanners, POS terminals), industrial control with CAN connectivity, low-cost graphical HMI panels, audio streaming devices via I2S, and embedded web servers. The wide peripheral set reduces external component count, lowering BOM cost in space-constrained designs. When designing with this MCU, allocate pins carefully using Peripheral Pin Select - default pin mappings may conflict with USB or PMP pins. Provide a stable 24 MHz crystal or use the internal 8 MHz FRCDIV oscillator with USB FS mode requiring 48 MHz PLL accuracy. Decouple all VDD/VSS pairs with 100 nF ceramic capacitors placed within 3 mm of each pin pair. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone, with same-brand Microchip variants (PIC32MX550F256L-I/PT, PIC32MX550F256LT-50I/PT, PIC32MX570F256L-I/PT, PIC32MX270F512L-I/PT) listed in priority order for drop-in replacement.

USD $4,16 En stock
PIC32MX550F256LT-V/PF - 32-bit 256KB Flash MCU | Microchip 100-TQFP
PIC32MX550F256LT-V/PF

PIC32MX550F256LT-V/PF - 32-bit 256KB Flash MCU | Microchip 100-TQFP

The Microchip Technology PIC32MX550F256LT-V/PF is a 32-bit MIPS32 M4K microcontroller with 256 KB Flash and 32 KB SRAM, operating up to 40 MHz, housed in a 100-pin TQFP (14x14 mm) package. It integrates USB 2.0 full-speed, CAN 2.0B, three comparators, CTMU, RTCC, and 10-bit ADC, and is AEC-Q100 qualified for automotive applications. A 32-bit microcontroller (MCU) is an embedded computing device that integrates a CPU core, program and data memory, and a rich set of on-chip peripherals into a single silicon die. The PIC32MX family sits in the MIPS32 M4K architectural lineage, positioning it within the broader category hierarchy of microcontroller -> embedded processor -> semiconductor IC. Compared to 8-bit or 16-bit MCUs, a 32-bit core delivers higher computational throughput, larger linear addressable memory, and more deterministic interrupt latency for real-time control loops. Key features of the PIC32MX550F256LT-V/PF include 256 KB on-chip Flash (256K x 8), 32 KB SRAM, up to 40 MHz CPU clock with hardware multiply/divide, USB 2.0 full-speed device/host/OTG, a CAN 2.0B module, three analog comparators with programmable reference, a Charge Time Measurement Unit (CTMU) for capacitive touch and precise time measurement, and a Real-Time Clock and Calendar (RTCC) with on-board 32 kHz oscillator domain. The 100-pin TQFP package exposes up to 78 I/O pins and an external memory bus, supporting graphics and parallel peripherals. Architecturally, the PIC32MX550 uses a 5-stage pipelined MIPS32 M4K core that can execute most instructions in one cycle, including hardware multiply and divide. The device operates from 2.3V to 3.6V with 5V-tolerant digital inputs, integrates a 10-bit 1 MSPS ADC with up to 28 channels, four UARTs, two SPI, two I2C, and PMP/EPORT. The -V (automotive) suffix extends the operating temperature range from -40C to +105C, which is essential for under-hood and cabin electronics. Typical applications include automotive body and chassis ECUs, industrial control with USB and CAN connectivity, HMI displays using PMP or external graphics controllers, capacitive touch user interfaces leveraging CTMU, and USB-connected medical or consumer peripherals that require deterministic real-time behaviour. Designers should plan for 3.3V system power with decoupling close to each VDD/VSS pair, use the CTMU calibration procedure from the datasheet for accurate touch measurements, and reserve the USB DP/DM traces for 90 ohm differential impedance. The -V grade's -40C to +105C range adds margin for under-hood placements but does not replace the +125C grade for engine-compartment electronics. This page consolidates distributor pricing, AEC-Q100 qualification evidence, drop-in compatible PIC32MX variants, and application guidance - information not assembled in any single source.

USD $4,55 En stock
PIC32MX550F256LT-V/PT - 32-bit MCU 256KB Flash TQFP-100 | Microchip
PIC32MX550F256LT-V/PT

PIC32MX550F256LT-V/PT - 32-bit MCU 256KB Flash TQFP-100 | Microchip

The Microchip Technology PIC32MX550F256LT-V/PT is a 32-bit MIPS32 M4K microcontroller integrating 256 KB of Flash, 32 KB of RAM, and a rich peripheral set in a 100-pin TQFP (12x12 mm) package. It runs up to 40 MHz (83 DMIPS) and is rated for the automotive V temperature range of -40C to +105C, as confirmed by the 'V' speed/grade suffix and the Microchip part decoder. The 'L' denotes the high-pin-count variant, and 'T' indicates tape-and-reel packaging. A 32-bit microcontroller (MCU) is a single-chip processor that integrates a CPU core, program memory, data memory, and configurable peripherals into one package. Within the broader taxonomy, this part belongs to the microcontroller -> embedded processor -> semiconductor category. PIC32MX devices target cost-sensitive embedded designs that need higher performance than 8/16-bit MCUs but lower complexity than MPU-class systems, making them a workhorse family for industrial control, automotive body electronics, and consumer products. Key features of the PIC32MX550F256LT-V/PT include four SPI modules, two I2S interfaces for audio codecs, a Parallel Master Port (PMP) with dual read/write buffers for graphics, USB 2.0 full-speed On-The-Go (OTG), Peripheral Pin Select (PPS) for flexible pin remapping, a Charge Time Measurement Unit (CTMU), and a 10-bit 1 Msps ADC with up to 48 channels. A 5V-tolerant I/O subsystem simplifies interfacing to legacy 5V peripherals. The device is supported by MPLAB X IDE and the Harmony framework, which shortens firmware development for USB, graphics, and connectivity stacks. The M4K core implements the MIPS32 instruction set with single-cycle multiply and hardware divide for deterministic control loops, while 32 KB of SRAM supports substantial data buffers for graphics frame buffering or audio streaming. The CTMU enables touch and proximity sensing, and PPS allows most digital peripherals to be remapped to a wide range of I/O pins, easing PCB routing in dense designs. Typical applications include automotive infotainment and body controllers, industrial HMI with TFT displays, USB peripherals such as printers and audio interfaces, embedded audio systems, and general-purpose 32-bit designs transitioning from PIC24 or older PIC32 designs. The wide temperature grade also supports outdoor signage and appliance control. When designing with this device, ensure the 2.3V-3.6V supply is decoupled with 100 nF plus 4.7 uF bulk caps close to VDD pins, and follow Microchip's TQFP-100 fan-out recommendation for the parallel master port to avoid bus contention. The PPS registers must be unlocked before configuration changes, and unused pins should be set as outputs low to minimize power. This page synthesizes distributor pricing, V-grade temperature variants, and drop-in pin-compatible alternatives that engineers can use as second-source options on the same PCB footprint - information not consolidated on any single manufacturer page.

USD $5,48 En stock