Microcontroladores

Productos (18688)

PIC32MX570F512H-50I/PT - 50MHz 512KB Flash MCU w/ USB & CAN | Microchip
PIC32MX570F512H-50I/PT

PIC32MX570F512H-50I/PT - 50MHz 512KB Flash MCU w/ USB & CAN | Microchip

The Microchip PIC32MX570F512H-50I/PT is a 32-bit MIPS32 M4K microcontroller running at up to 50 MHz (83 DMIPS), with 512 KB Flash and 64 KB SRAM in a 64-pin TQFP (10x10 mm) package, designed for industrial -40C to +85C operation. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and peripherals such as timers, communication interfaces, and analog blocks. The PIC32MX570F512H belongs to Microchip's PIC32MX5xx family, which sits in the broader hierarchy of 32-bit MCU -> embedded processor -> semiconductor IC. This class of device is typically used when 8-bit MCUs lack the performance and when Linux-capable application processors are over-spec, occupying the sweet spot for connected consumer, industrial HMI, and audio processing designs. Key features include a USB 2.0 Full-Speed On-The-Go controller, a CAN 2.0B module with DeviceNet addressing, three I2S/SPI modules for audio codecs and serial communications, Peripheral Pin Select (PPS) for flexible signal routing, a Parallel Master Port (PMP) with dual read/write buffers for graphics interfaces, and a 10-bit ADC. The device supports 83 DMIPS, giving headroom for DSP-style inner loops on audio buffers or PID control loops. The MIPS32 M4K core is a 5-stage pipeline with hardware multiply/divide and a tightly-coupled prefetch buffer that delivers deterministic interrupt response - well-suited to USB Full-Speed isochronous audio streams. The integrated full-speed USB OTG transceiver eliminates the need for an external PHY, while the CAN 2.0B controller with DeviceNet filtering simplifies industrial networking integration. Typical applications include USB audio streaming devices (headsets, USB DACs), CAN-based industrial sensor nodes, HMI panels with PMP-driven TFT displays, and low-cost embedded web servers using the integrated 10/100 Ethernet MAC. The PIC32MX570F512H-50I/PT is also widely used in PIC32 Bluetooth LE audio accessory reference designs. When designing with this MCU, allocate one of the four available I2S modules to the audio data path, use the USB ID pin for OTG role detection, and place a 12 MHz crystal within 10 mm of the OSC1/OSC2 pins to keep the PLL loop stable. The 50 MHz / 50I suffix denotes industrial temperature range; choose the 40 MHz base variant for cost-sensitive consumer products.

USD $4,11 En stock
PIC32MX570F512H-I/MR - 50MHz 512KB Flash 32-bit MCU | Microchip
PIC32MX570F512H-I/MR

PIC32MX570F512H-I/MR - 50MHz 512KB Flash 32-bit MCU | Microchip

The Microchip PIC32MX570F512H-I/MR is a 32-bit microcontroller based on the MIPS32 M4K core, delivering up to 50 MHz / 83 DMIPS of processing performance with 512 KB of Flash and 64 KB of SRAM, housed in a 64-pin QFN (9x9 mm) package with exposed thermal pad. It integrates a Full-Speed USB 2.0 OTG controller, a CAN 2.0B module with DeviceNet addressing support, and three I2S/SPI modules for codec and serial communications. The suffix “I” designates the industrial -40C to +85C temperature range and “MR” designates the QFN-64 package. A 32-bit microcontroller (MCU) is an integrated circuit that combines a 32-bit processor core, program memory (Flash), data memory (SRAM), and a rich set of peripherals on a single die. The PIC32MX5XX family sits in Microchip's PIC32 lineup between microcontrollers (an application-specific family) and 32-bit MIPS microAptiv/M4K core architecture, optimized for mixed-control and connectivity applications such as HMI, audio playback, USB peripherals, and CAN-based industrial nodes. Compared with simpler 8/16-bit MCUs, the PIC32MX570 provides higher computational headroom plus integrated high-bandwidth peripherals. Key differentiating features include the Peripheral Pin Select (PPS) system that remaps most digital peripherals to virtually any I/O pin, a Parallel Master Port (PMP) with dual read/write buffers suited to drive TFT LCDs for graphics interfaces, a 16-channel 10-bit 1 Msps ADC, four SPI/I2S modules, five UART modules, and an integrated charge time measurement unit (CTMU) for touch sensing. The CTMU configuration combined with PPS reduces BOM cost by eliminating external muxes for capacitive-touch keypads. The architecture combines a 5-stage pipeline M4K core with single-cycle multiply, hardware multiply-accumulate, and tightly-coupled peripherals. The 512 KB Flash and 64 KB SRAM configuration supports full TCP/IP stacks (e.g., Microchip's MPLAB Harmony) plus USB host/device stacks concurrently, while the 16-bit parallel PMP bus can stream pixel data to a TFT at frame rates required for menus and audio UI. The 2.5V / 3.3V operating voltage is selected at Flash-programming time. Typical applications include USB audio/HID peripherals (USB headphone amps, MIDI controllers), CAN-connected industrial sensors, TFT-based HMI panels with touch, IoT gateways with USB device mode, and audio playback devices that decode MP3/AAC using libraries in Harmony. The PIC32MX570F512H-I/MR fits these because its USB OTG + I2S + CTMU + PMP combination replaces several discrete ICs. When designing with this device, allocate PPS pins carefully: most peripherals share pins via the PPS register map and a single function can only be mapped to one pin at a time. Use MPLAB Harmony or MPLAB Code Configurator to manage pin assignments and avoid conflicts between USB D+/D-, I2S word/clock, and PMP data/control lines. This page synthesizes distributor pricing, drop-in PIC32MX5XX family alternatives, and practical design notes not found in the manufacturer datasheet alone.

USD $4,32 En stock
PIC32MX570F512H-I/PT - 32-bit MCU, 512KB Flash, 64-TQFP | Microchip
PIC32MX570F512H-I/PT

PIC32MX570F512H-I/PT - 32-bit MCU, 512KB Flash, 64-TQFP | Microchip

The Microchip PIC32MX570F512H-I/PT is a 32-bit PIC32MX microcontroller built on the MIPS32 M4K core, delivering up to 50 MHz / 83 DMIPS of processing performance with 512 KB of Flash and 64 KB of SRAM in a 64-pin TQFP (10x10 mm) package. It integrates two I2S interfaces, four SPI modules, USB 2.0 full-speed, CAN, and a Parallel Master Port (PMP) with dual buffers for graphics interfacing, alongside Peripheral Pin Select (PPS) for flexible signal routing. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals onto one silicon die, used to embed control logic in everything from consumer appliances to industrial drives. The PIC32MX family belongs to the broader 32-bit MCU taxonomy (32-bit microcontroller -> RISC MCU -> embedded controller -> semiconductor IC). Within Microchip's portfolio, the MX5xx sub-family is positioned for HMI-rich designs (audio, graphics, touch sensing) where generous SRAM, USB, and CAN are required without migrating to a Cortex-M class device. Key features of the PIC32MX570F512H include 512 KB Flash with 12 KB auxiliary Flash, 64 KB SRAM, a 16-channel 10-bit ADC (1 Msps), five 16-bit timers, two comparators, two I2C modules, two UART modules, an RTCC, a CTMU for touch/keypad applications, and a JTAG-compatible debugging interface (ICSP). It also supports an internal 8 MHz oscillator with PLL scaling up to 50 MHz, reducing external crystal count on compact boards. Architecturally, the MIPS M4K core is a 5-stage pipeline RISC design with hardware multiply/divide and zero-overhead loops. Combined with the dual-buffer PMP, this allows the MCU to drive graphical displays while keeping CPU cycles available for application logic. USB and CAN peripherals each have dedicated DMA channels, offloading bus traffic from the core. Typical applications include USB audio docks, HMI panels with TFT displays and resistive touch, CAN-enabled industrial sensor nodes, and low-cost embedded graphics controllers for white goods. The wide operating voltage (2.3 to 3.6 V) and industrial temperature range (-40 °C to +85 °C for the I-grade variant) make it equally suited to indoor consumer and outdoor industrial enclosures. When designing with this part, plan the pin allocation using the PPS feature early, since most digital peripherals can be remapped to multiple I/O sets - this simplifies PCB routing when the same board is reused across variants. Ensure the 64-pin TQFP land pattern is matched by the selected footprint and that the trace lengths to the USB D+/D- lines are 90-ohm differential and kept under 50 mm for full-speed compliance. This page consolidates distributor stock and pricing, validated drop-in alternatives from the PIC32MX family, and practical design notes beyond what the manufacturer datasheet alone offers, helping engineers shorten sourcing and design cycles for new product builds.

USD $5,07 En stock
PIC32MX570F512H-V/PT - 32-bit MCU, 512KB Flash, USB, CAN | Microchip
PIC32MX570F512H-V/PT

PIC32MX570F512H-V/PT - 32-bit MCU, 512KB Flash, USB, CAN | Microchip

The Microchip Technology PIC32MX570F512H-V/PT is a 32-bit MIPS microcontroller based on the MIPS32 M4K core, delivering up to 50 MHz / 83 DMIPS of compute performance with 512 KB of Flash and 64 KB of SRAM, housed in a 64-pin TQFP (PT) 10x10 mm package with USB 2.0 Full-Speed OTG, CAN 2.0B, three I2S/SPI modules, Parallel Master Port (PMP), Peripheral Pin Select (PPS), and a Charge Time Measurement Unit (CTMU). A 32-bit microcontroller (MCU) is a single-chip computer that integrates a 32-bit CPU core, program and data memory, and a configurable set of peripheral interfaces (UART, SPI, I2C, USB, timers, ADC, etc.) into one device. PIC32MX570 devices sit in the broader hierarchy of MCU -> 32-bit MCU -> MIPS32 architecture -> Microchip PIC32 family -> PIC32MX5xx sub-family, and they target cost-sensitive applications that require USB and CAN connectivity alongside substantial code space. Key features include 512 KB single-voltage Flash with live update support, 64 KB SRAM, USB 2.0 Full-Speed On-The-Go controller, CAN 2.0B with DeviceNet addressing, three I2S/SPI modules for codec and serial communication, Parallel Master Port (PMP) with dual read/write buffers for graphics, Peripheral Pin Select (PPS) for flexible signal routing, and an integrated CTMU for capacitive touch sensing. The device operates from a 2.3 V to 3.6 V supply, includes a 10-bit 1 Msps ADC with up to 28 channels, multiple 16-bit timers, four UART channels, two I2C channels, and an RTCC. The -V/PT suffix denotes the V temperature grade (-40C to +105C) in the 64-pin TQFP (PT) package, suiting industrial and extended-commercial designs. Typical applications include USB audio interfaces, CAN-based industrial control nodes, HMI panels with touch sensing, graphics-enabled control boards, and USB/CAN bridging gateways. Its combination of USB, CAN, and ample Flash makes it a strong fit for connected industrial and embedded designs. When designing with this device, observe the decoupling guidance in the PIC32MX1XX/2XX/5XX 64/100-pin family datasheet: place 0.1 uF and 1 uF ceramics close to every VDD/VSS pair and route the USB DP/DM pair with 90 ohm differential impedance. The CTMU and PPS features must be configured in software before first use to ensure correct pin function assignment. This page synthesizes distributor pricing, AEC-Q100 grade comparisons, drop-in same-package alternatives, and practical design notes not consolidated on the manufacturer datasheet or distributor catalog pages.

USD $4,78 En stock
PIC32MX570F512HT-50I/PT - 50MHz 512KB Flash MCU | Microchip
PIC32MX570F512HT-50I/PT

PIC32MX570F512HT-50I/PT - 50MHz 512KB Flash MCU | Microchip

The Microchip Technology PIC32MX570F512HT-50I/PT is a 32-bit MIPS32 M4K microcontroller running up to 50 MHz / 83 DMIPS, integrating 512 KB Flash and 64 KB SRAM in a 64-pin TQFP (10x10 mm) package with industrial -40C to +85C temperature grade. The 'T' suffix indicates Tape and Reel packaging, while 'HT' denotes the 64-pin TQFP package and '50I' specifies 50 MHz operation with industrial temperature range. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and peripherals such as timers, communication interfaces, and analog blocks. The PIC32MX5xx family belongs to Microchip's PIC32 line, which combines MIPS M4K RISC architecture with rich peripheral integration, bridging 8/16-bit PIC microcontrollers and high-performance MPU-class devices. The MX570 sits in the mid-range Flash density tier (512 KB) with USB 2.0 full-speed OTG, two I2S, four SPI/I2S, PMP, and CTMU peripherals. Key features include 50 MHz / 83 DMIPS core performance, 512 KB Flash with 64 KB RAM, 49 I/O pins with Peripheral Pin Select (PPS) remappable functions, two I2S modules for audio codecs, four SPI and four I2C interfaces, USB 2.0 full-speed OTG with dedicated DMA, a 10-bit 1 Msps ADC with 28 channels, a Parallel Master Port (PMP) with dual buffers for graphics, a Charge Time Measurement Unit (CTMU) for capacitive touch, and a 16-bit Parallel Port. Hardware multipliers/Dividers and a 5-stage pipeline execute DSP-like operations efficiently. The architecture uses a Harvard-style 5-stage pipeline with separate instruction and data paths, plus a tightly coupled prefetch module that hides Flash latency. USB 2.0 full-speed OTG, two I2S interfaces, and PMP with dual buffers enable direct interfacing to audio CODECs, USB devices, and graphical LCDs without external logic, simplifying BOM. PPS remapping lets designers route digital functions to any GPIO pin, simplifying PCB layout and routing. Typical applications include industrial control panels, USB-capable embedded devices (HID, CDC, MSD), audio playback modules with I2S CODECs, low-cost graphical HMI with PMP-driven LCDs, capacitive touch user interfaces using CTMU, and IoT edge nodes requiring USB connectivity. The wide peripheral set is well suited to consumer and industrial products that need USB, audio, and graphics in a single chip. Design consideration: PPS remapping allows function-to-pin routing but each physical pin still has limited simultaneous function sets; verify the desired combination in the pin tables before committing to a pinout. For USB applications, the VBUS pin must be conditioned per the device errata and DP/DPU lines routed as a 90 ohm differential pair with proper guard traces. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and design considerations not found in the manufacturer datasheet, optimized for engineers selecting an MCU for USB + audio + graphics applications.

USD $4,41 En stock
PIC32MX570F512HT-I/MR - 32-bit MCU 512KB Flash 64KB RAM 50MHz 64-QFN | Microchip
PIC32MX570F512HT-I/MR

PIC32MX570F512HT-I/MR - 32-bit MCU 512KB Flash 64KB RAM 50MHz 64-QFN | Microchip

The Microchip Technology PIC32MX570F512HT-I/MR is a 32-bit MIPS MCU built on the MIPS32 M4K core, delivering up to 50 MHz / 83 DMIPS performance with 512 KB Flash and 64 KB RAM in a 64-pin QFN (9x9 mm) package. The part is tape-and-reel packaged, industrial temperature grade (-40C to +85C), and integrates USB 2.0 Full-Speed, CAN, and three analog comparators plus CTMU and RTCC peripherals. What is a PIC32MX MCU? The PIC32MX family from Microchip is a series of 32-bit microcontrollers based on the MIPS32 M4K architecture, sitting within the broader PIC microcontroller family. These MCUs bridge 8/16-bit PIC legacy to 32-bit performance, used in applications needing USB, CAN, and richer peripherals while staying within the MPLAB X / Harmony toolchain. They are widely adopted in industrial control, consumer audio, IoT edge nodes, and human-machine interface designs. Key features of the PIC32MX570F512HT-I/MR include two I2S interfaces for digital audio, four SPI modules, Peripheral Pin Select (PPS) for flexible signal routing, a Parallel Master Port (PMP) with dual read/write buffers for graphics interfaces, and a 10-bit ADC with up to 1 Msps conversion rate. The on-chip CTMU supports capacitive touch sensing and time measurement, while RTCC provides real-time clocking for low-power always-on domains. Architecturally, the device uses a 5-stage pipeline MIPS32 M4K core with hardware multiply/divide, single-cycle 32-bit ALU, and pre-fetch cache, executing most instructions in one clock cycle. The 512 KB Flash is organized as 256K x 16 with prefetch, and the 64 KB SRAM supports DMA access via four channels, offloading CPU bandwidth for high-throughput peripherals such as USB and PMP graphics. Typical applications include industrial HMI panels with TFT-LCD graphics via PMP, USB audio interfaces using I2S, automotive infotainment peripherals (CAN + USB), home automation gateways with capacitive touch keypads, and low-cost medical monitoring devices requiring RTCC timestamping. The wide peripheral mix makes it a strong fit for designs that need a single-chip controller with connectivity and a basic graphics engine. Designers should plan oscillator and decoupling layout carefully: the 50 MHz operation requires a stable crystal or external clock, and the QFN-64 ground pad must be soldered to a continuous ground pour for thermal dissipation and EMI suppression. Use MPLAB X IDE with XC32 compiler and configure PPS before assigning peripheral functions to physical pins. This page synthesizes distributor stock, pricing, drop-in replacement options, and engineering design notes not consolidated on the manufacturer datasheet - giving procurement and design engineers a single source for evaluation and BOM validation.

USD $4,78 En stock
PIC32MX570F512HT-I/PT - 32-bit 40MHz 512KB Flash MCU | Microchip
PIC32MX570F512HT-I/PT

PIC32MX570F512HT-I/PT - 32-bit 40MHz 512KB Flash MCU | Microchip

The Microchip Technology PIC32MX570F512HT-I/PT is a 32-bit MIPS32 M4K PIC microcontroller IC operating at up to 40 MHz, integrating 512 KB of flash and 64 KB of SRAM in a 64-pin TQFP (PT) 10x10 mm package, tape and reel packaged. According to Microchip datasheet DS60001357, the device targets the PIC32MX5xx/6xx/7xx family and offers USB 2.0 full-speed, CAN, two I2S, four SPI, PMP, and CTMU peripherals. This 'T' suffix variant ships on tape and reel for high-volume assembly. A 32-bit microcontroller (MCU) is an integrated circuit that combines a 32-bit CPU core, flash program memory, SRAM data memory, and configurable peripherals on a single die, sitting above 8/16-bit MCUs in processing capability while below microprocessors in system cost. The PIC32MX family belongs to the broader category of embedded microcontrollers, which in turn are part of the power management and digital IC ecosystem used in industrial, consumer, and IoT products. Within that taxonomy, PIC32MX570 devices are positioned for USB-connected and graphics-capable embedded designs. Key features include 83 DMIPS core performance, peripheral pin select (PPS) for flexible I/O mapping, parallel master port (PMP) with dual buffers for graphics, two I2S and four SPI modules for codec and serial communications, an integrated CTMU for capacitive touch, and a real-time clock/calendar (RTCC). The 64-pin TQFP package provides 5V-tolerant I/O on most pins and supports industrial temperature grades from -40C to +85C. Technically, the PIC32MX570F512HT-I/PT uses a 5-stage pipeline M4K core with single-cycle multiply and hardware divide, supported by a prefetch cache that boosts flash throughput. The 40 MHz version (the -I grade) operates at 3.3V and targets cost-sensitive general-purpose embedded designs, while the 50 MHz -50I grade in the same family offers higher throughput. PPS remapping means peripherals can be assigned to most digital I/O pins, simplifying PCB routing. Typical applications include industrial control panels, USB peripherals (HID, CDC, mass storage), embedded audio I2S bridges, CAN node interfaces, low-cost graphics displays, and capacitive touch human-machine interfaces. The integrated USB and CAN make it well-suited for industrial automation, point-of-sale terminals, and home appliances. When designing with this part, ensure the JTAG/ICD programming header follows Microchip's recommended 4-wire or 2-wire layout and that the USB D+/D- lines include proper 90-ohm differential routing. Pin-compatibility with PIC32MX570F512H-I/PT in the same TQFP-64 footprint enables direct placement on existing boards. This page synthesizes distributor pricing, drop-in alternatives from the same PIC32MX5xx family, and practical design notes not found in the manufacturer datasheet, sourced from Microchip product page DS60001357 and DigiKey catalog data as of 2026-10-03.

USD $5,42 En stock
PIC32MX570F512HT-V/MR - 32-Bit MCU, 512KB Flash, USB, CAN, 64-QFN | Microchip
PIC32MX570F512HT-V/MR

PIC32MX570F512HT-V/MR - 32-Bit MCU, 512KB Flash, USB, CAN, 64-QFN | Microchip

The Microchip Technology PIC32MX570F512HT-V/MR is a 32-bit microcontroller based on the MIPS32® M4K® core running at up to 50 MHz / 83 DMIPS, integrating 512 KB of Flash and 64 KB of SRAM in a 64-pin QFN (MR) 9x9 mm package. It operates from a 2.3 V to 3.6 V supply across the -40 °C to +105 °C industrial temperature range and delivers 83 DMIPS with single-cycle MAC 32x16 and two-cycle 32x32 multiply support, plus MIPS16e® code compression for up to 40 % smaller code size. What is a 32-bit PIC microcontroller? A PIC32MX-series MCU is a 32-bit flash microcontroller in Microchip's PIC32 family that combines a MIPS M4K core with rich digital peripherals, multiple analog modules (10-bit ADC, comparators, CTMU), and connectivity blocks (USB 2.0 Full-Speed, CAN 2.0B). It sits within the broader taxonomy of: PIC32MX5xx family -> PIC32MX family -> PIC32 32-bit MCU family -> microcontroller -> embedded processor -> semiconductor. This family targets mid-range connected-embedded designs that need more performance than PIC16/PIC24 parts but not the complexity of Cortex-M4 devices. Key features of the PIC32MX570F512HT-V/MR include: two I²S modules and four SPI interfaces for codec and serial peripherals, Parallel Master Port (PMP) with dual buffers for graphics and external memory, Peripheral Pin Select (PPS) for flexible signal routing, three analog comparators plus a Charge Time Measurement Unit (CTMU), Real-Time Clock and Calendar (RTCC), and full-speed USB 2.0 plus a CAN 2.0B module for industrial networking. The 64-QFN (MR) package with exposed pad delivers low thermal resistance for high-MIPS continuous operation. The PIC32MX570F512H architecture pairs a 5-stage pipeline M4K core with a multi-vector interrupt controller and a peripheral bus that runs independently of the CPU, allowing DMA-style data movement between the USB, CAN, and PMP blocks while the CPU executes application logic. The 512 KB Flash is large enough for USB stacks, TCP/IP, and graphics libraries common in HMI and connected-sensor designs, while the 64 KB SRAM supports full Ethernet or USB buffers with margin for RTOS workloads. Typical applications include industrial control panels with USB-CDC / CAN connectivity, low-cost HMI with graphics on PMP-driven TFTs, USB peripherals such as barcode scanners and POS terminals, automotive body and comfort modules (within the 105 °C thermal range), and sensor-hub / data-acquisition nodes that need CTMU touch and RTCC timestamping. Designers also use the PIC32MX570F512H in audio streaming bridges via the two I²S ports. When designing with this part, take care that the VDD/AVDD rails are well decoupled (one 100 nF per pin pair plus a 4.7 µF bulk) and that the 64-QFN exposed pad is soldered to a sufficient copper pour - the MR package's thermal performance depends on it. Confirm that the chosen -V suffix (-40 °C to +105 °C) matches your product's environmental spec; the -I grade (-40 °C to +85 °C) and the 50 MHz grade part PIC32MX570F512H-50I/MR are drop-in compatible siblings. This page synthesizes distributor pricing, drop-in alternatives within the same PIC32MX5xx QFN-64 family, and practical design notes not found in the manufacturer datasheet - giving procurement and firmware engineers a one-stop reference.

USD $5,15 En stock
PIC32MX570F512HT-V/PT - 50MHz 32-bit MCU 512KB Flash TQFP-64 | Microchip
PIC32MX570F512HT-V/PT

PIC32MX570F512HT-V/PT - 50MHz 32-bit MCU 512KB Flash TQFP-64 | Microchip

The Microchip Technology PIC32MX570F512HT-V/PT is a 32-bit MIPS32 M4K microcontroller operating at up to 50 MHz/83 DMIPS, with 512 KB Flash and 64 KB SRAM in a 64-pin TQFP (PT) package with extended -40C to +105C industrial operating temperature range. It integrates two I2S modules, four SPI modules, USB 2.0 full-speed device/host/OTG, two CAN modules, three analog comparators, a charge time measurement unit (CTMU), and a real-time clock/calendar (RTCC), enabling connected embedded designs in a single chip. A microcontroller (MCU) is a programmable processor with on-chip Flash program memory, SRAM data memory, and a rich set of peripherals (I/O, timers, communication controllers, ADCs) integrated into one package. The PIC32 family sits within Microchip's 32-bit portfolio under the broader PIC microcontroller line, following the MIPS32 architecture and supporting position in the hierarchy MCU -> 32-bit microcontroller -> embedded processor -> semiconductor IC. Key differentiating features include 512 KB Flash (twice the density of mid-range PIC32MX1/2/3 parts), dedicated USB and CAN hardware blocks eliminating external transceivers in many cases, Peripheral Pin Select (PPS) for flexible signal routing, and a Parallel Master Port (PMP) with dual buffers for graphics or external memory interfaces. The CTMU enables touch sensing and capacitive measurement applications without an external analog front end. Architecturally, the PIC32MX5 family uses a 5-stage pipeline MIPS M4K core with single-cycle multiply and hardware divide, supported by a 16 KB instruction cache and prefetch buffer. This balanced pipeline delivers 1.66 DMIPS/MHz efficiency at low power, with multiple low-power sleep modes managed by the on-chip Power Management Unit (PMU). Typical applications include USB peripherals (HID, CDC, mass storage), CAN-based industrial networking nodes, audio playback with I2S DAC interfaces, graphical HMI panels using PMP-driven LCDs, and IoT edge nodes requiring both USB and CAN connectivity. The integrated USB and CAN peripherals make this device a strong fit for bridging industrial and PC connectivity in compact form factors. When designing with this MCU, carefully review the PPS mapping table because most digital peripheral signals are remappable to multiple pins, and incorrect PPS locking is a common source of bring-up issues. Allocate at least one timer for the RTCC crystal startup delay and ensure the CTMU reference current is calibrated per application notes. This page consolidates distributor pricing, drop-in same-family alternatives, and design guidance that supplements the Microchip datasheet and family reference manual for engineers evaluating the PIC32MX5 platform.

USD $5,85 En stock
PIC32MX570F512L-50I/PT - 50MHz 512KB Flash MCU | Microchip
PIC32MX570F512L-50I/PT

PIC32MX570F512L-50I/PT - 50MHz 512KB Flash MCU | Microchip

The Microchip Technology PIC32MX570F512L-50I/PT is a 32-bit MIPS32 M4K microcontroller delivering up to 50 MHz / 83 DMIPS performance with 512 KB Flash and 64 KB SRAM, housed in a 100-pin TQFP (PT) 12x12 mm package. It belongs to the PIC32MX1XX/2XX/5XX 64/100-pin family, integrates a USB 2.0 Full-Speed OTG controller, a CAN 2.0B module, four I2S/SPI modules, two I2C modules, a Parallel Master Port (PMP), and a 10-bit 1 MSPS ADC with up to 48 channels. A 32-bit microcontroller (MCU) is an embedded processor that integrates CPU, memory, and peripherals on a single die. Within the broader taxonomy, the PIC32MX570 sits in the 32-bit MCU category (above 8-bit and 16-bit MCUs), and within that family in the MIPS32 M4K architectural line. Compared with 8-bit PIC16/PIC18 devices, the PIC32MX core delivers roughly 10x the MIPS throughput while retaining Microchip's MPLAB X toolchain compatibility, easing migration for existing PIC firmware developers. The PIC32MX5xx sub-family specifically adds USB-OTG and CAN peripherals that are absent on lower-tier PIC32MX1xx/2xx parts. Key features of the PIC32MX570F512L include Peripheral Pin Select (PPS) for flexible I/O mapping, a Charge Time Measurement Unit (CTMU) for capacitive touch sensing, a 16-bit Parallel Master Port (PMP) with dual read/write buffers for graphics interfaces, two I2S modules for audio codec interfaces, and an on-chip 8 MHz internal oscillator with PLL support up to 50 MHz. The device also includes a JTAG debugger interface, five 16-bit timers/counters, five input capture and five output compare modules, and a real-time clock calendar. Architecturally, the M4K core combines single-cycle hardware multiply and a 5-stage pipeline, enabling deterministic interrupt response at 50 MHz. The 64 KB SRAM supports data buffering for USB isochronous transfers and CAN message handling simultaneously. The 512 KB Flash is organized as 256K x 16 with pre-fetch cache, accelerating instruction fetches at full clock rate. Typical applications include USB audio headsets and USB-to-CAN bridges, industrial HMI panels with graphics LCDs, capacitive touch user interfaces, embedded web servers, and USB HID peripherals. The wide peripheral mix also suits motor control prototyping and medical instrumentation front-ends. When designing with this MCU, allocate adequate decoupling capacitance near each VDD/VSS pair, ensure the 50 MHz PLL reference is within 50 ppm stability, and observe the I/O pin current limits of 15 mA source / sink when driving LEDs or relays directly. The -50I suffix denotes 50 MHz maximum clock and -40 C to +85 C industrial temperature range. This page consolidates distributor pricing, drop-in same-brand alternatives in the same 100-pin TQFP, and practical engineering design notes not found in the manufacturer datasheet alone, helping procurement and design engineers make faster decisions.

USD $5,30 En stock
PIC32MX570F512L-I/PT - 512KB Flash 40MHz 32-bit MCU | Microchip
PIC32MX570F512L-I/PT

PIC32MX570F512L-I/PT - 512KB Flash 40MHz 32-bit MCU | Microchip

The Microchip Technology PIC32MX570F512L-I/PT is a 32-bit MIPS32 M4K microcontroller running at up to 50 MHz/83 DMIPS, integrating 512 KB program Flash and 64 KB SRAM in a 100-pin TQFP (12x12 mm) package. It is specified for the industrial -40C to +85C temperature range and operates from 2.3V to 3.6V with USB 2.0 Full-Speed OTG and CAN 2.0B peripherals on-chip. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (RAM), and programmable I/O peripherals into one device. The PIC32MX570F512L sits within the broader taxonomy: MCU -> 32-bit MCU -> MIPS M4K core MCU -> PIC32MX family -> PIC32MX5xx sub-family (with USB/CAN/audio/graphics peripherals). It belongs to the power-management-aware class of MCUs intended for mixed analog/digital and connected products. The headline feature set includes two I2S and four SPI modules (for audio Codec and display peripherals), Peripheral Pin Select (PPS) for flexible signal routing, and a Parallel Master Port (PMP) with dual buffers for graphics interfaces. The device also integrates a Charge Time Measurement Unit (CTMU), a 10-bit 1 MsA, and USB 2.0 Full-Speed OTG plus a CAN 2.0B module with DeviceNet addressing support. These are packaged in a 100-pin TQFP with 81 user I/O capable of driving mixed analog and digital loads. Architecturally, the MIPS M4K core features a 5-stage pipeline with hardware multiply/divide and a shadow register set for fast interrupt response. The 512 KB Flash is single-cycle accessible with a 128-bit-wide prefetch bus, paired with a dedicated DMA controller for peripheral-to-memory transfers without CPU intervention. The 64 KB SRAM supports live update via the dual-panel Flash architecture, enabling bootloader-style firmware upgrades in the field. Typical applications include USB-connected human-interface devices, CAN-bus industrial nodes (e.g., DeviceNet gateways), audio playback products using I2S Codecs, low-cost graphical HMI panels using PMP, and connected sensor hubs that need both USB and CAN. The 100-pin TQFP and Microchip's MPLAB X tool chain allow low-HART development using the XC32 compiler and Microchip's Harmony framework. The PIC32MX570F512L is pin-compatible with the 100-pin PIC32MX1xx/2xx/5xx family, enabling PCB reuse across Flash/RAM tiers. A key design consideration is that the PIC32MX family uses a non-5V-tolerant I/O architecture on most pins (3.6V VIH max on many pins), so level shifting is required when interfacing with 5V legacy logic. The integrated 8 MHz internal RC can be used for USB start-up, simplifying BOM. This page synthesizes distributor pricing, parametric equivalents, and practical design notes not found in the manufacturer datasheet alone.

USD $4,82 En stock
PIC32MX570F512L-V/PF - 32-Bit MCU 512KB Flash 64KB RAM 100-TQFP | Microchip
PIC32MX570F512L-V/PF

PIC32MX570F512L-V/PF - 32-Bit MCU 512KB Flash 64KB RAM 100-TQFP | Microchip

The Microchip PIC32MX570F512L-V/PF is a 32-bit MIPS M4K microcontroller with 512 KB Flash and 64 KB SRAM, offered in a 100-pin TQFP package with operating speed up to 50 MHz (83 DMIPS). It integrates USB 2.0 Full-Speed OTG, CAN 2.0B with DeviceNet addressing, four I2S/SPI modules, Peripheral Pin Select (PPS), and a Parallel Master Port (PMP) with dual read/write buffers for graphics interfaces. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (RAM), and programmable peripherals into one package. The PIC32 family sits in the 32-bit MCU category alongside ARM Cortex-M parts; within that hierarchy it falls under MIPS32 architecture and is positioned as a high-performance, mixed-signal part for embedded designs that require USB, CAN, and rich connectivity. Key features include up to 50 MHz core operation delivering 83 DMIPS, 512 KB Flash with 64 KB RAM, USB 2.0 Full-Speed On-The-Go, and CAN 2.0B with DeviceNet-ready addressing. The device also offers 16-bit Parallel Master Port (PMP) for external graphics memory, Peripheral Pin Select for flexible peripheral routing, two I2S and four SPI modules for codec and serial communications, a 10-bit ADC with up to 1 Msps sampling, and an integrated RTCC and CTMU for touch and timing functions. Internally the part uses the MIPS32 M4K core with 5-stage pipeline, hardware multiply/divide, and a tightly coupled prefetch module for deterministic Flash access. PPS remaps digital peripherals to a wide range of physical pins, which simplifies PCB routing and enables late-stage design changes. The 100-pin TQFP package exposes the maximum number of peripherals and analog channels of this sub-family. Typical applications include USB audio interfaces, CAN-based industrial control nodes, HMI panels with graphics LCDs, and embedded control boards that need both USB device/host and CAN connectivity in a single chip. The combination of PMP, I2S, and CTMU also makes the part suitable for touch-screen human-machine interfaces. When designing with this device, ensure the supply rail stays within 2.3 V to 3.6 V and place decoupling close to each VDD/VSS pair; the integrated CTMU and PMP require careful grounding for low-noise touch and graphics performance. This page combines distributor pricing, verified drop-in alternatives, and practical design notes that complement the manufacturer datasheet with concrete cross-vendor comparison data.

USD $5,48 En stock
PIC32MX570F512LT-50I/GJX - 32-bit MCU 512KB Flash 50MHz TFBGA-100 | Microchip
PIC32MX570F512LT-50I/GJX

PIC32MX570F512LT-50I/GJX - 32-bit MCU 512KB Flash 50MHz TFBGA-100 | Microchip

The Microchip Technology PIC32MX570F512LT-50I/GJX is a 32-bit MIPS32 M4K microcontroller running up to 50 MHz with 83 DMIPS core performance, integrating 512 KB of Flash program memory and 64 KB of SRAM in a 100-pin TFBGA (7x7 mm) package. The device is tape-and-reel (LT suffix) and rated for the industrial temperature range of -40C to +85C. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, volatile and non-volatile memory, and a rich set of peripherals such as timers, communication controllers and ADCs. PIC32MX5xx parts sit in Microchip's PIC32 family, which uses a MIPS32 core rather than the ARM Cortex-M cores used by many peers. Within the broader taxonomy, a PIC32 MCU belongs to the class of 32-bit microcontrollers, which in turn falls under the embedded processing hierarchy: microcontroller -> embedded processor -> semiconductor -> integrated circuit. Key features include USB 2.0 full-speed On-The-Go (OTG) with integrated PHY, a CAN 2.0B controller, two I2S and four SPI modules for codec and serial peripherals, a Parallel Master Port (PMP) with dual buffers for graphics interfaces, Peripheral Pin Select (PPS) for flexible pin mapping, an RTCC with calendar mode, a CTMU for capacitive touch, three analog comparators and a 10-bit ADC with up to 16 channels. The 100-pin TFBGA footprint exposes five 16-bit timers/counters, configurable I/O, JTAG and trace ports. Architecturally the M4K core executes most instructions in one cycle and is supported by a 5-stage pipeline with hardware multiply/divide and a tightly-coupled prefetch module that masks Flash wait states. The integrated DMA controller offloads memory-to-peripheral transfers and the bus matrix allows concurrent Flash and RAM access. PPS remaps digital peripherals to almost any I/O pin, dramatically simplifying board routing. Typical applications include USB peripherals, CAN-connected industrial sensors, audio codecs with I2S, graphical user interfaces with PMP-driven TFTs, capacitive touch keypads via CTMU, and low-cost IoT bridges. The wide peripheral mix makes it a flexible general-purpose MCU for mid-volume embedded designs. Designers should review the device errata and DS60001129 (PIC32MX5xx/6xx/7xx family data sheet) before committing to the 100-pin TFBGA, which requires a 7x7 mm fan-out and careful microvia stack-up for reliable assembly. This page synthesizes verified distributor pricing, drop-in alternative recommendations and engineering-oriented design notes that go beyond the manufacturer datasheet and standard distributor listings.

USD $5,47 En stock
PIC32MX570F512LT-50I/PF - 50MHz 512KB Flash MCU | Microchip
PIC32MX570F512LT-50I/PF

PIC32MX570F512LT-50I/PF - 50MHz 512KB Flash MCU | Microchip

The Microchip Technology PIC32MX570F512LT-50I/PF is a 32-bit MIPS microcontroller from the PIC32MX5 family featuring a MIPS32 M4K core running up to 50 MHz (83 DMIPS) with 512 KB of Flash and 64 KB of SRAM in a 100-pin TQFP (14x14 mm) package. It integrates two I2S and four SPI modules for codec and serial communications, Peripheral Pin Select (PPS) for flexible pin mapping, and a Parallel Master Port (PMP) with dual read/write buffers for graphics interfaces. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory (Flash), data memory (SRAM), and a rich set of peripherals. The 32-bit class of MCUs extends 8/16-bit devices with higher computational throughput (measured in DMIPS), larger memory addressing, and richer connectivity. Within that class, the PIC32MX5 series targets applications that need multimedia interfaces (I2S for digital audio, PMP for TFT displays) alongside traditional MCU I/O, bridging cost-sensitive industrial and consumer designs. Key features include 50 MHz / 83 DMIPS MIPS32 M4K core performance, 512 KB Flash (512K x 8), 64 KB SRAM, two I2S modules for audio codecs, four SPI modules for high-speed serial peripherals, Peripheral Pin Select (PPS) for remappable digital I/O, a Parallel Master Port (PMP) with dual buffers, and an on-chip 16-bit ADC with CTMU for touch and capacitive sensing. The 'L' suffix denotes the 100-pin variant, 'T' denotes tape and reel, '50' denotes the 50 MHz speed grade, 'I' is the industrial -40C to +85C temperature range, and 'PF' is the 100-pin TQFP package. Typical applications include digital audio playback/recording devices using external I2S codecs, low-cost graphical HMI panels with PMP-driven TFT LCDs, industrial control and sensor nodes with CTMU touch sensing, USB device/host/embedded designs using the PIC32 USB stack, and general purpose embedded control with rich peripheral connectivity. The wide operating voltage range (2.3V to 3.6V) and industrial temperature grade support factory automation and outdoor equipment. When designing with this MCU, verify the power budget: VDD core current scales with clock and peripheral activity, so an LDO or switching regulator sized for the worst-case active mode is essential. Use MPLAB X IDE with the XC32 compiler for firmware development, and consult the device-specific data sheet for pin, peripheral, and electrical characteristics. This page synthesizes distributor pricing, same-family and cross-brand drop-in alternatives, and practical design notes that go beyond the manufacturer datasheet.

USD $4,61 En stock
PIC32MX570F512LT-50I/PT - 50MHz 512KB Flash MCU | Microchip
PIC32MX570F512LT-50I/PT

PIC32MX570F512LT-50I/PT - 50MHz 512KB Flash MCU | Microchip

The Microchip Technology PIC32MX570F512LT-50I/PT is a 32-bit MIPS MCU delivering up to 50 MHz / 83 DMIPS from the MIPS32 M4K core, with 512 KB Flash and 64 KB SRAM, housed in a 100-pin TQFP (12x12 mm) package. It supports 2.5V/3.3V operation and is qualified for the industrial -40C to +85C temperature range. The 'T' suffix denotes tape-and-reel packaging and the '50I' indicates 50 MHz speed grade with industrial temperature. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, Flash program memory, SRAM data memory, and a rich set of peripherals (ADC, timers, communication interfaces). The PIC32MX family uses the MIPS32 M4K core, positioning these parts in the hierarchy: MIPS32 core -> 32-bit MCU -> microcontroller -> embedded controller -> semiconductor. This taxonomy matters because software stacks, compiler toolchains (MPLAB XC32), and middleware are tied to the core architecture. Key features include two I2S and four SPI modules for audio codec and serial communications, Peripheral Pin Select (PPS) for flexible I/O mapping, a Parallel Master Port (PMP) with dual buffers for graphics interfaces, and a CTMU (Charge Time Measurement Unit) for capacitive touch and time-of-flight measurements. USB 2.0 full-speed OTG and CAN 2.0b are integrated, eliminating external transceivers for many designs. Architecturally, the PIC32MX570F512L family combines a Harvard-cache architecture with 5-stage pipeline, achieving 1.53 DMIPS/MHz efficiency. The device includes a 10-bit 1 Msps ADC with up to 28 channels, five 16-bit timers/counters, and DMA for low-CPU-overhead peripheral transfers. JTAG and 2-wire debug interfaces support MPLAB ICD tools for in-circuit programming and debugging. Typical applications include industrial control and HMI panels using PMP graphics, USB peripherals such as audio interfaces and human-interface devices, CAN-connected automotive and building-automation nodes, audio processing with I2S codecs, and capacitive touch user interfaces using the CTMU. Designers choose this part when they need a balance of USB/CAN connectivity, ample Flash for GUI stacks, and proven MPLAB ecosystem support. When designing, plan the I/O map carefully using PPS to remap peripheral functions to physical pins, and reserve an external 8 MHz crystal plus PLL configuration to reach 50 MHz. Use the Explorer 16/32 development board PIM for early prototyping - the 100-pin PIM form factor accelerates bring-up. This page synthesizes distributor pricing (as of 2026-10-03), drop-in alternatives from the same PIC32MX family, and practical design notes not consolidated in the manufacturer datasheet alone.

USD $6,10 En stock
PIC32MX570F512LT-I/GJX - 50MHz 32-bit MCU 512KB Flash TFBGA-100
PIC32MX570F512LT-I/GJX

PIC32MX570F512LT-I/GJX - 50MHz 32-bit MCU 512KB Flash TFBGA-100

The Microchip Technology PIC32MX570F512LT-I/GJX is a 32-bit MIPS32 M4K microcontroller running at up to 50 MHz/83 DMIPS, integrating 512 KB of Flash program memory and 64 KB of SRAM in a compact 100-pin TFBGA (7x7 mm) package. Per the Microchip datasheet, this member of the PIC32MX1XX/2XX/5XX 64/100-pin family combines a high-performance core with USB 2.0 Full-Speed OTG, CAN 2.0B with DeviceNet addressing, two I2S and four SPI modules, a Parallel Master Port (PMP) with dual buffers, and Peripheral Pin Select (PPS) for flexible signal routing. The 'L' suffix indicates the industrial -40C to +85C temperature range and 100-pin package option, while 'T' denotes tape-and-reel packaging. A 32-bit microcontroller (MCU) is an integrated circuit that combines a processor core, program memory (Flash), data memory (SRAM), and a rich set of on-chip peripherals such as timers, communication controllers, and analog blocks. In the system hierarchy, an MCU sits above discrete logic and below a system-on-chip (SoC); the PIC32MX570F512L family targets cost-sensitive embedded applications where MIPS architecture, deterministic interrupt response, and Microchip's MPLAB Harmony toolchain deliver faster development cycles than ARM Cortex-M parts at similar Flash densities. Key differentiating features include the 50 MHz/83 DMIPS M4K core, integrated Full-Speed USB OTG and CAN 2.0B, an on-chip 16-channel 10-bit ADC with up to 1 Msps sampling, three analog comparators plus a CTMU (Charge Time Measurement Unit) for capacitive touch sensing, and a real-time clock/calendar (RTCC). The 100-pin TFBGA (7x7) footprint provides ample I/O for parallel graphics and PMP-driven LCD interfaces while keeping PCB area minimal. Architecturally, the part uses a 5-stage pipelined M4K core with hardware multiply/divide, dual I-cache/S-cache, a flexible DMA controller, and Microchip's PPS - allowing most digital peripherals to be remapped to a wide choice of physical pins, which simplifies PCB layout and BOM reuse across family members. Typical applications include industrial USB peripherals, CAN-based automotive body controllers, audio HMI with I2S codecs, capacitive-touch human-machine interfaces, low-cost graphics terminals, and embedded data-acquisition front-ends. The combination of USB device/host/OTG plus CAN in a single 100-pin BGA makes this MCU particularly attractive for industrial-control gateways. A key design trade-off is the TFBGA-7x7 package: it minimizes PCB area but requires careful via-in-pad design and X-ray inspection during assembly. Engineers should budget for an additional PCB layer and reflow profile tuning to obtain reliable BGA solder joints in production. This page synthesizes distributor pricing, drop-in alternatives, and design notes not found in the manufacturer datasheet, giving buyers and engineers a single authoritative source for procurement and design decisions.

USD $4,78 En stock
PIC32MX570F512LT-V/GJX - 50MHz 32-bit MCU, 512KB Flash, TFBGA-100 | Microchip
PIC32MX570F512LT-V/GJX

PIC32MX570F512LT-V/GJX - 50MHz 32-bit MCU, 512KB Flash, TFBGA-100 | Microchip

The Microchip PIC32MX570F512LT-V/GJX is a 32-bit MIPS32 M4K microcontroller running at up to 50 MHz (83 DMIPS), integrating 512 KB of Flash program memory and 64 KB of SRAM in a 100-pin TFBGA (7x7 mm) package. It is rated for the automotive V temperature grade (-40°C to +105°C) and supports 2.5 V / 3.3 V operation. The device is part of the PIC32MX5xx family and includes USB 2.0 Full-Speed, CAN 2.0B, four SPI modules, two I²S interfaces, four UART modules, five I²C modules, and a 16-channel 10-bit ADC at 1 Msps. A 32-bit microcontroller (MCU) is a single-chip processor that integrates a CPU core, program and data memory, and a rich set of peripherals on a single die, forming the compute backbone of embedded systems. The PIC32MX570 belongs to the broader taxonomy: 32-bit MCU -> embedded microcontroller -> microprocessor IC -> integrated circuit -> semiconductor. It uses a RISC load-store architecture and is typically paired with a real-time operating system (RTCC, FreeRTOS, Micrium) or runs bare-metal firmware in C. Key features of the PIC32MX570F512LT include Peripheral Pin Select (PPS), a Parallel Master Port (PMP) for graphics interfaces, a Charge Time Measurement Unit (CTMU) for capacitive touch and precise time measurement, three analog comparators, and a real-time clock/calendar (RTCC). The PIC32MX5xx family is optimized for cost-sensitive connectivity and HMI designs, combining a high-performance MIPS core with industrial-grade connectivity in a small BGA footprint that suits compact layouts. The MIPS32 M4K core implements a five-stage pipeline, hardware multiply/divide, and a single-cycle shadow register set for fast interrupt response, which together with the 83 DMIPS performance make it suitable for protocol stacks (USB, CAN, TCP/IP) running concurrently with application code. The 512 KB Flash supports self-programming via ICSP, and the 64 KB RAM accommodates large TCP/IP or USB buffers. Integrated DMA on the USB, CAN, and SPI/I²S peripherals offloads the CPU and enables deterministic throughput for streaming data such as audio or sensor telemetry. Typical applications for PIC32MX570F512LT-V/GJX include USB peripherals (HID, CDC, MSD, audio class), CAN-connected automotive body and gateway ECUs, industrial HMI with PMP-driven TFT displays, IoT edge nodes, and audio streaming devices using the I²S ports with an external CODEC. The combination of 50 MHz, USB, CAN, and 512 KB Flash targets cost-optimized designs that previously required a separate MCU plus external controller ICs. When designing with this part, ensure the BGA PCB land pattern follows IPC-7351 recommendations and that the exposed die-attach paddle (if applicable to the TFBGA substrate) is thermally connected for heat spreading. Firmware development is supported by MPLAB X IDE, MPLAB Harmony, and the XC32 compiler; programmers include PICkit 4, ICD 4, and MPLAB Snap. Engineers migrating from PIC32MX4 to PIC32MX5 benefit from binary-compatible peripherals while gaining USB and CAN.

USD $5,92 En stock
PIC32MX570F512LT-V/PT - 32-bit MCU, 512KB Flash, USB/CAN, 100-TQFP
PIC32MX570F512LT-V/PT

PIC32MX570F512LT-V/PT - 32-bit MCU, 512KB Flash, USB/CAN, 100-TQFP

The Microchip Technology PIC32MX570F512LT-V/PT is a 32-bit MIPS32 M4K PIC microcontroller with 512KB Flash, 64KB RAM, USB 2.0 Full-Speed, CAN 2.0B, and three analog comparators in a 100-pin TQFP package rated for the automotive -40C to +105C temperature range. It is part of the AEC-Q100 qualified PIC32MX5xx family engineered for graphics, audio, and connected-embedded designs. A PIC32MX microcontroller is a 32-bit MIPS-based MCU within the broader PIC microcontroller family, bridging 8/16-bit PIC legacy code to 32-bit application processors. It belongs to the power-management-aware embedded MCU category, sitting between 8-bit MCUs and Cortex-M application processors, and integrates Flash, SRAM, and peripherals into a single chip optimized for deterministic real-time control plus moderate connectivity. Key features include 50 MHz/83 DMIPS core performance, two I2S audio ports for codec interfacing, four SPI modules, I2C, five 16-bit timers, a 10-bit 1 Msps ADC with up to 48 channels, a Parallel Master Port (PMP) with dual buffers for graphics, Peripheral Pin Select (PPS) for flexible pin mapping, and a Charge Time Measurement Unit (CTMU) for capacitive touch sensing. The USB 2.0 Full-Speed device/host/OTG controller and CAN 2.0B module enable industrial and automotive networking. The PIC32MX570F512L uses a 5-stage MIPS M4K pipeline with hardware multiply/divide and a single-cycle Flash prefetch, delivering 83 DMIPS at 50 MHz while drawing roughly 30 mA active. The 100-TQFP (12x12 mm) package provides 78 user I/O through PPS remapping, allowing peripheral-to-pin reassignment at runtime. The integrated 8 MHz FRC with PLL supports operation down to 2.3V. Typical applications include automotive infotainment HMI, USB peripherals, CAN-based industrial control, audio playback with I2S codecs, and capacitive touch HMI panels. The AEC-Q100 grade -V (-40C to +105C) plus CTMU makes it well-suited for harsh-environment HMI where commercial-grade parts fail. When designing, allocate I/O early because PPS remaps only a subset of pins; verify the specific peripheral-to-pin mapping for each design. Place the 0.1 uF decoupling network close to every VDDCORE/VSS pair, and follow the Microchip reference layout for the USB differential pair to meet USB 2.0 signal-integrity compliance. This page synthesizes AEC-Q100 cross-reference data, distributor pricing snapshots, and 100-TQFP drop-in alternatives for PIC32MX570F512LT-V/PT - insights that streamline sourcing for automotive HMI and industrial-control designs.

USD $4,82 En stock
PIC32MX575F256H-80I/MR - 32-bit MCU 256KB Flash 80MHz 64-VQFN | Microchip
PIC32MX575F256H-80I/MR

PIC32MX575F256H-80I/MR - 32-bit MCU 256KB Flash 80MHz 64-VQFN | Microchip

The Microchip Technology PIC32MX575F256H-80I/MR is a 32-bit microcontroller built on the MIPS32 M4K core, running up to 80 MHz (105 DMIPS) with 256 KB of program Flash and 64 KB of SRAM, housed in a 64-pin VQFN (MR) 9x9 mm package with exposed thermal pad. It integrates USB 2.0 On-The-Go with on-chip PHY, a CAN 2.0B module, 16-bit Parallel Master Port, 10-bit ADC, and dedicated DMA for USB OTG, targeting embedded designs that need rich connectivity in a single chip. The -80I suffix denotes the 80 MHz speed grade and the -40C to +85C industrial temperature range, while the /MR suffix marks the 64-VQFN 9x9 mm lead-free package. A 32-bit PIC32 microcontroller is a member of the MIPS-based MCU family that occupies the high-performance tier of Microchip's product hierarchy: PIC10/12/16 -> PIC24/dsPIC -> PIC32 -> Cortex-M class (competing). PIC32MX bridges 8/16-bit PIC simplicity with 32-bit throughput, integrating DSP-friendly peripherals, RTOS-friendly memory, and on-board USB/CAN. Positioned under PIC32MZ and PIC32MM as a mainstream connected MCU, PIC32MX575F256H serves graphics-interface, USB-device, and CAN-connected industrial designs where cost-per-feature matters. Key features include 53 digital I/O pins, a 16-channel 10-bit ADC, five 16-bit timers/capture inputs, two UART, two SPI, two I2C, a Parallel Master Port for graphics displays, USB OTG with integrated PHY (eliminating external transceiver), and CAN 2.0B with 1024-message buffers. The device supports MIPS16e instruction compression for up to 40% code-size reduction, a 5-stage Harvard pipeline, and 4 dedicated DMA channels for USB OTG. Programmable pull-ups, slew-rate control, and open-drain outputs simplify mixed-voltage interfacing, while the 80 MHz core and 105 DMIPS throughput handle USB stacks, graphics rendering, and CAN traffic simultaneously. Typical applications include USB human-interface devices, CAN-connected industrial sensors, low-cost graphics display controllers using the PMP, point-of-sale terminals, and connected medical instruments. The 256 KB Flash accommodates full USB stacks plus application code; 64 KB RAM supports large USB buffers and graphics framebuffers. Designers pair this MCU with PHY-less USB lines (D+/D- direct), CAN transceivers like MCP2551, and small TFT displays driven through PMP. USB OTG capability also enables device/host/On-The-Go role switching without an external PHY. When designing with this device, ensure 3.3V supply (2.5-3.6V tolerant), bulk decoupling on every VDD/VSS pair, and a 12 MHz crystal reference for the 80 MHz system clock. The exposed pad on the VQFN-64 must be soldered to a thermal/ground pour. Programming uses ICSP over PGECx/PGEDx pins or MPLAB ICD via the same pads; MPLAB X IDE and Harmony framework are the official toolchains. This page synthesizes distributor pricing, drop-in PIC32MX5xx alternatives, USB/CAN peripheral notes, and a 64-VQFN pinout not consolidated on any single distributor page.

USD $5,27 En stock
PIC32MX575F256H-80I/PT - 80MHz 32-bit MCU 256KB Flash | Microchip
PIC32MX575F256H-80I/PT

PIC32MX575F256H-80I/PT - 80MHz 32-bit MCU 256KB Flash | Microchip

The Microchip Technology PIC32MX575F256H-80I/PT is a 32-bit MIPS32 M4K RISC microcontroller delivering 80 MHz performance with 256 KB Flash and 64 KB SRAM in a 64-pin TQFP (PT) 10x10 mm package. It integrates USB 2.0 full-speed, CAN 2.0b, 10-bit ADC, and a parallel graphics interface for human-machine interface designs. A PIC32 microcontroller belongs to the 32-bit MCU (microcontroller unit) family, which sits in the embedded processing hierarchy above 8-bit and 16-bit microcontrollers. Within Microchip's portfolio, PIC32MX devices target general-purpose 32-bit applications using the MIPS32 instruction set, sitting above PIC16 and PIC24/dsPIC families and below the higher-performance PIC32MZ family. The 32-bit core enables more complex software stacks, larger memory addressing, and richer peripheral integration than legacy 8/16-bit MCUs, while keeping deterministic real-time behavior. Key features include 256 KB Flash, 64 KB SRAM, USB 2.0 full-speed OTG, CAN 2.0b, up to eight 16-bit timers, a 10-bit 1 Msps ADC with up to 16 channels, I2S for audio, and a PMP parallel master port for graphics. The 64-pin TQFP 10x10 mm package offers manageable PCB area with 0.5 mm pitch for hand-prototyping or low-density layouts, and the -80I industrial temperature grade supports -40C to +85C operation. The M4K core uses a 5-stage pipeline with single-cycle multiply, hardware divide, and a configurable prefetch/cache controller that mitigates Flash wait-state penalties at 80 MHz. The 16 KB instruction cache and prefetch module accelerate tight loops in DSP-style filtering and motor-control code, while the bus matrix keeps USB, CAN, DMA, and the PMP concurrent. Typical applications include USB peripherals, industrial CAN nodes, low-cost graphics HMI panels, audio playback with I2S DACs, and bridges between legacy industrial sensors and modern USB hosts. It is also used in entry-level embedded web servers and POS terminals. When designing, validate that the 3.3V rail meets the 2.3-3.6V supply window, keep oscillator traces short, and reserve a robust decoupling network around the VDD/VSS pairs. Use Microchip MPLAB Harmony or MCC for peripheral configuration to avoid register-level misconfiguration. This page synthesizes distributor pricing, drop-in alternatives in the same TQFP-64 footprint, and practical design notes not aggregated on the manufacturer datasheet alone.

USD $7,46 En stock
PIC32MX575F256HT-80I/PT - 80MHz 32-bit MCU 256KB Flash USB/CAN | Microchip
PIC32MX575F256HT-80I/PT

PIC32MX575F256HT-80I/PT - 80MHz 32-bit MCU 256KB Flash USB/CAN | Microchip

The Microchip Technology PIC32MX575F256HT-80I/PT is a 32-bit MIPS32 M4K PIC microcontroller operating at 80 MHz with 256 KB Flash and 64 KB SRAM in a 64-pin TQFP (10x10 mm) package. It integrates a full-speed USB 2.0 device/host/OTG controller, a CAN 2.0B module, 10-bit ADC with 16 channels, and a rich set of timers and serial peripherals. This -I variant is rated for the industrial -40C to +85C operating range. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (RAM), and programmable I/O peripherals onto one die. The PIC32 family extends the legacy PIC architecture to a 32-bit MIPS32 M4K core, delivering MIPS-class performance (~1.5 DMIPS/MHz) while preserving the familiar PIC toolchain (MPLAB X IDE, Harmony, XC32 compiler). Within the broader taxonomy, a PIC32 MCU is a microcontroller -> embedded processor -> semiconductor -> integrated circuit. Key features include 256 KB Flash with self-programming support, 64 KB SRAM, 53 digital I/O pins, 5 timers, 6 SPI/I2S, 6 UART, 3 I2C, a parallel master port (PMP) for graphics, and DMA for low-CPU-overhead data movement. The integrated USB 2.0 full-speed transceiver, CAN 2.0B controller, and 10-bit 1 MSPS ADC simplify designs that previously required multiple companion chips. Architecturally, the device uses a 5-stage pipeline MIPS32 M4K core, a multi-vector interrupt controller, and a peripheral bus that supports direct memory access between peripherals and SRAM. This combination allows deterministic interrupt latency even with USB and CAN traffic active - a key requirement for industrial fieldbus nodes and consumer USB peripherals. The F variant suffix denotes the 256 KB Flash density tier within the PIC32MX5xx/6xx/7xx family. Typical applications include USB peripherals (HID, CDC, MSD, audio class), CAN-based industrial nodes, graphics HMI with the PMP bus, sensor aggregation, and consumer audio devices. The wide peripheral set also makes the device suitable for retrofitting older 16-bit PIC24/PIC32 designs where USB or CAN is needed without going to a Cortex-M part. When designing with this device, plan for a 3.3V single supply (2.3V to 3.6V tolerant) and provision decoupling per the family datasheet. The two ICSP/ICD pins (PGECx, PGEDx) must be routed with short traces and pull-ups to enable in-circuit programming and MPLAB debugger operation. This page synthesizes distributor pricing, drop-in same-package alternatives, and design notes not found in a single manufacturer datasheet, giving procurement and firmware engineers a single-source reference.

USD $4,89 En stock
PIC32MX575F256HT-80V/MR - 80MHz 32-bit MCU 256KB Flash | Microchip
PIC32MX575F256HT-80V/MR

PIC32MX575F256HT-80V/MR - 80MHz 32-bit MCU 256KB Flash | Microchip

The Microchip PIC32MX575F256HT-80V/MR is a 32-bit MIPS M4K microcontroller running at 80 MHz with 256 KB of Flash program memory and 64 KB of SRAM, housed in a 64-pin VQFN (9x9 mm) package. It integrates USB-OTG, a 10-bit ADC, and a CAN 2.0B controller, making it a high-integration option for embedded applications requiring both connectivity and analog conversion. The device is part of the PIC32MX5xx family targeting industrial and consumer designs. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), data memory (RAM), and a range of integrated peripherals such as timers, ADCs, communication interfaces, and GPIO. The PIC32MX5xx line uses the MIPS32 M4K 32-bit core, providing significantly higher compute throughput than 8-bit or 16-bit MCUs while retaining Microchip's PIC ecosystem (MPLAB X IDE, Harmony framework, PICkit programmers). Within the broader taxonomy, the PIC32MX sits in the hierarchy MCU -> 32-bit MCU -> MIPS-based MCU -> Microchip PIC32MX family. Key features of this variant include 256 KB Flash, 64 KB SRAM, 80 MHz core clock, USB-OTG full-speed, CAN 2.0B active, 16-channel 10-bit ADC, five 16-bit timers, and four UART/SPI/I2C modules. The -80V suffix denotes the 2.3-3.6 V VDD industrial-grade operating range with V temperature grade, while the HT suffix indicates tape-and-reel packaging for the VQFN-64. Typical applications include USB peripherals, CAN-based industrial nodes, embedded control with analog sensing, and graphical user interfaces. The integrated USB-OTG and CAN make this part well-suited for connected industrial nodes and USB device classes such as CDC, HID, and MSD. When designing with this MCU, allocate adequate PCB area for the 9x9 mm VQFN thermal pad (mandatory for power dissipation), follow Microchip's decoupling guidelines (100 nF + bulk on VDD), and use the MPLAB Harmony configurator to avoid register-level configuration errors. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $4,78 En stock
PIC32MX575F256L-80I/BG - 80MHz 256KB Flash MCU | Microchip
PIC32MX575F256L-80I/BG

PIC32MX575F256L-80I/BG - 80MHz 256KB Flash MCU | Microchip

The Microchip PIC32MX575F256L-80I/BG is a 32-bit MIPS32 M4K PIC microcontroller operating at up to 80 MHz with 256 KB Flash and 64 KB SRAM, housed in a 121-pin TFBGA (10x10 mm, 0.8 mm pitch) package. A PIC32MX microcontroller is a high-performance 32-bit Flash MCU family from Microchip built on the MIPS32 M4K core, designed for embedded applications requiring USB, CAN, and Ethernet connectivity. The PIC32MX5xx/6xx/7xx sub-family sits between the lower-pin-count PIC32MX1/2/3/4/5 series and the higher-end PIC32MX7xx graphics-enabled parts, targeting connected-embedded designs that need rich peripherals and moderate code/data density. Architecturally, the PIC32MX570/575/675/795 line bridges 8-bit PIC migration paths and full Linux-capable processors. Key features include 256 KB Flash program memory, 64 KB SRAM, full-speed USB 2.0 device/host/OTG, one CAN 2.0B controller, 10/100 Mbps Ethernet MAC, up to 83 general-purpose I/O pins, five 16-bit timers/counters, sixteen 10-bit ADC channels at 1 Msps, and two analog comparators. The 121-ball TFBGA package provides high pin density at 0.8 mm pitch with a compact 10x10 mm footprint for space-constrained designs. Industrial temperature range (-40C to +85C) is supported. The PIC32MX575F256L uses the MIPS32 M4K core with 5-stage pipeline, single-cycle multiply, hardware multiply-accumulate, and an 8-deep prefetch cache. Peripheral bus and instruction RAM are tightly coupled to allow deterministic interrupt response, while the DMA controller with eight channels offloads data movement between peripherals and memory for streaming USB, CAN, and Ethernet traffic. Typical applications include USB peripherals, CAN-based industrial nodes, Ethernet-connected embedded devices, industrial control and HMI, point-of-sale terminals, and medical instrumentation. The combination of full-speed USB, CAN, and 10/100 Ethernet makes the PIC32MX575F256L well suited to multi-protocol gateway designs. When designing, plan for 2.5V/3.3V core operation, follow Microchip's TFBGA PCB layout and decoupling guidelines for high-pin-count BGA packages, and allocate sufficient code space for the TCP/IP stack (e.g., Microchip Harmony) when Ethernet is used. The pre-fetch cache must be enabled for code in flash to achieve 80 MHz performance. This page synthesizes distributor pricing from DigiKey, Mouser, LCSC and Newark, drop-in same-package alternatives drawn from the same PIC32MX5xx family, and practical design notes not found in the manufacturer datasheet.

USD $6,12 En stock
PIC32MX575F256L-80V/BG - 80MHz 32-bit MCU 256KB Flash | Microchip
PIC32MX575F256L-80V/BG

PIC32MX575F256L-80V/BG - 80MHz 32-bit MCU 256KB Flash | Microchip

The Microchip PIC32MX575F256L-80V/BG is a 32-bit MIPS M4K microcontroller operating at 80 MHz with 256 KB of Flash and 64 KB of SRAM, integrated USB-OTG, CAN, and 10-bit ADC peripherals in a 121-ball TFBGA (10x10 mm) package. Designed for embedded applications that demand high-performance compute and connectivity, it combines deterministic interrupt latency with rich peripheral integration including USB-OTG, CAN 2.0B, I2C, SPI, and UART interfaces. A 32-bit microcontroller (MCU) is an integrated circuit containing a CPU core, program memory, data memory, and multiple peripheral interfaces on a single die. Within the embedded hierarchy, an MCU sits below a microprocessor (MPU) in scope - the MCU integrates memory and peripherals, whereas an MPU requires external components. The PIC32MX family belongs to Microchip's MIPS-based 32-bit MCU portfolio, engineered as a high-performance upgrade path for designers using PIC24/dsPIC devices who need additional throughput and full-speed USB connectivity. The PIC32MX575F256L-80V/BG executes most instructions in a single cycle due to its 5-stage pipeline Harvard architecture, achieving 1.56 DMIPS/MHz. On-chip memory includes 256 KB Flash with pre-fetch cache and 64 KB SRAM, providing sufficient headroom for protocol stacks such as USB, TCP/IP, and CAN. The integrated 10-bit ADC with up to 16 channels supports conversion rates up to 1 Msps, while the parallel master port enables connection to external graphics or memory devices without glue logic. Typical applications include industrial automation controllers with USB diagnostics, automotive body and comfort modules requiring CAN connectivity, USB-enabled medical devices such as blood-pressure monitors, and embedded HMI designs that need both USB and CAN for system integration. Its wide operating temperature range and dual communication interfaces make it especially useful where fieldbus and PC-side enumeration must coexist on the same node. When designing with this device, allocate at least one decoupling capacitor per power pin pair (0.1 uF X7R ceramic) within 3 mm of the supply balls. For USB-OTG designs, the 90-ohm differential pair must be routed as a matched-length, impedance-controlled pair with a continuous reference ground plane. The -80V speed grade specifies the 80 MHz industrial temperature range (-40C to +105C); the -80I variant offers the wider -40C to +125C grade for harsher environments. This page consolidates distributor pricing, drop-in same-package alternatives from the PIC32MX5 family, application notes for USB and CAN, and PCB layout guidance not typically compiled in the manufacturer datasheet. Engineers can compare same-footprint parts side-by-side and select a variant that matches the required temperature grade without redesigning the PCB.

USD $5,07 En stock