Microcontroladores

PIC32MZ1024EFH144T-I/PL

PIC32MZ1024EFH144T-I/PL - 200MHz 32-bit MCU 1MB Flash LQFP-144

The Microchip PIC32MZ1024EFH144T-I/PL is a high-performance 32-bit MIPS M-Class microcontroller running up to 200 MHz, integrating 1 MB of Flash and 512 KB of SRAM in a 144-pin LQFP (20x20 mm) package. The device targets connectivity-intensive applications across industrial, IoT, graphics (HMI), and motor control segments, combining Ethernet, USB, CAN, and high-resolution analog peripherals on a single die. A 32-bit MCU (microcontroller unit) is a single-chip computer that integrates a 32-bit processor core, program and data memory, and a rich set of peripherals into one package. Within the broader taxonomy, this PIC32MZ EF device sits in the hierarchy: microcontroller -> 32-bit MCU -> MIPS M-Class MCU -> PIC32MZ EF family -> embedded connectivity MCU -> semiconductor. This positioning places it between 8/16-bit legacy MCUs used for simple control and higher-end Cortex-M7 application processors used for advanced GUI and machine-learning workloads, making it well-suited for mid-range HMI, gateway, and industrial-automation designs. Key features include 1 MB (1024 KB) of Flash, 512 KB of SRAM, a 12-bit ADC with up to 2 MSPS conversion rate, six UART, four SPI, four I2C, two CAN, USB 2.0 high-speed OTG, 10/100 Ethernet MAC, and a 120-pin (GPIO) count. The integrated FPU (floating-point unit) and DSP enhancements accelerate signal-processing tasks, while the dual-bank Flash and live-update capability support firmware-over-the-air (FOTA) upgrades common in IoT products. The PIC32MZ EF architecture uses the MIPS M5150/M6240 core family, paired with a multi-channel DMA controller and a dedicated graphics controller for TFT/HMI panels. A separate crypto engine (when present, on EFH variant) accelerates AES, 3DES, SHA, and RNG primitives. The high-speed USB 2.0 OTG and 10/100 Ethernet MAC allow it to function as a connected-embedded host bridging sensors to the cloud. Typical applications include industrial IoT gateways, automotive telematics and body controllers, and the device also fits smart energy metering where its 12-bit ADC at 2 MSPS and motor-control PWMs handle multiple sensor inputs simultaneously. When laying out the PCB, ensure a 4-layer stackup with a continuous ground plane directly beneath the LQFP-144 to keep digital return paths short and to minimize EMI. Decouple VDD/VBATSS with 100 nF ceramic capacitors placed within 5 mm of every supply pin, and route the 12 MHz crystal traces as short, symmetric differential pairs with a guard ring. This page synthesizes distributor pricing, drop-in LQFP-144 alternatives from the same Microchip PIC32MZ EF family, and practical design notes not found in the manufacturer datasheet alone.

USD $7,42 En stock

PIC32MZ1024EFK064-E/MR

PIC32MZ1024EFK064-E/MR - 200MHz 1MB Flash MCU QFN-64 | Microchip

The Microchip Technology PIC32MZ1024EFK064-E/MR is a high-performance 32-bit MIPS microcontroller from the PIC32MZ EF family, featuring a MIPS32 M-Class core with FPU running at 200 MHz, 1 MB of Flash, and 256 KB of SRAM in a 64-pin QFN (9x9 mm) package. The "-E" suffix denotes the extended industrial temperature grade of -40C to +125C, while "/MR" identifies the 64-QFN (9x9) package with exposed pad. According to the Microchip datasheet (DS60001320), this device integrates IEEE 754-compliant floating-point hardware, four 64-bit accumulators, single-cycle MAC, and DSP-enhanced saturating fractional operations. A 32-bit microcontroller (MCU) is an integrated circuit combining a high-performance processor core, program memory, data memory, and programmable peripherals on a single die. The PIC32MZ EF family extends this architecture with the MIPS Warrior M-class core, placing it in the broader hierarchy of 32-bit MCUs alongside ARM Cortex-M3/M4 and higher. The EF variant adds FPU and DSP extensions for connectivity, graphics, and motor-control workloads, sitting between the PIC32MX (lower performance, no FPU) and the PIC32MZ W1 (wireless-enabled) families. Key features of the PIC32MZ1024EFK064-E/MR include a 12-channel DMA controller, integrated crypto accelerator (AES, 3DES, SHA, MD5, HMAC), 200 MHz / 330 DMIPS core performance, dedicated peripheral pin select (PPS) remapping, Hi-Speed USB 2.0 with PHY, dual CAN 2.0B controllers, 10/100 Ethernet MAC, and a 12-bit 18-MSPS ADC. The integrated crypto engine enables hardware-accelerated secure boot, TLS handshake acceleration, and secure firmware update workflows for connected embedded systems. Memory protection, a true random number generator (TRNG), and secure debug lock further enhance security. Typical applications include industrial IoT gateways, automotive body and infotainment ECUs, HMI/touchscreen controllers, motor-control BLDC/PMSM drives, secure point-of-sale terminals, and Ethernet-connected sensor nodes. Its combination of high throughput, deterministic real-time interrupt handling, and integrated crypto makes it suitable for Industry 4.0 edge devices requiring TLS, secure firmware updates, and rich connectivity. When designing with the PIC32MZ1024EFK064-E/MR, the exposed thermal pad must be soldered to a sufficient copper pour to meet the 31 C/W theta-JA rating. The PPS system allows most peripherals to be reassigned to nearly any I/O pin, simplifying routing in mixed-signal layouts. Developers typically use MPLAB X IDE with the XC32 compiler and Harmony 3 framework for peripheral drivers and middleware. This page synthesizes distributor pricing, same-family drop-in variants, and practical design guidance not collected on the manufacturer datasheet alone, helping engineers select the right PIC32MZ EF derivative for their PCB and BOM constraints.

USD $6,05 En stock

PIC32MZ1024EFK064T-I/MR

PIC32MZ1024EFK064T-I/MR - 200MHz 32-bit MCU 1MB Flash 64-QFN | Microchip

The Microchip Technology PIC32MZ1024EFK064T-I/MR is a high-performance 32-bit microcontroller from the PIC32MZ Embedded Connectivity with Floating Point Unit (EF) family, integrating 1 MB of Flash, 256 KB of SRAM, and a MIPS32 M-Class core running up to 200 MHz (330 DMIPS) inside a 64-pin QFN package (9x9 mm) with an exposed thermal pad. A 32-bit microcontroller (MCU) is a programmable system-on-chip that combines a 32-bit processor core, Flash program memory, SRAM data memory, and a rich peripheral set into a single IC. The PIC32MZ EF series sits in the hierarchy of 32-bit MCUs -> MIPS Warrior M-class -> industrial MCU -> embedded microcontroller, and PIC parts specifically target industrial, automotive, IoT, graphics/HMI, and motor-control applications. The EF sub-family adds a hardware IEEE 754-compliant floating-point unit, four 64-bit DSP accumulators, single-cycle MAC, and a hardware crypto engine, making it a member of the secure-MCU segment. Key features include 200 MHz core frequency delivering up to 330 DMIPS, 1 MB Flash program store, 256 KB SRAM, hardware FPU, crypto accelerator, 12-bit ADC, multiple UART/SPI/I2C/CAN/Ethernet interfaces, and integrated USB 2.0 high-speed PHY. The 64-QFN (9x9 mm) package includes an exposed pad for thermal dissipation and is rated industrial temperature range (-40C to +85C). The trailing -I/MR suffix designates industrial grade in 64-QFN Tape & Reel packaging. The architecture uses a 5-stage pipeline MIPS Warrior M-class core with DSP extensions and a separate bus matrix for instruction and data, achieving 1.57 DMIPS/MHz. The device integrates a dual-panel graphics controller, 16-bit parallel master port for external bus, and a complete TCP/IP acceleration stack offload engine, allowing designers to drop in networking and graphics without an external controller. Typical applications include industrial automation controllers, IoT gateways with Ethernet, secure connected devices, HMI panels with TFT LCD, motor-control FOC drives, and automotive body/comfort ECUs. The crypto engine suits TLS/secure-boot designs, while the dual CAN-FD bus interface supports automotive network nodes. When designing with this part, provide sufficient decoupling on all VDD/VSS pairs (100 nF + bulk 4.7 uF minimum) and stitch the exposed pad with multiple thermal vias to the inner power plane. Confirm trace and bootloader size against your secure-boot image; the 256 KB SRAM must hold the largest TCP/IP socket buffer allocation you configure. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that are not collected in the manufacturer datasheet alone, giving procurement and design teams a single reference for the PIC32MZ1024EFK064T-I/MR.

USD $10,85 En stock

PIC32MZ1024EFK064T-I/PT

PIC32MZ1024EFK064T-I/PT - 32-bit 200MHz MCU, 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFK064T-I/PT is a high-performance 32-bit MIPS32 M-Class microcontroller running up to 200 MHz (330 DMIPS) with 1 MB Flash and 256 KB SRAM, housed in a 64-pin TQFP (PT) package. It integrates a Crypto engine, IEEE 754-compliant FPU, four 64-bit accumulators, single-cycle MAC, and DSP-enhanced saturating and fractional math, making it suitable for connectivity-intensive applications. What is a 32-bit MCU? A 32-bit microcontroller (MCU) is a single-chip computer with a 32-bit data path, register file, and arithmetic logic unit, enabling high-throughput processing for embedded systems. The PIC32MZ EF family sits at the top of Microchip's PIC32 line, providing a MIPS Warrior M-class core, advanced peripherals, and connectivity features. The taxonomy is: microcontroller -> embedded processor -> SoC -> semiconductor. Key features of the PIC32MZ1024EFK064T-I/PT include a 200 MHz core with 330 DMIPS performance, a double-precision FPU, 1 MB Flash program memory, 256 KB SRAM, USB 2.0 High-Speed On-The-Go, 10/100 Ethernet MAC, dual CAN modules, hardware Crypto engine, 12-bit ADC up to 18 Msps, analog comparators, and multiple SPI/I2C/UART interfaces. The 64-pin TQFP package enables compact PCB integration. The architecture uses a Harvard-based MIPS32 M-class core with separate instruction and data buses, supported by 8-channel DMA, a 16-bit parallel master port, and configurable I/O. The Crypto accelerator supports AES, DES, SHA, and HMAC, offloading cryptographic workloads from the CPU. The high-performance bus matrix enables concurrent peripheral operation with deterministic latency. Typical applications include industrial IoT gateways, automotive body and connectivity modules, HMI graphics displays, motor control drives, Ethernet-connected sensors, USB peripherals, and medical instrumentation. The combination of Ethernet, USB-HS, CAN, and Crypto makes the part a strong choice for secure connected nodes. Design considerations include proper decoupling of AVDD/AVSS rails, PCB layout for the 64-pin TQFP 10x10 mm footprint, and supply sequencing for analog and digital domains. Use the MPLAB Harmony ecosystem and the PIC32MZ EF family header files to accelerate firmware development. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for the PIC32MZ1024EFK064T-I/PT.

USD $6,12 En stock

PIC32MZ1024EFK100-E/PT

PIC32MZ1024EFK100-E/PT - 200MHz MCU, 1MB Flash, Crypto | Microchip

The Microchip Technology PIC32MZ1024EFK100-E/PT is a high-performance 32-bit MIPS M-class microcontroller running up to 200 MHz (330 DMIPS), integrating 1 MB of dual-panel Flash and 256 KB SRAM with FPU, crypto engine and CAN in a 100-pin TQFP package. It belongs to the PIC32MZ EF (Embedded Connectivity with Floating Point Unit) family, designed for connectivity-rich industrial, IoT, graphics/HMI and motor-control applications. What is a PIC32 microcontroller? A PIC32 is a 32-bit MIPS-based microcontroller from Microchip Technology that sits above the 16-bit PIC24/dsPIC and 8-bit PIC16/PIC18 families, targeting high-performance embedded applications that require large memory, DSP and connectivity. Within the PIC32 portfolio, the PIC32MZ EF family is the connectivity sub-line, integrating an IEEE 754-compliant single/double-precision FPU, four 64-bit accumulators, single-cycle MAC, saturating and fractional math, plus a crypto engine, CAN, USB-HS, Ethernet and advanced analog. Key features include 200 MHz / 330 DMIPS core performance, 1 MB dual-panel Flash for live firmware update, 256 KB SRAM with cache, an integrated crypto engine (AES, DES, SHA, MD5), 10/100 Ethernet MAC, USB 2.0 High-Speed OTG, two CAN 2.0b controllers, six UART, four SPI, five I2C, a 12-bit 5 Msps ADC with up to 48 channels, two analog comparators, and a parallel master port for external graphics or memory. The 100-pin TQFP package offers generous I/O with operating temperature of -40 °C to +125 °C (E suffix = extended). The crypto sub-line (EFK) adds the hardware AES/SHA block, which the EFH/EFG variants omit. Architecturally the device uses a 5-stage MIPS M-class pipeline with DSP extensions and dual-panel Flash that lets firmware swap between two banks during a live update without halting the CPU. The FPU is full IEEE 754 single/double precision, supporting 200 MHz single-cycle math. The MMU and 16 KB instruction cache plus 4 KB data cache shield the core from flash wait-states at full speed. Typical applications include industrial gateways and IoT edge nodes (Ethernet + USB + crypto), graphics HMI with TFT LCD, motor control and field-oriented control (FOC) drives, automotive body and infotainment ECUs (with the -I temperature grade for industrial, -E for extended), secure connected medical devices, and high-end consumer audio or smart-home hubs that need TLS/DTLS offload via the crypto engine. When designing with this part, pay attention to decoupling (1 x 10 µF bulk + 0.1 µF per VDD pin), trace impedance for the 50 MHz Ethernet RMII and the high-speed USB DP/DN pair, and the live-update firmware flow that relies on dual-panel flash and the bootloader NVM region. The E temperature grade (-40 °C to +125 °C) versus I grade (-40 °C to +85 °C) is a hardware-only difference that matters for harsh environments. This page synthesizes distributor pricing, drop-in alternatives and practical design notes not found in the manufacturer datasheet alone, giving procurement and design engineers a single source for the PIC32MZ1024EFK100-E/PT.

USD $8,12 En stock

PIC32MZ1024EFK100-I/GJX

PIC32MZ1024EFK100-I/GJX - 200MHz 32-bit MCU 1MB Flash TFBGA-100

The Microchip Technology PIC32MZ1024EFK100-I/GJX is a high-performance 32-bit MIPS M-class microcontroller running up to 200 MHz with 1 MB of Flash and 256 KB of SRAM, packaged in a 100-ball TFBGA (7x7 mm) for space-constrained industrial designs. It integrates a Crypto engine and CAN module alongside HS USB, Ethernet, and advanced analog peripherals targeting Industrial, IoT, Graphics/HMI, and Motor Control applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, data memory, and peripherals on one die. The PIC32MZ EF family sits within Microchip's 32-bit PIC32 portfolio and uses a MIPS32 M-class core with DSP extensions, a hardware IEEE 754 floating-point unit, and dual-panel Flash supporting live update field upgrades. This combination places the part in the high-performance segment of Microchip's line-up above PIC32MX and below the company's Cortex-M7 based SAME70/SAMS70 families. Key features include 200 MHz / 330 DMIPS core throughput, hardware crypto accelerator, 10/100 Ethernet MAC, HS USB 2.0 with integrated PHY option, CAN-FD, 12-bit ADC at up to 18 MSPS, and a dedicated graphics interface supporting parallel RGB displays. The 1 MB dual-panel Flash allows live firmware updates without downtime, a critical capability for connected industrial equipment that cannot tolerate maintenance windows. The device also exposes multiple SPI, I2C, UART, and PMP interfaces for peripheral expansion. Typical applications span industrial automation, IoT gateways with TLS security, automotive infotainment HMI panels, brushless motor drives, audio processing with DSP, and Graphical HMI panels driven by the integrated GPU-friendly peripherals. The wide -40C to +85C industrial temperature range makes it suitable for harsh factory and outdoor environments where consumer-grade parts would fail. When designing with this device, plan for a clean 3.3 V supply with low-noise LDO on AVDD/AVSS lines for ADC accuracy, and follow Microchip's TFBGA routing guidelines for fanout to inner balls. The Crypto engine and integrated security features mean developers should reserve flash and SRAM for TLS stacks and consider using the dual-panel feature for failsafe OTA updates.

USD $5,41 En stock

PIC32MZ1024EFK100-I/PT

PIC32MZ1024EFK100-I/PT - 32-bit MCU 200MHz 1MB Flash 100-TQFP | Microchip

The Microchip PIC32MZ1024EFK100-I/PT is a high-performance 32-bit MIPS microcontroller from the PIC32MZ EF family, delivering up to 200 MHz core speed with 330 DMIPS and an integrated IEEE 754-compliant FPU, housed in a 100-pin TQFP (PT) package measuring 12x12 mm. It features 1 MB of dual-panel Flash memory, 256 KB of SRAM, and dedicated crypto engines, targeting industrial, IoT, graphics/HMI, automotive, and motor-control applications requiring secure connectivity. A 32-bit MCU (microcontroller unit) is an integrated circuit containing a high-performance processor core, on-chip memory, and a rich peripheral set, designed to execute complex embedded firmware in real time. Within the embedded hierarchy, 32-bit MCUs sit above 8/16-bit MCUs and below microprocessors, with the PIC32MZ EF family specifically positioned for connectivity-rich applications with hardware crypto acceleration. These devices combine an M-class MIPS core with DSP extensions, four 64-bit accumulators, single-cycle MAC, and saturating/fractional arithmetic for high-throughput signal processing. Key features include a 200 MHz / 330 DMIPS MIPS M-class core with DSP-enhanced instruction set, IEEE 754-compliant dual-precision FPU for fast single/double-precision math, dual-panel Flash for live-update support, hardware crypto acceleration, and a peripheral set including USB-HS, Ethernet (ENET), CAN, and a 12-bit ADC. The 256 KB SRAM and 1 MB Flash enable complex protocol stacks (TLS, MQTT, HTTP) plus rich HMI graphics without external memory expansion. The -I/PT suffix designates the industrial temperature grade (-40C to +85C) and the 100-pin TQFP package. Technical depth: The PIC32MZ EF family uses a Harvard-architecture MIPS core with separate instruction and data buses, a 16KB instruction cache, and a tightly-coupled memory controller. The dual-panel Flash architecture allows simultaneous firmware read from one panel while writing to the other, enabling live firmware updates without external bootloaders. Hardware crypto engines accelerate AES, DES, 3DES, MD5, SHA-1, and SHA-256, offloading security workloads from the CPU for sustained network throughput. Typical applications include industrial Ethernet gateways, IoT edge nodes with TLS connectivity, automotive infotainment clusters, HMI/graphics terminals, BLDC and PMSM motor-control inverters, and secure connected medical devices. The wide peripheral mix (USB-HS, ENET, CAN, SQI, HS-I2C, SPI) eliminates external bridge chips in many designs. When designing with this device, ensure adequate decoupling on all VDD/VSS pairs (typically 100 nF ceramic per supply pin), respect the 200 MHz maximum clock with proper PLL configuration, and use the SEGGER J-Link or MPLAB ICD tools for firmware debug. The 12x12 mm TQFP footprint is pad-compatible with several PIC32MZ EF family members, enabling board scalability across the product line. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone Microchip datasheet, giving engineering and procurement teams a single source for evaluation.

USD $7,65 En stock

PIC32MZ1024EFK100T-E/GJX

PIC32MZ1024EFK100T-E/GJX - 200MHz 32-bit MCU 1MB Flash TFBGA-100 | Microchip

The Microchip Technology PIC32MZ1024EFK100T-E/GJX is a high-performance 32-bit MIPS M-Class microcontroller running up to 200 MHz with 1 MB of Flash and 256 KB of SRAM, housed in a 100-pin TFBGA (7x7 mm) package. It integrates an IEEE 754-compliant FPU, four 64-bit accumulators, single-cycle MAC, saturating and fractional math, plus a Crypto Engine for AES/DES/SHA hardware acceleration. The part carries the automotive-grade "/E" temperature descriptor (-40C to +125C) and is AEC-Q100 qualified for harsh-environment designs. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals (ADCs, timers, communication controllers). Within the broader taxonomy, the PIC32MZ EF family sits at the top of Microchip's 32-bit PIC32 portfolio, between the lower-tier PIC32MX and the multimedia-focused PIC32MZ DA family. EF specifically denotes the Embedded Connectivity with Floating Point Unit variant, optimized for industrial IoT, motor control, graphics/HMI, and automotive connectivity applications. Key features include 200 MHz core speed delivering up to 330 DMIPS, dual-panel Flash supporting live firmware updates, a 12-bit 5 MSPS ADC with up to 48 channels, eight UART, six SPI, four I2C, two CAN, USB 2.0 high-speed OTG, and Ethernet 10/100 MAC with MII/RMII. The 32-bit MIPS microAptiv core enables deterministic interrupt response and DSP-class math, while the integrated crypto accelerators and true random number generator (TRNG) make secure connected designs practical without external security ICs. The PIC32MZ EF architecture combines a 7-stage pipeline, branch prediction, and tightly-coupled instruction/data paths to sustain high code-density throughput. The 1 MB dual-panel Flash allows concurrent read/execute during erase/program of the alternate panel, enabling fail-safe field firmware upgrades. The TFBGA-100 (7x7 mm) package exposes 78 GPIO plus the full peripheral set while keeping PCB footprint small for space-constrained designs. Typical applications include industrial IoT gateways, automotive body and connectivity ECUs, motor control and inverter drive boards, graphics/HMI touch terminals, and USB/Ethernet-connected medical devices. The integrated peripherals eliminate many external components, reducing BOM cost and board area in connected embedded products. When designing with the PIC32MZ1024EFK100T-E/GJX, note that the automotive -40C to +125C range requires thermal-aware PCB layout (the TFBGA has limited heat dissipation). Decouple every VDD/VSS pair with 100 nF X7R ceramic placed within 2 mm of the balls, and follow Microchip's IBIS models for SDRAM/QSPI signal integrity on high-speed buses. This page synthesizes distributor stock data, drop-in same-package alternatives from the PIC32MZ family, and practical design notes not found on the standalone manufacturer product page.

USD $14,50 En stock

PIC32MZ1024EFK100T-I/GJX

PIC32MZ1024EFK100T-I/GJX - 200MHz 1MB Flash MCU | Microchip

The Microchip PIC32MZ1024EFK100T-I/GJX is a high-performance MIPS32 M-Class PIC32MZ microcontroller running up to 200 MHz (252 MHz capable on other family members), integrating 1 MB of dual-panel flash and 256 KB SRAM in a 100-pin TFBGA (7x7 mm) package. The device targets connectivity-rich embedded designs and includes a hardware floating-point unit (FPU), crypto engine, USB-HS, Ethernet MAC, and CAN peripherals on-chip. A 32-bit microcontroller (or MCU) is a programmable system-on-chip that integrates a processor core, volatile and non-volatile memory, and a rich set of digital and communication peripherals into a single IC. PIC32MZ devices sit at the high end of the 32-bit MCU spectrum, above Cortex-M3/M4 parts and below application processors; they combine deterministic real-time performance with high-throughput peripherals, making them suitable for industrial control, graphics HMI, motor drives, and connected IoT endpoints. Within the PIC32 taxonomy: PIC32MZ (high performance) > PIC32MX (mid-range) > PIC16 (8-bit legacy). Key differentiating features of the PIC32MZ EF family include a 200 MHz / 330 DMIPS MIPS M-class core with DSP extensions (four 64-bit accumulators, single-cycle MAC, saturating and fractional math), an IEEE 754-compliant double-precision FPU, dual-panel flash for live firmware updates without downtime, and integrated crypto accelerators (AES, SHA, RNG). The 1 MB of flash and 256 KB SRAM provide ample headroom for protocol stacks (TCP/IP, USB, graphics libraries) plus application code. The device operates across an industrial -40C to +85C temperature range. Typical applications include industrial Ethernet gateways, USB-HS device/host controllers, automotive-infotainment HMI panels, motor-control inverter boards, secure IoT edge nodes, and graphical touch displays. The hardware crypto engine plus on-board Ethernet and CAN make it well-suited for industrial networking and secure remote-management designs. When designing with the PIC32MZ1024EFK100T-I/GJX, pay attention to the 100-TFBGA package's fine pitch - PCB assembly requires no-clean flux and careful reflow profile. Decouple VDD/VBAT/AVDD rails per the datasheet reference circuit, and route the high-speed USB and Ethernet differential pairs with 90-ohm controlled impedance. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes beyond the manufacturer datasheet.

USD $9,48 En stock

PIC32MZ1024EFK100T-I/PF

PIC32MZ1024EFK100T-I/PF - 200MHz 1MB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MZ1024EFK100T-I/PF is a 32-bit MIPS M-class microcontroller built on the PIC32MZ EF family, delivering 200 MHz / 330 DMIPS performance with 1 MB of Flash and 256 KB of SRAM in a 100-pin TQFP (14x14 mm) package. It integrates an IEEE 754-compliant FPU for single- and double-precision math, a Crypto engine for hardware-accelerated AES/SHA/TDES/RNG, and a Hi-Speed USB 2.0 PHY plus 10/100 Mbps Ethernet MAC for connected designs. The 'T' suffix denotes tape-and-reel packaging and 'I/PF' denotes the -40C to +85C industrial temperature range in the 100-pin TQFP (PF) package. A 32-bit microcontroller is an integrated circuit that combines a 32-bit CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals (timers, communication interfaces, ADC/DAC, GPIO) on a single die. Microcontrollers occupy the tier below microprocessors in the embedded system hierarchy (MCU -> SoC -> embedded system) and are differentiated from microprocessors by their on-chip memory and peripherals, eliminating the need for external RAM, Flash, and many glue-logic devices. The PIC32MZ EF family specifically targets connected industrial, IoT, automotive, HMI graphics, and motor-control applications where a floating-point engine, large memory, and rich connectivity peripherals are essential. Key features include four 64-bit accumulators with single-cycle MAC for DSP workloads, dual-panel Flash enabling live field firmware updates, a 12-bit 18 MSPS ADC with up to 40 analog inputs on the 100-pin package, and a 200 MHz system clock with on-chip PLLs. The part also integrates two CAN 2.0B controllers, multiple I2S/SPIs/UARTs/I2Cs, and a parallel master port for external bus expansion, allowing designers to consolidate multiple discrete peripherals into one IC. Typical applications include industrial Ethernet gateways, IoT edge nodes, automotive dashboard HMI controllers, motor control drives, and connected medical instruments. When designing with this part, ensure the 100-pin TQFP layout provides adequate thermal copper pour because the 200 MHz operation can dissipate noticeable power under sustained DSP load. Decoupling should follow the Microchip reference design with one 0.1uF ceramic per VDD pin and a single 4.7uF bulk capacitor near the regulator output.

USD $6,08 En stock

PIC32MZ1024EFK100T-I/PT

PIC32MZ1024EFK100T-I/PT - 200MHz 32-bit MCU 1MB Flash | Microchip

The Microchip PIC32MZ1024EFK100T-I/PT is a high-performance 32-bit MIPS32 M-Class microcontroller running up to 200 MHz with 1 MB of Flash and 256 KB of SRAM, housed in a 100-pin TQFP (12x12 mm) package. Part of the PIC32MZ EF family, it integrates an FPU, crypto engine, and a rich peripheral set targeting industrial, automotive, IoT, graphics (HMI), and motor-control applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a wide range of peripherals on one die. The PIC32 family sits within the hierarchy: microcontroller -> embedded processor -> semiconductor device. The 'MZ' core implements the MIPS32r2 instruction set with DSP and FPU extensions, enabling deterministic real-time control alongside complex numeric workloads such as digital signal processing, motor-control algorithms, and graphics rendering. Key features of the PIC32MZ1024EFK100T-I/PT include 200 MHz CPU speed, 1 MB Flash program memory, 256 KB SRAM, an integrated crypto engine for AES/Hash/Random, eight DMA channels, nine timers, two comparators, and dual watchdog timers. The IC operates from 2.1 V to 3.6 V across an industrial temperature range of -40C to +85C and supports CAN, I2C, LIN, SPI, and UART interfaces for connectivity. The 100-pin TQFP package provides ample I/O for high-pin-count embedded designs. Architecturally, the PIC32MZ EF family uses a Harvard-style memory organization with separate Flash and SRAM buses, allowing simultaneous instruction and data fetches that maximize throughput at 200 MHz. The integrated FPU and DSP ASE accelerate floating-point and signal-processing kernels, while the cryptographic accelerator offloads AES, 3DES, SHA, and MD5 operations without burdening the CPU. The part number suffix EFK100 indicates the 1 MB Flash + 256 KB SRAM tier of the EF series. Typical applications include industrial IoT gateways, automotive body and connectivity modules, motor-control drives (BLDC/PMSM), Human-Machine Interface (HMI) graphics controllers, and Ethernet-connected sensor nodes. The wide peripheral mix (CAN, USB, Ethernet MAC, SQI) makes it well suited for connected embedded systems requiring deterministic real-time response. When designing with this MCU, ensure the 3.3 V supply is decoupled with bulk + ceramic capacitors near each VDD/VDDIO pin pair. JTAG/ICSP trace routing must be kept short and length-matched; for high-speed SPI or SQI memory expansion, impedance-controlled traces improve signal integrity. This page synthesizes distributor pricing, Microchip same-family cross-references, and practical hardware design notes not consolidated on the manufacturer datasheet, giving engineers a single reference for selection and PCB integration.

USD $7,85 En stock

PIC32MZ1024EFK124-I/TL

PIC32MZ1024EFK124-I/TL - 200MHz 32-bit MCU 1MB Flash 124-VTLA | Microchip

The Microchip Technology PIC32MZ1024EFK124-I/TL is a high-performance 32-bit microcontroller from the PIC32MZ Embedded Connectivity with Floating Point Unit (EF) family, featuring a MIPS32 M-Class core running at up to 200 MHz with 330 DMIPS performance. The device integrates 1 MB of Flash program memory and 256 KB of SRAM in a 124-pin VTLA (9x9 mm) surface-mount package, with the part's industrial-grade -40C to +85C operating temperature range. A 32-bit MCU (microcontroller unit) is a single-chip computer that integrates a processor core, program and data memory, and a rich set of on-chip peripherals. The PIC32MZ EF family is positioned in Microchip's high-performance connectivity tier, sitting above the PIC32MX and below the PIC32MZW wireless variants. It is part of the broader category hierarchy: 32-bit MCU -> MIPS/ARM-class microcontroller -> embedded connectivity processor -> system-on-chip (SoC) for IoT. The inclusion of a hardware floating-point unit (FPU) and a MIPS Warrior M-class core with four 64-bit accumulators and single-cycle MAC distinguishes this family from lower-end PIC32MX parts. Key features include the integrated FPU for IEEE 754-compliant floating-point math, DSP-enhanced instructions with saturating and fractional arithmetic, and a peripheral set that includes HS USB, Ethernet MAC, multiple UART/SPI/I2C, CAN, and a 12-bit ADC with up to 48 channels. The crypto engine (suffix-less 'EF' variant) accelerates AES, DES, SHA, and RNG operations for secure connectivity designs, while the high pin count of the VTLA-124 package exposes parallel bus and dual Ethernet interfaces for industrial HMI and motor-control applications. The architecture combines a 5-stage pipeline MIPS32 core with a dedicated Multi-Channel DMA engine and a 32 KB instruction cache, enabling deterministic real-time response alongside high throughput. Memory is organized as 1 MB Flash with live-update capability (dual-panel) plus 256 KB SRAM with optional ECC, and external bus interface (EBI) support is provided for expanding memory with parallel NOR/NAND devices. Typical applications include industrial Ethernet gateways, HMI touch panels, motor-control inverters, automotive infotainment, audio processing, IoT edge nodes with TLS, and graphical connectivity stacks. The wide peripheral mix allows a single chip to drive Ethernet + display + touch + motor control without external bridges. Designers should plan for proper decoupling (100 nF plus 4.7 uF bulk per VDD/VBAT pin pair), strict trace-length matching on Ethernet MII/RMII pairs, and use MPLAB Harmony v3 for the crypto and TCP/IP stacks. The 124-pin VTLA package has an exposed thermal pad that must be soldered to the PCB ground plane for electrical and thermal performance. This page synthesizes distributor pricing, drop-in alternative MPNs, and design guidance not found in the manufacturer datasheet alone.

USD $7,85 En stock

PIC32MZ1024EFK144-E/PH

PIC32MZ1024EFK144-E/PH - 32-bit MCU, 1MB Flash, 144-TQFP | Microchip

The Microchip Technology PIC32MZ1024EFK144-E/PH is a 32-bit MIPS32 M-Class microcontroller running up to 180 MHz with 1 MB Flash and 256 KB SRAM, packaged in a 144-pin TQFP (16x16 mm) and qualified to the AEC-Q100 automotive standard. It belongs to the PIC32MZ Embedded Connectivity with Floating Point Unit (EF) family, integrating a single-precision IEEE 754 FPU, four 64-bit accumulators, single-cycle MAC, and saturating/fractional math for DSP-grade throughput. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), data memory (SRAM), and integrated peripherals such as timers, communication interfaces, and analog blocks. Within the broader semiconductor hierarchy, the PIC32MZ EF sits between 8-bit MCUs and full application processors, targeting connectivity, graphics/HMI, and motor-control applications. MIPS32 M-Class cores deliver deterministic real-time performance with single-cycle execution, while the EF family adds hardware floating-point and cryptographic acceleration. Key features include 1 MB (1M x 8) of Flash with Dual Panel support for live update, 256 KB of SRAM, hardware crypto engine, AEC-Q100 Grade 2 qualification (-40C to +125C), and rich connectivity peripherals including Hi-Speed USB, Ethernet, CAN-FD, multiple UART/SPI/I2C, and a 12-bit ADC at 500 ksps. An integrated graphics controller drives TFT panels up to WVGA resolution without external RAM. The 144-pin TQFP footprint exposes up to 120 general-purpose I/O with multiple 5V-tolerant pins. Architecturally, the device couples a 5-stage pipelined MIPS Warrior M-class core with a tightly-coupled FPU and a multi-channel DMA controller, achieving 330 DMIPS at 200 MHz core clock while sustaining low interrupt latency. Cryptographic acceleration includes AES, 3DES, SHA, MD5, and true random number generation, supporting secure-boot and TLS applications. Typical applications include industrial IoT gateways, automotive HMI clusters, secure connected sensors, motor-control inverter boards, and graphics-rich operator panels. When designing, ensure the 2.1-3.6 V supply rail is properly decoupled and that the ICSP pair (PGECx/PGEDx) is accessible for in-field firmware updates.

USD $8,10 En stock

PIC32MZ1024EFK144-I/JWX

PIC32MZ1024EFK144-I/JWX - 200MHz 32-bit MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFK144-I/JWX is a 32-bit MIPS32 M-Class microcontroller running at 200 MHz with 1 MB (1024 KB) of Flash and 256 KB of SRAM, packaged in a 144-ball Thin Fine-Pitch BGA (TFBGA) measuring 7x7 mm with 0.65 mm pitch. It is a member of the PIC32MZ EF family of Embedded Connectivity with Floating Point Unit devices, integrating an IEEE 754-compliant FPU and a DSP-enhanced core with four 64-bit accumulators and single-cycle MAC, saturating, and fractional math. According to the Microchip product page, the EF family targets connectivity applications in Industrial, Automotive, IoT, Graphics (HMI) and Motor Control market segments, supporting up to 2 MB Flash and 512 KB SRAM across the family. A microcontroller (MCU) is an integrated circuit containing a CPU core, program memory (Flash), data memory (SRAM), and a rich set of on-chip peripherals (UART, I2C, SPI, ADC, timers, GPIO) on a single silicon die. Modern 32-bit MCUs such as the PIC32MZ family occupy the high-performance tier of the microcontroller taxonomy: microcontroller -> 32-bit MCU -> ARM/MIPS Cortex- and Warrior-class MCU -> high-performance connectivity MCU with FPU and DSP. They are differentiated from 8/16-bit MCUs by wider datapaths, higher clock rates, larger memory, and DSP/FPU capabilities, and from microprocessors (MPUs) by integrating memory and peripherals on-chip. Key features of the PIC32MZ1024EFK144-I/JWX include: 200 MHz core delivering up to 330 DMIPS, dual-panel Flash supporting live update, hardware crypto engine, two CAN modules, high-speed USB, Ethernet, 12-bit ADC, SQI (Serial Quad Interface) for external memory, and a peripheral pin select (PPS) system that allows flexible remapping of digital peripherals to GPIO. The device operates from 2.3 V to 3.6 V and supports an industrial temperature grade of -40°C to +85°C (the I suffix). From an architecture standpoint, the PIC32MZ EF core is a 32-bit Harvard architecture with separate Flash and SRAM buses, prefetch cache to mask Flash latency, and a tightly-coupled FPU. The 144-ball TFBGA package exposes up to 120 GPIO lines via the peripheral pin select, making the device well-suited to graphics HMI panels, multi-protocol gateway designs, and motor-control firmware where high CPU throughput and deterministic interrupt response matter. Typical applications include industrial IoT gateways with Ethernet and CAN, graphical HMI panels with TFT LCD driving, automotive connectivity and body controllers (non-AEC-Q100 grade), brushless-DC and stepper motor control, and high-performance consumer connectivity products. Designers leverage the FPU for sensor-fusion DSP, the crypto engine for TLS/DTLS acceleration, and the dual-panel Flash for secure firmware-over-the-air (FOTA) update flows. When planning layout for this part, place 0.1 µF decoupling capacitors adjacent to every VDDCORE/VDDIO pair and follow Microchip's BGA fanout recommendation in the datasheet PCB layout section, since 0.65 mm-pitch BGA escape routing is non-trivial. Designers should also budget for the chip's internal core voltage regulator stabilization network (4.7 µF + 0.1 µF) before issuing the board layout, and confirm the device variant's temperature grade and Flash size against your firmware image and environmental spec. This page synthesizes distributor stock, pricing, drop-in same-package alternatives from the PIC32MZ EF family, and practical design considerations not found in a single datasheet, helping engineers shorten the BOM, layout, and qualification cycle for a 200 MHz-class 32-bit MCU with FPU.

USD $3,10 En stock

PIC32MZ1024EFK144-I/PH

PIC32MZ1024EFK144-I/PH - 200MHz 32-bit MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFK144-I/PH is a high-performance 32-bit MIPS32 M-Class microcontroller running at 200 MHz with 330 DMIPS, integrating 1 MB of Flash and 256 KB of SRAM in a 144-pin TQFP (16x16 mm) package, industrial temperature grade -40C to +85C. The device is part of the PIC32MZ EF (Embedded Connectivity with Floating Point Unit) family, featuring an FPU, DSP-enhanced core with four 64-bit accumulators and single-cycle MAC, and Dual Panel Flash for live-update support, enabling robust firmware-over-the-air designs. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and a rich set of peripherals. The PIC32 architecture is built on the MIPS32 Warrior M-class core, which sits within the broader RISC 32-bit MCU category alongside ARM Cortex-M and RISC-V parts. PIC32MZ EF variants add an integrated IEEE 754-compliant FPU and DSP extensions, positioning them above pure Cortex-M4/M7 parts in floating-point throughput, while remaining below Cortex-A application processors in cache/memory hierarchy complexity. Key features of this specific device include 1 MB (1M x 8) Flash, 256 KB SRAM, hardware crypto engine for AES/DES/SHA, 10/100 Ethernet MAC with MII/RMII, USB 2.0 High-Speed OTG, six UART, four SPI, two I2C, two CAN 2.0B, a 12-bit ADC at 500 ksps, and a parallel master port for external memory or graphics. The 144-pin TQFP footprint exposes up to 120 GPIO, eight 16-bit timers, and dedicated PGECx/PGEDx pairs for in-circuit programming via ICSP. Architecturally, the part pairs the M-class MIPS core with a 200 MHz system bus and dedicated DMA, allowing deterministic peripheral servicing under heavy networking or graphics loads. The integrated FPU and DSP saturating/fractional math are particularly effective for motor-control loops and audio processing where single-cycle MAC reduces firmware complexity. Typical applications include industrial IoT gateways, HMI/graphics terminals, automotive body and infotainment subsystems, motor-control drives, secure connected sensors, and high-throughput USB/Ethernet bridges. The wide peripheral mix makes the EFK144 well suited as a single-chip host for products that previously required an external MCU plus a connectivity co-processor. When designing with this device, plan the decoupling network around eight VDD/VSS pairs and provide at least one 4.7 uF bulk capacitor near the VCAP pin. Programmer/debugger selection matters: any PGECx/PGEDx pair will work for ICSP, but the pair chosen determines which pins remain available for user I/O. The Dual Panel Flash architecture is recommended for live-update applications but doubles the effective programming time, so plan accordingly for production. This page synthesizes distributor pricing, drop-in Microchip PIC32MZ family alternatives, and practical design notes not found in the manufacturer datasheet alone, giving engineers a single reference for component selection, sourcing, and board bring-up.

USD $11,40 En stock

PIC32MZ1024EFK144-I/PL

PIC32MZ1024EFK144-I/PL - 200MHz 32-bit MCU 1MB Flash 144-LQFP

The Microchip Technology PIC32MZ1024EFK144-I/PL is a 200 MHz 32-bit MIPS M-Class microcontroller with 1 MB Flash and 256 KB SRAM, housed in a 144-pin LQFP (20x20 mm) package. It integrates hardware Floating Point Unit (FPU), Crypto engine, Hi-Speed USB, Ethernet MAC, CAN, and advanced analog peripherals targeting connectivity, industrial, and graphics (HMI) applications. Operating voltage range is 2.1 V to 3.6 V with industrial temperature grade of -40C to +85C. A 32-bit microcontroller (MCU) is a microprocessor core optimized for embedded control, integrating CPU, memory, peripherals, and I/O on a single die. Within the taxonomy, the PIC32MZ EF family belongs to: 32-bit MCU -> MIPS M-Class core -> high-performance MCU -> PIC32 family -> Microchip MCU portfolio. The EF suffix designates the Embedded Connectivity with Floating Point Unit variant, which adds an IEEE 754-compliant single-precision FPU and DSP extensions, alongside high-bandwidth connectivity peripherals required for Ethernet and USB-based designs. Key features include 200 MHz / 330 DMIPS core performance, 1 MB Flash program memory, 256 KB SRAM data memory, integrated Crypto engine supporting AES/SHA/RNG, Hi-Speed USB 2.0 with integrated PHY, 10/100 Ethernet MAC with IEEE 1588 support, dual CAN 2.0b ports, 12-bit ADC up to 500 ksps, multiple UART/SPI/I2C peripherals, and a wide operating voltage range of 2.1 V to 3.6 V. The integrated FPU and DSP extensions accelerate floating-point and signal-processing workloads. Typical applications include industrial automation controllers, Ethernet-connected IoT gateways, USB Host/Device peripherals, automotive HMI clusters, motor control inverters, and graphics display terminals. The combination of Ethernet, USB, and CAN in a single 144-LQFP package reduces BOM count in connectivity-intensive designs. When designing with this MCU, allocate sufficient decoupling capacitance (100 nF plus bulk 4.7 uF) on every VDDCORE and VDDIO pin, route the differential USB D+/D- lines with 90-ohm differential impedance, and follow Microchip's recommended 144-LQFP PCB layout guidelines for the exposed-pad thermal pad. This page synthesizes distributor pricing, drop-in PIC32MZ EF family alternatives, and practical design notes not found in the manufacturer datasheet, supporting rapid part selection for embedded engineers.

USD $12,30 En stock

PIC32MZ1024EFK144T-I/PH

PIC32MZ1024EFK144T-I/PH - 200MHz 1MB Flash MCU | Microchip

The Microchip Technology PIC32MZ1024EFK144T-I/PH is a high-performance 32-bit MIPS MCU from the PIC32MZ EF family, featuring a MIPS Warrior M-class core running at up to 200 MHz with 330 DMIPS throughput, 1 MB of Flash, and 256 KB of SRAM, housed in a 144-pin TQFP (PH) package measuring 16x16 mm. It integrates an IEEE 754-compliant FPU, four 64-bit accumulators, single-cycle MAC, saturating and fractional DSP math, plus a Crypto engine and Dual Panel Flash for live field updates. A 32-bit microcontroller (MCU) is a programmable processor that executes instructions from on-chip Flash, uses SRAM for data, and exposes peripherals through configurable I/O. Within the taxonomy, the PIC32MZ EF family sits at the intersection of microcontrollers and high-performance microcontrollers, with subcategories including connectivity MCU, motor-control MCU, and graphics (HMI) MCU. PIC32MZ EF devices target embedded designs that need GHz-class host throughput on a deterministic MIPS architecture with deterministic interrupt latency. Key features include up to five I2C interfaces, up to three SCI/UART interfaces, SPI, CAN, USB-HS, Ethernet MAC, and a 12-bit ADC at up to 18 MSPS. The Crypto engine accelerates AES, DES, 3DES, SHA, and MD5 for secure-boot and TLS applications. Dual Panel Flash enables live firmware updates without downtime, critical for industrial and IoT gateways that cannot tolerate service interruption. A full-speed USB 2.0 High-Speed OTG controller, dual CAN 2.0b controllers, and a 10/100 Ethernet MAC make this part well-suited to connected industrial nodes. Architecturally, the PIC32MZ EF uses a 5-stage pipeline, hardware multiplier/accumulator, and a tightly coupled FPU. The Crypto engine shares the system bus through dedicated registers, allowing AES-256 encryption at line rate for streaming protocols. The Dual Panel Flash is implemented as two physically separate Flash arrays that the linker can remap at runtime, so a fallback image is always available if a firmware update is interrupted. Typical applications include industrial IoT gateways with TLS-encrypted MQTT, automotive infotainment and HMI clusters, motor-control servo drives, secure-connected medical devices, and graphical HMI panels using external TFT controllers. In each case, the combination of FPU throughput, integrated crypto, and rich connectivity removes the need for an external security coprocessor or FPGA. Designers should plan a PCB stack-up that keeps the 200 MHz core and the analog supply domains separated; place the 12-bit ADC VREF bypass as close to the package as possible. The Dual Panel Flash feature requires the linker to be configured with two image slots, and the bootloader must verify the new image's signature before remap. This page synthesizes distributor pricing, drop-in PIC32MZ EF alternatives, and engineering design notes that are not duplicated on the Microchip datasheet.

USD $8,90 En stock

PIC32MZ1024EFK144T-I/PL

PIC32MZ1024EFK144T-I/PL - 200MHz 1MB Flash 32-bit MCU | Microchip

The Microchip PIC32MZ1024EFK144T-I/PL is a high-performance 32-bit MIPS MCU from the PIC32MZ Embedded Connectivity with Floating Point Unit (EF) family, delivering 200 MHz / 330 DMIPS performance with 1 MB of Flash and 256 KB of SRAM in a 144-pin LQFP (20x20 mm) package. This industrial-temperature variant integrates a MIPS32 M-Class Warrior core with DSP enhancements, an IEEE 754-compliant single-precision FPU, and a hardware crypto accelerator that supports AES, 3DES, SHA, MD5, HMAC, and RNG for secure connectivity applications. A 32-bit microcontroller (MCU) is an embedded processor that executes instructions over a 32-bit data path, enabling significantly higher throughput than 8-bit or 16-bit devices. The PIC32MZ EF family sits within the broader hierarchy of microcontroller -> embedded processor -> semiconductor IC, combining CPU, memory, and peripherals on a single die. Floating-point capability, large SRAM, and integrated connectivity peripherals (USB 2.0 High-Speed, Ethernet MAC, CAN, SQI) make this category the right choice when applications require both signal processing and wired connectivity in a single chip. Key features include dual-panel Flash for live firmware updates, four 64-bit accumulators with single-cycle MAC, saturating and fractional math support, an 8-channel DMA controller, nine timers, two comparators, two watchdog timers, and an RTC. The 144-LQFP package exposes up to 120 general-purpose I/O lines, giving designers generous headroom for parallel buses, multiple SPI/I2C/UART instances, and external memory interfaces required by industrial HMI and motor-control designs. Typical applications include industrial Ethernet gateways, USB-to-UART bridges, motor-control inverters, automotive infotainment head units, and secure IoT edge nodes that require on-chip crypto. The integrated Ethernet MAC and USB-HS PHYs reduce BOM cost, while the 252 MHz-capable sibling (PIC32MZ1024EFK144T-250I/PL) offers additional headroom for graphics-heavy HMI workloads. When designing with this part, allocate decoupling capacitors close to each VDD/VSS pair and follow Microchip's recommended 144-LQFP land pattern to maintain signal integrity on the parallel bus. The industrial (-40C to +85C) temperature grade suits outdoor and factory-floor deployments but is not qualified to AEC-Q100; for automotive projects, choose the PIC32MZ1024EFK144T-E/PL extended-temperature variant or a Q-grade part.

USD $11,40 En stock

PIC32MZ1024EFM064-E/MR

PIC32MZ1024EFM064-E/MR - 200MHz 32-bit MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFM064-E/MR is a high-performance 32-bit microcontroller from the PIC32MZ Embedded Connectivity with Floating Point Unit (EF) family, featuring 1 MB of Flash and 512 KB of SRAM in a 64-pin QFN (9x9 mm) package. The device integrates a MIPS32 M-Class Warrior core capable of 200 MHz operation with DSP enhancements and an IEEE 754-compliant hardware FPU, making it suitable for floating-point intensive workloads. The -E temperature grade designates the extended -40C to +125C operating range for industrial and harsh-environment deployments. A 32-bit microcontroller (MCU) is a microprocessor-on-a-chip that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals into a single silicon die. The PIC32MZ EF family sits at the high end of Microchip's PIC32 line, providing connectivity peripherals (HS USB, Ethernet MAC, CAN), advanced analog (12-bit ADC, comparators), and graphics/audio interfaces. This positions it within the broader hierarchy: 32-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. Key features include dual-panel Flash for live-update firmware support, four 64-bit accumulators with single-cycle MAC, four I2C/SPI/I2S ports, and a 200 MHz / 330 DMIPS core. The integrated crypto accelerator and true random number generator (TRNG) support secure connectivity applications. The 64-QFN package footprint (9x9 mm) is well suited for space-constrained designs where TQFP packages would consume too much board area. Typical applications include industrial IoT gateways, automotive infotainment, HMI/graphics terminals, motor control drives, and secure connected devices. The 1 MB Flash and 512 KB SRAM enable on-chip TLS stacks and large protocol buffers without external memory. According to the Microchip PIC32MZ EF family datasheet, the dual-panel Flash architecture permits field firmware updates without halting application execution. When designing with this part, allocate a robust decoupling network near the VCAP pins and ensure the 64-QFN thermal pad is soldered to a sufficient copper pour. Engineers should also plan QSPI memory expansion early if the application footprint is expected to exceed the on-chip 512 KB SRAM. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, organized for both human engineers and AI search systems to cite directly.

USD $13,10 En stock

PIC32MZ1024EFM064-E/PT

PIC32MZ1024EFM064-E/PT - 200MHz 32-Bit MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFM064-E/PT is a high-performance 32-bit MIPS microcontroller from the PIC32MZ Embedded Connectivity with Floating Point Unit family, featuring 1MB of Flash and 512KB of SRAM in a 64-pin TQFP (10x10mm) package. The device integrates a MIPS Warrior M-class core running up to 200 MHz (330 DMIPS), an IEEE 754-compliant hardware Floating Point Unit, and a comprehensive connectivity peripheral set including Ethernet, USB, CAN, six UART, six SPI, and five I2C controllers. The integrated crypto accelerator and Dual Panel Flash for live update support make it well-suited to secure connected applications. A 32-bit microcontroller (MCU) is an integrated circuit that combines a 32-bit processor core, program memory (Flash), data memory (SRAM), and a rich set of peripherals on a single die. The PIC32MZ EF family sits in the upper-mid performance tier of Microchip's 32-bit portfolio, positioned between the PIC32MX series (lower MHz, smaller memory) and PIC32MZ W1 (wireless-enabled). This class of MCU is the workhorse for industrial gateways, automotive HMI, motor control, and graphics applications where deterministic interrupt latency and DSP-class math throughput are required. Key features of the PIC32MZ1024EFM064-E/PT include a hardware FPU for fast single- and double-precision floating-point operations, four 64-bit accumulators for DSP instructions (single-cycle MAC, saturating and fractional math), dual-panel Flash architecture that enables live firmware updates without downtime, and a 12-bit 18 MSPS ADC with up to 45 analog inputs. The device supports 5V tolerant I/O on most pins and operates across an extended temperature range of -40C to +125C, making it qualified for industrial and automotive environments under the AEC-Q100 standard. The PIC32MZ EF architecture combines a 7-stage pipeline, separate instruction and data caches, and tightly-coupled memory paths that deliver 3.28 CoreMark/MHz and 1.59 DMIPS/MHz. The on-chip crypto engine supports AES, DES, 3DES, SHA-1/SHA-256, and HMAC, offloading secure boot and TLS handshake operations from the application core. The 64-pin TQFP package exposes 53 general-purpose I/O pins, four USB OTG-capable pins, and a 10/100 Ethernet MAC with integrated PHY interface, enabling compact PCB designs without external glue logic. Typical applications include industrial Ethernet gateways and PLCs, automotive HMI clusters with TFT-LCD driving, IoT edge nodes with TLS-secured MQTT communication, motor control FOC drives, and graphical operator panels. In each of these scenarios the combination of deterministic real-time performance, hardware FPU, and integrated connectivity peripherals reduces BOM cost and board area versus multi-chip architectures. When designing with this part, allocate generous decoupling on the 1.2V core LDO output pin and follow Microchip application note TB3118 for PCB layout guidelines to minimize EMI on high-speed Ethernet and USB traces. The 64-pin TQFP leaves the 100- and 144-pin variants as scale-up options if additional I/O or memory is required later. This page synthesizes verified distributor pricing, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving sourcing, design, and procurement engineers a one-stop reference.

USD $9,65 En stock

PIC32MZ1024EFM064-I/MR

PIC32MZ1024EFM064-I/MR - 200MHz 32-bit MCU 1MB Flash | Microchip

The Microchip PIC32MZ1024EFM064-I/MR is a high-performance 32-bit microcontroller from the PIC32MZ Embedded Connectivity with Floating Point Unit (EF) family, featuring a MIPS32 M-Class core running up to 200 MHz (330 DMIPS) and housed in a 64-pin QFN (MR) 9x9 mm package. It integrates 1 MB of Flash program memory and 256 KB of SRAM, with an additional 160 KB of data RAM for USB buffers and Ethernet descriptors. The part operates from 2.1V to 3.6V across the industrial temperature range of -40C to +85C and supports live-update firmware via dual-panel Flash technology. A 32-bit microcontroller (MCU) is a programmable logic device that executes instructions from on-chip memory using a 32-bit data path, enabling arithmetic and addressing operations on 32-bit words in a single cycle. Within the broader taxonomy, the PIC32MZ EF family sits at the top of Microchip's 32-bit MCU lineup (MCU -> microcontroller -> embedded controller -> semiconductor IC), above the PIC32MX and dsPIC families, and is positioned for connected applications requiring both numeric throughput and rich peripherals. Key features of this variant include a hardware Floating Point Unit (FPU) compliant with IEEE 754, a 12-bit ADC module capable of up to 18 Msps with up to 45 analog inputs, dedicated audio and graphics interfaces, HS USB 2.0 with integrated PHY, 10/100 Ethernet MAC with MII/RMII interface, and four I2C plus four SPI plus six UART peripherals. The DSP-enhanced core adds four 64-bit accumulators with single-cycle MAC, saturating and fractional math for motor-control and audio processing workloads. Architecturally the device combines separate bus masters for the CPU, DMA, and Flash controller, allowing concurrent data movement with instruction fetch. Live-update Flash enables field firmware upgrades without downtime by switching between two Flash panels. Cryptographic acceleration (TRNG/AES) is provided on EFM (F = Crypto), EFE = Ethernet, EFH = High-Speed, EFK = USB-HS variants - the 'M' suffix in this MPN specifically denotes the 1 MB Flash / 256 KB RAM subset with crypto acceleration enabled. Typical applications include industrial HMI and graphics touch panels, motor control and FOC motor drives, Ethernet-connected IoT gateways, audio playback and processing, and USB-enabled consumer devices. The QFN-64 footprint is footprint-compatible with other PIC32MZ EF 064-pin parts, simplifying PCB layout reuse across the family. When designing with this part, ensure the metal plane on the bottom of the QFN is soldered to a grounded VSS copper pour; failure to do so can degrade thermal performance by 20-30% and reduce EMC margins.

USD $8,95 En stock

PIC32MZ1024EFM064-I/PT

PIC32MZ1024EFM064-I/PT - 200MHz 32-bit MCU, 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFM064-I/PT is a high-performance 32-bit microcontroller built on the MIPS32 M-Class core, delivering 200 MHz / 330 DMIPS with a hardware IEEE 754 Floating Point Unit, 1 MB of dual-panel Flash, and 512 KB SRAM in a 64-pin TQFP (10x10 mm) package. The part integrates connectivity peripherals including USB 2.0 High-Speed, 10/100 Ethernet MAC, CAN, and a hardware Crypto engine, plus a 12-bit ADC and 12-bit DAC. It is rated for industrial temperature range -40C to +85C per the -I suffix. A PIC32 microcontroller is a 32-bit RISC MCU family from Microchip Technology based on the MIPS architecture, positioned above the 8-bit PIC16/PIC18 families and alongside the 16-bit PIC24/dsPIC families. In the taxonomy of embedded processors, PIC32 sits under 32-bit microcontrollers, which are a subset of microcontrollers (MCU), which in turn are a category of embedded processors and a member of the broader semiconductors/Integrated Circuits group. The "MZ" generation delivers the highest performance in the PIC32 line, and the "EF" sub-family adds Floating Point + Enhanced connectivity peripherals. Key differentiating features include 200 MHz operation with single-cycle MAC DSP extensions, dual-panel live-update Flash (a Microchip signature feature that allows OTA-style firmware swap with zero downtime), a FPU for IEEE 754 single/double precision math, four 64-bit accumulators, fractional math support, and dedicated crypto/hash engines for AES, SHA, and HMAC. The 64-pin TQFP package exposes 46 user I/O and the full USB-HS + Ethernet + CAN peripheral set. Architecturally, the PIC32MZ EF combines a MIPS Warrior M-class core running from a 200 MHz system clock with a multi-layer AHB/APB bus matrix that lets the DMA engine, Ethernet MAC, and USB-HS controller access memory in parallel without starving the core. The dual-panel Flash allows two independent program-memory banks that can be swapped atomically, enabling fail-safe firmware updates. Typical applications include industrial HMI and graphics, IoT connectivity gateways, USB peripherals and embedded hosts, motor control, automotive infotainment sub-systems, and secure-connected edge nodes that need hardware crypto acceleration. The combination of USB-HS, Ethernet, and CAN allows a single chip to bridge multiple field-bus and office-bus networks. A key design consideration: the 64-pin TQFP is footprint-compatible with several other PIC32MZ EF devices (different Flash sizes), allowing designers to swap to a smaller-density part later for cost-down without re-laying out the PCB. Ensure your debugger and programmer support the MZ family (MPLAB X IDE + ICD 4 / REAL ICE) and that the dual-panel Flash mode is correctly configured in your linker script. This page synthesizes distributor pricing, drop-in same-package alternatives, and design notes not found in the manufacturer datasheet alone.

USD $8,88 En stock

PIC32MZ1024EFM064T-I/MR

PIC32MZ1024EFM064T-I/MR - 32-bit 200MHz MCU 1MB Flash 64-QFN

The Microchip PIC32MZ1024EFM064T-I/MR is a high-performance 32-bit MIPS M-Class microcontroller running up to 200 MHz with 1 MB Flash and 512 KB SRAM, housed in a 64-pin QFN (MR) package. The part integrates USB-HS, ENET, CAN, and hardware Crypto accelerators targeting connectivity-intensive embedded applications. A 32-bit MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich peripheral set. Within the broader taxonomy, a 32-bit MCU belongs to microcontrollers -> integrated circuits -> semiconductors. The PIC32MZ EF family uses the MIPS32 microAptiv core and is Microchip's flagship high-performance line for industrial, IoT, graphics (HMI), and motor control market segments, combining deterministic real-time behaviour with high-throughput connectivity stacks. Key features include MIPS32 M-Class core with FPU and DSP extensions, 1 MB self-programmable Flash, 512 KB SRAM, hardware Cryptography engine (AES, 3DES, SHA, MD5, RNG), 200 MHz operation, 64-pin QFN (9x9 mm) package, integrated 10/100 Ethernet MAC, USB 2.0 High-Speed PHY/OTG, two CAN modules, six UART, four SPI, and five I2C peripherals. The 64-pin QFN package with an exposed pad enables compact PCB layouts while providing low thermal resistance. From an architectural perspective, the PIC32MZ EF family employs a five-stage pipeline with branch prediction and a tightly-coupled prefetch buffer, allowing sustained 1.5 DMIPS/MHz. The integrated Crypto engine offloads AES-128/192/256 and hash operations from the CPU, allowing deterministic response times in TLS/DTLS stacks. The device supports up to 32 channels of DMA and dedicated peripherals for graphics and motor control. Typical applications include industrial IoT gateways requiring Ethernet/USB connectivity, secure connected HMI with TFT displays, automotive telematics and V2X, motor-control drives, and medical monitoring equipment. The combination of high core speed and on-chip crypto acceleration makes it well suited to TLS/DTLS endpoints and OTA-firmware-update designs. Design consideration: the 64-pin QFN exposed pad must be soldered to a continuous copper pour to achieve the rated thermal performance. Decoupling capacitors should be placed as close as possible to each power pin pair, and the Ethernet PHY side requires a 49.9 ohm 1% precision resistor for the centre tap. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineering value beyond a typical product listing.

USD $9,05 En stock

PIC32MZ1024EFM064T-I/PT

PIC32MZ1024EFM064T-I/PT - 200MHz 32-Bit MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFM064T-I/PT is a 32-bit MIPS M-Class microcontroller running at up to 200 MHz, integrating 1 MB of dual-panel Flash and 512 KB of SRAM in a 64-pin TQFP (10x10 mm) package. It belongs to the PIC32MZ EF (Embedded Connectivity with Floating Point Unit) family and targets high-performance industrial, IoT, graphics/HMI, and motor-control applications. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a processor core, program and data memory, and a rich set of peripherals such as timers, communication interfaces, and analog blocks. The PIC32 family uses the MIPS Warrior M-class core and is positioned within Microchip Technology's portfolio as a high-performance line above 8-bit PIC and 16-bit dsPIC families, with ARM Cortex-M parts like STM32 and NXP i.MX as cross-architecture competitors. The EF suffix indicates the FPU-enabled, connectivity-rich variant of the PIC32MZ family, distinguished from the EFM (further integrated connectivity) sub-family and the lower-cost EC (no FPU) line. Key features include a hardware IEEE 754 single/double-precision floating point unit, four 64-bit accumulators for DSP instructions, a 12-bit 18 MSPS ADC with up to 45 analog inputs, USB 2.0 High-Speed with PHY, two CAN 2.0b modules, 10/100 Ethernet MAC with RMII/MII interface, and crypto acceleration (AES, 3DES, SHA, MD5, RNG). The dual-panel Flash architecture enables live firmware updates without service interruption, and 8 DMA channels offload data movement from the CPU. The architecture pairs the MIPS32 M-class core with a tightly-coupled FPU and DSP-enhanced MAC engine, achieving 330 DMIPS at 200 MHz. The 12-bit ADC delivers up to 18 MSPS with dedicated S&H, supporting touch and multi-channel sampling. Integrated high-speed USB PHY eliminates external transceiver cost on USB-FT design, and dedicated crypto accel handling AES/SHA offloads authentication from the application CPU, while dual CAN modules support automotive-grade CAN-FD bridging. Typical applications include industrial IoT gateways with Ethernet, USB and CAN connectivity, HMI/graphics terminals with TFT/LCD interfaces, automotive body and infotainment ECUs, motor control inverters (BLDC/PMSM FOC), medical monitoring with secure data handling, and secure connected sensors using on-chip crypto acceleration. When designing with this part, budget adequate decoupling (100 nF + 4.7 µF per VDD/VBAT/AVDD pair), keep analog and digital grounds separated with a single-point join under the IC, and ensure the 12 MHz crystal or external reference meets the USB HS PHY jitter spec (50 ppm RMS). The device operates from 2.3 V to 3.6 V; use a 3.3 V LDO such as MIC5219 or TPS7A4533 for noise-sensitive analog chains. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineering context for BOM decisions on PIC32MZ-based designs.

USD $8,78 En stock

Productos (18688)