Microcontroladores

Productos (18688)

PIC32MZ1024EFM100-E/GJX - 200MHz MCU 1MB Flash TFBGA-100 | Microchip
PIC32MZ1024EFM100-E/GJX

PIC32MZ1024EFM100-E/GJX - 200MHz MCU 1MB Flash TFBGA-100 | Microchip

The Microchip PIC32MZ1024EFM100-E/GJX is a high-performance 32-bit MIPS M-Class microcontroller running up to 200 MHz with 1 MB of Flash and 512 KB of SRAM, housed in a 100-pin TFBGA (7x7) package for industrial and automotive connectivity designs. The part carries the E temperature designation (-40C to +125C) and integrates a Floating Point Unit, hardware crypto engine, CAN, HS USB, and Ethernet MAC, enabling compact, single-chip connectivity nodes. A 32-bit microcontroller (MCU) is an integrated circuit that combines a 32-bit CPU core, program and data memory, and a rich set of peripherals on a single die. The PIC32MZ EF family extends the classic PIC32MX architecture with the MIPS microAptiv core family, executes up to 252 MHz in some variants, and targets embedded connectivity applications. Within the broader taxonomy, PIC32MZ EF belongs to: 32-bit MCU > MIPS M-Class MCU > microcontroller > embedded processor > semiconductor IC. Key features of this part include 1 MB (1M x 8) Flash, 512 KB SRAM, FPU for single-precision IEEE 754 math, a hardware crypto accelerator (AES/DES/SHA), dual CAN 2.0b controllers, HS USB 2.0 device/host/OTG, 10/100 Ethernet MAC, and a 12-bit ADC up to 2 MSPS. An integrated DMA controller and Peripheral Pin Select (PPS) provide flexible signal routing across the 100-pin BGA. Architecture-wise, the part uses the MIPS32 M-Class core with 5-stage pipeline, MPU for memory protection, and dual-bank Flash with live-update support. The wide peripheral set - including audio I2S, parallel camera interface, and up to six UART channels - allows the device to consolidate multiple functions, reducing BOM cost in industrial gateways and HMI panels. Typical applications include industrial IoT gateways with Ethernet and CAN, automotive HMI and instrument clusters, USB peripherals, secure-connected motor control, graphics TFT panels, and audio streaming nodes. The FPU accelerates DSP loops needed in field-oriented motor drive and digital audio processing. Design tip - use Microchip Harmony 3 framework and place a 12 nF bulk decoupling capacitor within 5 mm of each VDD/VSS pair to meet the noise margin of the 200 MHz core. Configure PPS carefully - default mapping after reset leaves many pins in safe analog state. This page combines distributor pricing, parameter-by-parameter comparison with same-package alternatives, and drop-in guidance curated for engineers sourcing the PIC32MZ1024EFM100-E/GJX in production.

USD $9,40 En stock
PIC32MZ1024EFM100-E/PF - 200MHz 1MB Flash MCU | Microchip
PIC32MZ1024EFM100-E/PF

PIC32MZ1024EFM100-E/PF - 200MHz 1MB Flash MCU | Microchip

The Microchip Technology PIC32MZ1024EFM100-E/PF is a 32-bit MIPS32 M-Class microcontroller from the PIC32MZ Embedded Connectivity with Floating Point Unit (EF) family, featuring 1MB (1M x 8) Flash program memory, 512KB SRAM, and a maximum CPU clock of 200 MHz delivering 330 DMIPS, housed in a 100-pin TQFP (14x14 mm, 0.5 mm pitch) package. This part operates from a 2.6V-3.6V core/supply rail and integrates a hardware Floating Point Unit (FPU), DSP extensions with four 64-bit accumulators and single-cycle MAC, and a Crypto engine accelerating ECC, AES and SHA for secure connectivity. According to the Microchip PIC32MZ-EF family datasheet DS60000663, the PIC32MZ1024EFM100-E/PF targets Industrial, HMI/Graphics, Motor Control, IoT, and Automotive segments and is qualified to AEC-Q100 where the -E temperature grade (-40C to +125C) applies. What is a PIC32MZ EF microcontroller? A PIC32MZ EF is a high-performance MIPS-based 32-bit MCU integrating FPU, DSP, large Flash/RAM, USB 2.0 High-Speed, 10/100 Ethernet MAC with MII/RMII, CAN 2.0B, SQI for external Quad-SPI Flash, and multiple UART/SPI/I2C peripherals, all inside the wider PIC32MX/PIC32MZ legacy under the 32-bit microcontroller umbrella. EF-family devices sit at the high end of the PIC32 family and are commonly used as the system master in graphics or motor-control designs where deterministic interrupt latency and fast DSP loops are required. Key features of the PIC32MZ1024EFM100-E/PF include 1MB dual-bank Flash with live update, 512KB SRAM (plus an additional 128KB tightly-coupled memory for DMA-accessible buffers), an integrated Crypto engine (AES-128/192/256, DES/3DES, SHA-1/256, ECC, RNG), USB 2.0 High-Speed (480 Mbps) with on-chip PHY, dual Ethernet MAC, dual CAN 2.0B, six UART/SPI/I2C, 16-channel 12-bit 5 MSPS ADC, four comparators, and a graphics controller with 2D-DMA. The 100-pin PF package is the 14x14 mm TQFP variant - select the PT variant (12x12 mm TQFP) only if the smaller 12x12 BGA-free footprint is what was specified in your design. Technical depth comes from the MIPS M14Kc-class CPU core (R4000-style) with hardware multiply/divide, single-cycle MAC, zero-cycle shadow register sets for fast interrupt response, and 16-entry fully-associative instruction/data caches. The peripheral pin select (PPS) remapping allows flexible pin assignments for digital functions. The E (Extended) temperature grade spans -40C to +125C and meets AEC-Q100 Grade 1 criteria where invoked. Typical applications include industrial automation controllers, automotive telematics and HMI clusters, IoT gateways, high-end graphics HMI touch panels, motor control FOC/PMS stages, and secure-connected USB/Ethernet products. Design considerations include proper decoupling (100nF per VDD pin plus bulk), trace impedance matching for USB 2.0 HS and Ethernet, and configuring the FPU/DSP via MPLAB XC32 with -mfloat-abi (specific flags documented in the family DS60000663 reference manual).

USD $8,46 En stock
PIC32MZ1024EFM100-E/PT - 32-bit MCU 1MB Flash 200MHz TQFP-100 | Microchip
PIC32MZ1024EFM100-E/PT

PIC32MZ1024EFM100-E/PT - 32-bit MCU 1MB Flash 200MHz TQFP-100 | Microchip

The Microchip Technology PIC32MZ1024EFM100-E/PT is a high-performance 32-bit microcontroller from the PIC32MZ EF family, featuring a MIPS32 M-Class core running up to 200 MHz with 330 DMIPS, 1 MB of program Flash, and 512 KB of SRAM, housed in a 100-pin TQFP (12x12 mm) package with an integrated Floating Point Unit and hardware crypto accelerator. The '-E' suffix denotes the extended temperature grade (-40C to +125C), and the '/PT' package designator identifies the 100-pin TQFP-100 (PT) outline, suitable for industrial, IoT, automotive, and graphics/HMI applications. The device integrates a rich peripheral set including USB, CAN, Ethernet, SQI, I2S, SPI, I2C, and UART interfaces, plus a 12-bit ADC and multiple timers. What is a PIC32MZ microcontroller? The PIC32MZ EF family is a family of 32-bit MIPS-based microcontrollers from Microchip Technology, categorized under microcontrollers -> embedded microcontrollers -> 32-bit MCUs -> integrated circuits. As a 32-bit MCU with floating-point unit, the PIC32MZ EF bridges the gap between traditional 8/16-bit microcontrollers and higher-end application processors, providing deterministic real-time performance with rich connectivity peripherals for industrial and connected applications. Key features include 1 MB of Flash (with ECC), 512 KB of SRAM, hardware FPU (IEEE 754 single/double precision), a crypto engine supporting AES, 3DES, SHA, MD5, and HMAC, plus a 200 MHz / 330 DMIPS MIPS M-class core. The device supports up to 4 SQI lanes for external serial Flash, includes a 12-bit 5 MSPS ADC with up to 48 channels, and a high-speed USB 2.0 OTG controller. Memory protection and a peripheral pin select (PPS) system provide design flexibility for pin remapping. The PIC32MZ EF architecture uses a 5-stage pipeline and dual-set associative branch prediction, with DSP enhancements including four 64-bit accumulators, single-cycle MAC, and saturating/fractional math. The integrated FPU accelerates single- and double-precision IEEE 754 operations, making the part suitable for sensor-fusion algorithms, motor-control loops, and audio processing. Typical applications include industrial automation controllers, IoT edge nodes with TLS-secured communications, automotive body and HMI systems, graphics HMIs with TFT displays, BLDC and stepper motor control, and medical device front panels. The combination of crypto acceleration and rich connectivity makes it well-suited for connected secure applications. Design considerations: ensure the 2.1V-3.6V supply rail is well-decoupled with 100 nF plus bulk capacitors near each VDD pin, and connect all AVDD/AVSS pairs individually filtered for ADC accuracy. The PPS system allows post-silicon peripheral remapping but must be programmed before application use. The information on this page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, with values as of 2026-10-04.

USD $8,70 En stock
PIC32MZ1024EFM100-I/GJX - 200MHz 32-bit MCU 1MB Flash TFBGA-100 | Microchip
PIC32MZ1024EFM100-I/GJX

PIC32MZ1024EFM100-I/GJX - 200MHz 32-bit MCU 1MB Flash TFBGA-100 | Microchip

The Microchip Technology PIC32MZ1024EFM100-I/GJX is a high-performance 32-bit MIPS MCU running up to 200 MHz with 1 MB of Flash and 512 KB of SRAM in a 100-pin TFBGA (7x7) package. It integrates a crypto engine, CAN, and a Floating Point Unit (FPU), targeting connectivity applications in industrial, IoT, graphics/HMI, and motor control segments of the PIC32MZ EF family. The device operates from a 2.1V to 3.6V supply. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals on one die. The PIC32MZ EF family belongs to the broader taxonomy of embedded 32-bit microcontrollers -> microcontrollers -> integrated circuits -> semiconductors. The MIPS32 M-Class core used here delivers 330 DMIPS, with single-cycle MAC, four 64-bit accumulators, and IEEE 754-compliant single/double-precision floating-point hardware that accelerates DSP and signal-processing workloads. Key features include 200 MHz core speed with dual-panel Flash for zero-wait-state execution, 1 MB Flash and 512 KB SRAM, an integrated crypto engine (AES, DES, SHA, RNG), dual CAN 2.0b controllers, Hi-Speed USB 2.0 (host/device/OTG), Ethernet MAC, 10/100 Ethernet MAC with RMII/MII interfaces, multiple UART/SPI/I2C peripherals, a 12-bit ADC at up to 18 Msps, and dedicated graphics/HMI peripherals including a graphics controller and parallel master port. The device also exposes up to 78 GPIO lines, two I2S/SPI audio interfaces, an SQI (Serial Quad Interface) for external Flash expansion, and a 16-channel DMA controller. Architecturally, the PIC32MZ EF combines an enhanced MIPS M-class core with dual-bank Flash to eliminate fetch stalls during erase/program operations, ensuring deterministic interrupt latency. The integrated FPU is fully IEEE 754 compliant, which removes the need for software emulation of floating-point math in control loops and sensor-fusion code. The on-chip crypto accelerator offloads AES/SHA workload, freeing CPU cycles for application code. Typical applications include industrial automation controllers, IoT edge nodes with TLS-secured connectivity, automotive infotainment/HMI clusters (consumer-grade temperature range), Ethernet-enabled motor control inverters, and graphic-touchscreen HMI panels. The 7x7 mm TFBGA package supports compact layouts where board area is at a premium. Designers using this MCU typically pair it with an external PHY for Ethernet, a SPI NOR Flash for data logging, and a 2.4 GHz wireless transceiver such as the Microchip ATWINC3400 for Wi-Fi. When designing with this device, pay close attention to decoupling: place a 100 nF X7R capacitor within 2 mm of every VDD/VDDIO pin pair, and add bulk 4.7 uF tantalum capacitors near the package perimeter to suppress switching transients. The crypto engine requires random seed initialization via the RNG and properly configured PRNG libraries from Microchip's MPLAB Harmony framework. Industrial users should verify the -I (Industrial) temperature grade suits their ambient range; automotive AEC-Q100 customers should look at the EFG/ECG family variants instead.

USD $8,05 En stock
PIC32MZ1024EFM100-I/PF - 200MHz 32-bit FPU MCU, 1MB Flash | Microchip
PIC32MZ1024EFM100-I/PF

PIC32MZ1024EFM100-I/PF - 200MHz 32-bit FPU MCU, 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFM100-I/PF is a high-performance 32-bit MIPS M-Class microcontroller with integrated Floating Point Unit (FPU), running up to 200 MHz and packaged in a 100-pin TQFP (14x14 mm). It integrates 1 MB of Flash program memory and 512 KB of SRAM, targeting connectivity-rich applications in industrial, IoT, graphics/HMI, and motor-control market segments. A 32-bit MCU is a microprocessor whose data path, registers, and ALU operate on 32-bit words, enabling single-cycle multiply-accumulate and hardware floating-point operations. The PIC32MZ EF family sits in Microchip's high-performance tier above PIC32MX and below the SAM E70/S70 ARM Cortex-M7 parts. Within the broader taxonomy: 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. An integrated FPU accelerates IEEE-754 single/double-precision math, critical for control loops, audio processing, and digital filter implementations. Key differentiating features include a Crypto engine supporting AES, 3DES, SHA, and MD5, a 200 MHz core with 252 MHz variants in the same family, a 12-bit 5 MSPS ADC, USB 2.0 High-Speed with on-chip PHY, dual CAN 2.0B controllers, and 10/100 Ethernet MAC with RMII/MII interface. The 100-pin TQFP gives access to six UART, six SPI, and six I2C peripherals, plus a parallel master port and PMP graphics capability, all within an industrial-grade -40C to +85C operating range. The device uses a 5-stage pipeline MIPS32 M-Class core with tightly-coupled prefetch buffer and 16 KB I-cache plus 16 KB D-cache, sustaining 1.56 DMIPS/MHz. Hardware DSP extensions handle audio codecs and motor-control algorithms with deterministic interrupt latency, while a dedicated Crypto accelerator offloads AES-256 and SHA-256 tasks from the CPU. Integrated SQI (Serial Quad Interface) and 16-bit PMP expand high-throughput external memory options. Typical applications include industrial Ethernet gateways with TLS acceleration, IoT edge nodes with secure firmware update, graphics HMI touch panels with TFT driving, and BLDC/PMSM motor drives. The combination of HS USB, dual CAN, and Ethernet makes it a single-chip solution for connected industrial controllers requiring deterministic real-time response and authenticated communications. When designing with this part, plan the trace layout for the TQFP-100 footprint, allow bypass capacitors on all VDD/VSS pairs per the datasheet, and note that the I-grade variant operates from -40C to +85C. The reference manual and family datasheet must both be consulted because peripheral configuration differs between F and E suffixes and between M/G/H/K package-density variants. This page synthesizes distributor pricing, same-package drop-in alternatives from the Site MPN list, and practical design notes not consolidated in the manufacturer datasheet or on Microchip's product page.

USD $8,40 En stock
PIC32MZ1024EFM100-I/PT - 200MHz 32-bit MCU 1MB Flash | Microchip
PIC32MZ1024EFM100-I/PT

PIC32MZ1024EFM100-I/PT - 200MHz 32-bit MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFM100-I/PT is a 32-bit MIPS32 M-Class microcontroller from the PIC32MZ EF family, running at up to 200 MHz (330 DMIPS) with 1 MB of Flash program memory and 512 KB of SRAM, housed in a 100-pin TQFP (12x12 mm) package. It is the high-integration variant of the PIC32MZ EF family, adding on-chip crypto accelerators, USB-HS, two CAN 2.0b modules, and a 10/100 Mbps Ethernet MAC, alongside a 200 MHz core and IEEE 754 floating-point unit (FPU). A 32-bit microcontroller (MCU) is an integrated system-on-chip that combines a high-performance processor core, program and data memory, and a rich set of peripherals on a single silicon die. Within the broader hierarchy, a microcontroller sits under microprocessor units (MPUs) for embedded control, itself a category of integrated circuits (ICs). The PIC32MZ EF family specifically targets connectivity-rich applications where deterministic real-time control must coexist with high-throughput wired/wireless communication stacks. Key features of the PIC32MZ1024EFM100-I/PT include DSP-enhanced core instructions (single-cycle MAC, four 64-bit accumulators, saturating and fractional math), a 12-bit 18-MSPS ADC with up to 40 analog inputs, six UART, four SPI, and I2S audio interfaces, plus a 16-bit parallel master port. The integrated crypto engine supports AES, 3DES, SHA, MD5, HMAC and RNG, allowing hardware-accelerated TLS/DTLS without taxing the application CPU. Architecturally, the PIC32MZ EF implements an M-Class MIPS core with a 5-stage pipeline and tightly-coupled prefetch cache, allowing sustained execution near the 200 MHz clock. The peripheral bus matrix provides DMA-driven data movement so that Ethernet, USB, and crypto transactions can proceed in parallel with mainline code execution, enabling deterministic latency even under heavy protocol load. Typical applications include industrial IoT gateways, automotive HMI and graphics dashboards, secure connected appliances, motor control, and high-speed point-of-sale terminals. The wide connectivity set (Ethernet, USB-HS, CAN, USB device/host/OTG) plus the crypto engine make it particularly well-suited to networked embedded designs that require TLS acceleration. When designing in this part, allocate the dual PGECx/PGEDx pairs carefully for ICSP programming, and verify that the high-current GPIO banks are supplied from a low-impedance rail to meet USB-HS and Ethernet PHY requirements. The exposed thermal pad of the TQFP package should be soldered to a copper pour for reliable thermal performance. This page synthesizes distributor pricing, drop-in alternatives, and design notes that complement the manufacturer datasheet, helping engineers select the right PIC32MZ variant for connectivity, HMI, or motor-control projects.

USD $6,30 En stock
PIC32MZ1024EFM100T-E/GJX - 200MHz 32-bit MCU 1MB Flash | Microchip
PIC32MZ1024EFM100T-E/GJX

PIC32MZ1024EFM100T-E/GJX - 200MHz 32-bit MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFM100T-E/GJX is a high-performance MIPS32 M-Class PIC32MZ 32-bit microcontroller running up to 200 MHz, integrating 1 MB (1M x 8) of Flash program memory and 512 KB of SRAM in a 100-pin TFBGA (7x7 mm) package. The device belongs to the PIC32MZ EF family and includes a single-precision hardware FPU, hardware crypto acceleration, USB 2.0 High-Speed OTG, 10/100Mbps Ethernet MAC, and dual CAN 2.0b controllers, all on-chip. The -E/GJX suffix designates the extended (-40C to +125C) operating temperature grade with 100-TFBGA package and tape-and-reel packaging. A 32-bit microcontroller (MCU) is a programmable processor that integrates CPU core, memory, and a rich set of peripherals into a single chip. Within the broader hierarchy, an MCU belongs to microcontrollers -> integrated circuits -> electronic components. The PIC32MZ EF family specifically targets connectivity-heavy applications such as industrial control, automotive infotainment, IoT gateways, HMI/graphics, and motor control where on-chip Ethernet, USB-HS, and CAN reduce BOM cost and PCB area. Key features include 1 MB Flash, 512 KB SRAM, MIPS32 M-Class core with FPU, 200 MHz operation, hardware crypto engine (AES, DES, SHA, RNG), 10/100 Ethernet MAC with RMII/MII interface, USB 2.0 High-Speed OTG with on-chip HS PHY, dual CAN 2.0b modules, SQI (Serial Quad Interface) for external Flash, and a 12-bit 18 MSPS ADC. The TFBGA-100 package supports low-pin-count designs while exposing 78 GPIO, 8 UART, 6 SPI, 5 I2C, and a parallel master port (PMP) for graphics. The architecture uses a 5-stage pipelined MIPS32 core with DSP extensions, separate instruction and data caches, tightly-coupled prefetch buffer, and a multi-layer AHB/APB bus matrix that delivers high peripheral throughput without CPU stalls. The crypto and connectivity accelerators offload Ethernet, USB, and AES/SHA workloads, making the device well-suited for secure connected nodes at industrial throughputs. Typical applications include industrial Ethernet IO modules, automotive CAN gateways with diagnostics, secure IoT edge nodes with TLS acceleration, USB-HS device/HMI controllers, and graphical HMI panels with resistive-touch sensing. Wide temperature range and AEC-Q100-grade process options support both factory-floor and cabin-mounted deployments. When designing with the PIC32MZ1024EFM100T-E/GJX, allocate sufficient PCB area for TFBGA fanout, follow Microchip's EMI/ESD layout guidelines for USB-HS and CAN, and provide a clean 3.3V rail with bulk decoupling near each supply pin. The integrated FPU and DSP extensions should be leveraged through MPLAB XC32 with -O2/-Ofast optimization to reach the 252 MHz core equivalent DMIPS throughput. This page synthesizes distributor pricing, drop-in same-package alternatives from the PIC32MZ EF family, and practical design notes not found in the manufacturer datasheet, giving engineers a single source for part selection, qualification, and sourcing.

USD $9,45 En stock
PIC32MZ1024EFM100T-I/PF - 200MHz 1MB Flash MCU | Microchip
PIC32MZ1024EFM100T-I/PF

PIC32MZ1024EFM100T-I/PF - 200MHz 1MB Flash MCU | Microchip

The Microchip Technology PIC32MZ1024EFM100T-I/PF is a 32-bit MIPS M-Class PIC32MZ microcontroller with integrated Floating Point Unit, running up to 200 MHz and delivering 330 DMIPS. The device integrates 1 MB of Flash program memory and 512 KB of SRAM, and is housed in a 100-pin TQFP package (14x14 mm). The "T" suffix denotes tape-and-reel packaging while the "I" indicates an industrial operating temperature range of -40C to +85C. An MCU (Microcontroller Unit) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals (ADCs, timers, communication interfaces). Microcontrollers sit inside the larger hierarchy of embedded computing devices -> microcontrollers -> 32-bit microcontrollers -> MIPS-based MCUs, and they are the central processing element for almost every connected embedded product. The PIC32MZ EF family targets connectivity-rich designs where large memory, USB-HS, Ethernet, and CAN interfaces are required. Key features of the PIC32MZ1024EFM100T-I/PF include a hardware crypto engine (AES, SHA, MD5, DES), a 200 MHz/330 DMIPS MIPS M-class core with DSP extensions, IEEE 754-compliant FPU, four 64-bit accumulators and single-cycle MAC with saturating and fractional math. The device exposes USB-HS (High Speed), Ethernet MAC, CAN, six UART/SPI/I2C modules, and a 12-bit 5 MSPS ADC with up to 48 channels. The 100-pin TQFP package supports parallel bus and extended peripherals via the EBIO/EBIH (External Bus Interface) pins. The architecture combines a high-performance pipeline, tightly-coupled instruction cache, and a dedicated crypto accelerator that offloads TLS/SSL handshakes and AES encryption without CPU intervention. The integrated 1 MB Flash with error-correcting code (ECC) and 512 KB SRAM enable complex protocol stacks (TCP/IP, USB-HS, graphics) to run on-chip without external memory. The 200 MHz core with DSP extensions makes the device equally suitable for motor-control DSP loops and HMI graphics rendering. Typical applications include industrial IoT gateways, automotive infotainment and connectivity, USB-HS peripherals, graphics/HMI controllers, secure-connected motor drives, and edge-AI sensor nodes. The wide peripheral mix and the integrated crypto engine are particularly compelling where TLS, secure boot, or field firmware updates are mandatory. When designing with this part, place a 10 uF plus 0.1 uF decoupling pair near every VDD/VSS pin group, route the 200 MHz-related clocks on the inner PCB layer with a continuous ground reference, and consult the family reference manual section on system-on-chip integration for clock-switching and power-mode entry. Designers migrating from PIC32MX should pay attention to the higher I/O count and 3.3 V tolerance differences. This page synthesizes distributor pricing (DigiKey, Mouser, LCSC), validated drop-in alternatives from Microchip's PIC32MZ EF family, and practical design notes that go beyond the manufacturer's datasheet - information an engineer can act on immediately.

USD $7,95 En stock
PIC32MZ1024EFM100T-I/PT - 200MHz 1MB Flash 32-bit MCU | Microchip
PIC32MZ1024EFM100T-I/PT

PIC32MZ1024EFM100T-I/PT - 200MHz 1MB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MZ1024EFM100T-I/PT is a high-performance 32-bit MIPS M-Class microcontroller running up to 200 MHz with 330 DMIPS performance, integrating 1 MB of Flash program memory and 512 KB of SRAM in a 100-pin TQFP (12x12 mm) package. The part features a MIPS32 microAptiv core with an FPU, DSP extensions (four 64-bit accumulators, single-cycle MAC), and dedicated Crypto acceleration for AES, DES, 3DES, SHA-1, SHA-256 and RSA algorithms. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, RAM, non-volatile program memory (Flash), and a rich set of on-chip peripherals such as timers, ADC, communication controllers, and GPIOs. Within the broader semiconductor taxonomy, this PIC32 part belongs to the high-performance MIPS-based 32-bit MCU family, which sits above 8-bit/16-bit microcontrollers in capability and below application processors in software complexity. PIC32MZ EF devices target connectivity-rich embedded applications. Key features of the PIC32MZ1024EFM100T-I/PT include a 12-bit 18 MSPS ADC with up to 48 analog channels, two CAN 2.0b modules, 10/100 Mbps Ethernet MAC with MII/RMII, USB 2.0 High-Speed OTG, six UART, three SPI, four I2C, a parallel master port (PMP) for graphics, and a 9-layer AHB bus matrix for high-throughput DMA. The wide operating voltage of 2.1 V to 3.6 V and industrial -40C to +85C temperature range suit harsh industrial and IoT deployments. Architecturally, the device combines a deterministic MIPS32 core with an integrated Crypto engine and a high-bandwidth bus fabric, allowing encrypted communication, secure boot, and parallel graphics display without external co-processors. The embedded FPU and DSP extensions accelerate signal-processing algorithms for motor control, audio codecs, and DSP front-ends. Typical applications include industrial control and HMI, IoT gateways with secure Ethernet/USB connectivity, automotive aftermarket infotainment, motor control (BLDC/PMSM), and graphical user interfaces via PMP or SPI displays. The on-chip crypto engine makes the part particularly attractive for secure connected nodes. For designs that require a wider temperature range or larger Flash, consider the PIC32MZ1024EFM100T-E/PT (-40C to +125C) or the 2 MB Flash EFK variant. Crypto features are mandatory for TLS/DTLS offload and secure firmware update pipelines. This page synthesizes distributor stock, real-time pricing, drop-in alternative MPNs, and practical design notes not found in the manufacturer datasheet, so engineers can evaluate supply and second-source options in one place.

USD $7,55 En stock
PIC32MZ1024EFM124-E/TL - 180MHz 1MB Flash MCU | Microchip
PIC32MZ1024EFM124-E/TL

PIC32MZ1024EFM124-E/TL - 180MHz 1MB Flash MCU | Microchip

The Microchip Technology PIC32MZ1024EFM124-E/TL is a 32-bit MIPS32 M-Class microcontroller running up to 180 MHz with 1 MB of Flash and 512 KB of SRAM, housed in a 124-pin VTLA (9x9 mm) package. It belongs to the PIC32MZ EF family, which targets high-performance connectivity applications including industrial automation, automotive, IoT, graphics/HMI, and motor control. The part integrates a hardware crypto accelerator, multiple ADC and DAC channels, DMA, PWM, and 97 I/O lines for rich peripheral integration. A 32-bit microcontroller (MCU) is a microprocessor with integrated Flash, RAM, peripherals, and interrupt controllers on a single die, providing a self-contained compute platform for embedded systems. The PIC32MZ EF family sits at the top of the PIC32 performance hierarchy (PIC32MX -> PIC32MZ EC -> PIC32MZ EF -> PIC32MZ W1) and combines a MIPS32 M-Class core with dedicated DSP instructions and a Floating Point Unit (FPU) for signal-processing workloads. Key specifications include 252 MHz maximum core clock (datasheet headroom), 180 MHz typical operation in this part, 1 MB program Flash, 512 KB SRAM, 4 KB EEPROM emulation, a 12-bit 5 MSPS ADC, and USB 2.0 High-Speed with on-chip PHY. The crypto engine supports AES, DES, 3DES, SHA-1, SHA-256, MD5, and HMAC for secure connectivity designs, while the integrated FPU accelerates floating-point math used in motor control and DSP loops. Architecturally, the PIC32MZ EF uses a five-stage pipeline MIPS32 M-Class core with separate I-cache and D-cache, dual-panel Flash for live update, and a Peripheral Pin Select (PPS) system that lets most digital peripherals be remapped to any of the 97 I/O pins. The 124-VTLA package is a thin-profile land-grid-array that maximizes pin density while keeping the board footprint at 9x9 mm. Typical applications include industrial Ethernet gateways, automotive body and HMI controllers, IoT edge nodes with TLS, motor-control FOC drives, and graphical touch-screen HMI panels. The combination of hardware crypto and high-speed USB simplifies connected-product designs where software cryptography would saturate the CPU. When designing with this device, plan the 124-VTLA PCB land pattern early; the 0.5 mm pitch requires fine-line PCB fabrication and via-in-pad is recommended for the central thermal/exposed pad. Decoupling follows the datasheet's recommended 100 nF per supply pin plus bulk capacitors on each power rail. This page synthesizes distributor pricing, verified drop-in alternatives from the PIC32MZ EF family, and practical PCB/decoupling notes not found in the manufacturer datasheet.

USD $9,45 En stock
PIC32MZ1024EFM124-I/TL - 200MHz 32-bit MCU, 1MB Flash, 124-VTLA | Microchip
PIC32MZ1024EFM124-I/TL

PIC32MZ1024EFM124-I/TL - 200MHz 32-bit MCU, 1MB Flash, 124-VTLA | Microchip

The Microchip Technology PIC32MZ1024EFM124-I/TL is a high-performance 32-bit microcontroller based on the MIPS32 M-Class core running up to 200 MHz, integrating 1 MB of Flash program memory and 512 KB of SRAM, and packaged in a 124-pin VTLA (9x9 mm) thermally-enhanced laminate package. A 32-bit MCU (microcontroller unit) is an integrated circuit that combines a processor core, program memory, data memory, and a rich set of programmable peripherals on a single die. The PIC32MZ EF family targets connectivity applications across industrial, IoT, graphics/HMI, and motor-control segments, with the M-class MIPS core providing deterministic real-time performance, 252 MHz peak operation, hardware multiply-accumulate, and DSP extensions for signal-processing workloads. Key features include 1 MB of Flash with ECC, 512 KB of SRAM, a 12-bit 18 MSPS ADC, USB 2.0 high-speed PHY, two CAN 2.0B controllers, Ethernet MAC with RMII/MII interfaces, multiple SPI/I2C/UART peripherals, and a 4-lane 16-bit parallel master port for graphics. The integrated FPU speeds floating-point math, while the crypto engine (in selected variants) accelerates AES/SHA operations. Architecturally, the device combines the MIPS microAptiv core with a 5-stage pipeline, dual-bank Flash for live updates, and an extensive peripheral set mapped through Microchip's Harmony peripheral library. The 124-VTLA package exposes the full peripheral count and provides an exposed thermal pad for improved heat dissipation at 200 MHz operation. Typical applications include industrial automation controllers, automotive infotainment/HMI, IoT edge gateways with Ethernet, motor control FOCs, and graphical touch-screen interfaces. The PIC32MZ EF family supports the MPLAB Harmony 3 framework for rapid firmware development. When designing, ensure the 124-VTLA pad layout includes thermal vias under the exposed pad and that decoupling capacitors are placed within 3 mm of each supply pin. Programming and debugging use the standard 4-wire ICSP interface with PGECx/PGEDx pin pairs. This page synthesizes distributor pricing, drop-in alternatives within the PIC32MZ EF family, application guidance, and practical design notes not consolidated in any single manufacturer or distributor page.

USD $8,05 En stock
PIC32MZ1024EFM144-E/JWX - 32-bit 180MHz MCU, 1MB Flash, Crypto | Microchip
PIC32MZ1024EFM144-E/JWX

PIC32MZ1024EFM144-E/JWX - 32-bit 180MHz MCU, 1MB Flash, Crypto | Microchip

The Microchip Technology PIC32MZ1024EFM144-E/JWX is a 32-bit MIPS32 M-Class PIC microcontroller running up to 180 MHz, integrating 1 MB of Flash and 512 KB of SRAM in a 144-pin TFBGA (7x7 mm) package. It is part of the PIC32MZ EF family, which targets connectivity, industrial, IoT, graphics/HMI, and motor-control applications with on-chip crypto acceleration, CAN, and Ethernet. What is a PIC32 microcontroller? A PIC32 is a 32-bit MIPS-based microcontroller from Microchip Technology that combines the simplicity of the PIC architecture with higher computational throughput. Within Microchip's portfolio the PIC32MZ EF family sits above the PIC32MX series and offers higher core speeds, larger memory, dedicated crypto engines, and richer connectivity peripherals. The PIC32 part-number string encodes family (MZ), memory density (1024 KB Flash), family sub-variant (EFM = EF with crypto and motor-control peripherals), pin count (144), temperature range (E = -40C to +125C), and package (JWX = 144-TFBGA). The PIC32MZ1024EFM144-E/JWX features a 32-bit MIPS32 M-Class core with hardware multiply/divide, a floating-point unit, an integrated crypto engine (AES, SHA, RNG), dual CAN modules, 10/100 Ethernet MAC with MII/RMII interfaces, USB 2.0 high-speed OTG, and up to 120 general-purpose I/O pins. It includes a 12-bit ADC at 18 MSPS, analog comparators, multiple PWM channels for motor control, and an on-chip DDR2 ready external memory bus. The device operates from 2.3V to 3.6V and is AEC-Q100 qualified for automotive applications. The 144-TFBGA package at 7x7 mm supports compact PCB layouts for space-constrained designs. An integrated FPU simplifies code development for graphics and signal-processing tasks, while the crypto accelerator offloads AES/SHA from the CPU, leaving more MIPS for application logic. Typical applications include industrial IoT gateways, automotive body and connectivity modules, HMI/graphics controllers, motor-control inverters, and secure connected devices. The combination of Ethernet, USB, CAN, and crypto makes it a strong choice for protocol-converter and secure-communication designs. When designing with this part, allocate a solid ground plane under the TFBGA and follow Microchip's recommended BGA land pattern with via-in-pad for clean power delivery. Use the supplied MPLAB Harmony code framework to initialize peripherals, and validate thermal performance in enclosed enclosures. This page synthesizes Microchip's PIC32MZ EF datasheet information, distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

USD $11,62 En stock
PIC32MZ1024EFM144-E/PH - 32-Bit 200MHz MCU 1MB Flash | Microchip
PIC32MZ1024EFM144-E/PH

PIC32MZ1024EFM144-E/PH - 32-Bit 200MHz MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFM144-E/PH is a 32-bit PIC32MZ EF microcontroller with a MIPS32 M-Class core running at 200 MHz, 1 MB of Flash program memory, 512 KB of SRAM, and an integrated IEEE 754-compliant floating point unit, housed in a 144-pin TQFP (16x16 mm) package. It is an extended-temperature (-40C to +125C) device with USB High-Speed, 10/100 Ethernet MAC, CAN, and a hardware crypto engine. A microcontroller (MCU) is a self-contained computer on a single chip that integrates a processor core, program memory (Flash), data memory (SRAM), and peripheral interfaces. The PIC32MZ EF family sits in the 32-bit MCU class, above 8-bit and 16-bit MCUs, and below application processors such as the PIC32MZ DA with integrated graphics. Within the Microchip hierarchy it belongs to the PIC32MZ Embedded Connectivity with Floating Point Unit (EF) family, which targets connectivity, industrial, IoT, graphics/HMI, and motor-control applications. Key features include 200 MHz operation (330 DMIPS), dual-panel Flash for live-update support, a DSP-enhanced core with four 64-bit accumulators and single-cycle MAC, and a full peripheral set: USB 2.0 High-Speed with on-chip PHY, 10/100 Ethernet MAC, CAN 2.0B, multiple UART/SPI/I2C, 12-bit ADC, and a random number generator with crypto acceleration. The 144-pin TQFP package exposes the maximum I/O count of the family, making it the choice when the application needs the widest peripheral fan-out. Typical applications include industrial automation controllers, IoT gateways, HMI panels, motor-control drives, and secure connected devices. The extended temperature rating and AEC-Q100 automotive qualification reported by distributors make it suitable for under-hood and industrial environments. When designing with this device, note that the -E/PH suffix denotes the extended-temperature 144-pin TQFP variant; the same die is available in 100-pin and 124-pin packages with reduced I/O. Verify the exact core clock (200 MHz datasheet maximum vs 180 MHz distributor listing) against the current Microchip datasheet before finalizing timing budgets. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for selection, replacement, and layout decisions.

USD $13,10 En stock
PIC32MZ1024EFM144-E/PL - 200MHz 32-Bit MCU 1MB Flash 144-LQFP | Microchip
PIC32MZ1024EFM144-E/PL

PIC32MZ1024EFM144-E/PL - 200MHz 32-Bit MCU 1MB Flash 144-LQFP | Microchip

The Microchip Technology PIC32MZ1024EFM144-E/PL is a high-performance 32-bit MIPS32 M-Class microcontroller running at up to 200 MHz (252 MHz for select EF family members), integrating 1 MB of Flash and 512 KB of SRAM in a 144-pin LQFP (20x20 mm) package with an exposed pad. It features the MIPS Warrior M-class core with DSP extensions, four 64-bit accumulators, single-cycle MAC, saturating and fractional math, and an IEEE 754-compliant hardware Floating Point Unit, delivering up to 330 DMIPS of computational throughput. The device includes an integrated Crypto engine for hardware-accelerated AES, DES, 3DES, SHA, MD5, and HMAC operations, dual-panel Flash for live firmware update support, and a 2 MB Flash ceiling within the family. A microcontroller (MCU) is a single-chip computer that integrates a processor core, non-volatile program memory, working RAM, and a rich set of on-chip peripherals. The PIC32MZ EF family extends this concept with high-speed connectivity peripherals (USB 2.0 High-Speed with PHY, dual Ethernet MAC with 1588 PTP, dual CAN-FD) and a wide peripheral mix (12-bit ADC at up to 18 MSPS, comparators, timers, PMP, EBI), positioning it at the top tier of industrial connectivity MCUs. From a system-hierarchy viewpoint, an MCU belongs to the broader family of embedded processors alongside microprocessors, DSPs, and SoCs. Key features of the PIC32MZ1024EFM144-E/PL include: 1 MB (1024 KB) Flash organized as dual-panel, 512 KB SRAM, integrated Crypto accelerator, Hi-Speed USB 2.0 with on-chip PHY, dual 10/100 Ethernet MACs with IEEE 1588 PTP, dual CAN 2.0B with CAN-FD support, up to 120 MHz peripheral bus, and a 144-pin LQFP package operating across the -40C to +125C extended industrial range (E suffix). The 200 MHz core delivers up to 3.13 CoreMark/MHz efficiency with the FPU. Typical applications include industrial automation gateways, automotive infotainment and HMI, Ethernet-connected IoT edge nodes, secure motor-control controllers, and graphics HMI panels. The integrated Crypto engine offloads TLS/DTLS handshake acceleration in connected appliances, while the dual Ethernet MACs support redundant industrial ring topologies. The dual-panel Flash enables A/B OTA-style firmware updates with rollback safety. When designing with this MCU, allocate the Vcap pins with low-ESR 4.7 uF ceramic capacitors as specified in Section 2 of the datasheet, place a ferrite bead on VDDCORE if using a switched-core supply, and respect the 5V-tolerant I/O mapping for the shaded pins in the pinout table. Boot time from POR is typically <2 ms; for deterministic startup use the BOR + RTCC combinations described in the family reference manual. This page synthesizes distributor pricing and stock data, drop-in replacement options drawn from the same PIC32MZ EF family, and application-specific design notes not consolidated on the manufacturer product page.

USD $9,55 En stock
PIC32MZ1024EFM144-I/JWX - 200MHz MIPS MCU 1MB Flash 144-TFBGA | Microchip
PIC32MZ1024EFM144-I/JWX

PIC32MZ1024EFM144-I/JWX - 200MHz MIPS MCU 1MB Flash 144-TFBGA | Microchip

The Microchip PIC32MZ1024EFM144-I/JWX is a 32-bit MIPS MCU in the popular PIC32MZ EF family offering 200 MHz CPU core, 1 MB Flash, 512 KB RAM, and integrated Crypto engine and CAN FD. It ships in a 144-pin TFBGA package measuring 7x7 mm and is targeted at industrial, IoT, graphics/HMI, and motor-control designs. A 32-bit microcontroller is a programmable embedded processor with on-chip memory and peripherals, sitting between low-end 8/16-bit MCUs and application processors in the embedded computing hierarchy. Microcontroller -> 32-bit MCU -> MIPS32 M-Class MCU -> PIC32 family -> PIC32MZ EF family. These parts typically integrate flash program memory, SRAM, timers, ADC, communication peripherals (UART, SPI, I2C, CAN, USB, Ethernet), and security/crypto accelerators to deliver a complete SoC for connected embedded systems. Key features of the PIC32MZ1024EFM144-I/JWX include a MIPS32 M-Class core with DSP/FPU extensions, 200 MHz maximum operating frequency, 1 MB dual-panel Flash (live update capable), 512 KB SRAM, hardware crypto engine (AES/SHA/RNG), dual CAN FD, USB 2.0 Hi-Speed, 10/100 Ethernet MAC with MII/RMII, 12-bit ADC, and integrated FPU for floating-point math. The 144-TFBGA package supports the highest pin count in the family, exposing parallel bus, trace, and abundant GPIO for HMI graphics. This MCU is built on a 65 nm embedded flash process and integrates ample analog peripherals including multiple 12-bit ADC modules, comparators, and a temperature sensor. The 200 MHz core achieves 3.84 CoreMark/MHz, and dedicated DSP extensions accelerate signal processing loops used in audio, motor control, and sensor fusion. Typical applications include industrial HMI panels, IoT gateways with secure cloud connectivity, automotive body and infotainment subsystems, motor-control FOC drives, and medical instrumentation with graphical user interface. The integrated crypto engine plus CAN FD make it well suited for connected industrial nodes requiring TLS/DTLS acceleration and robust in-vehicle networking. Designers should note that the I-grade variant operates from -40C to +85C and requires a 3.3 V supply. BGA routing demands HDI PCB with microvia stackups; reference the PIC32MZ EF Family data sheet for trace pin assignments and MII/RMII PHY connection diagrams. This page combines distributor pricing, drop-in same-family alternatives, and BGA layout design notes not found in the manufacturer summary page.

USD $9,45 En stock
PIC32MZ1024EFM144-I/PL - 200MHz 1MB Flash MCU w/ FPU | Microchip
PIC32MZ1024EFM144-I/PL

PIC32MZ1024EFM144-I/PL - 200MHz 1MB Flash MCU w/ FPU | Microchip

The Microchip Technology PIC32MZ1024EFM144-I/PL is a high-performance 32-bit MIPS microcontroller from the PIC32MZ EF family, featuring a MIPS Warrior M-class core running up to 200 MHz with 330 DMIPS, an integrated IEEE 754-compliant single-precision Floating Point Unit (FPU), and DSP-enhanced instructions including four 64-bit accumulators and single-cycle MAC. The device integrates 1 MB (1024 KB) of dual-panel Flash with live-update support and 512 KB of SRAM, and it is housed in a 144-pin LQFP package (20x20 mm) with extensive peripherals including USB-HS, Ethernet, CAN, multiple UART/SPI/I2C interfaces, and crypto acceleration hardware. A 32-bit microcontroller (MCU) is a microprocessor with on-chip Flash program memory, RAM, peripherals, and interrupt controllers integrated into a single IC. Within the broader taxonomy it sits under: microcontroller -> embedded MCU -> 32-bit MCU -> MIPS M-class MCU -> PIC32MZ EF family. The EF suffix designates variants with Floating Point Unit support, while the M (Memory) suffix indicates the family tier of Flash/RAM density. MCUs execute firmware from on-chip Flash and interface with sensors, actuators, displays, and connectivity transceivers in embedded products. Key specifications of the PIC32MZ1024EFM144-I/PL include 200 MHz maximum CPU speed with 330 DMIPS, 1 MB dual-panel Flash for live firmware updates, 512 KB SRAM, an integrated FPU for single-precision IEEE 754 math, hardware crypto engine, and integrated USB 2.0 High-Speed OTG plus 10/100 Ethernet MAC. The 144-pin LQFP package exposes dedicated PGECx/PGEDx pairs for In-Circuit Serial Programming (ICSP) and supports JTAG boundary-scan debugging via standard MIPS trace interfaces. The architecture combines a 5-stage MIPS pipeline with DSP extensions and dual-panel Flash - the latter enables live field firmware updates where one panel executes code while the other receives new code, then roles swap atomically with zero downtime. This is critical for industrial IoT gateways and connected appliances that cannot tolerate reboot windows during remote firmware rollouts. Typical applications include industrial IoT gateways with Ethernet and USB connectivity, automotive infotainment HMI controllers, graphics and HMI displays, motor control BLDC/PMSM drives, and secure connected devices benefiting from on-chip hardware encryption acceleration. The wide peripheral set reduces external component count in connected designs. When designing with this part, note that the 144-LQFP package requires careful PCB layout to maintain signal integrity on high-speed USB and Ethernet lines. The dual-panel Flash feature must be enabled through MPLAB Harmony configuration to leverage live update capability. This page synthesizes verified distributor pricing, drop-in alternatives from the same Microchip PIC32MZ EF family, and practical design notes - content not found in the manufacturer datasheet alone.

USD $7,92 En stock
PIC32MZ1024EFM144T-E/JWX - 180MHz 1MB Flash 32-bit MCU | Microchip
PIC32MZ1024EFM144T-E/JWX

PIC32MZ1024EFM144T-E/JWX - 180MHz 1MB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MZ1024EFM144T-E/JWX is a high-performance MIPS32 M-Class PIC32MZ microcontroller built around a 32-bit core running up to 180 MHz, integrating 1 MB of Flash and 512 KB of SRAM in a 144-pin TFBGA (7x7) package with 0.5 mm terminal pitch. The PIC32MZ EF family is engineered for connectivity-rich embedded designs and combines a Crypto engine, CAN, USB, and a rich peripheral set on a single die, targeting industrial, automotive, IoT, graphics/HMI, and motor-control end-markets. What is a PIC32MZ microcontroller? The PIC32MZ EF family is Microchip's high-end MIPS-based 32-bit MCU line - positioned in the hierarchy of microcontroller -> 32-bit MCU -> MIPS32 M-Class MCU -> PIC32MZ EF sub-family. These parts integrate a superscalar MIPS core, large volatile and non-volatile memory, dedicated crypto acceleration, and high-speed connectivity peripherals, replacing what used to require an MCU plus external memory and security ICs. The 'EF' suffix denotes the connectivity/FPU-enabled tier; the 'M' in EFM marks the specific pin/package variant group. Key features of the PIC32MZ1024EFM144T-E/JWX include 1 MB of on-chip Flash (1M x 8 organization), 512 KB SRAM, integrated Crypto engine supporting AES/DES/SHA, dual CAN 2.0b modules, USB 2.0 high-speed OTG, 10/100 Ethernet MAC, multiple UART/SPI/I/SHG interfaces, a 12-bit ADC/DVREF, and an integrated FPU/DSP for DSP-style workloads. The '-E' temperature grade covers -40C to +125C operation, suiting outdoor, industrial, and automotive under-hood environments. The 144-pin TFBGA footprint also delivers strong thermal dissipation thanks to the bottom-side balls acting as a thermal path. Architecturally the PIC32MZ EF core implements a superscalar pipeline with hardware multiply/divide, FPU, and DSP extensions - achieving up to 252 DMIPS in similar family members, with this specific -180 speed grade tuned for power/performance balance. The integrated Crypto engine accelerates AES-128/192/256, 3DES, MD5, SHA-1/2, and HMAC, offloading TLS/DTLS handshakes and secure-boot validation without consuming core cycles. Typical applications include industrial HMI with TFT-LCD and touch, IoT edge gateways with Ethernet, LAN and automotive body/CAN nodes, motor-control FOC drives, secure-connected medical peripherals, and graphics-rich point-of-sale terminals. The wide temperature range and Crypto engine make it well suited for field-deployed connected devices that must authenticate to cloud services. Design consideration: route the 144-pin TFBGA escape on inner microvia layers and allocate at least a 10x10 mm copper pour under the BGA to share thermal load; decoupling requires 0.1µF + 4.7µF ceramics within 3 mm of every VDD/VDDPLL pair. This page synthesizes distributor pricing, drop-in same-package alternatives, and design notes not bundled on the manufacturer product page.

USD $11,10 En stock
PIC32MZ1024EFM144T-I/JWX - 200MHz 1MB Flash 32-bit MCU | Microchip
PIC32MZ1024EFM144T-I/JWX

PIC32MZ1024EFM144T-I/JWX - 200MHz 1MB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MZ1024EFM144T-I/JWX is a high-performance 32-bit MIPS32 M-Class microcontroller running at 200 MHz, with 1 MB of Flash memory and 512 KB of SRAM in a 144-pin TFBGA (JWX) package measuring 7x7 mm. This PIC32MZ EF family part delivers up to 252 MHz (with speed grade variants) and integrates a Floating Point Unit (FPU) plus crypto accelerators, targeting connectivity, industrial, automotive, IoT, graphics/HMI, and motor control applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and peripherals. The PIC32MZ EF family belongs to the 32-bit MCU hierarchy, which sits above 16-bit MCUs and below 64-bit application processors in embedded computing taxonomy. Within Microchip's portfolio, the PIC32MZ EF line provides the highest performance among PIC32 microcontrollers, bridging the gap between traditional 8/16-bit PIC MCUs and full Linux-capable MPU processors. Key features of this part include: 1 MB (1M x 8) Flash program memory, 512 KB SRAM, hardware crypto engine for AES/SHA, integrated FPU for IEEE 754 single/double precision math, and rich connectivity peripherals including CAN, USB, Ethernet, multiple SPI/I2C/UART interfaces, plus a 12-bit ADC and analog comparators. The 144-pin TFBGA package supports up to 120 GPIO pins, enabling complex designs. The device uses a 5-stage MIPS32 M-Class pipeline with DSP extensions, achieving 3.28 CoreMark/MHz performance. Hardware crypto acceleration offloads AES-128/192/256, SHA-1/2, and true random number generation, allowing secure communication without CPU overhead. The integrated FPU handles floating-point math natively for HMI graphics rendering and motor control algorithms. Typical applications include: industrial control HMI with TFT LCD graphics, IoT edge gateways with Ethernet and USB, automotive body controllers with CAN bus, motor control drives (BLDC/PMSM) using FPU for field-oriented control, and secure connected sensors requiring hardware crypto. The PIC32MZ EF family's rich peripheral set makes it suitable for both standalone applications and as a companion processor. When designing with this MCU, plan memory layout carefully - 1 MB Flash is shared between code, data Flash, and EEPROM emulation. Use Microchip's Harmony 3 framework and MPLAB-X IDE for software development. The 144-pin TFBGA requires careful PCB layout with microvia technology due to the 0.5 mm pitch. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, providing engineers with a consolidated reference for component selection and sourcing decisions.

USD $8,50 En stock
PIC32MZ1024EFM144T-I/PH - 32-bit 200MHz MCU 1MB Flash | Microchip
PIC32MZ1024EFM144T-I/PH

PIC32MZ1024EFM144T-I/PH - 32-bit 200MHz MCU 1MB Flash | Microchip

The Microchip PIC32MZ1024EFM144T-I/PH is a high-performance 32-bit MIPS32 M-Class microcontroller running up to 200 MHz, integrating 1 MB of Flash and 512 KB of SRAM into a 144-pin TQFP (16x16 mm) industrial-temperature package. Built on the PIC32MZ EF family architecture, this Crypto-enabled variant adds hardware acceleration for AES, DES, 3DES, MD5, SHA-1, SHA-2, and HMAC, offloading cryptographic workloads from the CPU and shortening time-to-market for secure-connected designs. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a 32-bit CPU core, program and data memory, and a rich peripheral set around a shared system bus. PIC32 microcontrollers sit within the broader hierarchy: microcontroller -> embedded MCU -> 32-bit MCU -> MIPS-based MCU -> industrial / IoT / connected device silicon. The PIC32MZ EF family targets connectivity applications including industrial automation, automotive infotainment, IoT gateways, HMI/graphics, and motor control, sitting at the top of the Microchip 32-bit PIC portfolio alongside the PIC32MX and PIC32MM series. Key differentiating specifications include: a MIPS32 M-Class core with DSP instructions and double-precision FPU for signal-processing workloads; up to 200 MHz CPU clock with 16 KB I-cache and 16 KB D-cache for deterministic execution; high-speed USB 2.0 full-speed OTG plus 10/100 Ethernet MAC for connected designs; and a 12-bit ADC reaching 500 ksps for instrumentation-grade sensing. The integrated crypto engine accelerates AES (128/192/256-bit), SHA-1/2, and HMAC in hardware, enabling TLS-style secure boot and over-the-air update flows without taxing the CPU. Typical applications include industrial PLC I/O modules, EtherCAT/CAN-connected motor drives, IoT edge gateways with secure TLS endpoints, automotive infotainment HMI panels, and graphics-enabled HMI controllers. The 144-TQFP package exposes a wide peripheral count (six UART, four SPI, five I2C, CAN, EBI, PMP) so designers rarely need an external bus expander. When designing with this part, pay close attention to decoupling: place 100 nF X7R capacitors within 2 mm of every VDD/VSS pair, and bulk-decouple VDD with 4.7 uF plus 1 uF X5R ceramics. Trace the high-speed USB differential pair as a 90 ohm differential microstrip on the top layer over a continuous ground reference, and keep the 50 MHz crystal traces short and symmetric to meet USB jitter specifications.

USD $10,68 En stock
PIC32MZ1025DAA169-I/HF - 200MHz 1MB Flash 32-bit MCU | Microchip
PIC32MZ1025DAA169-I/HF

PIC32MZ1025DAA169-I/HF - 200MHz 1MB Flash 32-bit MCU | Microchip

The Microchip PIC32MZ1025DAA169-I/HF is a 200 MHz 32-bit MIPS microAptiv microcontroller from the PIC32MZ DA Graphics Family, integrating 1 MB of Flash, 256 KB SRAM, an integrated Graphics Controller with 2D GPU, and 169-pin LFBGA (11x11 mm) packaging. It is part of the secure MCU family designed for cost-sensitive graphical user interface applications, with secure boot and encrypted Flash options. The device operates from 2.3 V to 3.6 V and supports an extended industrial temperature range of -40 °C to +85 °C. A 32-bit microcontroller (MCU) is a microprocessor integrated with Flash program memory, SRAM data memory, and a rich peripheral set on a single die. PIC32MZ parts use the MIPS32 microAptiv core with hardware multiply-accumulate (MAC) and DSP extensions, enabling single-cycle 32-bit arithmetic. This category sits within the broader hierarchy of microcontrollers -> embedded processors -> semiconductors -> integrated circuits. The DA family adds an integrated 2D Graphics Processor Unit (GPU) and a parallel camera/video interface, addressing the gap between traditional MCUs and higher-cost MPUs for embedded GUI workloads. Key differentiating features include the integrated 2D Graphics Processing Unit (GPU) supporting JPEG, PNG, H.264 decode, and the 32 MB or 128 MB DDR2 DRAM controller (external). The 169-pin LFBGA exposes up to five flexible peripheral pin-select (PPS) I/O banks, 12-bit ADC at 500 ksps, USB 2.0 high-speed OTG, two CAN 2.0b controllers, and 10/100 Ethernet MAC with IEEE 1588 PTP. The DA family provides qualified secure-boot libraries, encrypted Flash read, and a true RNG for IEC 62443 / IEC 61508 SIL2 / SIL3 ready designs. Typical applications include automotive instrument clusters, smart-HMI thermostats, EV chargers, security/alarm panels with GUI, medical pumps with colour touchscreens, industrial control HMIs, and point-of-sale terminals. The integrated 2D GPU removes the need for an external graphics controller in most mid-resolution (WVGA to 720p) displays. Use the part with Microchip's MPLAB Harmony 3 (MHC) framework, which ships board-support packages for both bare-metal and FreeRTOS configurations. Pair with a 32 MB DDR2 for full HMI workloads, or skip DRAM for simpler QR-code-only UIs. Avoid routing high-speed traces across the LFBGA beneath the die shadow without stitching vias in the breakout region. This page synthesises DigiKey distributor pricing, Microchip PIC32MZ DA family datasheet specifications, drop-in alternatives, and practical design notes that are not consolidated into the manufacturer product page.

USD $7,30 En stock
PIC32MZ1025DAA176T-I/2J - 200MHz 1MB Flash 32-bit MCU | Microchip
PIC32MZ1025DAA176T-I/2J

PIC32MZ1025DAA176T-I/2J - 200MHz 1MB Flash 32-bit MCU | Microchip

The Microchip PIC32MZ1025DAA176T-I/2J is a high-performance 32-bit MIPS32 microAptiv microcontroller from the PIC32MZ DA family, featuring a 200 MHz core, 1 MB Flash, and integrated Graphics Controller for GUI-driven embedded designs. It is housed in a 176-pin LQFP (20x20 mm) package with an exposed thermal pad, supporting the PIC32MZ DA family's signature combination of MCU ease-of-design with MPU-class peripherals. Key features include 1 MB of on-chip Flash, 256 KB SRAM (with options for external DDR2 DRAM expansion on related DA family members), integrated Graphics Processing Unit (GPU), integrated Graphics Controller for direct LCD driving, USB 2.0 High-Speed with on-chip PHY, dual CAN 2.0b interfaces, and a 12-bit 18 MSPS ADC with up to 45 analog inputs. The 200 MHz MIPS32 microAptiv core delivers up to 252 DMIPS, while rich connectivity options include Ethernet, SQI, SPI, I2C, and UART. A PIC32MZ DA microcontroller is a member of the broader 32-bit MCU category, sitting at the high-performance end of the PIC32 family. It is engineered for applications that demand both substantial computational headroom and rich peripheral integration without moving to a discrete MPU. Within the embedded hierarchy, a PIC32MZ DA device is best understood as: 32-bit microcontroller -> PIC32 family -> PIC32MZ DA sub-family -> graphics-oriented MPU-like MCU. Typical applications include industrial HMI panels, automotive dashboards, medical patient-monitoring displays, home appliances with graphical user interfaces, and building-automation control panels. The combination of integrated display-driving, USB High-Speed, and CAN makes the part especially well-suited to systems that must simultaneously drive a TFT LCD and communicate with industrial or vehicle networks. When designing with the PIC32MZ1025DAA176T-I/2J, follow Microchip's recommended decoupling scheme (typically 0.1 uF + bulk capacitors placed close to each power pin) and ensure adequate PCB copper for the exposed thermal pad to dissipate up to ~1 W of internal dissipation under heavy CPU/GPU load.

USD $7,62 En stock
PIC32MZ1025DAB169-I/HF - 200MHz 32-bit MCU | Microchip
PIC32MZ1025DAB169-I/HF

PIC32MZ1025DAB169-I/HF - 200MHz 32-bit MCU | Microchip

The Microchip Technology PIC32MZ1025DAB169-I/HF is a 32-bit MIPS32 microAptiv graphics microcontroller from the PIC32MZ DA family, operating at up to 200 MHz with 1 MB of Flash program memory and 256 KB of SRAM, housed in a 169-ball LFBGA (11x11 mm) package. The device integrates a hardware graphics controller and graphics processor, on-chip DDR2 DRAM controller, 12-bit 18 MSPS ADC with up to 45 analog inputs, HS USB, and CAN, providing MPU-class graphics performance within an MCU footprint for GUI-centric embedded designs. An MCU (microcontroller) is a single-chip computer integrating a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals (ADC, timers, communication controllers). The PIC32MZ DA family specifically targets graphical HMI applications, combining high-throughput CPU performance with a dedicated graphics pipeline and an external DDR2 memory interface that allows frame buffers large enough for rich LVDS or TFT panels. Within the broader taxonomy, this device sits in the hierarchy: 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. Key features include 1 MB (1M x 8) Flash, 256 KB RAM, 120 I/O pins, an integrated DDR2 controller supporting up to 128 MB externally addressable DRAM, a 12-bit 18 MSPS ADC, a hardware graphics controller and GPU accelerator, HS USB 2.0, CAN 2.0, and an operating voltage range of 1.7 V to 3.6 V. The 200 MHz core delivers up to 330 DMIPS / 3.3 CoreMarks, while the graphics peripherals accelerate 2D rendering and color-space conversion in hardware, offloading work from the CPU. The PIC32MZ1025DAB169-I/HF uses a 5-stage pipeline MIPS32 microAptiv core with single-cycle hardware multiply and a 4-way set-associative instruction cache. The integrated DDR2 controller with 32-bit bus supports modern low-cost external DRAM, allowing full-screen frame buffers at WXGA resolution. An integrated Crypto engine (note the 'B' suffix) provides secure boot and hardware AES/TDES/SHA support for tamper-resistant designs. Typical applications include industrial HMI panels with TFT/LVDS displays, automotive infotainment clusters, point-of-sale terminals, medical patient monitors, and IoT gateways with graphical touchscreens. The wide I/O count and integrated graphics pipeline make it ideal for any GUI application that previously required an MPU plus external controller. When designing with this part, plan DDR2 PCB routing carefully - matched-length traces and proper impedance are required for stable operation. The Crypto engine requires initial configuration via the bootloader; software libraries from Microchip (MPLAB Harmony) abstract most of this complexity. This page synthesizes distributor pricing, drop-in alternative listings, and design notes not found in the bare manufacturer datasheet.

USD $7,85 En stock
PIC32MZ1025DAB169T-I/HF - 32-bit 200MHz MCU, 1MB Flash, 169-LFBGA | Microchip
PIC32MZ1025DAB169T-I/HF

PIC32MZ1025DAB169T-I/HF - 32-bit 200MHz MCU, 1MB Flash, 169-LFBGA | Microchip

The Microchip Technology PIC32MZ1025DAB169T-I/HF is a high-performance 32-bit MIPS32 microAptiv PIC32MZ DA microcontroller running 1 MB of on-chip Flash, integrated graphics controller and graphics processor, 12-bit 18 MSPS ADC with up to 45 analog inputs, CAN-FD, and High-Speed USB, housed in a 169-pin LFBGA (11x11 mm) package with industrial -40C to +85C temperature grade. The DAB family targets graphical HMI and display applications with MPU-class throughput at MCU ease-of-design. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory (Flash), data memory (SRAM), and a wide set of on-chip peripherals. The PIC32MZ DA family extends this concept with an integrated 2D Graphics Processing Unit (GPU), dedicated graphics controller with TFT timing generator, and on-chip 32 MB or externally addressable 128 MB DDR2 DRAM interface. This positioning places it between traditional microcontrollers and application processors: it is a true MCU with deterministic interrupt handling, yet it offers graphics and DDR2 features normally found in microprocessors (MPUs). Key differentiating specifications include the MIPS32 microAptiv core running up to 200 MHz (with on-chip FPU double duty as IEEE 754 hardware), 1 MB of Flash with 640 KB SRAM, 12-bit 18 MSPS ADC delivering up to 45 analog input channels, and High-Speed USB plus CAN-FD connectivity. The graphics subsystem supports TFT displays up to WVGA resolution, and DDR2 DRAM supply accommodates large framebuffers. The PIC32MZ1025DAB169T-I/HF is built on a 65 nm process and uses a 5-layer internal AHB/APB bus matrix. Designers can take advantage of Microchip's MPLAB Harmony ecosystem, which provides pre-validated graphics libraries, USB stacks, and FreeRTOS-aware middleware. Pin assignment follows Microchip's PIC32MZ DA standard 169-LFBGA footprint shared across the family, simplifying design reuse. Typical applications include industrial graphical HMI panels, medical patient monitors, automotive instrument clusters, smart-home control displays, and point-of-sale terminals. The combination of TFT imaging support and CAN-FD automotive bus connectivity makes the device well suited for body electronics clusters and aftermarket infotainment. When designing with this part, plan PCB layout carefully for the 11x11 mm BGA footprint: route DDR2 traces with matched length and 100 ohm differential impedance, place 0.1 uF decoupling on each VDD/VBAT pin, and observe the 1.8V/3.3V supply pair requirement for DDR2 I/O and core logic respectively. This page synthesizes distributor pricing, drop-in alternatives within the PIC32MZ DA family, and practical design notes not found in the manufacturer datasheet summary alone, helping engineers evaluate this part quickly for new GUI designs.

USD $12,65 En stock
PIC32MZ1025DAB176T-I/2J - 200MHz 32-Bit MCU, 1MB Flash, Graphics LCD | Microchip
PIC32MZ1025DAB176T-I/2J

PIC32MZ1025DAB176T-I/2J - 200MHz 32-Bit MCU, 1MB Flash, Graphics LCD | Microchip

The Microchip Technology PIC32MZ1025DAB176T-I/2J is a high-performance 32-bit MIPS microcontroller from the PIC32MZ DA family, featuring a 200 MHz MIPS32 microAptiv core with 1 MB of Flash and 256 KB of SRAM in a 176-pin LQFP (20x20 mm) package with exposed pad. It integrates an integrated Graphics Controller and Graphics Processor, providing MPU-like performance with MCU ease-of-use for advanced graphical user interface designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one die. The PIC32MZ DA series belongs to the application-specific MCU class, targeting Human-Machine Interface (HMI) and embedded graphics applications. Within the broader taxonomy, an MCU falls under microcontrollers (ICs) -> semiconductors -> integrated circuits. The 32-bit MIPS32 microAptiv core delivers 3.28 CoreMarks/MHz and supports DSP instructions for signal conditioning alongside RTOS workloads. Key differentiating specifications include a 12-bit 18 MSPS ADC module with up to 45 analog inputs, dual CAN 2.0b controllers, Hi-Speed USB 2.0 (480 Mbps) with integrated PHY, and external DDR2 DRAM addressing up to 32 MB or 128 MB depending on variant. The integrated Graphics LCD controller supports resolutions up to WVGA (800x480) without external graphics RAM, while 120 GPIO pins provide generous connectivity for display, touch, and communication peripherals. The architecture pairs a 5-stage pipeline MIPS32 microAptiv core with hardware multiply/divide and a dedicated Graphics Processor Unit for 2D operations. An 8-channel hardware DMA engine offloads memory transfers, and the 200 MHz system clock provides 3.28 DMIPS/MHz headroom for control loops. The DDR2 interface (when externally populated) enables frame buffer storage for high-resolution GUIs. Typical applications include industrial HMI panels with touchscreens, automotive infotainment and cluster displays, medical patient-monitoring displays, point-of-sale terminals, and IoT gateways with graphical diagnostics. The integrated graphics pipeline removes the need for an external GPU, reducing BOM cost and PCB area for color TFT designs. Design considerations include careful DDR2 PCB layout (matched impedance, length-matched traces), provision for an external 32.768 kHz crystal for RTCC, and proper decoupling of the 3.3 V core supply with bulk and ceramic capacitors. The exposed thermal pad must be soldered to a sufficient copper pour to dissipate power and provide mechanical stability. This page synthesizes verified distributor pricing across DigiKey, Mouser, and Octopart, packages drop-in 176-LQFP alternatives from the same PIC32MZ DA family, and presents design notes not found in the manufacturer datasheet - including cross-brand evaluation criteria for engineers considering STM32 or NXP i.MX alternatives.

USD $21,75 En stock