Microcontroladores

Productos (18177)

S912XET256J2MAGR - 16-bit S12X MCU, 256KB Flash, 50MHz | NXP
S912XET256J2MAGR

S912XET256J2MAGR - 16-bit S12X MCU, 256KB Flash, 50MHz | NXP

The NXP S912XET256J2MAGR is a 16-bit HCS12X microcontroller featuring a 50 MHz CPU core, 256 KB of embedded Flash, and automotive-grade qualification, supplied in a 144-pin LQFP package. Designed for body, chassis, and powertrain applications, it integrates XGATE co-processing, multi-master communication peripherals, and an extended temperature rating of -40C to +125C for harsh in-vehicle environments. The S912XET256J2MAGR is shipping in active production per the NXP product page as of 2026-10-19. A 16-bit MCU (microcontroller unit) is a single-chip computer that integrates a CPU, Flash program memory, SRAM data memory, and a peripheral set around a 16-bit data path. The S12X family specifically extends the classic S12 core with the XGATE auxiliary peripheral processor and a 32-bit ALU, allowing the S912XET256J2MAGR to handle complex real-time control loops that previously required a separate DSP. Within the wider taxonomy, MCUs sit at the foundation of embedded systems, alongside microprocessors, FPGAs, and DSPs. The device runs from a 3.13 V to 5.5 V supply, offers 16 KB of RAM, and includes CAN, SPI, SCI, and IIC interfaces alongside up to 91 GPIO pins. Compatibility with the legacy 9S12 instruction set and an integrated background-debug-mode interface simplify migration paths from earlier S12 designs, preserving firmware and JTAG tool investments. For automotive deployments, the device provides ECC-protected Flash and on-chip voltage regulation. It is frequently used alongside companion S12X transceivers and CAN physical-layer drivers such as the TJA1057 to form complete in-vehicle networking nodes. The 144-pin LQFP footprint also provides ample headroom for adding motor drivers or sensor interfaces on the outer ring. Engineers should evaluate the XGATE interrupt vector map and shared-RAM arbitration rules before porting code from older 9S12 designs. Programming and debug are supported by NXP's CodeWarrior and P&E Micro BDM tools. Total height including the lead footprint must be checked against enclosure constraints in under-dash modules.

USD $10,65 En stock
S912XET256J2MAL - 16-bit 50MHz 256KB MCU | NXP | Automotive
S912XET256J2MAL

S912XET256J2MAL - 16-bit 50MHz 256KB MCU | NXP | Automotive

The NXP Semiconductors S912XET256J2MAL is a 16-bit HCS12X automotive microcontroller with 256KB Flash, 16KB RAM, and a 50MHz S12X CPU bus speed, housed in a 112-pin LQFP (20x20 mm) package qualified to AEC-Q100 for -40C to +125C operation. A microcontroller (MCU) is a single integrated circuit that combines a processor core, program memory, data memory, and peripherals such as timers, ADCs, and communication interfaces on one die. Within the semiconductor hierarchy, the S912XET256J2MAL sits in the 16-bit microcontroller class, part of the HCS12X (S12XE) family descended from the industry-proven HCS12 architecture, widely used in body electronics, instrumentation, and industrial control where deterministic single-cycle-equivalent execution and 5V I/O tolerance remain design requirements. Key differentiating features include the XGATE co-processor, a programmable RISC peripheral processor that offloads interrupt handling and I/O tasks from the main CPU, effectively building virtual peripherals and boosting overall system throughput. The device also provides flexible, programmable hardware-emulated EEPROM for calibration and non-volatile storage without an external memory, and a memory protection unit with supervisor/user modes for system integrity. On the analog side, the integrated ADC delivers 12-bit resolution with a 3 microsecond conversion time, while the peripheral set includes an enhanced capture timer (ECT), periodic interrupt timer (PIT), and real-time interrupt (RTI). Standard serial modules on the S12XE family support CAN, SCI, and SPI connectivity for in-vehicle networks. Typical applications include automotive body control modules, instrument clusters, HVAC controllers, gateway nodes, and industrial machinery requiring an AEC-Q100 qualified, 5V-tolerant MCU with deterministic response. When designing with this device, plan Flash and RAM sizing against the 256KB/16KB budget - if code growth is expected, the pin-compatible 384KB and 512KB S12XE variants allow a drop-in upgrade. This page synthesizes distributor pricing, drop-in alternatives within the S12XE family, and practical design notes not found in a single manufacturer datasheet.

USD $13,10 En stock
S912XET256J2VAA - 16-bit S12X MCU, 256KB Flash, 50MHz | NXP
S912XET256J2VAA

S912XET256J2VAA - 16-bit S12X MCU, 256KB Flash, 50MHz | NXP

The NXP Semiconductors S912XET256J2VAA is a 16-bit HCS12X microcontroller built around the S12X CPU core, integrating 256 KB of on-chip Flash, an XGATE co-processor, and an S12X peripheral set in an 80-pin QFP (PQFP, 14x14 mm) package. It operates up to 50 MHz bus speed across a 1.8 V / 2.8 V / 5 V supply range and is qualified to -40 / +105 °C automotive temperature grade, making it suitable for under-hood and industrial safety-critical applications. What is an S12X microcontroller? The S12X is a 16-bit RISC-derived microcontroller architecture from NXP (originally Freescale) targeting automotive body, chassis, and powertrain applications. It extends the classic HCS12 core with a peripheral co-processor called XGATE, which offloads interrupt-driven tasks and emulated EEPROM operations from the main CPU. Within the broader taxonomy, S912XET256J2VAA belongs to: microcontroller -> automotive microcontroller -> S12X family -> S12XE series -> 80-QFP QFP packaging class. Key features include the XGATE co-processor for virtual peripheral acceleration, hardware-emulated EEPROM with flexible programmability, a memory protection unit (MPU) supporting supervisor/user modes for system integrity, a 12-bit ADC with 3 µs conversion time, an enhanced capture timer (ECT), periodic interrupt timer (PIT), and a real-time interrupt (RTI). These blocks enable efficient CAN/LIN body-network nodes, motor control loops, and sensor-fusion front-ends. The S12X architecture combines a CPU12X core running up to 50 MHz with an XGATE RISC co-processor clocked at 2x bus rate, allowing deterministic interrupt response for serial communication and PWM generation. The 256 KB Flash supports in-application reprogramming, while the hardware-emulated EEPROM eliminates external memory for parameter storage, lowering BOM cost and PCB complexity in automotive ECUs. Typical applications include automotive body control modules, CAN/LIN gateway nodes, powertrain sensors, HVAC actuators, instrument clusters, and industrial automation controllers. The wide operating voltage and temperature range also supports white-goods motor control and renewable-energy inverter peripherals. When designing with this device, allocate sufficient decoupling (100 nF + 4.7 µF) near each VDD pair and follow NXP's AN2720 PCB layout recommendations to keep EMI below automotive CISPR 25 limits. The XGATE firmware should be validated against worst-case interrupt latency budgets specified in the S12X reference manual. This page synthesizes distributor pricing, drop-in alternatives from the S12XE family, and practical design notes not consolidated in the manufacturer datasheet.

USD $7,40 En stock
S912XET256J2VAG - 16-bit 50MHz 256KB Flash MCU | NXP
S912XET256J2VAG

S912XET256J2VAG - 16-bit 50MHz 256KB Flash MCU | NXP

The NXP Semiconductors S912XET256J2VAG is a 16-bit HCS12X microcontroller with a 50 MHz S12X core, 256KB (256K x 8) FLASH, and 16KB RAM, housed in a 144-pin LQFP (20x20 mm) package. It is automotive qualified and rated for operation from -40C to +105C. A microcontroller (MCU) is a single integrated circuit that combines a processor core, program memory, data memory, and peripherals into one chip, forming the complete brain of an embedded system. Within the microcontroller hierarchy, the S912XET256J2VAG belongs to the 16-bit class of embedded microcontrollers, positioned above 8-bit MCUs in arithmetic throughput while remaining simpler than 32-bit application processors. The HCS12X family, originally developed by Freescale Semiconductor and now part of NXP, is a long-lived architecture widely used in body electronics, chassis, and industrial control platforms. Key differentiating features include the XGATE co-processor, a configurable RISC-style coprocessor that offloads interrupt handling, communication stacks, and I/O tasks from the main S12X CPU, effectively boosting overall system throughput and enabling virtual peripheral implementations. The device also provides flexible, programmable hardware-emulated EEPROM, allowing designers to size nonvolatile data storage in software rather than dedicating fixed EEPROM silicon. From a system-integrity perspective, the S912XET256J2VAG incorporates a memory protection unit (MPU) together with supervisor and user operating modes, which support layered software architectures and protect critical code from faults in less-trusted routines. This is an important safety and robustness consideration in automotive body and gateway modules. The 256KB FLASH array is programmed in-system, supporting field updates. Typical applications include automotive body control modules, door and seat control units, instrument clusters, HVAC controllers, and industrial control nodes where a 5V-tolerant 16-bit MCU with rich timers and communication interfaces is preferred. According to the Mouser listing, the part is described as a 16-bit MCU with S12X core, 256KB Flash, 50MHz, -40/+105degC, automotive qualified, in QFP 144. When designing with this device, verify flash and RAM sizing against code growth over the product lifetime; the 256KB/16KB partition suits mid-size applications, and XGATE code shares system resources, so budget XGATE RAM usage explicitly during architecture definition. This page synthesizes distributor pricing context, drop-in alternatives, applications, and practical design notes not found in the manufacturer datasheet, providing engineers with a single citable reference for the S912XET256J2VAG.

Cotización En stock
S912XET256W1CAL - 16-Bit 50MHz 256KB MCU | NXP
S912XET256W1CAL

S912XET256W1CAL - 16-Bit 50MHz 256KB MCU | NXP

The NXP Semiconductors S912XET256W1CAL is a 16-bit S12X microcontroller with a 50 MHz bus, 256 KB of Flash, and a 112-pin LQFP package measuring 20 mm by 20 mm. It is specified for industrial temperature operation from -40 °C to +85 °C and is identified by the verified product data as automotive qualified. The device belongs to the HCS12X family and combines an embedded MCU core with automotive-oriented integration and memory-protection capabilities. A microcontroller is a programmable semiconductor that integrates a CPU core, Flash program memory, data memory, peripherals, and interface logic into one device. The S12X MCU family is used when a design requires deterministic control, extensive peripheral integration, and a compact single-chip implementation. Its instruction set and bus architecture are intended for embedded control rather than general-purpose computing, making the device suitable for automotive electronics, industrial controllers, and communication modules. The verified S912XET256W1CAL information identifies a 16-bit CPU operating at 50 MHz, 256 KB Flash organized as 256K x 8, and a 112-LQFP package. The S12X XGATE coprocessor assists virtual-peripheral development and can improve execution throughput for interrupt-driven and signal-processing workloads. The device also includes a memory protection unit, supervisor and user modes, a 12-bit ADC with a stated 3 microsecond conversion time, an enhanced capture timer, periodic interrupt timer, and real-time interrupt timer. Programmable hardware-emulated EEPROM supports designs that require rewriteable nonvolatile data without assigning a separate external EEPROM. The HCS12X architecture is appropriate for applications needing deterministic interrupt response and broad on-chip integration. Its 256 KB Flash provides room for boot code, application logic, calibration tables, and diagnostics, while the XGATE coprocessor can handle time-critical background tasks. The 12-bit ADC and timer resources reduce the need for separate analog and timing components. The memory protection unit and supervisor/user mode features support controlled software execution and system integrity. Typical applications include automotive body and chassis control modules, industrial automation controllers, sensor-conditioning equipment, motor-control support circuits, communication gateways, and embedded instrumentation. The verified source data identifies the device as automotive qualified, while the listed -40 °C to +85 °C range covers industrial temperature conditions. Exact peripheral availability, pin multiplexing, memory organization, and electrical limits must be confirmed against the NXP datasheet for the specific design. When planning a PCB, reserve all 112 LQFP pins and confirm the pin multiplexing requirements before assigning analog, communication, timer, debug, and power functions. Place decoupling and support components close to their associated supply pins, route sensitive analog signals away from fast digital edges, and validate the external clock, reset, programming, and communication interfaces against the manufacturer reference design. The 20 mm by 20 mm LQFP is a relatively large fine-pitch package, so assembly capability and thermal performance should be checked early. This page combines the verified NXP and distributor product information with an explicit distinction between confirmed specifications and design information that still requires datasheet review. It also records the package, temperature range, qualification claim, Flash capacity, CPU speed, and available alternative information so that engineers can assess fit before beginning schematic capture.

Cotización En stock
S912XET256W1MAGR - 16-Bit 50MHz 256KB Flash S12X MCU | NXP
S912XET256W1MAGR

S912XET256W1MAGR - 16-Bit 50MHz 256KB Flash S12X MCU | NXP

The NXP S912XET256W1MAGR is a 16-bit HCS12X microcontroller from the S12XE family featuring 256KB of Flash memory, 50MHz CPU core speed, and is housed in a 144-pin LQFP (20x20 mm) package with matte tin lead finish. It is qualified to the automotive temperature grade (-40C to +125C) and targets automotive body, chassis, and powertrain applications where deterministic 16-bit performance and large on-chip Flash are required. What is a 16-bit MCU? A microcontroller (MCU) is an integrated circuit that combines a CPU core, memory (Flash for program storage, RAM for data), and a rich set of peripherals (timers, ADCs, communication interfaces such as CAN, SCI, SPI, I2C) on a single die. The "16-bit" descriptor refers to the CPU datapath width, which influences computational throughput per instruction cycle. The S12X core is NXP's enhanced 16-bit architecture with a co-processor (XGATE) that offloads interrupt-driven tasks, lifting main CPU efficiency for real-time control. Key features include 256KB on-chip Flash, 16KB (typical) on-chip SRAM (per family datasheet), 8/16-bit PWM modules, up to 3x MSCAN (CAN 2.0B) modules, up to 2x SCI, up to 3x SPI, one I2C, a 12-bit ADC (typically 16 channels on this family), and a periodic interrupt timer. The 144-pin LQFP package (20x20 mm body, 0.5 mm pitch) exposes a wide GPIO count and parallel expansion bus for external memory or peripheral expansion. The S912XE architecture integrates an XGATE co-processor running at twice the bus clock, enabling deterministic peripheral servicing without burdening the main S12X core. The Flash is ECC-protected, and the device supports background debug mode (BDM) and on-chip single-wire debug, simplifying in-circuit programming and calibration. Typical applications include automotive body control modules, HVAC controls, instrument clusters, lighting controllers, and CAN-based sensor nodes. The 50MHz core with hardware multiply/divide accelerates motor-control math and CAN message filtering without external DSP assistance. When designing with this MCU, allocate careful attention to the 5V-tolerant I/O bank plan and CAN bus termination. Use BDM for production flash programming to avoid IO contention with application firmware. Always verify the latest NXP errata sheet (S12XE family) before committing to high-volume designs.

USD $9,05 En stock
S912XET512BMAGR - 16-bit 50MHz 512KB Flash MCU | NXP
S912XET512BMAGR

S912XET512BMAGR - 16-bit 50MHz 512KB Flash MCU | NXP

The NXP S912XET512BMAGR is an automotive-qualified 16-bit microcontroller IC based on the HCS12X (S12X) core, running at up to 50 MHz bus speed with 512KB (512K x 8) of on-chip FLASH program memory, supplied in a 144-pin LQFP (20 x 20 mm) gull-wing surface-mount package and rated for -40C to +125C operation. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory (FLASH, RAM, EEPROM emulation), and peripherals such as timers, ADCs, and communication interfaces into one chip. In the broader system hierarchy, an MCU sits at the heart of an embedded system, spanning the taxonomy from microcontroller to embedded processor to semiconductor device. The 16-bit S12X family from NXP is a long-standing workhorse of automotive and industrial body electronics, where deterministic single-cycle performance, mature tooling, and automotive qualification matter more than raw processing throughput. Key features of the S912XET512BMAGR include the XGATE co-processor, which offloads interrupt-driven and communication tasks to build virtual peripherals and boost overall system performance; a flexible, programmable, hardware-emulated EEPROM for parameter storage without external memory; and a memory protection unit with supervisor/user modes for system integrity. The integrated 12-bit ADC achieves 3 us conversion time, enabling fast, precise analog acquisition. Technical depth: the S12X CPU executes at 50 MHz bus speed with enhanced capture timer (ECT), periodic interrupt timer (PIT), and real-time interrupt (RTI) modules for deterministic timing. The XGATE RISC co-processor runs independently, letting designers service CAN/LIN frames or manage I/O without burdening the main core. The 512KB FLASH provides ample code space for layered automotive software stacks. Typical applications include automotive body control modules, instrument clusters, gateways, HVAC controllers, and industrial control systems requiring an AEC-qualified 16-bit MCU with rich timers and a fast ADC. Design consideration: the LQFP-144 20x20 mm body requires careful PCB footprint planning and adequate ground/via stitching for analog performance; verify supply sequencing and JTAG/BDM access in early layouts. This page synthesizes distributor pricing, drop-in alternatives, comparison tables, and practical design notes not found in the manufacturer datasheet, with pricing and stock verified as of 2026-10-18.

USD $6,60 En stock
S912XET512J2VAGR - 16-bit S12X MCU 512KB 50MHz | NXP
S912XET512J2VAGR

S912XET512J2VAGR - 16-bit S12X MCU 512KB 50MHz | NXP

The NXP Semiconductors S912XET512J2VAGR (Freescale Semiconductor) is a 16-bit HCS12X automotive-qualified microcontroller with 512KB Flash, 50MHz bus operation, and a -40C to +105C temperature range, housed in a 144-pin LQFP (LFQFP) 20x20 mm square package with gull-wing terminals. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals into one chip, forming the lowest tier of the embedded processing hierarchy: MCU -> embedded processor -> microprocessor -> system-on-chip. The HCS12X family extends the industry-proven S12 architecture with an enhanced XGATE co-processor module that offloads interrupt servicing and communication tasks from the main S12X core, increasing effective throughput for body, chassis, and industrial control workloads. Key features of the S912XET512J2VAGR include 512KB (512K x 8) of on-chip Flash program memory, 16-bit S12X CPU core clocked at 50MHz, serial interfaces including SPI and SCI for peripheral connectivity, a watchdog timer and oscillator/timer blocks for robust system supervision, and industrial/automotive grade temperature qualification to +105C. The 144-terminal LQFP provides a high I/O count suitable for motor control, networking gateways, and multi-peripheral system designs. The S12X architecture preserves upward compatibility from the classic S12/HCS12 family, allowing reuse of proven firmware while gaining the XGATE peripheral co-processor and extended addressing. The device integrates voltage regulation, clock generation, and multiple timer channels, reducing external component count and bill-of-material cost in body electronics and industrial automation nodes. Typical applications include automotive body control modules, instrument clusters, HVAC controllers, gateway nodes on CAN/LIN networks, industrial motor control, and building automation systems where 16-bit processing depth and high Flash density are required without the cost of a 32-bit device. When designing with this MCU, budget Flash for bootloader plus application and verify that the +105C junction condition is respected in high ambient enclosures; consider the J3 temperature grade variant if higher ambient temperatures are expected. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet, giving procurement and engineering teams a single citable reference.

USD $1,00 En stock
S912XET512J3MAG - 16-Bit 50MHz 512KB Flash MCU | NXP (Tape & Reel)
S912XET512J3MAG

S912XET512J3MAG - 16-Bit 50MHz 512KB Flash MCU | NXP (Tape & Reel)

The NXP S912XET512J3MAG is a 16-bit HCS12X family microcontroller running at 50 MHz bus speed with 512 KB of on-chip Flash memory and an integrated XGATE co-processor, housed in a 144-pin LQFP package (20x20 mm) for automotive temperature grade (-40C to +125C). It combines a 16-bit S12X CPU core, hardware-emulated EEPROM via Flash partitioning, 12-bit ADC with 3 microsecond conversion time, Enhanced Capture Timer (ECT), Periodic Interrupt Timer (PIT), and a Real-Time Interrupt (RTI) module, providing a complete mixed-signal control platform for body and chassis applications. The HCS12X is a high-performance 16-bit microcontroller architecture that doubles internal data paths to 32 bits in selected operations while retaining the established S12 instruction set and tool chain. The XGATE auxiliary processor offloads interrupt servicing and peripheral data movement, allowing the main CPU to focus on application logic and reducing average interrupt latency by up to 50% compared with single-core S12 devices. This dual-processor approach delivers 32-bit-class performance with the deterministic response and code density of a 16-bit controller, fitting squarely within the broader category of automotive microcontrollers and embedded MCU ICs. Key features include 512 KB program Flash, 32 KB RAM, 4 KB EEPROM emulation area, CAN, SPI, SCI, I2C peripherals, plus a memory protection unit with supervisor/user modes for system integrity. The 12-bit ADC supports up to 24 channels with sequential scan capability, while the ECT delivers input capture, output compare, and pulse-width modulation functions. Multiple PWM channels and timer resources support motor control and switch-mode power conversion. Typical applications include automotive body controllers, instrument clusters, HVAC control modules, seat and mirror controllers, industrial sensor hubs, and CAN-based distributed control nodes. The wide operating temperature range and AEC-Q100 qualification make this device suitable for under-hood and chassis environments where reliability under thermal stress is mandatory. When designing with this device, ensure adequate decoupling on the 5V analog supply pins (VDDA/VSSA), route the CAN bus through a high-speed transceiver, and connect the BKGD pin to a secure debug header. The 144-pin LQFP provides ample I/O for mid-complexity body and chassis systems without requiring BGA routing complexity. This page synthesizes NXP manufacturer specifications, distributor pricing, drop-in same-family alternatives, and PCB layout guidance not found in the datasheet summary, giving procurement and design engineers a single decision-ready reference.

USD $16,40 En stock
S912XET512J3MAGR - 16-Bit 50MHz 512KB Flash MCU | NXP
S912XET512J3MAGR

S912XET512J3MAGR - 16-Bit 50MHz 512KB Flash MCU | NXP

The NXP S912XET512J3MAGR is a 16-bit HCS12X family microcontroller running at 50 MHz bus speed with 512 KB of on-chip Flash memory and an integrated XGATE co-processor, housed in a 144-pin LQFP package (20x20 mm) for automotive temperature grade (-40C to +125C). It combines a 16-bit S12X CPU core, hardware-emulated EEPROM via Flash partitioning, 12-bit ADC with 3 microsecond conversion time, Enhanced Capture Timer (ECT), Periodic Interrupt Timer (PIT), and a Real-Time Interrupt (RTI) module, providing a complete mixed-signal control platform for body and chassis applications. The HCS12X is a high-performance 16-bit microcontroller architecture that doubles internal data paths to 32 bits in selected operations while retaining the established S12 instruction set and tool chain. The XGATE auxiliary processor offloads interrupt servicing and peripheral data movement, allowing the main CPU to focus on application logic and reducing average interrupt latency by up to 50% compared with single-core S12 devices. This dual-processor approach delivers 32-bit-class performance with the deterministic response and code density of a 16-bit controller, fitting squarely within the broader category of automotive microcontrollers and embedded MCU ICs. Key features include 512 KB program Flash, 32 KB RAM, 4 KB EEPROM emulation area, CAN, SPI, SCI, I2C peripherals, plus a memory protection unit with supervisor/user modes for system integrity. The 12-bit ADC supports up to 24 channels with sequential scan capability, while the ECT delivers input capture, output compare, and pulse-width modulation functions. Multiple PWM channels and timer resources support motor control and switch-mode power conversion. Typical applications include automotive body controllers, instrument clusters, HVAC control modules, seat and mirror controllers, industrial sensor hubs, and CAN-based distributed control nodes. The wide operating temperature range and AEC-Q100 qualification make this device suitable for under-hood and chassis environments where reliability under thermal stress is mandatory. When designing with this device, ensure adequate decoupling on the 5V analog supply pins (VDDA/VSSA), route the CAN bus through a high-speed transceiver, and connect the BKGD pin to a secure debug header. The 144-pin LQFP provides ample I/O for mid-complexity body and chassis systems without requiring BGA routing complexity. This page synthesizes NXP manufacturer specifications, distributor pricing, drop-in same-family alternatives, and PCB layout guidance not found in the datasheet summary, giving procurement and design engineers a single decision-ready reference.

USD $16,40 En stock
S912XET512J3VAG - 16-bit 50MHz 512KB Flash MCU | NXP
S912XET512J3VAG

S912XET512J3VAG - 16-bit 50MHz 512KB Flash MCU | NXP

The NXP S912XET512J3VAG is a 16-bit HCS12X microcontroller running at 50 MHz bus speed with 512 KB (512K x 8) Flash program memory, integrated XGATE co-processor, and a 144-LQFP (20x20 mm) surface-mount package. A 16-bit microcontroller (MCU) is a single-chip computer whose CPU processes data in 16-bit words, sitting between 8-bit parts (low cost, simple control) and 32-bit parts (high compute) in the embedded hierarchy. The HCS12X family, originally developed by Freescale Semiconductor and now part of NXP Semiconductors, is a widely used automotive and industrial MCU architecture valued for its deterministic single-cycle core, 5V-tolerant I/O, and long lifecycle support. Key features of the S912XET512J3VAG include the XGATE co-processor, a separate RISC engine that offloads interrupt handling and I/O processing to create virtual peripherals and boost overall system throughput. Additional highlights are flexible, programmable hardware-emulated EEPROM, a memory protection unit (MPU) with supervisor/user modes for system integrity, and a 12-bit ADC with 3 us conversion time for accurate analog acquisition. On the peripheral side, the device offers an enhanced capture timer (ECT), periodic interrupt timer (PIT), real-time interrupt (RTI), PWM, watchdog timer (WDT), low-voltage detect (LVD), and power-on reset (POR). Connectivity interfaces cover CANbus for automotive networks, I2C, SPI, SCI (UART), IrDA, and an external bus interface (EBI/EMI), giving designers flexible options for both in-vehicle networking and board-level expansion. Typical applications include automotive body and chassis modules, industrial control systems, motor management units, and building automation nodes where a robust 16-bit core, CAN connectivity, and 105C-capable variants are required. The large 512 KB Flash accommodates complex protocol stacks such as CAN diagnostics (UDS/OBD) alongside application code. A key design consideration is clock configuration: to reach the full 50 MHz bus speed the on-chip PLL must be programmed correctly at startup, and EMC layout practices (short crystal traces, solid ground plane) become important. Budget Flash retention and EEPROM emulation endurance per the manufacturer datasheet for write-intensive uses. This page synthesizes distributor availability data, same-family drop-in alternatives, parametric comparison tables, and practical design notes not found in the manufacturer datasheet.

Cotización En stock
S912XET512J3VALR - 16-bit S12X MCU 512KB Flash 50MHz | NXP | 112-LQFP
S912XET512J3VALR

S912XET512J3VALR - 16-bit S12X MCU 512KB Flash 50MHz | NXP | 112-LQFP

The NXP S912XET512J3VALR is a 16-bit HCS12X family microcontroller featuring a 50 MHz S12X core with 512 KB on-chip program Flash and a hardware XGATE co-processor, housed in a 112-pin LQFP (20x20 mm) package. It supports 1.8V, 2.8V, and 5V operation, delivers automotive-grade temperature performance from -40C to +105C, and is AEC-Q100 qualified for safety-critical automotive applications. An HCS12X microcontroller is a 16-bit MCU family that extends the classic S12 architecture with an enhanced S12X CPU core plus a peripheral co-processor (XGATE) capable of offloading interrupt-driven tasks. Microcontrollers in this category sit under the broader hierarchy of embedded processors -> microcontrollers -> 16-bit MCUs -> automotive MCUs, and they are differentiated from 32-bit ARM Cortex-M parts by their deterministic interrupt latency, large Flash-to-pin ratio, and integrated CAN/LIN/SPI peripherals suited to body and chassis ECUs. Key features include 512 KB Flash (512K x 8) with 4 KB EEPROM emulation, 32 KB RAM, an XGATE co-processor for virtual peripherals, a 12-bit ADC with 3 us conversion time, an Enhanced Capture Timer (ECT), Periodic Interrupt Timer (PIT), and a Real Time Interrupt (RTI). The device integrates a Memory Protection Unit supporting supervisor/user modes for system integrity, a four-channel PWM, two SCI, two SPI, an I2C, and multiple CAN 2.0A/B controllers. Operating voltage supports 1.8V core / 2.8V or 5V I/O domains. The S12X CPU core delivers 32-bit-style instruction performance while retaining 16-bit code density. XGATE runs at twice the bus speed (up to 100 MHz) and offloads interrupt service routines, freeing the main CPU for control-loop computation. The on-chip voltage regulator and PLL simplify external power design - typically only a single 5V supply and decoupling capacitors are required at the PCB. Typical applications include automotive body control modules, instrument clusters, HVAC controllers, steering-angle sensors, seat and mirror controllers, and CAN/LIN gateway nodes. The wide operating voltage range also supports industrial CAN-node designs and 24V truck body electronics with external regulation. AEC-Q100 qualification and PPAP documentation support OEM source approval. Designers should pair the MCU with a 100 nF + 4.7 uF decoupling network on each VDD pin and route the ECLK/XIRQ/Reset signals with short traces. For CAN bus applications, place a TJA1050 or TJA1042 transceiver within 50 mm of the CAN pins and provide a 120 ohm split termination. The internal PLL requires a 4-16 MHz crystal with the recommended load capacitance listed in the datasheet. This page synthesizes distributor pricing, drop-in alternatives within the S12X family, and practical design notes not assembled in the manufacturer datasheet alone. Engineers evaluating long-life automotive programs will find the same-package alternatives list particularly useful for second-sourcing.

USD $7,10 En stock
S912XHZ256F1VAG - 16-bit MCU, S12X, 256KB Flash, 80MHz | NXP
S912XHZ256F1VAG

S912XHZ256F1VAG - 16-bit MCU, S12X, 256KB Flash, 80MHz | NXP

The NXP Semiconductors S912XHZ256F1VAG is a 16-bit HCS12X microcontroller IC featuring an 80 MHz CPU clock, 256 KB (256K x 8) of on-chip Flash, and a 144-pin LQFP (20x20 mm) package designed for automotive and industrial instrument-cluster applications. The device operates over a -40C to +105C temperature range and is qualified for automotive use, making it a drop-in fit for under-the-dash and body-electronics ECUs that demand long-term reliability. The integrated S12X core pairs a 16-bit CISC architecture with an XGATE peripheral co-processor, enabling deterministic, offloaded processing of display and communication tasks. An automotive microcontroller (MCU) is a microprocessor optimized for vehicle applications, integrating CPU, memory, timers, ADC, communication controllers (CAN, LIN, SPI, SCI), and increasingly LCD/TFT display drivers on a single die. Automotive MCUs typically exceed AEC-Q100 stress-test requirements, support wide supply rails (commonly 2.5V/5V), and include functional-safety features such as watchdog timers and ECC-protected memory. They sit hierarchically between general-purpose MCUs and powertrain-grade MCUs in the broader automotive electronics taxonomy. Key features of the S912XHZ256F1VAG include the industry's first on-chip TFT display driver for low-end dashboards, support for up to six analog gauges, dot-matrix displays, LCDs, and high-resolution color TFTs, plus an enhanced CAN count versus the legacy S12HZ family. Memory resources include 256 KB Flash and 12 KB RAM alongside 4 KB EEPROM emulation, while peripheral coverage provides MSCAN modules, SPI/SCI, PWM, an ADC, and the XGATE peripheral co-processor for real-time I/O handling. The S12X architecture layers a second peripheral co-processor (XGATE) alongside the main CPU, which lets the MCU service interrupt-heavy CAN, LIN, and display-refresh traffic without offloading the main thread. This dual-core-in-one-die model was NXP's signature differentiator versus simpler 16-bit competitors and remains attractive for cost-sensitive instrument-cluster designs that need TFT support without committing to a 32-bit ARM core. Typical applications include automotive instrument clusters with TFT displays, body control modules, HVAC human-machine interfaces, and industrial HMI panels that demand automotive-grade temperature and EMC behavior. Its automotive qualification also makes it suitable for motorcycle dashboards, agricultural equipment HMIs, and marine gauges. Compact design considerations include routing the wide LQFP-144 footprint on a 4-layer PCB and reserving an SPI/I2C bus for the TFT controller side-channel when an external larger TFT is cascaded. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, helping procurement and design engineers evaluate the S912XHZ256F1VAG for both new designs and field-replacement scenarios.

USD $13,98 En stock
S912XHZ512F1VAL - 16-bit MCU, 512KB Flash, 80MHz S12X | NXP
S912XHZ512F1VAL

S912XHZ512F1VAL - 16-bit MCU, 512KB Flash, 80MHz S12X | NXP

The NXP Semiconductors S912XHZ512F1VAL is a 16-bit microcontroller from the S12X family, featuring an S12X CPU core with 512KB of on-chip Flash memory, operating at up to 80MHz, qualified for the -40°C to +105°C automotive temperature range and packaged in a 112-pin LQFP. The 'X' in S12X denotes the enhanced XGATE coprocessor and richer peripheral mix that distinguish this family from the original HCS12 core, making the device well-suited to instrument-cluster and human-machine interface (HMI) applications. NXP originally targeted this sub-family at low-end automotive dashboard markets with on-chip TFT display drivers. A microcontroller (MCU) is a single-chip processor that integrates a CPU, non-volatile program memory (typically Flash), working RAM, and a set of on-chip peripherals such as timers, ADC, communication controllers (CAN, LIN, SPI, SCI), and I/O. MCUs sit at the lowest tier of the embedded computing hierarchy - below microprocessors (MPUs) and application processors - and are used wherever deterministic real-time control is required. The S12X family specifically targets body electronics, instrument clusters, and gateway modules that demand CAN connectivity, robust PWM channels, and an extended temperature envelope. Key specifications for the S912XHZ512F1VAL include 512KB of program Flash, 32KB of SRAM (typical for this family, see _validation_note), a 50MHz or 80MHz bus clock option, 8 PWM channels, two 1Mbps CAN 2.0A/B modules, an on-chip TFT display driver, and a -40°C to +105°C automotive operating range. The 112-pin LQFP package exposes enough I/O to drive a small TFT panel directly while still leaving pins for switch-scanning and body-network communication. Architecturally, the S12X combines a 16-bit HCS12 CPU with an XGATE peripheral coprocessor that offloads interrupt-intensive tasks (CAN, SPI, PWM) and lets the main CPU focus on application logic. The result is higher effective throughput than a single-core HCS12 part at the same clock frequency. The integrated TFT controller reduces external display-driver ICs and the associated BOM. Typical applications include automotive instrument clusters, HVAC control panels, body-control modules, motorcycle or scooter dashboards, and industrial HMI panels with a CAN bus backbone. The combination of CAN, PWM, ADC, and on-chip display drive makes it a single-chip solution for many 2-wheel and 4-wheel dashboard designs. When designing with this MCU, ensure the JTAG/BDM debug header is brought out to a standardized 6-pin or 10-pin header for programming and calibration. Also confirm that the chosen TFT panel's timing parameters fall within the on-chip display-controller limits documented in the device reference manual before committing to the PCB layout. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design considerations not found in the manufacturer datasheet. Data was cross-referenced across NXP's official product page, Octopart, DigiKey, Mouser, Heisener, Jotrin, and FindIC as of 2026-10-19.

USD $16,40 En stock
S912ZVC12F0MLF - 16-bit S12Z MagniV MCU 128KB Flash | NXP
S912ZVC12F0MLF

S912ZVC12F0MLF - 16-bit S12Z MagniV MCU 128KB Flash | NXP

The NXP Semiconductors S912ZVC12F0MLF is a MagniV 16-bit microcontroller built on the S12Z core, delivering 32 MHz CPU performance with 128 KB of on-chip Flash memory in a 48-pin LQFP (7x7 mm) package. It is part of NXP's automotive-qualified S12 MagniV family and operates across an extended -40C to +125C temperature range, targeting body, chassis, and motor-control automotive ECUs. The MagniV family integrates a high-voltage analog front-end together with a microcontroller die, reducing board area and BOM count in 12 V automotive applications. A 16-bit MCU (microcontroller) is a single-chip computer that integrates a CPU core, memory, peripherals, and analog/digital interfaces. The S12Z architecture is a 16-bit enhanced successor to the classic HCS12 family, with an improved instruction set, better code density, and a richer set of on-chip peripherals including CAN, LIN, SCI/SPI, PWM timers, and 12-bit ADC channels. The 'MagniV' designation means the die is paired with high-voltage analog circuitry capable of directly interfacing 12 V automotive buses and sensor signals without external level shifters. Key features of the S912ZVC12F0MLF include 128 KB (128K x 8) Flash, 4 KB to 8 KB of RAM (depending on peripheral allocation), a 32 MHz bus/core clock, on-chip CAN and LIN/SCI/SPI interfaces, multi-channel PWM suitable for motor control, and a 12-bit successive-approximation ADC. The device is qualified to NXP's automotive-grade standards, supporting PPAP and AEC-Q100 expectations for body and chassis ECUs. Architecturally, the S12Z core uses a pipelined 16-bit CPU with hardware multiply/divide, BDM (Background Debug Mode) for in-circuit debug, and a memory protection unit. The integrated voltage regulator and LIN/CAN physical layers allow direct connection to 12 V vehicle buses, simplifying PCB layout and reducing the need for external transceivers in some configurations. Typical applications include automotive body control modules, HVAC blowers and actuators, lighting controllers, smart junction boxes, and small motor-control ECUs such as seat or mirror adjusters. The combination of automotive qualification, integrated analog, and 32 MHz CPU performance makes this part a drop-in fit for cost-sensitive 12 V automotive nodes. When designing, verify that the 48-pin LQFP footprint and pinout match your PCB land pattern and that the package's thermal pad (if present) is soldered for heat dissipation.

USD $7,40 En stock
S912ZVC12F0VLF - S12Z MagniV 128KB Flash 32MHz MCU | NXP
S912ZVC12F0VLF

S912ZVC12F0VLF - S12Z MagniV 128KB Flash 32MHz MCU | NXP

The NXP S912ZVC12F0VLF is an automotive-qualified 16-bit microcontroller from the S12 MagniV family, built around the S12Z core and integrating 128KB of embedded Flash plus an analog-friendly high-voltage subsystem on a single die. It delivers 128KB (128K x 8) of program Flash and operates at up to 32MHz internal bus speed, packaged in a 48-pin LQFP (7x7 mm). The VLF suffix identifies the standard production LQFP-48 variant specified for -40C to +105C automotive environments. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM/EEPROM), and a set of on-chip peripherals. In the broader taxonomy this part is an automotive-grade 16-bit MCU -> CISC MCU -> embedded controller -> semiconductor IC. The S12Z core is the latest evolution of NXP's HCS12 family, offering enhanced instruction set and C-friendly architecture while retaining the deterministic interrupt behavior that made the S12 family popular in body and chassis electronics. Key features of the S912ZVC12F0VLF include 128KB Flash, 8KB RAM, 2KB EEPROM, 28 user I/O lines, and a peripheral portfolio covering CANbus, I2C, SCI, and SPI connectivity. On-chip analog includes an integrated voltage regulator and high-voltage I/O capable of direct 5V or 12V automotive bus interfacing - this is the defining feature of the MagniV line: the analog front end, supply regulation, and LIN/CAN PHY are integrated so the device can be powered directly from the 12V automotive battery. The S12Z core executes most instructions in a single bus cycle at 32MHz, giving roughly 32 MIPS of deterministic throughput. The integrated high-voltage input pins tolerate 40V load-dump transients, while the on-chip 5V regulator produces the internal logic supply. Built-in peripherals such as PWM channels, DMA, a watchdog timer, and POR reduce external component count for motor control and sensor interface designs. Typical applications include 12V automotive body control modules, HVAC blowers and fans, door/window lift modules, LIN/CAN sensor nodes, and small BLDC motor controllers. The integrated HV capability removes the need for external CAN transceivers on LIN slaves and allows direct connection to switches on the wiring harness. Designers should evaluate I/O count (28 pins available after HV/analog allocation), memory headroom for application code, and the LQFP-48 thermal envelope when selecting this part versus other S12 MagniV derivatives. This page synthesizes distributor pricing from DigiKey/Mouser/LCSC, drop-in S12Z family alternatives, and practical design notes not found in the manufacturer datasheet.

USD $8,05 En stock
S912ZVC96F0MLF - 96KB Flash S12Z MagniV 16-bit MCU | NXP
S912ZVC96F0MLF

S912ZVC96F0MLF - 96KB Flash S12Z MagniV 16-bit MCU | NXP

The NXP S912ZVC96F0MLF is an integrated single-package automotive-qualified 16-bit microcontroller from the MagniV family, combining an S12Z CPU core running up to 32 MHz with a 5V-regulator/LIN physical layer, 96 KB of on-chip Flash, 8 KB RAM, and 10-bit ADC, all housed in a 48-pin LQFP (7x7 mm) package. It targets cost-optimized automotive body, HVAC, and LIN-slave node applications. An S12Z microcontroller is a 16-bit member of the NXP HC12/S12 architecture family, often classed within the broader automotive microcontroller and embedded MCU taxonomies (low-end automotive MCU -> body-domain ECU MCU -> S12 MagniV family). The MagniV line specifically integrates the voltage regulator and physical-layer LIN transceiver on-chip, eliminating external LIN transceivers and external supply regulators to reduce the BOM and shrink PCB area for body-electronics modules. Key headline features include 96 KB (96K x 8) program Flash, 8 KB SRAM, a 32 MHz maximum CPU frequency with a 32 MHz bus clock, a 10-channel 10-bit SAR ADC, an integrated 5V linear regulator, a LIN 2.x/SCI physical layer, multiple timers (TIM, RTI, PIT), PWM channels, and a peripheral set covering GPIO, SPI, and SCI for in-vehicle networking. The RWW (Read-While-Write) Flash allows EEPROM emulation without an external serial EEPROM. Architecture is built around the 16-bit S12Z enhanced CPU with extended address space, hardware stack pointer handling, and BGND debug; the device integrates high-voltage analog inputs (5V/12V-tolerant), EEPROM at 2 KB, and a -40 to +125C AEC-Q100 grade-1 qualified operating range. The 48-LQFP footprint is shared across the ZV/ZC MagniV family variants, allowing pin-compatible upgrades across memory sizes. Typical applications include automotive HVAC door modules, seat controllers, window lift and door mirror modules, body-control slaves (LIN nodes), instrument cluster auxiliary circuits, and other body-domain ECUs. The integrated LIN and 5V regulator simplify LIN slave design versus discrete LIN MCU + external transceiver solutions. When designing with this device, ensure adequate decoupling (>=100 nF plus >=4.7 uF bulk) near the integrated regulator output, dedicate a star-ground connection between ADC analog ground and digital ground, and respect LIN bus load impedance requirements per the LIN 2.x specification. AEC-Q100 grade-1 qualification at -40 to +125C makes the part directly suitable for under-hood and door-module placements.

USD $7,50 En stock
S912ZVFP64F1VLL - 16-bit S12Z MagniV MCU 64KB Flash | NXP
S912ZVFP64F1VLL

S912ZVFP64F1VLL - 16-bit S12Z MagniV MCU 64KB Flash | NXP

The NXP Semiconductors S912ZVFP64F1VLL is a 16-bit S12Z MagniV mixed-signal microcontroller featuring 64KB Flash, 32MHz core clock, AEC-Q100 qualification, and a 100-pin LQFP package (14x14 mm). It integrates an S12Z CPU core with on-chip voltage regulator, CAN and LIN physical layer, display controller, and instrument gauge drivers targeting entry-level automotive and industrial instrument cluster applications. An S12Z MagniV MCU is a mixed-signal automotive microcontroller that combines a 16-bit S12Z processing core with high-voltage analog peripherals on a single die. It belongs to the broader MagniV family (mixed-signal MCU > automotive MCU > 16-bit MCU > microcontroller) and reduces system bill-of-materials by integrating the voltage regulator, physical-layer transceivers, and LCD/LED drivers that an instrument cluster normally requires as external components. This system-in-package integration is the key architectural advantage of the MagniV approach versus conventional automotive MCUs that need separate LIN/CAN transceivers and supply regulators. Key features of the S912ZVFP64F1VLL include 64KB (64K x 8) of embedded Flash, 32MHz maximum CPU clock frequency, automotive-grade temperature range of -40C to +105C, AEC-Q100 qualification, and 100 LQFP gull-wing leads. The S12Z core uses an enhanced instruction set with more linear addressing versus legacy HC12/HCS12 cores, allowing C-efficient code generation. On-chip RAM is 4KB and EEPROM is not specified in the available data. The device's mixed-signal architecture pairs the CPU with a built-in voltage regulator capable of direct 12V battery supply, plus CAN and LIN physical layers that meet automotive bus standards. Integrated display and gauge-driver peripherals support stepper-motor-based instrument pointers and segment LCDs without external driver ICs. The 100-pin LQFP exposes the full peripheral mix for cluster designs. Typical applications include automotive instrument clusters (speedometer, tachometer, fuel/temperature gauges), two-wheeler and entry-level automotive dashboards, industrial HMI panels, and body-domain controllers requiring CAN/LIN connectivity. The integrated LIN PHY particularly fits low-speed body and cluster networks. Design consideration: the on-chip voltage regulator and high-voltage analog inputs require careful PCB layout to isolate digital switching noise from sensitive analog sections. Decoupling capacitors specified in the manufacturer datasheet must be placed adjacent to the supply pins to meet EMC/ESD automotive requirements. This page synthesizes distributor pricing across 5+ sources, drop-in same-package alternatives from the S12Z MagniV family, and practical design notes not aggregated on the manufacturer product page alone.

USD $7,95 En stock
S912ZVFP64F1VLQ - 16-bit S12Z MagniV MCU, 64KB Flash, LQFP-144 | NXP
S912ZVFP64F1VLQ

S912ZVFP64F1VLQ - 16-bit S12Z MagniV MCU, 64KB Flash, LQFP-144 | NXP

The NXP S912ZVFP64F1VLQ is a 16-bit S12Z core MagniV mixed-signal microcontroller running at 32 MHz with 64 KB of on-chip Flash, housed in a 144-pin LQFP (20x20 mm) package. It is qualified to -40 °C to +105 °C and AEC-Q100 automotive grade, integrating a sophisticated MCU core with a voltage regulator, CAN and LIN physical layers, a display controller, and instrument gauge drivers. What is an automotive MCU? An automotive microcontroller (MCU) is a single-chip computer designed for the harsh electrical and thermal environment of vehicles, integrating CPU, memory, peripherals, and mixed-signal interfaces on one die. Within the broader semiconductor hierarchy, automotive MCUs belong to embedded microcontrollers, which themselves fall under microcontrollers (MCUs), then integrated circuits (ICs), then semiconductors. The S12 MagniV family from NXP is a mixed-signal MCU family targeting entry-level automotive instrument clusters and industrial HMI. Key features include 64 KB (64K x 8) of embedded Flash, 32 MHz S12Z CPU core, on-chip voltage regulator, integrated CAN and LIN physical layers (PHY), a display controller for instrument clusters, dedicated instrument gauge drivers (stepper/LED), and AEC-Q100 qualification for automotive use. The integration of analog PHY and gauge drivers alongside the CPU dramatically reduces external component count in cluster designs. Architecturally, the S12ZVH combines the S12Z 16-bit CPU with high-voltage analog macros including LIN/CAN transceivers and gauge driver outputs, all manufactured on NXP's automotive-qualified mixed-signal process. This single-chip integration eliminates the discrete CAN/LIN transceiver ICs and external regulators that traditional cluster designs require. Typical applications include entry-level automotive instrument clusters, two-wheeler / motorcycle dashboards, industrial HMI panels, CAN/LIN node controllers, and body electronics modules requiring analog gauge outputs. The wide -40 to +105 °C operating range also supports under-hood and industrial environments. When designing with this MCU, follow NXP's recommended decoupling scheme (typically 100 nF plus bulk capacitance near each supply pin) and consult the S12ZVH reference manual for the gauge-driver PCB layout, which is sensitive to ground bounce. This page synthesizes distributor pricing, drop-in S12 MagniV alternatives, and practical design notes not aggregated in any single manufacturer datasheet.

USD $7,69 En stock
S912ZVH128F2CLL - 32MHz 128KB Automotive MCU | NXP
S912ZVH128F2CLL

S912ZVH128F2CLL - 32MHz 128KB Automotive MCU | NXP

NXP S912ZVH128F2CLL is a MagniV 16-bit automotive mixed-signal microcontroller with an S12Z core, 128KB of flash memory, a 32 MHz operating frequency, and a 100-LQFP package. Rated for -40°C to +85°C, it combines an integrated voltage regulator, CAN and LIN physical layers, a display controller, and instrument-gauge drivers. These features support entry-level automotive and industrial instrument-cluster designs. A microcontroller is a programmable system-on-chip that executes embedded control logic, manages digital interfaces, and coordinates sensors, communications, displays, and actuators. In the automotive hierarchy, this S12Z device belongs to the S12 MagniV family of mixed-signal MCUs, combining a general-purpose CPU with analog and communication peripherals. Its automotive qualification and mixed-signal integration reduce the number of external discrete functions needed in instrument-cluster systems. The key verified features are a 16-bit S12Z core, 128KB flash organized as 128K x 8, a maximum stated frequency of 32 MHz, and a 100-LQFP 14 x 14 mm package. The integrated voltage regulator supports power-management functions, while CAN and LIN physical layers address vehicle-network connectivity. The display controller and instrument-gauge drivers are especially relevant to dashboard and cluster designs where display timing, gauge indication, and diagnostic communications must coexist. Architecturally, the part is designed around the 16-bit S12Z core rather than a general-purpose high-core-count processor. This makes it suitable for deterministic embedded control, gauge processing, vehicle-network communication, and display support. Its 128KB flash capacity provides dedicated program storage, while the integrated analog and communication blocks reduce board-level component count. The exact RAM size, ADC specifications, timer details, and electrical limits are not provided in the verified data and must be confirmed from the manufacturer documentation before design release. Typical applications include entry-level automotive instrument clusters, industrial instrument panels, CAN-connected gauge systems, LIN subnetwork controllers, and display-based control panels. The 32 MHz S12Z core provides the processing foundation for coordinating cluster graphics, gauge updates, button or rotary inputs, and vehicle-network messages. The integrated LIN physical layer is useful for local peripheral connectivity, while CAN supports higher-level vehicle-network communication. Designers should confirm the complete pinout, alternate-function multiplexing, external component requirements, reset behavior, clocking, and power-supply limits against the manufacturer documentation before layout. A 100-LQFP package has exposed leads on all four sides, so trace escape, thermal management, and signal-integrity planning remain important. The automotive qualification does not remove the need to validate transient immunity, EMC performance, temperature behavior, and production-test requirements for the finished vehicle or industrial system. This page consolidates the verified manufacturer and distributor product information with application guidance, sourcing context, and design cautions. It distinguishes documented facts from missing technical parameters and avoids treating generic cross-reference results as proof of pin compatibility.

USD $8,94 En stock
S912ZVH64F2CLQ - MagniV 16-bit MCU 64KB Flash 32MHz | NXP
S912ZVH64F2CLQ

S912ZVH64F2CLQ - MagniV 16-bit MCU 64KB Flash 32MHz | NXP

The NXP Semiconductors S912ZVH64F2CLQ is a MagniV 16-bit automotive microcontroller with an S12Z CISC core running at 32MHz, 64KB of Flash memory, an operating temperature range of -40C to +85C, and a 144-pin LQFP (20x20 mm) surface-mount package. A MagniV MCU is a mixed-signal microcontroller that integrates power management, communication physical layers, and driver circuitry on the same die as the CPU. In the broader hierarchy, the S912ZVH64F2CLQ sits within the S12 MagniV family of 16-bit microcontrollers, which belong to the class of automotive embedded processors used in body electronics and instrumentation systems. Key features include a 32MHz HCS12Z CPU core, 64KB (64K x 8) of Flash program memory, an integrated voltage regulator, CAN and LIN physical layers, a display controller, and instrument gauge drivers for stepper motor gauges and segment LCD displays. The integration of the physical layer transceivers removes external CAN/LIN transceiver ICs from the bill of materials and reduces PCB area in cluster electronics. The S12ZVH series is specifically designed for controlling automotive and industrial instrument clusters. The on-chip display controller drives segment LCDs, while dedicated gauge drivers directly control stepper-motor pointers for speedometers, tachometers, and fuel gauges. The automotive qualification and -40C to +85C temperature grade support entry-level vehicle programs and harsh industrial environments. Typical applications include entry-level automotive instrument clusters, motorcycle and off-road vehicle gauge systems, and industrial panel instrumentation requiring CAN connectivity and mixed LCD/stepper display driving. A key design consideration: the device is supplied in Tray packaging, and the 144-LQFP (20x20) footprint requires careful decoupling of the integrated regulator and attention to the datasheet layout guidelines for the mixed-signal physical layers. This page synthesizes distributor availability data, same-family drop-in alternatives, and practical design guidance not consolidated in the manufacturer datasheet, giving engineers a single citable reference for selection and sourcing decisions.

USD $5,95 En stock
S912ZVHL32F1VLL - S12Z MagniV 16-bit MCU 32KB Flash | NXP
S912ZVHL32F1VLL

S912ZVHL32F1VLL - S12Z MagniV 16-bit MCU 32KB Flash | NXP

The NXP Semiconductors S912ZVHL32F1VLL is a MagniV 16-bit microcontroller with an S12Z core running at 32 MHz, integrating 32 KB of Flash program memory, 2 KB of RAM, and 2 KB of EEPROM, housed in a 100-pin LQFP (14x14 mm) package. It is rated for automotive qualification and operates from -40 °C to +105 °C, targeting instrument-cluster and body-electronics applications. A microcontroller (MCU) is a single-chip computer that combines a CPU core, non-volatile program memory, working RAM, and on-chip peripherals. The 16-bit class sits between 8-bit legacy MCUs and 32-bit Cortex-M devices, offering a balance of deterministic interrupt response, code density, and peripheral integration. MagniV parts further shrink the system bill of materials by co-integrating the voltage regulator, LIN/CAN physical layer, LCD driver, and gauge drivers inside one package. The S912ZVHL32F1VLL features 73 user I/O lines, communication interfaces (CAN, LIN, SCI, SPI, I²C), and on-chip peripherals including DMA, LCD controller, PWM, watchdog timer, and power-on reset. The S12Z core delivers up to 32 MHz performance with enhanced interrupt handling and a richer instruction set than older S12X derivatives. The integrated LCD controller and stepper-motor gauge drivers make the part specifically suited to automotive dashboard and motorcycle/mid-tier instrument clusters. Typical applications include two- and four-wheel automotive instrument clusters, body controllers with LIN/CAN connectivity, HVAC control heads, motorcycle dashboards, and industrial HMI panels with LCD readout. Its 100-LQFP footprint and -40 °C to +105 °C grade cover mainstream under-hood and cabin-zone environments. When designing with this MCU, ensure the integrated regulator's input bulk capacitance follows the NXP reference design and the LIN/CAN bus pins are protected per IEC 61000-4-2 ESD guidelines. The 100-LQFP allows rework-friendly hand soldering and standard 0.5 mm-pitch PCB layout for low-volume production. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not consolidated on the NXP product page or third-party distributor listings.

USD $5,32 En stock
S912ZVHL64F1VLL - 64KB Flash S12Z MagniV MCU 32MHz | NXP
S912ZVHL64F1VLL

S912ZVHL64F1VLL - 64KB Flash S12Z MagniV MCU 32MHz | NXP

The NXP S912ZVHL64F1VLL is a 16-bit S12Z MagniV mixed-signal microcontroller delivering 32MHz CPU speed with 64KB (64Kx8) on-chip Flash program memory in a 100-pin LQFP (14x14mm) surface-mount package. It integrates an S12Z core with 73 user I/O lines, 32MHz bus clock, 4KB EEPROM data storage, 4KB SRAM, and a rich set of analog/digital peripherals designed for entry-level automotive and industrial instrument-cluster applications. A MagniV mixed-signal MCU is a single-chip microcontroller that combines the CPU core, voltage regulator, and physical-layer communication transceivers (CAN, LIN, SCI, SPI, I2C) in one mixed-signal die, reducing bill-of-materials count and PCB area in body-electronics and instrument-cluster designs. The S12ZVH family specifically targets automotive gauge and display subsystems where it pairs the CPU with display-driver and stepper-motor-driver peripherals for direct connection to instrument cluster needles and segment LCDs. Key features include an integrated voltage regulator (VREG), an LCD driver, stepper-motor gauge drivers for analog needle actuation, an MS-CAN module for in-vehicle networking, and LIN physical layer compliance. The 73 GPIO lines support direct segment-LCD multiplexing and the automotive AEC-Q100 qualification with the -40C to +105C operating range allows operation under hood-side cluster thermal stress. Hardware security, cyclic redundancy check, and watchdog timer improve functional-safety compliance. The S12ZVH architecture builds on Freescale/NXP's S12 legacy with an enhanced instruction set, larger linear address space, and improved C-compiler support. The 100-LQFP package provides ample I/O for instrument cluster pinouts while remaining within a moderate 14x14mm footprint suitable for double-sided PCB assembly. The on-chip voltage regulator can derive the internal 1.8V logic supply directly from a 5V automotive battery rail. Typical applications include automotive instrument clusters (speedometer/tachometer/fuel/temperature gauges with segment LCD), two-wheeler and small-EV dashboards, HVAC control panels, body controllers with LIN sub-nodes, and industrial HMI panels. The integrated stepper-motor drivers make it the natural fit for stepper-needle clusters without requiring external driver ICs. When designing with the S912ZVHL64F1VLL, ensure PCB layout keeps the on-chip regulator decoupling caps within 3mm of the VREG pins, and use the BDLC (Byte Data Link Controller) or MS-CAN module per NXP's reference application notes for OEM-network compliance. For LCD bias generation, follow the datasheet's recommended charge-pump and resistor-ladder network to minimize ghost-segment artifacts.

USD $4,07 En stock
S912ZVHY32F1CLL - 32MHz 32KB Flash MCU | NXP | Automotive
S912ZVHY32F1CLL

S912ZVHY32F1CLL - 32MHz 32KB Flash MCU | NXP | Automotive

The NXP Semiconductors S912ZVHY32F1CLL is an automotive-qualified 16-bit S12Z MagniV mixed-signal microcontroller operating at 32 MHz, with 32 KB of flash memory and a 100-pin LQFP package measuring 14 x 14 mm. It includes 73 I/O pins and integrates communication and display-oriented peripherals for instrument-cluster designs. A microcontroller is a programmable semiconductor that combines a processor core, memory, communication controllers, timers, and input/output functions on one integrated circuit. The S12Z belongs to the MagniV mixed-signal MCU family, combining digital control with analog and communication capabilities. Its system position is MCU -> embedded controller -> mixed-signal processing -> automotive electronics. Verified features include a 16-bit S12Z core, 32 KB flash organized as 32K x 8, 32 MHz operation, CAN, LIN, I2C, SCI, and SPI connectivity, plus DMA, LCD, power-on reset, PWM, and watchdog-timer peripherals. The integrated voltage regulator, display controller, CAN and LIN physical layers, and instrument-gauge drivers reduce the external circuitry needed for entry-level automotive and industrial instrument clusters. The S912ZVHY32F1CLL supports a 4.5 V to 5.5 V supply range and 73 digital I/O functions. Its -40°C to +85°C temperature range and automotive-qualified status make it suitable for temperature-variable vehicle environments. Because it is a mixed-signal MCU rather than a power semiconductor, no safe-operating-area curve applies. Typical uses include automotive instrument clusters, gauge-control boards, CAN or LIN network nodes, display controllers, body-control modules, and industrial panel interfaces. Engineers should use the complete NXP documentation set to confirm startup, pin multiplexing, memory maps, clocking, and peripheral electrical limits before releasing production hardware. The most important layout consideration is decoupling of the 5 V supply and routing of CAN, LIN, display, and instrument-gauge signals. This page consolidates verified distributor availability, manufacturer positioning, and practical selection guidance, while marking unverified technical details rather than estimating them.

USD $1,81 En stock