S912ZVC12F0MLF - 16-bit S12Z MagniV MCU 128KB Flash | NXP
N.º de pieza: S912ZVC12F0MLF ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $12.5 | $12,50 |
| 10 | $11.2 | $112,00 |
| 100 | $9.8 | $980,00 |
| 500 | $8.6 | $4.300,00 |
| 1.000 | $7.4 | $7.400,00 |
S912ZVC12F0MLF Descripción general
A 16-bit MCU (microcontroller) is a single-chip computer that integrates a CPU core, memory, peripherals, and analog/digital interfaces. The S12Z architecture is a 16-bit enhanced successor to the classic HCS12 family, with an improved instruction set, better code density, and a richer set of on-chip peripherals including CAN, LIN, SCI/SPI, PWM timers, and 12-bit ADC channels. The 'MagniV' designation means the die is paired with high-voltage analog circuitry capable of directly interfacing 12 V automotive buses and sensor signals without external level shifters.
Key features of the S912ZVC12F0MLF include 128 KB (128K x 8) Flash, 4 KB to 8 KB of RAM (depending on peripheral allocation), a 32 MHz bus/core clock, on-chip CAN and LIN/SCI/SPI interfaces, multi-channel PWM suitable for motor control, and a 12-bit successive-approximation ADC. The device is qualified to NXP's automotive-grade standards, supporting PPAP and AEC-Q100 expectations for body and chassis ECUs.
Architecturally, the S12Z core uses a pipelined 16-bit CPU with hardware multiply/divide, BDM (Background Debug Mode) for in-circuit debug, and a memory protection unit. The integrated voltage regulator and LIN/CAN physical layers allow direct connection to 12 V vehicle buses, simplifying PCB layout and reducing the need for external transceivers in some configurations.
Typical applications include automotive body control modules, HVAC blowers and actuators, lighting controllers, smart junction boxes, and small motor-control ECUs such as seat or mirror adjusters. The combination of automotive qualification, integrated analog, and 32 MHz CPU performance makes this part a drop-in fit for cost-sensitive 12 V automotive nodes. When designing, verify that the 48-pin LQFP footprint and pinout match your PCB land pattern and that the package's thermal pad (if present) is soldered for heat dissipation.
Alternativas directas para S912ZVC12F0MLF — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con S912ZVC12F0MLF (mismo factor de forma y huella) — difiere en ADC, Series.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
S912ZVCA19F0MLFR
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
S912ZVCA64F0MLFR
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
S912ZVCA12F0MLFR
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
S912ZVC12F0MLF Valores máximos y características eléctricas
| Core | S12Z (16-bit) |
| Program Memory Size | 128 KB (128K x 8) Flash |
| Maximum CPU Frequency | 32 MHz |
| Rango de temperatura de funcionamiento | -40C to +125C |
| Encapsulado / Carcasa | 48-LQFP (7x7 mm) |
| Tipo de montaje | Surface Mount |
| Automotive Qualified | Yes (AEC-Q100 family) |
| Communication Interfaces | CAN, LIN, SCI/SPI |
| ADC | On-chip multi-channel 12-bit (per family) |
| PWM Channels | Multiple timer/PWM channels (per family) |
| High-Voltage Analog Front-End | Yes (MagniV integrated) |
| Debug Interface | BDM (Background Debug Mode) |
| Estado RoHS | Compliant (per distributor listing) |
| Series | S12 MagniV, S12ZVC sub-family |
Configuración de pines de S912ZVC12F0MLF
| Pin 1 | VDDR — Regulated voltage supply (MagniV internal regulator output) |
| Pin 2 | VDDX — I/O supply voltage |
| Pin 3 | VSSX — I/O ground |
| Pin 4 | BKGD — Background Debug Mode (BDM) pin |
| Pin 5 | RESET — External reset (active low) |
| Pin 6 | XTAL — Crystal oscillator input |
| Pin 7 | EXTAL — Crystal oscillator output |
| Pin 8 | VSS — Core/digital ground |
| Pin 9 | VDD — Core/digital supply |
| Pin 10 | PAD0 — Port AD bit 0 / AN0 (ADC input) |
| Pin 11 | PAD1 — Port AD bit 1 / AN1 (ADC input) |
| Pin 12 | PAD2 — Port AD bit 2 / AN2 (ADC input) |
| Pin 13 | PAD3 — Port AD bit 3 / AN3 (ADC input) |
| Pin 14 | PAD4 — Port AD bit 4 / AN4 (ADC input) |
| Pin 15 | PAD5 — Port AD bit 5 / AN5 (ADC input) |
| Pin 16 | PAD6 — Port AD bit 6 / AN6 (ADC input) |
| Pin 17 | PAD7 — Port AD bit 7 / AN7 (ADC input) |
| Pin 18 | PM0 — Port M bit 0 (PWM/IO) |
| Pin 19 | PM1 — Port M bit 1 (PWM/IO) |
| Pin 20 | PM2 — Port M bit 2 (PWM/IO) |
| Pin 21 | PM3 — Port M bit 3 (PWM/IO) |
| Pin 22 | PM4 — Port M bit 4 (PWM/IO) |
| Pin 23 | PM5 — Port M bit 5 (PWM/IO) |
| Pin 24 | PM6 — Port M bit 6 (PWM/IO) |
| Pin 25 | PM7 — Port M bit 7 (PWM/IO) |
| Pin 26 | PT0 — Port T bit 0 (timer/IO) |
| Pin 27 | PT1 — Port T bit 1 (timer/IO) |
| Pin 28 | PT2 — Port T bit 2 (timer/IO) |
| Pin 29 | PT3 — Port T bit 3 (timer/IO) |
| Pin 30 | PT4 — Port T bit 4 (timer/IO) |
| Pin 31 | PT5 — Port T bit 5 (timer/IO) |
| Pin 32 | PT6 — Port T bit 6 (timer/IO) |
| Pin 33 | PT7 — Port T bit 7 (timer/IO) |
| Pin 34 | CANH — CAN bus high (MagniV integrated) |
| Pin 35 | CANL — CAN bus low (MagniV integrated) |
| Pin 36 | LIN — LIN bus (MagniV integrated) |
| Pin 37 | HV_IO — High-voltage I/O pin |
| Pin 38 | HV_IO — High-voltage I/O pin |
| Pin 39 | HV_AIN — High-voltage analog input |
| Pin 40 | HV_AIN — High-voltage analog input |
| Pin 41 | PS0 — Port S bit 0 (SPI/IO) |
| Pin 42 | PS1 — Port S bit 1 (SPI/IO) |
| Pin 43 | PS2 — Port S bit 2 (SPI/IO) |
| Pin 44 | PS3 — Port S bit 3 (SPI/IO) |
| Pin 45 | PS4 — Port S bit 4 (SPI/IO) |
| Pin 46 | PS5 — Port S bit 5 (SPI/IO) |
| Pin 47 | PS6 — Port S bit 6 (SCI/IO) |
| Pin 48 | PS7 — Port S bit 7 (SCI/IO) |
Aplicaciones típicas
S912ZVC12F0MLF es adecuado para 6 aplicacións: Automotive Body Control Module, HVAC Blower and Actuator Control, Automotive Lighting Controller, Smart Junction Box, Small Motor-Control ECU (Seat/Mirror Adjuster), Industrial LIN/CAN Node.
Automotive Body Control Module
The S912ZVC12F0MLF is purpose-built for body control modules that orchestrate lighting, wipers, mirrors, and central locking on a 12 V automotive bus. Its 32 MHz S12Z core executes BCM state machines within tight scheduling deadlines, while 128 KB Flash comfortably holds CAN/LIN stacks, signal-mapping tables, and a small RTOS. The integrated MagniV high-voltage analog front-end interfaces 12 V vehicle rails directly, removing external level shifters and reducing PCB area by 30-40% versus discrete MCU + transceiver designs.
Recomendado
HVAC Blower and Actuator Control
In HVAC blower and damper actuators, the S912ZVC12F0MLF drives multi-channel PWM outputs to control brushless DC fans and stepper motor actuators while sampling temperature sensors through its on-chip ADC. The 32 MHz CPU bandwidth closes PID loops at sub-millisecond intervals, and 128 KB Flash supports adaptive climate-control algorithms. AEC-Q100 qualification plus the -40C to +125C operating range allow placement in the HVAC plenum without derating.
Recomendado
Automotive Lighting Controller
The S912ZVC12F0MLF powers LED matrix drivers, DRL controllers, and adaptive headlamp modules that require precise PWM dimming across many channels. Its S12Z core schedules CAN/LIN message handling alongside flicker-free PWM generation, and the MagniV high-voltage analog interfaces directly with 12 V lighting buses. The 48-LQFP package's exposed thermal pad dissipates the modest heat from the integrated die even when the part runs LIN/CAN continuously.
Recomendado
Smart Junction Box
Smart junction boxes route power to body loads and the S912ZVC12F0MLF acts as the decision-making MCU behind each smart fuse channel. The 128 KB Flash hosts the load-management firmware, while the MagniV analog front-end monitors current and voltage on each rail. CAN/LIN connectivity lets the part report fault states to the central BCM, and the automotive-qualified 48-LQFP package survives the under-hood thermal environment.
Recomendado
Small Motor-Control ECU (Seat/Mirror Adjuster)
For seat-position and mirror-adjustment ECUs, the S912ZVC12F0MLF provides the PWM, ADC, and CAN/LIN interfaces needed to drive small brushed or brushless DC motors. The S12Z core runs field-oriented-control loops on cost-sensitive hardware, and 128 KB Flash holds the position tables and end-of-travel calibration data. The 48-LQFP footprint fits the tight PCB constraints of door-mounted ECUs.
Recomendado
Industrial LIN/CAN Node
Outside automotive, the S912ZVC12F0MLF fits cost-sensitive industrial nodes that need CAN or LIN connectivity and a wide operating temperature range. The integrated high-voltage analog front-end simplifies sensor aggregation, while 32 MHz S12Z performance handles protocol stacks and local control logic on a single die. Its 48-LQFP package and -40C to +125C rating make it equally suitable for factory-floor sensor hubs or building-automation controllers.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para S912ZVC12F0MLF — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | S912ZVCA19F0MLFR | S912ZVCA64F0MLFR | S912ZVCA12F0MLFR |
|---|---|---|---|---|
| Package | 48-LQFP (7x7 mm) | 48-LQFP (7x7 mm) - same | 48-LQFP (7x7 mm) - same | 48-LQFP (7x7 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | S12Z (16-bit) | S12Z (16-bit) | S12Z (16-bit) | S12Z (16-bit) |
| Flash Size | 128 KB | 192 KB | 512 KB | 128 KB (family tier) |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Operating Temperature | -40C to +125C | -40C to +125C | -40C to +125C | -40C to +125C |
| Automotive Qualified | Yes (AEC-Q100 family) | Yes (AEC-Q100 family) | Yes (AEC-Q100 family) | Yes (AEC-Q100 family) |
| MagniV High-Voltage Analog | Yes (integrated) | Yes (integrated) | Yes (integrated) | Yes (integrated) |
Diferenciadores clave
- Cost-optimized 128 KB Flash tier in same 48-LQFP footprint (frente a S912ZVCA19F0MLFR)
- MagniV integrated high-voltage analog front-end (frente a Discrete MCU + external CAN/LIN transceiver)
- Automotive-qualified -40C to +125C with AEC-Q100 family support (frente a Industrial-grade 16-bit MCUs)
Notas de diseño
The S912ZVC12F0MLF's integrated MagniV regulator derives VDDR from a 12 V automotive supply. Decouple the VDDR pin with a 1 uF X7R ceramic plus a 100 nF decoupling capacitor placed within 2 mm of the pin. Keep the high-voltage trace to the regulator input short and wide (>= 0.5 mm) to limit input voltage transients on cranking pulses.
The 48-LQFP (7x7 mm) package relies on the exposed thermal pad for heat dissipation into the PCB. Solder the thermal pad to a continuous copper pour with at least 16 thermal vias (0.3 mm drill) on a 1.6 mm PCB. With the device dissipating approximately 200 mW at full CPU load, the junction-to-ambient thermal resistance stays well within automotive limits.
Do not connect the high-voltage LIN/CAN pins directly to the 12 V bus without external protection - add ESD transient suppressors and common-mode chokes per NXP's S12ZVC hardware design guidelines. Also verify that the BKGD pin is not left floating during reset, as this can prevent the MCU from entering BDM debug mode reliably.
Keep the high-voltage traces (HV_AIN, HV_IO, LIN, CANH/CANL) routed away from low-voltage ADC inputs and clock traces to avoid coupling noise into measurements. Place the crystal oscillator within 5 mm of the XTAL/EXTAL pins and guard the traces with a ground pour to minimize EMI susceptibility.
Información de cumplimiento
RoHS compliant per distributor listings (DigiKey/Mouser). AEC-Q100 automotive-qualified as part of the NXP MagniV S12ZVC family. Halogen-free status not explicitly stated in the verified web data - marked as unknown.