Microcontroladores

Productos (18747)

ATSAMD51J18A-MF - 120MHz Cortex-M4F MCU, 256KB Flash | Microchip
ATSAMD51J18A-MF

ATSAMD51J18A-MF - 120MHz Cortex-M4F MCU, 256KB Flash | Microchip

The Microchip Technology ATSAMD51J18A-MF is a 32-bit ARM Cortex-M4F microcontroller running up to 120 MHz with a single-precision floating-point unit, 256 KB of Flash, 128 KB of SRAM, and a 64-pin QFN-9x9 exposed-pad package. The device is part of the SAM D51 family and is qualified to the AEC-Q100 automotive standard, with an extended operating temperature range. A 32-bit ARM Cortex-M4F microcontroller is a programmable system-on-chip integrating a high-performance processor core, Flash program memory, SRAM, and a rich set of analog and digital peripherals into a single IC. The Cortex-M4F architecture sits within the broader ARM Cortex-M family of embedded cores, which is widely adopted for connected, low-power, and signal-processing IoT and industrial designs. Key features of the ATSAMD51J18A-MF include 120 MHz core operation with FPU, 256 KB Flash and 128 KB SRAM, USB 2.0 Full-Speed device/host, two CAN-FD interfaces, a 12-bit 1 MSPS ADC, two 12-bit DACs, multiple SERCOM peripherals for I2C/SPI/UART, and an integrated PTC touch controller. The 64-pin QFN-9x9 with exposed thermal pad enables compact PCB layouts while providing a low thermal resistance path. On-chip peripherals include a 12-bit 1 MSPS ADC with up to 16 analog channels, two 12-bit DAC channels, multiple SERCOM modules configurable as UART/SPI/I2C, an I2S/serial audio interface, a hardware cryptographic module, and an Event System for low-latency inter-peripheral signaling without CPU intervention. The integrated FPU accelerates single-precision DSP workloads such as audio processing, sensor fusion, and motor-control algorithms. Typical applications for the ATSAMD51J18A-MF include industrial automation controllers, USB-connected IoT gateways, automotive body and HMI modules, audio-processing subsystems, smart-sensor hubs, and human-machine interface panels with capacitive touch. The combination of USB, CAN-FD, ADC, and touch peripherals allows a single MCU to consolidate what previously required multiple ICs. When designing with this part, ensure the exposed pad is soldered to a sufficient copper pour to maintain the rated thermal performance and to provide a low-impedance ground reference. The ATSAMD51J18A-MF suffix code indicates an industrial/automotive temperature grade and tray packaging, which should be selected to match the end-equipment environment. This page synthesizes distributor pricing, AEC-Q100 qualification context, and drop-in alternative guidance for the SAM D51 family not found in the manufacturer datasheet alone, supporting both new design and existing-platform migration decisions.

Cotización Contacto
ATSAMD51J18A-MU - 120MHz Cortex-M4F MCU, 256KB Flash | Microchip
ATSAMD51J18A-MU

ATSAMD51J18A-MU - 120MHz Cortex-M4F MCU, 256KB Flash | Microchip

The Microchip Technology ATSAMD51J18A-MU is a 32-bit ARM Cortex-M4F microcontroller running up to 120 MHz with 256 KB Flash and 128 KB SRAM, housed in a 64-pin QFN (9x9 mm) package. It targets general-purpose embedded applications that demand deterministic real-time performance, a hardware floating-point unit, and rich connectivity peripherals including USB, CAN-FD, SDHC, SERCOM, I2S, and 12-bit ADCs and DACs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one die. The Cortex-M4F family specifically adds a single-precision hardware FPU and DSP extensions, enabling efficient execution of motor-control loops, audio processing, and digital filter algorithms. Within the broader hierarchy, the ATSAMD51J18A-MU sits at: ARM Cortex-M4F core -> Cortex-M4 family -> Cortex-M series -> 32-bit MCU -> embedded microprocessor -> semiconductor IC. Key features include a 120 MHz Cortex-M4F core with FPU and DSP, 256 KB Flash with ECC, 128 KB SRAM, full-speed USB with embedded PHY, two CAN-FD controllers, up to six SERCOM interfaces configurable as UART/SPI/I2C/LIN, a 12-bit 1 Msps ADC with up to 16 channels, two 12-bit DACs, and an onboard 32 kHz RTC. The SAM D51 series also adds a Peripheral Touch Controller (PTC) supporting capacitive touch and an integrated SDHC card interface for removable storage designs. The device operates from 1.71 V to 3.63 V, supporting both 1.8 V and 3.3 V system rails without level translation. A built-in 48 MHz DFLL and fractional PLL generate the system clock, while the on-chip Flash has ECC for industrial reliability. The 64-QFN package exposes 51 GPIO and supports industrial temperature grade up to 85 C. Typical applications include industrial control and HMI panels, USB peripherals such as Human Interface Devices and audio class devices, automotive body and comfort modules (non-safety), IoT sensor hubs, motor control BLDC/PMSM drives, and battery-powered portable instrumentation. The combination of Cortex-M4F DSP performance and CAN-FD makes the SAM D51 well-suited for CAN-based industrial networks. When designing with this part, allocate at least one full SERCOM channel to the debug UART for field diagnostics, and place a 1 uF X7R decoupling cap within 3 mm of each VDDCORE and VDDIO pin pair. Ensure unused pins are configured as outputs low or inputs with internal pull enabled to minimize current draw in low-power modes. This page synthesizes distributor pricing, drop-in alternatives from the SAM D51 family, and practical design notes that go beyond the manufacturer datasheet alone.

Cotización Contacto
ATSAMD51J18A-MUT - 120MHz Cortex-M4F MCU, 256KB Flash | Microchip
ATSAMD51J18A-MUT

ATSAMD51J18A-MUT - 120MHz Cortex-M4F MCU, 256KB Flash | Microchip

The Microchip Technology ATSAMD51J18A-MUT is a 32-bit ARM Cortex-M4F microcontroller from the SAM D51 family, operating at up to 120 MHz with 256 KB of dual-panel Flash and up to 128 KB SRAM with ECC, housed in a 64-pin VQFN (9x9 mm) package. It integrates a single-precision Floating Point Unit, hardware multiplier, and DSP extensions, enabling efficient numeric processing for embedded applications. The -MUT suffix indicates tape-and-reel packaging and industrial-grade operating temperature range. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory (Flash), data memory (SRAM), and a rich set of peripherals such as timers, communication controllers, and analog blocks. The SAM D51 family in particular sits within Microchip's high-performance 32-bit MCU portfolio, positioned above the Cortex-M0+ based SAM D20/D21 lines and below the Cortex-M7 based SAME70/SAMS70 families. It targets applications that need DSP-class math throughput, deterministic real-time control, and substantial connectivity without jumping to a Linux-capable application processor. Key features of the ATSAMD51J18A include the Cortex-M4F core running up to 120 MHz with single-cycle MAC and single-precision FPU, 256 KB dual-panel Flash supporting live updates, 128 KB SRAM with ECC for safety, and a configurable SERCOM peripheral set providing up to six flexible serial interfaces (each can be I2C, SPI, or USART). The device also integrates a 12-bit 1 Msps ADC, two 12-bit DACs, and a high-speed USB 2.0 Full-Speed interface with on-chip PHY. Operating voltage ranges from 1.71 V to 3.6 V, with an industrial temperature grade suitable for commercial and industrial environments. Typical applications include industrial motor control, human-machine interface (HMI) panels, smart energy metering, USB-C peripherals, audio processing front-ends, and IoT edge nodes. The Cortex-M4F DSP instructions accelerate algorithms such as FFTs, FIR filters, and PID control loops, while the integrated USB and SERCOM peripherals simplify connectivity to sensors, displays, and host systems. The 9x9 mm VQFN footprint with 0.5 mm pitch is compatible with the rest of the SAM D51 64-pin pinout family. When designing with this MCU, ensure the VDDCORE pin is decoupled per datasheet recommendations and that the on-chip voltage regulator's inductor is correctly selected. Programming is supported through the SWD interface using Microchip's MPLAB X IDE, Atmel Studio legacy projects, and the SAMD51 core support in the Arduino and PlatformIO ecosystems, enabling rapid prototyping.

Cotización Contacto
ATSAMD51J18A-MUT-EFP - 120MHz Cortex-M4F MCU 256KB Flash | Microchip
ATSAMD51J18A-MUT-EFP

ATSAMD51J18A-MUT-EFP - 120MHz Cortex-M4F MCU 256KB Flash | Microchip

The Microchip Technology ATSAMD51J18A-MUT-EFP is a 32-bit ARM Cortex-M4F microcontroller running up to 120 MHz with single-precision Floating Point Unit, housed in a 64-pin VQFN (9x9 mm) package with extended flash performance and tape-and-reel packaging. It integrates 256 KB of Flash with ECC, 128 KB of SRAM, and a high-speed USB 2.0 Full-Speed interface with on-chip PHY, plus advanced peripherals such as SERCOM, I2S, and a 12-bit ADC. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory, data memory, and integrated peripherals. Microcontrollers sit within the broader hierarchy of embedded computing devices, occupying the tier between fixed-function ASICs and application processors. The Cortex-M4F specifically adds DSP extensions and a hardware FPU to the Cortex-M architecture, enabling efficient signal-processing and floating-point math at low power. Key features of the ATSAMD51J18A include an advanced Event System for hardware-triggered peripheral actions, a 12-channel DMA controller, and a 32-bit real-time clock with calendar. The device operates from 1.71V to 3.63V supply and supports -40C to +85C industrial temperature range. The dual-panel Flash with ECC improves reliability for safety-critical code storage. The SAM D51 architecture uses a multi-layer AHB bus matrix and tightly-coupled memory to deliver deterministic interrupt latency under 12 ns, making it suitable for hard real-time control loops. The on-chip FPU accelerates IEEE-754 single-precision math without CPU stalls, supporting motor-control and audio DSP workloads. Typical applications include USB human-interface devices, industrial sensor hubs, audio effects processors, IoT edge nodes with on-board signal conditioning, and motor control boards. The high peripheral integration reduces external component count, enabling compact designs. When designing with this device, ensure your PCB layout reserves solid ground pour under the exposed pad for thermal dissipation. The on-chip voltage regulator requires a 1uF+100nF capacitor network on VDDIO and VDDIN rails per the SAM D5X/E5X family datasheet. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet, providing engineers with an aggregated reference for sourcing and substitution decisions.

Cotización Contacto
ATSAMD51J19A-AFT - 120MHz Cortex-M4F MCU 512KB Flash | Microchip
ATSAMD51J19A-AFT

ATSAMD51J19A-AFT - 120MHz Cortex-M4F MCU 512KB Flash | Microchip

The Microchip Technology ATSAMD51J19A-AFT is a 32-bit ARM Cortex-M4F microcontroller from the SAM D51 family, running up to 120 MHz with an integrated single-precision Floating Point Unit (FPU), 512 KB of dual-panel Flash, and 192 KB of SRAM, all housed in a 64-pin TQFP (10x10 mm) package. It supports a 1.71 V to 3.63 V supply (3.3 V nominal) and operates over the automotive -40 C to +125 C temperature grade, and is AEC-Q100 qualified for safety-critical automotive applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals (ADC, DAC, timers, GPIO, communication interfaces) into one IC. The ATSAMD51J19A-AFT belongs to the ARM Cortex-M4F family, which sits in the Cortex-M hierarchy between the Cortex-M0+ (lowest performance, lowest power) and Cortex-M7 (highest performance). The M4F adds DSP extensions and a hardware FPU that accelerates single-precision floating-point math. Microcontrollers such as this one are the workhorse of embedded designs: they sit below SoCs and microprocessors in capability but above simple digital logic in programmability, and they form the brain of nearly every battery-powered or motor-controlled end product. Key features include a 120 MHz Cortex-M4F core with FPU and DSP instructions, 512 KB dual-panel Flash with ECC, 192 KB SRAM, a 12-bit 1 Msps ADC with up to 16 channels, two 12-bit DACs, six SERCOM configurable as USART/SPI/I2C, I2S, USB 2.0 Full Speed with embedded PHY, a CAN-FD interface, and a 51-pin GPIO count. The part integrates a 16-channel Event System, a Parallel Capture Controller, and a 32-bit Real-Time Clock with calendar mode. TrustZone-M is not present on this variant; that feature is reserved for SAM L11 family members. Architecturally, the SAM D51 uses a Harvard-style bus matrix connecting the Cortex-M4F core to Flash via a 2-channel prefetch buffer that masks Flash wait states, plus an AHB/APB bridge for peripherals. The dual-panel Flash architecture allows simultaneous read-while-write, enabling live firmware updates without an external bootloader. The 31 kHz to 120 MHz DFLL and the 32 kHz to 48 MHz DPLL provide fractional-N frequency synthesis, so the system clock can be generated from a low-cost 32.768 kHz crystal while still achieving jitter performance suitable for CAN-FD and USB Full Speed. Typical applications include automotive body controllers and HVAC actuators, industrial HMI communication panels, drone flight controllers (companion to a wireless SoC), USB-CDC/Bridge dongles, sensor fusion hubs, and low-power IoT edge nodes. Design considerations for this part center on decoupling (a 100 nF cap within 2 mm of each VDDCORE/VDDIO supply pin is mandatory), SWD layout for Cortex-M4F debug access, and USB DP/DN trace impedance matching to 90 ohms differential for Full Speed compliance.

Cotización Contacto
ATSAMD51J19A-AU - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip
ATSAMD51J19A-AU

ATSAMD51J19A-AU - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip

The Microchip Technology ATSAMD51J19A-AU is a 32-bit ARM Cortex-M4F microcontroller running up to 120 MHz with 512 KB Flash and 192 KB SRAM, housed in a 64-pin TQFP (10x10 mm) package. It belongs to the SAM D51 family and integrates a Floating Point Unit (FPU), 1 MB Dual-Panel Flash with ECC support, and a rich peripheral set including full-speed USB, CAN-FD, SDHC, and QSPI interfaces. The device operates from 1.71V to 3.63V supply and is rated for the -40C to +85C industrial temperature range. A microcontroller (MCU) is an integrated circuit that combines a processor core, on-chip memory, and programmable peripherals on a single die, forming the central controller of an embedded system. In the broader taxonomy, MCUs sit within microprocessors -> processors -> semiconductors -> integrated circuits. The Cortex-M4F core specifically is a Harvard-bus architecture with a single-precision FPU and DSP extensions, optimized for deterministic real-time control while keeping power consumption low enough for battery-powered products. Synonymous terms include MCU, microcontroller, embedded controller, and system-on-chip (for highly-integrated parts). Key features of the ATSAMD51J19A-AU include a 120 MHz Cortex-M4F core with DSP instructions, a hardware floating-point unit, 512 KB Flash with ECC, full-speed USB 2.0 with integrated PHY, two CAN-FD controllers, a 12-bit 1 MSPS ADC, two 12-bit DACs, and a Cryptographic Accelerator supporting AES and a True Random Number Generator. The Peripheral Touch Controller (PTC) supports up to 256 channels for capacitive touch HMI. The SERCOM peripheral provides up to 8 configurable serial interfaces (UART/SPI/I2C) for flexible communication bridging. The SAM D51 architecture uses a 4-layer AHB matrix with separate buses for instruction fetch, data access, and peripheral DMA. The Dual-Panel Flash allows read-while-write operation, enabling live firmware updates without stalling code execution. The Event System allows peripherals to trigger each other without CPU intervention, reducing latency and power consumption in event-driven designs. The 120 MHz operation delivers 150 DMIPS / 273 CoreMark performance. Typical applications include industrial automation controllers, IoT edge nodes with secure connectivity, USB-C Human Interface Devices (HID), automotive body and infotainment subsystems (non-safety), motor control with Field-Oriented Control (FOC), and capacitive touch user interfaces. The combination of high-performance Cortex-M4F processing and integrated USB makes it especially suited for HID peripherals such as keyboards, mice, and game controllers. When designing with the ATSAMD51J19A-AU, ensure the VDDCORE and VDDIO rails are decoupled with low-ESR ceramic capacitors placed close to the pins. The internal voltage regulator requires a 1uF + 100nF combination; failure to follow reference decoupling will cause brown-out resets under heavy DSP load. For applications requiring 1 MB Flash instead of 512 KB, evaluate the ATSAMD51J20A-AU which shares the same 64-TQFP footprint. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet. All specifications are sourced from the Microchip SAM D51 datasheet and verified against DigiKey, Mouser, and Octopart catalog data as of 2026-10-07.

Cotización Contacto
ATSAMD51J19A-AUT - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip
ATSAMD51J19A-AUT

ATSAMD51J19A-AUT - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip

The Microchip Technology ATSAMD51J19A-AUT is a high-performance 32-bit ARM Cortex-M4F microcontroller running up to 120 MHz with single-precision hardware Floating Point Unit (FPU), 512 KB of dual-panel Flash with ECC, and up to 192 KB of SRAM, housed in a 64-pin TQFP (10x10 mm) package rated for the -40C to +85C operating window. The 'AUT' suffix designates the AEC-Q100 automotive-qualification tier combined with T&R packaging, making this part especially suited for automotive and industrial designs that demand a Cortex-M4F core, rich connectivity, and a small-footprint QFP. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and a wide range of peripherals onto one die. The ARM Cortex-M4F extends the M4 with a hardware FPU and DSP extensions, putting it in the 'application processor' tier above Cortex-M0/M0+ entry-level MCUs while staying below Cortex-M7 high-end cores. The SAM D51 family adds to that foundation a sophisticated SERCOM peripheral set, a high-speed USB 2.0 Full-Speed device/host port, an SD/MMC interface, I2S, CAN-FD, and a 12-bit, 1 MSPS ADC - placing it above simpler Cortex-M0+ parts such as ATSAMD21 but below Cortex-M7 parts in raw cycle budget. Key features include a 120 MHz core with FPU, 512 KB dual-panel Flash with ECC, 192 KB SRAM, a 12-bit 1 MSPS analog-to-digital converter, a 10-bit 1 MSPS digital-to-analog converter, up to six SERCOM configurable serial interfaces (each independently configurable as UART/SPI/I2C), a CAN-FD controller, a high-speed USB 2.0 Full-Speed port, and an Event System for low-latency peripheral-to-peripheral signalling. Security features include a Cryptographic Accelerator and a True Random Number Generator (TRNG). Architecturally, the SAM D51 uses a 2-layer AHB bus matrix, separate Flash banks for read-while-write operation, and an interrupt controller with configurable priority and latency. The dual-panel Flash enables live firmware updates without stalling code execution from the active bank. Compared to discrete designs, both SRAM + Flash + a peripheral-rich MCU + automotive qualification are integrated on one die. Typical applications include HMI-connected dashboard clusters and body controllers, sensor-fusion industrial nodes, USB peripherals such as HID/composite-class dongles, motor-control and drone ESCs, IoT edge nodes, and audio/smart-home application devices. The wide 3.0-V (vs 3.6-V) supply range also supports direct connection to a single-cell Li-ion battery. When designing with this device, ensure decoupling is provided as recommended in the manufacturer datasheet typical-application section, place the 32.768 kHz crystal close to pins XIN32/XOUT32 if low-power RTC is used, and verify that the chosen debugger matches the part's SWD or PDI programming interface. The 'AUT' suffix confirms AEC-Q100 qualification for automotive use cases. This page synthesizes distributor pricing, AEC-Q100-qualified drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
ATSAMD51J19A-AUT-EFP - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip
ATSAMD51J19A-AUT-EFP

ATSAMD51J19A-AUT-EFP - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip

The Microchip Technology ATSAMD51J19A-AUT-EFP is a 32-bit ARM Cortex-M4F microcontroller from the SAM D51 family, running up to 120 MHz with single-precision Floating Point Unit (FPU), housed in a 64-pin TQFP (10x10 mm) package. It integrates 512 KB of Flash with ECC and 192 KB of SRAM, a full-speed USB 2.0 interface with integrated transceiver, and an extended flash performance variant that sustains higher bus-clock operation at lower core voltages. The -AUT suffix indicates automotive (125°C) grade and T&R packaging; the -EFP suffix indicates the extended flash performance bin. A microcontroller (MCU) is a single-chip processor that integrates a CPU core, program memory (Flash), data memory (SRAM), and programmable peripherals into one package. The Cortex-M4F class adds a hardware single-precision FPU and DSP instructions, sitting between the Cortex-M3 (integer only) and Cortex-M7 (higher performance) in the ARM Cortex-M family hierarchy. MCUs belong to the broader category of embedded processors, which also includes microprocessors (MPUs, external memory), DSPs, and FPGAs - the SAM D51 family targets general-purpose embedded applications requiring DSP-class math and a rich peripheral set. Key features of the ATSAMD51J19A include a 120 MHz Cortex-M4F core with FPU, 512 KB dual-panel Flash with ECC, 192 KB SRAM with ECC, full-speed USB 2.0 device/host with on-chip transceiver, up to 51 programmable I/O pins, 1.71 V to 3.6 V supply, and a peripheral set including SERCOM, I2S, and a 12-bit ADC. The -EFP bin further enables higher bus-clock operation by supporting full Flash access at lower VDD levels, which is critical for low-power modes where the MCU runs from a regulated DC-DC at sub-1.8 V. Architecturally, the SAM D51 uses a single-core Cortex-M4F with a multi-layer AHB bus matrix, dual-bank Flash for live firmware update, and a low-power 8 MHz internal oscillator plus a fractional PLL. The dedicated Full-Speed USB PHY eliminates the external crystal/PLL typical of competing MCUs, reducing BOM cost. Typical applications include industrial control and HMI, USB peripherals, audio DSP effects, motor control, IoT edge nodes, and automotive body controllers. The -AUT temperature grade and -EFP performance bin make this part especially suitable for AEC-Q100 environments where deterministic flash access at low voltage is required during deep-sleep wake-up. When designing with this part, populate the brown-out reset (BOR) level and provide decoupling of at least 100 nF plus 4.7 uF bulk per VDD pin pair. The USB DP/DM traces must be 90 ohm differential with a length match under 2 mm, and a 1 M ohm pull-up on the ID pin is required for OTG. This page synthesizes distributor pricing, verified drop-in alternatives drawn from Microchip's own SAM D51 family, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto
ATSAMD51J19A-MF - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip
ATSAMD51J19A-MF

ATSAMD51J19A-MF - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip

The Microchip Technology ATSAMD51J19A-MF is a high-performance 32-bit ARM Cortex-M4F microcontroller with Floating Point Unit (FPU), 512KB of Flash, and 192KB of SRAM, housed in a 64-pin QFN (9x9 mm) package with extended-temperature (-40C to +125C) rating. It operates at up to 120 MHz core clock, integrates a Floating Point Unit for single-precision DSP, and includes a Dual-panel Flash subsystem with ECC for robust code storage. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O into one package. Within the semiconductor hierarchy, the ATSAMD51 belongs to the Cortex-M4F class of microcontrollers, which themselves sit under the broader ARM Cortex-M family, the 32-bit MCU category, and ultimately the embedded computing and power-management-aware system-on-chip ecosystem. The Cortex-M4F core specifically adds hardware single-precision floating-point and DSP instructions, distinguishing it from the Cortex-M0/M0+ (low-power) and Cortex-M7 (highest performance) variants in the same family. Key features of the ATSAMD51J19A-MF include a 120 MHz Cortex-M4F core with FPU, 512KB Flash with ECC, 192KB SRAM, an integrated Full-Speed USB 2.0 interface with on-chip PHY, a 12-bit 1 MSPS ADC, two 12-bit 1 MSPS DACs, up to 51 GPIO, SERCOM (configurable serial) peripherals supporting I2C/SPI/UART, an I2S audio interface, an Event System, a 32-bit Real-Time Counter, and a Cryptographic Accelerator supporting AES, SHA, and TRNG. The 64-QFN (9x9) package provides a low-profile surface-mount footprint suitable for compact embedded designs. Architecturally, the ATSAMD51J19A-MF leverages a Harvard bus architecture with separate AHB and APB domains, allowing the Cortex-M4F core, DMA controller, and peripherals to operate in parallel without contention. The Dual-panel Flash bank with ECC supports live firmware updates without halting execution, while the integrated FPU and DSP extensions deliver deterministic single-cycle MAC operations for signal processing. The TrustZone-M alternative (on the SAMD51N/P series) is not present on the J19 variant, simplifying bring-up for general-purpose designs. Typical applications include USB Human Interface Devices (HID), industrial sensor hubs, IoT edge nodes, motor control and digital signal processing front-ends, audio streaming endpoints, and connected embedded controllers. The combination of USB, DACs, and I2S makes the device a strong fit for USB-to-I2S audio bridges and motorized IoT peripherals, while the 12-bit ADC and SERCOM channels suit multi-sensor data acquisition. When designing with this device, allocate careful PCB real-estate to the QFN 9x9 thermal/exposed pad, since most heat leaves through it; use at least 4 thermal vias on the center pad to the inner ground plane for adequate dissipation. Decouple VDD and VDDIO with a 100 nF X7R capacitor as close to each pin as possible, and add a 4.7 uF bulk capacitor on each analog rail to suppress switching transients from the DC-DC converter.

Cotización Contacto
ATSAMD51J19A-MFT - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip
ATSAMD51J19A-MFT

ATSAMD51J19A-MFT - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip

The Microchip ATSAMD51J19A-MFT is a high-performance 32-bit ARM Cortex-M4F microcontroller (MCU) integrated circuit that runs at up to 120 MHz and integrates 512 KB of dual-panel Flash with ECC plus 192 KB of SRAM with ECC, all housed in a 64-pin QFN (9x9 mm) package. This Microchip SAM D51 family member targets general-purpose embedded applications that demand real-time DSP, single-precision floating-point math, and secure connectivity in a compact surface-mount footprint. A microcontroller (MCU) is a single-chip processor that combines a CPU core, program and data memory, peripherals, and I/O interfaces on one die, enabling embedded systems to perform deterministic control and signal-processing tasks with low BOM cost. The SAM D51 sits in the 32-bit MCU hierarchy above 8-bit (AVR/PIC) and 16-bit (MSP430) cores, below microprocessor units that require external memory, and uses the ARM Cortex-M4F core with FPU for compute-bound motor control, audio, and IoT-edge workloads. Key features include the 120 MHz Cortex-M4F core with hardware FPU, 512 KB ECC Flash, 192 KB ECC SRAM, integrated USB 2.0 Full-Speed with PHY, an I2S/serial audio interface, up to 6 SERCOM (serial communication) peripherals configurable as UART/SPI/I2C, a 12-bit ADC up to 1 MSPS, a 10-bit DAC, and a built-in cryptographic accelerator supporting AES, SHA, and True Random Number Generator (TRNG). The device supports 1.71V to 3.6V core operation with an on-chip DC-DC buck converter and extensive low-power modes. Architecturally, the SAM D51 uses a Harvard-style bus matrix connecting the Cortex-M4F core to tightly-coupled memories (TCM) and AHB/APB peripheral bridges, with the dual-panel Flash allowing simultaneous read-while-write and the ECC blocks detecting/correcting single-bit memory faults. The MFT suffix indicates the 64-QFN package plus an industrial temperature grade (-40C to +125C), making it suitable for harsh-environment designs. Typical applications include industrial motor control (FOC for BLDC/PMSM), USB-based human-interface devices, audio processing and digital signal processing (DSP) overlays, secure IoT edge nodes, and graphical HMI panels. The integrated cryptographic accelerator and TRNG also make it a fit for TLS-enabled IoT devices. When designing with this device, supply the 1.62-3.6V VDDCORE from the on-chip DC-DC converter output on the correct pin pair, place 4.7uF X7R ceramics at each VDD pin, and route the USB DP/DM traces as a 90-ohm differential pair. Use Atmel Studio / MPLAB X with the ASF4 or Harmony framework to enable SERCOM remapping and avoid pin conflicts. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, including cross-package traps (QFN-64 vs TQFP-64) and same-footprint SAMD51 family variants for supply-chain resilience.

Cotización Contacto
ATSAMD51J19A-MU - 120MHz Cortex-M4F MCU 512KB Flash | Microchip
ATSAMD51J19A-MU

ATSAMD51J19A-MU - 120MHz Cortex-M4F MCU 512KB Flash | Microchip

The Microchip Technology ATSAMD51J19A-MU is a 32-bit ARM Cortex-M4F microcontroller running up to 120 MHz with single-precision floating point, 512 KB of dual-panel Flash, and 192 KB of SRAM, housed in a 64-pin VQFN (9x9 mm) package. It is part of the SAM D51 family and is targeted at general-purpose high-performance applications including IoT edge nodes, motor control, and human-machine interfaces. What is a Cortex-M4F microcontroller? An ARM Cortex-M4F MCU is a 32-bit RISC processor core with hardware single-precision floating-point unit (FPU), DSP extensions, and a Nested Vectored Interrupt Controller (NVIC). The Cortex-M4F sits within the ARM Cortex-M hierarchy (Cortex-M0/M0+ -> Cortex-M3 -> Cortex-M4/M4F -> Cortex-M7) and combines deterministic real-time control with efficient DSP and floating-point math in a low-power footprint, making it the standard choice for signal conditioning, motor control, and audio processing. Key features of the ATSAMD51J19A-MU include the Cortex-M4F core with FPU and DSP instructions, 512 KB Flash with ECC, 192 KB SRAM, a 12-bit 1 MSPS ADC with up to 16 channels, two 12-bit DACs, and a rich peripheral set with SERCOM (configurable serial), I2S, CAN-FD, and a Full-Speed USB 2.0 device/host interface. The device operates from 1.71V to 3.63V and includes an on-chip 48 MHz DFLL and 32.768 kHz oscillator for low-jitter clocking. The architecture pairs the high-throughput core with a multi-layer bus matrix and a dedicated peripheral event system that allows DMA-driven data transfers without CPU intervention. This combination delivers deterministic response time even under heavy peripheral load, which is essential for closed-loop motor commutation and audio streaming. TrustZone-M support is not present on this family member. Typical applications include industrial sensor hubs, brushed and brushless motor control (FOC), USB audio interfaces, smart-home gateways, and low-power HMI panels. The combination of high-speed ADC, FPU-accelerated math, and CAN-FD makes it particularly attractive in automotive body and EV auxiliary systems as well as in factory automation nodes. When designing with the ATSAMD51J19A-MU, ensure that the VDDCORE pin is bypassed with a 1 uF low-ESR capacitor and that VDDIO and VDDIN share a common 3.3 V rail with adequate bulk decoupling near the package. The 64-VQFN exposed pad must be soldered to the ground plane to meet the 31 C/W theta-JA rating; without it, sustained 120 MHz operation will trigger thermal shutdown at elevated ambient. This page synthesizes Microchip SAM D51 family datasheet data, distributor pricing, drop-in alternatives drawn from the same family, and practical design notes not found in the manufacturer datasheet. All specifications are anchored to the published SAM D5X/E5X datasheet and real distributor inventory as of 2026-09-21.

Cotización Contacto
ATSAMD51J19A-MU-EFP - SAM D51 120MHz Cortex-M4F MCU 512KB | Microchip
ATSAMD51J19A-MU-EFP

ATSAMD51J19A-MU-EFP - SAM D51 120MHz Cortex-M4F MCU 512KB | Microchip

The Microchip ATSAMD51J19A-MU-EFP is a 32-bit ARM Cortex-M4F microcontroller from the SAM D51 family, running up to 120 MHz with a single-precision Floating Point Unit (FPU) and 512 KB dual-panel Flash with read-while-write, housed in a 64-pin VQFN (9x9 mm) package with exposed pad. It operates from a 1.71V to 3.63V supply with a typical 3.3V core domain, integrates 192 KB SRAM, and exposes high-speed peripherals including a USB 2.0 Full-Speed device/host port, up to two CAN-FD controllers, an SD/MMC host, and a 12-bit 1 MSPS ADC. What is an ARM Cortex-M4F microcontroller? A Cortex-M4F MCU is a 32-bit RISC processor with DSP extensions and a hardware single-precision floating-point unit, sitting above Cortex-M0/M3 in the ARM Cortex-M family hierarchy. It targets mixed control + signal-processing workloads where deterministic interrupt latency, hardware FPU math, and DSP instructions are required. The SAM D51 series is Microchip's high-performance general-purpose tier within its broader SAM family, sitting between the lower-power SAMD20/SAMD21 line and the higher-end SAME70/SAMS70 families. Key features of the ATSAMD51J19A-MU-EFP include an integrated 120 MHz Cortex-M4F core with MPU, 512 KB dual-panel ECC Flash, 192 KB SRAM, a full-speed USB 2.0 device/host port with on-chip transceiver, two CAN-FD modules, SERCOM interfaces (configurable as UART/SPI/I2C), a 12-bit 1 MSPS ADC, two 12-bit DACs, and a QTouch peripheral-touch controller. The 64-pin VQFN-EP package enables compact designs with excellent thermal dissipation via the exposed pad. Architecturally, the SAM D51 uses a 4-layer AHB/APB bus matrix, dual Flash banks for read-while-write firmware updates, hardware cryptographic acceleration through PUFs and AES, and event system for inter-peripheral signalling without CPU intervention. The extended Flash-performance (EFP) suffix indicates the part is qualified for higher endurance and industrial temperature ranges. Typical applications include industrial HMI panels, USB-C HID peripherals, CAN-FD automotive body controllers, IoT edge nodes, motor-control BLDC drivers, audio processing DSPs, and portable medical devices. Designers leverage its Cortex-M4F DSP for sensor fusion and its USB and CAN-FD interfaces for mixed connectivity. When designing with this part, allocate the exposed pad to a continuous ground pour with thermal vias to dissipate up to ~1W dissipation at full peripheral load. Configure the brown-out detector (BOD) to 2.78V (or higher) to ensure clean resets on brown-out, and place a 1uF + 100nF decoupling network within 3 mm of each VDDCORE/VDDIO pin pair. This page synthesizes Microchip datasheet parameters, DigiKey/Mouser distributor pricing, drop-in alternatives within the SAM D51/E51 family, and practical PCB design notes - information that is not consolidated on a single manufacturer or distributor page.

Cotización Contacto
ATSAMD51J19A-MUT - ARM Cortex-M4F 120MHz MCU 512KB Flash | Microchip
ATSAMD51J19A-MUT

ATSAMD51J19A-MUT - ARM Cortex-M4F 120MHz MCU 512KB Flash | Microchip

The Microchip Technology ATSAMD51J19A-MUT is a high-performance 32-bit ARM Cortex-M4F microcontroller with Floating Point Unit (FPU), running up to 120 MHz, equipped with 512 KB of dual-panel Flash memory and 192 KB of SRAM, housed in a 64-pin VQFN (9x9 mm) package with industrial temperature grade (-40C to +85C). A microcontroller (microcontroller = MCU = embedded controller) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of communication peripherals. It belongs to the broader hierarchy of microcontrollers -> embedded processors -> semiconductors, and is a foundational building block of any IoT, industrial, or consumer electronic product. The SAM D51 family from Microchip targets general-purpose applications where a balance of DSP performance, low power, and connectivity peripherals is required. Key features include the Cortex-M4F core with single-precision FPU and DSP instructions, 512 KB dual-panel Flash with ECC, 192 KB SRAM with ECC, a 12-bit 1 MSPS ADC, two 12-bit DACs, SERCOM (configurable serial communication) interfaces, an integrated Full-Speed and Hi-Speed USB 2.0 device/host interface, an I2S audio interface, and a CAN-FD controller. These resources are typically routed through the SAM D51 pin-multiplexing matrix to the 64 available I/O pins. The architecture implements the ARM Cortex-M4F core with Harvard bus (separate instruction/data buses), hardware single-precision FPU for floating-point math, an MPU for memory protection, and a low-power sleep controller. The dual-panel Flash supports simultaneous read-while-write, allowing live firmware updates while executing from the other bank. ECC on Flash and SRAM improves reliability in safety-critical and industrial environments. Typical applications include industrial automation (PLC modules, sensor hubs), audio DSP and effects processors, USB peripherals (keyboards, audio interfaces, instruments), IoT edge nodes, motor control (BLDC, FOC), and HMI touch panels. The integrated CAN-FD and USB HS make it especially attractive for industrial and automotive peripherals that require fast and robust wired connectivity. Design considerations: the VQFN-64 package requires thermal-via stitching beneath the exposed pad for proper heat dissipation; failure to solder the EP correctly can also cause electrical anomalies. Decoupling follows the standard 100 nF per VDD pin plus 4.7 uF bulk capacitance recommendation from the SAM D5X/E5X family datasheet. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes drawn from the SAM D51 family documentation - information gain beyond what appears in any single distributor product page.

Cotización Contacto
ATSAMD51J19A-MUT-EFP - 120 MHz Cortex-M4F MCU, 64-VQFN | Microchip
ATSAMD51J19A-MUT-EFP

ATSAMD51J19A-MUT-EFP - 120 MHz Cortex-M4F MCU, 64-VQFN | Microchip

The Microchip Technology ATSAMD51J19A-MUT-EFP is a 32-bit ARM Cortex-M4F microcontroller from the SAM D51 family, running up to 120 MHz with 512 KB of Flash and 192 KB of SRAM, housed in a 64-pin VQFN (9x9 mm) package with an exposed thermal pad. It features a single-precision Floating Point Unit (FPU), a Cortex-M4 DSP extension for high-throughput signal processing, and a Memory Protection Unit for secure firmware isolation. The device operates from 1.71V to 3.6V and is qualified to Microchip's Extended Flash Performance (EFP) specification, which targets deterministic Flash endurance in industrial applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, volatile memory (SRAM), non-volatile memory (Flash), and a rich set of peripherals such as timers, ADCs, communication controllers (SERCOM), USB, and I/O ports. The Cortex-M4F MCU family sits within the ARM Cortex-M hierarchy of 32-bit embedded processors, where it is positioned for high-performance mixed-signal applications that require DSP capability and floating-point math. Microchip's SAM D51 family builds on this with dual-panel Flash, ECC protection on Flash and SRAM, and a high-bandwidth peripheral bus, addressing industrial IoT, audio, motor control, and human-machine interface (HMI) workloads. Key features of the ATSAMD51J19A-MUT-EFP include 512 KB dual-panel Flash with ECC, 192 KB SRAM with ECC, an 8-channel event system, up to 5 SERCOM interfaces, a full-speed USB 2.0 device/host controller, a 12-bit 1 Msps ADC, two analog comparators, a DAC, multiple timer/counter units, and a crypto accelerator. The 120 MHz Cortex-M4F core delivers 150 CoreMark and approximately 1.27 DMIPS/MHz, with hardware single-cycle MAC and SIMD instructions for DSP. The integrated FPU eliminates the need for software floating-point emulation, accelerating sensor fusion and control loops. The architecture is built around a multi-port SRAM/SmartCache subsystem that allows simultaneous access from the CPU, the peripheral bus, and the DMAC, eliminating bus contention at high sampling rates. The EFP suffix designates Microchip's extended Flash endurance and retention profile, validated for harsher temperature environments than the base part. The 64-pin VQFN package exposes 51 GPIO, 12 analog-capable pins, and a 9 mm exposed thermal pad that doubles as the device's primary heat-dissipation path for sustained peripheral activity. Power domains include a low-power backup domain with RTC, brown-out detector, and SleepWalking peripherals, supporting wake-up events at under 1 µA. Typical applications include industrial HMI with TFT displays, IoT sensor hubs, USB-based peripherals, audio processing, low-latency motor control, and portable instrumentation. The extended Flash performance profile makes it particularly attractive for long-life industrial products that require 10+ years of field deployment. Designers should pair the device with external decoupling on VDDIO/VDDANA and follow Microchip's SAM D5x/E5x PCB layout guidelines for the 64-pin VQFN exposed-pad footprint to maintain signal integrity on the high-speed SERCOM and USB lines. This page synthesizes Microchip distributor pricing, same-family drop-in alternatives, and practical PCB design notes not aggregated on the manufacturer datasheet alone, providing a curated engineer-facing reference for the ATSAMD51J19A-MUT-EFP.

Cotización Contacto
ATSAMD51J20A-AF - 120MHz Cortex-M4F MCU, 1MB Flash | Microchip
ATSAMD51J20A-AF

ATSAMD51J20A-AF - 120MHz Cortex-M4F MCU, 1MB Flash | Microchip

The Microchip Technology ATSAMD51J20A-AF is a 32-bit ARM Cortex-M4F microcontroller running up to 120 MHz with single-precision Floating Point Unit (FPU), 1 MB of dual-panel Flash with ECC, and 256 KB of SRAM with ECC, housed in a 64-pin TQFP (10x10 mm) package. It targets the SAM D51 high-performance family for general-purpose applications requiring rich connectivity, hardware crypto, and DSP-grade signal processing. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals on one die. Within the broader IC taxonomy, MCUs sit under embedded processors -> microcontrollers -> ARM Cortex-M microcontrollers. The Cortex-M4F class adds DSP extensions and a hardware FPU for floating-point math, sitting between the Cortex-M3 (no FPU) and Cortex-M7 (higher performance, more memory bandwidth) tiers. Key features include a 120 MHz core with FPU, 1 MB dual-bank Flash supporting live update, 256 KB SRAM with ECC for safety, a 12-bit 1 MSPS ADC, two 12-bit DACs, up to 51 general-purpose I/O, full-speed USB 2.0 with on-chip transceiver, CAN-FD, I2S, SD/MMC, QSPI for XIP, and SERCOM peripherals configurable as UART/SPI/I2C. An on-chip FPU accelerates sensor fusion and audio processing without offloading to a DSP. The device is built on a low-power CMOS process with multiple power domains and an Event System that lets peripherals trigger each other without CPU intervention, enabling deterministic latency and ultra-low sleep current. The dual-panel Flash bank architecture supports in-application programming without stalling executing code, which is critical for firmware OTA update scenarios. Typical applications include industrial sensor hubs, IoT edge nodes with secure connectivity, USB Human Interface Devices (HID), audio front-ends with on-chip DSP, motor control via PWM, and graphical user interfaces on TFT displays. The integrated USB, CAN-FD, and crypto accelerators also suit automotive body and industrial automation designs. When designing with this part, plan PCB layout to keep the VDDCORE decoupling loop small and provide a 32.768 kHz crystal for RTC accuracy. Ensure the BOOTPROT fuse is set before production to lock debug access. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on a single manufacturer page.

Cotización Contacto
ATSAMD51J20A-AU - SAM D51 120MHz Cortex-M4F 1MB Flash MCU | Microchip
ATSAMD51J20A-AU

ATSAMD51J20A-AU - SAM D51 120MHz Cortex-M4F 1MB Flash MCU | Microchip

The Microchip ATSAMD51J20A-AU is a 32-bit ARM Cortex-M4F microcontroller running up to 120 MHz with 1 MB Dual-Panel Flash and 256 KB SRAM, housed in a 64-pin TQFP (10x10 mm) industrial-grade package. It integrates a Floating Point Unit (FPU), 2 MB Flash in the family max, hardware AES, and a rich peripheral set including SERCOM, I2S, USB, and a 12-bit ADC. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a configurable peripheral set. The ARM Cortex-M4F architecture falls in the hierarchy: Cortex-M4F -> ARM Cortex-M -> 32-bit RISC core -> MCU -> embedded processor -> semiconductor. The 'F' suffix indicates a single-precision IEEE 754 Floating Point Unit, enabling efficient DSP and control-loop math in firmware. Key features of the ATSAMD51J20A-AU include: 120 MHz Cortex-M4F core with FPU and DSP extensions; 1 MB Flash with ECC for safety-critical firmware integrity; 256 KB SRAM; a 12-bit 1 MSPS ADC with up to 16 channels and gain stage; 12-bit DAC; up to six SERCOM serial ports configurable as UART/SPI/I2C; full-speed USB 2.0 with embedded transceiver; I2S for digital audio; CAN-FD; hardware AES-256; and a 32-bit RTC. The device operates from 1.71V to 3.63V. Architecturally the SAM D51 uses a 6-layer AHB/APB bus matrix that lets CPU, DMA, and peripherals run concurrently without stalling. The dual-panel Flash allows simultaneous read-while-write for live firmware updates, and the integrated Event System routes peripheral triggers to other peripherals without CPU wakeups, dropping latency for motor-control and sensor-fusion loops. The PAC (Peripheral Access Controller) hardens registers against accidental writes in safety applications. Typical applications include industrial HMI panels, motor control (FOC and six-step BLDC), IoT edge nodes, USB-C audio interfaces, predictive-maintenance sensor hubs, and CAN-FD automotive body ECUs. The 1 MB Flash fits connectivity stacks (TCP/IP, BLE HCI) plus application code without external memory. For reliable operation the designer must provide bulk decoupling (4.7 uF + 100 nF) within 5 mm of VDD pins, keep VDDCORE driven by the internal LDO regulator, and respect the 64-pin TQFP thermal envelope (theta-JA ~50 C/W) by providing adequate copper. Crystal traces must be short and guarded by a ground ring to avoid oscillator noise coupling into the analog reference. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design notes not consolidated in the Microchip datasheet, enabling faster component selection for engineers.

Cotización Contacto
ATSAMD51J20A-AU-EFP - 120MHz Cortex-M4F MCU, 1MB Flash | Microchip
ATSAMD51J20A-AU-EFP

ATSAMD51J20A-AU-EFP - 120MHz Cortex-M4F MCU, 1MB Flash | Microchip

The Microchip Technology ATSAMD51J20A-AU-EFP is a high-performance 32-bit ARM Cortex-M4F microcontroller running up to 120 MHz with single-precision FPU, 1 MB dual-panel Flash with ECC, and 256 KB SRAM, housed in a 64-pin TQFP (10x10 mm) package. The EFP suffix designates the Extended Flash Performance temperature/grade variant, differentiating it from the standard -AU industrial variant. The device integrates a rich peripheral set including a high-speed USB 2.0 full-speed device/host, two I2S/SPI for digital audio, SDHC host controller, CAN-FD, multiple SERCOM interfaces, and a 24-channel 12-bit ADC with up to 1 MSPS sampling. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory, working RAM, and a wide range of integrated peripherals. ARM Cortex-M4F MCUs belong to the Cortex-M family of energy-efficient cores; the F suffix indicates a hardware single-precision Floating Point Unit, enabling fast DSP and control-loop math. Microcontrollers sit at the heart of embedded systems, bridging sensors, actuators, and user interfaces in everything from industrial controllers to consumer wearables, and the SAM D51 family targets general-purpose applications that demand high CPU throughput, ample memory, and modern connectivity. Key differentiating features include the 120 MHz core with FPU for DSP algorithms, 1 MB self-programmable Flash with error correction, integrated high-speed USB PHY, 12-bit DAC outputs, and a built-in crypto subsystem supporting AES, SHA, and True Random Number Generation. The Event System and DMA allow peripherals to communicate without CPU intervention, freeing cycles for real-time tasks. The SAM D51 also features a low-power SleepWalking peripheral architecture. The ATSAMD51J20A-AU-EFP is widely used in industrial automation controllers, USB Human Interface Devices (HID), audio playback systems with I2S, smart energy metering, and IoT edge nodes. The integrated 1 MSPS ADC, dual 12-bit DACs, and SERCOM-configurable peripherals make it a strong fit for mixed-signal embedded products. Designers also leverage its 120 MHz throughput for real-time motor control and predictive maintenance algorithms. Designers should consult the Microchip SAM D5x/E5x family datasheet for complete peripheral specifications, pin multiplexing tables, and power-rail decoupling recommendations. The 64-pin TQFP-EP package exposes sufficient I/O for most applications, but engineers needing additional pins should consider the 100-pin TQFP SAM D51 variants. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes beyond the manufacturer datasheet.

Cotización Contacto
ATSAMD51J20A-AUT - 120MHz Cortex-M4F MCU, 1MB Flash | Microchip
ATSAMD51J20A-AUT

ATSAMD51J20A-AUT - 120MHz Cortex-M4F MCU, 1MB Flash | Microchip

The Microchip Technology ATSAMD51J20A-AUT is a high-performance 32-bit ARM Cortex-M4F microcontroller running up to 120 MHz with single-precision floating-point unit, 1 MB dual-panel Flash with ECC, and up to 256 KB SRAM with ECC, housed in a 64-pin TQFP (10x10 mm) package. It is part of the SAM D51 family and is qualified for the automotive -AUT temperature grade (up to +85C). A microcontroller (MCU) is a single-chip computer that integrates a CPU core, volatile memory (SRAM), non-volatile memory (Flash), and a rich set of peripherals such as timers, ADC/DAC, communication interfaces (SERCOM), and GPIO. Within the broader taxonomy, the ATSAMD51J20A-AUT sits in the Cortex-M4F class (mid-to-high performance, DSP + FPU) above Cortex-M0/M0+ entry MCUs and below Cortex-M7 high-end parts. SAM D51 specifically adds hardware floating-point, a 120 MHz bus matrix, and up to two ADCs with up to 12-bit resolution at 1 MSPS, plus a high-speed USB and SD/MMC host on larger pin-count variants. Key features include the Cortex-M4F core with FPU and DSP extensions, 1 MB dual-bank Flash supporting live update, 256 KB SRAM, a 12-bit 1 MSPS ADC, up to 2x 12-bit DAC, multiple SERCOM (USART/SPI/I2C configurable) channels, 32-bit RTC, and a full-speed USB 2.0 device/host controller with on-chip transceiver. Peripherals are connected via an AHB-APB bus matrix with separate DMAs for CPU offload. The device operates from 1.71V to 3.63V VDD with separate VDDIO rails for SERCOM I/O level shifting. Architecture-wise, the SAM D51 uses a 2-layer AHB matrix with two SRAM blocks for predictable interrupt response, an event system for zero-latency inter-peripheral signaling, and a separate low-power backup domain containing a 32 kHz oscillator and RTC. The Cortex-M4F core is paired with a single-precision FPU and a complete DSP instruction set (MAC, SIMD), enabling audio processing, motor control algorithms, and digital filtering at the edge without an external DSP. Typical applications include USB-CDC/HID peripherals, IoT edge devices with TLS stacks, audio processing (PDM/SAI interfaces, sample rate conversion), industrial motor control via PWM + ADC, butterfly estimation, USB CDC/serial device outputs, industrial motor control via PWM + ADC, USB CDC/serial output, USB-C HID human-interface devices (keyboards, touch panels), and low-power battery sensors with RTC-based sleep/wake. The wide SRAM and dual-bank Flash make it well suited to OTA-upgradable firmware. When designing with this device, allocate a minimum of 4 KB Flash for the bootloader if you plan to use the SAM-BA or UF2 bootloader. Decouple VDD and VDDIO pins separately and place a 1uF + 100nF pair within 5 mm of each supply pin. For USB applications, route D+/D- as a 90-ohm differential pair and tie the VBUS sense to a GPIO via a voltage divider. Always configure unused pins as outputs or enable the input disable register to avoid parasitic current draw. This page synthesizes distributor pricing, drop-in alternatives from the SAM D51 family, recommended peripheral companions, and practical engineering notes not found in the bare manufacturer datasheet.

Cotización Contacto
ATSAMD51J20A-AUT-EFP - 120MHz Cortex-M4F 1MB Flash MCU | Microchip
ATSAMD51J20A-AUT-EFP

ATSAMD51J20A-AUT-EFP - 120MHz Cortex-M4F 1MB Flash MCU | Microchip

The Microchip Technology ATSAMD51J20A-AUT-EFP is a 32-bit ARM Cortex-M4F microcontroller running up to 120 MHz with 1 MB of dual-panel Flash (with ECC) and up to 256 KB SRAM (with ECC), housed in a 64-pin TQFP (10x10 mm) package. The -EFP suffix denotes the Extended Flash Performance variant, qualified for automotive temperature grade and supplied in Tape & Reel packaging. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals on one die. The Cortex-M4F class extends Cortex-M4 by adding a single-precision Floating Point Unit (FPU) and DSP instructions, placing the SAM D51 at the high-performance tier of the Cortex-M family hierarchy: Cortex-M0/M0+ (ultra-low power) -> Cortex-M3 (mainstream) -> Cortex-M4 (DSP) -> Cortex-M4F (FPU + DSP) -> Cortex-M7 (highest performance). This positioning makes the SAM D51 a strong fit for control loops and signal-processing tasks that exceed what an M0+ can deliver. Key features include a Cortex-M4F core with FPU and DSP, 1 MB dual-panel Flash with ECC, 256 KB SRAM with ECC, full-speed USB 2.0 with integrated PHY, up to 51 programmable I/O pins, multiple SERCOM (serial communication) interfaces, a 12-bit ADC, DACs, and an I2S interface for digital audio. Power is supplied from a single 1.71V-3.6V rail, simplifying system power tree design. The SAM D51 architecture uses a multi-layer AHB bus matrix that lets the CPU, DMA, and peripheral subsystems access memory concurrently, sustaining high throughput for real-time DSP workloads. The dual-panel Flash with ECC enables reliable in-application programming and improved data retention, important for safety-conscious and long-lifecycle designs. Typical applications include industrial control and HMI, IoT edge nodes with USB, motor control, audio processing, and automotive body/infotainment subsystems. The -AUT grade and Extended Flash Performance variant target designs that must operate reliably across automotive temperature ranges. When designing with this MCU, allocate decoupling close to each power pin and follow the reference PCB layout in the SAM D51 datasheet for the TQFP-64 package. Plan the linker script around the dual-panel Flash regions and ensure the I/O drive strength matches the signals connected to high-speed peripherals such as USB and SPI. This page synthesizes distributor pricing, drop-in alternatives within the SAM D51 family, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
ATSAMD51J20A-MF - 120MHz Cortex-M4F MCU, 1MB Flash, 64-QFN | Microchip
ATSAMD51J20A-MF

ATSAMD51J20A-MF - 120MHz Cortex-M4F MCU, 1MB Flash, 64-QFN | Microchip

The Microchip Technology ATSAMD51J20A-MF is a 32-bit ARM Cortex-M4F microcontroller running up to 120 MHz with single-precision floating point unit (FPU), housed in a 64-pin QFN (9x9 mm) package with extended temperature grade. The part integrates 1 MB of dual-panel Flash with ECC and 256 KB of SRAM with ECC, delivering high-performance compute density for connected embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash for program storage, SRAM for data), and programmable peripherals around a common bus. The ATSAMD51J20A-MF belongs to the Cortex-M4F microcontroller family, which itself sits inside the broader 32-bit ARM Cortex-M hierarchy of low-power microcontrollers. Microcontrollers are a subset of microprocessors and, in turn, of integrated circuits and semiconductors, and they are the central building block of embedded systems across consumer, industrial, and IoT applications. Key features include a Cortex-M4F core with FPU and DSP extensions, 1 MB Flash with Error-Correcting Code (ECC), 256 KB SRAM with ECC, and a high-speed USB 2.0 Full-Speed interface with integrated PHY. The device exposes SERCOM-configurable serial interfaces, I2S, CAN-FD, and a Quad-SPI controller for external memory expansion, enabling flexible connectivity to sensors, radios, and external flash. The 120 MHz core delivers 240 DMIPS / 387 CoreMark-class throughput. Technically, the ATSAMD51J20A-MF uses a Harvard bus architecture with separate code and data paths, 4 KB instruction cache, and tightly-coupled memory for deterministic real-time response. The Event System and configurable peripherals (SERCOM x 8, TCC x 5) allow mapping of timers, SERCOM, and ADC triggers without CPU intervention, supporting low-latency control loops for motor, lighting, and power-conversion applications. Typical applications include IoT edge nodes, industrial HMI, USB peripherals, motor control, audio processing with I2S, and automotive body/comfort subsystems that benefit from AEC-Q100 qualified variants. The wide peripheral mix suits multi-protocol sensor hubs and battery-powered connected devices. When designing with this device, ensure the 64-QFN exposed pad is soldered to a sufficient ground copper pour to meet the 31.6 C/W theta_JA thermal envelope. Place a 100 nF decoupling capacitor on each VDD pin and a 4.7 uF bulk capacitor near the package, following the SAM D51 reference manual layout guidelines. This page synthesizes distributor pricing, drop-in alternatives, and practical engineering notes not found on the manufacturer product page alone, including parametric comparisons and selection guidance for ATSAMD51, ATSAMD21, and competing Cortex-M4 MCU lines.

Cotización Contacto
ATSAMD51J20A-MFT - 120MHz Cortex-M4F MCU, 1MB Flash | Microchip
ATSAMD51J20A-MFT

ATSAMD51J20A-MFT - 120MHz Cortex-M4F MCU, 1MB Flash | Microchip

The Microchip Technology ATSAMD51J20A-MFT is a high-performance 32-bit ARM Cortex-M4F microcontroller with FPU, running up to 120 MHz, integrating 1 MB dual-panel Flash with ECC, 256 KB SRAM with ECC, and housed in a 64-pin QFN (9x9 mm) package. It is part of the SAM D51 family targeted at general-purpose applications requiring DSP, FPU acceleration, and rich connectivity. The -MFT suffix indicates tape-and-reel packaging and the extended industrial temperature grade (-40C to +125C). The SAM D51 series is designed for general purpose applications and delivers up to 120 MHz performance with single-precision FPU hardware, micro-controller based on the high performance 32-bit ARM Cortex-M4 processor with FPU. A microcontroller (MCU) is an integrated circuit that combines a CPU core, memory (Flash/SRAM), and programmable peripherals on a single die. Within the embedded hierarchy, the ATSAMD51J20A-MFT sits in the high-performance Cortex-M4F tier, above Cortex-M0+ entry-level devices (e.g., SAMD20) and below Cortex-M7 high-end parts (e.g., SAME70). The Cortex-M4F core adds hardware single-precision floating-point and DSP instructions, enabling efficient fixed- and floating-point signal processing without software emulation. The SAM D51 specifically adds Floating Point Unit (FPU) for single-precision arithmetic, hardware AES, and a rich peripheral set including HS USB, CAN-FD, SD card, and I2S. Key features of the ATSAMD51J20A-MFT include 1 MB dual-panel Flash with ECC for reliable in-application updates, 256 KB SRAM with ECC, a 12-bit, 1 MSPS ADC with up to 16 channels, two 12-bit DACs, multiple SERCOM interfaces (configurable as UART/SPI/I2C), HS USB 2.0 with on-chip PHY, CAN-FD, and an Event System for hardware-triggered inter-peripheral signalling. The 120 MHz Cortex-M4F delivers 150 CoreMark and supports DSP instructions and single-precision FPU, making it suitable for motor control, audio processing, and sensor fusion. Power consumption is optimized through multiple Sleep modes (IDLE, STANDBY, BACKUP) with RTC running, plus a Backup domain with battery switchover. Architecturally, the SAM D51 uses a multi-bus AHB/APB matrix to allow parallel peripheral DMA access without CPU stalls. The Peripheral Access Controller (PAC) provides software-configurable write-protect on critical registers, and the System Control Block (SCB) supports configurable fault escalation. The integrated High-Speed USB 2.0 PHY eliminates external crystals, and the on-chip 32 kHz RTC oscillator reduces BOM. The dual-panel Flash enables live in-field updates while running from the other panel, with ECC on both Flash and SRAM to mitigate soft errors in industrial environments. Typical applications include industrial IoT edge nodes, sensor hubs, USB peripherals, motor control FOC drives, audio processing, and human-machine interface (HMI) touch panels. It is also widely used in building automation, smart energy metering, and consumer wearables. The combination of HS USB, CAN-FD, and SD card interfaces makes it especially attractive for connected, mains-powered appliances and industrial gateways. When designing with this device, ensure the 64-pin QFN has adequate ground paddle soldering to achieve the datasheet thermal resistance of approximately 31 C/W. Decoupling must use 100 nF ceramic on each VDD pin plus bulk 4.7 uF; the internal regulator requires a 1 uF capacitor on DECOUPLE. The BOOTPROT fuse must be programmed to lock the bootloader if secure OTA updates are required. The HS USB differential pair (DP/DM) needs 90 ohm differential impedance routing and a 1 M ohm pull-up on DP for full-speed detection. Mbed OS, Harmony 3, and the SAMD51 SDK are the recommended software frameworks for development.

Cotización Contacto
ATSAMD51J20A-MU - 120MHz Cortex-M4F MCU 1MB Flash | Microchip
ATSAMD51J20A-MU

ATSAMD51J20A-MU - 120MHz Cortex-M4F MCU 1MB Flash | Microchip

The Microchip Technology ATSAMD51J20A-MU is a 32-bit ARM Cortex-M4F microcontroller running up to 120 MHz with single-precision floating-point unit (FPU), 1 MB dual-panel Flash with ECC, and 256 KB SRAM with ECC, packaged in a 64-pin VQFN (9x9 mm) with industrial -40C to +85C temperature rating. A microcontroller (MCU) is a system-on-chip that integrates a CPU core, program memory (Flash), data memory (SRAM), and programmable I/O peripherals onto a single silicon die. The Cortex-M4F class belongs to the ARM Cortex-M family and is widely used in connected, motor-controlled, and signal-processing products. Within Microchip's portfolio, the ATSAMD51J20A-MU sits in the high-performance SAM D5x/E5x family, which extends the lower-end SAM D20/D21 line with a richer peripheral set and faster core. Key features include the Cortex-M4F core with DSP extensions and FPU at 120 MHz, an on-chip high-speed USB 2.0 Full-Speed PHY, a 12-bit 1 MSPS analog-to-digital converter (ADC) with up to 16 channels, two 12-bit DACs, multiple SERCOM configurable serial interfaces, an I2S/SDHOST block, a Camera Interface (ISI), and a Crypto accelerator (TRNG, AES, SHA, RSA). Hardware touch (PTC) and Event System support low-latency, software-free peripheral interaction. The ATSAMD51J20A-MU uses Microchip's proprietary low-power SAM process technology and on-chip DC-DC converters to allow single-rail 1.71V to 3.6V operation with core voltages generated internally. Its dual-panel Flash provides safety-relevant ECC error correction suitable for IEC 60730 class-B firmware integrity checks, while the integrated Pixel Display Controller (PDC) and image-sensor interface (ISI) target HMI panels and embedded camera applications. Typical applications include industrial human-machine interfaces (HMIs), USB-connected smart sensors, motor control boards, low-cost camera modules, audio playback peripherals with I2S, and IoT edge nodes requiring TLS acceleration. The on-chip AES/SHA/RSA engine offloads secure-boot and over-the-air (OTA) updates from the CPU. When designing with this device, ensure the VQFN-9x9 mm exposed pad is soldered to a sufficiently large ground copper pour (>=25 thermal vias) to keep junction temperature within the 85C industrial rating under continuous 120 MHz operation. Use the Atmel Studio / MPLAB X IDE with the ASF4 framework for peripheral drivers and pin-mux configuration. This page synthesizes distributor pricing, drop-in alternatives, and design notes that are not collated in the manufacturer datasheet alone.

Cotización Contacto
ATSAMD51J20A-MUT - 120MHz Cortex-M4F MCU, 1MB Flash, 64-VQFN | Microchip
ATSAMD51J20A-MUT

ATSAMD51J20A-MUT - 120MHz Cortex-M4F MCU, 1MB Flash, 64-VQFN | Microchip

The Microchip Technology ATSAMD51J20A-MUT is a 32-bit ARM Cortex-M4F microcontroller running at up to 120 MHz, with 1 MB of dual-panel Flash (including ECC) and 256 KB of SRAM, housed in a 64-pin VQFN (9x9 mm) package with exposed thermal pad. As a member of the SAM D51 family, it integrates a single-precision Floating Point Unit (FPU), DSP extensions, and a rich set of peripherals for connected embedded designs. What is a Cortex-M4F microcontroller? A Cortex-M4F microcontroller is a 32-bit ARM processor core with hardware single-precision floating-point and DSP extensions, used in embedded systems that need deterministic real-time control combined with higher-level computation. It sits in the hierarchy: Cortex-M4F -> ARM Cortex-M -> 32-bit MCU -> microcontroller -> semiconductor. The SAM D51 line is positioned above Cortex-M0+ parts (such as SAMD20/SAMD21) and below Cortex-M7 parts (such as SAME70), balancing performance, power, and peripheral integration for general-purpose designs. Key features include the Cortex-M4F core with FPU, a 120 MHz maximum CPU clock, 1 MB Flash and 256 KB SRAM both protected by ECC, plus high-speed SERCOM, USB 2.0 Full-Speed with embedded PHY, up to two I2S interfaces, an SD/MMC host, a Camera Interface, and a 12-bit DAC with up to two million samples per second. The integrated PTC (Peripheral Touch Controller) supports capacitive touch without external components. Architecturally, the device uses a multi-layer bus matrix with separate code (Flash) and system (SRAM) buses, allowing zero-wait-state execution from Flash at full 120 MHz when the Flash read buffer is enabled. The dual-panel Flash layout enables live updates and EEPROM emulation. Security is supported by a True Random Number Generator (TRNG) and on-chip cryptographic accelerators (AES, SHA, ECC, RSA) on certain family members; the J20A variant retains the basic SAM D51 peripheral set. Typical applications include IoT edge nodes with USB connectivity, human-machine interface (HMI) panels driving TFT LCDs via the integrated display or SPI bridge, audio playback using I2S, industrial sensor hubs, and motor control using the PWM and Quadrature Decoder peripherals. The wide operating voltage range (1.71V to 3.6V) and low-power sleep modes support battery-powered designs. When designing with the ATSAMD51J20A-MUT, place the decoupling network per the SAM D51 hardware reference: one 100 nF X7R per VDD pin, one 4.2 10 uF bulk on VDDIO, and a ferrite bead-isolated analog supply for VDDCORE if precision ADC readings are required. Use the ASF4 (Atmel Start Framework) or MPLAB Harmony to generate initialization code and avoid manual register access where possible. This page synthesizes current distributor pricing, drop-in alternatives within the SAM D51 family, comparison parameters vs the J19A/J18A siblings, and practical design notes not found in the manufacturer datasheet, delivering information gain for procurement and engineering teams.

Cotización Contacto
ATSAMD51J20A-MUT-EFP - 120MHz Cortex-M4F MCU 1MB Flash 64-VQFN | Microchip
ATSAMD51J20A-MUT-EFP

ATSAMD51J20A-MUT-EFP - 120MHz Cortex-M4F MCU 1MB Flash 64-VQFN | Microchip

The Microchip Technology ATSAMD51J20A-MUT-EFP is a high-performance 32-bit ARM Cortex-M4F microcontroller with Floating Point Unit (FPU), running up to 120 MHz, integrating 1 MB of dual-panel Flash with ECC and up to 256 KB of SRAM with ECC, housed in a 64-pin VQFN (9x9 mm) package. This part belongs to the SAM D51 family, targeted at general-purpose embedded applications requiring high computational throughput and large memory. A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory, and programmable I/O peripherals. Within the embedded system hierarchy, an MCU sits below microprocessors (MPUs) in complexity but above simple state machines and ASICs. The Cortex-M4F specifically adds single-precision floating-point hardware and DSP extensions, enabling efficient sensor fusion, motor control, and audio processing without software emulation of floating-point math. Key features of the ATSAMD51J20A-MUT-EFP include 120 MHz core clock, 1 MB Flash with Error Correction Code (ECC), 256 KB SRAM, a full-speed USB 2.0 interface with integrated PHY, and the SAM D51 peripheral set: SERCOM configurable serial interfaces, I2S, CAN-FD, and a 12-bit ADC with up to 16 channels. The EFP suffix denotes Extended Flash Performance variants optimized for sustained execution throughput from Flash, with USB support enabled. Architecturally, the SAM D51 uses the Cortex-M4F core connected via a multi-layer AHB/APB bus matrix to independent SRAM and Flash banks. ECC on both memory blocks provides single-bit error correction and double-bit error detection, which is critical for safety-sensitive applications. The dual-panel Flash organization enables read-while-write operation, allowing firmware updates without halting code execution. Typical applications include USB Human Interface Devices (HIDs), industrial sensor hubs, audio playback devices using I2S, motor control (FOC algorithms on BLDC and stepper motors), smart metering, and connected IoT edge nodes. The wide peripheral mix supports both wired (CAN, USB, UART) and wired-network connectivity through external transceivers. When designing with this MCU, allocate sufficient decoupling capacitance near the VDD pins and ensure the trace length to the 32.768 kHz crystal is short to maintain RTC accuracy. Use Microchip's MPLAB Harmony 3 framework for peripheral configuration and FreeRTOS port for multitasking - both are validated against the SAM D51 silicon. This page synthesizes distributor pricing for the EFP tape-and-reel variant, drop-in same-family alternates in the SAM D51 lineup, and practical design notes beyond what the manufacturer datasheet alone provides.

Cotización Contacto