AD526CD vs AD526CDZ Comparación
Comparación detallada lado a lado de AD526CD por Analog Devices y AD526CDZ por Analog Devices. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Analog Devices
AD526CD - 16-Ceramic-DIP Programmable Gain Amplifier | Analog Devices
AD526CD UnknownComparación de especificaciones
| Parámetro | AD526CD | AD526CDZ |
|---|---|---|
| Marca | Analog Devices | Analog Devices |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Unknown | Activo |
| Product Type | Single-ended monolithic software-programmable gain amplifier (SPGA) | — |
| Architecture | 1 amplifier circuit, single-ended | Single-ended monolithic SPGA |
| Available Gains | 1, 2, 4, 8, and 16 | — |
| Minimum Gain | 1 ratio | — |
| Maximum Gain | 16 ratio | — |
| Gain Control Interface | TTL-compatible latched inputs | — |
| External Gain-Setting Components | 0 components required | None required |
| Integrated Elements | 1 amplifier and 1 resistor network | — |
| Encapsulado | 16-CDIP, ceramic dual in-line package | 16-CDIP, 0.300 inch (7.62 mm) |
| Recuento de pines | 16 pins | — |
| Tipo de montaje | Through-hole | Through-hole |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | -40°C to +85°C |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | ±4.5 V to ±16.5 V |
| Input Signal Type | Single-ended | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Gain Error | [DATA_NEEDED: gain error] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | 24 V/µs |
| Small-Signal Bandwidth | [DATA_NEEDED: small-signal bandwidth] | — |
| Noise Performance | [DATA_NEEDED: input noise specification] | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Amplifier Type | — | Programmable gain amplifier |
| Number of Amplifiers | — | 1 circuit |
| Programmable Gain Settings | — | 1, 2, 4, 8, and 16 |
| Gain Error at Gain 1 | — | 0.02% maximum, C grade |
| Gain Error at Gain 16 | — | 0.5% maximum, C grade |
| Bandwidth | — | 4 MHz |
| Control Input Compatibility | — | TTL-compatible latched inputs |
| Cascade Gain Range | — | Up to 256 with two chips |
| Packaging | — | Tube |