AD974BRSZ vs AD974BRZ Comparación
Comparación detallada lado a lado de AD974BRSZ por Analog Devices y AD974BRZ por Analog Devices. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | AD974BRSZ | AD974BRZ |
|---|---|---|
| Marca | Analog Devices | Analog Devices |
| Categoría | ADC/DAC | ADC/DAC |
| Estado del ciclo de vida | Activo | Activo |
| Product Type | 4-channel data-acquisition ADC | — |
| Resolución | 16 bit | 16 bit |
| Maximum Sampling Rate | 200 ksps | — |
| Number of Analog Input Channels | 4 channels | — |
| Converter Architecture | Successive-approximation switched-capacitor ADC | — |
| Tensión de alimentación | 5 V | +5 V |
| Internal Reference Voltage | 2.5 V | — |
| Input Range 1 | 0 V to 4 V | — |
| Input Range 2 | 0 V to 5 V | — |
| Input Range 3 | -10 V to +10 V | — |
| Digital Interface | Serial interface | — |
| Analog Input Multiplexer | 4-channel internal multiplexer | — |
| Power-Down Mode | Yes | Supported |
| Power Supply Count | 1 | — |
| Encapsulado | 28-pin SSOP | 28-pin SOIC, 0.295 inch / 7.50 mm width |
| Tipo de montaje | Surface mount | Surface mount |
| Estado RoHS | [DATA_NEEDED: RoHS compliance status] | RoHS compliant |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Digital Input Logic Levels | [DATA_NEEDED: digital input logic levels] | — |
| Analog Input Input Impedance | [DATA_NEEDED: analog input impedance] | — |
| Total Unadjusted Error | [DATA_NEEDED: total unadjusted error] | — |
| Integral Nonlinearity | [DATA_NEEDED: integral nonlinearity] | — |
| Differential Nonlinearity | [DATA_NEEDED: differential nonlinearity] | — |
| Signal-to-Noise Ratio | [DATA_NEEDED: signal-to-noise ratio] | — |
| ENOB | [DATA_NEEDED: effective number of bits] | — |
| Typical Power Dissipation | [DATA_NEEDED: typical power dissipation] | — |
| Power-Down Current | [DATA_NEEDED: power-down current] | — |
| ADC Type | — | Successive-approximation switched-capacitor ADC |
| Frecuencia de muestreo | — | 200 kSPS |
| Analog Input Channels | — | 4 single-ended channels |
| Input Multiplexer | — | Integrated 4-channel analog multiplexer |
| Internal Reference | — | +2.5 V |
| Unipolar Input Range 1 | — | 0 V to +4 V |
| Unipolar Input Range 2 | — | 0 V to +5 V |
| Bipolar Input Range | — | ±10 V |
| Interfaz | — | High-speed serial interface |
| Maximum Power Dissipation | — | 120 mW |
| Factory Calibration | — | Factory calibrated to minimize linearity and offset errors |
| Lead-Free Status | — | Lead free |
| Analog Input Impedance | — | [DATA_NEEDED: analog input impedance] |