ADM2461EBRWZ-RL vs ADM2565EBRNZ-RL7 Comparación
Comparación detallada lado a lado de ADM2461EBRWZ-RL por Analog Devices y ADM2565EBRNZ-RL7 por Analog Devices. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Analog Devices
ADM2461EBRWZ-RL - 500kbps Isolated RS-485/RS-422 Transceiver | ADI
ADM2461EBRWZ-RL ✓ ActivoAnalog Devices
ADM2565EBRNZ-RL7 - 3kV Isolated RS-485 Transceiver, 25Mbps | ADI
ADM2565EBRNZ-RL7 ✓ ActivoComparación de especificaciones
| Parámetro | ADM2461EBRWZ-RL | ADM2565EBRNZ-RL7 |
|---|---|---|
| Marca | Analog Devices | Analog Devices |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $4,10 | $8,74 |
| Product Type | Isolated RS-485 / RS-422 Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half Duplex | — |
| Maximum Data Rate | 500 kbps | — |
| Isolation Voltage (rms) | 5.7 kV rms | — |
| ESD Protection (Bus Pins) | ±15 kV IEC (HBM:Human Body Model per IEC 61000-4-2) | — |
| Receiver Hysteresis | 30 mV typical | — |
| Unit Load | 1/8 (up to 256 nodes) | — |
| Supply Voltage - Logic Side (VDD1) | 3.0 V to 5.5 V | — |
| Supply Voltage - Bus Side (VDD2) | 3.0 V to 5.5 V (isolated, supplied by internal DC-DC driver) | — |
| Common-Mode Voltage Range | -25 V to +25 V | — |
| Temperatura de funcionamiento | -40C to +85C | [DATA_NEEDED: operating temperature range] |
| Encapsulado | 16-SOIC_W (Wide Body, 7.5 mm creepage) | 28-BSSOP wide-body SOIC_W_FP, 10.15 mm x 10.05 mm |
| Tipo de montaje | Surface Mount | Surface Mount |
| Nivel MSL | 3 | [DATA_NEEDED: MSL rating] |
| Estado RoHS | Compliant | Compliant |
| Función | — | Signal and power isolated RS-485 transceiver (half-duplex) |
| Velocidad de datos | — | 25 Mbps (max) |
| Isolation Voltage | — | 3 kV rms |
| CMTI | — | 250 kV/us |
| Bus ESD Protection | — | +/-15 kV IEC 61000-4-2 air discharge |
| Standards Compliance | — | ANSI/TIA/EIA-485-A-98; ISO 8482:1987 (E) |
| Number of Nodes / Unit Loads | — | [DATA_NEEDED: number of nodes supported] |
| Integrated Isolated Supply | — | Yes (isoPower DC-DC converter) |
| Canales | — | 4 (per DigiKey categorization) |
| Logic Supply Voltage | — | [DATA_NEEDED: VDD1 logic supply range] |
| Bus Supply Voltage | — | [DATA_NEEDED: VDD2 bus-side supply range] |
| Lead-Free | — | Yes |