ADM2561EBRNZ-RL7 vs ADM2563EBRNZ Comparación
Comparación detallada lado a lado de ADM2561EBRNZ-RL7 por Analog Devices y ADM2563EBRNZ por Analog Devices. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Analog Devices
ADM2561EBRNZ-RL7 - 3kV Isolated RS-485/RS-422 Transceiver | ADI
ADM2561EBRNZ-RL7 ✓ ActivoAnalog Devices
ADM2563EBRNZ - 3 kV Isolated RS-485 Transceiver, 28-SOIC-W-FP | Analog Devices
ADM2563EBRNZ ✓ ActivoComparación de especificaciones
| Parámetro | ADM2561EBRNZ-RL7 | ADM2563EBRNZ |
|---|---|---|
| Marca | Analog Devices | Analog Devices |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $9,07 | $12,21 |
| Función | Isolated RS-485/RS-422 transceiver (signal + power isolation) | — |
| Protocol | RS-422, RS-485 | RS-422, RS-485 (full-duplex) |
| Number of Drivers/Receivers | 1/1 (2/2 transceiver) | — |
| Duplex | Full / Half | — |
| Data Rate (max) | 25 Mbps | — |
| Isolation Voltage (RMS) | 3 kV RMS | 3 kV (UL 1577 / IEC 61010-1) |
| ESD Protection (bus pins) | ±15 kV IEC 61000-4-2 | — |
| Supply Voltage - Logic Side | 3 V to 5.5 V | — |
| Integrated Isolated DC-DC | Yes (isoPower) | — |
| Number of Nodes (bus) | 256 | — |
| Temperatura de funcionamiento | -40C to +85C | — |
| Encapsulado | 28-SOIC-W-FP (wide-body SOIC with exposed pad) | 28-SOIC-W-FP (wide-body SOIC, exposed pad) |
| Tipo de montaje | Surface Mount | — |
| Creepage / Clearance | 8 mm | — |
| Compliance | ANSI/TIA/EIA-485-A-98; ISO 8482:1987(E); UL 1577 | ANSI/TIA/EIA-485-A-98, ISO 8482:1987 (E) |
| Number of Drivers / Receivers | — | 1 / 1 |
| Velocidad de datos | — | 25 Mbps |
| VCC Supply Range | — | 3.0 V to 5.5 V |
| VIO Logic Supply Range | — | 1.7 V to 5.5 V |
| Isolated DC-DC Output (VISOOUT) | — | 3.3 V or 5 V selectable (VSEL) |
| IEC ESD (Bus Pins) | — | ±15 kV (IEC 61000-4-2, air / contact) |
| HBM ESD (Bus Pins) | — | ±25 kV |
| Common-Mode Range | — | −25 V to +25 V |
| Receiver Hysteresis | — | 30 mV |
| Quiescent Current (VCC, no load) | — | [DATA_NEEDED: quiescent current mA] |
| Rango de temperatura de funcionamiento | — | −40 °C to +85 °C |
| Estado RoHS | — | Compliant |