ADM485ARZ-REEL vs THVD1510DR Comparación
Comparación detallada lado a lado de ADM485ARZ-REEL por Analog Devices y THVD1510DR por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Analog Devices
ADM485ARZ-REEL - 5V 5Mbps Half-Duplex RS-485/RS-422 Transceiver | Analog Devices
ADM485ARZ-REEL ✓ ActivoTexas Instruments
THVD1510DR - 5V RS-485 Transceiver, ±18kV ESD, SOIC-8 | Texas Instruments
THVD1510DR ✓ ActivoComparación de especificaciones
| Parámetro | ADM485ARZ-REEL | THVD1510DR |
|---|---|---|
| Marca | Analog Devices | Texas Instruments |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $1,62 | $1,05 |
| Type | Transceiver | — |
| Protocol | RS-422, RS-485 | RS-485, RS-422 |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Tensión de alimentación | 5 V (single supply) | 4.5 V to 5.5 V |
| Velocidad de datos | 5 Mbps (max) | — |
| Receiver Hysteresis | [DATA_NEEDED: receiver hysteresis] | — |
| Common-Mode Range | -7 V to +12 V | ±25 V |
| Driver Differential Output | [DATA_NEEDED: VOD min/max] | — |
| Rango de temperatura de funcionamiento | -40 C to +85 C | — |
| Encapsulado | SOIC-8 (SO-8) / SO-8 | SOIC-8 (D), 3.90 mm body width |
| Tipo de montaje | Surface Mount | Surface Mount |
| ESD Protection | [DATA_NEEDED: ESD HBM rating] | — |
| Estado RoHS | Compliant | Compliant |
| REACH Status | Unaffected | — |
| Nivel MSL | 1 (Unlimited) | — |
| Compliance | ROHS3 Compliant | — |
| Enable Pins | Yes (DE driver enable, RE receiver enable, active-low/GPIO logic) | — |
| Product Type | — | RS-485/RS-422 Transceiver |
| Configuration | — | 1 Driver / 1 Receiver (Half-Duplex) |
| Signaling Rate | — | up to 10 Mbps |
| IEC ESD Protection (Bus) | — | ±18 kV (IEC 61000-4-2 contact/air) |
| HBM ESD Protection | — | ±16 kV (bus pins, per TI datasheet) |
| Fault Tolerance | — | ±70 V (bus pins) |
| Receiver Unit Load | — | 1/8 UL (up to 256 nodes) |
| Receiver Type | — | True Fail-Safe |
| Quiescent Current (typ) | — | less than 1 mA |
| Temperatura de funcionamiento | — | -40 C to +125 C |
| Recuento de pines | — | 8 |