ADM485JN vs SN75176 Comparación
Comparación detallada lado a lado de ADM485JN por Analog Devices y SN75176 por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
SN75176 - Differential Bus Transceiver RS-485/RS-422 | Texas Instruments
SN75176 ✓ ActivoComparación de especificaciones
| Parámetro | ADM485JN | SN75176 |
|---|---|---|
| Marca | Analog Devices | Texas Instruments |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Product Type | RS-485/RS-422 differential line transceiver | — |
| Tensión de alimentación | +5 V | — |
| Maximum Data Rate | 5 Mbit/s | — |
| Bus Common-Mode Range | +12 V | — |
| Driver Propagation Delay | 10 ns | — |
| Receiver Propagation Delay | [DATA_NEEDED: receiver propagation delay] | — |
| Driver Skew | Zero skew | — |
| Driver and Receiver Enable | Both driver and receiver can be enabled independently | — |
| Protection | Short-circuit protection and thermal shutdown protection | — |
| Process Technology | BiCMOS | — |
| Standards Compliance | EIA RS-485 and RS-422 | ANSI TIA/EIA-422-B, TIA/EIA-485-A, ITU V.11, ITU X.27 |
| Encapsulado | 8-pin PDIP | 8-pin PDIP (P) |
| Tipo de montaje | Through-hole | Through-Hole |
| Temperature Range | Commercial and industrial range | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Función | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Receiver Hysteresis | — | 50 mV (typical) |
| Supply Voltage (Vcc) | — | 4.75 V to 5.25 V |
| Temperatura de funcionamiento | — | 0 °C to +70 °C |
| Driver Output Current | — | ±60 mA (max) |
| Common-Mode Input Range | — | -7 V to +12 V |
| Differential Input Threshold | — | ±200 mV |
| Quiescent Supply Current (enabled) | — | 30 mA (typical) |
| Shutdown Supply Current | — | 1 µA (typical) |