ATMEGA644-20AU vs ATMEGA644PA-AUR Comparación

Comparación detallada lado a lado de ATMEGA644-20AU por Microchip Technology y ATMEGA644PA-AUR por Microchip Technology. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.

Microchip Technology
ATMEGA644-20AU ATMEGA644-20AU - 8-Bit AVR MCU 64KB Flash 20MHz | Microchip

ATMEGA644-20AU - 8-Bit AVR MCU 64KB Flash 20MHz | Microchip

ATMEGA644-20AU Nrnd
Microchip Technology
ATMEGA644PA-AUR ATMEGA644PA-AUR - 8-Bit AVR MCU 64KB Flash 20MHz TQFP-44 | Microchip

ATMEGA644PA-AUR - 8-Bit AVR MCU 64KB Flash 20MHz TQFP-44 | Microchip

ATMEGA644PA-AUR ✓ Activo

Comparación de especificaciones

Parámetro ATMEGA644-20AU ATMEGA644PA-AUR
Marca Microchip Technology Microchip Technology
Categoría Microcontrollers Microcontrollers
Estado del ciclo de vida NRND Activo
Estado del stock In Stock In Stock
Precio unitario (USD) $4,96 $1,78
Core Architecture 8-bit AVR RISC 8-bit AVR RISC (Harvard)
Program Memory 64 KB In-System Programmable Flash (32K x 16) —
SRAM 4 KB 4 KB
EEPROM 2 KB 2 KB
Frecuencia de reloj máxima 20 MHz 20 MHz
Throughput Up to 20 MIPS at 20 MHz —
Operating Voltage Range 2.7 V to 5.5 V —
General Purpose I/O Pins 32 —
General Purpose Working Registers 32 —
ADC 8-channel, 10-bit successive approximation 8-channel 10-bit
USART Interfaces 2 —
Timer/Counters 2 x 8-bit, 1 x 16-bit with compare and PWM modes —
Two-Wire Serial Interface 1 (byte-oriented, I2C compatible) —
SPI Interface 1 (master/slave) —
Encapsulado 44-TQFP (10x10 mm) 44-TQFP (10 x 10 mm)
Tipo de montaje Surface Mount Surface Mount
Rango de temperatura de funcionamiento -40C to +85C —
Debug Interface JTAG (IEEE 1149.1) with on-chip debug —
Sleep Modes 6 (Idle, ADC Noise Reduction, Power-save, Power-down, Standby, Extended Standby) —
Estado RoHS Compliant Compliant (GREEN)
Flash Memory (ISP) — 64 KB (32K x 16) with read-while-write
Maximum Throughput — 20 MIPS (1 MIPS per MHz)
Instructions — 131 instructions, mostly single-clock cycle
Hardware Multiplier — On-chip 2-cycle multiplier
General Purpose I/O — 32 lines
Working Registers — 32 general purpose
Timers/Counters — 3 flexible timer/counters with compare modes and PWM
USART — 2
Serial Interfaces — TWI (I2C-compatible), SPI
Real-Time Counter — Yes
Tensión de alimentación — 2.5 V / 3.3 V / 5 V operation
Low Power Technology — picoPower
Packaging — Tape & Reel (T/R)

Hojas de datos y recursos

Examinar todos los productos Crear BOM Solicitar cotización