ATMEGA88PA-PN vs ATMEGA88V-10PU Comparación
Comparación detallada lado a lado de ATMEGA88PA-PN por Microchip Technology y ATMEGA88V-10PU por Microchip Technology. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Microchip Technology
ATMEGA88V-10PU - 8KB AVR MCU 10MHz 5V PDIP-28 | Microchip
ATMEGA88V-10PU ✓ ActivoComparación de especificaciones
| Parámetro | ATMEGA88PA-PN | ATMEGA88V-10PU |
|---|---|---|
| Marca | Microchip Technology | Microchip Technology |
| Categoría | Microcontrollers | Microcontrollers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $2,02 | $1,30 |
| Core Architecture | AVR 8-bit RISC | — |
| Flash Memory | 8 KB (4K x 16) | 8 KB (4K x 16) ISP Flash |
| EEPROM | 512 B | 512 B |
| SRAM | 1 KB | 1 KB |
| Frecuencia de reloj máxima | 20 MHz | — |
| Supply Voltage Range | 1.8 V to 5.5 V | 1.8 V to 5.5 V |
| Temperatura de funcionamiento | -40C to +105C | — |
| Number of I/O Lines | 23 | — |
| ADC | 6-channel 10-bit | 10-bit |
| Timers | 3 (two 8-bit, one 16-bit) | — |
| Serial Interfaces | USART, TWI (I2C), SPI | — |
| Encapsulado | 28-PDIP (0.300 in, 7.62 mm) | 28-PDIP |
| Tipo de montaje | Through Hole | Through Hole |
| Programming / Debug | ISP FLASH, debugWIRE | — |
| Low Power Technology | picoPower with multiple sleep modes | picoPower |
| Life Cycle Stage | Active | — |
| Core Processor | — | AVR 8-bit RISC |
| Core Size | — | 8-Bit |
| Max Clock Speed | — | 10 MHz |
| General Purpose I/O | — | 23 lines |
| Working Registers | — | 32 x 8-bit |
| Instructions | — | 130 powerful instructions, most single-cycle |
| Timers/Counters | — | 3 flexible timer/counters with compare modes |
| Communication Interfaces | — | USART, SPI, Two-Wire (I2C) |
| In-System Programming | — | Yes (ISP, read-while-write) |
| On-Chip Debug | — | debugWIRE |
| Speed Grade | — | -10 (10 MHz) |
| Throughput | — | 1 MIPS per MHz |