ATSAMD51N20A-AU vs ATSAME51N20A-AU-EFP Comparación
Comparación detallada lado a lado de ATSAMD51N20A-AU por Microchip Technology y ATSAME51N20A-AU-EFP por Microchip Technology. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Microchip Technology
ATSAMD51N20A-AU - 120MHz Cortex-M4F MCU 1MB Flash 100-TQFP | Microchip
ATSAMD51N20A-AU ✓ ActivoMicrochip Technology
ATSAME51N20A-AU-EFP - 120MHz Cortex-M4F MCU, 1MB Flash | Microchip
ATSAME51N20A-AU-EFP ✓ ActivoComparación de especificaciones
| Parámetro | ATSAMD51N20A-AU | ATSAME51N20A-AU-EFP |
|---|---|---|
| Marca | Microchip Technology | Microchip Technology |
| Categoría | Microcontrollers | Microcontrollers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $8,49 | $8,10 |
| Core | ARM Cortex-M4F with FPU | ARM Cortex-M4F (with FPU) |
| Frecuencia de reloj máxima | 120 MHz | — |
| Flash Memory | 1 MB (1M x 8) dual-panel with ECC | — |
| SRAM | 256 KB with ECC | 256 KB |
| Operating Voltage | 1.71 V to 3.6 V | — |
| ADC | 12-bit, up to 1 MSPS, up to 32 channels | 12-bit, up to 1 Msps |
| DAC | Dual 12-bit DAC | 12-bit |
| USB | USB 2.0 Full-/High-Speed with on-chip PHY | — |
| Serial Interfaces | 6x SERCOM (UART/SPI/I2C/LIN) | — |
| Audio Interface | I2S | — |
| Memory Card Interface | SD/MMC host controller | — |
| Timers | 16-bit and 24-bit, with PWM/capture/quadrature | — |
| Analog Comparators | 3 | — |
| Temperatura de funcionamiento | -40C to +85C (industrial) | -40C to +85C |
| Encapsulado | 100-pin TQFP (14x14 mm) | 100-pin TQFP (14x14 mm) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Nivel MSL | 3 (168 hours) | — |
| Estado RoHS | Compliant | Compliant |
| Core Architecture | — | ARM 32-bit |
| Maximum CPU Clock | — | 120 MHz |
| Program Memory (Flash) | — | 1 MB (1M x 8) |
| Flash Type | — | Dual-Panel Flash with ECC |
| Operating Voltage (VDDIO) | — | 3.3 V |
| USB Interface | — | Full-Speed USB 2.0 with embedded PHY |
| CAN Interface | — | 2x CAN-FD controllers |
| Communication Interfaces | — | SERCOM (UART/SPI/I2C), I2S, RS-485 |
| Timers/PWM | — | 16-bit TCC (Timer/Counter for Control) |
| Debug Interface | — | SWD (Serial Wire Debug) |
| Series | — | SAM E51 / SAM E53 family |
| Suffix Designation | — | EFP = Extended Flash Performance silicon revision |