BTG70501EPLXUMA1 vs BTG7003A1EPWXUMA2 Comparación
Comparación detallada lado a lado de BTG70501EPLXUMA1 por Infineon y BTG7003A1EPWXUMA2 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Infineon
BTG7003A1EPWXUMA2 - 15.7A PROFET Wire Guard High-Side Switch | Infineon
BTG7003A1EPWXUMA2 ✓ ActivoComparación de especificaciones
| Parámetro | BTG70501EPLXUMA1 | BTG7003A1EPWXUMA2 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $1,45 | $2,20 |
| Switch Type | High-Side Power Switch (PROFET +2 12V) | High-Side Power Switch |
| Number of Channels | 1 | 1 |
| Input / Output Ratio | 1:1 | — |
| Configuración de salida | N-Channel High-Side | — |
| Current Limit (Typ.) | 3 A | — |
| Supply Voltage Vcc Range | 2.7 V to 28 V | — |
| Load-Dump Withstand | [DATA_NEEDED: load-dump transient rating] | — |
| On-State Resistance (Typ) | [DATA_NEEDED: Rdson value] | — |
| Operating Temperature (Tj) | -40 C to +150 C | — |
| Diagnostic Functions | Open-load, short-to-GND, short-to-Vbat, overtemperature | — |
| Current Limit Switch (CLS) Mode | Yes (for ADAS / power distribution) | — |
| Encapsulado | PG-TSDSO-14 (14-pin TSSOP with exposed pad) | PG-TSDSO-14-22 (exposed pad) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Qualification | AEC-Q100 (automotive) | — |
| Nivel MSL | [DATA_NEEDED: MSL rating] | — |
| Estado RoHS | Compliant | Compliant |
| Lead-Free | Yes | — |
| Configuration | — | 1:1 N-Channel |
| Maximum Continuous Load Current | — | 15.7 A |
| Operating Voltage Range | — | 6 V to 18 V |
| Load Dump Tolerance | — | 40 V |
| Idle Mode Quiescent Current | — | 50 µA |
| On-Resistance R_DS(on) | — | 10 mΩ (typ) |
| Control Input | — | Active High |
| Wire Protection | — | Integrated I²t |
| Functional Safety | — | ISO 26262 compliant |
| Temperatura de funcionamiento | — | -40C to +150C (TJ) |