BTS3011TEATMA1 vs BTS3046SDRATMA1 Comparación
Comparación detallada lado a lado de BTS3011TEATMA1 por Infineon y BTS3046SDRATMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | BTS3011TEATMA1 | BTS3046SDRATMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $0,51 | $0,74 |
| Product Type | Smart Low-Side Power Switch | Smart Low-Side Power Switch (HITFET family) |
| Number of Channels | 1 | — |
| On-Resistance R_DS(on) (typ.) | 11 mΩ | — |
| Continuous Load Current | 10 A | — |
| Operating Voltage Range | 3 V to 28 V | — |
| Switch Technology | N-channel vertical power MOSFET | — |
| Input Type | Logic-level CMOS compatible | — |
| Encapsulado | PG-TO252-5 (DPAK-5) | PG-TO252-3-11 (DPAK, 3-pin with tab) |
| Número de pines | 5 (4 + Tab) | — |
| Temperatura de unión de funcionamiento | -40 °C to +150 °C | — |
| ESD Protection (HBM) | ±8 kV (output pin) | — |
| AEC-Q100 Qualification | Grade 1 qualified | — |
| Integrated Protections | Current limit, overtemperature shutdown, overvoltage clamp, ESD, ground-loss protection | — |
| Diagnostic Output | Open-drain status feedback pin | — |
| Tipo de montaje | Surface Mount | Surface Mount |
| Estado RoHS | Compliant | — |
| Manufacturer | — | Infineon Technologies |
| Switch Configuration | — | 1:1 N-Channel, single channel |
| Continuous Output Current | — | 3.6 A |
| On-State Resistance (Rds(on)) | — | 95 mOhm (0.095 ohm) typical |
| Operating Voltage Range (Vbb) | — | 4.5 V to 42 V |
| Load Type | — | Low-side switch (ground-referenced load) |
| Rango de temperatura de funcionamiento | — | -40 C to +150 C |
| Protection Features | — | Over-temperature, short-circuit, over-current, over-voltage (clamp), ESD |
| Input Logic | — | CMOS-compatible with internal pull-down |
| Status Feedback | — | Yes (status output pin) |
| Automotive Qualification | — | AEC-Q100 (where variant specified) |
| RoHS / Lead-Free | — | Compliant / Yes |