BTS3046SDRATMA1 vs BTS3011TEATMA1 Comparación
Comparación detallada lado a lado de BTS3046SDRATMA1 por Infineon y BTS3011TEATMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | BTS3046SDRATMA1 | BTS3011TEATMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $0,74 | $0,51 |
| Product Type | Smart Low-Side Power Switch (HITFET family) | Smart Low-Side Power Switch |
| Manufacturer | Infineon Technologies | — |
| Switch Configuration | 1:1 N-Channel, single channel | — |
| Continuous Output Current | 3.6 A | — |
| On-State Resistance (Rds(on)) | 95 mOhm (0.095 ohm) typical | — |
| Operating Voltage Range (Vbb) | 4.5 V to 42 V | — |
| Load Type | Low-side switch (ground-referenced load) | — |
| Encapsulado | PG-TO252-3-11 (DPAK, 3-pin with tab) | PG-TO252-5 (DPAK-5) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Rango de temperatura de funcionamiento | -40 C to +150 C | — |
| Protection Features | Over-temperature, short-circuit, over-current, over-voltage (clamp), ESD | — |
| Input Logic | CMOS-compatible with internal pull-down | — |
| Status Feedback | Yes (status output pin) | — |
| Automotive Qualification | AEC-Q100 (where variant specified) | — |
| RoHS / Lead-Free | Compliant / Yes | — |
| Number of Channels | — | 1 |
| On-Resistance R_DS(on) (typ.) | — | 11 mΩ |
| Continuous Load Current | — | 10 A |
| Operating Voltage Range | — | 3 V to 28 V |
| Switch Technology | — | N-channel vertical power MOSFET |
| Input Type | — | Logic-level CMOS compatible |
| Número de pines | — | 5 (4 + Tab) |
| Temperatura de unión de funcionamiento | — | -40 °C to +150 °C |
| ESD Protection (HBM) | — | ±8 kV (output pin) |
| AEC-Q100 Qualification | — | Grade 1 qualified |
| Integrated Protections | — | Current limit, overtemperature shutdown, overvoltage clamp, ESD, ground-loss protection |
| Diagnostic Output | — | Open-drain status feedback pin |
| Estado RoHS | — | Compliant |