BTS3104SDRATMA1 vs BTS3046SDRATMA1 Comparación
Comparación detallada lado a lado de BTS3104SDRATMA1 por Infineon y BTS3046SDRATMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | BTS3104SDRATMA1 | BTS3046SDRATMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $0,84 | $0,74 |
| Product Type | Low-side power switch (HITFET family) | Smart Low-Side Power Switch (HITFET family) |
| Number of Channels | 1 | — |
| Configuración de salida | Low-side, N-channel | — |
| Drain-to-Source Voltage (V_DS) Max | 60 V | — |
| Continuous Drain Current (I_D) | 2 A | — |
| On-State Resistance (R_DS(on)) Typ | [DATA_NEEDED: R_DS(on) value] | — |
| Input Logic Level | CMOS-compatible (active-high) | — |
| Supply Voltage (V_IN) | [DATA_NEEDED: V_IN range] | — |
| Standby Current | [DATA_NEEDED: standby current] | — |
| Rango de temperatura de funcionamiento | -40 C to +150 C | -40 C to +150 C |
| Encapsulado | PG-TO252-3-11 (DPAK) | PG-TO252-3-11 (DPAK, 3-pin with tab) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Protection Features | Overtemperature, overcurrent, short-circuit, overvoltage, ESD | Over-temperature, short-circuit, over-current, over-voltage (clamp), ESD |
| Automotive Qualification | AEC-Q100 qualified | AEC-Q100 (where variant specified) |
| Estado RoHS | Compliant | — |
| Sin halógenos | Yes | — |
| Nivel MSL | 1 | — |
| Manufacturer | — | Infineon Technologies |
| Switch Configuration | — | 1:1 N-Channel, single channel |
| Continuous Output Current | — | 3.6 A |
| On-State Resistance (Rds(on)) | — | 95 mOhm (0.095 ohm) typical |
| Operating Voltage Range (Vbb) | — | 4.5 V to 42 V |
| Load Type | — | Low-side switch (ground-referenced load) |
| Input Logic | — | CMOS-compatible with internal pull-down |
| Status Feedback | — | Yes (status output pin) |
| RoHS / Lead-Free | — | Compliant / Yes |