BTS4142NHUMA1 vs BTS3035TFATMA1 Comparación
Comparación detallada lado a lado de BTS4142NHUMA1 por Infineon y BTS3035TFATMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | BTS4142NHUMA1 | BTS3035TFATMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $0,97 | $0,61 |
| Product Type | Smart High-Side Power Switch (Classic PROFET 24V) | Low-Side Power Switch |
| Number of Channels | 1 | 1 |
| Switch Topology | High-side, N-channel vertical MOSFET | — |
| Nominal Output Current | 1.4 A | — |
| On-State Resistance (RDS(on)) | 70 mOhm (typical) | — |
| Tensión de alimentación de funcionamiento | 6 V to 42 V | — |
| Load-Dump Protection | Yes (integrated overvoltage clamp) | — |
| Overload Protection | Yes (current limiting) | — |
| Thermal Protection | Yes (shutdown with auto-restart) | — |
| Undervoltage Shutdown | Yes (auto-restart with hysteresis) | — |
| ESD Protection (Input Pin) | Yes | — |
| Diagnostic Feedback | Yes (open-load, fault) | — |
| Encapsulado | PG-SOT223-4 | PG-TO252-3-313 (DPAK) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Temperatura de funcionamiento | -40C to +150C (junction) | — |
| Estado RoHS | Compliant | Compliant |
| Technology | — | N-Channel MOSFET |
| Input Type | — | CMOS Logic Level |
| Continuous Drain Current | — | 5 A |
| On-Resistance (RDS(on)) | — | 30 mOhm (typical) |
| Drain-Source Voltage (VDS) Max | — | 40 V |
| Operating Voltage Range | — | 12 V nominal (load-dump tolerant to 40 V) |
| Fault Protection | — | Over-current, Short-circuit, Over-temperature, ESD |
| Status Feedback | — | Yes (open-drain diagnostic output) |
| Reverse Battery Protection | — | Integrated |
| Rango de temperatura de funcionamiento | — | -40C to +150C (junction) |
| Nivel MSL | — | [DATA_NEEDED: MSL moisture sensitivity level] |
| Automotive Grade | — | AEC-Q100 qualified |