BTS500101LUAAUMA1 vs BTG7003A1EPWXUMA2 Comparación
Comparación detallada lado a lado de BTS500101LUAAUMA1 por Infineon y BTG7003A1EPWXUMA2 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Infineon
BTG7003A1EPWXUMA2 - 15.7A PROFET Wire Guard High-Side Switch | Infineon
BTG7003A1EPWXUMA2 ✓ ActivoComparación de especificaciones
| Parámetro | BTS500101LUAAUMA1 | BTG7003A1EPWXUMA2 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $2,33 | $2,20 |
| Product Type | Smart High-Side Power Switch | — |
| Technology | PROFET™ + 12/24/48V | — |
| Number of Channels | 1 | 1 |
| On-State Resistance (RDS(on)) | 1.0 mΩ (typical) | — |
| Continuous Load Current | 46 A | — |
| Supply Voltage (VS) Range | 3.1 V to 28 V | — |
| Logic Input Compatibility | 3.3 V / 5 V (active-high) | — |
| Rango de temperatura de funcionamiento | -40 °C to +150 °C (TJ) | — |
| Encapsulado | PG-HSOF-8-6 (TO-leadless) with exposed thermal pad | PG-TSDSO-14-22 (exposed pad) |
| Número de pines | 8 | — |
| Tipo de montaje | Surface Mount | Surface Mount |
| Protection Features | Short-Circuit Protection (SCP), Over-Temperature Protection (OTP), Over-Voltage Protection, Load-Dump, Reverse Battery | — |
| Diagnostic Output | Current sense (IS) pin | — |
| Diagnostic Enable Input | Yes (DEN, referenced to VS) | — |
| Estado RoHS | Compliant | Compliant |
| Switch Type | — | High-Side Power Switch |
| Configuration | — | 1:1 N-Channel |
| Maximum Continuous Load Current | — | 15.7 A |
| Operating Voltage Range | — | 6 V to 18 V |
| Load Dump Tolerance | — | 40 V |
| Idle Mode Quiescent Current | — | 50 µA |
| On-Resistance R_DS(on) | — | 10 mΩ (typ) |
| Control Input | — | Active High |
| Wire Protection | — | Integrated I²t |
| Functional Safety | — | ISO 26262 compliant |
| Temperatura de funcionamiento | — | -40C to +150C (TJ) |