BTS72004EPAXUMA1 vs BTS72002EPAXUMA1 Comparación
Comparación detallada lado a lado de BTS72004EPAXUMA1 por Infineon y BTS72002EPAXUMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | BTS72004EPAXUMA1 | BTS72002EPAXUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $0,65 | $1,28 |
| Product Family | PROFET+ 12V | — |
| Switch Type | Smart High-Side Switch | — |
| Number of Channels | 4 | 2 |
| Topología | 1:1 N-Channel High-Side | 2 x High-Side N-Channel (2:1 outputs) |
| Per-Channel Output Current (nominal) | 1 A | — |
| On-State Resistance (Rdson) per channel | 66.5 mOhm | — |
| Operating Supply Voltage (Vbb) | 6 V to 18 V | — |
| Input Logic Level | Active High | — |
| Rango de temperatura de funcionamiento | -40C to +150C | — |
| Protection Features | Overcurrent (OCP), Overvoltage, Undervoltage (UVP), Thermal Shutdown | Over-current, short-circuit, over-temperature, over-voltage, reverse polarity |
| Diagnostic Output | Current Sense (IS pin) | Current sense IS pin (analog) |
| Encapsulado | PG-TSDSO-14 (TSSOP-14-EP, 150 mil) | PG-TSDSO-14 (14-pin TSSOP with exposed pad) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Automotive Qualification | AEC-Q100 | AEC-Q100 |
| Estado RoHS | Compliant | Compliant |
| Product Type | — | Smart High-Side Power Switch (PROFET+2) |
| On-State Resistance (RDS(on)) | — | 66.5 mOhm per channel (typical) |
| Continuous Load Current | — | 1.2 A per channel |
| Limitación de corriente | — | 0.8 V to 1.2 A (adjustable) |
| Operating Voltage (VS) | — | 6 V to 18 V nominal, up to 28 V extended |
| Reverse Battery Capability | — | Yes, down to -28 V |
| Standby Current | — | [DATA_NEEDED: standby current in uA] |
| Temperatura de funcionamiento | — | -40 C to +150 C junction |
| Nivel MSL | — | 2A (4 weeks) |