CP2101R vs CP2102N-A01-GQFN28R Comparación
Comparación detallada lado a lado de CP2101R por Silicon Labs y CP2102N-A01-GQFN28R por Silicon Labs. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Silicon Labs
CP2102N-A01-GQFN28R - USB to UART Bridge QFN-28 | Silicon Labs
CP2102N-A01-GQFN28R ✓ ActivoComparación de especificaciones
| Parámetro | CP2101R | CP2102N-A01-GQFN28R |
|---|---|---|
| Marca | Silicon Labs | Silicon Labs |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $0,00 | $2,31 |
| Product Type | USB-to-UART bridge controller | USB to UART Bridge Controller |
| USB Interface | USB 2.0 | — |
| Tensión de alimentación | 3 V to 3.6 V | — |
| Serial Interface | UART | — |
| Protocol | USB | — |
| Encapsulado | 28-MLP (5 x 5 mm) | 28-QFN (5x5 mm) with exposed pad |
| Case / Package | 28-VFQFN exposed pad | — |
| Packaging | Cut Tape (CT) | — |
| Interface Function | USB 2.0 UART interface | — |
| Device Category | I/O controller interface IC | — |
| USB Speed | [DATA_NEEDED: USB operating speed] | — |
| Maximum UART Data Rate | [DATA_NEEDED: maximum UART baud rate] | — |
| Temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | -40 C to +85 C |
| UART Signal Levels | [DATA_NEEDED: UART signal-level specification] | — |
| ESD Protection | [DATA_NEEDED: ESD protection rating] | — |
| Estado RoHS | unknown | Compliant |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | not_applicable | — |
| Resistencia térmica | [DATA_NEEDED: exposed-pad thermal resistance] | — |
| Series | — | USBXpress |
| USB Standard | — | USB 2.0 Full-Speed (12 Mbps) |
| UART Interface | — | USB 2.0 UART |
| Number of UART Channels | — | 1 |
| Velocidad de datos | — | 300 baud to 1 Mbaud |
| Supply Voltage (VBUS) | — | 4.0 V to 5.25 V |
| Supply Voltage (VDD) | — | 3.0 V to 3.6 V |
| Internal Regulator Output | — | 3.3 V (up to ~100 mA) |
| Tipo de montaje | — | Surface Mount |
| GPIO | — | Yes (multiple, signal-configurable) |
| Reset Pin | — | RSTb (active-low hardware reset) |
| On-chip Oscillator | — | Yes (no external crystal required) |
| Nivel MSL | — | MSL3 (per JEDEC J-STD-020) |
| Host Driver | — | Silicon Labs CP210x VCP driver |