DRV8434ARGER vs DRV8434RGER Comparación
Comparación detallada lado a lado de DRV8434ARGER por Texas Instruments y DRV8434RGER por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
DRV8434RGER - 48V 2.5A Stepper Driver VQFN-24 | Texas Instruments
DRV8434RGER ✓ ActivoComparación de especificaciones
| Parámetro | DRV8434ARGER | DRV8434RGER |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Motor Drivers | Motor Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $2,65 | $2,79 |
| Motor Type | Bipolar stepper | Bipolar stepper (two-phase) |
| Number of H-Bridges | 2 | — |
| Configuración de salida | NMOS H-bridge | — |
| Supply Voltage (VM) | 4.5 V to 48 V | 4.5 V to 48 V |
| Full-Scale Output Current | 2.5 A per phase (peak) | — |
| RMS Output Current | 1.5 A per phase (typical) | — |
| Microstepping Resolution | Full-step to 1/256 step | Up to 1/256 |
| Current Sensing | Integrated (no external sense resistor) | Integrated (no external shunt) |
| Stall Detection | Yes (GPIO output) | — |
| Decay Mode | Smart Tune (mixed decay) | SmartTune (automatic), configurable |
| Control Interface | Step/Direction + SPI | STEP/DIRECTION (PWM optional) |
| Sleep Pin | Yes (nSLEEP, active low) | — |
| Fault Pin | Yes (nFAULT, active low, open-drain) | — |
| Protection Features | UVLO, OCP, OVP, OTP, open load, stall | — |
| Temperatura de funcionamiento | -40 C to +125 C | — |
| Encapsulado | VQFN-24 (RGE) 4x4 mm with thermal pad | VQFN-24 (RGE) 4x4 mm with thermal pad |
| Tipo de montaje | Surface Mount | Surface Mount |
| Nivel MSL | 2 (1 year floor life) | 2 (per JEDEC J-STD-020) |
| Estado RoHS | Compliant | Compliant |
| Continuous Output Current (per H-bridge) | — | 2.5 A |
| Peak Output Current | — | [DATA_NEEDED: peak current] |
| On-Resistance HS+LS (typ.) | — | [DATA_NEEDED: Rdson per bridge] |
| Sleep Current | — | 2 uA typical |
| Internal Reference Voltage | — | 3.3 V |
| Logic Input Voltage | — | 1.8 V, 3.3 V, 5.0 V compatible |
| PWM Off-Time Options | — | 7, 16, 24, 32 microseconds |
| Rango de temperatura de funcionamiento | — | -40 C to +125 C |
| Lead-Free / Halogen-Free | — | Yes / Yes |
| Spread Spectrum Clocking | — | Yes |