DRV8873HPWPRQ1 vs DRV8806PWPR Comparación
Comparación detallada lado a lado de DRV8873HPWPRQ1 por Texas Instruments y DRV8806PWPR por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
DRV8873HPWPRQ1 - Automotive 38V H-Bridge Motor Driver | TI
DRV8873HPWPRQ1 ✓ Activo
Comparación de especificaciones
| Parámetro | DRV8873HPWPRQ1 | DRV8806PWPR |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Motor Drivers | Motor Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $2,42 | $3,20 |
| Product Type | H-Bridge Motor Driver | — |
| Motor Type | Brushed DC | — |
| Number of H-Bridges | 1 | — |
| Supply Voltage Range | 4.5 V to 38 V | — |
| Peak Output Current | 10 A | — |
| Continuous Output Current | 3.5 A (estimated, derate with package temperature) | — |
| Rds(on) (HS + LS) | [DATA_NEEDED: Rds(on) per FET] | — |
| Control Interface | Hardwired (HW) / PH-EN / PWM | — |
| Current Sensing | Integrated (IPROPI proportional output) | — |
| Corriente en reposo | [DATA_NEEDED: Iq value] | — |
| Rango de temperatura de funcionamiento | -40 C to +125 C | — |
| Encapsulado | 24-pin HTSSOP (PWP) with PowerPAD | HTSSOP-16 (PWP) with PowerPAD |
| Tipo de montaje | Surface Mount | Surface Mount |
| AEC-Q100 Qualification | Qualified (automotive grade) | — |
| Nivel MSL | 2 (1 year floor life at <=30 C / 60% RH) | 2 |
| Lead-Free / REACH | Yes (compliant) | — |
| Estado RoHS | Compliant | Compliant |
| Protection Features | UVLO, OCP, TSD, automatic fault retry | — |
| Number of Channels | — | 4 (quad low-side) |
| Configuración de salida | — | Low-side DMOS, open drain |
| Supply Voltage (VM) | — | 8.2 V to 38 V |
| Continuous Output Current per Channel | — | 2 A |
| Peak Output Current per Channel | — | 3 A |
| RDS(on) per Channel | — | 200 mOhm (typical) |
| Interfaz | — | SPI (serial, 3.3 V logic) |
| Open-Load Detection | — | Yes, via SPI |
| Protección contra sobrecorriente | — | Yes, per channel |
| Apagado térmico | — | Yes |
| Undervoltage Lockout | — | Yes |
| Built-in Clamp Diodes | — | Yes (freewheeling) |
| Temperatura de funcionamiento | — | -40C to +85C |