EPC2LI20N vs EPC2LC20-U Comparación
Comparación detallada lado a lado de EPC2LI20N por Altera y EPC2LC20-U por Altera. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | EPC2LI20N | EPC2LC20-U |
|---|---|---|
| Marca | Altera | Altera |
| Categoría | Memory ICs | Memory ICs |
| Estado del ciclo de vida | Obsolete | Obsolete |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $5,10 | $9,60 |
| Tipo de memoria | Non-volatile configuration PROM (Flash) | Configuration PROM (Flash, in-system programmable) |
| Tamaño de memoria | 1.6 Mbit | 1.6 Mbit |
| Programmable Type | In System Programmable (ISP via JTAG) | — |
| Configuration Mode | Serial | — |
| Maximum Configuration Frequency | 10 MHz | — |
| Supply Voltage (VCCINT) | 3.0 V to 3.6 V | — |
| Supply Voltage (VCCIO) | 4.5 V to 5.5 V | — |
| Encapsulado / Carcasa | 20-PLCC (J-Lead), 9x9 mm | — |
| Tipo de montaje | Surface Mount | Surface Mount |
| Packaging | Tube | — |
| Temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: full operating temperature range] |
| Supported FPGA Series | ACEX 1K, APEX II, Cyclone, Stratix II | — |
| JTAG Interface | IEEE 1149.1 boundary scan (TCK/TDI/TMS/TDO) | — |
| Configuration Pins | nCS, DCLK, DATA, nCONFIG, nSTATUS, CONF_DONE | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| Interfaz | — | Serial (4-wire Altera configuration) + JTAG (IEEE 1149.1) |
| Max Configuration Clock | — | 10 MHz |
| Supply Voltage (VCC) | — | 3.3 V (3.0 V to 3.6 V) |
| Programmable | — | In-system via JTAG |
| Cascade Support | — | Yes (multi-PROM for larger bitstreams) |
| Encapsulado | — | 20-PLCC (9x9) |
| Supported FPGA Families | — | ACEX 1K, APEX 20K/20KC/20KE, APEX II, Arria GX, Cyclone, Cyclone II, FLEX 10K |
| JTAG Support | — | Yes (IEEE 1149.1 boundary-scan) |
| Lead-Free | — | [DATA_NEEDED: lead-free status] |
| Nivel MSL | — | [DATA_NEEDED: moisture sensitivity level] |