EPC80C100T vs EPC4QC100T Comparación
Comparación detallada lado a lado de EPC80C100T por Intel y EPC4QC100T por Altera. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | EPC80C100T | EPC4QC100T |
|---|---|---|
| Marca | Intel | Altera |
| Categoría | FPGA & CPLD | Memory ICs |
| Estado del ciclo de vida | NRND | NRND |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $25,40 | $10,25 |
| Product Type | Enhanced Configuration Device for SRAM-based LUT FPGAs | — |
| Manufacturer | Intel (formerly Altera) | — |
| Family | Enhanced Configuration (EPC) Devices | — |
| Memory Density | [DATA_NEEDED: density in Mbit] | 4 Mbit |
| Tensión de alimentación | 3.0 V to 3.6 V (3.3 V typical) | — |
| Configuration Modes | FPP, PPS, PPA, PS, JTAG | Serial (1-bit) and Parallel (x8) |
| JTAG Interface | IEEE 1149.1 in-system programming | — |
| Internal Oscillator | 50 MHz | — |
| Multi-Boot Pages | Up to 8 configuration pages | — |
| Page-Mode Read | Supported | — |
| In-System Programmability | Yes (continuous, via JTAG) | — |
| Encapsulado | 100-pin PQFP (T = tape and reel) | 100-pin PQFP (Plastic Quad Flat Pack), 20 x 14 mm |
| Compatible FPGA Families | APEX 20K, APEX II, Mercury, ACEX 1K, Cyclone, Stratix | — |
| Temperatura de funcionamiento | -40C to +85C (industrial, [DATA_NEEDED: confirm grade]) | -40 C to +85 C (industrial) |
| Estado RoHS | [DATA_NEEDED: verify from manufacturer page] | — |
| Lead-Free | [DATA_NEEDED: verify from manufacturer page] | — |
| Tipo de memoria | — | Flash configuration PROM (non-volatile) |
| Configuration Interface | — | Serial / x8 Parallel (selectable) |
| Maximum Serial Clock Frequency | — | 66 MHz |
| Supported FPGAs | — | Altera/Intel Cyclone, Stratix, APEX families |
| Supply Voltage (VCC) | — | 3.0 V to 3.6 V (3.3 V typ) |
| I/O Voltage (VCCIO / MultiVolt) | — | 1.8 V / 2.5 V / 3.3 V / 5.0 V |
| In-System Programming | — | IEEE 1149.1 JTAG + serial interface |
| JTAG Support | — | Yes (1149.1 boundary-scan compliant) |
| Daisy-Chain Support | — | Yes (EPC4-to-EPC4 only) |
| Tipo de montaje | — | Surface Mount |
| Lead-Free / RoHS | — | Lead-free; RoHS compliance depends on date code |
| Nivel MSL | — | 3 (per JEDEC J-STD-020) |