ICS502M vs ICS514M Comparación
Comparación detallada lado a lado de ICS502M por Renesas Electronics y ICS514M por Renesas Electronics. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | ICS502M | ICS514M |
|---|---|---|
| Marca | Renesas Electronics | Renesas Electronics |
| Categoría | Clock & Timing | Clock & Timing |
| Estado del ciclo de vida | Unknown | Activo |
| Product Type | LOCO PLL clock multiplier | — |
| Maximum Output Frequency | 190 MHz | 140 MHz |
| Input Clock Frequency Range | 2 MHz to 50 MHz | — |
| Supply Voltage Range | 3.0 V to 5.5 V | 3 V to 5.5 V |
| Jitter | 50 ps, 1 sigma | — |
| Duty Cycle | 45/55 through 160 MHz | — |
| Output Drive Capability | 25 mA at TTL levels | — |
| Process Technology | Advanced low-power CMOS | — |
| Encapsulado | 8-pin SOIC, 0.154 inch body width, 3.90 mm width | 8-SOIC (0.154 inch, 3.90 mm width) |
| Tipo de montaje | Surface mount | Surface Mount |
| Reference Input | Low-frequency crystal or clock input | — |
| Clock Architecture | Phase-locked loop | — |
| Output Functions | High-frequency clock output and reference | — |
| Logic Compatibility | TTL-level output drive | — |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | 0°C to 70°C |
| Estado RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Device Type | — | Clock Generator, Fanout Distribution IC |
| PLL Architecture | — | Single PLL |
| Número de salidas | — | 1 |
| Supported Reference Input | — | 14.31818 MHz crystal or clock input |
| Series | — | LOCO |
| PLL Disable Behavior | — | CLK output stops low when S1 = S0 = 0 |
| Reference Output During PLL Disable | — | Crystal oscillator and REF output remain active |
| Output Configuration Control | — | S1 and S0 control inputs |
| Input Pin Designation | — | I = Input; TI = Tri-Level Input; O = Output; P = Power Supply Connection |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Clock Output Jitter | — | [DATA_NEEDED: clock output jitter] |
| Clock Output Rise Time | — | [DATA_NEEDED: clock output rise time] |
| Clock Output Fall Time | — | [DATA_NEEDED: clock output fall time] |
| Corriente en reposo | — | [DATA_NEEDED: quiescent current] |