INA111APG4 vs INA111BU Comparación
Comparación detallada lado a lado de INA111APG4 por Texas Instruments y INA111BU por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
INA111APG4 - High-Speed FET-Input Instrumentation Amplifier | Texas Instruments
INA111APG4 ✓ ActivoTexas Instruments
INA111BU - 2 MHz FET-Input Instrumentation Amplifier | Texas Instruments
INA111BU ✓ ActivoComparación de especificaciones
| Parámetro | INA111APG4 | INA111BU |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Amplifier Type | Instrumentation amplifier | — |
| Number of Amplifier Circuits | 1 circuit | — |
| Internal Architecture | 3-op-amplifier design | — |
| Input Bias Current | 20 pA maximum | Less than 20 pA |
| Input Offset Voltage | 500 µV maximum | [DATA_NEEDED: input offset voltage] |
| Input Offset Voltage Drift | 5 µV/°C maximum | — |
| Common-Mode Rejection Ratio | 106 dB minimum | 106 dB |
| Bandwidth | 2 MHz | — |
| Gain | [DATA_NEEDED: gain range and gain-setting ratio] | — |
| Tipo de salida | Single-ended | — |
| Tensión de alimentación | [DATA_NEEDED: supply voltage range] | — |
| Corriente de alimentación | [DATA_NEEDED: supply current] | — |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | [DATA_NEEDED: output voltage swing] |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | -40 C to +85 C |
| Encapsulado | 8-pin plastic DIP | 16-pin SOIC |
| Tipo de montaje | Through-hole | Surface mount |
| Estado RoHS | RoHS compliant | [DATA_NEEDED: RoHS status] |
| Product Type | — | Instrumentation amplifier |
| Number of Amplifiers | — | 1 circuit |
| Input Transistor Type | — | FET-input |
| Gain-Bandwidth Product | — | 2 MHz |
| Slew Rate | — | 17 V/us |
| Supply Voltage Range | — | 6 V to 18 V |
| Maximum Supply Voltage | — | 18 V |
| Input Protection | — | [DATA_NEEDED: input protection rating] |
| Gain Range | — | [DATA_NEEDED: gain range] |
| Gain-Setting Resistor | — | [DATA_NEEDED: gain-setting resistor] |
| Corriente en reposo | — | [DATA_NEEDED: quiescent current] |
| Densidad de ruido | — | [DATA_NEEDED: noise density] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | Not applicable |