INA122U vs AD623ANZ Comparación
Comparación detallada lado a lado de INA122U por Texas Instruments y AD623ANZ por Analog Devices. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | INA122U | AD623ANZ |
|---|---|---|
| Marca | Texas Instruments | Analog Devices |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Product Type | Precision instrumentation amplifier | Instrumentation amplifier |
| Architecture | Two-op-amp design | — |
| Supply Voltage Range | 2.2 V to 36 V | 2.7 V to 12 V |
| Single-Supply Operation | 2.2 V to 36 V | — |
| Dual-Supply Operation | ±18 V | Supported |
| Corriente en reposo | 60 µA typical | — |
| Common-Mode Range | (V−) − 0.1 V | — |
| Output Swing | Rail-to-rail output swing | Rail-to-rail |
| Offset Voltage | 250 µV maximum | — |
| Offset Drift | 3 µV/°C maximum | — |
| Noise | Low noise | — |
| Circuit Count | 1 circuit | — |
| Encapsulado | 8-SOIC | 8-PDIP |
| Terminal Count | 8 terminals | — |
| Tipo de montaje | Surface mount | — |
| Application Category | Portable medical and data acquisition | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | Unknown |
| REACH Status | [DATA_NEEDED: REACH status] | Unknown |
| Nivel MSL | [DATA_NEEDED: MSL level] | — |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Number of Circuits | — | 1 circuit |
| Single-Supply Configuration | — | 3 V to 12 V |
| Gain Programming | — | Single external gain-set resistor |
| Lead Count | — | 8 leads |
| Input Signal | — | Differential |
| Common-Mode Handling | — | Instrumentation-amplifier input |
| Power Class | — | Low-cost, low-power instrumentation amplifier |
| Product Class | — | Rail-to-rail instrumentation amplifier |
| Pin Configuration | — | Industry-standard 8-lead instrumentation-amplifier configuration |
| AEC-Q100 Qualification | — | Not applicable |
| Gain Bandwidth | — | [DATA_NEEDED: gain bandwidth] |
| Input Noise Density | — | [DATA_NEEDED: input noise density] |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: common-mode rejection ratio] |