INA126UA vs INA126U Comparación
Comparación detallada lado a lado de INA126UA por Texas Instruments y INA126U por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
INA126UA - 36V Precision MicroPower Instrumentation Amplifier | TI
INA126UA ✓ ActivoComparación de especificaciones
| Parámetro | INA126UA | INA126U |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Amplifier Type | Single-channel precision instrumentation amplifier | — |
| Number of Channels | 1 channel | — |
| Maximum Supply Voltage | 36 V | — |
| Minimum Total Supply Voltage | 2.7 V | — |
| Dual-Supply Operating Range | ±1.35 V to ±18 V | — |
| Corriente en reposo | 175 µA per channel | 175 µA per channel |
| Input Offset Voltage | 250 µV maximum | — |
| Gain Bandwidth | 200 kHz | — |
| Common-Mode Rejection Ratio | 74 dB minimum | — |
| Architecture | Two-op-amp instrumentation amplifier | Two-op-amp design |
| Gain Configuration | External resistor configuration | External gain-setting resistor |
| Encapsulado | 8-pin SOIC | 8-pin SOIC, 3.90 mm width |
| Tipo de montaje | Surface mount | Surface mount |
| Signal Type | Differential input, single-ended output | Differential signal acquisition |
| Application Category | Low-noise differential signal acquisition | — |
| Estado RoHS | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | unknown | — |
| Device Type | — | Single-circuit micropower precision instrumentation amplifier |
| Maximum Total Supply Voltage | — | 36 V |
| Operating Supply Range | — | ±1.35 V to ±18 V |
| Offset Voltage | — | 250 µV |
| Circuit Count | — | 1 amplifier |
| Rango de temperatura de funcionamiento | — | [DATA_NEEDED: operating temperature range] |
| Gain-Bandwidth Product | — | [DATA_NEEDED: gain-bandwidth product] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode range] |
| Maximum Differential Input Voltage | — | [DATA_NEEDED: maximum differential input voltage] |
| Noise Voltage Density | — | [DATA_NEEDED: noise voltage density] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |