INA128PA vs INA129A Comparación
Comparación detallada lado a lado de INA128PA por Texas Instruments y INA129A por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
INA129A - Precision Instrumentation Amplifier | Texas Instruments
INA129A ✓ ActivoComparación de especificaciones
| Parámetro | INA128PA | INA129A |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Product Type | Precision instrumentation amplifier | Precision instrumentation amplifier |
| Architecture | Three-op-amp instrumentation amplifier | Three-op-amp instrumentation amplifier |
| Number of Circuits | 1 circuit | — |
| Encapsulado | 8-pin PDIP | 8-pin SOIC |
| Common-Mode Rejection Ratio | 130 dB | — |
| Minimum Common-Mode Rejection | 120 dB | 120 dB |
| Corriente en reposo | 700 µA | — |
| Maximum Input Offset Voltage | 50 µV | — |
| Maximum Input Voltage Drift | 0.5 µV/°C | — |
| Maximum Input Bias Current | 5 nA | 5 nA |
| Input Protection | ±40 V | ±40 V |
| Supply Range | Up to ±18 V | ±18 V |
| Gain Range | 1 to 10,000 | 1 to 10,000 |
| Gain Setting | Single external resistor | — |
| Bandwidth at Gain 100 | 200 kHz | 200 kHz |
| Green Product | Yes | — |
| Restricted Substances | No Sb/Br | — |
| Temperatura de funcionamiento | -40°C to +85°C | — |
| Tipo de montaje | Through-hole | Surface mount |
| Maximum Offset Voltage | — | 50 µV |
| Maximum Input Offset Drift | — | 0.5 µV/°C |
| Low-Power Design | — | Low-power general-purpose instrumentation amplifier |
| Input Circuit | — | Current-feedback input circuitry |
| External Gain Setting | — | Single external resistor |
| Application Class | — | Precision analog signal conditioning |
| Estado RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |