INA129U vs INA114AU Comparación
Comparación detallada lado a lado de INA129U por Texas Instruments y INA114AU por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | INA129U | INA114AU |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Product Type | Precision, low-power instrumentation amplifier | — |
| Architecture | Three-op-amp instrumentation amplifier | — |
| Supply Range | ±2.25 V to ±18 V | — |
| Maximum Supply | ±18 V | — |
| Gain-Bandwidth Product | 1.3 MHz | 1 MHz |
| Bandwidth at G = 100 | 200 kHz | — |
| Maximum Offset Voltage | 50 µV | 50 µV |
| Maximum Offset Drift | 0.5 µV/°C | — |
| Maximum Input Bias Current | 5 nA | 2 nA |
| Minimum Common-Mode Rejection | 120 dB | 115 dB |
| Input Protection | ±40 V differential inputs | — |
| Gain Range | 1 to 10,000 | 1 to 10,000 |
| Gain-Setting Resistor | 49.4 kΩ reference resistor | — |
| Rango de temperatura de funcionamiento | -40°C to +85°C | -40°C to +85°C |
| Encapsulado | 8-pin SOIC | 16-pin SOIC, 3.9 mm wide |
| Circuit Count | 1 amplifier | — |
| Corriente en reposo | [DATA_NEEDED: low quiescent current value] | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | — |
| Amplifier Type | — | Single-amplifier precision instrumentation amplifier |
| Input Noise | — | 11 nV/√Hz |
| Maximum Offset Voltage Drift | — | 0.25 µV/°C |
| Input Overvoltage Protection | — | ±40 V |
| Maximum Supply Voltage | — | ±18 V |
| Minimum Supply Voltage | — | ±2.25 V |
| Maximum Quiescent Current | — | 3 mA |
| Slew Rate | — | 0.06 V/µs |
| Tipo de montaje | — | Surface mount |
| Internal Architecture | — | Three-op-amp instrumentation amplifier |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance status] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |