ITS4040DEPDXUMA1 vs ITS4130QEPDXUMA1 Comparación
Comparación detallada lado a lado de ITS4040DEPDXUMA1 por Infineon y ITS4130QEPDXUMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | ITS4040DEPDXUMA1 | ITS4130QEPDXUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $2,12 | $1,88 |
| Product Type | Dual-Channel Smart High-Side Power Switch (PROFET) | — |
| Topología | 1:1 High-Side (N-Channel MOSFET, two channels) | High-Side Power Switch (1:1) |
| Number of Channels | 2 (independent) | 4 (Quad) |
| Operating Voltage Range | -0.3 V to 45 V (load-dump tolerant) | — |
| Typical On-State Resistance per Channel (RDS(ON)) | 60 mΩ at TJ = 125 °C | — |
| Continuous Load Current per Channel | >2 A | — |
| Combined Peak Capability | 4.1 A (per datasheet summary) | — |
| Per-Channel Current Limit (typ.) | 2.6 A | — |
| On/Off Input Interface | Logic-level GPIO compatible (3.3 V / 5 V) | — |
| Diagnostic Output | Current-sense (IS) pin, proportional to load current | Yes (status/feedback pin) |
| Integrated Protection | Over-current, over-voltage, over-temperature, short-to-ground, short-to-battery, reverse battery | — |
| Encapsulado | PG-TSDSO-14 (exposed pad) | PG-TSDSO-14 (14-pin, exposed pad) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Operating Temperature (TJ) | -40 °C to +150 °C (typical automotive PROFET range) | — |
| Estado RoHS | Compliant | Compliant |
| On-State Resistance RDS(ON) | — | 130 mΩ (typ at Tj=25°C), 205 mΩ (typ at Tj=125°C) |
| Per-Channel Current | — | 650 mA (DC, per channel) |
| Load-Dump Tolerance | — | 45 V |
| Switch Type | — | N-Channel MOSFET |
| Temperatura de funcionamiento | — | -40C to +125C (Tj) |
| Fault Protection | — | Over-current, Over-temperature, Over-voltage, Open-load detection |
| Reverse Polarity Protection | — | Achievable with external 150Ω GND resistor or GND diode+27Ω series resistor |
| Family | — | PROFET Industrial (ITS41xxQ-EP-D series) |
| Product Status | — | Active / Production |
| Nivel MSL | — | MSL3 (per Infineon package handling guidelines) |