ITS42K5DLDFXUMA1 vs BTS3011TEATMA1 Comparación
Comparación detallada lado a lado de ITS42K5DLDFXUMA1 por Infineon y BTS3011TEATMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | ITS42K5DLDFXUMA1 | BTS3011TEATMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $1,68 | $0,51 |
| Switch Type | High-side, dual channel | — |
| Número de salidas | 2 | — |
| Topología | 1:1 (one input per output) | — |
| Configuración de salida | P-Channel high-side | — |
| Continuous Output Current (per channel) | 250 mA | — |
| On-State Resistance (Rds(on)) | 2.5 ohm typical | — |
| Supply Voltage (Vbb) | 5 V to 13.5 V (operating); 24 V load-dump tolerant | — |
| Overvoltage Clamp | Integrated | — |
| Freewheeling Diode | Integrated per channel | — |
| Protection Features | Overload, short-circuit, thermal shutdown, overvoltage | — |
| Diagnostic Output | Status feedback | Open-drain status feedback pin |
| Rango de temperatura de funcionamiento | -40 C to +125 C (junction) | — |
| Encapsulado | PG-TSON-10-2 (TSON Exposed Pad) | PG-TO252-5 (DPAK-5) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Family | PROFET 24V/48V Smart High-Side Switch | — |
| Estado RoHS | Compliant | Compliant |
| Product Type | — | Smart Low-Side Power Switch |
| Number of Channels | — | 1 |
| On-Resistance R_DS(on) (typ.) | — | 11 mΩ |
| Continuous Load Current | — | 10 A |
| Operating Voltage Range | — | 3 V to 28 V |
| Switch Technology | — | N-channel vertical power MOSFET |
| Input Type | — | Logic-level CMOS compatible |
| Número de pines | — | 5 (4 + Tab) |
| Temperatura de unión de funcionamiento | — | -40 °C to +150 °C |
| ESD Protection (HBM) | — | ±8 kV (output pin) |
| AEC-Q100 Qualification | — | Grade 1 qualified |
| Integrated Protections | — | Current limit, overtemperature shutdown, overvoltage clamp, ESD, ground-loss protection |